Pasar al contenido principal

DISEÑO DE PROCESOS DE SINTERIZACION EN FRIO PARA NUEVOS MATERIALES NANOESTRUCTURADOS.

MAT2017-86450-C4-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 62
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Visualizing Microorganism-Mineral Interaction in the Iberian Pyrite Belt Subsurface: The Acidovorax Case

  • Escudero, C.
  • Del Campo, Adolfo
  • Ares, J. R.
  • Sánchez, C.
  • Martínez Lozano, José Manuel
  • Gómez, Felipe
  • Amils Pibernat, R.
  • Lorente Sánchez, Cristina
Despite being considered an extreme environment, several studies have shown that life in the deep subsurface is abundant and diverse. Microorganisms inhabiting these systems live within the rock pores and, therefore, the geochemical and geohydrological characteristics of this matrix may influence the distribution of underground biodiversity. In this study, correlative fluorescence and Raman microscopy (Raman-FISH) was used to analyze the mineralogy associated with the presence of members of the genus Acidovorax, an iron oxidizing microorganisms, in native rock samples of the Iberian Pyrite Belt subsurface. Our results suggest a strong correlation between the presence of Acidovorax genus and pyrite, suggesting that the mineral might greatly influence its subsurface distribution., The authors acknowledge financial support from the Spanish AEI, Project MDM-2017-0737 Unidad de Excelencia "Maria de Maeztu"-Centro de Astrobiologia (INTA-CSIC), the Spanish MINECO, Project MAT2017-86450-C4-1-R and the Spanish MICINN, Projects PID2019-104812GB-I00 and RTI2018-099794-B-I00., Peer review
Docta Complutense
Publicación Artículo científico (JournalArticle)

Ultrasensitive NO_(2 )gas sensor with insignificant NH3-interference based on a few-layered mesoporous graphene

  • Matatagui Cruz, Daniel
  • López Sánchez, Jesús
  • Peña Moreno, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez De La Fuente, Óscar
  • Carmona Tejero, Noemí
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
  • Horrillo, María del Carmen
Few-layered mesoporous graphene (FLMG) is employed as a sensing material to develop an innovative and high-sensitivity room temperature NO_(2) sensor through a simple manufacturing process. For this purpose, sensing material is optimized at 100 min by a high-energy milling process where natural graphite is used as a precursor: it is an inexpensive, sustainable and suitable active material. The large number of defects created and the enhanced degree of mesoporosity produced during the milling process determine the physical principles of operation of the designed device. NO_(2) gas sensing tests reveal an improved and selective performance with a change in resistance of ∼16 % at 0.5 ppm under ultraviolet photo-activation, establishing a detection limit around ∼25 ppb. Interestingly, the response of the developed sensor to humidity is independent in the measured range (0–33 % relative humidity at 25 °C) and the dependency to the presence of NH3 is rather poor as well (∼1.5 % at 50 ppm).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Improvement of thermal efficiency in cement mortars by using synthetic feldspars

  • Torres Carrasco, Manuel
  • Enríquez, E.
  • Terrón-Menoyo, L.
  • Cabrera, M.J.
  • Muñoz, D.
  • Fernández, J.F.
The use of white cements as a building material is widely employed due to its high whiteness and reflectance. However, building materials should adopt better thermal insulation characteristics to contribute for a significant urban heat-islands mitigation. In this work, synthetic feldspar has been evaluated as partial and total replacement of sand in white cement mortars. Thermal, mechanical, and optical properties of these new mortars are characterized by thermal conductivity, compression resistance test and reflectance-colorimetry, respectively. The replacement of sand by synthetic feldspar allows to obtain white mortars having [almost equal to]18% improvement in solar reflectance. Experiment under solar irradiance of mortars having synthetic feldspars reduce the surface heating of the mortar in 25% and the heating transmission to the rear of the mortar in >55%. Moreover, the high crystallinity of the synthetic feldspar reduces the mortar expansion due alkali-silica reactions (ASR). Improvement in reflectance and thermal conductivity resistance of white cement mortar having synthetic feldspar opens a wide range of building material applications., The authors express their thanks to the Project MAT-2017-86450-C4-1-R, CSIC NANOMIND project CSIC2015-60E068 and projects CDTI (IDI-20130894 and IDI-20161120) for their financial support. Dra. E. Enríquez is indebted to MINECO for a "Torres Quevedo" contract (ref: PTQ-14-07289), which is co-financed with European Social Funds. Dr. M. Torres-Carrasco is also indebted to MINECO for a postdoctoral fellowship "Juan de la Cierva-Formación" (ref: FJCI-2016-28488).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Towards more sustainable building based on modified Portland cements through partial substitution by engineered feldspars

  • Enríquez, E.
  • Torres Carrasco, Manuel
  • Cabrera, M.J.
  • Muñoz, D.
  • Fernández, J.F.
Global warming is one of the main problems that facing modern civilization. As buildings consume 40% of total energy, the heating in the cities is a primary concern. Therefore, it seeks to improve sustainable construction materials with better thermal and reflective properties, reducing consumption and heat islands. In this work, mineral and engineered feldspars have been used as partial substitution of white cement, that is widely used in the cladding of façades mainly due to its high whiteness, to improve composites' reflectance and reducing their thermal conductivity. Both feldspars show pozzolanic effect and new composites have superior whiteness and reflectance (greater than12%). Moreover, the engineered feldspar avoids the alkali-silica reaction (ASR) effect in spite of its alkaline content. A reduction of heat of greater than 2 °C after 6 h of solar irradiance is demonstrated for engineered feldspar composite resulting in a good alternative for their implementation as exterior insulation and finish systems., The authors express their thanks to the Project MAT-2017-86450-C4-1-R, CSIC NANOMIND project CSIC2015-60E068 and projects CDTI (IDI-20130894 and IDI-20161120) for their financial support. Dra. E. Enriquez is also indebted to MINECO for a "Torres Quevedo" contract (ref: PTQ-14-07289), which is co-financed with European Social Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A step ahead on efficient microwave heating for kaolinite

  • Reinosa, J. J.
  • Fernández Lozano, J. F.
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
[EN] The thermal evolution of kaolin clay under microwave radiation shows an unexpected large heating rate up to 500 degrees C/min for temperatures > 650 degrees C. Such heating rate is associated with a resistivity drop of > 10(3) Omega.m observed after the dehydroxylation process of the kaolin structure. The high efficiency of the microwave heating effect is correlated with the presence of surface carriers that absorbs microwaves electromagnetic field. The layered structure of the clay-based materials allows the appearance of charge carriers at the surface of the crystal lattice that is electromagnetically activated. This effect represents a breakthrough in the efficient use of microwaves energy in order to produce efficient thermal treatments in large volume of non-metallic minerals with a drastic reduction of the greenhouse gasses for mass production industries., The authors express their thanks to the project MAT-2017-86450-C4-1-R from the Spanis Goverment for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasible glass-melting process assisted by microwaves

  • Jiménez Reinosa, Julian
  • López-Buendía, Ángel M.
  • Guaita, Luis
  • Fernández, Jose F.
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
[EN] The advantages of microwave (MW) energy processing have been verified in the sintering of a ceramic frit at a pre-industrial scale. The challenge of achieving high temperature using MW energy at such dimensions was overcome and a mix of natural raw materials was heated until its fluxing point. Changes in dielectric properties of the raw materials mix were also measured in situ with the increase in temperature, being in accordance to thermal processes of a conventional heating process. The properties of the resulting ceramic frit were compared with the same frit obtained by the conventional sintering method. Both frits showed similar thermal behavior regarding DTA-TGA, heating microscopy and XRD (only glassy phase was present). A Raman study confirms the existence of the mentioned glass phase. The application of the frits as glazes were performed and their properties were studied. As a result, glazes with similar properties were obtained which confirms that the MW energy processed frit is suitable for its application as a ceramic glaze., Consejo Superior de Investigaciones Cientificas, Grant/Award Number: CSIC201560E068; Ministerio de Ciencia, Tecnologia e Innovacion Productiva, Grant/Award Number: MAT2017-86450-C4-1-R; Seventh Framework Programme, Daphne Project, Grant/Award Number: 314636
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature Assessment Of Microwave-Enhanced Heating Processes

  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Jimenez-Reinosa, Julian
  • Fernandez, José F.
[EN] In this study, real-time and in-situ permittivity measurements under intense microwave electromagnetic fields are proposed as a powerful technique for the study of microwave-enhanced thermal processes in materials. In order to draw reliable conclusions about the temperatures at which transformations occur, we address how to accurately measure the bulk temperature of the samples under microwave irradiation. A new temperature calibration method merging data from four independent techniques is developed to obtain the bulk temperature as a function of the surface temperature in thermal processes under microwave conditions. Additionally, other analysis techniques such as Differential Thermal Analysis (DTA) or Raman spectroscopy are correlated to dielectric permittivity measurements and the temperatures of thermal transitions observed using each technique are compared. Our findings reveal that the combination of all these procedures could help prove the existence of specific non-thermal microwave effects in a scientifically meaningful way., The authors wish to thank the project MAT2017-86450-C4-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembly of iron oxide precursor micelles driven by magnetic stirring time in sol–gel coatings

  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Abuín, M.
  • Salas, Eduardo
  • Muñoz-Noval, A.
  • Castro, Germán R.
  • de la Figuera, Juan
  • Marco, J.F.
  • Marín, Pilar
  • Carmona, N.
  • Rodríguez de la Fuente, Óscar
  • AMPHIBIAN Project ID:720853
[EN] The purpose of this work is to fabricate self-assembled microstructures by the sol–gel method and study the morphological, structural and compositional dependence of 3-Fe2O3 nanoparticles embedded in silica when glycerol (GLY) and cetyl-trimethylammonium bromide (CTAB) are added as steric agents simultaneously. The combined action of a polyalcohol and a surfactant significantly modifies the morphology of the sample giving rise to a different microstructure in each of the studied cases (1, 3 and 7 days of magnetic stirring time). This is due to the fact that the addition of these two compounds leads to a considerable increase in gelation time as GLY can interact with the alkoxide group on the surface of the iron oxide precursor micelle and/or be incorporated into the hydrophilic chains of CTAB. This last effect causes the iron oxide precursor micelles to be interconnected forming aggregates whose size and structure depend on the magnetic stirring time of the sol–gel synthetic route. In this paper, crystalline structure, composition, purity and morphology of the sol–gel coatings densified at 960 ºC are examined. Emphasis is placed on the nominal percentage of the different iron oxides found in the samples and on the morphological and structural differences. This work implies the possibility of patterning 3-Fe2O3 nanoparticles in coatings and controlling their purity by an easy one-pot sol–gel method., Spanish Ministry of Industry, Economy and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, by the Comunidad de Madrid S2013/MIT-2850 NANOFRONTMAG and H2020 AMPHIBIAN Project ID: 720853. The authors are also grateful to the BM25-SpLine staff for their valuable technical support beyond their duties and for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant No. PIE 2010- 6OE-013, The ESRF – The European Synchrotron, MICIU and CSIC are acknowledged for provision of synchrotron radiation facilities. A. S. acknowledges the Financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Microstructured Surfaces with pH-Triggered Antibacterial Properties

  • Campo, Ángel Adolfo del
  • Echeverría, Coro
  • San Martín, Miguel
  • Cuervo-Rodríguez, Rocío
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
New antibacterial films are designed with the capability to reversibly regulate their killing and repelling functions in response to variations in environmental pH. These systems consist of porous polystyrene surfaces as the main components and a copolymer bearing pH-sensitive thiazole and triazole groups as the minor components. These pH-sensitive groups, located on the surfaces, can be partially protonated at acidic pH levels, increasing the positive charge density of the surfaces and their antibacterial activity. Similarly, their bacterial adhesion and killing efficiencies in response to changes in pH are evaluated by analyzing the bacterial viability of Staphylococcus aureus bacteria on the surfaces under acidic and neutral pH values. It is demonstrated that after only 1 h of incubation with the bacterial suspension in acidic conditions, the surfaces killed the bacteria, while at pH = 7.4, some of the adhered bacteria are removed. Furthermore, the surface topography exerts an important role by intensifying this response., This work was supported financially by the MINECO (Project MAT2016- 78437-R and Project MAT2017-86450-C4-1-R), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (Project 201760I064). C.E. also acknowledges MINECO for her IJCI-2015-26432 contract, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogels based on oxidized starches from different botanical sources for release of fertilizers

