Pasar al contenido principal

ENSAMBLAJE LASER DE METASUPERFICIES Y NANOESTRUCTURAS FOTONICAS INTEGRABLES

PID2021-123190OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Light Absorption in All-Polymer Biomimetic Photonic Structures by Near-Zero-Index Organic Matter

  • Castillo, Miguel A.
  • Estévez-Varela, C.
  • Wardley, William P.
  • Serna, Rosalía
  • Pastoriza-Santos, Isabel
  • Núñez-Sánchez, S.
  • López-García, Martín
11 pags., 6 figs., Natural photosynthetic photonic nanostructures can show sophisticated light–matter interactions including enhanced light absorption by slow light even for highly pigmented systems. Beyond fundamental biology aspects, these natural nanostructures are very attractive as blueprints for advanced photonic devices. But the soft-matter biomimetic implementations of such nanostructures is challenging due to the low refractive index contrast of most organic photonic structures. Excitonic organic materials with near-zero index (NZI) optical properties allow overcoming these bottlenecks. Here, it is demonstrated that the combination of NZI thin films with photonic multilayers like the ones found in nature enables broadband tunable strong reflectance as well as slow light absorption enhancement and tailored photoluminescence properties in the full VIS spectrum. Moreover, it is shown that this complex optical response is tunable, paving the way toward the development of active devices based on all-polymer and near-zero index materials photonic structures., The work by M.C.A., W.P.W., and M.L.-G. was supported by the “Towards Biomimetic Photosynthetic Photonics” project (POCI-01-0145-FEDER- 031739) co-funded by FCT and COMPETE2020. C.E.-V., S.N.-S, and I.P.-S. acknowledge financial support from MCIN/ AEI/10.13039/501100011033 (Grant No. PID2019-108954RB-I00) and the Xunta de Galicia/FEDER (grant GRC ED431C 2020/09). R.S. acknowledges Grants RTI 2018-096498-B-I00 and PID2021-123190OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF a way of making Europe.”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-dependent anisotropic refractive index in β-Ga2O3: application in interferometric thermometers

  • Carrasco, Daniel
  • Nieto-Pinero, Eva
  • Alonso-Orts, Manuel
  • Serna, Rosalía
  • San Juan, José M.
  • Nó, María L.
  • Jesenovec, Jani
  • McCloy, John S.
  • Nogales, Emilio
  • Méndez, Bianchi
An accurate knowledge of the optical properties of β-Ga2O3 is key to developing the full potential of this oxide for photonics applications. In particular, the dependence of these properties on temperature is still being studied. Optical micro- and nanocavities are promising for a wide range of applications. They can be created within microwires and nanowires via distributed Bragg reflectors (DBR), i.e., periodic patterns of the refractive index in dielectric materials, acting as tunable mirrors. In this work, the effect of temperature on the anisotropic refractive index of β-Ga2O3 n(λ,T) was analyzed with ellipsometry in a bulk crystal, and temperature-dependent dispersion relations were obtained, with them being fitted to Sellmeier formalism in the visible range. Micro-photoluminescence (μ-PL) spectroscopy of microcavities that developed within Cr-doped β-Ga2O3 nanowires shows the characteristic thermal shift of red–infrared Fabry–Perot optical resonances when excited with different laser powers. The origin of this shift is mainly related to the variation in the temperature of the refractive index. A comparison of these two experimental results was performed by finite-difference time-domain (FDTD) simulations, considering the exact morphology of the wires and the temperature-dependent, anisotropic refractive index. The shifts caused by temperature variations observed by μ-PL are similar, though slightly larger than those obtained with FDTD when implementing the n(λ,T) obtained with ellipsometry. The thermo-optic coefficient was calculated., This work was supported by MICINN projects (RTI2018-097195-B-I00, RTI2018-096918-B-C41, PID2021-122562NB-I00 and PID2021-123190OB-I00/AEI/10.13039/501100011033/FEDER, UE). The authors acknowledge the financial support of the excellence research network RED2018-102609-T by MINECO. The authors acknowledge the support from the Air Force Office of Scientific Research under Award No. FA8655-20-1-7013 (Program Manager: Ali Sayir). M.A.-O. acknowledges financial support from MICINN (FPU contract No. FPU15/01982) and thanks the Central Research Development Fund (CRDF) of the University of Bremen for funding (ZF04/2021). J.S.M. and J.J. were supported by the Air Force Office of Scientific Research under award number FA9550–21–1–0507, monitored by Dr. Ali Sayir. Any opinions, finding, and conclusions or recommendations expressed in this material are those of the author and do not necessarily reflect the views of the United States Air Force., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature behaviour of mixed-cation mixed-halide perovskite solar cells. Analysis of recombination mechanisms and ion migration

