Pasar al contenido principal

NANOTERAGNOSIS ESTIMULADA MAGNETICAMENTE PARA MODELO Y TERAPIA DEL ICTUS

PID2022-141080OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Nano-patterning using ultra-thin alumina membranes

  • Fernández González, Claudia
  • Ruiz Gómez, Sandra
  • Arché Núñez, Ana
  • Pérez García, Lucas
  • Tavares de Sousa, Célia
With the mass production of well-controlled and low-cost nanostructures on the horizon, considerable attention has been given to porous anodic alumina (PAA) templates to assist in the fabrication of both individual and ordered nanostructured objects – particles, rods, wires, and holes – with applications in electronics, data storage, bioengineering, and nanomedicine. The fabrication of free-standing PAA templates, several microns thick, as well as their applications, have been largely described in the literature. In recent years, research has focused on the synthesis of ultra-thin anodic alumina membranes (UTAMs), making them compatible with top-down fabrication and large-scale production. The ability to obtain these nanostructures on different surfaces, including glass, silicon wafers, or flexible substrates, extends their range of applications, enabling the integration of nanostructured materials on top of thin layers and allowing for the precise tuning of the physical and chemical properties of the materials. This review focuses on this new and promising nanopatterning approach to fabricate large areas of ordered nanostructures using UTAMs as patterning masks. We report the most recent advances in the synthesis of UTAMs, focusing on two different approaches: in-situ anodization of thin aluminum films on various substrates and deterministic transfer of UTAMs onto a desired substrate. In the first case, we collect information regarding substrates, buffer layers, growth of Al films, anodization, and the post-treatment of the UTAMs. In the second case, we focus the review on the synthesis of UTAMs and, especially, on the transfer process to the substrate. For both methods, we compare the results regarding the nanostructure’s self-organization and the control of size, shape, and spacing. Finally, we will review several applications in which the use of UTAMs plays a key role in the performance of nanostructured devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water partial pressure X-ray photoelectron spectroscopy study of the conformation of fibrinogen on silanized hydrophilic/hydrophobic surfaces

  • Fernández-Alonso, Francisco Javier
  • Calvo, Rodrigo
  • Sanz Calderón, Aida
  • Villar-García, Ignacio J.
  • Saiz, Fernan
  • Hernando-Pérez, Mercedes
  • Pérez Dieste, Virginia
  • Manso Silván, Miguel
Near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) allows the study of the conformational state of adsorbed proteins on surfaces at water partial pressures of a few mbar. In the present study, we used two organosilanes to prepare hydrophilic and hydrophobic surfaces. For the NAP-XPS study, human fibrinogen, a sorbent serum protein with conformational dependent function, was adsorbed on contrasting surfaces, studied at 2 mbar H<inf>2</inf>O vapor pressure and compared with analysis at ultrahigh vacuum (UHV). Two different excitation energies were used to gain in-depth sensitivity. The C 1 s core level was fitted, and the components correlated with the presence of surface-exposed hydrophobic or hydrophilic moieties. The mode of analysis significantly affects the data on the conformation of fibrinogen on hydrophilic surfaces, showing surface-exposed (more intense) hydrophobic cues in the H<inf>2</inf>O NAP mode than in the UHV mode. Furthermore, the intensity of the C[sbnd]H peak exhibits the greatest variability in intensity, being more surface segregated on hydrophilic surfaces than on hydrophobic ones. The latter statement is sustained only for H<inf>2</inf>O NAP conditions, with no significant differences observed in the UHV mode. The work envisages greater sensitivity for forthcoming analyses of adsorbed proteins and other biomolecules by using water partial pressure XPS mode., The current research was funded through grants PID2020–112770RB-C22, PID2022–141080OB-C22, CNS2022–135285, PID2023–147200OB 100, PID2023–151371OB-C22, PID2023–151078OB-I00 and RyC2021–030929-I by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Additional funding from SI3/PJI/ 2021–00216 by Comunidad de Madrid and UAM is also acknowledged. FJFA acknowledges the Formación de Profesorado Universitario program, ref. FPU22/04365. Time allocated at ALBA synchrotron through 2020094555-BL24-CIRCE experiment is greatly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nano-patterning using ultra-thin alumina membranes

