Pasar al contenido principal

RECUBRIMIENTOS Y PROCEDIMIENTOS CON IONES DIRIGIDOS A INSTRUMENTACION ESPACIAL EN EL UV Y UV LEJANO

PID2019-105156GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Effects of swift heavy ions on metal nanoparticles embedded in silica: using linearly polarized light to monitor the elongation kinetics

  • Borrell Grueiro, Olivia
  • Mendez González, Yanela
  • Crespillo, Miguel L.
  • Olivares, José
  • Ramos Ramos, Diego J.
  • Junquera González, María Elena
  • Bañares Morcillo, Luis
  • Guerrero Martínez, Andrés
  • Rivera, Antonio
  • Peña Rodríguez, Ovidio
The elongation of metallic nanoparticles (NPs) embedded in a dielectric matrix after irradiation with swift heavy ions is a phenomenon that has been known for several years. However, the precise mechanism behind this deformation process is still not fully understood, primarily due to the dearth of information during intermediate stages of deformation. In this study, we report the continuation of our previous work [Peña-Rodriguez et al., Sci. Rep. 7(1), 922 (2017)], exploiting the strong dependence of the localized surface plasmon resonance on the aspect ratio of elongated metal NPs to study the elongation kinetics in situ. In situ optical absorption spectra were measured using a polarizing beam splitter to separate the longitudinal and transverse plasmon modes of the anisotropic NPs. Then, the detailed geometrical and compositional parameters were determined from a fit of these spectra. The use of linearly polarized light allowed for a more accurate analysis of the elongation kinetics, particularly useful in the first stages, where longitudinal and transverse modes overlap.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mirrors for space telescopes: degradation issues

  • Garoli, Denis
  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
  • Corso, Alain J.
  • Proietti Zaccaria, Remo
  • Pelizzo, Maria G.
23 pags., 5 figs., Mirrors are a subset of optical components essential for the success of current and future space missions. Most of the telescopes for space programs ranging from earth observation to astrophysics and covering the whole electromagnetic spectrum from x-rays to far-infrared are based on reflective optics. Mirrors operate in diverse and harsh environments that range from low-earth orbit to interplanetary orbits and deep space. The operational life of space observatories spans from minutes (sounding rockets) to decades (large observatories), and the performance of the mirrors within the mission lifetime is susceptible to degrading, resulting in a drop in the instrument throughput, which in turn affects the scientific return. Therefore, the knowledge of potential degradation mechanisms, how they affect mirror performance, and how to prevent them is of paramount importance to ensure the long-term success of space telescopes. In this review, we report an overview of current mirror technology for space missions with a focus on the importance of the degradation and radiation resistance of coating materials. Special attention is given to degradation effects on mirrors for far and extreme UV, as in these ranges the degradation is enhanced by the strong absorption of most contaminants., JIL acknowledges funding by Ministerio de Ciencia e Innovación, Gobierno de España (PID2019-105156GB-I00). LRM appreciates the support from the Center for Research and Explorationin Space Science and Technology II (CRESST II) program. MGP acknowledges ASI-INAF I/013/12/0 Solar Orbiter, METIS instrument European Space Agency (contract no. 4000122836/18/NL/PS/gp), Radiation Testing of Optical Coatings for Space.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the deposition parameters of MgF2/LaF3 narrowband reflective FUV multilayers

