Pasar al contenido principal

INTEGRACION DE NANOESTRUCTURAS FOTONICAS CON HUELLA ECOLOGICA REDUCIDA MEDIANTE PROCESOS LASER PARA EMISION DE LUZ Y SENSORES OPTICOS

RTI2018-096498-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Ellipsometric characterization of Bi and Al2O3 coatings for plasmon excitation in an optical fiber sensor

  • Rodríguez Schwendtner, E.
  • Álvarez-Herrrero, Alberto
  • Mariscal, A.
  • Serna, R.
  • González Cano, A.
  • Navarrete, M. C.
  • Díaz Herrera, N.
The authors present the results of the ellipsometric characterization of thin layers of bismuth and aluminum oxide deposited over the waist of a tapered optical fiber by pulsed laser deposition. The characteristics of the deposits are studied by spectroscopic ellipsometry. From the effective thicknesses determined by the ellipsometric characterization, it is shown by simulations that surface plasmon resonances (SPRs) can occur in the fiber device, and it is demonstrated experimentally. These results show the feasibility of employing bismuth as a plasmonic material in SPR fiber sensors based on doubly-deposited uniform-waist tapered optical fibers, which show excellent performance and versatility. Published by the AVS., This work has been partially funded by Spanish Project (No. RTI2018-096498-B-I00) (MCIU/AEI/FEDER, UE) and by Santander-UCM Research Project (Ref. No. PR75/18-21568). A. Mariscal acknowledges financial support through No. BES-2013-062593; With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737)., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Contribución de congreso (ConferenceOutput)

Round-off noise estimation of fixed-point algorithms using Modified Affine Arithmetic and Legendre Polynomials

  • Esteban, L.
  • López Martín, E.
  • Regadío, A.
Conference Location: Segovia, Spain, The implementation of algorithms in fixed-point format causes the apparition of Round-Off Noise which propagates through the different functional units of the system. This issue causes the Signal-to-Noise Ratio of the outputs is degraded. Given an algorithm, it is essential to estimate the integer and fractional bit-widths of all the variables and operations to comply with the Signal-to-Noise Ratio requirements. In this context, Affine Arithmetic can obtain fast and accurate estimations of the bit-widths for linear systems. However, for non-linear systems, Affine Arithmetic loses the temporal correlation of the variables. Other existing frameworks are either time consuming or lead to inaccurate bound estimations. In this paper, a Modified Affine Arithmetic framework with Legendre polynomials is used to obtain fast and accurate bound estimations also for non-linear systems. Moreover, the approach proposed in this paper obtains speedups in the range of 7 to 100 compared to Monte-Carlo simulations, This work has been partially supported by the spanish MINECO under projects AYA2015-65973-C3-3-R and RTI2018-096228-B-C33
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ellipsometric characterization of Bi and Al2O3 coatings for plasmon excitation in an optical fiber sensor

  • Rodríguez-Schwendtner, Eva
  • Álvarez-Herrero, Alberto
  • Mariscal, A.
  • Serna, Rosalía
  • González-Cano, Agustín
  • Navarrete, María Cruz
  • Díaz-Herrera, Natalia
6 pags., 10 figs., The authors present the results of the ellipsometric characterization of thin layers of bismuth and aluminum oxide deposited over the waist of a tapered optical fiber by pulsed laser deposition. The characteristics of the deposits are studied by spectroscopic ellipsometry. From the effective thicknesses determined by the ellipsometric characterization, it is shown by simulations that surface plasmon resonances (SPRs) can occur in the fiber device, and it is demonstrated experimentally. These results show the feasibility of employing bismuth as a plasmonic material in SPR fiber sensors based on doubly-deposited uniform-waist tapered optical fibers, which show excellent performance and versatility., This work has been partially funded by Spanish Project (No. RTI2018-096498-B-I00) (MCIU/AEI/FEDER, UE) and by Santander-UCM Research Project (Ref. No. PR75/ 18-21568). A. Mariscal acknowledges financial support through No. BES-2013-062593., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring metal-dielectric nanocomposite materials with ultrashort laser pulses for dichroic color control

  • Sharma, N.
  • Destouches, N.
  • Florian, Camilo
  • Serna, Rosalía
  • Siegel, Jan
11 pags. 9 figs., Metal-dielectric nanocomposites are multiphase material systems containing nanostructures, whose size and arrangement determine the optical properties of the material, enabling the production of new materials with custom-designed response. In this paper, we exploit a femtosecond laser-based strategy to fabricate nanocomposites based on silver nanoparticles (Ag NPs) with tunable optical spectral response. We demonstrate how the spectral response, specifically color and dichroic response, is linked to Ag NPs growth and self-organization processes that are controlled locally by the choice of the laser irradiation parameters, such as scan speed and laser light polarization. When the scan speed increases, the Ag NPs are formed at larger depths below the film surface and give rise to the formation of embedded NPs gratings. As a result, the effective optical properties of the films are strongly modified enabling the display of a broad range of solid colors in the visible region. Furthermore, the choice of the laser light polarization allows to fabricate films either with iridescent or dichroic properties (linear polarization) or with non-diffractive and non-dichroic colors (circular polarization). Finally, the high spatial control over the transformed areas achieved with the laser processing, allows the building of hybrid nanostructures by means of interlacing structures with different optical responses. These results demonstrate the high potential of fs-laser technology to process Ag-based nanocomposites to fabricate coatings with a designed reflectivity, transmission, diffraction, as well as polarization anisotropy response. The Ag nanocomposites investigated in this work hold great promise for a broad range of applications especially for coloring, for enhanced visual effects, and for smart information encoding for security applications., This work was partially supported by the joint project SAMUL (2018FR0026) within the PICS programme between the CSIC and the CNRS. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). JSi, RS and CF acknowledge the Spanish Ministry of Science, Innovation and Universities for financial support through research grants UDiSON (TEC2017-82464-R) and SENSIL (RTI2018-096498-B-I00) (MCIU/AEI/FEDER, UE), as well as the CSIC for the intramurales project 201850E057. ND and NS acknowledge the Region Auvergne Rhone-Alpes, ANR project MIXUP (ANR-18-CE39-0010) and LABEX MANUTECH-SISE (ANR-10-LABX-0075) of Université de Lyon, within the program Investissements d'Avenir (ANR-11-IDEX-0007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Role of the La/K Compositional Ratio in the Properties of Waveguides Written by Fs-Laser Induced Element Redistribution in Phosphate-Based Glasses