  • León, O.
  • Soto, Diana
  • Antúnez, A.
  • Fernández, R.
  • González, Jesús
  • Piña, C.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Herein, hydrogels based on starch from corn, sweet cassava and bitter cassava were prepared by a straightforward approach. The hydrogels were obtained by an oxidation process using the redox system KMnO/NaHSO which leads to the formation of carbonyl and carboxyl groups with minimum polymer hydrolysis. The resulting oxidized samples as well as the native starches were extensively characterized by scanning electron microscopy, thermogravimetric analysis and wide angle X-ray scattering, among others. High gel fraction values and low degree of crystallinity were obtained in all the cases, which values vary slightly depending on the botanical source. High swelling capacity was observed for all the samples, which behave as hydrogels. The influence of the ionic strength and pH in the swelling capacity of the oxidized starches was also studied. The samples exhibit an anti-polyelectrolyte behavior and the water uptake increases at basic pH as the carboxylic groups become ionized. The hydrogels were also loaded with urea, potassium nitrate and ammonium sulfate as model fertilizers and their potential for controlled release was investigated., Authors want to acknowledge the Universidad del Zulia for the financial support, in particular CONDES-LUZ and also the MINECO (Project MAT2016-78437-R and Project MAT2017-86450-C4-1-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Materiales jerarquizados de ZNO para potenciar la respuesta antimicrobiana

  • Lucas-Gil, Eva de
[EN] The last few years concern about the inadequate use of the antimicrobial agents is provoking a growing threat of resistant organisms to these antibiotics. Innovation in action mechanisms is key issue in obtaining new effective antimicrobial agents. Here, the guidelines for inhibiting, enhancing and/or combining chemical and physical interactions in the antimicrobial response of the material through morphological modulation are established. Understanding the existing role between morphology and antimicrobial activity opens the gate to a future generation of antimicrobial agents with tuned action mechanisms to combat resistant microorganisms., [ES] La preocupación de los últimos años sobre el uso inadecuado de los agentes antimicrobianos está provocando una creciente amenaza de organismos resistentes a estos antibióticos. Un punto clave en la obtención de nuevos agentes antimicrobianos efectivos es la innovación en los mecanismos de acción. En este trabajo se establecen las pautas para inhibir, potenciar y/o combinar las interacciones químicas y físicas en la respuesta antimicrobiana del material mediante la modulación morfológica. La comprensión del rol que existe entre la morfología y la actividad antimicrobiana abre la puerta hacia una generación futura de agentes antimicrobianos con mecanismos de acción sintonizados para combatir los microorganismos resistentes., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnO Nanoporous Spheres with Broad-Spectrum Antimicrobial Activity by Physicochemical Interactions

  • Lucas-Gil, Eva de
  • Leret, Pilar
  • Monte-Serrano, Mercedes
  • Jiménez Reinosa, Julián
  • Enríquez Pérez, Esther
  • Campo, Ángel Adolfo del
  • Cañete, Magdalena
  • Menéndez, Javier
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
The extensive range of applications where synthetic nanomaterials are nowadays used is causing a huge commercial market. An incipient use of these nanomaterials arises from the need to generate alternative antimicrobial agents, anticipating the development of resistant micro- organisms. Here, we show a nanostructured ZnO with antimicrobial properties and low cytotoxicity based on a nanoparticle¿s arrangement by controlling the formation of sintering neck into nanoporous spheres. The antimicrobial effectiveness of ZnO spheres is tested in a broad spectrum of microorganisms such as fungi as well as Gram-negative and Gram-positive bacteria. The hierarchical structures show highly effective antimicrobial activity at low concentrations and in relatively short action times (24¿72 h). We demonstrate that the enhanced antimicrobial properties against microorganisms are ascribed to a combining of both physical and chemical interactions between microorganism and ZnO. The approximation mechanism between microorganism and ZnO is provided through electrostatic forces (physical interaction) which, thanks to the ZnO¿microorganism proximity, promote a rapid release of zinc cations and the reactive oxygen species penetration into microorganisms (chemical interaction). We believe that this work provides insights into the mechanisms underlying the interactions ZnO¿microorganism and possesses a combined action mechanism for which nanostructured ZnO is so effective to combat microorganisms., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the projects MAT2017-86450-C4-1-R, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. Dr. P. Leret is also indebted to MINECO for a “Torres Quevedo” contract (ref: PTQ-12-05470), which is cofinanced with European Social Fund. Dr. E. Enriquez is also indebted to MINECO for a ‘‘Torres Quevedo’’ contract (ref: PTQ-14-07289), which is co-financed with European Social Fund. Dr. F. R-M is also indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social. The authors acknowledge the ESRF The European Synchrotron and the SpLine CRG BM25 beamline staff for provision of synchrotron radiation and for assistance during X-ray diffraction measurements (ref: 25-01-966). Finally, authors are grateful to Aida Serrano and Rocío Estefanía Rojas-Hernandez for scientific and technical advice in XANES measurements, Mª José Velasco and Pilar Ortega for ICP-OES measurements, Alexandra Muñoz-Bonilla for scientific advice and Laura Pascual for scientific and technical advice, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The fight against multidrug-resistant organisms: The role of ZnO crystalline defects

  • Lucas-Gil, Eva de
  • Campo, Ángel Adolfo del
  • Pascual, Laura
  • Monte-Serrano, Mercedes
  • Menéndez, Javier
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
This article reports the excellent antimicrobial response of nanoparticulate ZnO against multidrug-resistant organisms (MDROs). We demonstrate that the enhanced antimicrobial activity against MDROs depends on the crystalline defects of ZnO. Hence, this work provides insights on the ZnO-microorganism interactions, and we pose combined physico-chemical action mechanisms against resistant bacteria., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the projects MAT2017-86450-C4-1-R, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. Dr. F. Rubio-Marcos is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. Finally, authors are grateful to Mª José Velasco and Pilar Ortega for ICP-OES measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards blue long-lasting luminescence of Eu/Nd-doped calcium-aluminate nanostructured platelets via the molten salt route

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Serrano Rubio, Aída
  • Salas, Eduardo
  • Hussainova, Irina
  • Fernández Lozano, José Francisco
Calcia-alumina binary compounds doped with rare earths and some transition metals cations show persistent luminescence from the visible to the infrared range. Specifically, the blue light can be obtained through the Eu2+ activator center in a potential host, such as dodecacalcium hepta-aluminate (Ca12Al14O33) and monocalcium aluminate (CaAl2O4). By doping with Nd3+, the persistent luminescence can be substantially prolonged; for this reason, the Eu/Nd pair is a potential choice for developing long-lasting blue luminescence. Herein, the phase evolution of the calcia-alumina system via molten salt synthesis is reported as a function of the synthesis temperature and the atmospheric environment. The fraction of CaAl2O4 phase increases when the temperature is higher. Synthesized microparticles of platelet-type morphology represent isolated nanostructured ceramic pieces. Under visible light, the particles are white. This indicates that the followed process solves the dark-gray coloring of phosphor when is synthesized in a reduced atmosphere at high temperature. As regards the synthesis mechanism, which is assisted by the molten flux, the dissolution−diffusion transport process is promoted at the surface of the alumina microparticles. In fact, the emission intensity can be modulated through the phase of the Eu-doped calcium-aluminate discrete platelets synthesized. Consequently, the photoluminescence intensity depends also on the oxidation state of the Eu ion. X-ray absorption near-edge structure and photoluminescence measurements corroborate the Eu reduction and the grain coarsening with the enhancement of the blue emission. The doped phosphors with Eu/Nd show a broad and strong absorption in the region of 320–400 nm and a broad emission band at around 440 nm when they are excited in this absorption range. From a broader perspective, our findings prove that the Ca12Al14O33 and CaAl2O4 phases open new opportunities for research into the design of blue long-lasting emitters for a wide range of fields from ceramic to optoelectronic materials., This work was supported by the Spanish Ministry of Science Innovation and Universities (MICIU) under the projects MAT2017-86450-C4-1-R and RTI2018-095303-A-C52, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. R.E.R.-H. acknowledges the financial support of the Mobilitas Pluss program in the framework of the MOBJD254 project. F.R.-M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F.R.-M. also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395). The support of ETAG through PUT1063 (I. Hussainova) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of thermal stability of 2D and 3D CoAl2O4 particles in core-shell nanostructures by Raman spectroscopy

  • Álvarez-Docio, Carmen M.
  • Jiménez Reinosa, Julián
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
We are studying the formation of a nanostructured spinel CoAlO layer on α-AlO giving rise to a core-shell composite. In the final product, two mechanisms of CoAlO crystallization onto a α-AlO microparticle surface are observed, depending on the dispersion grade of CoO: a 3D nanostructure from the arrangement of CoO agglomerated nanoparticles; 2D nanoparticles from the diffusion mechanism of isolated CoO nanoparticles. As a consequence, two different crystallization pathways may occur during the thermal treatment. In order to understand the formation mechanisms a Raman Confocal Study is performed. The features of the Raman spectra of the samples depend strongly on the morphology of the nanoparticles located in the shell of the microparticle. Average spectra of the samples show a variation in the Raman shift between the different samples. The differences between 3D or 2D structures is associated with the transmission of phonons among the nanoparticles. The high absorbance of the cobalt species could mask the Raman shift displacement by local heating, so both the temperature and the laser source power are considered in the Raman study. The evolution of the Raman spectra with applied temperature indicates a decoupling of the Raman modes. This fact is more relevant for the 3D aggregates in which nanoparticles produced a larger scattering of phonons and a higher sensitivity to temperature variation. These results clearly indicate that extrinsic parameters such as the size of the crystals and their aggregation state affects their Raman properties., Projects NANOMIND CSIC201560E068 and MAT2017-86450-C4-1-R for their financial support. C.M. Alvarez-Docio is also indebted to MINECO for a Predoctoral Grant (BES-2014-069779).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the Role of the Intermediates during the Synthesis of BaTi5O11

  • Álvarez-Docio, Carmen M.
  • Jiménez Reinosa, Julián
  • Canu, Giovanna
  • Buscaglia, Marría Teresa
  • Buscaglia, Vincenzo
  • Fernández Lozano, José Francisco
[EN] BaTiO has been extensively studied because of their microwave dielectrics properties. Traditionally, it is difficult to achieve this material as single-phase. Here, we report an effective method to obtain BaTiO powder with nanometer-scale crystals, by solid-state reaction at moderate temperatures and using as precursors nanostructured particles consisting of BaTiO and TiO. The main advantage is the intimate contact between the BaTiO and TiO that ensure, when the solid-state reaction takes place, the formation of complex solid compounds from three or more constituents. The formation mechanism of BaTiO has been studied as a function of both the thermal treatment and the time reaction. The reaction was monitored by Raman spectroscopy combined with Confocal microscopy, the aim of this characterization technique is to provide the description of the general strategy and design principles to obtain BaTiO powder. Consequently, this work is a challenging task for the compositional and structural study of complex inorganic nanoparticles., The authors express their thanks to the projects NANOMIND CSIC201560E068 and MAT2017-86450-C4-1-R for their financial support. C.M.A.-D. is also indebted to MINECO for a Predoctoral Grant (BES-2014-069779), which is cofinanced with FEDER funds. C.M.A.-D. is grateful to MINECO for a short stay scholarship (EEBB-I-16-11587).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pt-free CoAl2O4catalyst for soot combustion with NOx/O2

  • Álvarez-Docio, Carmen M.
  • Portela, Raquel
  • Jiménez Reinosa, Julián
  • Rubio Marcos, Fernando
  • Granados-Miralles, Cecilia
  • Pascual, Laura
  • Fernández Lozano, José Francisco
[EN] Cobalt aluminate spinel compounds prepared by different methods were characterized in terms of crystallinestructure, morphology, textural properties and acidity, and evaluated as catalysts for diesel soot combustion inNOx/O2mixtures. The activation of commercial CoAl2O4microparticles by ball milling reduced the onsettemperature of this material considerably and yielded an efficient catalyst for soot combustion that exhibited atemperature of half conversion, 411 °C, similar to that obtained with the reference Pt/Al2O3catalyst. Moreover,like Pt, the milled CoAl2O4suppressed the CO formation observed in non-catalytic soot combustion. The sig-nificant modification of the particle size, the emergence of new exposed crystal facets and the creation of defectsare responsible for the appearance of new active sites and high acidity that improved catalyst-to-soot contact andreactivity. Thefindings open a new gate toward the use of efficient Pt-free catalyst for soot combustion., The authors express their thanks to the project NANOMINDCSIC201560E068 and MAT2017-86450-C4-1-R for their financial support. C.M. Alvarez-Docio for a FPI grant BES-2014-069779, which are co-financed with FEDER funds. F.Rubio-Marcos is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F. Rubio-Marcos also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct and inverse spin Hall effects: Zeeman energy

