Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Asymmetrical magnetization processes induced by compositional gradients in ferromagnetic nanowires

  • Fernández González, Claudia
  • Berja, Alba
  • Álvaro Gómez, Laura
  • Mascaraque, Arantzazu
  • Aballe, Lucía
  • Pérez, L.
  • Ruiz Gómez, Sandra
  • Martín-Rubio, Carolina
  • Sanz, Ruy
Received 7 July 2023, Revised 6 December 2023, Accepted 4 January 2024, Available online 16 January 2024, Version of Record 16 January 2024., Electrodeposited nanowires are an excellent scenario to study and control magnetic domain wall motion in nanostructures. In particular, the introduction of local changes in composition during the growth procedure has been proven to be very efficient for controlling the magnetization dynamics. In this work, we show the possibility of introducing compositional gradients in FeNi electrodeposited nanowires by gradually changing the Fe/Ni ratio along their axis. These compositional gradients produce an asymmetrical landscape for domain wall motion which is reflected in asymmetrical magnetization processes under an applied magnetic field. By studying nanowires with different compositional gradients we were able to correlate composition and magnetic asymmetry. Our results pave the way towards full control of the movement of domain walls along the nanowires., We thank Prof. D. Gilbert for his suggestions and comments. This work has been partially funded by MCIN/AEI/10.13039/501100011033 through Projects PID2020-117024GB-C43, PID2020-115325GB-C31 and TED2021-130957B-C52 and by the Comunidad de Madrid through Project No. NANOMAGCOST-CM P2018/NMT-4321. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (Grants No. SEV-2016-0686 and No. CEX2020-001039-S). The ALBA in-house research program has supported the work. We thank the Spanish National Center of Electron Microscopy for Scanning Electron Microscopy measurements. Sandra Ruiz-Gómez acknowledges the support of the Alexander von Humboldt Foundation and the European Union under the Marie Skłodowska-Curie grant agreement 101061612., Peerreview
Docta Complutense
Publicación Artículo científico (JournalArticle)

Nano-patterning using ultra-thin alumina membranes

  • Fernández González, Claudia
  • Ruiz Gómez, Sandra
  • Arché Núñez, Ana
  • Pérez García, Lucas
  • Tavares de Sousa, Célia
With the mass production of well-controlled and low-cost nanostructures on the horizon, considerable attention has been given to porous anodic alumina (PAA) templates to assist in the fabrication of both individual and ordered nanostructured objects – particles, rods, wires, and holes – with applications in electronics, data storage, bioengineering, and nanomedicine. The fabrication of free-standing PAA templates, several microns thick, as well as their applications, have been largely described in the literature. In recent years, research has focused on the synthesis of ultra-thin anodic alumina membranes (UTAMs), making them compatible with top-down fabrication and large-scale production. The ability to obtain these nanostructures on different surfaces, including glass, silicon wafers, or flexible substrates, extends their range of applications, enabling the integration of nanostructured materials on top of thin layers and allowing for the precise tuning of the physical and chemical properties of the materials. This review focuses on this new and promising nanopatterning approach to fabricate large areas of ordered nanostructures using UTAMs as patterning masks. We report the most recent advances in the synthesis of UTAMs, focusing on two different approaches: in-situ anodization of thin aluminum films on various substrates and deterministic transfer of UTAMs onto a desired substrate. In the first case, we collect information regarding substrates, buffer layers, growth of Al films, anodization, and the post-treatment of the UTAMs. In the second case, we focus the review on the synthesis of UTAMs and, especially, on the transfer process to the substrate. For both methods, we compare the results regarding the nanostructure’s self-organization and the control of size, shape, and spacing. Finally, we will review several applications in which the use of UTAMs plays a key role in the performance of nanostructured devices.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Interplay between structure and interfacial interactions in Fe‐Gd synthetic ferrimagnets