  • López-Reyes, Paloma
  • Perea-Abarca, Belén
  • Honrado-Benítez, Carlos
  • Gutiérrez-Luna, Nuria
  • Ríos-Fernández, Á.
  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
14 pags., 7 figs., 3 tabs., The development of efficient dielectric coatings in the far UV (FUV) is demanded for upcoming space instrumentation, such as LUMOS (LUVOIR Ultraviolet Multi-Object Spectrograph) in LUVOIR mission, among other applications. Multilayers (MLs) based on MgF2 and LaF3 have been developed in the last decades for the 157-nm and 193-nm lithography, demonstrating excellent optical properties. Yet, the deposition procedure to obtain coatings with optimal performance has not been fully detailed in the open literature, such as the dependence of ML performance with deposition and post-deposition temperature. This research investigates the effect of the substrate deposition temperature of MgF2/LaF3 ML coatings prepared by thermal evaporation on FUV reflectance, stress, roughness, as well as the performance of the coatings and their evolution over time. The relatively higher expansion coefficient of these two fluorides in comparison with fused silica substrates results in a large tensile stress for coatings deposited at high temperature and later cooled down to room temperature. Such stress may result in coating cracking and delamination. A compromise deposition temperature of ∼240°C and 13 bilayers was found for optimal ML reflectance peaked at ∼160 nm before cracks are generated. Above this deposition temperature, stress increased, which resulted in an extension of the cracked area and in a slight roughness increase and FUV reflectance decrease. MLs that were deposited at room temperature and later annealed resulted in a similar reflectance and stress to those of hot-deposited coatings for a given temperature., Ministerio de Economía, Industria y Competitividad, Gobierno de España (BES-2017-081909, ESP2016-76591-P, PID2019-105156GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Far UV-enhanced Al mirrors with a Ti seed film

  • Larruquert, Juan Ignacio
  • Honrado-Benítez, Carlos
  • Gutiérrez-Luna, Nuria
  • Ríos-Fernández, Á.
  • López-Reyes, Paloma
7 pags., 4 figs., A Ti seed film is investigated towards improving the far UV reflectance of Al/MgF2 mirrors. Samples were initially coated with a Ti film in half of the area and they were later coated in the full area with an Al film and protected with MgF2. All materials were deposited by evaporation. Samples were prepared with the MgF2 layer deposited either at room temperature (RT) or at 225°C. A 3-nm thick Ti seed film was seen to significantly increase the reflectance of Al/MgF2 mirrors at the well-known reflectance dip centered at ∼160 nm; this was attributed to a reduction of short-range surface roughness at the Al/MgF2 interface, which is responsible for radiation absorption through surface-plasmon (SP) coupling. SP absorption was more efficiently reduced with a Ti seed film on samples fully deposited at RT. A Ti seed film as thin as 1 nm provided the largest SP absorption reduction, and the SP dip was almost completely removed., Agencia Estatal de Investigación (PID2019-105156GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current status and future developments of the ion beam facility at the centre of micro-analysis of materials in Madrid

  • Redondo Cubero, Andres
  • García Borge, María José
  • Gordillo, N.
  • Gutiérrez, P.C.
  • Olivares Villegas, José
  • Pérez-Casero, R.
  • Ynsa, M. D.
16 pags., 6 figs., We report on the current status of the ion beam laboratory of the Centre of Micro-Analysis of Materials at the Autonomous University of Madrid. The 5 MV accelerator facility provides MeV ion beams of any stable element. Six main beam lines are under operation, allowing the analysis and modification of materials through ion beam methods. Although the most demanded ions are H and He for standard Rutherford backscattering spectrometry and particle-induced X-ray emission experiments, many other analytical techniques and specific set-ups are available for users. The facility especially highlights for the use of high-energy heavy ions and microbeams, with important applications in material science, optics and electronics, biology, cultural heritage, and astrophysics. Ongoing upgrades of the facility are oriented to improve the quality of the service for external users and to face new scientific and technological challenges in areas such as advanced materials, space, energy and health., We acknowledge funding from EU COST action CA17126, national projects ENE2016-80788-05-2-R, CTQ-2017-84309-C2-2-R, FPA2017-87568-P, and PID2019-104390BG-I00, PID2019-105156GB-I00, and local projects S2017/BMD-3888, TransNanoAvansens (P2018/NMT4349), TechnofusionIII (S2018/EMT4437) from Comunidad Autónoma de Madrid. ARC acknowledges Ramón y Cajal program under contract RYC-2015-18047.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Far-UV reflectance and stress of narrowband AlF3/LaF3 multilayers