  • Hernando, Antonio
  • García García-Tuñón, Miguel Ángel
  • Gálvez, F.
  • Guinea, Francisco
  • AMPHIBIAN Project ID:720853
It is shown that magnetic forces as the force exerted on electron spins at rest, account for both the transverse spin imbalance typical of spin Hall effect and the transverse charge imbalance associated with pure spin currents (inverse spin Hall effect). Considering that for stationary currents the laboratory reference frame, and those for which the spin up and spin down carriers are at rest, are inertial systems one can easily find the forces exerted by the lattice on both spin sub-bands, as well as the force between sub-bands., The authors are indebted to P. Echenique, J. Hirsch, V. Golovach, A. Arnau and J. M. Rojo for many fruitful discussions. This work has been supported by the Spanish Ministry of Innovation, Science and Technology and Spanish Ministry of Economy and Competitiveness through Research Projects MAT2015-67557-C2-1-P, MAT2017-86450-C4-1-R S2013/MIT-2850 NANOFRONTMAG, RTI2018-095856-B-C21, by the European Commission AMPHIBIAN (H2020-NMBP-2016-720853) and by the Comunidad de Madrid S2018/NMT-4321 NANOMAGCOST-CM., Peer reviewed, preprint
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin imbalance of charge carriers induced by an electric current

  • Hernando, Antonio
  • Gálvez, Fernando
  • García García-Tuñón, Miguel Ángel
  • Guinea, Francisco
  • AMPHIBIAN Project ID:720853
[EN] We analyze the contribution of the inhomogeneous magnetic field induced by an electrical current to the spin Hall effect in metals. The Zeeman coupling between the field and the electron spin leads to a spin dependent force, and to spin accumulation at the edges. We compare the effect of this relativistic correction to the electron dynamics to the features induced by the spin-orbit interaction. The effect of current induced magnetic fields on the spin Hall effect can be comparable to the extrinsic contribution from the spin-orbit interaction, although it does not require the presence of heavy elements with a strong spin-orbit interaction., This work was supported by the Spanish Ministry of Innovation, Science and Technology and Spanish Ministry of Economy and Competitiveness through Research Projects MAT2015-67557-C2-1-P, MAT2017-86450-C4-1-R, S2013/MIT-2850 NANOFRONTMAG and by the European Commission AMPHIBIAN (H2020-NMBP-2016-720853)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Efficient Antimicrobial Ceramics Based on Electrically Charged Interfaces

  • Jiménez Reinosa, Julián
  • Muñoz Rojo, Miguel
  • Campo, Ángel Adolfo del
  • Martín-González, Marisol
  • Fernández Lozano, José Francisco
The increasing threat of multidrug-resistant microorganisms is a cause of worldwide concern. This motivates a necessity to discover new antimicrobial agents or new mechanisms for microorganism eradication, different from those currently used. Here, we report an effective antibacterial ceramic glaze that combines different bactericidal mechanisms. Specifically, the used methodology of the glaze results in glass-free edge crystallizations of feldspar structures at the ceramic surface. A combination of Rutherford backscattering spectroscopy, scanning electron microscopy, and Raman microscopy is used to determine the chemical elements and crystallizations at the ceramic surface. Moreover, Kelvin probe force microscopy demonstrates that the presence of glass-free edges in feldspar needle crystals (semiconductor phase) on a glass matrix (insulator phase) promotes the formation of semiconductor-insulator interface barriers. These barriers act as reservoirs of electric charges of ∼1.5 V, producing a discharge exceeding the microorganism membrane breakdown value (up to 0.5 V). Furthermore, the surface crystallizations account for the formation of a microroughness that limits biofilm formation. Both factors result in high antibacterial activity in the range of R > 4 for Escherichia coli and Staphylococcus aureus. This approach opens new possibilities to attain bactericidal surfaces and to understand the role of physical interaction as a main antimicrobial mechanism., The authors acknowledege the financial support by the projects MAT2017-86450-C4-1-R and MAT2017-86450-C4-3-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced wear resistance of engineered glass-ceramic by nanostructured self-lubrication

  • Fuertes de la Llave, Víctor
  • Cabrera Ibáñez, María José
  • Seores Goterris, Jaime
  • Muñoz, D.
  • Fernández Lozano, José Francisco
  • Enríquez Pérez, Esther
[EN] A new kind of micro-nanostructured glass-ceramic based on albite and anorthite crystallizations,N90%, has beenobtained following a fast sintering processing route. Flexural strength values up to 111 MPa and microhardnessvalues of 9.5 GPa are measured, supposing an improvement of ~60% regarding current glazes for ceramicfloortiles for high transit areas. The hierarchical micro-nanostructuration of these glass-ceramics favour crack deflec-tion, which implies a reduction of brittleness in these materials and a consequent increase of fracture toughnessof ~40% regarding a standard glass-ceramic. Tribological properties are also evaluated, showing a decrease in thefriction coefficient (μ) of ~36% and a surprising reduction of the wear rate (WR) larger than one magnitude order,in both micro-nanostructured glass-ceramics, concerning a standard one. Worn tracks analysed by Multi-ModeOptical Profilometry and FE-SEM measurements revealed that nanocrystals present in the microstructure workas solid lubricants, favouring body sliding over their surface and noticeably reducingμ,WRand the surface dam-age suffered. Wear mechanism undergone by both glass-ceramics is unlike other glass-ceramics, similar to apolishing process, without any apparent material spalling. All of thesefindings make the micro-nanostructuredmaterials very promising candidates to be used in high-performance self-lubricating applications., The authors express their thanks to the MINECO (Spain) project MAT2017-86450-C4-1-R, and projects CDTI (IDI-20130894 and IDI-20161120) for their financial support. Dra. E. Enriquez is also indebtedto MINECO for a“Torres Quevedo” contract (ref: PTQ- 14-07289), whichis co-financed with European Social Funds. The authors also thank J.Llorente and D. Soriano for their contribution to test of tribological prop-erties and indentation tests, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature Assessment Of Microwave-Enhanced Heating Processes

  • García-Baños, Beatriz
  • Jiménez Reinosa, Julián
  • Peñaranda Foix, Felipe Laureano
  • Fernández Lozano, José Francisco
  • Catalá-Civera, José M.
[EN] In this study, real-time and in-situ permittivity measurements under intense microwave electromagnetic fields are proposed as a powerful technique for the study of microwave-enhanced thermal processes in materials. In order to draw reliable conclusions about the temperatures at which transformations occur, we address how to accurately measure the bulk temperature of the samples under microwave irradiation. A new temperature calibration method merging data from four independent techniques is developed to obtain the bulk temperature as a function of the surface temperature in thermal processes under microwave conditions. Additionally, other analysis techniques such as Differential Thermal Analysis (DTA) or Raman spectroscopy are correlated to dielectric permittivity measurements and the temperatures of thermal transitions observed using each technique are compared. Our findings reveal that the combination of all these procedures could help prove the existence of specific non-thermal microwave effects in a scientifically meaningful way., The authors wish to thank the project MAT2017-86450-C4-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Materiales vitrocerámicos funcionales basados en feldespatos jerárquicamente micro-nanoestructurados

  • Fuertes de la Llave, Víctor
[EN] The Spanish ceramic industry is one of the main world powers, positioning itself as a leader in terms of technological development, design and product quality. Traditionally, the main objective of the sector was to reduce costs, as well as the environmental impact. However, due to the great competition existing in this sector, the need arises to achieve a differentiation in the products. This can be achieved by the introduction of new functionalities, compared to the traditional demands of resistance and durability. 1,2The great boom of nanoscience in recent years has allowed the creation of new materials with improved properties. Traditionally, nanoparticles have been introduced into ceramic glazes for decorative purposes. However, this research line has hardly been followed, mainly due to its high price, the difficulty of handling, the toxicity associated with its small size and the tendency to form agglomerates due to the high reactivity, limiting its use at an industrial level. In situ formation of nanostructured materials could be a good alternative, since it would avoid the aforementioned difficulties, simultaneously providing the ceramic material with improvements in its properties, as well as exclusive functionalities. However, this work methodology has hardly been implemented in the ceramic sector, despite being an innovative and promising alternative..., [ES] La industria cerámica española es una de las principales potencias a nivel mundial, posicionándose como líder en cuanto a desarrollo tecnológico, diseño y calidad de los productos. Tradicionalmente, el principal objetivo del sector era tanto reducir costes, como el impacto medioambiental. Sin embargo, debido a la gran competencia existente en dicho sector, surge la necesidad de conseguir una diferenciación en los productos. Esto se puede lograr gracias a la introducción de nuevas funcionalidades, frente a las tradicionales exigencias de resistencia y durabilidad.1,2El gran auge de la nanociencia en los últimos años ha permitido la creación de nuevos materiales con propiedades mejoradas. Tradicionalmente, las nanopartículas han sido introducidas en esmaltes cerámicos con fines decorativos. Sin embargo, apenas se ha seguido esta línea de investigación debido, fundamentalmente, a su elevado precio, la dificultad de manipulación, la toxicidad asociada a su pequeño tamaño y la tendencia a formar aglomerados debido a la alta reactividad, limitando su uso a nivel industrial. La formación in situ de materiales nanoestructurados podría ser una buena alternativa, ya que evitaría las dificultades anteriormente mencionadas, dotando simultáneamente al material cerámico de mejoras en sus propiedades, así como de funcionalidades exclusivas. Sin embargo, esta metodología de trabajo apenas ha sido implementada en el sector cerámico, a pesar de ser una alternativa innovadora y prometedora..., La realización de este trabajo de Tesis doctoral ha sido posible gracias a la financiación del Ministerio de Economía y Competitividad (MINECO), por los proyectos de investigación MAT2017-86450-C4-1-R y CDTI (IDI-20130894 y IDI-20161120), Study of the crystallization in fast sintered Na-rich plagioclase glass-ceramic, Ceram. Int. (2019) 0–1. doi:10.1016/j.ceramint.2019.01.219, Structural insights of hierarchically engineered feldspars by confocal Raman microscopy, J. Raman Spectrosc. (2019)1–14. doi:10.1002/jrs.5556., New strategy to mitigate urban heat island effect : Energy saving by combining high albedo and low thermal diffusivity in glass ceramic materials, Sol. Energy. 149 (2017) 114–124. doi:10.1016/j.solener.2017.04.011., Hierarchical micro-nanostructured albite-based glass-ceramic for high dielectric strength insulators, J. Eur.Ceram. Soc. (2018). doi:10.1016/j.jeurceramsoc.2018.02.009., Enhanced wear resistance of engineered glass-ceramic by nanostructured self-lubrication." Materials & Design 168 (2019). doi:10.1016/j.matdes.2019.107623 http://hdl.handle.net/10261/203283, Absence of surface flaking in hierarchical glass-ceramic coating: High impact resistant ceramic tiles. Journal of the European Ceramic Society 39.14 (2019). doi:10.1016/j.jeurceramsoc.2019.05.047, Microstructural study of dielectric breakdown in glass-ceramics insulators. Journal of the European Ceramic Society 39.2-3 (2019). doi: 10.1016/j.jeurceramsoc.2018.08.044, Enhanced luminescence in rare-earth-free fast-sintering glass-ceramic. Optica 6.5 (2019). doi:10.1364/OPTICA.6.000668, Tunable UV/blue luminescence in rare-earth free glass-ceramic phosphor. Journal of the European Ceramic Society 39.10 (2019). doi: 10.1016/j.jeurceramsoc.2019.04.027, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced luminescence in rare-earth-free fast-sintering glass-ceramic

  • Fuertes de la Llave, Víctor
  • Fernández Lozano, José Francisco
  • Enríquez Pérez, Esther
[EN] One of the major challenges pursued in the luminescent materials community is to develop rare-earth-free phosphors in order to reduce the use of rare-earth elements, because of the lack of their availability and the environmental problems derived from their mining and processing. In this work, a rare-earth-free glass-ceramic-based phosphor with high photoluminescence has been designed. This novel phosphor rich in Na-rich plagioclase feldspar crystallizations presents high crystallinity, ~94%, and a dual micro-nanostructure provided by a fast-sintering processing route. Structural disorder in Si-Al distribution favors formation of luminescent centers in the glass-ceramic material, which results in an enhancement of both the UV-blue and the red luminescence regarding natural feldspars, 1 order of magnitude and 6 times, respectively. A microstructural and structural study by means of x-ray diffraction, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, cathodoluminescence, and nuclear magnetic resonance evidence the important role of composition in the alteration of Si-Al ordering schemes. A strong correlation between Si-Al disorder and the presence of active luminescent centers is corroborated. Our research shows a sustainable, cost-effective, innovative, and scalable material that may be considered as an alternative to rare-earth phosphors for applications such as security markers or light-emitting glasses. This novel family of rare-earth-free glass-ceramics opens a new gate through structural tailoring to enhance and tune the intrinsic luminescent emissions displayed for relevant future optical applications., Ministerio de Economía y Competitividad (MINECO) (MAT2017-86450-C4-1-R, PTQ- 14-07289).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Performance and Stability of Wet-Milled CoAl2O4, Ni/CoAl2O4, and Pt,Ni/CoAl2O4 for Soot Combustion