  • López-González, Mari Carmen
  • del Pozo, Gonzalo
  • Arredondo, Belén
  • Delgado, Silvia
  • Martín-Martín, Diego
  • García-Pardo, Marina
  • Romero, Beatriz
11 pags., 13 figs., In our study, we show that compositional engineering of the “A” site cation of ABX3 perovskite structure formed by a mix of organic and inorganic cations is an effective route to improve the thermal stability of perovskite solar cells (PSCs). In this work, mixed-cation mixed-halide PSCs have been fabricated and characterized with temperature, from 253 up to 333 K. The active layer based on CsRbFAMAPb(IBr)3 results in a more stable device compared to standard MAPbI3 devices. Electrical characterization reveals a decrease of the solar cell parameters with temperature. Using Impedance Spectroscopy (IS) characterization, we have estimated an activation energy for the halide ion migration of 0.63 ± 0.08 eV, an ion diffusion coefficient of 10−14 cm2 s−1, and a defect density of 7.27·1015 cm−3. To our knowledge, this is the first time that these parameters have been calculated in CsRbFAMAPb(IBr)3 based devices, resulting in improved values compared to MAPbI3 devices. The worsening of device performance for temperatures above 300 K is attributed to a decrease of the spiro-OMeTAD conductivity and the degradation of the perovskite/spiro-OMeTAD interface. It is shown that for low temperatures (from 253 to 323 K), Shockley-Red-Hall (SRH) recombination in the bulk governs, while for temperatures above 323 K the increase in surface recombination becomes dominant due to the presence of non-selective contacts. Numerical simulations using SILVACO ATLAS corroborate the role of SRH in the perovskite active layer for low and medium temperatures, and the crucial influence of spiro-OMeTAD transport properties in the device performance parameters., This research was funded by Community of Madrid under the SINFOTON2-CM Research Program (S2018/NMT-4326-SINFOTON2-CM), and in the framework of the Multiannual Agreement with the Rey Juan Carlos University in line of action 1, “Encouragement of Young Phd students investigation” (Ref. M2180, “SolGenALEE”), and by Universidad Rey Juan Carlos with Research Projects M2607, M2180 and M2363. M.G.P. acknowledges the MCIN/AEI for the financial support provide for the project ALPHOMENA_PID2021-123190OB-I00 (LAser assembled Integrable PHOtonic MEtasurfaces & NAnostructures)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Raman scattering and spectroscopic ellipsometry studies of Sb2S3 and Sb2Se3 bulk polycrystals