  • González García, Álvaro
  • Álvarez Chico, Alejandro
  • Obando Guevara, Jairo
  • Gallego, Silvia
  • Atxitia, Unai
  • Cojocariu, Iulia
  • Jugovac, Matteo
  • Menteş, Tevfik Onur
  • Locatelli, Andrea
  • Mascaraque Susunaga, Arantzazu
  • González Barrio, Miguel Ángel
Transition metal–rare earth compounds are promising synthetic ferrimagnets for next-generation spintronic devices, where magnetic domain structure and thermal evolution are key to performance. We studied ultrathin Fe–Gd ferrimagnets grown epitaxially on W(110) by atomic layer deposition, combining element-resolved magnetic microscopy with structural characterization. Comparing Gd/Fe and Fe/Gd bilayers with homogeneous Fe1 − xGdx alloys, we find that Curie temperature (Tc) and domain behavior are governed primarily by crystallinity and interfacial coupling. In crystalline Gd/Fe, the Gd layer remains ferromagnetic up to ∼500 K, far above its bulk Tc, due to strong interfacial coupling. In contrast, poor crystallinity of the Fe layer in Fe/Gd suppresses Fe magnetic order, yielding a reduced common Tc of ∼325 K, similar to the homogeneous alloy (Tc ∼ 345 K). Atomistic spin simulations capture these trends and isolate the role of disorder. Together, these results demonstrate how structural control can be used to tune Curie and compensation temperatures in ultrathin ferrimagnetic heterostructures for ultrafast, energy-efficient spintronic applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Topological analysis and experimental control of transformations of domain walls in magnetic cylindrical nanowires

  • Álvaro Gómez, Laura
  • Hurst, J
  • Hegde, S
  • Ruiz-Gómez, Sandra
  • Pereiro, Eva
  • Aballe, Lucía
  • Toussaint, J. C.
  • Pérez García, Lucas
  • Aurelien, Masseboeuf
  • Thirion, C
  • Fruchart, Olivier
  • Gusakova, Daria
Topology is a powerful tool for categorizing magnetization textures by defining a topological index in both two-dimensional (2D) systems, such as thin films or curved surfaces, and in 3D bulk systems. In the emerging field of 3D nanomagnetism, both volume and surface topological numbers must be considered, requiring the identification of a proper global topological invariant to support categorization. Here we consider domain walls in cylindrical nanowires as an excellent playground for 3D nanomagnetic systems, excited by a charge current, that generates an Œrsted field. We first provide experimental evidence of previously unreported domain-wall transformations of topology occurring at the nanosecond timescale. We investigate these transformations with micromagnetic simulations, tracking both bulk and surface topological signatures. We demonstrate a topological invariant combining both signatures, while the topological charge varies from bulk to surface during the dynamics. The experimental change of topology is reproduced when the pulse duration matches the timescale of the internal transformations of the wall, and the current is switched off before the transformation is complete. We expect that the topological categorization and dynamical exploitation apply to any 3D nanomagnetic system.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Chemistry of Spinel Ferrite Nanoparticle Nucleation, Crystallization, and Growth