  • Moreno-Zarate, Pedro
  • Muñoz, Francisco
  • Sotillo, Belén
  • Macías-Montero, M.
  • Atiénzar, Julia
  • Garcia-Pardo, Marina
  • Fernández, Paloma
  • Serna, Rosalía
  • Solís Céspedes, Javier
The local modification of the composition of glasses by high repetition femtosecond laser irradiation is an attractive method for producing photonic devices. Recently, the successful production of waveguides with a refractive index contrast (Δn) above 10<sup>−2</sup> by fs-laser writing has been demonstrated in phosphate glasses containing La<sub>2</sub>O<sub>3</sub> and K<sub>2</sub>O modifiers. This large index contrast has been related to a local enrichment in lanthanum in the light guiding region accompanied by a depletion in potassium. In this work, we have studied the influence of the initial glass composition on the performance of waveguides that are produced by fs-laser induced element redistribution (FLIER) in phosphate-based samples with different La and K concentrations. We have analyzed the contribution to the electronic polarizability of the different glass constituents based on refractive index measurements of the untreated samples, and used it to estimate the expected index contrast caused by the experimentally measured local compositional changes in laser written guiding structures. These estimated values have been compared to experimental ones that are derived from near field images of the guided modes with an excellent agreement. Therefore, we have developed a method to estimate before-hand the expected index contrast in fs-laser written waveguides via FLIER for a given glass composition. The obtained results stress the importance of considering the contribution to the polarizability of all the moving species when computing the expected refractive index changes that are caused by FLIER processes., This research was funded through grant numbers TEC2017-82464-R, MAT2017-87035-C2-1-P,and RTI2018-096498-B-I00 (MCIU/AEI/FEDER, EU).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformal covering and optical response of pulsed laser deposited bidimensional Ag nanoparticle arrays

  • Soria, Esther
  • Baraldi, G.
  • Martínez-Orts, M.
  • Toudert, Johann
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
7 pags., 7 figs., We demonstrate successful nanometric conformal coverage by pulsed laser deposition (PLD) of Ag nanoparticle (NP) arrays with a transparent amorphous AlO layer. The Ag NPs-arrays are formed by a bimodal distribution of well separated spheroidal Ag NPs with an average in-plane diameter of 40 or 90 nm and a maximum height of ∼70 nm. The cover layer induces no relevant alteration of the morphology and organization of the underlying Ag NPs-arrays. The conformal nature of the AlO cover layer is confirmed by its surface topography that shows the presence of characteristic nanodomes, with sizes determined by those of the underlying Ag NPs. The distinctive tapered shape of the nanodomes is related to the angular dependence with respect to the NPs surface normal of the deposition rate and the self-sputtering induced by energetic Al ions present in the laser generated plasma. The presence of the amorphous AlO cover layer red-shifts the characteristic dipolar and quadrupolar Surface Plasmon Resonances of Ag NPs and increases the total and diffuse reflectance of the NPs arrays., M.M-O. ac-knowledges thefinancial support of the Autonomous Community of Madrid and the European Social Fund [contract E-28-2017-0679526] and G.B. a CSIC-JAE predoctoral grant, cofounded by the European Social Fund. This work was partially funded by the Spanish Ministry of Science, Innovation and Universities [projects MINECO/FEDERTEC2015-69916-C2-1-R and MICINN RTI2018-096498-B-I00]
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical properties of bismuth nanostructures towards the ultrathin film regime

  • Toudert, Johann
  • Serna, Rosalía
  • Deeb, C.
  • Rebollar, Esther
13 pags., 9 digs., 1 tab. -- Open Access funded by Creative Commons Atribution Licence 4.0, Bulk bismuth presents outstanding optical properties, such as a giant infrared refractive index (n~10) and a negative ultraviolet-visible permittivity induced by giant interband electronic transitions. Although such properties are very appealing for applications in nanophotonics, the dielectric function of bismuth nanostructures has been scarcely studied. Here, we determine by spectroscopic ellipsometry the far infrared-to-ultraviolet dielectric function of pulsed laser deposited bismuth thin films with nominal thickness tBi varied from near 10 nm to several tens of nm. For t > 15 nm, the films display a continuous structure and their dielectric function is comparable with that of bulk bismuth. For t < 15 nm, the film structure is discontinuous, and the dielectric function differs markedly from that of bulk bismuth. It is proposed from FDTD simulations that this marked difference arises mainly from effective medium effects induced by the discontinuous film structure, where quantum electronic confinement does not play a dominant role. This suggests that ultrathin and continuous bismuth films should present the same outstanding optical properties as bulk bismuth for high performance nanophotonic devices., Ministerio de Ciencia, Innovación y Universidades (MICINN) (MICINN RTI2018-096498-B-I00, MINECO/FEDER TEC2015-69916-C2-1-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the period of femtosecond laser induced surface structures in steel: From angled incidence to quill writing