  • Hajdeu-Chicarosh, Elena
  • Rotaru, Victoria
  • Levcenko, Sergiu
  • Serna, Rosalía
  • Victorov, Ivan A.
  • Guc, Maxim
  • Caballero, Raquel
  • Merino, José Manuel
  • Arushanov, Ernest
  • León, Máximo
6 pags., 5 figs., 2 tabs., Antimony sulfide (Sb2S3) and antimony selenide (Sb2Se3) compounds have attracted considerable attention for applications in different optoelectronic devices due to their notable optical and electrical properties, and due to the strong anisotropy of these properties along different crystallographic directions. However, the efficient use of these promising compounds still requires significant efforts in characterization of their fundamental properties. In the present study, Raman scattering and spectroscopic ellipsometry were used to investigate the vibrational and optical properties of Sb2Se3 and Sb2S3 bulk polycrystals grown by the modified Bridgman method. The first technique proved the presence of the desired Sb2S3 and Sb2Se3 phases in the analyzed ingots and confirmed the absence of any preferential crystallographic orientation at the measured surface of the samples. Spectroscopic ellipsometry was performed using a multi-oscillator Tauc-Lorentz dispersion model, and yielded a complex dielectric function of chalcogenides over the range 1.0-4.6 eV with a three phase model (ambient, surface and bulk materials). Finally, spectral data on the refractive index, the extinction coefficient, the absorption coefficient and the reflectivity at normal incidence, R, were obtained, which serve as a reference for the optical modeling of optoelectronic devices based on polycrystalline Sb2S3 and Sb2Se3 compounds., The authors from Moldova State University, Institute of Applied Physics appreciate the financial support from the Institutional Project ANCD 20.80009.5007.03. This work was also supported by the Spanish Ministry of Science and Innovation (MCIN) and the Agencia Estatal de Investigación (AEI) 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR grants ASSESS (TED2021-129666B-C21), the CELL2WIN (PID2019-104372RB-C32), the MaterOne (PID 2020-116719RB-C42), and the ALPHOMENA (PID2021-123190OB-I00). The authors from IREC belong to the MNT-Solar Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2021 SGR 01286) and are grateful for the support from European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). V. R. acknowledges the support from the predoctoral program AGAUR-FI ajuts (2023 FI-1 00436), Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. M. G. acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva fellowship (IJC2018-038199-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable light emission of Bi and V-doped borosilicate glasses for application in white light-emitting diodes

  • Gorni, Giulio
  • Pérez, Cristina
  • Wolfrum, B.
  • Velázquez, J. J.
  • Kaňková, Hana
  • Llorente, Irene
  • Muñoz Ochando, I.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
Melt-quenched borosilicate glasses, co-doped with Bi and V ions, exhibited broad visible spectrum emissions. Bi ions primarily existed as Bi, acting as network modifiers, lowering the glass transition temperature linearly with increasing Bi content. V ions adopted tetrahedral coordination as [VO] units. Photoluminescence of Bi ions is shifted from blue to longer wavelengths with higher Bi content, associated with the stabilization of Bi and the presence of Bi in different local environments. Combined with V ions, the glasses emitted light covering the entire visible spectrum, offering the potential for white LED applications with correlated color temperatures ranging from 6135 to 4010 K. The highest QY was 11.9 and 8.0 % upon excitation at 325 and 340 nm., The authors would like to acknowledge ALBA Synchrotron for XAS measurements. This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00, and by the CSIC (PIE-202050E195 and project 2021AEP128IO). Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de recuperación, transformación y resiliencia, and by the “European Union NextGenerationEU/PRTR”. C. Pérez acknowledges Programa Investigo funded by Comunidad de Madrid. This work is a part of the activities of the FunGlass project. This project has received funding from the European Union Horizon 2020 research and innovation program under grant agreement no. 739566. The authors acknowledge the ICTS-CNME, and UCM, for offering access to their instruments and expertise. J. Garcia (ICTS-CNME) is acknowl- edged for the help with the TEM measurements
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building nanoplatelet α-MoO3 films: A high quality crystal anisotropic 2D material for integration