  • Andersen, Henrik L.
  • Granados-Miralles, Cecilia
  • Jensen, K.M.I.
  • Saura-Múzquiz, M.
  • Christensen, M.
The nucleation, crystallization, and growth mechanisms of MnFe2O4, CoFe2O4, NiFe2O4, and ZnFe2O4 nanocrystallites prepared from coprecipitated transition metal (TM) hydroxide precursors treated at sub-, near-, and supercritical hydrothermal conditions have been studied by in situ X-ray total scattering (TS) with pair distribution function (PDF) analysis, and in situ synchrotron powder X-ray diffraction (PXRD) with Rietveld analysis. The in situ TS experiments were carried out on 0.6 M TM hydroxide precursors prepared from aqueous metal chloride solutions using 24.5% NH4OH as the precipitating base. The PDF analysis reveals equivalent nucleation processes for the four spinel ferrite compounds under the studied hydrothermal conditions, where the TMs form edge-sharing octahedrally coordinated hydroxide units (monomers/dimers and in some cases trimers) in the aqueous precursor, which upon hydrothermal treatment nucleate through linking by tetrahedrally coordinated TMs. The in situ PXRD experiments were carried out on 1.2 M TM hydroxide precursors prepared from aqueous metal nitrate solutions using 16 M NaOH as the precipitating base. The crystallization and growth of the nanocrystallites were found to progress via different processes depending on the specific TMs and synthesis temperatures. The PXRD data show that MnFe2O4 and CoFe2O4 nanocrystallites rapidly grow (typically <1 min) to equilibrium sizes of 20-25 nm and 10-12 nm, respectively, regardless of applied temperature in the 170-420 °C range, indicating limited possibility of targeted size control. However, varying the reaction time (0-30 min) and temperature (150-400 °C) allows different sizes to be obtained for NiFe2O4 (3-30 nm) and ZnFe2O4 (3-12 nm) nanocrystallites. The mechanisms controlling the crystallization and growth (nucleation, growth by diffusion, Ostwald ripening, etc.) were examined by qualitative analysis of the evolution in refined scale factor (proportional to extent of crystallization) and mean crystallite volume (proportional to extent of growth). Interestingly, lower kinetic barriers are observed for the formation of the mixed spinels (MnFe2O4 and CoFe2O4) compared to the inverse (NiFe2O4) and normal (ZnFe2O4) spinel structured compounds, suggesting that the energy barrier for formation may be lowered when the TMs have no site preference. © 2024 The Authors. Published by American Chemical Society., The authors are grateful for the obtained beamtimes at beamline I711, MAXlab synchrotron radiation source, Lund University, Sweden; and beamline P02.1, PETRA III, DESY, Hamburg, Germany (ref. I-20150335 EC). Hanns-Peter Liermann, Jozef Bednarcik, Ann-Christin Dippel, Carsten Gundlach, Dorthe Haase, Diana Thomas, and Francisco Martinez are thanked for their support during the respective beamtimes. This work was financially supported by the Danish National Research Foundation (Center for Materials Crystallography, DNRF93), Innovation Fund Denmark (Green Chemistry for Advanced Materials, GCAM-4107-00008B), Independent Research Fund Denmark (Small and Smart Magnet Design) and the Danish Center for Synchrotron and Neutron Science (DanScatt), The Spanish Ministry of Universities (Ministerio de Universidades) and the European UnionyNextGenerationEU through a Maria Zambrano attraction of international talent fellowship grant, and Comunidad de Madrid, Spain, through an "Atraccion de Talento Investigador" fellowship (2020-T2/IND-20581). This project has received funding from the European Union's Horizon Europe research and innovation programme under project No. 101063369 (OXYPOW). C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". C.G.-M. and M.S.-M. also acknowledge support from the Spanish Ministry of Science and Innovation through Grant TED2021-130957B-C51 and TED2021-130957B-C52 (NANOBOND) funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged., Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nano-patterning using ultra-thin alumina membranes