  • Fernández-González, C.
  • Ruiz-Gómez, S.
  • Arché-Núñez, A.
  • Pérez, L.
  • Tavares de Sousa, C.T.
With the mass production of well-controlled and low-cost nanostructures on the horizon, considerable attention has been given to porous anodic alumina (PAA) templates to assist in the fabrication of both individual and ordered nanostructured objects – particles, rods, wires, and holes – with applications in electronics, data storage, bioengineering, and nanomedicine. The fabrication of free-standing PAA templates, several microns thick, as well as their applications, have been largely described in the literature. In recent years, research has focused on the synthesis of ultra-thin anodic alumina membranes (UTAMs), making them compatible with top-down fabrication and large-scale production. The ability to obtain these nanostructures on different surfaces, including glass, silicon wafers, or flexible substrates, extends their range of applications, enabling the integration of nanostructured materials on top of thin layers and allowing for the precise tuning of the physical and chemical properties of the materials. This review focuses on this new and promising nanopatterning approach to fabricate large areas of ordered nanostructures using UTAMs as patterning masks. We report the most recent advances in the synthesis of UTAMs, focusing on two different approaches: in-situ anodization of thin aluminum films on various substrates and deterministic transfer of UTAMs onto a desired substrate. In the first case, we collect information regarding substrates, buffer layers, growth of Al films, anodization, and the post-treatment of the UTAMs. In the second case, we focus the review on the synthesis of UTAMs and, especially, on the transfer process to the substrate. For both methods, we compare the results regarding the nanostructure's self-organization and the control of size, shape, and spacing. Finally, we will review several applications in which the use of UTAMs plays a key role in the performance of nanostructured devices. © 2024 The Authors, Funded by the European Union through project BEETHOVEN (101129912). Partially funded also by MCIN/AEI, Spain/10.13039/501100011033 through Projects PID2020-117024GB-C43, PID2022-141080OB-C22 and TED2021-130957B-C52. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D, Spain (Grant SEV-2016-0686). A. A.-N. and S. R.-G. acknowledge funding through the Advanced Materials programme supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat de Catalunya, Spain . C.T.S. acknowledges the program Atraccion de Talento (CAM), ref. 2020-T1/IND-19889. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the other granting authorities. Neither the European Union nor the granting authorities can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and characterisation of a radiobiology proton beamline using radiochromic film dosimetry