  • Nieto-Pinero, Eva
  • Negrete-Aragón, S.
  • Muñoz Ochando, I.
  • Vondráček, M.
  • Galiana, B.
  • Peláez, Ramón J.
  • Maté, Belén
  • López-Andrés, S.
  • Serna, Rosalía
The successful development of nanoplatelet α-MoO3 −films with wavelength-dependent in-plane and out-of-plane birefringence both in the visible and in the medium infrared is demonstrated. The films are prepared by a two-step process starting from structurally amorphous and continuous substoichiometric MoO3-X followed by isothermal annealing at low temperature (250 °C) to yield the formation of a dense network of large α-MoO3 2D nanoplatelets lying in-plane with no overlapping. These α-MoO3 crystals form a film with excellent thickness uniformity (20 nm) and are oriented with the [0 1 0] crystallographic direction parallel to the substrate normal. Finally, we report the film anisotropic optical complex refractive index, both parallel and perpendicular to the plane the full spectral range from 0.7 to 5 eV as determined by spectroscopic ellipsometry, and their characteristic in-plane phonon mode in the IR from FTIR measurements. These results show a promising pathway to the creation of highly functional anisotropic α-MoO3 2D films suitable for the development of integrated nanostructured photonic components., .R, A.I., R. F-P. from the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas” (LMA) at Universidad de Zaragoza»LMA (Spain) are acknowledged for the cross-section lamella preparation and HTREM image acquisition. This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2021-123190OB-I00; by the CSIC (PIE- 202050E195 and project 2021AEP128IO. R.J.P and B.M acknowledge financial support by MCIN/AEI/10.13039/501100011033 under Grant PID2020-113084 GB-100, and JAE-Intro grant 2022-01562; by the Na- tional Autonomous University of Mexico under the 2018 Third Period Program of Interinstitutional Cooperation Special Activities (PAECI) grant for Internationalization Purposes for Undergraduate and Graduate Students DGECI-UNAM/106; co-funded by the Erasmus + Program of the European Union through the Europhotonics Erasmus Mundus Joint Master Degree Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building Conventional Metasurfaces with Unconventional Interband Plasmonics: A Versatile Route for Sustainable Structural Color Generation Based on Bismuth

  • Chacón, Fernando
  • Ruiz de Galarreta, Carlota
  • Nieto-Pinero, Eva
  • García-Pardo, Marina
  • García-Tabares, Elisa
  • Ramos, Nicolás
  • Castillo, Miguel
  • López-García, Martín
  • Siegel, Jan
  • Toudert, Johann
  • Wright, C. David
  • Serna, Rosalía
9 pags., 7 figs. 1 tab., Plasmonic metasurfaces for structural color generation are typically built using the archetypal noble metals, gold, and silver. These possess plasmonic properties in the visible spectrum due to their inherent high free carrier densities. However, they are much more expensive compared to many other metals and exhibit several nanofabrication issues such as bad surface adhesion or thermally activated inter-diffusion. In this work, it is shown that interband plasmonic materials –whose optical properties are driven by interband transitions instead of free carriers— are appealing candidates for the fabrication of sustainable and cost-efficient metasurfaces for structural coloring. By using bismuth, an environment-friendly interband plasmonic material cheaper than gold and silver, nanodisks gap-plasmon metasurfaces and planar Fabry-Perot cavities are modeled and fabricated, which both successfully enable pure colors that can be robustly tailored upon suitable design. By direct experimental comparison between both types of design interms of color efficiency, fabrication complexity, and angular robustness; howbismuth-based gap surface plasmon metasurfaces can be excellent candidates for color microprinting is shown, whereas nanolayered BiFabry-Pérot cavities are ideal for macroscopic color coatings due to their easeof fabrication and implementation., C.R.de G. acknowledges funding from the Marie Sklodowska-Curie Individual Fellow-ship 101068089 (METASCALE) and from Margarita Salas/UniversidadAutónoma de Madrid (CA1/RSUE/2021-00829) funded by the “Next Gen-eration EU” program of the EU. This work had been partly funded by the national research grants ULS_PSB (PID2020-112770RB-C21), AlPHOM-ENA (PID2021-123190OB-I00f), and (ASSESS TED2021-129666B-C22)from the Spanish Research Agency (AEI, Ministry of Research andInnovation)) funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) y la Agencia Estatal de Investigación (AEI) MCIN/AEI/10.13039/501 100 011 033 and by “ERDF a way of making Europe”, and the“European Union NextGenerationEU/PRTR”. R.S. and F.C.-S. would like toacknowledge funding from the INTRAMURALES-CSIC project LANAAP-EU (PIE-202050E195), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of GaP:Ti photovoltaic devices