  • Fuentes-Edfuf, Yasser
  • Sánchez-Gil, José A.
  • Garcia-Pardo, Marina
  • Serna, Rosalía
  • Tsibidis, G. D.
  • Giannini, V.
  • Solís Céspedes, Javier
  • Siegel, Jan
8 pags., 8 figs., 1 app., Exposure of metal surfaces to multiple ultrashort laser pulses under certain conditions leads to the formation of well-defined periodic surface structures. We show how the period of such structures in steel can be tuned over a wide range by controlling the complex interaction mechanisms triggered in the material. Amongst the different irradiation parameters that influence the properties of the induced structures, the angle of incidence of the laser beam occupies a prominent role. We present an experimental and theoretical investigation of this angle dependence in steel upon irradiation with laser pulses of 120¿fs duration and 800¿nm wavelength, while moving the sample at constant speed. Our findings can be grouped into two blocks. First, we observe the spatial coexistence of two different ripple periods at the steel surface, both featuring inverse scaling upon angle increase, which are related to forward and backward propagation of surface plasmon polaritons. To understand the underlying physical phenomena, we extend a recently developed model that takes into account quantitative properties of the surface roughness to the case of absorbing metals (large imaginary part of the dielectric function), and obtain an excellent match with the experimentally observed angle dependence. As second important finding, we observe a quill writing effect, also termed non-reciprocal writing, in form of a significant change of the ripple period upon reversing the sample movement direction. This remarkable phenomenon has been observed so far only inside dielectric materials and our work underlines its importance also in laser surface processing. We attribute the origin of symmetry breaking to the non-symmetric micro- and nanoscale roughness induced upon static multiple pulse irradiation, leading to non-symmetric modification of the wavevector of the coupled surface plasmon polariton., JSi, JSo and YF acknowledge the Spanish Ministry of Science,Innovation and Universities forfinancial support through researchgrant UDiSON (TEC2017-82464-R), the European Commission for grantLiNaBioFluid (FETOPEN 665337) and Consejo Superior deInvestigaciones Científicas for the project INTRAMURALES201850E057. RS acknowledges thefinancial support from the Spanishproject RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). VG and JASGacknowledge the Spanish Ministerio de Economia y Competitividad forfinancial support through the grants LENSBEAM (FIS2015-69295-C3-2-P) and NANOTOPO (FIS2017-91413-EXP), and also Consejo Superiorde Investigaciones Científicas (INTRAMURALES 201750I039). G.D.T.acknowledgesfinancial support from Nanoscience Foundries and FineAnalysis (NFFA)–Europe H2020-INFRAIA-2014-2015 (under Grantagreement No 654360) and COST Action TUMIEE (supported by COST-European Cooperation in Science and Technology)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoluminescence and stoichiometry correlation in nanocrystalline EuOx thin films: Tunable colour emission

  • Mariscal, A.
  • Tarazaga Martín-Luengo, Aitana
  • Galiana, Beatriz
  • Ballesteros, Carmen
  • Bonanni, Alberta
  • Martín-Sánchez, Javier
  • Serna, Rosalía
The development of broadband and ultra-compact optoelectronic devices relies on the possibility of fabricating bright and tunable emitters at the nanoscale. Here we show emission from EuOx (1 ≤ x < 1.4) thin films on Silicon formed by nanocrystals with average sizes in the range of 5 nm. The photoluminescence emission of the nano-EuOx films is tunable as a function of the oxygen concentration changing from a green broadband Eu2+−related emission to a narrow red Eu3+−related emission. To achieve these results has been instrumental the use of a new methodology specially designed to achieve high quality europium oxide films whose compositional properties are controlled by the growth base pressure and preserved thanks to a chemically stable and transparent cover layer of Al2O3. Our findings confirm the outstanding p otential of nanostructured EuOx films as “onecompound” optical elements with tunable emission properties for their implementation in integrated silicon-based devices, This work has been financially supported by the Spanish Ministerio de Ciencia e Innovación through grant RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). Support by the EC’s Horizon2020 Research and Innovation Programme (grant 645776), by the Austrian Science Fund – FWF (P24471 and P26830), and by the NATO Science for Peace Programme (grant 984735) is acknowledged. A.M-J. acknowledges the financial support through BES-2013-062593. J. M-S acknowledges financial support through the Ramón y Cajal Program from the Government of Spain and FSE (RYC2018-026196-I). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active analog tuning of the phase of light in the visible regime by bismuth-based metamaterials

  • Garcia-Pardo, Marina
  • Nieto-Pinero, Eva
  • Petford-Long, Amanda K.
  • Serna, Rosalía
  • Toudert, Johann
12 pags., 6 figs.; 1 tab. 1 app., The active and analog tuning of the phase of light by metamaterials is needed to boost the switching performance of photonic devices. However, demonstrations of this type of tuning in the pivotal visible spectral region are still scarce. Herein, we report the active analog tuning of the phase of visible light reflected by a bismuth (Bi)-based metamaterial, enabled by a reversible solid-liquid transition. This metamaterial, fabricated by following a lithography-free approach, consists of two-dimensional assemblies of polydisperse plasmonic Bi nanostructures embedded in a refractory and transparent aluminum oxide matrix. The analog tuning of the phase is achieved by the controlled heating of the metamaterial to melt a fraction of the nanostructures. A maximum tuning of 320° (1.8 π) is observed upon the complete melting of the nanostructures at 230°C. This tuning is reversible by cooling to 25°C. In addition, it presents a wide hysteretic character due to liquid Bi undercooling. This enables the phase achieved by this analog approach to remain stable over a broad temperature range upon cooling and until re-solidification occurs around 100°C. Therefore, Bi-based metamaterials are endowed with analog optical memory capabilities, which are appealing for a wide range of applications, including optical data storage with enhanced information density or bistable photonic switching with a tunable "on" state., This research was supported by Spanish grants RTI2018-096498-B-I00, Funder Id: http://dx.doi.org/10.13039/100014440 (MCIU/AEI/ FEDER, UE) and LINKA20044, Funder Id: http://dx.doi. org/10.13039/501100003339 (CSIC). AKPL is grateful to the National Science Foundation under Collaborative Grant #DMR 1600837, Funder Id: http://dx.doi. org/10.13039/100000001 for funding. Use of the Center for Nanoscale Materials, an Office of Science user facility, was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357, Funder Id: http://dx.doi. org/10.13039/100006151. E.N.P. acknowledges funding from Comunidad de Madrid (Spain), Garantia Juvenil contract PEJ-2018-AI/IND-10888.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the properties of GaP supersaturated with Ti