  • Álvarez-Docio, Carmen M.
  • Portela, Raquel
  • Jiménez Reinosa, Julián
  • Rubio Marcos, Fernando
  • Pascual, Laura
  • Fernández Lozano, José Francisco
[EN] Low-energy wet milling was employed to activate commercial CoAl2O4 spinel and disperse mono- and multimetallic nanoparticles on its surface. This method yielded efficient Pt,Ni catalysts for soot oxidation in simulated diesel exhaust conditions. The characterization and activity results indicated that although Ni/CoAl2O4 was highly active, the presence of Pt was required to obtain a stable Ni(0.25 wt. %),Pt(0.75 wt. %)/CoAl2O4 catalyst under the operating conditions of diesel particulate filters, and that hot spots formation must be controlled to avoid the deactivation of the cobalt aluminate. Our work provides important insight for new design strategies to develop high-efficiency low-cost catalysts. Platinum-containing multimetallic nanostructures could efficiently reduce the amount of the costly, but to date non-replaceable, Pt noble metal for a large number of industrially important catalytic processes, This research was funded by CSIC, NANOMIND project number CSIC201560E068, and the Spanish Government, grant number MAT2017-86450-C4-1-R projects. C.M.A.-D. received financial support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for an FPI grant BES-2014-069779, which is co-financed with FEDER funds. F.R.-M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F.R.-M. also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnon-mediated magnetoresistance in layered manganites

  • Hernando Grande, Antonio
  • Cortés Gil, Raquel
  • González Merchante, Daniel
  • Hernando González, María
  • Alonso, José M.
  • García García-Tuñón, Miguel Ángel
  • Martínez, J. L.
  • Ruiz Gonález, María Luisa
  • González Calbet, José María
[EN] We describe here a type of magnetoresistance that takes place in naturally layered and outstanding ordered single phase manganites that may be mediated by magnon excitation. In particular, we show the effect for the Ruddlesden-Popper compound, LaSr2Mn2O7 synthesized by ceramic method. This material exhibits, besides the conventional colossal magnetoresistance, another type of magnetoresistance at low temperature, associated with breaking of the A-type antiferromagnetic coupling of Mn-containing planes. Excitation of magnons or application of a magnetic field breaks this antiparallel alignment so that some electrons, initially confined on the planes, become itinerant along the interplain directions through a double exchange mechanism, giving rise to resistance variations of the order of~60% for polycrystalline samples. The effect described heremight be present in other types of manganites exhibiting a natural layered structure, opening up the possibility of developing magnetoresistive devices based on antiferromagnetic oxide materials without requiring artificial multilayered structures., This work was supported by the Spanish Ministry of Innovation, Science, and Technology and the Spanish Ministry of Economy and Competitiveness through Research Projects No. CSD2009-00013, No. TSI-020100-2011-280, No. MAT2011-23068, No. MAT2012-37109-C02-01, No. MAT2014-54372-R, and No. MAT2017-86450-C04-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal defects and optical emissions of pulse electrodeposited ZnO

  • Manzano, Cristina V.
  • Serrano Rubio, Aída
  • Muñoz-Noval, Alvaro
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
ZnO has been widely studied in the last decades as an n-type semiconductor due to its wide application range, for example, in optoelectronics, solar cells, light-emitting diodes, thermoelectrics, amongst others. The material efficiency for certain applications is highly dependent on the presenting film morphology. Electrodeposition is well-known as a technique with precise control over the structural and morphological properties of the obtained materials. When the structural and morphological properties are tuned, it is possible to find a wide variety of defects in the ZnO structure. In this study, ZnO films were grown using pulsed electrodeposition with variation of the reduction potential. The crystal order, structural defects and optical emissions of the films have been analyzed by X-Ray Diffraction (XRD), X-ray Absorption Near-Edge Structure (XANES), Extended X-ray Absorption Fine Structure (EXAFS) and Photoluminescence (PL). ZnO film grown at less negative reduction potential presents a stronger texture along [0001] by XRD, higher crystalline order, and more zinc vacancies by XANES and EXAFS. The films obtained at less negative potential present less OH trapped in the ZnO structure and a relatively higher level of defects O, O, O and O than those grown at higher reduction potentials by PL. This will be related to the fact that at less negative potentials there is less concentration of OH at the film surface than at more negative potentials. The combination of X-ray absorption spectroscopy and photoluminescence reveals the complicated nature of the atomic defect in electrodeposited ZnO films. Allowing to evidence the preferential presence of atomic defect as a function of the reduction potential. In this work, we have also compared those defects with reference compounds such as a Zn foil and ZnO polycrystalline powder., The authors would like to acknowledge financial support from MAT2017-86450-C4-1-R, MAT2017-86450-C4-3-R, and RTI2018-095303-A-C52. C.V.M acknowledges financial support from Juan de la Cierva Incorporación grants IJCI-2017-31350. A.S. and A.M.N. acknowledge the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract No. 2017-t2/IND5395 and 2018-T1/IND-10360, respectively. We acknowledge The European Synchrotron (ESRF), MICIU, and CSIC for provision of synchrotron radiation facilities in using the BM25-SpLine beamline. We also thank the BM25-SpLine staff for the technical support beyond their duties. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pt mechanical dispersion on non-porous alumina for soot oxidation

  • Álvarez-Docio, Carmen M.
  • Portela, Raquel
  • Jiménez Reinosa, Julián
  • Rubio Marcos, Fernando
  • Fernández Lozano, José Francisco
A sustainable mechanical method to disperse Pt particles on the surface of non-porous α-AlO microparticles is reported. The hierarchical Pt/α-AlO catalyst possesses a metal specific surface area one order of magnitude lower than the state-of-the-art γ-AlO – supported Pt catalysts of similar metal composition and high alumina specific surface area. The relatively large size of the Pt particles seems to favor the catalytic soot oxidation in spite of their relatively low dispersion. As a result, the temperature of half conversion (T = 440 °C) is lower when compared with conventional Pt/γ-AlO prepared by the wet impregnation chemical synthesis route., The authors thank the funding bodies of the projects NANOMIND CSIC201560E068 and MAT2017-86450-C4-1-R. C.M. Alvarez-Docio is also thankful for a FPI grant BES-2014-069779, which is co-financed by FEDER funds. F. Rubio-Marcos is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F.R-M also acknowledges support from Leonardo Grant for Researchers and Cultural Creators (2018), BBVA Foundation
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FeCo nanowire−strontium ferrite powder composites for permanent magnets with high-energy products

  • Guzmán-Mínguez, J. C.
  • Ruiz-Gómez, Sandra
  • Vicente-Arche, L. M.
  • Granados-Miralles, Cecilia
  • Fernández-González, Claudia
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Erohkin, S.
  • Berkov, Dmitry
  • Mishra, D.
  • de Julián Fernández, C.
  • Fernández Lozano, José Francisco
  • Pérez, L.
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameters between 30 and 100 nm and length of at least 2 μm are fabricated by electrodeposition. The oriented as-synthesized nanowires show remanence ratios above 0.76 and coercivities above 199 kA/m and resist core oxidation up to 300 °C due to the existence of a >8 nm thin oxide passivating shell. In the second step, a composite powder is fabricated by mixing the nanowires with hexaferrite particles. After the optimal nanowire diameter and composite composition are selected, a bonded magnet is produced. The resulting magnet presents a 20% increase in remanence and an enhancement of the energy product of 48% with respect to a pure hexaferrite (strontium ferrite) magnet. These results put nanowire−ferrite composites at the forefront as candidate materials for alternative magnets for substitution of rare earths in applications that operate with moderate magnet performance., We would like to thank Dr. Vić tor Fuertes for his advice on the processing of the bonded magnets. This work is supported by the Spanish Ministerio de Economía y Competitividad y Ministerio de Ciencia e Innovación (Project Nos. MAT2017- 86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110- C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-A-C52, and FIS2017-82415-R) and by the European Commission through Project H2020 (No. 720853; AMPHIBIAN). C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I). A.Q. acknowledges financial support from MICINN through the “Ramón y Cajal” Program (RYC-2017-23320). The work also is funded by the Regional Government of Madrid (Project S2018/ NMT-4321; NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recognizing and understanding silica-polymorph microcrystals in ceramic glazes

  • Febo, Roberta Di
  • Casas, Lluís
  • Campo, Ángel Adolfo del
  • Rius, Jordi
  • Vallcorba, Oriol
  • Melgarejo, Joan Carles
  • Capelli, Claudio
Different methods have been historically used to identify silica-polymorph microcrystals in various contexts. However, in the existing literature there is a substantial lack of correlation between local probe analytical data and the corresponding images showing crystal morphologies. Here we demonstrate that such correlation is attainable through an approach based on the characterization of samples prepared as polished thin sections combining optical microscope images with local probe techniques (synchrotron through-the-substrate X-ray microdiffraction and confocal micro-Raman). We report the characterization of different morphologies of silica microcrystals embedded in lead glazes from glazed pottery produced in Jouques (France) in the mid-19th century. Among the eight identified morphologies, are worthy of note cristobalite-coated quartz, paramorphic quartz after cristobalite, cristobalite-tridymite intergrowths or cristobalite twinned crystals. Elusive tridymite has been identified and mapped using μ-Raman and locates predominantly at the borders of some morphologies suggesting a growth front of tridymite that turns to cristobalite., Financial support from projects CGL2013-42167-P, MAT2017-86450-C4-1-R and RTI2018-098537-B-C21 (Spanish government). This study adheres to the objectives of the 2017SGR00970 group (Generalitat de Catalunya)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ceramic Injection Moulding of engineered glass-ceramics: Boosting the rare-earth free photoluminescence

  • Enríquez Pérez, Esther
  • Berges, C.
  • Fuertes de la Llave, Víctor
  • Gallego, A.
  • Naranjo, J.A.
  • Herranz, G.;
  • Fernández Lozano, José Francisco
The obtaining of dense ceramic pieces with versatility of size and shape is a much sought-after objective. Powder Injection Moulding (PIM) and Ceramic Injection Moulding (CIM), in particular, is a well-known technology that allows preparing this kind of complex parts with great variety of materials and at large production volume in a cost-efficient way. Usually, this process provides structural materials for mechanical and conforming purposes, but very few works have focused on manufacture functional porcelains. In this work, CIM method is used to process rare-earth free glass-ceramics with photoluminescent properties. The CIM parameters are optimized to obtain dense ceramic parts based on Na-rich plagioclase previously designed. The CIM processed samples show a higher structural disorder as studied by XRD and Raman spectroscopy and variations of the micro-nanostructure, in comparison with conventional ceramic processed samples. Photoluminescent emission studies show an increase of almost one order of magnitude on the UV-blue emission, due to the rise of the structural defect population generated by the CIM process. The CIM process, thus, provides results that boosted the use of rare-earth free materials for luminescence application having complex shapes., The authors express their thanks to the MINECO project MAT2017-86450-C4-1-R, and project CDTI of CTV for theirfinancial support. Inaddition, authors thanks to Vidres S. A. for the raw materials provided.The authors gratefully acknowledge thefinancial support by JCCM (Junta de Castilla La Mancha) in the Regional Funding Programme for Scientific Research (SBPLY/17/180501/000550).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the coercivity of SrFe12O19 nanocrystalline powders obtained using the citrate combustion synthesis method

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Granados-Miralles, Cecilia
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Strontium hexaferrite nanocrystalline powders were synthesized using a citrate combustion method and subsequently subjected to post-synthesis processing with the aim of tuning the micro-nanostructure to improve the magnetic properties. Firstly, the synthesis thermal treatments were optimized in order to minimize the formation of secondary phases, mainly hematite. Secondly, the as-synthesized powders were conditioned by a two-step process: ball milling in wet medium (ethanol) and high-speed mixing. The final processed powders exhibited a saturation magnetization of 74 emu g-1 and a coercivity of 6450 Oe. Following a low-temperature combustion synthesis, the coercivity is one of the largest values reported for strontium ferrites. The combination of the two-step conditioning procedure results in a useful methodology to obtain SrFe12O19 nanocrystalline powders with competitive properties. The morphological, structural and magnetic properties of the processed material make it a promising candidate for hard-soft ferrite-based composite magnets, where large coercivity values are highly desirable., This work is supported by the Spanish Ministerio de Ciencia e Innovación through Project Nos. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and through the Ramón y Cajal Contract RYC-2017-23320; and by the European Commission through Project H2020 No. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C G-M acknowledges financial support from MICINN through the ‘Juan de la Cierva’ Program (FJC2018-035532-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncorrelated magnetic domains in decoupled SrFe12O19/Co hard/soft bilayers