  • Olea, J.
  • Gonzalo de los Reyes, J.
  • Siegel, Jan
  • Braña, A. F.
  • Godoy-Pérez, G.
  • Benítez-Fernández, R.
  • Caudevilla, D.
  • Algaidy, S.
  • Pérez-Zenteno, F.
  • Duarte-Cano, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Pastor, D.
  • San-Andrés, E.
  • Mártil, I.
6 pages, 6 figures, 1 table, Supersaturated GaP is of interest for the photovoltaic field since optical transitions at energies below the bandgap (2.26 eV) could enhance the overall device efficiency up to theoretically 60%. We have previously demonstrated that Ti supersaturated GaP can be obtained by means of ion implantation and pulsed-laser melting with high structural quality and measured its below-bandgap photoconductivity. In this work we report the first results of a GaP:Ti based photovoltaic device. We have fabricated and measured photovoltaic devices with a GaP:Ti absorber layer showing enhanced external quantum efficiency at wavelengths above 550 nm. Also, we have measured the absorption coefficient (around 104 cm−1) and refractive index of this absorber layer. Finally, current-voltage curves in darkness were measured and analyzed using a two-diodes model, showing improvable characteristics. Ideas to enhance the properties of the devices are suggested., Authors would like to acknowledge the “CAI de Tecnicas Físicas” of the Universidad Complutense de Madrid for the fabrication processes and “Laboratorio de Caracterizaci´ on de Superficies” of CENIM for XPS measurements. This work was partially supported by the Project MADRID-PV2 (P2018/EMT-4308) funded by the Regional Government of Madrid with the support from FEDER Funds, by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants TEC2017-84378-R, PID2020-116508RB-I00 and PID2020-117498RB-I00. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B–C21/C22) funded by the Recovery and Resilience Facility of the EU and ALPHOMENA (PID2021-123190OB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF). D. Caudevilla would also acknowledge the grant PRE2018-083798, financed by MICINN and European Social Fund. F. Perez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for predoctoral contract from UCM (call CT58/21-CT59/ 21). The authors would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. G. Godoy-Perez and R. Benítez-Fernandez acknowledges the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. A. F. Bra˜ na gratefully acknowledges the financial support from rom Grant No. TED2021- 129624B–C43 funded by the Spanish International Research Agency MCIN/AEI/10.13039/501100011033 and by “NextGenerationEU”/ PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring OH incorporation pathways in pulsed laser deposited EuOOH thin films

