Pasar al contenido principal

RECUBRIMIENTOS PARA INSTRUMENTACION ESPACIAL Y FOTONICA EN EL UV Y UV LEJANO: NANOESTRUCTURA Y OPTIMIZACION INCLUYENDO IONES DE ALTA ENERGIA

PID2022-142417OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ ion luminescence characterization of defects produced in diamond by 6 MeV carbon ion irradiation

  • Jia, Gangyuan
  • Valls-Vicent, Francesc
  • Padhi, Santanu Kumar
  • Enríquez-Pérez, Esther
  • García, Gastón
  • Zhang, Yufei
  • Olivares Villegas, José
  • Wang, Kaiyue
7 pages, 8 figures, 2 tables, The present work is focused on the in-situ characterization of defects in single-crystal diamond induced by 6 MeV carbon ion beam irradiation using ionoluminescence (IL) spectroscopy. The main purpose was to study the optical properties of several defects following the IL evolution and characterize the damage degree using Raman spectra. Three emissions were recorded by IL spectra, located at 430, 504, 575.5 nm with ion fluence in the range of 0∼7 × 1014 cm−2, and were attributed to the A-band, 3H, and NV0 centers, respectively. The 3H centers exhibited a non-monotonic behavior with respect to fluence, with a rapid initial increase followed by a gradual decay. Based on a double exponential model, the data had been well-fitted, and the value of fluence at half of the initial luminescence (F1/2) was found to be notably high (of order 1014 cm−2). A simple Birks-Black model was applied to fit the evolution of the A-band and NV0 centers, and luminescence decays were observed with F1/2 values of (7.9 ± 2.2) × 1011 and (1.2 ± 0.6) × 1012 cm−2, respectively. At the initial stage of irradiation, the intensity decay of A-band and NV0 centers is accompanied by an increase of 3H centers, suggesting that there is a conversion between the defect types., This work was supported by China Scholarship Council (CSC, File No. 202308140156), National Natural Science Foundation of China (Grant No. U21A2073, 62304175), Shanxi Province Natural Science Foundation (Grant Nos. 202203021222207, 202203021211210, 202103021224268), the Taiyuan University of Science and Technology Research Initiation Fund Project (Grant Nos. 20222065, 20222005), the European Union as part of the Horizon Europe call HORIZON-INFRA- 2021-SERV-01 (Grant No. 101058414), co-funded by UK UKRI (Grant No. 10039728), the Swiss State Secretariat for Education, Research and Innovation (SERI) (Grant No. 22.00187), the Spanish Ministry of Science and Innovation (MICINN) (Grant No. PID2022-142417OB-I00 and PID2020-112770RB-C22), and the Madrid Regional Government through the TechnoFusion (III)-CM program (Grant No. S2018/EMT- 4437). The authors acknowledge the support from The Centro de Microanalisis de Materiales (CMAM) - Universidad Autonoma de Madrid, for the beam time proposals IMP- 006/24, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-consistent optical constants of LiF films

  • Li, Shuangying
  • Honrado-Benítez, Carlos
  • López-Reyes, Paloma
  • Larruquert, Juan Ignacio
  • Zhang, Jinlong
  • Wang, Zhanshan
13 pages, 7 figures, 1 table, Lithium fluoride (LiF) has the shortest known cut-off in nature, with transparency down to 102.5 nm, which makes it a critical material for far-ultraviolet (FUV, 100 nm < λ < 200 nm) optical elements. Accurate optical constants are essential for element design. As with other metal fluorides, LiF film optical constants are temperature sensitive. This study presents optical constants for LiF thin films deposited by boat evaporation onto substrates at 298 K and 503 K. Reflectance and transmittance in the range of 30-195 nm were measured in situ, in order to avoid the instability of LiF films, particularly in contact with humid air. Ellipsometry measurements were carried out from 210 to 1690 nm and were fitted with a Lorentz oscillator. The self-consistent optical constants were obtained using the Kramers-Kronig (KK) analysis by extending the data range with literature data and extrapolations. Calculated results using the obtained optical constants show good agreement with the experimental measurements. Furthermore, the global self-consistency was assessed by a classical sum-rule at the whole range, and the local self-consistency by what we believe to be a novel sum-rule method incorporating window functions at each photon energy range, yielding satisfactory results. These are the first self-consistent optical constants reported for LiF films., National Key Research and Development Program of China (2023YFF0715602); China Scholarship Council (202106260082); Agencia Estatal de Investigación (PID2019-105156GB-I00, PID2022-142417OB-I00); National Natural Science Foundation of China (62475193, 62192772)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-consistent optical properties of PEALD-Al2O3 thin films