  • López-Reyes, Paloma
  • Honrado-Benítez, Carlos
  • Gutiérrez-Luna, Nuria
  • Ríos-Fernández, Á.
  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
14 pags., 9 figs., 3 tabs., Upcoming space instrumentation, such as LUMOS (LUVOIR Ultraviolet MultiObject Spectrograph) in LUVOIR (Large Ultraviolet Optical Infrared Surveyor) mission, demands efficient narrowband coatings centered in the far UV (FUV). Narrowband FUV coatings can be prepared with all-dielectric multilayers (MLs) based on two fluorides. This research evaluates the performance of AlF3/LaF3 FUV MLs prepared by thermal evaporation and compares this performance with MgF2/LaF3 MLs, which were previously investigated. FUV reflectance, stress, and the influence of substrate materials have been investigated, along with ML stability over time when stored in a desiccator. Coatings were deposited both on fused silica and on CaF2 crystals, two common optical substrates. AlF3/LaF3 MLs exhibited reduced stress compared with MgF2/LaF3 MLs, resulting in a larger thickness threshold before crack generation. This enables preparing MLs with more layers and hence with higher performance. AlF3/LaF3 MLs underwent lower reflectance decay over time compared with MgF2/LaF3 MLs. Fresh MLs centered at ~160 nm displayed a peak reflectance close to 100%, and most of the AlF3/LaF3 MLs kept a reflectance of 99% after several months of storage. The bandwidth of AlF3/LaF3 MLs for a given number of layers was found to be somewhat larger than for MgF2/LaF3 MLs., Agencia Estatal de Investigación (BES-2017-081909, ESP2016- 76591-P, PID2019-105156GB-I00); Ministerio de Economía, Industria y Competitividad, Gobierno de España (BES-2017-081909)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Far UV narrowband mirrors tuned at H Lyman α

  • López-Reyes, Paloma
  • Gutiérrez-Luna, Nuria
  • Honrado-Benítez, Carlos
  • Ríos-Fernández, Á.
  • Enríquez-Pérez, Esther
  • Chavero Royan, José
  • Espinosa-Yáñez, Lucía
  • Rodríguez-de Marcos, Luis V.
  • Larruquert, Juan Ignacio
17 pags., 9 figs., 2 tabs., Imaging at H Ly-α (121.6 nm), among other spectral lines in the short far UV (FUV), is of high interest for astrophysics, solar, and atmosphere physics, since this spectral line is ubiquitously present in space observations. However, the lack of efficient narrowband coatings has mostly prevented such observations. Present and future space observatories like GLIDE and the IR/O/UV NASA concept, among other applications, can benefit from the development of efficient narrowband coatings at Ly-α. The current state of the art of narrowband FUV coatings lacks performance and stability for coatings that peak at wavelengths shorter than ∼135 nm. We report highly reflective AlF3/LaF3 narrowband mirrors at Ly-α prepared by thermal evaporation, with, to our knowledge, the highest reflectance (over 80%) of a narrowband multilayer at such a short wavelength obtained so far. We also report a remarkable reflectance after several months of storage in different environments, including relative humidity levels above 50%. For astrophysics targets in which Ly-α may mask a close spectral line, such as in the search for biomarkers, we present the first coating in the short FUV for imaging at the OI doublet (130.4 and 135.6 nm), with the additional requirement of rejecting the intense Ly-α, which might mask the OI observations. Additionally, we present coatings with the symmetric design, aimed to observe at Ly-α, and reject the strong OI geocoronal emission, that could be of interest for atmosphere observations., Agencia Estatal de Investigación (BES-2017-081909, ESP2016-76591-P, PID2019-105156GB-I00); Ministerio de Economía y Competitividad (BES-2017-081909)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct measurement of the extinction coefficient by differential transmittance