  • Nieto-Pinero, Eva
  • Gorni, Giulio
  • Caño, Andrés
  • Mariscal, A.
  • Briand, E.
  • Trimaille, I.
  • Ganem, J. J.
  • Vickridge, I.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
6 pages, 7 figures, This study sheds light on the formation of EuOOH thin films intended for photonic applications in light emission. To this end, we designed a unique experiment in which we deposited films by pulsed laser deposition from an Eu2O3 target followed by low temperature annealing in an isotopic furnace, which allows selecting atmospheres (18O2 or D218O vapour) containing specific isotopes. Ion beam techniques have been used for the absolute determination of 16O and H content as well as that of the isotopes (18O, D) incorporated in the films upon annealing. A large content of either H2O or hydroxyl (OH−) groups was identified in the as-deposited films by infrared spectroscopy, while the incorporation of 18O or D upon annealing is limited (≤8 % and ≤ 4 %, respectively). Yet, annealing is a critical and necessary step to achieve the right stoichiometry and to induce the formation of hydroxides. Films produced under the optimum deposition pressure range (≤4 × 10−4 Pa) and annealing atmosphere (D218O) show the EuOOH monoclinic structure, while their photoluminescence response is in excellent agreement with the emission of Eu3+ ions in monoclinic EuOOH., This work was funded by the Spanish Research Agency (AEI, Ministry of Research, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00, and by the CSIC (PIE-202050E195). IBA experiments were carried out at SAFIR platform (Systeme d’Analyse par Faisceaux d’Ions Rapides) at Institute des NanoSciences de Paris (INSP) and they were supported by RADIATE (Research And Development with Ion Beams–Advancing Technology in Europe) project funded by the EU Horizon 2020 research and innovation programme (Grant No 824096). The work of A. Cano was partially supported by the Autonomous Community of Madrid and the European Social Fund (PEJD-2019-PRE/TIC-16082). G. Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de Recuperaci´ on, Transformacion y Resiliencia, and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning light emission in Bi and V codoped MgAl2O4 nanostructured films

  • Gorni, Giulio
  • Serna, Rosalía
  • García-López, J.
  • Gonzalo de los Reyes, J.
This study investigates the synthesis of novel Bi and V-codoped MgAl2O4 nanostructured thin films for near-white-light emission upon UV excitation. Sequential pulsed laser deposition (PLD) from Bi, V, and MgAl2O4 targets was employed to prepare nanostructured films with different compositions. The films have been thoroughly analyzed using Rutherford backscattering spectrometry (RBS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and photoluminescence spectroscopy (PL). Upon heat treatments at 500 °C and 800 °C, the films exhibit a broad blue emission in Bi-doped films and a broad yellow emission in V-doped films, respectively. We demonstrate that a strategic combination of Bi and V codoping in MgAl2O4 nanostructures results in near-white light emission. This study highlights the ability to finely control the nanostructure and emission properties of thin films using PLD, and the use of abundant and non-toxic elements to produce white light emission, with significant implications for advanced and sustainable photonic applications., This work was funded by the Spanish Research Agency (AEI, Ministry of Science, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00, and by the CSIC (PIE-202050E195 and project 2021AEP128IO). Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de recuperacion, transformacion y resiliencia, and by the “European Union NextGenerationEU/PRTR”. The CNA acknowledges the Spanish Ministry of Science, Innovation and Universities for grant number ICTS-2020-02 US-4 (FEDER/EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semimetal/Substrate Cavities Enabling Industrial Materials for Structural Coloring

  • Chacón, Fernando
  • Serna, Rosalía
10 pages, 6 figures, This work was partly fundedby the national research grants, ALPHOMENA (PID2021-123190OB-I00f) and ASSESS (TED2021-129666B−C21 andC22) funded by MCIN/AEI/10.13039/501100011033 and bythe European Union NextGenerationEU/PRTR and theEuropean Regional Development Fund (ERDF), as well asfunding from the INTRAMURALES-CSIC project LANAAP-EU (PIE-202050E195)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and nonlinear optical properties of TeO2–WO3–PbO thin film glasses