  • Delgado Soria, Guiomar
  • Granados-Miralles, Cecilia
  • Mandziak, Anna
  • Jenus, P.
  • Saura-Múzquiz, Matilde
  • Christensen, Mogens
  • Foerster, Michael
  • Aballe, Lucía
  • Fernández Lozano, José Francisco
  • de la Figuera, Juan
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
8 pags., 5 figs., Composites of magnetically hard and soft phases are present in multiple and diverse applications, ranging from bulk permanent magnets in motors and generators to state-of-the-art recording media devices. The nature of the magnetic coupling between the hard and soft phases is of great technological relevance, as the macroscopic properties of the functional composite material ultimately depend on the atomic-scale interactions between phases. In this work, the hard/soft bilayer system SrFeO/Co has been studied based on photoemission electron microscopy combined with x-ray absorption and magnetic circular dichroism. Our experiments show that the magnetization of the hard magnetic oxide has a direction perpendicular to the layer plane, whereas the magnetization of the soft metallic overlayer remains in-plane. As a consequence, the magnetic domain patterns observed for the hard and soft phases are very different and completely uncorrelated to one another, indicating that no soft spins align with the hard phase by pure magnetodipolar arguments. The results are understood as the consequence of an absence of exchange-coupling between phases, in a scenario in which the shape anisotropy of the soft layer overcomes the Zeeman energy of the perpendicular magnetic field generated by the hard ferrite. Micromagnetic simulations of our system predict that low degrees of exchange-coupling effectively prevent substantial softening of the composite and lead to the alignment of soft and hard magnetic moments. A strategy thus emerges for the development of future hard-soft magnets, based on minimizing the degree of exchange-coupling while avoiding complete uncoupling., This work is supported by the Spanish Ministerio de Economía y Competitividad (MINECO) through Projects no. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and by the European Comission through Project H2020 no. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C.G.-M. acknowledges financial support from Spanish Ministerio de Ciencia e Innovación (MICINN) through the 'Juan de la Cierva' Program (FJC2018-035532-I). Spanish Ministerio de Economía y Competitividad (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasensitive NO2 gas sensor with insignificant NH3-interference based on a few-layered mesoporous graphene

  • Matatagui, Daniel
  • López-Sánchez, Jesús
  • Peña, Álvaro
  • Serrano Rubio, Aída
  • Del Campo, Adolfo
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
  • Navarro, Elena
  • Marín, Pilar
  • Horrillo, Carmen
9 páginas, 6 figuras color., Few-layered mesoporous graphene (FLMG) is employed as a sensing material to develop an innovative and high-sensitivity room temperature NO sensor through a simple manufacturing process. For this purpose, sensing material is optimized at 100 min by a high-energy milling process where natural graphite is used as a precursor: it is an inexpensive, sustainable and suitable active material. The large number of defects created and the enhanced degree of mesoporosity produced during the milling process determine the physical principles of operation of the designed device. NO gas sensing tests reveal an improved and selective performance with a change in resistance of ∼16 % at 0.5 ppm under ultraviolet photo-activation, establishing a detection limit around ∼25 ppb. Interestingly, the response of the developed sensor to humidity is independent in the measured range (0–33 % relative humidity at 25 °C) and the dependency to the presence of NH is rather poor as well (∼1.5 % at 50 ppm)., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RTI2018-095856-B-C22 (AEI/ FEDER), RTI2018-095856-B-C21 (AEI/FEDER), RTI2018-095303-AC52, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015- 67557-C2-1-P, and PIE 2010-6OE-013. The Comunidad de Madrid by S2018/NMT-4321. D. M. acknowledges the financial support from the Fundacion ´ General CSIC via Programa ComFuturo. A. S. acknowledges the financial support from the Comunidad de Madrid for an “Atraccion ´ de Talento Investigador” contract (no. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absence of surface flaking in hierarchical glass-ceramic coating: High impact resistant ceramic tiles

  • Enríquez Pérez, Esther
  • Fuertes de la Llave, Víctor
  • Cabrera Ibáñez, María José
  • Seores Goterris, Jaime
  • Muñoz, D.
  • Fernández Lozano, José Francisco
[EN] The impact resistance method is a useful procedure to determine the tile resistance. While other works are focused on modifying the tile support to improve the impact resistance, in this work, a new glass-ceramic material was developed to used it as glaze coating in order to relax impact tensions. This material possesses a hierarchical nano-microstructure consisted of microcrystal surrounded by nanostructured regions having low glassy phase, which is considered responsible for tension relaxations. The resilience coefficient measured in conventional and glass-ceramic glazes presents little differences (0.85–0.88). However, impact damages on the surface is totally inhibited for glass-ceramic coating while the conventional one suffers great flaking. These damages were analyzed by Optical profilometry and FESEM to compare the impact resistance and to correlate it with its microstructure. The results confirm that the micro-nanostructured coating paves the way to improve impact resistance in ceramic materials where surface damage is a critical parameter., MINECO (Spain) project MAT2017-86450-C4-1-R, and project CDTI of CTV for theirfinancial support. Dra. E. Enriquez is also indebted to MINECO (Spain) for a“Torres Quevedo’’contract (ref: PTQ-14-07289), which is co-financedwith European Social Funds
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accelerated disintegration of compostable Ecovio polymer by using ZnO particles as filler

  • Campo, Ángel Adolfo del
  • Lucas-Gil, Eva de
  • Rubio Marcos, Fernando
  • Arrieta, Marina P.
  • Fernández-García, Marta
  • Fernández Lozano, José Francisco
  • Muñoz-Bonilla, Alexandra
[EN] ZnO compounds exert a catalytic effect on the degradation of polyesters and could affect the biodegradability of such polymers. Herein, composites of 2 wt% of ZnO particles and biodegradable commercial Ecovio polymer, a blend of poly(lactic acid) (PLA) and a copolyester, are prepared by melt extrusion process to further study the effect of the incorporation of ZnO particles on the biodegradability of this polyester under composting conditions. Different nano- and micro-sized ZnO particles are employed to investigate the effect of the size, morphology, and surface charge of ZnO on the physicochemical properties of the polymeric composite and nanocomposite by differential scanning calorimetry (DSC) and thermogravimetric analyses (TGA). The influence of such compounds on the compost disintegradability is further investigated by different techniques including, gel permeation chromatography (GPC), confocal Raman microscopy and energy dispersive x-ray spectrometer (EDX). The results demonstrate that the ZnO particles significantly accelerate the disintegration process of the Ecovio polymeric blend under a composting environment., This research was funded by the MICINN under the projects PID2019–10460 0RB-I0 0 and MAT2017–86450-C4–1-R , the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068 , the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). F.R-M is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015–18626), which is co-financed by the European Social Fund . F.R-M also acknowledges support from a 2018 Leonardo Grant for Re- searchers and Cultural Creators (BBVA Foundation).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards more sustainable building based on modified Portland cements through partial substitution by engineered feldspars

  • Enríquez Pérez, Esther
  • Torres-Carrasco, M.
  • Cabrera Ibáñez, María José
  • Muñoz, D.
  • Fernández Lozano, José Francisco
[EN] Global warming is one of the main problems that facing modern civilization. As buildings consume 40% of total energy, the heating in the cities is a primary concern. Therefore, it seeks to improve sustainable construction materials with better thermal and reflective properties, reducing consumption and heat islands. In this work, mineral and engineered feldspars have been used as partial substitution of white cement, that is widely used in the cladding of façades mainly due to its high whiteness, to improve composites’ reflectance and reducing their thermal conductivity. Both feldspars show pozzolanic effect and new composites have superior whiteness and reflectance (greater than12%). Moreover, the engineered feldspar avoids the alkali-silica reaction (ASR) effect in spite of its alkaline content. A reduction of heat of greater than 2 °C after 6 h of solar irradiance is demonstrated for engineered feldspar composite resulting in a good alternative for their implementation as exterior insulation and finish systems., MAT-2017-86450-C4-1-R, CSIC NANOMIND project CSIC2015-60E068 andprojects CDTI (IDI-20130894 and IDI-20161120) for their financialsupport. Dra. E. Enriquez is also indebted to MINECO for a ‘‘Torres Quevedo’’ contract (ref: PTQ-14-07289), which is co-financed with European Social Funds
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement of thermal efficiency in cement mortars by using synthetic feldspars

  • Torres-Carrasco, M.
  • Enríquez Pérez, Esther
  • Terrón-Menoyo, L.
  • Cabrera Ibáñez, María José
  • Muñoz, D.
  • Fernández Lozano, José Francisco
[EN] The use of white cements as a building material is widely employed due to its high whiteness and reflectance. However, building materials should adopt better thermal insulation characteristics to contribute for a significant urban heat-islands mitigation. In this work, synthetic feldspar has been evaluated as partial and total replacement of sand in white cement mortars. Thermal, mechanical, and optical properties of these new mortars are characterized by thermal conductivity, compression resistance test and reflectance-colorimetry, respectively. The replacement of sand by synthetic feldspar allows to obtain white mortars having ≈18% improvement in solar reflectance. Experiment under solar irradiance of mortars having synthetic feldspars reduce the surface heating of the mortar in 25% and the heating transmission to the rear of the mortar in >55%. Moreover, the high crystallinity of the synthetic feldspar reduces the mortar expansion due alkali-silica reactions (ASR). Improvement in reflectance and thermal conductivity resistance of white cement mortar having synthetic feldspar opens a wide range of building material applications., Project MAT-2017-86450-C4-1-R, CSIC NANOMIND project CSIC2015-60E068 andprojects CDTI (IDI-20130894 and IDI-20161120) for their financialsupport. Dra. E. Enríquez is indebted to MINECO for a ‘‘Torres Quevedo’’ contract (ref: PTQ-14-07289), which is co-financed withEuropean Social Funds. Dr. M. Torres-Carrasco is also indebted toMINECO for a postdoctoral fellowship ‘‘Juan de la Cierva-Formación” (ref: FJCI-2016-28488).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast particle size reduction of Fe73.9Si15.5Cu1Nb3B6.6 by high-energy milling: Nb2O5 as a marker of permeability enhancement and magnetic hardening

  • López-Sánchez, Jesús
  • Navarro, Elena
  • Serrano Rubio, Aída
  • Granados-Miralles, Cecilia
  • Campo, Ángel Adolfo del
  • Quesada, Adrián
  • Marín, Pilar
  • AMPHIBIAN Project ID:720853
[EN] This work is conceived to provide a reproducible and fast method to obtain optimal particle sizes for competitive ultrasoft magnetic applications based on FeSiCuNbB-nanostructured particles. In this scenario, partial nanocrystallization of the α-FeSi compound is promoted by annealing and subsequent high-energy ball milling processes. The milling is performed in this material, for the first time, by a combination of mixer, vibratory, and planetary ball milling motions. Under these conditions, structural and magnetic properties are tuned as a function of milling time with reduced particle size distributions and maintaining the ultrasoft magnetic character. In addition, drastic electronic and structural changes are observed after a few minutes of milling where saturation magnetization and initial permeability are strongly influenced by the percentage of the α-FeSi nanocrystallites formed. Above 30 min of ball milling, the formation of a low concentration of NbO clusters is detected by confocal Raman microscopy. This identification is essential because the rejection of Nb from the amorphous matrix rich in Fe−Nb−B atoms acts as a marker of the seed mechanism that causes the deterioration of the softness character of these nanostructures. Therefore, on the one hand, this work introduces a successful procedure by combined milling processes to optimize the saturation magnetization and permeability with submicron particle sizes and, on the other hand, the detection of NbO clusters is implemented as an influential marker on the magnetic properties of these soft nanostructured particles., The authors acknowledge the Spanish Ministry of Industry, Economy, and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, the Comunidad de Madrid by S2013/MIT-2850 NANOFRONTMAG, and the European Commission under H2020 frame by AMPHIBIAN project ID: 720853. The authors are also grateful for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant no. PIE 2010-6OE-013. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395). C.G.-M. and A.Q. acknowledges the financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I) and through the Ramón y Cajal Contract RYC-2017-23320., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement of the magnetic properties of SrFe12O19 ceramics by tailored sintering with SiO2 addition