  • Fernández-González, C.
  • Ruiz-Gómez, S.
  • Arché-Núñez, A.
  • Pérez, L.
  • Tavares de Sousa, C.T.
With the mass production of well-controlled and low-cost nanostructures on the horizon, considerable attention has been given to porous anodic alumina (PAA) templates to assist in the fabrication of both individual and ordered nanostructured objects – particles, rods, wires, and holes – with applications in electronics, data storage, bioengineering, and nanomedicine. The fabrication of free-standing PAA templates, several microns thick, as well as their applications, have been largely described in the literature. In recent years, research has focused on the synthesis of ultra-thin anodic alumina membranes (UTAMs), making them compatible with top-down fabrication and large-scale production. The ability to obtain these nanostructures on different surfaces, including glass, silicon wafers, or flexible substrates, extends their range of applications, enabling the integration of nanostructured materials on top of thin layers and allowing for the precise tuning of the physical and chemical properties of the materials. This review focuses on this new and promising nanopatterning approach to fabricate large areas of ordered nanostructures using UTAMs as patterning masks. We report the most recent advances in the synthesis of UTAMs, focusing on two different approaches: in-situ anodization of thin aluminum films on various substrates and deterministic transfer of UTAMs onto a desired substrate. In the first case, we collect information regarding substrates, buffer layers, growth of Al films, anodization, and the post-treatment of the UTAMs. In the second case, we focus the review on the synthesis of UTAMs and, especially, on the transfer process to the substrate. For both methods, we compare the results regarding the nanostructure's self-organization and the control of size, shape, and spacing. Finally, we will review several applications in which the use of UTAMs plays a key role in the performance of nanostructured devices. © 2024 The Authors, Funded by the European Union through project BEETHOVEN (101129912). Partially funded also by MCIN/AEI, Spain/10.13039/501100011033 through Projects PID2020-117024GB-C43, PID2022-141080OB-C22 and TED2021-130957B-C52. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D, Spain (Grant SEV-2016-0686). A. A.-N. and S. R.-G. acknowledge funding through the Advanced Materials programme supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat de Catalunya, Spain . C.T.S. acknowledges the program Atraccion de Talento (CAM), ref. 2020-T1/IND-19889. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the other granting authorities. Neither the European Union nor the granting authorities can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Unveiling the 3D Spin Texture of Nanowires Using Integrated Microscopy Techniques

  • Fernández-González, Claudia
  • Álvaro-Gómez, Laura
  • Fernández-García, Laura
  • Morales-Fernández, Pamela
  • Gómez-Cruz, Lucía
  • Khaliq, Muhammad W.
  • Donnelly, Claire
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Pereiro, Eva
  • Martínez, Eduardo
  • Jaafar, Miriam
  • Aballe, Lucía
  • Pérez, Lucas
  • Ruiz-Gómez, Sandra
This study integrates multiple microscopy techniques to investigate the effect of introducing axial compositional gradients on the magnetic properties of Fe–Ni ferromagnetic nanowires. We study the chemical structure of the nanowires using photoemission electron microscopy and transmission (X-ray and electron) microscopy. We explore the magnetic properties through magnetic force microscopy, complemented by micromagnetic simulations, and we characterize the 3D magnetization vector by measuring magnetic circular dichroism using X-ray microscopies. We observe that variations in the Fe/Ni ratio induce localized magnetic curling in Fe-rich regions, while Ni-rich segments predominantly exhibit axial magnetization, demonstrating how compositional gradients can control magnetic domain configurations on the nanoscale. Our results highlight the value of multimodal imaging for uncovering the interplay among structural, chemical, and magnetic properties in complex nanostructures. These findings represent a significant step toward the manipulation of magnetic domains in nanowires, which is essential for future devices based on 3D nanomagnetic architectures., Partially funded by MCIN/AEI/10.13039/501100011033 through projects PID2020-117024GB-C43, TED2021-130957B-C52, and TED2021-130957B-C55 and by Comunidad de Madrid through project TEC-2024/TEC-380 (Mag4TIC). The authors acknowledge funding from the Max Planck Society Lise Meitner Excellence Program. M.W.Q. and S.R.-G. acknowledge funding through the Advanced Materials programme supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat de Catalunya. Electron microscopy observations were carried out at the Centro Nacional de Microscopía Electrónica at UCM (ICTS ELECMI). The X-ray microscopy experiments were performed at CIRCE and MISTRAL beamlines at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Non-conventional resonant behavior of an unconfined magnetic domain wall in a permalloy strip