  • Gorni, Giuliio
  • Muñoz-Martín, David
  • Ruiz de la Cruz, A.
  • Martin-Diaconescu, V.
  • Simonelli, L.
  • García-López, J.
  • Fernández-Navarro, José María
  • Solís Céspedes, Javier
  • Gonzalon de los Reyes, J.
10 pages, 8 figures, 3 tables, Lead tungsten tellurite thin film glasses have been produced by pulsed laser deposition in a broad TeO2 compositional range (50–85 mol%). Films present high transparency with an optical band gap Eg = 3.3–3.4 eV, large refractive index (n > 2) and reduced absorption (k < 10−4) in the visible and near infrared ranges, whereas their nonlinear optical response (∣χ(3)∣) is found to be ≥ 10−12 esu at 1.3 μm. The dependence of n, Eg and ∣χ(3)∣ with film composition is analyzed and compared with the values determined for the parent bulk glasses. ∣χ(3)∣ increases as the TeO2 content in the film glasses decreases, while it remains constant for bulk glasses. This behaviour is analyzed in the frame of Line's model and correlated to the structural differences between bulk and film glasses. In the case of bulk glasses, X-ray absorption spectroscopy results at the W L3 and L1-edges clearly indicate the presence of W6+ ions in a distorted octahedral coordination, with the coordination environment and W–O bond distance remaining unchanged regardless of the WO3 content. Raman analysis suggests that films have a structure close to that of bulk glasses, with a moderate WO3 and PbO enrichment, and a relative increase of the non-bridging oxygen fraction that are proposed to be responsible for the observed increase of ∣χ(3)∣ in the films., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020-112770RB-C21 and PID2021-123190OB-I00, and by the CSIC (PIE-202050E195). G. Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/10.13039/501100011033, by Plan de Recuperación, Transformación y Resiliencia, and by the “European Union NextGeneration EU/PRTR”. A. Jha (Institute for Materials Research, Univ. of Leeds) is thanked for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring bismuth visible emission via glass composition engineering

  • Gorni, Giulio
  • Pérez, Cristina
  • Ramos-Justicia, J. F.
  • Urbieta, A.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
13 pages, 10 figures, 1 table, We explore the tunability of bismuth ion (Bi<sup>3+</sup>) emission by modifying the glass composition and structure through the inclusion of specific alkaline (Li<sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>) and alkaline earth (Ca<sup>2+</sup>, Ba<sup>2+</sup>) ions. Bi<sup>3+</sup>-doped oxide glasses were synthesized using the melt-quenching method and extensively analyzed using differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray absorption spectroscopy (XAS). Their optical properties were evaluated through photoluminescence (PL) and photoluminescence excitation (PLE) spectroscopy. Our findings show that the glass transition temperature and network structure exhibit a different evolution when only alkaline ions or both alkaline and alkaline earth ions are included simultaneously. This behavior is related to the presence or not of the mixed alkali effect in different glass systems. XAS analysis confirms the presence of Bi<sup>3+</sup> ions. The incorporation of Li<sup>+</sup>, in combination with Na<sup>+</sup> and/or K<sup>+</sup>, leads to broad PL emission spanning from blue to near-white light and extending into the orange-red region under UV excitation. Notably, Li <sup>+</sup> plays a crucial role in shifting the Bi<sup>3+</sup> emission toward the orange-red spectrum, with Na<sup>+</sup> and K<sup>+</sup> further enhancing this shift, likely due to the mixed alkali effect. Meanwhile, glasses containing Ca<sup>2+</sup> and Ba<sup>2+</sup> exhibit tunable cyan-to-white emission, which can be precisely controlled by adjusting their concentrations. This study highlights the critical role of glass composition engineering in optimizing the luminescent properties of Bi<sup>3+</sup>-doped glasses, offering valuable insights for the development of advanced photonic materials., This work was funded by the Spanish Research Agency (AEI, Ministry of Science, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00/AEI/10.13039/501100011033/FEDER,UE, and by the CSIC (PIE-202050E195 and project 2021AEP128IO). This work has been financed by UCM under project PR3/23–30813. Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/10.13039/501100011033, by Plan de recuperación, transformación y resiliencia, and by the “European Union NextGenerationEU/PRTR”. C. Pérez acknowledges Programa Investigo funded by Comunidad de Madrid. J. F. Ramos-Justicia thanks economical support of UCM-Banco Santander CT15/23 predoctoral grant. The authors would like to acknowledge ALBA Synchrotron for XAS measurements performed during in-house beamtime (2024068474)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid-liquid phase transition of CuCl nanocrystals embedded in glass: A versatile sustainable platform for high-contrast analog optical switching