  • Guzmán-Mínguez, J. C.
  • Vicente-Arche, L. M.
  • Granados-Miralles, Cecilia
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
[EN] In order to obtain competitive strontium ferrite sintered magnets, SiO2 and CaO are added to avoid exaggerated grain growth. Besides favoring proper densification, these additives prevent the collapse of coercivity associated to grain growth. However, these additives may lead to slight decreases in density and the formation of paramagnetic α-Fe2O3 that hampers magnetization. Here, with the motivation of simplifying the production process, we present a study to maximize the magnetic performance of strontium ferrite ceramics using silica as the sole additive. A microscopic study offers insights into the grain growth mechanism activated by Silica. As a result, a compromise between relative density, coercivity and saturation magnetization is attained. It is found that sintering for 4 h up to 1200 °C with a SiO2 content of 1 wt% leads to the best compromise between coercivity, magnetization and density values. Competitive densities are reported in the absence of CaO, the usual co-additive. In addition, Confocal Raman Microscopy is employed for the first time to characterize the decomposition of strontium ferrite onto α-Fe2O3-Fe2O3., This work is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades through Project no. MAT2017-86450-C4-1-R, RTI2018-095303-A-C52 and through the Ramón y Cajal Contract RYC-2017-23320 and Juan de la Cierva Program FJC2018-035532-I; and by the European Commission through the H2020 Project no. 720853 (AMPHIBIAN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiphase materials based on the Fe73.9Si15.5Cu1Nb3B6.6 alloy obtained by dry and wet high-energy ball milling processes

  • López-Sánchez, Jesús
  • Navarro, Elena
  • Rodríguez-Granado, Freddy
  • Serrano Rubio, Aída
  • Marín, Pilar
  • AMPHIBIAN Project ID:720853
[EN] Novel hybrid materials based on the soft nanocrystalline FeSiCuNbB alloy are designed in this work with the purpose of reducing its particle size and developing different compositional, structural, and magnetic properties depending on the high-energy ball milling time and route employed. Innovative processes combining mixer, vibratory and planetary motions at the same time are carried out under a dry and a wet route, obtaining reduced sub-micron particle size distributions after 2 h of milling. The established approach takes advantage of the nature of amorphous materials to promote the formation of different hybrid compounds and it is supported by the high virulence of the milling process performed at 2000 rpm. On the one hand, the results obtained by the dry route show a structural and magnetic evolution dominated by the presence of ferromagnetic α-FeSi nanocrystals. On the other hand, the wet approach that is supported by glycerol evidences the destruction of the α-FeSi with the milling time in favor of the non-magnetic β-FeSi phase, obtaining a new functionality for the FeSiCuNbB alloy. Their properties as soft magnetic alloys are evaluated and compared depending on the followed route, opening up a new physicochemical method in the development of multiphase compounds with potential applications. With this work, a controlled formation of different hybrid compounds is achieved, revealing an effective mechanism to introduce functional materials with different properties embedded in an amorphous ferromagnetic matrix., The authors acknowledge the Spanish Ministry of Industry, Economy and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095303-A-C52, and , the Comunidad de Madrid by S2013/MIT-2850 NANOFRONTMAG, and the European Commission under H2020 frame by AMPHIBIAN Project ID: 720853. In addition, the authors thank for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant no. PIE 2010-6OE-013. A. S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transparent high conductive Titanium oxynitride nanofilms obtained by nucleation control for sustainable optolectronics

  • Enríquez Pérez, Esther
  • Mariscal, A.
  • Serna, Rosalía
  • Fernández Lozano, José Francisco
9 pags., 6 figs., 3 tabs., Transparent conducting thin films have attracted a lot of interest in last decades because they have become essential electrodes for optoelectronics applications. Indium tin oxide (ITO) is the transparent conductor par excellence with 80% transmittance in the visible range and a resistivity of 10 Ω·cm. Unfortunately, ITO is toxic, brittle and very expensive due to the Indium scarcity in the earth's crust. For this reason, sustainable alternatives are being sought. Titanium oxynitrides are a very interesting alternative, titanium is abundant and its oxynitrides show remarkable mechanical, electrical and optical properties that can be tailored by modifying the N/O ratio. However, achieving the balance between transparency and conductivity to design a suitable electrode is a challenging milestone. In this work we prepared high quality TiON nanofilms by PLD (pulsed laser deposition) in vacuum, tuning the transparency and conducting properties by varying the deposition laser energy to control the N/O ratio. The absence of gases flux achieves defect-free films with transparency up to 50% and similar conductivity to ITO (1.8·10 S/cm). These results open a new line of research for the development of sustainable transparent conducting electrodes based on dense and planar TION films, very useful for electronic and optical devices, solar cells or photonics., The authors express their thanks for their financial support of the Spanish Research Agency (AEI, Ministry of Research and Innovation) (project MAT2017-86450-C4-1-R) and the European Regional Devel- opment Fund (ERDF) (grant RTI 2018-096498-B-I00.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Order-Disorder in the Structures of Lithium Aluminosilicate Minerals by XRD and Multinuclear NMR

  • Sánchez-Muñoz, Luis
  • Sanz, Jesús M.
  • Florian, Pierre
  • Díaz-Gómez, Virginia
  • Furio, Marta
  • Sobrados, Isabel
The crystal structures of the lithium aluminosilicate minerals of the Li2O–Al2O3–SiO2 (LAS) system (Li1−xAl1−xSi1+xO4 system for 0.0 ≤ x ≤ 1.0), and bikitaite were determined by X-ray diffraction (XRD) in literature, suggesting several possible lattice models for each of the crystallized phases, because of the intrinsic experimental difficulties of this technique. Here, we correlate powder XRD patterns with Rietveld refinement of cell parameters and magic angle sample spinning multinuclear magnetic resonance (NMR) spectra, including 29Si, 27Al, 7Li, and 6Li spectroscopy at 7.05 T, 9.4 T, and 20 T. The aim is to select appropriate lattice models from short-range order schemes in the lithium aluminosilicate phases, from natural minerals and synthetic crystals from the crystallization of amorphous gel precursors by a ceramic route and also by hydrothermal high-pressure experiments. Solid solutions were found in α-quartz and α-cristobalite up to x ≥ 0.75, and in β-eucryptite and β-spodumene for 0.0 ≤ x ≤ 1.0, when the ceramic synthesis is at work. The local structures of these intermediate members of the β-eucryptite and β-spodumene solid-solution series have 29Si NMR spectra consistent with the Loewenstein’s rule, i.e., they have short-range order but are strictly non-periodic structures. However, β-eucryptite LiAlSiO4 end-member has a short-range structure compatible with the long-range order of the P6422 symmetry, when the crystallization is produced at hydrothermal conditions. The local structure of α-spodumene LiAlSi2O6 is consistent with the C2/c model. α-eucryptite LiAlSiO4 shows a short-range structure as that suggested by the R-3 lattice model. Petalite LiAlSi4O10 has a local structure compatible with the P2/a space group. Finally, the 29Si NMR spectra of bikitaite LiAlSi2O6·H2O indicate a short-range structure well-suited with the P1 symmetry. These results are consistent with the Ostwald‘s rule of stages, forming a order-disorder sequence of increasing long-range order from the starting fully disordered solid gels, through crystalline pseudoperiodic structures in non-stoichiometric solid solution crystals that respect the Lowenstein’s rule, up to fully ordered crystals with short-range structures from NMR close to the long-range structures by XRD, as in the stoichiometric compounds found in some natural minerals., This research was funded by the Ministerio de Ciencia e Innovación PID2019-106662RB-C42, and Ministerio de Economía y Competitividad MAT2017-86450-C4-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Efectos del procesamiento cerámico y la adición de nanohilos de FeCo en la obtención de diferentes tipos de imanes permanentes de ferrita más sostenibles y mejorados.

  • Guzmán-Mínguez, J. C.
  • AMPHIBIAN Project ID:720853
La realización de este trabajo ha sido posible gracias a la financiación del Ministerio de Ciencia e Innovación de España a través de los Proyectos no. MAT2017-86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52 y FIS2017-82415-R y a través del Contrato Ramón y Cajal RYC-2017-23320; y por la Comisión Europea a través del Proyecto H2020 nº 720853 (AMPHIBIAN). El trabajo está financiado también por la Comunidad de Madrid a través del Proyecto S2018/NMT-4321 (NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth and characterization of ultrathin cobalt ferrite films on Pt(111)

  • Delgado Soria, Guiomar
  • Freindl, K.
  • Prieto, J. E.
  • Quesada, Adrián
  • de la Figuera, Juan
  • Spiridis, N.
  • Korecki, J.
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
9 pags., 8 figs., 2 tabs., CoFeO thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523 K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy, Low-Energy Electron Diffraction, Scanning Tunneling Microscopy and Conversion Electron Mössbauer Spectroscopy. The as-grown films were composed of small, nanometric grains. Annealing of the films produced an increase in the grain size and gave rise to magnetic order at room temperature, although with a fraction of the films remaining in the paramagnetic state. Annealing also induced cobalt segregation to the surface of the thicker films. The measured Mössbauer spectra at low temperature were indicative of cobalt ferrite, the both films showing very similar hyperfine patterns. Annealing in oxygen or vacuum affected the cationic distribution, which was closer to that expected for an inverse spinel in the case of annealing in an oxygen atmosphere., This work is supported by the Spanish Ministry of Science and Innovation through Projects RTI2018-095303-B-C51, RTI2018-095303- B-C53, MAT2017-86450-C4-1-R, RTI2018-095303-A-C52, through the Ramón Cajal Contract RYC-2017-23320 and RTI2018-095303-C52 (MCIU/AIE/FEDER,EU), by the Regional Government of Madrid through project S2018-NMT-4321 and by the PROM Programme - International scholarship exchange of Ph.D. students and academics; and by the European Commission through the H2020 Project no. 720853 (AMPHIBIAN), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local Structure and Protons in Non-Stoichiometric Pseudo-Cubic Pollucite Mineral by Multinuclear NMR

  • Sánchez-Muñoz, Luis
  • Santos, José Ignacio
  • Simmons, William B.
  • Florian, Pierre
The pollucite structure is considered as a candidate ceramic crystalline matrix for the ceramic immobilization and long-term storage of 135Cs and 137Cs fission products, and thus, their structural characteristics have particular importance. However, its local structure has not been fully resolved from reciprocal-space techniques and infrared spectroscopy, and important discrepancies exist in the available literature. Two birefringent and non-stoichiometric pollucite specimens from Tanco pegmatite (Cs0.83Na0.20Al1.13Si2.56O6) and from Mt. Mica pegmatite (Cs0.94Na018Al1.23Si2.78O6), with powder X-ray diffraction patterns fully consistent with the cubic Ia-3d space-group symmetry, and with a very different degree of hydrothermal alteration, were used in this work. High-resolution magic-angle spinning multinuclear magnetic resonance (MAS NMR) spectroscopy, including 29Si, 27Al, 23Na, 133Cs, and 1H spectra at 9.4 T, as well as 1H, 27Al, 27Al{1H} dipolar evolutions and 27Al{29Si} Heteronuclear Multiple Quantum Coherence (HMCQ) spectra at 17.6 T, has been used to investigate the local structure of pollucite and the role of protons. The 29Si spectra suggest a local structure with a disordered Si/Al distribution in only one tetrahedral T site, but with a preference of Si atoms for Q41 (3Si,1Al) and Q42 (2Si,2Al) environments, in comparison with random and Loewenstein distributions, due to charge dispersion effects. However, the 27Al{1H} dipolar evolutions suggest two spectroscopically distinct T sites for Al atoms. The 23Na and 133Cs spectra indicate broad site distributions for these cavity cations. The anisotropic character of the long-range disordered pollucite structure, with a pseudo-cubic symmetry and lack of strict periodicity, can be explained from an incipient displacive transition to lower symmetry. These pollucite specimens are essentially anhydrous minerals despite the 1H and the cross-polarization experiments suggesting that some protons exist in the structure as -OH groups, whereas water molecules were only found in relation to the phyllosilicate impurities from alteration in specimen Tanco and perhaps also as liquid water in fluid inclusions., This research was partially funded by Ministerio de Economía y Competitividad MAT2017-86450-C4-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Order–Disorder Diversity of the Solid State by NMR: The Role of Electrical Charges

  • Sánchez-Muñoz, Luis
  • Florian, Pierre
  • Muñoz, Francisco
The physical explanations and understanding of the order–disorder phenomena in the solid state are commonly inferred from the experimental capabilities of the characterization techniques. Periodicity is recorded according to the averaging procedure of the conventional reciprocal-space techniques (RSTs) in many solids. This approach gives rise to a sharp trimodal view including non-crystalline or amorphous compounds, aperiodic crystals and periodic crystals. However, nuclear magnetic resonance (NMR) spectroscopy offers an alternative approach that is derived from the distinct character of the measurements involved at the local scale. Here, we present a sequence of progressive order–disorder states, from amorphous structures up to fully ordered mineral structures, showing the great diversity existing in the solid state using multinuclear NMR spectroscopy. Some examples in glasses and products of their crystallization are used, as well as several minerals (including beryl-group and feldspar-group minerals) at magnetic fields up to 35.2 T, and some examples from literature. This approach suggests that the solid state is a dynamic medium, whose behavior is due to atomic adjustments from local compensation of electrical charges between similar structural states, which explains Ostwald’s step rule of successive reactions. In fully ordered feldspar minerals, we propose that the electronic structure of the elements of the cavity site is involved in bonding, site morphology and feldspar topology. Furthermore, some implications are derived about what is a mineral structure from the point of view of the NMR experiments. They open the possibility for the development of the science of NMR Mineralogy., This research was partially funded by Ministerio de Ciencia, Investigación y Universidades, MAT2017-86450-C4-1-R, and MAT2016-78362-C4-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of annealing in the formation of well-crystallized and textured SrFe12O19 films grown by RF magnetron sputtering