  • Rodriguez de Marcos, Luis V.
  • Christophersen, Marc
  • Batkis, Mateo F.
  • Del Hoyo, Javier G.
  • Patel, Jessica
  • Wollack, Edward J.
  • Christodoulides, Joseph A.
  • Larruquert, Juan Ignacio
  • Quijada, Manuel A.
15 pages, 6 figures, 2 tables, A self-consistent set of optical properties of Al<inf>2</inf>O<inf>3</inf> thin films is reported in this manuscript. These films are commonly used in optical coatings from the near ultraviolet to the infrared spectral ranges due to their transparency, medium refractive index, and environmental stability. Additionally, optical data for this material in the far and the extreme ultraviolet ranges (FUV-EUV, λ = 115-200- and λ = 10-115-nm, respectively) are also presented, where optical data derived from thin films of this material is relatively scarce. Aluminum oxide films were deposited by plasma-enhanced atomic layer deposition (PEALD) onto Si and MgF<inf>2</inf> substrates heated at 300 °C. Optical measurements (transmittance, reflectance, and ellipsometry) were performed in a very broad spectral range jointly covering from 58.4 nm to 43 µm. Using these measurements along with extrapolations, a Kramers-Kronig analysis procedure has been followed to obtain a self-consistent set of optical properties that successfully reproduced the experimental data. Global and local self-consistency of the derived optical properties have also been satisfactorily evaluated through the application of sum rules., Astrophysics Science Division (NASA APRA grant # 22-APRA22-0027); European Commission (PID2022142417OB-I00, MCIN/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances on MagLITe: deposition and photocollection efficiency

  • Gelli, B.
  • Gomes, G.
  • Sola, R.
  • Palavéri, V.C.
  • López-Reyes, Paloma
  • Larruquert, Juan Ignacio
  • Schio, P.
  • Marques, F.C.
  • Kemp, E.
6 pages, 4 figures . -- Light Detection In Noble Elements (LIDINE 2024) São Paulo, Brasil 26–28 August 2024, MagLITe (Magnesium Fluoride Light collection Improvement Technique) is a novel approach to enhancing light collection efficiency in liquid argon (LAr) particle detectors while addressing critical limitations of traditional wavelength shifters (WLS). This work presents new results on the development, characterization, and performance of MagLITe. Using a protective thin-film coating of magnesium fluoride (MgF), MagLITe mitigates issues of WLS degradation and reflection losses while increasing photocollection efficiency. A modified Transfer Matrix Method (TMM) was employed to model and optimize the optical stack, and experimental validation was performed using a custom-designed LAr test setup. A first comparative measurements between bare WLS and MagLITe-coated samples demonstrate a 7.3% increase in photocollection efficiency, validating the potential of MagLITe for future large-scale neutrino experiments., This research used facilities of the Brazilian Synchrotron Light Laboratory (LNLS), part of the Brazilian Center for Research in Energy and Materials (CNPEM), a private non-profit organization under the supervision of the Brazilian Ministry for Science, Technology, and Innovations (MCTI). The LCIS staff is acknowledged for the assistance during the experiments [20231068]. This work was partially supported by the National Council for Scientific and Technological Development (CNPq), Brazil. This work was supported by grant PID2022-142417OB-I00 (CoatFuvEspIon) funded by MCIN/AEI/10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultraviolet interband plasmonics down to the vacuum UV with ultrathin amorphous silicon nanostructures

  • Toudert, Johann
  • Serna, Rosalía
  • Martín-Sánchez, Javier
  • Larruquert, Juan Ignacio
  • Calvo-Barrio, Lorenzo
Silicon dominates electronics, optoelectronics, photovoltaics and photonics thanks to its suitable properties, abundance, and well-developed cost-effective manufacturing processes. Recently, crystalline silicon has been demonstrated to be an appealing alternative plasmonic material, both for the infrared where free-carrier plasmons are enabled by heavy doping, and for the ultraviolet (UV) where plasmonic effects are induced by interband transitions. Herein, we demonstrate that nanostructured amorphous silicon exhibits such so-called interband plasmonic properties in the UV, as opposed to the expectation that they would only arise in crystalline materials. We report optical plasmon resonances in the 100-to-300 nm wavelength range in ultrathin nanostructures. These resonances shift spectrally with the nanostructure shape and the nature of the surrounding matrix, while their field enhancement properties turn from epsilon-near-zero plasmonic to surface plasmonic. We present a vacuum UV wavelength- and polarization-selective ultrathin film absorber design based on deeply-subwavelength anisotropically-shaped nanostructures. These findings reveal amorphous silicon as a promising material platform for ultracompact and room-temperature-processed UV plasmonic devices operating down to vacuum UV wavelengths, for applications including anticounterfeiting, data encryption and storage, sensing and detection. Furthermore, these findings raise a fundamental question on how plasmonics can be based on amorphous nanostructures., This work has been partly funded by the national research Grants ALPHOMENA (PID2021-123190OB-I00f) and ASSESS (TED2021-129666B-C21 and C22) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR and the European Regional Development Fund (ERDF), and by the national research grant CoatFuvEspIon (PID2022-142417OB-I00) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node ‘Laboratorio de Microscopías Avanzadas’ at University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of commercial EJ-212 PVT scintillators as proton beam diagnostics. Luminescent study and Birks coefficients