  • Olea, J.
  • Algaidy, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Montero, D.
  • Caudevilla, D.
  • González-Díaz, G.
  • Soria, Esther
  • Gonzalo de los Reyes, J.
8 pags., 7 figs., 2 tabs., We have fabricated GaP supersaturated with Ti by means of ion implantation and pulsed-laser melting to obtain an intermediate band material with applications in photovoltaics. This material has a strong sheet photoconductance at energies below the bandgap of GaP and it seems to be passivated by a Ga defective GaPO oxide layer during the laser process. Passivation is consistently analyzed by sheet photoconductance and photoluminescence measurements. We report on the structural quality of the resulting layers and analyze the energy of the new optical transitions measured on GaP:Ti. A collapse found in the sheet photoconductance spectra of GaP:Ti samples fabricated on undoped substrates is explained by the negative photoconductivity phenomenon., Authors would like to acknowledge the C.A.I. de Tecnicas Físicas of the Universidad Complutense de Madrid for ion implantation and evaporation processes. Also, the Institute for Optoelectronics Systems and Microtechnology of the Universidad Politecnica de Madrid for photoluminescence experiments. The fabrication of TEM samples were conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon (LMA-INA) ofthe Universidad de Zaragoza. Authors acknowledge the LMA-INAfor offering access to their instruments and expertise, and the Centro Nacional de Microelectronica at the Moncloa Campus for theTEM and XEDS measurements.This work was partially supported by the Spanish Ministry of Science, Innovation and Universities/FEDER under grants TEC2017-84378-R and RTI 2018-096498-B-I00. The work of D. Montero wasbsupported by the Spanish MINECO under contract BES-2014-067585. This work is part of the project MADRID-PV2 P-2018/EMT-4308 funded by the Regional Government of Madrid with thesupport from FEDER funds
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-Assembled, 10 nm-Tailored, Near Infrared Plasmonic Metasurface Acting as Broadband Omnidirectional Polarizing Mirror

  • Soria, Esther
  • Gómez-Rodríguez, Pilar
  • Tromas, Christophe
  • Camelio, S.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
  • Toudert, Johann
  • Babonneau, D.
10 pags., 4 figs., Plasmonic metasurfaces tailored at the few-nanometers scale and fabricated by high-throughput lithography-free methods are needed to efficiently produce optical components with optimal performance and small footprint. Herein, the design of such metasurfaces and their fabrication over cm areas by self-assembly are reported. They present an optical cavity structure, in which a 2D array of parallel Au nanorods is coupled to a metal mirror through a thin spacer. The nanorods present a quasi-monodisperse ≈10 nm diameter and separation, and a broad polydisperse length distribution. These remarkable nanostructural features, combining periodicity in one direction with randomness in another, endow the nanorod array with unconventional plasmonic and anisotropic effective optical properties. Thanks to these properties, for light polarized along the nanorods, the metasurface displays strong destructive optical interference and thus near-perfect absorption over a broad range of angles of incidence and of wavelengths in the near infrared. In contrast, for light polarized perpendicular to the nanorods, no such interference occurs and thus the metasurface behaves as a metal mirror. In sum, the metasurface can be used as broadband omnidirectional polarizing mirror, an original thin and monolithic optical component merging the functionalities of a metal mirror and of a wire-grid polarizer., This research was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grant RTI 2018‐096498‐B‐I00, and the CSIC (PIE-202050E195 project). The work of P.G.-R. was supported by the Autonomous Community of Madrid and the European Social Fund (contract E-28‐2019‐0767805)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic ellipsometry study of Cu2ZnSn(SxSe1-x)4 bulk polycrystals

  • Levcenko, S.
  • Hajdeu-Chicarosh, E.
  • Serna, Rosalía
  • Guc, Maxim
  • Victorov, I. A.
  • Nateprov, A.
  • Caballero, Raquel
  • Merino, J. M.
  • Arushanov, E.
  • León, M.
6 pags., 4 figs., 2 tabs., The pseudo dielectric function of CuZnSn(SSe) [x = 0.35, 0.62, 0.81] bulk polycrystals is determined over the range 1.1–4.6 eV at room temperature from the analysis of spectroscopic ellipsometry data using the Adachi model. From the analysis, the lowest E transition and high energy E and E transitions are clearly identified, and used to follow the evolution of the pseudo dielectric function as a function of the composition. It is shown that the fundamental E and high energy E transitions can be tuned by increasing the sulfur content over a range of 0.3 eV. These results show the potential of the kesterite compounds for the design of efficient tailored photovoltaic solar cells., The research leading to the presented results was partially supported by the European Project INFINITE-CELL (Ref. H2020-MSCA-RISE-2017-777968, 2017e2021,www.infinitecell.eu) andthe Spanish MINECO Projects“WINCOST”(ENE2016-80788-C5-2-R) and“SENSIL”RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE).The authors from the Institute of Applied Physics appreciate the financial support from the Bilateral Project No. ANCD19.80013.16.02.01F/BL and from the Institutional Project No. CSSDT15.817.02.04A. Authors from IREC belong to the M-2E (Electronic Materials for Energy) Consolidated Research Group and the XaR-MAE Network of Excellence on Materials for Energy of the“Generalitat de Catalunya”. M. Guc thanks Generalitat de Catalunya for the TECNIO springþ fellowship (TECSPR18-1-0048).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical-Based Thickness Measurement of MoO3 Nanosheets

  • Puebla, Sergio
  • Mariscal, A.
  • Serna, Rosalía
  • Munuera, C.
  • Castellanos-Gómez, Andrés
10 pags., 5 figs. -- This article belongs to the Special Issue 2D Materials and Heterostructures with Application in Optoelectronics, Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO3 flakes on SiO2/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of 3 nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with +-2 nm of uncertainty., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n◦ 755655, ERC-StG 2017 project 2D-TOPSENSE), the European Commission, under the Graphene Flagship (Core 3, grant number 881603), the Spanish Ministry of Economy, Industry and Competitiveness through the grant MAT2017-87134-C2-2-R and partially funded by the Spanish Ministerio de Ciencia e Innovación through grant RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). SP acknowledges the fellowship PRE2018-084818.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Building the photonic blocks of lightwave circuits by pulsed laser deposition