  • Delgado Soria, Guiomar
  • Serrano, A.
  • Prieto, J. E.
  • Quesada, Adrián
  • Gorni, Giulio
  • de la Figuera, Juan
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
10 pags., 7 figs., 4 tabs., We have studied the influence of the annealing treatment on the crystalline growth of SrFe12O19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without ex situ heating step, have been analyzed and compared to determine the differences in their structural, compositional, and magnetic properties. The results obtained by the different analysis techniques, in particular Mössbauer spectroscopy together with EXAFS and XANES data, suggest that the as-grown film is composed of nanocrystalline maghemite nanoparticles and amorphous strontium oxide. Specifically, Mössbauer spectroscopy results pointed out the presence of Fe3+ cations occupying octahedral and tetrahedral sites with hyperfine magnetic fields 49.3 T and 44.2 T, respectively, characteristic of a spinel-related structure. A strontium hexaferrite canonical structure with a c-axis orientation in the sample plane was found for the annealed film. Graphical abstract: [Figure not available: see fulltext.]., This work is supported by the Grants TED2021-130957B-C54, RTI2018-095303-B-C51, -A-C52 and -B-C53 , MAT2017-86450-C4-1-R funded by MCIN/AEI/10.13039/501100011033 by European Union NextGenerationEU/PRTR and by “ERDF A way of making Europe”, by the Grant S2018-NMT-4321 funded by the Comunidad de Madrid and by “ERDF A way of making Europe”, by the Ramon y Cajal Contract RYC-2017-23320 and by the European Commission through the H2020 Project no.720853 (AMPHIBIAN). We gratefully acknowledge the support from CMAM for the beamtime proposal with code STD009/20. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron and in collaboration with ALBA staf. A.S. acknowledges fnancial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract No. 2017-t2/IND539. We thank Dr S. Cortés for providing access to the Raman spectrometer and for his help in recording these data. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the interaction of solar radiation with colored glasses and its thermal behavior

  • Palomar Sanz, Teresa
  • Enríquez Pérez, Esther
[EN] Solar irradiation can induce different process on glasses. In this study, the thermal behavior of colored glasses (colorless, red, yellow, green, turquoise, blue, purple, and brown) were characterized by UV-vis-IR spectrophotometry, thermal conductivity-meter, infrared thermocamera and dilatometry. The calculation of the absorption coefficients and the thermal conductivity showed that the heating of each fragment depends predominantly on the chromophores. Blue, green and turquoise glasses present the highest NIR absorption, thermal conductivity, thermal expansion coefficient and the largest heating curve. In comparison with colorless glass, the expansion coefficient of bluish glasses is > 5·10¿7°C¿1 that can produce a thermal incompatibility with the formation of fissures and detachments., Authors acknowledge to Fernando Cortés (The Cathedral Studios, UK) for supplying the glass fragments. This work has been funded by the Fundación General CSIC (ComFuturo Programme) and the Spanish Research Agency (AEI, Ministry of Research and Innovation) (project MAT2017-86450-C4-1-R). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). The authors also wish to acknowledge the professional support of the CSIC Interdisciplinary Thematic Platform Open Heritage: Research and Society (PTI-PAIS).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel one-pot sol-gel synthesis route of Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix

  • Castellano-Soria, Alberto
  • López-Sánchez, Jesús
  • Granados-Miralles, Cecilia
  • Varela, María
  • Navarro, Elena
  • González, César
  • Marín, Pilar
[EN] Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The present approach is based on the combined action of oleic acid and oleylamine, which act sterically on the precursor micelles when a densification temperature is performed in a reducing atmosphere. The structural and magnetic evolution of the formed compounds is investigated, ranging from iron oxides such as Fe3O4 and FeO, to the formation of pure Fe3C/C samples from 700 ºC onwards. Interestingly, Fe3C nanoparticles with a size of ~20 nm crystallize immersed in the carbon matrix and the surrounding environment forms an oriented encapsulation built by few-layered graphene. The nanostructures show a saturation magnetization of ~43 emu/g and a moderate coercivity of ~500 Oe. Thereby, an innovative chemical route to produce single phase Fe3C nanoparticles is described, and an effective method of few-layered graphene passivation is proposed, yielding a product with a high magnetic response and high chemical stability against environmental corrosion., Ministerio de Ciencia de Innovación (MCINN), Spain, through the projects: MAT2015–65445-C2–1-R, MAT2017–86450-C4–1-R, MAT2015–67557-C2–1-P, RTI2018–095856-B-C21, RTI2018–095303-A-C52, PIE: 2021-60-E030, PIE: 2010–6-OE-013; and Comunidad de Madrid, Spain, by S2013/MIT-2850 NANOFRONTMAG and S2018/NMT-4321 NANOMAGCOST. The authors are also grateful for the electron microscopy characterization performed in the Centro Nacional de Microscopía Electrónica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM), support from MCINN grant # RTI2018–097895-B-43. C.G.-M. acknowledges the financial support from MICINN through the “Juan de la Cierva” Program (FJC2018–035532-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Greener processing of SrFe12O19 ceramic permanent magnets by two-step sintering

  • Guzmán-Mínguez, J. C.
  • Fuertes de la Llave, Víctor
  • Granados-Miralles, Cecilia
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
With an annual production amounting to 800 kilotons, ferrite magnets constitute the largest family of permanent magnets in volume, a demand that will only increase as a consequence of the rare-earth crisis. With the global goal of building a climate-resilient future, strategies towards a greener manufacturing of ferrite magnets are of great interest. A new ceramic processing route for obtaining dense Sr-ferrite sintered magnets is presented here. Instead of the usual sintering process employed nowadays in ferrite magnet manufacturing that demands long dwell times, a shorter two-step sintering is designed to densify the ferrite ceramics. As a result of these processes, dense SrFeO ceramic magnets with properties comparable to state-of-the-art ferrite magnets are obtained. In particular, the SrFeO magnet containing 0.2% PVA and 0.6% wt SiO reaches a coercivity of 164 kA/m along with a 93% relative density. A reduction of 31% in energy consumption is achieved in the thermal treatment with respect to conventional sintering, which could lead to energy savings for the industry of the order of 7.10 kWh per year., Spanish Ministerio de Economía y Competitividad through Projects no. RTI2018-095303-A-C52 MAT2017-86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, FIS2017-82415-R and through the Ramón y Cajal Contract RYC-2017-23320; and by the European Comission through Project H2020 no. 720853 (AMPHIBIAN). V.Fuertes holds a Sentinel North Excellence Postdoctoral Fellowship and acknowledges the economic support from the Sentinel North program of Université Laval, made possible, in part, thanks to funding from the Canada First Research Excellence Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sol-gel synthesis control of iron-cobalt alloy/ferrite core/shell nanoparticles supported by a carbon medium with semi-hard magnetic features

  • Castellano-Soria, Alberto
  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • Varela, María
  • Sardinero, Ignacio
  • Carmona, N.
  • Hernando, Antonio
  • Marín, Pilar
  • Navarro, Elena
12 pags., 7 figs., 3 tabs., We explore a simple and optimized approach for obtaining magnetic nanoparticle-carbon composites by a novel one-pot sol-gel method. In them, various metal cations ratios of Fe3+ and Co2+ are evaluated. The ratio of Fe:Co is a critical parameter that governs the presence of different crystalline phases with tailored magnetic properties. Interestingly, the smallest introduction of Co into the synthesis (19Fe:1Co) provides an abrupt emergence of the body-centered cubic (bcc) Fe-Co alloy, instead of the orthorhombic Pnma structure characteristic of the Fe3C intermetallic compound (1Fe:0Co). Advanced structural and electronic characterizations reveal the formation of Fe-Co/Co-ferrite core/shell nanoparticle structures embedded in a carbon matrix. The sphere-like nanoparticles range from 10 to 45 nm and the shells show a spinel structure with a thickness of 2–3 nm. In addition, X-ray absorption spectroscopy unveils that the oxidation state of Fe and Co cations is close to zero, demonstrating their predominant metallic character. The magnetic properties can be modulated by a precise control of the alloy composition varying the Co content, displaying saturation magnetization values close to ∼137 emu/g. The nanoparticles are mainly single magnetic domain with a considerable coercive field (∼450 Oe), higher than those reported in the literature for Fe-Co nanoparticles. This semi-hard character is due to a notable spring exchange effect emerged by passivating the surface of Fe-Co-bcc cores with a thin Co-ferrite-like shell., The work has been supported by the Ministerio de Ciencia e Innovación (MCINN) through the projects MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018–095856-B-C21, RTI2018–095303-A-C52, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51 and Comunidad de Madrid by S2013/MIT-2850 NANOFRONTMAG and S2018/NMT-4321 NANOMAGCOST. Electron microscopy measurements were carried out at the Centro Nacional de Microscopía Electrónica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors are grateful to The ESRF (France), MCINN and Consejo Superior de Investigations Científicas (CSIC, Spain) for the provision of synchrotron radiation facilities and to the BM25-SpLine Staff for their support. XAS experiments were also performed at the CLAESS-BL22 beamline at ALBA Synchrotron (Grant no. 2022025654) in collaboration with ALBA staff. Giulio Gorni acknowledges financial support from FJC2020–044866-I /MCIN/AEI/ 10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”. A.S. acknowledges financial support from the “Ayudas para contratos Ramón y Cajal” contract No. RYC2021-031236-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poling and depoling influence on the micro-stress states and phase coexistence in KNN-based piezoelectric ceramics

  • Val-Gómez, P.
  • Campo, Ángel Adolfo del
  • Rubio Marcos, Fernando
  • Fernández Lozano, José Francisco
  • Moure Arroyo, Alberto
[EN] In this work a microstructural qualitative and quantitative study of spatial stress distributions in modified KNN ceramics (KNaLi)Co (NbTaSb)O, according to the polarization state is shown. X-ray diffraction reflects a perovskite crystalline structure with coexistence of Tetragonal and Orthorhombic phases (T/O). Confocal Raman microscopy shows that these crystalline phases are distributed in randomly micrometric regions through the ceramic volume. Tetragonal regions show higher piezoelectric coefficient and exhibit a higher micro-stress that hardens the ferroelectric response. By the contrary, the occurrence of orthorhombic micro-regions softened the ferroelectric behavior and reduced their piezoelectric coefficients. The ferroelectric response of ceramics is studied, where poling is also shown as a factor that affects the spatial micro-stress distributions. Finally, a model that relates the results obtained by Raman characterization with the ferroelectric properties and stress states is proposed., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the projects MAT2017-86450-C4-1-R, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. Dr. Alberto Moure and Dr. F. Rubio-Marcos are indebted to MINECO for a ‘Ramon y Cajal’ contracts (ref: RYC-2013-14436 and RyC-2015-18626 respectively), which are co-financed by the European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the milling conditions on the thermal decomposition of Bayer gibbsite

  • Rivas Mercury, J.M.
  • Sucupira, J.R.M.
  • Rodríguez, M.A.
  • Cabral, A.A.
  • Aza Moya, Antonio H. de
  • Pena, Pilar
A synthetic gibbsite (Al(OH)3) produced by the Bayer process was mechanically activated by attrition milling for 24 h with various grinding ball-to-powder ratios (BPR = 5, 10 and 20). Changes in its structure were studied by thermal analysis and X-ray diffraction. As a result of increasing ball-to-powder ratio, the grain size of gibbsite decreased while its specific surface area increased. Only for these materials, the formation of nanocrystalline boehmite (AlO·OH) and amorphous aluminium hydroxides was also observed. Upon having been heat treated between 200 and 1200 °C (2 h), boehmite was detected at the temperature range of 200 and 350 °C for the BPR10 sample, while the boehmite of BPR20 was transformed to γ- Al2O3 at 500 °C. Further, only α-Al2O3 was detected at 1200 °C for all samples. Finally, combining the TG-DSC, XRD and SEM results, it was proposed a mechanism for the thermal decomposition of the non-milled and milled samples. © 2019 Elsevier B.V., The financial support of the Spanish Ministry of Economy and Competitiveness (MINECO) Projects MAT2013-48426-C2-1-R; MAT2017- 86450-C4-1-R and of the Brazilian research funding agency FAPEMA (Maranhão Foundation for Scientific Research and Development) through Project Apoio Cooperações Internacionais Edital n° 44/2013 – APCInter is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical aspects in the handling of reactive silica in cementitious materials: Effectiveness of rice husk ash vs nano-silica in mortar dosage

