Pasar al contenido principal

FOTODETECTORES PARA INFRARROJO CERCANO Y MEDIO BASADOS EN SEMICONDUCTORES HIPERDOPADOS COMPATIBLES CON TECNOLOGIA CMOS

PRE2018-083798

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality single-crystalline epitaxial regrowth on pulsed laser melting of Ti implanted GaAs

  • Algaidy, S.
  • Caudevilla, D.
  • Perez-Zenteno, F.
  • García-Hernansanz, R.
  • García-Hemme, E.
  • Olea, J.
  • San Andrés, E.
  • Duarte-Cano, S.
  • Siegel, Jan
  • Gonzalo de los Reyes, J.
  • Pastor, D.
  • Prado, A. del
8 pags., 8 figs., We present a detailed investigation on the formation of supersaturated GaAs using Ti+ implantation followed by nanosecond Pulsed Laser Melting (PLM). We have synthesized high-crystal quality supersaturated GaAs layers with concentrations of Ti above the insulator to metal transition (Mott limit). The Ti-implanted concentration depth profiles after PLM obtained by Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) show a redistribution of Ti impurities within the first hundred nanometers and superficial concentration up to 1 × 1021 cm−3. Raman spectroscopy of these Ti supersaturated, and regrown GaAs samples shows a sharp crystalline peak and tensile strain due to the Ti lattice incorporation. Scanning Transmission Electron Microscopy (STEM) and high-resolution Transmission Electron Microscopy (TEM) images show a good GaAs crystallinity after the PLM process. Energy-Dispersive X-ray Spectroscopy (EDS) reveals an enhanced Ti signal inside bubble-like structures and an appearance of interface oxide layer with all processed samples., Authors would like to acknowledge C.A.I. de Tecnicas Físicas of the Universidad Complutense de Madrid for ion implantation, and the technical. This work was partially supported by the Project MADRIDPV2 (Grant No. P20138/EMT-4308) funded by the Comunidad Autonoma de Madrid with the support of FEDER funds, by the Spanish MINECO (Ministerio de Economía y Competitividad) under grants PID2020-116508RB-I00, PID2020-117498RB-I00 and RTI2018-096498-B-I00. One of the authors (S. Algaidy) would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. D.Caudevilla would also like to acknowledge a grant (PRE2018-083798), financed by MICINN and European Social Fund. F. Perez-Zenteno would like to acknowledge financial support Mexico grant program CONACyT under grant 786327. The authors would like to also acknowledge the services of CAI de Espectroscopia of UCM, (INA-LMA) de Universidad de Zaragoza and C.A.C.T.I de Universidad de Vigo for Raman, FIB-SEM and SIMS, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of GaP:Ti photovoltaic devices

  • Olea, J.
  • Gonzalo de los Reyes, J.
  • Siegel, Jan
  • Braña, A. F.
  • Godoy-Pérez, G.
  • Benítez-Fernández, R.
  • Caudevilla, D.
  • Algaidy, S.
  • Pérez-Zenteno, F.
  • Duarte-Cano, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Pastor, D.
  • San-Andrés, E.
  • Mártil, I.
6 pages, 6 figures, 1 table, Supersaturated GaP is of interest for the photovoltaic field since optical transitions at energies below the bandgap (2.26 eV) could enhance the overall device efficiency up to theoretically 60%. We have previously demonstrated that Ti supersaturated GaP can be obtained by means of ion implantation and pulsed-laser melting with high structural quality and measured its below-bandgap photoconductivity. In this work we report the first results of a GaP:Ti based photovoltaic device. We have fabricated and measured photovoltaic devices with a GaP:Ti absorber layer showing enhanced external quantum efficiency at wavelengths above 550 nm. Also, we have measured the absorption coefficient (around 104 cm−1) and refractive index of this absorber layer. Finally, current-voltage curves in darkness were measured and analyzed using a two-diodes model, showing improvable characteristics. Ideas to enhance the properties of the devices are suggested., Authors would like to acknowledge the “CAI de Tecnicas Físicas” of the Universidad Complutense de Madrid for the fabrication processes and “Laboratorio de Caracterizaci´ on de Superficies” of CENIM for XPS measurements. This work was partially supported by the Project MADRID-PV2 (P2018/EMT-4308) funded by the Regional Government of Madrid with the support from FEDER Funds, by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants TEC2017-84378-R, PID2020-116508RB-I00 and PID2020-117498RB-I00. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B–C21/C22) funded by the Recovery and Resilience Facility of the EU and ALPHOMENA (PID2021-123190OB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF). D. Caudevilla would also acknowledge the grant PRE2018-083798, financed by MICINN and European Social Fund. F. Perez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for predoctoral contract from UCM (call CT58/21-CT59/ 21). The authors would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. G. Godoy-Perez and R. Benítez-Fernandez acknowledges the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. A. F. Bra˜ na gratefully acknowledges the financial support from rom Grant No. TED2021- 129624B–C43 funded by the Spanish International Research Agency MCIN/AEI/10.13039/501100011033 and by “NextGenerationEU”/ PRTR., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Inversion charge study in TMO hole-selective contact based solar cells

  • García Hernansanz, Rodrigo
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hemme, Eric
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
  • Ros, Eloy
  • Puigdollers, Joaquim
  • Ortega, Pablo
  • Voz, Cristobal
In this article, we study the effect of the inversion charge ( Q _inv ) in a solar cell based on the hole-selective characteristic of substoichiometric molybdenum oxide (MoO_x ) and vanadium oxide (VO_x ) deposited directly on n-type silicon. We measure the capacitance–voltage ( C – V ) curves of the solar cells at different frequencies and explain the results taking into account the variation of the space charge and the existence of Q_inv in the c-Si inverted region. The high-frequency capacitance measurements follow the Schottky metal–semiconductor theory, pointing to a low inversion charge influence in these measurements. However, for frequencies lower than 20 kHz, an increase in the capacitance is observed, which we relate to the contribution of the inversion charge. In addition, applying the metal–semiconductor theory to the high-frequency measurements, we have obtained the built-in voltage potential and show new evidence about the nature of the conduction process in this structure. This article provides a better understanding of the transition metal oxide/n-type crystalline silicon heterocontact.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electronic transport properties of Ti-supersaturated Si processed by rapid thermal annealing or pulsed-laser melting

  • Olea Ariza, Javier
  • González Díaz, Germán
  • Pastor Pastor, David
  • García Hemme, Eric
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
In the scope of supersaturated semiconductors for infrared detectors, we implanted Si samples with Ti at high doses and processed them by rapid thermal annealing (RTA) to recover the crystal quality. Also, for comparative purposes, some samples were processed by pulsed-laser melting. We measured the electronic transport properties at variable temperatures and analyzed the results. The results indicate that, for RTA samples, surface layers with a high Ti concentration have negligible conductivity due to defects. In contrast, the implantation tail region has measurable conductivity due to very high electron mobility. This region shows the activation of a very shallow donor and a deep donor level. While deep levels have been previously reported for Ti in Si, such a shallow level has never been measured, and we suggest that it originates from Ti-Si complexes. Finally, a decoupling effect between the implanted layer and the substrate seems to be present, and a bilayer model is applied to fit the measured properties. The fitted parameters follow the Meyer–Neldel rule. The role of the implantation tails in Si supersaturated with Ti is revealed in this work.