  • Gómez-Rodríguez, Pilar
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
International School on Quantum Electronics "Laser Physics and Applications", 21-24 September 2020 as a virtual forum. -- Conferencia invitada, The successful migration from electronic to photonic devices relies on the fabrication and integration of multiple building photonic blocks, including active devices, such as lasers and amplifiers, on a common planar substrate to reduce their size, cost and power consumption, while maintaining their compatibility with current fiber technology. The excellent optical properties and ease of preparation of glasses makes them promising materials to achieve that goal at a reasonable cost. Yet, their application requires first the fabrication of high quality thin films a few microns thick with good light emission performance. Pulsed laser deposition is very attractive for this purpose since it allows the synthesis of metastable phases of complex oxides in thin film configuration. First we will show that a fine tuning of the deposition parameters allows the synthesis of good quality transparent heavy metal oxide film glasses with unconventional structure, a composition well outside the bulk glass formation region and high refractive index that allows the building of waveguides with high light confinement. Then, we will present an overview of the capability of alternate-PLD for the nanostructuration of film glasses through the incorporation of rare earth (RE) ions and metal nanoparticles as functionalizing elements to achieve active light emitting components. The optimization of the films is achieved by controlling the dopant concentration and by using a pre-designed in-depth distribution, which is critical to enhance their photoluminescent response. This opens a broad range of material function and design possibilities, since the optical and photoluminescent properties of the produced nanostructures can be tailored at the nanoscale., Work partially funded by the Spanish Ministry for Science and Innovation and CSIC (Projects RTI2018-096498-B-I00 and PIE-202050E195).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of annealing temperature on Cu2ZnGeSe4 thin films and solar cells grown on transparent substrates

  • Ruiz-Perona, Andrea
  • Sánchez, Yudania
  • Guc, Maxim
  • Kodalle, Tim
  • Placidi, Marcel
  • Merino, J.M.
  • Cabello, Fátima
  • Garcia-Pardo, Marina
  • León, Máximo
  • Caballero, Raquel
9 pags., 7 figs., 2 tabs., Semi-transparent solar cells are the next step for photovoltaics into our daily life. Over the last years, kesterite-type material has attracted a special attention to be used as an absorber in thin-film solar cells because of its low toxicity and earth abundant constituents. Here, Cu2ZnGeSe4 (CZGSe) thin films are grown by co-evaporation and subsequent annealing at a maximum temperature of 480 ◦C or 525 ◦C onto Mo/V2O5/FTO/glass stacks. The goal of this work is to investigate the influence of the annealing temperature on the composition, morphology, vibrational properties, and transmittance of CZGSe layers, the formation of secondary phases, and distribution of elements within the absorber layer as well as on the optoelectronic properties of the corresponding solar cell devices. Raising the annealing temperature to 525 ◦C leads to a more uniform distribution of Cu, Zn, Ge and Se throughout the absorber layer, a reduction of the presence of the GeSe2 secondary phase, which is mainly detected at 480 ◦C, a larger grain size and the formation of a thicker MoSe2 layer at the CZGSe/back contact interface. The strategy of increasing the annealing temperature allows for improved J–V characteristics and higher spectral response resulting in an enhanced device performance of 5.3% compared to 4.2% when using 525 ◦C and 480 ◦C, respectively. Both absorber layers present an optical band gap energy of 1.47 eV. Furthermore, higher annealing temperature has beneficial effect to the CZGSe-based devices without losses in total transmitted light because of the higher diffuse transmittance. This work shows first promising semi-transparent CZGSe-based solar cells possibly open up new routes of applications., This work was supported by Spanish Ministry of Science, Innovation and Universities Project WINCOST (ENE2016-80788-C5-2-R), Project RTI (2018-096498-B-I00, AEI/MICINN/ERDF) and European Project INFINITE CELL (H2020-MSCA-RISE-2017-777968). Authors from IREC belong to the SEMS (Solar EnergyMaterials and Systems) Consolidated Research Group of the ‘Generalitat de Catalunya’ (Ref 2017 SGR 862).MG and MP acknowledge the financial support from Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva (IJC2018-038199-I) and Ramón y Cajal (RYC-2017-23758) Fellowships respectively. MGP also acknowledges funding from AEI/MICINN (PTA2019-016763-I). The authors acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and European Union (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Femtosecond laser induced thermophoretic writing of waveguides in silicate glass

  • Macías-Montero, M.
  • Muñoz, Francisco
  • Sotillo, Belén
  • Hoyo, J. del
  • Ariza, Rocío
  • Fernández, Paloma
  • Siegel, Jan
  • Solís Céspedes, Javier
12 pags., 5 figs., 1 tab., Here in, the fs-laser induced thermophoretic writing of microstructures in ad-hoc compositionally designed silicate glasses and their application as infrared optical waveguides is reported. The glass modifcation mechanism mimics the elemental thermal difusion occurring in basaltic liquids at the Earth’s mantle, but in a much shorter time scale (108 times faster) and over a well-defned micrometric volume. The precise addition of BaO, Na2O and K2O to the silicate glass enables the creation of positive refractive index contrast upon fs-laser irradiation. The infuence of the focal volume and the induced temperature gradient is thoroughly analyzed, leading to a variety of structures with refractive index contrasts as high as 2.5 × ­10–2. Two independent methods, namely near feld measurements and electronic polarizability analysis, confrm the magnitude of the refractive index on the modifed regions. Additionally, the functionality of the microstructures as waveguides is further optimized by lowering their propagation losses, enabling their implementation in a wide range of photonic devices, Tis work was fnancially supported by the Spanish Research Agency (MCIU/AEI/Spain) and the European Regional Development Fund (ERDF) through Grants TEC2017-82464-R, MAT2017-87035-C2-1-P, and RTI2018-096498-B-I00. M. Macias-Montero acknowledges the postdoctoral Juan de la Cierva Incorporación grant (IJCI-2017-33317) of the Spanish Ministry of Research and Innovation. B.Sotillo and J. del Hoyo acknowledge the fnancial support from Comunidad de Madrid (Ayudas del Programa de Atracción de Talento, 2017-T2/ IND-5465 and 2019-T2/IND-12950). R. Ariza acknowledges the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition effects during femtosecond laser induced element redistribution in Ba- and La-migration based laser written waveguides