  • Marques Coelho, Carina
  • de la Fuente Fernández, Pablo
  • Bononad, Paula
  • Viñals, Sílvia
  • Tavares de Sousa, Célia
  • Galaviz, D.
  • Herrera, Federico
  • García-López, Gastón
  • Del Monte-García, Inés
  • Olivares, José
  • Ynsa Alcala, Maria Dolores
  • Manso-Silván, Miguel
  • Sánchez-Parcerisa, Daniel
  • Cortés-Llanos, Belén
[Data Statement] The custom scripts developed for data analysis and dosimetry validation are considered integral components of the internal manuals and standard operating procedures at CMAM and, therefore, are available upon reasonable request to the authors rather than through open public repositories. The data that support the findings of this study are available upon reasonable request from the authors., Objective. To develop and optimise a dedicated low-energy proton beamline at the Centre for Micro-Analysis of Materials (CMAM, Madrid, Spain) for radiobiological applications. Approach. An automated irradiation system was implemented, integrating Gafchromic EBT3 radiochromic film dosimetry corrected for linear energy transfer dependent quenching and post-irradiation darkening. Dosimetric calibration was performed using multichannel analysis, and beam performance was systematically evaluated as a function of distance, raster scanning area, beam intensity and reproducibility. Main results. Optimal operating conditions were identified at moderate beam currents (⩽1nA) and scanning areas of 40 × 40 to 50 × 50mm<sup>2</sup>, yielding homogeneous dose distributions with reproducibility better than 8%. The dosimetric protocol demonstrated linearity across clinically relevant dose ranges and allowed a reliable correlation between irradiation parameters and absorbed dose. Proof-of-concept experiments on U-87 MG glioblastoma cells confirmed the system’s ability to deliver controlled and biologically effective proton exposures, as demonstrated by clonogenic survival assays. Significance. These results establish the CMAM implantation beamline as a robust and versatile platform for preclinical proton radiobiology, providing accurate dosimetric control and supporting investigations of relative biological efficacy. The system facilitates translational advances in proton radiobiology, bridging physical and biological studies in low-energy proton irradiation., his research was partially funded by FCT—Fundação para a Ciência e a Tecnologia, I P, Portugal, ProtoTera Grant—PRT/BD/151545/2021, Centre Grant to LIP LA/P/0016/2020, UID/04046/2025 - Biosystems and Integrative Sciences Institute Centre Grant (https://doi.org/10.54499/2023.14971.PEX), FCT/Mobility/1309428002/2024-25 and RE-C06-i06-m02 - ‘Reforço do financiamento de Parcerias Internacionais em Ciência, Tecnologia e Inovação’. This Project has received funding from the European Union under the Euratom program, Horizon 2020 under Grant agreement n∘ 101060008 (OFFERR Platform). The authors appreciate the support of the ENEN2plus mobility Grant, funded by the European Union under the Euratom Research and Training Program. The views and opinions expressed are those of the authors only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the granting authority can be held responsible for them. It was also partially funded by Comunidad de Madrid under Projects S2022/BMD-7434 ASAP-CM and PR27/21-014, and by the Agencia Estatal de Investigación under Projects PLEC2022-009256, PID2022-141080OB-C22, PID2022-142417OB-I00 (funded by MCIN/AEI/10.13039/501100011033), and CNS2024-154729. The authors acknowledge the support from CMAM-UAM for the beam time (IMP007/23 and IMP020/24) and the technical staff. C T d S acknowledges the program Atraccion de Talento (Comunidad Autonoma de Madrid), reference 2020-T1/IND-19889. Some of the results presented in this work were derived from the research conducted under the F11024 Coordination Research Project., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Development and characterisation of a radiobiology proton beamline using radiochromic film dosimetry

  • Marques Coelho, Carina
  • de la Fuente Fernández, Pablo
  • Bononad, Paula
  • Viñals, Sílvia
  • Tavares de Sousa, Célia
  • Galaviz, Daniel
  • Herrera, Federico
  • del Monte-García, Inés
  • Sánchez Parcerisa, Daniel
  • Cortés-Llanos, Belén
Objective. To develop and optimise a dedicated low-energy proton beamline at the Centre for Micro-Analysis of Materials (CMAM, Madrid, Spain) for radiobiological applications. Approach. An automated irradiation system was implemented, integrating Gafchromic EBT3 radiochromic film dosimetry corrected for linear energy transfer dependent quenching and post-irradiation darkening. Dosimetric calibration was performed using multichannel analysis, and beam performance was systematically evaluated as a function of distance, raster scanning area, beam intensity and reproducibility. Main results. Optimal operating conditions were identified at moderate beam currents (⩽1nA) and scanning areas of 40 × 40 to 50 × 50mm2, yielding homogeneous dose distributions with reproducibility better than 8%. The dosimetric protocol demonstrated linearity across clinically relevant dose ranges and allowed a reliable correlation between irradiation parameters and absorbed dose. Proof-of-concept experiments on U-87 MG glioblastoma cells confirmed the system’s ability to deliver controlled and biologically effective proton exposures, as demonstrated by clonogenic survival assays. Significance. These results establish the CMAM implantation beamline as a robust and versatile platform for preclinical proton radiobiology, providing accurate dosimetric control and supporting investigations of relative biological efficacy. The system facilitates translational advances in proton radiobiology, bridging physical and biological studies in low-energy proton irradiation.