  • Cebriano, Teresa
  • Apiñaniz, Jon Imanol
  • Rico, Mauricio
  • Olivares Villegas, José
  • Padhi, Santanu Kumar
  • Pérez, Isabel Rodríguez
  • García, Gastón
  • Gatti, Giancarlo
7 pages, 7 figures, Plastic scintillators exhibit great versatility in radiation detection, making them essential diagnostic tools in numerous scientific areas. Their application in characterizing charged particle beams – whether from particle accelerators or laser-plasma interactions – is particularly common. However, the detailed processes that govern their luminescence are still being studied, primarily due to the structural complexity of the organic macro-molecules that constitute them. Moreover, precise calibration is crucial for accurately determining incident particle flux – whether from photons or charged particles – which is vital for exact dose calculations. This paper investigates the luminescent properties of the plastic scintillator EJ-212 from Eijen by irradiating it with monoenergetic pulsed proton beams using a spectrometer. The Birks coefficients, which indicate the number of luminescent photons produced per incident particle, were obtained by directly capturing the luminescence images with a CMOS camera coupled to a standard objective. Additionally, Monte Carlo simulations were conducted to evaluate the energy deposited by protons as a function of penetration depth for energies ranging from 2 to 8 MeV., We are grateful to the CMAM technical staff for their support and the beam time access with the proposal code STD055/23, to the financial support of the Ministry of Science, Innovation, and Universities of the Government of Spain grants no. PID2022-137339OB-C22, no. PID2023-148992OB-C22 and no. PID2022-142417OB-I00. We also acknowledge Grant ICT2022-007871, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Lastly, thanks to the financial support from The Spanish Nuclear Safety Council (CSN) , grant no. PR-084-2022., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and characterisation of a radiobiology proton beamline using radiochromic film dosimetry

  • Marques Coelho, Carina
  • de la Fuente Fernández, Pablo
  • Bononad, Paula
  • Viñals, Sílvia
  • Tavares de Sousa, Célia
  • Galaviz, D.
  • Herrera, Federico
  • García-López, Gastón
  • Del Monte-García, Inés
  • Olivares, José
  • Ynsa Alcala, Maria Dolores
  • Manso-Silván, Miguel
  • Sánchez-Parcerisa, Daniel
  • Cortés-Llanos, Belén
[Data Statement] The custom scripts developed for data analysis and dosimetry validation are considered integral components of the internal manuals and standard operating procedures at CMAM and, therefore, are available upon reasonable request to the authors rather than through open public repositories. The data that support the findings of this study are available upon reasonable request from the authors., Objective. To develop and optimise a dedicated low-energy proton beamline at the Centre for Micro-Analysis of Materials (CMAM, Madrid, Spain) for radiobiological applications. Approach. An automated irradiation system was implemented, integrating Gafchromic EBT3 radiochromic film dosimetry corrected for linear energy transfer dependent quenching and post-irradiation darkening. Dosimetric calibration was performed using multichannel analysis, and beam performance was systematically evaluated as a function of distance, raster scanning area, beam intensity and reproducibility. Main results. Optimal operating conditions were identified at moderate beam currents (⩽1nA) and scanning areas of 40 × 40 to 50 × 50mm<sup>2</sup>, yielding homogeneous dose distributions with reproducibility better than 8%. The dosimetric protocol demonstrated linearity across clinically relevant dose ranges and allowed a reliable correlation between irradiation parameters and absorbed dose. Proof-of-concept experiments on U-87 MG glioblastoma cells confirmed the system’s ability to deliver controlled and biologically effective proton exposures, as demonstrated by clonogenic survival assays. Significance. These results establish the CMAM implantation beamline as a robust and versatile platform for preclinical proton radiobiology, providing accurate dosimetric control and supporting investigations of relative biological efficacy. The system facilitates translational advances in proton radiobiology, bridging physical and biological studies in low-energy proton irradiation., his research was partially funded by FCT—Fundação para a Ciência e a Tecnologia, I P, Portugal, ProtoTera Grant—PRT/BD/151545/2021, Centre Grant to LIP LA/P/0016/2020, UID/04046/2025 - Biosystems and Integrative Sciences Institute Centre Grant (https://doi.org/10.54499/2023.14971.PEX), FCT/Mobility/1309428002/2024-25 and RE-C06-i06-m02 - ‘Reforço do financiamento de Parcerias Internacionais em Ciência, Tecnologia e Inovação’. This Project has received funding from the European Union under the Euratom program, Horizon 2020 under Grant agreement n∘ 101060008 (OFFERR Platform). The authors appreciate the support of the ENEN2plus mobility Grant, funded by the European Union under the Euratom Research and Training Program. The views and opinions expressed are those of the authors only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the granting authority can be held responsible for them. It was also partially funded by Comunidad de Madrid under Projects S2022/BMD-7434 ASAP-CM and PR27/21-014, and by the Agencia Estatal de Investigación under Projects PLEC2022-009256, PID2022-141080OB-C22, PID2022-142417OB-I00 (funded by MCIN/AEI/10.13039/501100011033), and CNS2024-154729. The authors acknowledge the support from CMAM-UAM for the beam time (IMP007/23 and IMP020/24) and the technical staff. C T d S acknowledges the program Atraccion de Talento (Comunidad Autonoma de Madrid), reference 2020-T1/IND-19889. Some of the results presented in this work were derived from the research conducted under the F11024 Coordination Research Project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real‑time ionoluminescence as a probe of ion irradiation damage in monazite ceramics