  • Larruquert, Juan Ignacio
  • Gutiérrez-Luna, Nuria
  • Honrado-Benítez, Carlos
  • López-Reyes, Paloma
  • Ríos-Fernández, Álvaro
  • Pérez-García, Manuel
  • Rodríguez-de Marcos, Luis V.
15 pags., 8 figs., 1 tab., A new procedure to measure the extinction coefficient k of film materials that are relatively transparent is presented. This procedure does not require the use of an optical-constant model or the knowledge of extra physical properties of the material, such as the specific heat capacity. It involves preparing a sample with two areas, at least one of them coated with the film, whereas the other may remain uncoated or may be coated with a different thickness of the same material. The differential transmittance between the two sample areas is shown to be proportional to k of the film material in the following measurement conditions: the incident light is p polarized and it impinges at the film material Brewster angle. The differential transmittance is obtained with a single measurement by making the light beam or the sample to oscillate with respect to one another and by using a lock-in amplifier; for normalization purposes, the transmittance in one of the sample areas is also measured. The proportionality factor between the normalized differential transmittance and k only involves the wavelength, the film thickness, and the Brewster angle. The knowledge of the film Brewster angle requires that the film refractive index (n) is measured beforehand; this can be performed with standard procedures, such as ellipsometry, since such techniques are efficient at measuring n of a transparent material, but are inefficient at measuring a small k. The procedure is exemplified with the calculation of k in the far ultraviolet of AlF3 films deposited by evaporation. The dependence of the uncertainty of k obtained with this procedure is analyzed in terms of the uncertainty of the film n, of wavelength, and of the degree of polarization of the incident beam. The selection of a substrate with similar n to the film material is also discussed. The uncertainties involved with the present procedure were analyzed for a specific example and an uncertainty of 2 × 10-5 in k calculation is considered feasible., NGL acknowledges, for her technician position, the grant PTA2021-019935-I funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. Grant PDC2022-133788-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Grant PID2019-105156GBI00 funded by MCIN/AEI/10.13039/501100011033. LRM acknowledges the support received from the CRESST II cooperative agreement supported by NASA under award number 80GSFC21M0002. A patent application with the procedure here presented was filed to Spanish Oficina Española de Patentes y Marcas in 2021 under No. 202130475., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multilayer beamsplitter polarizers for key UV-FUV spectral lines of solar polarimetry

  • Gutiérrez-Luna, Nuria
  • Capobianco, Gerardo
  • Malvezzi, Andrea Marco
  • Honrado-Benítez, Carlos
  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
  • Giglia, Angelo
  • Mahne, Nicola
  • Nannarone, Stefano
  • Fineschi, Silvano
14 pags., 10 figs., 3 tabs., Multilayer beamsplitter polarizers have been developed for improved solar polarimetry at key spectral lines. The advantage of beamsplitter polarizers is that a single device separates s from p polarization; this helps minimize attenuation and enables a more compact and lighter polarimeter, which is important for space instruments. Polarizers based on Al/AlF3 multilayers were prepared for both C IV (155 nm) and Mg II (280 nm) lines, and based on Al/MgF2 multilayers for H Lyman ¿ line (121.6 nm). Polarizers were designed to mainly reflect (transmit) s (p) polarization. Beamsplitter performance and throughput are shown to compare advantageously with polarizers in the literature. Beamsplitter polarizers kept a valuable performance after several years of ageing., Ministerio de Ciencia e Innovación (PID2019-105156GB-I00 and ESP2016-76591-P); National Programme for Research, Subdirección General de Proyectos de Investigación. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Narrowband mirrors tuned at the desired far UV spectral lines