  • Macías-Montero, M.
  • Moreno-Zarate, Pedro
  • Muñoz, Francisco
  • Sotillo, Belén
  • Garcia-Pardo, Marina
  • Serna, Rosalía
  • Fernández, Paloma
  • Solís Céspedes, Javier
15 pags., 5 figs., 4 tabs. -- This article belongs to the Special Issue Advanced Pulse Laser Machining Technology, Fs-laser induced element redistribution (FLIER) has been a subject of intensive research in recent years. Its application to various types of glasses has already resulted in the production of efficient optical waveguides, tappers, amplifiers and lasers. Most of the work reported on FLIER-based waveguides refers to structures produced by the cross-migration of alkali (Na, K) and lanthanides (mostly La). The latter elements act as refractive index carrying elements. Herein, we report the production of Ba-based, FLIER-waveguides in phosphate glass with an index contrast > 10−2 . Phosphate glasses modified with the same amount of Na2O and K2O, and variable amounts of BaO and/or La2O3 were used to produce the FLIER-waveguides with Ba and or La acting as index carriers. Ba-only modified glasses show a waveguide writing threshold and light guiding performance comparable to that of La-based structures. However, mixed Ba-La glasses show a much higher element migration threshold, and much smaller compositionally modified regions. This behavior is consistent with a competition effect in the cross-migration of both elements (Ba and La) against the alkalis. Such an effect can be applied to inhibit undesired element redistribution effects in fs-laser processing applications in multicomponent glasses., This research was funded through grant numbers TEC2017-82464-R, MAT2017-87035-C2-1-P, RTI2018-096498-B-I00 (MCIU/AEI/FEDER, EU), and CSIC PIE-201850E057 and PIE-202050E195 projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward white light emission from plasmonic-luminescent hybrid nanostructures

  • Gómez-Rodríguez, Pilar
  • Soria, Esther
  • Jin, Yu
  • Caño, Andrés
  • Llorente, Irene
  • Cuadrado, Alexander
  • Mariscal, A.
  • Petford-Long, Amanda K.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
13 pags., 6 figs., 2 tabs., We study the light emission of plasmonic-luminescent hybrid nanostructures consisting of Ag nanoparticles (NPs) embedded in europium oxide (EuOX). The Ag NPs present a bidimensional organization in the nanostructures and they optically behave as oblate spheroids. The photoluminescence (PL) spectral response of the nanostructures evolves from a narrow red emission characteristic of Eu3+ ions in absence of Ag NPs to a broad blue-green emission band associated with Eu2+ ions when the layer of Ag NPs is present. This behavior is not related to a change in the Eu2+/Eu3+ ratio, which is verified by compositional analysis. Instead, a detailed investigation of the PL emission of the nanostructures suggests that the coupling of the Ag NPs to the Eu2+ ions present in the EuOX layer, which manifests itself in an efficient sensitization of these ions, enhances their broad visible emission. In particular, the longitudinal mode of the Ag NPs surface plasmon is considered to be responsible for the efficient energy transfer for the non-normal incidence excitation PL configuration used. Finally, the use of a capping amorphous Al2O3 layer allows improving the robustness of hybrid nanostructures and further enhances their PL emission. These findings provide a new path to actively control the selective excitation of Eu2+ and Eu3+ ions via a controlled coupling with the surface plasmon resonance modes of the Ag NPs and points to these nanostructures as promising building blocks for the development of integrable white light sources., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants RTI 2018-096498-B-I00 and PID2019-105918GB-I00, the CSIC (LINKA2044 I-Link+ and PIE-202050E195 projects) and the Autonomous Community of Madrid (UV4VIR.COV20-01244-CM project). The work of P. Gomez-Rodriguez was supported by the Autonomous Community of Madrid and the European Social Fund (Contract E-28-2019-0767805). A. K. Petford-Long and Yu Jin were supported by the National Science Foundation (Collaborative Grant #DMR 1600837), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical properties of differing nanolayered structures of divalent europium doped barium fluoride thin films synthesized by pulsed laser deposition

  • Bond, C. W.
  • Jin, Y.
  • Gómez-Rodríguez, Pilar
  • Nieto-Pinero, Eva
  • Leonard, R.L.
  • Gonzalo de los Reyes, J.
  • Serna, Rosalía
  • Petford-Long, Amanda K.
  • Johnson, J.A.
7 pags., 13 figs., 1 tab., Optically-active thin films are employed in a variety of applications, such as LEDs and photovoltaics, due to their ability to act as up- or down-photon energy converters. Their performance depends critically on their composition and structure; thus, the use of novel synthesis techniques that allow for their control at the nanoscale level can result in improved efficiency and practicality. Layered thin films consisting of Eu2+- doped BaF2 nanocrystalline layers separated by amorphous Al2O3 were synthesized via sequential pulsed laser deposition using three separate targets for the different components; this synthesis technique provides precise control of layer thickness at the nanoscale along with dopant distribution within the film. Cross-sectional transmission electron microscopy analysis verified the desired nano-layering. Post-deposition heat treatments in a nitrogen atmosphere resulted in samples exhibiting steady emission with a broad peak ranging from 400 to 600 nm and a shoulder at 410 nm. The CIE 1931 chromaticity coordinates are x = 0.26–0.29 and y = 0.32–0.35 and vary as a function of the sample configuration. Because the chromaticity coordinates are close to those of a pure white light (x = 0.33,y = 0.33), these films demonstrate advantageous properties for applications with UV-pumped white light LEDs., This research was supported by the National Science Foundation under grant # DMR 1600783 and # DMR 1600837 and the Spanish Research Council under grants LINKA20044 and RTI2018-096498-B- 100 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward white light emission from plasmonic- luminescent hybrid nanostructures

  • Gómez-Rodríguez, Pilar
  • Soria, Esther
  • Jin, Yu
  • Caño, Andrés
  • Llorente, Irene
  • Cuadrado, Alexander
  • Mariscal, A.
  • Petford-Long, Amanda K.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
13 pags., 6 figs., 2 tabs., We study the light emission of plasmonic- luminescent hybrid nanostructures consisting of Ag nanoparticles (NPs) embedded in europium oxide (EuOx). The Ag NPs present a bidimensional organization in the nanostructures and they optically behave as oblate spheroids. The photoluminescence (PL) spectral response of the nanostructures evolves from a narrow red emission characteristic of Eu3+ ions in absence of Ag NPs to a broad blue-green emission band associated with Eu2+ ions when the layer of Ag NPs is present. This behavior is not related to a change in the Eu2+/Eu3+ ratio, which is verified by compositional analysis. Instead, a detailed investigation of the PL emission of the nanostructures suggests that the coupling of the Ag NPs to the Eu2+ ions present in the EuOx layer, which manifests itself in an ef!cient sensitization of these ions, enhances their broad visible emission. In particular, the longitudinal mode of the Ag NPs surface plasmon is considered to be responsible for the ef!cient energy transfer for the non-normal incidence excitation PL con!guration used. Finally, the use of a capping amor- phous Al2O3 layer allows improving the robustness of hybrid nanostructures and further enhances their PL emission. These !ndings provide a new path to actively control the selective excitation of Eu2+ and Eu3+ ions via a controlled coupling with the surface plasmon resonance modes of the Ag NPs and points to these nanostructures as promising building blocks for the development of inte- grable white light sources., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants RTI 2018-096498-B-I00 and PID2019-105918GB-I00, the CSIC (LINKA2044 I-Link+ and PIE-202050E195 projects) and the Autonomous Community of Madrid (UV4VIR.COV20-01244-CM project). The work of P. Gomez-Rodriguez was supported by the Autonomous Community of Madrid and the European Social Fund (Contract E-28-2019-0767805). A. K. Petford-Long and Yu Jin were supported by the National Science Foundation (Collaborative Grant #DMR 1600837).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanosecond Laser Switching of Phase-Change Random Metasurfaces with Tunable ON-State