  • Fernández García, Laura
  • Ruiz Gómez, Sandra
  • Guerrero, Rubén
  • Guedas, Rodrigo
  • Aroca, Claudio
  • Pérez García, Lucas
  • Prieto, José L.
  • Muñoz, Manuel
The resonant dynamic of a magnetic domain wall in a permalloy microstrip has been investigated using an innovative experimental setup that enables a simultaneous measurement of the ferromagnetic resonance and the magnetoresistance. The resonance frequency associated with the presence of the magnetic domain wall increases linearly with the external magnetic field in the range of fields where the domain wall is present in the microstrip. This linear behavior is unusual in a domain wall and not related to the standard resonant modes of a magnetic domain wall, such as breathing, twisting, or translational modes. The slope of this linear dependency is 1.38 GHz/mT, which is an incredibly large value and allows the detection of very small changes in the external magnetic field. This linear behavior opens a path for developing a highly tunable radio frequency oscillator or a magnetic sensing device where the presence of an external field is detected via small variations in the resonant frequency of the domain wall.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electronic structure of Gd/W(110): from one atomic layer to bulk

  • González García, Álvaro Antonio
  • Álvarez Chico, Alejandro
  • Aramburu Merino, Nekane
  • Obando Guevara, Jairo
  • Gallego, Silvia
  • Atxitia, Unai
  • Cojocariu, Iulia
  • Jugovac, Matteo
  • Menteş, Tevfik Onur
  • Locatelli, Andrea
  • Mascaraque Susunaga, Arantzazu
  • González Barrio, Miguel Ángel
We investigate the growth, crystalline and electronic structure of ultrathin gadolinium (Gd) films deposited on a W(110) substrate, using a multi-modal approach that combines low energy electron diffraction (LEED) and microscopy (LEEM), together with laterally- and angle resolved photoemission spectroscopy (ARPES). We focus on the evolution from the monolayer to bulk-like behavior. The Gd lattice constant relaxes to its bulk value for a thickness of 3 Gd atomic layers (ML). ARPES measurements, combined with ab initio calculations, reveal a systematic progression of the Gd-derived electronic states with increasing thickness, with clear bulk-like features already at thicknesses of 3 ML, and a reduced influence of the substrate. This study provides a comprehensive ARPES and LEED investigation of Gd/W(110) across the ultrathin thickness range, filling a significant gap in the understanding of dimensional crossover in rare-earths. Our results shed new light on how the interplay between reduced dimensionality and substrate interaction shapes the behavior of ultrathin magnetic films, offering a model platform for exploring quantum size effects and correlation-driven phenomena in low-dimensional 4f systems.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Unveiling the 3D spin texture of nanowires using integrated microscopy techniques

  • Fernández González, Claudia
  • Álvaro Gómez, Laura
  • Fernández García, Laura
  • Morales Fernández, Pamela
  • Gómez Cruz, Lucía
  • Khaliq, Muhammad Waqas
  • Donnelly, Claire
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Pereiro, Eva
  • Martínez, Eduardo
  • Jaafar, Miriam
  • Aballe, Lucía
  • Pérez García, Lucas
  • Ruiz Gómez, Sandra
This study integrates multiple microscopy techniques to investigate the effect of introducing axial compositional gradients on the magnetic properties of Fe–Ni ferromagnetic nanowires. We study the chemical structure of the nanowires using photoemission electron microscopy and transmission (X-ray and electron) microscopy. We explore the magnetic properties through magnetic force microscopy, complemented by micromagnetic simulations, and we characterize the 3D magnetization vector by measuring magnetic circular dichroism using X-ray microscopies. We observe that variations in the Fe/Ni ratio induce localized magnetic curling in Fe-rich regions, while Ni-rich segments predominantly exhibit axial magnetization, demonstrating how compositional gradients can control magnetic domain configurations on the nanoscale. Our results highlight the value of multimodal imaging for uncovering the interplay among structural, chemical, and magnetic properties in complex nanostructures. These findings represent a significant step toward the manipulation of magnetic domains in nanowires, which is essential for future devices based on 3D nanomagnetic architectures.