  • Marín Cortés, Sonia
  • Crespillo, Miguel L.
  • Valls-Vicent, F.
  • Mariscal, A.
  • Fernández Lozano, José Francisco
  • Peña-Rodríguez, O.
  • Olivares, J.
  • Enríquez, E.
Advanced ceramics are being developed as durable alternatives to conventional matrices for immobilizing high-level nuclear waste. Rare-earth monazite-type ceramics (REPO₄), particularly EuPO₄, are promising due to their chemical durability, thermal stability, and actinide incorporation capacity. In this study, single-phase EuPO₄ was synthesized via a scalable sintering route and irradiated with high-energy 50 MeV I, 20 MeV C, and 12 MeV Si ions over a wide fluence range covering a broad range of electronic and nuclear stopping powers, to assess radiation tolerance and sensing capability. Structural and optical analyses (XRD, Raman, PL, and in situ ionoluminescence) revealed strong correlations between damage and luminescence. Carbon ions induced partial recrystallization and enhanced emission, while iodine and silicon caused greater damage and altered Eu³ ⁺ transitions. These results position EuPO₄ as both a robust nuclear waste host and a real-time optical sensor for radiation-induced structural degradation in nuclear storage environments, potentially mitigating containment failure and leakage., The authors acknowledge the Grants PDC2022–133788-I00 and PID2022–142417OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the support from Centro de Microanálisis de Materiales (CMAM)-Universidad Autónoma de Madrid, for the beam time proposal with code IMP011/23, and its technical staff for their contribution to the operation of the accelerator. M.L.C. acknowledges financial support from the research project “Captacion de Talento UAM” Ref: #541D300 supervised by the Vice-Chancellor of Research of Universidad Autónoma de Madrid (UAM)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Development and characterisation of a radiobiology proton beamline using radiochromic film dosimetry

  • Marques Coelho, Carina
  • de la Fuente Fernández, Pablo
  • Bononad, Paula
  • Viñals, Sílvia
  • Tavares de Sousa, Célia
  • Galaviz, Daniel
  • Herrera, Federico
  • del Monte-García, Inés
  • Sánchez Parcerisa, Daniel
  • Cortés-Llanos, Belén
Objective. To develop and optimise a dedicated low-energy proton beamline at the Centre for Micro-Analysis of Materials (CMAM, Madrid, Spain) for radiobiological applications. Approach. An automated irradiation system was implemented, integrating Gafchromic EBT3 radiochromic film dosimetry corrected for linear energy transfer dependent quenching and post-irradiation darkening. Dosimetric calibration was performed using multichannel analysis, and beam performance was systematically evaluated as a function of distance, raster scanning area, beam intensity and reproducibility. Main results. Optimal operating conditions were identified at moderate beam currents (⩽1nA) and scanning areas of 40 × 40 to 50 × 50mm2, yielding homogeneous dose distributions with reproducibility better than 8%. The dosimetric protocol demonstrated linearity across clinically relevant dose ranges and allowed a reliable correlation between irradiation parameters and absorbed dose. Proof-of-concept experiments on U-87 MG glioblastoma cells confirmed the system’s ability to deliver controlled and biologically effective proton exposures, as demonstrated by clonogenic survival assays. Significance. These results establish the CMAM implantation beamline as a robust and versatile platform for preclinical proton radiobiology, providing accurate dosimetric control and supporting investigations of relative biological efficacy. The system facilitates translational advances in proton radiobiology, bridging physical and biological studies in low-energy proton irradiation.