  • Álvarez-Alegría, Miguel
  • Siegel, Jan
  • Garcia-Pardo, Marina
  • Cabello, Fátima
  • Toudert, Johann
  • Haro-Poniatowski, E.
  • Serna, Rosalía
11 pags., 5 figs., Random metasurfaces based on disordered phase-change nanostructures with broadband ultraviolet–visible plasmonic properties are fantastic platforms for the development of active photonic components due to their versatility. Here optical ON–OFF switching upon nanosecond laser irradiation of Bi-based random metasurfaces is demonstrated profiting from the solid–liquid phase transition of the Bi nanostructures. The fast switching time is revealed by using single-pulse real-time reflectivity measurements with sub-nanosecond temporal resolution. A sudden reflectivity decrease is observed upon laser excitation, triggered by heating and melting of the embedded Bi nanostructures of the metasurface. This transient state of low reflectivity remains constant until the Bi solidifies upon cooling, recovering the initial reflectivity level, and showing full reversibility of the process. The duration of this ON-state, defined by characteristic low reflectivity values, can be tuned from 10 to >700 ns by adjusting the nanostructure components of the metasurface and laser fluence. Furthermore, it is demonstrated that this ON–OFF switch process is repeatable for more than 100 000 times without observable degradation of the metasurface. These results pave the way for the development of a new generation of fast, robust, and integrable nanophotonic switching devices., This research was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants TEC2017-82464-R and RTI 2018-096498-B-I00, and the CSIC PIE-201850E057 and PIE-202050E195 projects. M.G.-P. acknowledges funding from PTA2019-016763-I (AEI/MICINN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transparent high conductive Titanium oxynitride nanofilms obtained by nucleation control for sustainable optolectronics

  • Enríquez Pérez, Esther
  • Mariscal, A.
  • Serna, Rosalía
  • Fernández Lozano, José Francisco
9 pags., 6 figs., 3 tabs., Transparent conducting thin films have attracted a lot of interest in last decades because they have become essential electrodes for optoelectronics applications. Indium tin oxide (ITO) is the transparent conductor par excellence with 80% transmittance in the visible range and a resistivity of 10 Ω·cm. Unfortunately, ITO is toxic, brittle and very expensive due to the Indium scarcity in the earth's crust. For this reason, sustainable alternatives are being sought. Titanium oxynitrides are a very interesting alternative, titanium is abundant and its oxynitrides show remarkable mechanical, electrical and optical properties that can be tailored by modifying the N/O ratio. However, achieving the balance between transparency and conductivity to design a suitable electrode is a challenging milestone. In this work we prepared high quality TiON nanofilms by PLD (pulsed laser deposition) in vacuum, tuning the transparency and conducting properties by varying the deposition laser energy to control the N/O ratio. The absence of gases flux achieves defect-free films with transparency up to 50% and similar conductivity to ITO (1.8·10 S/cm). These results open a new line of research for the development of sustainable transparent conducting electrodes based on dense and planar TION films, very useful for electronic and optical devices, solar cells or photonics., The authors express their thanks for their financial support of the Spanish Research Agency (AEI, Ministry of Research and Innovation) (project MAT2017-86450-C4-1-R) and the European Regional Devel- opment Fund (ERDF) (grant RTI 2018-096498-B-I00.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Light Absorption in All-Polymer Biomimetic Photonic Structures by Near-Zero-Index Organic Matter

  • Castillo, Miguel A.
  • Estévez-Varela, C.
  • Wardley, William P.
  • Serna, Rosalía
  • Pastoriza-Santos, Isabel
  • Núñez-Sánchez, S.
  • López-García, Martín
11 pags., 6 figs., Natural photosynthetic photonic nanostructures can show sophisticated light–matter interactions including enhanced light absorption by slow light even for highly pigmented systems. Beyond fundamental biology aspects, these natural nanostructures are very attractive as blueprints for advanced photonic devices. But the soft-matter biomimetic implementations of such nanostructures is challenging due to the low refractive index contrast of most organic photonic structures. Excitonic organic materials with near-zero index (NZI) optical properties allow overcoming these bottlenecks. Here, it is demonstrated that the combination of NZI thin films with photonic multilayers like the ones found in nature enables broadband tunable strong reflectance as well as slow light absorption enhancement and tailored photoluminescence properties in the full VIS spectrum. Moreover, it is shown that this complex optical response is tunable, paving the way toward the development of active devices based on all-polymer and near-zero index materials photonic structures., The work by M.C.A., W.P.W., and M.L.-G. was supported by the “Towards Biomimetic Photosynthetic Photonics” project (POCI-01-0145-FEDER- 031739) co-funded by FCT and COMPETE2020. C.E.-V., S.N.-S, and I.P.-S. acknowledge financial support from MCIN/ AEI/10.13039/501100011033 (Grant No. PID2019-108954RB-I00) and the Xunta de Galicia/FEDER (grant GRC ED431C 2020/09). R.S. acknowledges Grants RTI 2018-096498-B-I00 and PID2021-123190OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF a way of making Europe.”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pulsed laser deposition and structural evolution of BaF2 nanolayers in Eu-doped BaF2/Al2O3 layered optical nanocomposite thin films