  • Torres-Carrasco, Manuel
  • Jiménez Reinosa, Julián
  • Rubia, Miguel Ángel de la
  • Reyes, E.
  • Alonso Peralta, F.
  • Fernández Lozano, José Francisco
Nano-silica addition improves mechanical and durability behavior in mortars. However, nanomaterial handling requires use of occupational risk prevention measures as Individual Protection Equipment for the workers. Moreover, the high agglomeration of nanomaterials produces uncertainty in the expected mortar performance. Rice husk ash as a source of reactive silica in cement compositions is compared with nano-silica. The use of rice husk ash provides similar physical-chemical cementitious materials than other commercial nano-silica providing relevant differences during the composition. Near 50% wt of volatility is found for the silica nanoparticles during the handling dosage. Thus, the rice husk ash presents a reduced volatility, ∼12% wt and it allows ensuring high content with adequate workability. Mortars with addition of rice husk ash reach higher compressive strength and resistivity in correlation with lower porosity. For that, the use of rice husk ash is viable as safer alternative material than nano-silica in the cementitious compositions. In addition, as the rice husk ash comes from agricultural waste resources their use as secondary raw material will contributes to circularity in the economy by reducing engineered nanomaterials consumption. © 2019 Elsevier Ltd, This work was supported by the Spanish Ministry of Economy and Competitiveness through the Project MAT-2017-86450-C4-1-R, Spanish National Research Council under Project NANOMIND 201560E068 and H2020 project FISSAC grant 642154. Dr. M. Torres-Carrasco is also indebted to MINECO for a postdoctoral fellowship “Juan de la Cierva-Formación” (ref: FJCI-2016-28488)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the magnetic properties of Fe3C/C encapsulated core/shell nanoparticles for potential prospects in biomedicine

  • Castellano-Soria, A.
  • López-Méndez, R.
  • Espinosa, A.
  • Granados-Miralles, Cecilia
  • Varela, M.
  • Marín, P.
  • Navarro, E.
  • López-Sánchez, Jesús
In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles through fine-tuning of the sol-gel synthesis parameters. Specifically, the impact of decreasing each surfactant concentration added, nt, the same both for oleylamine (ON) and oleic acid (OA), has been explored. A minimum value for such parameter denoted by nt,min. was required to produce pure Fe3C@C NP-composites. For nt < 4 mmol, some minor α-Fe impurities arise, and the effective carburization becomes unstable due to insufficient carbon. The magnetic properties of the materials prepared were optimized by reducing the excess carbon from surfactants, resulting in saturation magnetization values of 86 emu/g. (for pure Fe3C at nt = 5 mmol) and 102 emu/g (for Fe3C and <2 % w.t. of α-Fe impurity at nt = 4 mmol). In view of this, several cytotoxicity studies for different Fe3C@C samples were conducted, exhibiting excellent biocompatibility in cell-based assays, which could lead to potential application at the forefront of biomedical fields. © 2024 The Authors, The work has been supported by the Ministerio de Ciencia e Innovacion (MCINN) through the projects PDC2022-133039-I00, PID2021-123112OB-C21-MICIIN, TED2021-129688B-C21, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095856-B-C21, RTI2018-095303-A-C52, PID2020-114192RB-C41, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51, FPI PRE2020-96246 grant (R.L-M.), and Comunidad de Madrid by NANOMAGCOST-CM, S2013/MIT-2850 NANOFRONTMAG, (MAD2D-CM)-UCM3, S2018/NMT-4321 NANOMAGCOST, 2018-T1/IND-1005 (A.E.) and S2022/BMD-7434 ASAP-CM. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation through the project PID2021-122980OB-C5 and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). Electron microscopy measurements were carried out at the Centro Nacional de Microscopia Electronica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors also acknowledge the BM25-SpLine Staff for their valuable help and the provision of the beamline under the projects A25-2-1053 and A25-2-1009., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ thermal runaway of Si-based press-fit diodes monitored by infrared thermography

  • Moure Arroyo, Alberto
  • Román-Sánchez, Sara
  • Serrano Rubio, Aída
  • Lorite, Israel
  • Fernández Lozano, José Francisco
Overvoltage is one of the main causes that lead to the failure of electronic devices. This makes fundamental to understand the electrical and thermal mechanisms engaged in the process. In this work, the influence of the semiconductor technology on the thermal runaway involved in the dielectric breakdown of commercial press-fit diodes, operating in reverse conditions, has been studied. Infrared thermography has been used to monitor the temperature evolution before, during and after the failure. Schottky and Metal oxide semiconductor devices, based on Si, have been evaluated following this methodology. The current flowing through the diode causes its temperature to rise, which increases the current with a further increase in temperature that triggers the avalanche process. The diode configuration conditions the heating associated with the spark appearing during the breakdown. This process is faster for Schottky diodes than for Metal oxide semiconductors, leading to higher temperatures. Besides, mechanical breaking is observed in the semiconductor due to the stresses generated during the fast heating-cooling processes after the different breakdowns events. The reached temperatures are enough to melt the solder that creates an electrical path, which short-circuits the diodes and leads to their final failure. These differences in the failure behavior must be taken into account to choose the adequate technology in practical applications. © 2020 Elsevier B.V., All rights reserved., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project MAT2017-86450-C4-1-R and RTI2018-095303-A-C52. Dr. Alberto Moure is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395). The authors acknowledge to Marta Furio for the CT-scan measurements at the “Museo Nacional de Ciencias Naturales”., Appendix A. Supplementary data at DOI: https://doi.org/10.1016/j.rinp.2020.103529, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the design on the thermal response of press-fit diodes: An infrared thermographic study

  • Moure Arroyo, Alberto
  • Serrano Rubio, Aída
  • Román-Sánchez, Sara
  • Lorite, Israel
  • Fernández Lozano, José Francisco
A critical effect in the field of the power semiconductors is their heating processes under high currents regime, in the order of amperes. The thermal characterization in working conditions is not always an easy task, and its over/underestimation can lead to failures in the design of the devices. Infrared thermography measurements are shown in this work as a valuable tool to determine the temperature mapping, profiles and heating and cooling rates of diodes under working conditions. Press-fit metal-oxide semiconductors commercial diodes with different designs from two different suppliers have been analyzed. This work provides elements that relate the dissipated power and the release of heat with the design. © 2021 Elsevier B.V., All rights reserved., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project MAT2017-86450-C4-1-R and RTI2018-095303-A-C52. Dr. Alberto Moure is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-Induced Capacitance Tunability in Ferroelectric Crystals

  • Páez-Margarit, David
  • Rubio Marcos, Fernando
  • Ochoa, Diego A
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • García, José E
The remote controlling of ferroic properties with light is nowadays a hot and highly appealing topic in materials science. Here, we shed light on some of the unresolved issues surrounding light-matter coupling in ferroelectrics. Our findings show that the capacitance and, consequently, its related intrinsic material property, i.e., the dielectric constant, can be reversibly adjusted through the light power control. High photodielectric performance is exhibited across a wide range of the visible light wavelength because of the wavelength-independence of the phenomenon. We have verified that this counterintuitive behavior can be strongly ascribed to the existence of "locally free charges" at domain wall., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under projects MAT2017-86450-C4-1-R, and by the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. The authors thank Dr. Yudania Sánchez, at the Catalonia Institute for Energy Research (IREC), for help in ITO deposition. F. R-M. is also indebted to MINECO for a “Ramon y Cajal” contract (ref: RyC-2015-18626), which is cofinanced by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photo-Controlled Ferroelectric-Based Nanoactuators

  • Rubio Marcos, Fernando
  • Páez-Margarit, David
  • Ochoa, Diego A
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • García, José E
Finding a feasible principle for a future generation of nano-optomechanical systems is a matter of intensive research, because it may provide new device prospects for optoelectronics and nanomanipulation techniques. Here we show that the strain of a ferroelectric crystal can be manipulated to achieve macroscopic, stable, and reproducible dimensional changes using illumination with photon energy below the material bandgap. The photoresponse can be activated without direct light incidence on the actuation area, because the cooperative nature of the phenomenon extends the photoinduced strain to the whole material. These results may be useful for developing the next generation of high-efficiency photocontrolled ferroelectric devices., This work is supported by the MINECO (Spanish Government) project MAT2017-86450-C4-1-R. F.R-M is indebted to MINECO for a “Ramon y Cajal” contract (ref: RyC-2015-18626), which is cofinanced by the European Social Fund. F.R-M also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation). The authors thank Dr. Trifon Trifonov (Barcelona Research Center in Multiscale Science and Engineering) for technical support in the profilometry measurements., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Boosting the tunable microwave scattering signature of sensing array platforms consisting of amorphous ferromagnetic Fe_2.25Co_72.75Si_10B_15 microwires and its amplification by intercalating cu microwires

  • Archilla Sanz, Diego
  • López Sánchez, Jesús
  • Hernando Grande, Antonio
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
The following work addresses new configurations of sensing array platforms that are composed of Co-based amorphous ferromagnetic microwires (MWs) to obtain an enhanced modulation of the microwave scattering effects through the application of low strength DC or AC magnetic fields. An amorphous MW is an ultrasoft ferromagnetic material (coercivity similar to 0.2 Oe) with a circumferential magnetic anisotropy that provides a high surface sensitivity when it is subjected to an external magnetic field. Firstly, microwave scattering experiments are performed as a function of the length and number of MWs placed parallel to each other forming an array. Subsequently, three array configurations are designed, achieving high S_21 scattering coefficients up to about -50 dB. The influence of DC and AC magnetic fields on S_21 has been analyzed in frequency and time domains representation, respectively. In addition, the MWs sensing array has been overlapped by polymeric surfaces and the variations of their micrometric thicknesses also cause strong changes in the S_21 amplitude with displacements in the frequency that are associated to the maximum scattering behavior. Finally, a new concept for amplifying microwave scattering is provided by intercalating Cu MWs into the linear Co-based arrays. The designed mixed system that is composed by Co-based and Cu MWs exhibits a higher S_21 coefficient when compared to a single Co-based MW system because of higher electrical conductivity of Cu. However, the ability to modulate the resulting electromagnetic scattering is conferred by the giant magneto-impedance (GMI) effects coming from properties of the ultrasoft amorphous MWs. The mixed array platform covers a wide range of sensor applications, demonstrating the feasibility of tuning the S_21 amplitude over a wide scattering range by applying AC or DC magnetic fields and tuning the resonant frequency position according to the polymeric slab thickness.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Sol-gel synthesis control of iron-cobalt alloy/ferrite core/shell nanoparticles supported by a carbon medium with semi-hard magnetic features

  • Castellano Soria, Alberto
  • López Sánchez, Jesús
  • Serrano, Aida
  • Gorni, Giulio
  • Varela Del Arco, María
  • Sardinero, Ignacio
  • Carmona Tejero, Noemí
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
  • Navarro Palma, Elena
We explore a simple and optimized approach for obtaining magnetic nanoparticle-carbon composites by a novel one-pot sol-gel method. In them, various metal cations ratios of Fe3+ and Co2+ are evaluated. The ratio of Fe:Co is a critical parameter that governs the presence of different crystalline phases with tailored magnetic properties. Interestingly, the smallest introduction of Co into the synthesis (19Fe:1Co) provides an abrupt emergence of the body-centered cubic (bcc) Fe-Co alloy, instead of the orthorhombic Pnma structure characteristic of the Fe3C intermetallic compound (1Fe:0Co). Advanced structural and electronic characterizations reveal the formation of Fe-Co/Co-ferrite core/shell nanoparticle structures embedded in a carbon matrix. The sphere-like nanoparticles range from 10 to 45 nm and the shells show a spinel structure with a thickness of 2–3 nm. In addition, X-ray absorption spectroscopy unveils that the oxidation state of Fe and Co cations is close to zero, demonstrating their predominant metallic character. The magnetic properties can be modulated by a precise control of the alloy composition varying the Co content, displaying saturation magnetization values close to ∼137 emu/g. The nanoparticles are mainly single magnetic domain with a considerable coercive field (∼450 Oe), higher than those reported in the literature for Fe-Co nanoparticles. This semi-hard character is due to a notable spring exchange effect emerged by passivating the surface of Fe-Co-bcc cores with a thin Co-ferrite-like shell