  • Larruquert, Juan Ignacio
  • López-Reyes, Paloma
  • Gutiérrez-Luna, Nuria
  • Honrado-Benítez, Carlos
  • Ríos-Fernández, Álvaro
  • Rodríguez de Marcos, Luís
7 pags., 5 figs., The far ultraviolet (FUV, 100-200 nm wavelengths) contains plenty of spectral lines for key targets of the astrophysics, solar physics, and atmospheric physics communities. Imaging at spectral lines like O VI (103.2, 103.8 nm), H Lyman ¿ (121.6 nm), N V (123.8, 124.2 nm), O I (130.4, 135.6 nm), C IV (155 nm), etc., will enable address important targets for the above communities, which is reinforced by the very limited access to such imaging so far. Hence LUMOS instrument of LUVOIR (Large Ultraviolet Optical Infrared Surveyor, large space telescope concept) proposed imaging emission features, such as outer planet auroras at H2 Werner bands to map CH4 absorption, for which LUMOS would use a FUV imaging channel operating with narrow- and medium- band filters. The GOLD group has been investigating narrowband mirrors that are tuned at the desired FUV spectral line(s) as candidate coatings for imaging space instrumentation. It developed Al/LiF/SiC/LiF coatings that can be tuned at the shortest end of the FUV, 100 nm, which enables mirrors peaked at H Lyman ß (102.6 nm) or at the O VI doublet. Furthermore, such coatings can be designed to reject the ubiquitous H Lyman ¿, where they can be made to reflect below 1%. The group is also investigating on narrowband mirrors based on multilayers that alternate two fluorides, such as AlF3/LaF3. These coatings can be tuned at the desired FUV wavelength longer than 120 nm. The proceeding presents a summary of the main results on these two sorts of coatings, which can cover the full FUV with narrowband MLs., We acknowledge Agencia Estatal de Investigación for funding this research, Refs. BES-2017-081909 and PID2019-105156GB-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the effects of the surface and in-depth nanostructure on the far-UV optical reflectance of thin fluoride multilayer coatings

  • López-Reyes, Paloma
  • Enríquez-Pérez, Esther
  • Crespillo, M. L.
  • Rodríguez-de Marcos, L. V.
  • Olivares Villegas, José
  • Larruquert, Juan Ignacio
14 pags., 9 figs., 6 tabs., Developing high-quality optical components for far ultraviolet (FUV) spectrum is gaining significance in space observations. Optical elements designed for a narrowband FUV response rely on coatings made of thin multilayers (MLs), alternating between two materials with low optical absorption and significantly contrasting refractive indices. Recent research shows that (AlF3/LaF3) systems outperform (MgF2/LaF3) coatings in FUV optical reflectance due to two critical factors: 1) AlF3′s lower refractive index compared to MgF2, and 2) structural properties resulting from a trade-off between the number of bilayers, contributing to higher reflectance, and the tendency for roughness to increase with the total coating thickness, limiting FUV optical performance. This study conducts a comprehensive examination of the nano-microstructure of these MLs, using three techniques: AFM for surface characterization, cross-sectional SEM micrographs with backscattered electrons, and Rutherford Backscattering Spectrometry (RBS) for in-depth structural and compositional analysis. A strong correlation is observed between roughness, grain size, composition, and intermixing, impacting the optical response in the FUV range. Nanometer-scale intermixing between layers is estimated using RBS. These findings provide a foundation for modeling FUV optical reflectance in MLs, enabling the optimization of their design through materials engineering to achieve more efficient optical devices for FUV applications in space observations., The authors would like to acknowledge the funding from the regional government of Madrid through the TechnoFusion (III)-CM (S2018/EMT-4437) program, co-financed with Structural Funds (ERDF and ESF), and from the Grant PDC2022-133788-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union extGenerationEU/PRTR, and Grant PID2019-105156 GB-I00 funded by MCIN/AEI/10.13039/501100011033. P.L.R. acknowledges support from Agencia Estatal de Investigacion (BES-2017-081909, Grant PID2019-105156 GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe). P.L.R. acknowledges R. Álvaro and “Instituto de micro y nanotecnología” (CSIC) for AFM and SEM/BSE measurements. M.L.C. acknowledges financial support from the research project “Captacion de Talento UAM” Ref: #541D300 supervised by the Vice-Chancellor of Research of Universidad Autonoma de Madrid (UAM). L.R.M. acknowledges the support of CRESST II cooperative agreement, which is supported by NASA under award number 80GSFC21M0002. The authors acknowledge the support from The Centro de Microanalisis de Materiales (CMAM)-Universidad Autónoma de Madrid, for the beam time proposal (Interface abruptness evaluation on MgF2/LaF3 and AlF3/LaF3 vacuum UV multilayers using IBA techniques) with code STD012/23, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of hollow silver nanoparticles under irradiation with ultrashort laser pulses