  • Jin, Yu
  • Bond, C.W.
  • Gómez-Rodríguez, Pilar
  • Nieto-Pinero, Eva
  • Leonard, R.L.
  • Gosztola, David J.
  • Johnson, Jacqueline A.
  • Gonzalo de los Reyes, J.
  • Serna, Rosalía
  • Petford-Long, Amanda K.
13 pags., 8 figs., 2 tabs., We have developed a pulsed laser deposition (PLD) geometry for the growth of uniform BaF2 nanoscale thin films, through control of the deposition conditions. Our goal is to use the BaF2 layers with controllable structure as component layers in layered optical nanocomposites. The structure of the BaF2 nanolayer evolves as a function of the layer thickness: BaF2 grows via a layer-by-layer growth mode on Al2O3; the layers are amorphous for a thickness < 3 nm, and then become nanocrystalline as the layer thickness increases. The BaF2 nanocrystals have an FCC crystal structure with a weak <111> texture that becomes stronger for thicker films. We then demon- strate that our BaF2 films can be introduced into layered Al2O3/BaF2/EuOx nanocomposite films, which allows for control of the relative position of the Eu ions and the BaF2 layer. Cross-section samples of the multilayered films show interfacial intermixing between the layers, which is related to implantation during the PLD process. This intermixing enables the incorporation of Eu ions into BaF2 layers and form a thin Eu-doped BaF2 nanolayer at the interface. The layered nanocomposite films show photoluminescence (PL) emission from Eu3+ ions, and the PL intensity changes can be correlated with the crystallinity and crystal size changes in the BaF2 layer. Our results provide guidance for achieving thin film nanocomposite materials with controllable structure and pho- toluminescence behavior for light emitting diodes, photovoltaics and other optical applications., This research was supported by the National Science Foundation grants #DMR 1600783 and #DMR 1600837. Use of the Center for Nanoscale Materials, an Office of Science user facility, was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. This research was also funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grant RTI 2018-096498-B-I00, and the CSIC (I-Link+ (LINKA2044) collaborative project and PIE-202050E195 project). The work of P.G.-R. and E.N.-P was supported by the Autonomous Com- munity of Madrid and the European Social Fund (contracts E-28-2019- 0767805 and E-28-018-309435 respectively).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality single-crystalline epitaxial regrowth on pulsed laser melting of Ti implanted GaAs

  • Algaidy, S.
  • Caudevilla, D.
  • Perez-Zenteno, F.
  • García-Hernansanz, R.
  • García-Hemme, E.
  • Olea, J.
  • San Andrés, E.
  • Duarte-Cano, S.
  • Siegel, Jan
  • Gonzalo de los Reyes, J.
  • Pastor, D.
  • Prado, A. del
8 pags., 8 figs., We present a detailed investigation on the formation of supersaturated GaAs using Ti+ implantation followed by nanosecond Pulsed Laser Melting (PLM). We have synthesized high-crystal quality supersaturated GaAs layers with concentrations of Ti above the insulator to metal transition (Mott limit). The Ti-implanted concentration depth profiles after PLM obtained by Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) show a redistribution of Ti impurities within the first hundred nanometers and superficial concentration up to 1 × 1021 cm−3. Raman spectroscopy of these Ti supersaturated, and regrown GaAs samples shows a sharp crystalline peak and tensile strain due to the Ti lattice incorporation. Scanning Transmission Electron Microscopy (STEM) and high-resolution Transmission Electron Microscopy (TEM) images show a good GaAs crystallinity after the PLM process. Energy-Dispersive X-ray Spectroscopy (EDS) reveals an enhanced Ti signal inside bubble-like structures and an appearance of interface oxide layer with all processed samples., Authors would like to acknowledge C.A.I. de Tecnicas Físicas of the Universidad Complutense de Madrid for ion implantation, and the technical. This work was partially supported by the Project MADRIDPV2 (Grant No. P20138/EMT-4308) funded by the Comunidad Autonoma de Madrid with the support of FEDER funds, by the Spanish MINECO (Ministerio de Economía y Competitividad) under grants PID2020-116508RB-I00, PID2020-117498RB-I00 and RTI2018-096498-B-I00. One of the authors (S. Algaidy) would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. D.Caudevilla would also like to acknowledge a grant (PRE2018-083798), financed by MICINN and European Social Fund. F. Perez-Zenteno would like to acknowledge financial support Mexico grant program CONACyT under grant 786327. The authors would like to also acknowledge the services of CAI de Espectroscopia of UCM, (INA-LMA) de Universidad de Zaragoza and C.A.C.T.I de Universidad de Vigo for Raman, FIB-SEM and SIMS, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon oxynitride nanofilms prepared by PLD with controlled Eu-local concentration for broadband white light emitters

  • Camps, I.
  • Mariscal, A.
  • Serna, Rosalía
5 pags., 5 figs., 1 tab., We report the successful preparation and characterization of active silicon oxynitride thin films with controlled europium (Eu) doping by alternated pulsed laser deposition. The successful Eu doping with a nanostructured dopant distribution, as well as the stoichiometry of the oxynitride film, have been determined by ion beam analysis (RBS). The oxidation state of the incorporated Eu ions has been determined by in-depth x-ray photoelectron spectroscopy (XPS) and it is shown that the Eu ions are in the 2+ state, in contrast to the usual results found in oxide matrices for which the 3+ oxidation state prevails. The Eu-doped films show an intense broadband emission (FWHM >210 nm) associated to the optical transition fd → S of the Eu ions within the amorphous matrix. As expected, the intensity of the emission band increases as the Eu concentration increases, and it is remarkable that the emission shifts towards longer wavelengths. In terms of the chromatic coordinates (CIE) this implies a color tuning from a bluish to orange that enables color tunable emission, and potential white like emission by combining layers with different Eu ions concentration. Therefore, the developed oxynitride films with controlled Eu ions concentration achieved by PLD are promising for the development of color -tailored LED's., This work was partially funded by Spanish grants MINECO/FEDER TEC2015-69916-C2-1-R, MICINN/FEDER RTI2018-096498-B-I00 and PID2021-123190OB-I00, and by the CSIC (Spain) grants PIE202050E195 and AEPP2021-128. I.C. acknowledges the financial support through CSIC scholarship JAE-Pre2011 00578. A.M. acknowledges the financial support through FPI grant BES-2013-062593