  • Cabello, Fática
  • Jiménez de Castro, Miguel
  • Mariscal-Jiménez, Antonio
  • Cuenda, Diego
  • Serna, Rosalía
  • Haro-Poniatowski, Emmanuel
7 pages, 7 figures, We demonstrate a novel approach to show high-contrast thermo-optical switching by profiting from the solid–liquid phase transition of CuCl nanocrystals embedded in a transparent borosilicate glass. These nanostructured glasses exhibit a distinct excitonic absorption in the near-UV region (369 nm), which undergoes significant modulation upon thermally induced phase changes of the CuCl nanocrystals. Exploiting the low melting point of CuCl relative to the glass matrix, we achieve thermally reversible solid–liquid–solid transitions, producing a pronounced optical hysteresis effect. Notably, by heating beyond the melting point, an approach that has not previously explored, we observe a larger and extended optical hysteresis contrast than reported in earlier studies, and with a distinct sail-like shape. Furthermore, we show that these transitions can be selectively interrupted at different heating (cooling) stages, enabling multilevel analog optical switching. These findings highlight the exceptional potential of CuCl-doped glasses as a robust, sustainable and tunable platform for advanced optoelectronic applications, paving the way for innovative optical memory and signal processing technologies., This work was funded by the Spanish Research Agency (AEI, Ministry of Research, Innovation and Universities) and the European Regional Development Fund (ERDF) funded by MCIN/AEI/10.13039/ 501100011033, by Plan de Recuperacion, Transformacion y Resiliencia, and by the “European Union Next Generation EU/PRTR” under grants PID2021-123190OB-I00, TED2021-129666B-C22, and by the CSIC (PIE- 202050E195). EHP acknowledges the support of Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) of Mexico for financial support. We thank Ing. Patricia Castillo Ocampo of UAM- Iztapalapa for the HRTEM measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultraviolet interband plasmonics down to the vacuum UV with ultrathin amorphous silicon nanostructures

  • Toudert, Johann
  • Serna, Rosalía
  • Martín-Sánchez, Javier
  • Larruquert, Juan Ignacio
  • Calvo-Barrio, Lorenzo
Silicon dominates electronics, optoelectronics, photovoltaics and photonics thanks to its suitable properties, abundance, and well-developed cost-effective manufacturing processes. Recently, crystalline silicon has been demonstrated to be an appealing alternative plasmonic material, both for the infrared where free-carrier plasmons are enabled by heavy doping, and for the ultraviolet (UV) where plasmonic effects are induced by interband transitions. Herein, we demonstrate that nanostructured amorphous silicon exhibits such so-called interband plasmonic properties in the UV, as opposed to the expectation that they would only arise in crystalline materials. We report optical plasmon resonances in the 100-to-300 nm wavelength range in ultrathin nanostructures. These resonances shift spectrally with the nanostructure shape and the nature of the surrounding matrix, while their field enhancement properties turn from epsilon-near-zero plasmonic to surface plasmonic. We present a vacuum UV wavelength- and polarization-selective ultrathin film absorber design based on deeply-subwavelength anisotropically-shaped nanostructures. These findings reveal amorphous silicon as a promising material platform for ultracompact and room-temperature-processed UV plasmonic devices operating down to vacuum UV wavelengths, for applications including anticounterfeiting, data encryption and storage, sensing and detection. Furthermore, these findings raise a fundamental question on how plasmonics can be based on amorphous nanostructures., This work has been partly funded by the national research Grants ALPHOMENA (PID2021-123190OB-I00f) and ASSESS (TED2021-129666B-C21 and C22) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR and the European Regional Development Fund (ERDF), and by the national research grant CoatFuvEspIon (PID2022-142417OB-I00) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node ‘Laboratorio de Microscopías Avanzadas’ at University of Zaragoza., Peer reviewed