  • Sánchez-Pérez, F.
  • Borrell-Grueiro, O.
  • Casasnovas-Melián, A.
  • Ramos-Ramos, D.J.
  • Guerrero-Martínez, A.
  • Bañares, Luis
  • Prada, A.
  • Valencia, F.J.
  • Kohanoff, J.
  • Crespillo, M.L.
  • Olivares Villegas, José
  • Rivera, A.
  • Peña-Rodríguez, O.
9 pags., 5 figs., We have studied the formation of cavities in spherical silver nanoparticles embedded in silica, irradiated with fs laser pulses that produce an intense electronic excitation. Experimentally determined aspect ratio, i.e. the ratio between the cavity and nanoparticle size, for hollow structures formed under different irradiation conditions shows a very good agreement with values obtained by means of atomistic simulations. According to the predictions of the atomistic model, one can produce at will hollow silver nanoparticles with cavities of tailored dimensions, having an accurate control. Hence, laser irradiation can be used to control and design the optical response by tuning the localized surface plasmon resonances of the hollow nanoparticles., This work was partially funded by the regional government of Madrid through the TechnoFusion (III)-CM (S2018/EMT-4437) program, co-financed with Structural Funds (ERDF and ESF) and by the Projects PID2019-105325RB-C32 (Radiafus-5), PID2019-105156GB-I00, PID2021- 123228NB-I00 and PDC2022-133788-I00, funded by the Ministerio de Ciencia e Innovación of Spain. This work has also been partially funded by the Eurofusion consortium (EH150531176). JK was supported by the Beatriz Galindo Program (BEAGAL18/00130) from the Ministerio de Educación y Formación Profesional of Spain. This work was partially funded by Comunidad de Madrid through the Convenio Plurianual with Universidad Politécnica de Madrid in its line of action Apoyo a la realización de proyectos de I + D para investigadores Beatriz Galindo, within the framework of V PRICIT (V Plan Regional de Investigación Científica e Innovación Tecnológica). AP and FJV were supported by FONDECYT grant 3190123. MLC was supported by the research project “Captación de Talento UAM” Ref: #541D300 supervised by the Vice-Chancellor of Research of Universidad Autónoma de Madrid (UAM). The research leading to this result has been supported by the RADIATE project under the Grant Agreement 824096 from the EU Research and Innovation programme HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Far UV coatings for liquid-Ar time projection chambers

  • Larruquert, Juan Ignacio
  • López-Reyes, Paloma
  • Gutiérrez-Luna, Nuria
  • Honrado-Benítez, Carlos
  • Pesudo, V.
8 pags., 3 figs., 1 tab. -- Light Detection In Noble Elements (LIDINE 2023), Madrid, Spain, 20–22 September 2023, Liquid Ar (LAr) and liquid Xe (LXe) time projection chambers (TPCs) are used for many applications in neutrino physics and direct dark matter searches. The performance of these detectors, particularly dual-phase ones, depends very strongly on the efficiency for detecting the far ultraviolet (FUV) scintillation light. Such detection is particularly challenging for LAr, in which the strongest scintillation feature is observed at a wavelength of 127 nm (175 nm for LXe). The current mainstream approach is covering the optical surfaces with a wavelength shifter, which absorbs de FUV light and emits at wavelengths that overlap with the optical band, where commercial devices have higher detection efficiency. This work presents coatings designed to enhance the optical properties of the detector materials and to be an alternative to the current technique. In particular, two possible coatings are proposed: narrowband and broadband FUV reflective coatings. The narrowband coatings are tuned at the FUV scintillation light. They provide a large reflectance at the design angle; additionally, these coatings are naturally transparent at longer wavelengths, which might be useful to selectively detect the wavelength of interest. Their performance is evaluated taking into account the refractive index of LAr and as a function of the angle of incidence. The same calculations are performed for an aluminium-based broadband mirror. Finally, the effect on reflectance of submerging both sorts of mirrors at liquid nitrogen temperature is presented., We acknowledge funding to Grant PDC2022-133788-I00 (MCIN/AEI/10.13039/501100011033, European Union NextGenerationEU/PRTR), Grant PID2019-105156GB-I00 (MCIN/AEI/10.13039/501100011033), Grant PID2019-109374GB-I00 and the “Atraccion de Talento” grant 2018-T2/TIC10494.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of swift heavy ions on metal nanoparticles embedded in silica: Using linearly polarized light to monitor the elongation kinetics

  • Borrell-Grueiro, Olivia
  • Mendez-González, Yanela
  • Crespillo, Miguel L.
  • Olivares Villegas, José
  • Ramos-Ramos, Diego J.
  • Junquera, Elena
  • Bañares, Luis
  • Guerrero-Martínez, Andrés
  • Rivera, Antonio
  • Peña-Rodríguez, Ovidio
8 pags., 7 figs.,, The elongation of metallic nanoparticles (NPs) embedded in a dielectric matrix after irradiation with swift heavy ions is a phenomenon that has been known for several years. However, the precise mechanism behind this deformation process is still not fully understood, primarily due to the dearth of information during intermediate stages of deformation. In this study, we report the continuation of our previous work [Peña-Rodríguez et al., Sci. Rep. 7(1), 922 (2017)], exploiting the strong dependence of the localized surface plasmon resonance on the aspect ratio of elongated metal NPs to study the elongation kinetics in situ. In situ optical absorption spectra were measured using a polarizing beam splitter to separate the longitudinal and transverse plasmon modes of the anisotropic NPs. Then, the detailed geometrical and compositional parametersweredeterminedfromafitofthesespectra.Theuseoflinearlypolarizedlightallowedforamoreaccurateanalysisoftheelongation kinetics, particularly useful in the first stages, where longitudinal and transverse modes overlap., O.B.-G. acknowledges financial support for predoctoral contracts through Madrid Regional Government Grant No. S2018/EMT-4437 and Spanish Ministry of Science and Innovation (MICINN) Grant No. PID2021-122839NB-I00. This work was funded by the Spanish Ministry of Science and Innovation (MICINN) (Grant Nos. PID2019-105156GB-I00 and PID2021122839NB-I00) and the Madrid Regional Government through the TechnoFusion (III)-CM (S2018/EMT-4437) program, co-financed with Structural Funds (ERDF and ESF). The research leading to this result was supported by the RADIATE project under the Grant Agreement No. 824096 from the EU Research and Innovation program HORIZON 2020. The authors acknowledge the computer resources and technical assistance provided by the Centro de Supercomputación y Visualización de Madrid (CeSViMa-MAGERIT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-consistent optical constants of LiF films

  • Li, Shuangying
  • Honrado-Benítez, Carlos
  • López-Reyes, Paloma
  • Larruquert, Juan Ignacio
  • Zhang, Jinlong
  • Wang, Zhanshan
13 pages, 7 figures, 1 table, Lithium fluoride (LiF) has the shortest known cut-off in nature, with transparency down to 102.5 nm, which makes it a critical material for far-ultraviolet (FUV, 100 nm < λ < 200 nm) optical elements. Accurate optical constants are essential for element design. As with other metal fluorides, LiF film optical constants are temperature sensitive. This study presents optical constants for LiF thin films deposited by boat evaporation onto substrates at 298 K and 503 K. Reflectance and transmittance in the range of 30-195 nm were measured in situ, in order to avoid the instability of LiF films, particularly in contact with humid air. Ellipsometry measurements were carried out from 210 to 1690 nm and were fitted with a Lorentz oscillator. The self-consistent optical constants were obtained using the Kramers-Kronig (KK) analysis by extending the data range with literature data and extrapolations. Calculated results using the obtained optical constants show good agreement with the experimental measurements. Furthermore, the global self-consistency was assessed by a classical sum-rule at the whole range, and the local self-consistency by what we believe to be a novel sum-rule method incorporating window functions at each photon energy range, yielding satisfactory results. These are the first self-consistent optical constants reported for LiF films., National Key Research and Development Program of China (2023YFF0715602); China Scholarship Council (202106260082); Agencia Estatal de Investigación (PID2019-105156GB-I00, PID2022-142417OB-I00); National Natural Science Foundation of China (62475193, 62192772)., Peer reviewed