Pasar al contenido principal

RECUBRIMIENTOS OPTICOS PARA NUEVOS RETOS DE LA ASTROFISICA Y LA FISICA SOLAR

ESP2016-76591-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-consistent optical constants of MgF2,LaF3, and CeF3 films

  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
  • Méndez, José Antonio
  • Aznárez, José Antonio
18 pags., 11 figs., 3 tabs., Various fluorides are materials in nature that extend their transparency range to the shortest wavelengths in the far ultraviolet (FUV, 100nm<¿<200 nm). These are relevant materials to prepare multilayer coatings in the FUV for demanding applications such as space instrumentation for astrophysics, solar physics and atmosphere physics, as well as free electron lasers, plasma diagnostics, synchrotron radiation, lithography, spectroscopy, etc. Multilayer design requires the optical constants of the coating materials. Multilayers optimally alternate two transparent materials with contrasting refractive indices. The optical constants of a low-index material, MgF2, and of two high-index materials, LaF3 and CeF3, have been determined in a wide spectral range and are presented here. Thin films of MgF2, LaF3, and CeF3 were deposited by boat evaporation onto substrates at 523 K. Transmittance, reflectance, and ellipsometry measurements were performed in ranges jointly covering the 30- 950-nm spectral range. This range was extended with literature data and extrapolations to obtain self-consistent optical constants using the Kramers-Kronig (KK) analysis. An iterative, double KK analysis procedure (successive reflectance-phase and k-n KK analyses) was carried out to obtain a self-consistent set of optical constants per material. With the final data sets, the experimental measurements were satisfactorily reproduced. Global self-consistency of the data sets was successfully evaluated through sum rules; additionally, local selfconsistency at each photon energy range was also evaluated through a novel sum-rule method which involves window functions. The new sets of optical constant extend the data availability mainly to the FUV and beyond, particularly for CeF3, where few data had been reported., Spanish Programa Estatal de Investigación Científica y Técnica de Excelencia, Secretaría de Estado de Investigación, Desarrollo e Innovación (AYA2013-42590-P and ESP2016-76591-P)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of MgF2-deposition temperature for far UV Al mirrors

  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
  • Méndez, José Antonio
  • Gutiérrez-Luna, Nuria
  • Espinosa-Yáñez, Lucía
  • Honrado-Benítez, Carlos
  • Chavero Royan, José
  • Perea-Abarca, Belén
10 pags., 6 figs., tab. -- OCIS codes: (230.4040) Mirrors; (310.1515) Protective coatings; (260.7210) Ultraviolet, vacuum; (160.4670) Optical materials; (310.6860) Thin films, optical properties; (120.6085) Space instrumentation., Progress towards far UV (FUV) coatings with enhanced reflectance is invaluable for future space missions, such as LUVOIR. This research starts with the procedure developed to enhance MgF-protected Al reflectance through depositing MgF on a heated aluminized substrate [Quijada et al., Proc. SPIE 8450, 84502H (2012)] and it establishes the optimum deposition temperature of the MgF2 protective film for Al mirrors with a reflectance as high as ∼90% at 121.6 nm. Al films were deposited at room temperature and protected with a MgF2 film deposited at various temperatures ranging from room temperature to 350°C. It has been found that mirror reflectance in the short FUV range continuously increases with MgF deposition temperature up to 250°C, whereas reflectance decreases at temperatures of 300°C and up. The short-FUV reflectance of mirrors deposited at 250°C only slightly decreased over time by less than 1%, compared to a larger decay for standard coatings prepared at room temperature. Al mirrors protected with MgF2 deposited at room temperature that were later annealed displayed a similar reflectance enhancement that mirrors protected at high temperatures. MgF and Al roughness as well as MgF density were analyzed by x-ray grazing incidence reflectometry. A noticeable reduction in both Al and MgF roughness, as well as an increase of MgF2 density, were measured for films deposited at high temperatures. On the other hand, it was found a strong correlation between the protective-layer deposition temperature (or post-deposition annealing temperature) and the pinhole open area in Al films, which could be prevented with a somewhat thicker Al film., Secretaría de Estado de Investigación, Desarrollo e Innovación (AYA2013-42590-P, ESP2016-76591-P)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Far-UV reflectance of Al mirrors protected with hot-deposited MgF2

  • Rodríguez de Marcos, Luís
  • Gutiérrez-Luna, Nuria
  • Espinosa-Yáñez, Lucía
  • Honrado-Benítez, Carlos
  • Chavero Royan, José
  • Perea-Abarca, Belén
  • Larruquert, Juan Ignacio
9 pags., 6 figs., 1 tab. -- Event: SPIE Optical Systems Design, 2018, Frankfurt, Germany, Mirrors based on Al protected with a MgF2 film provide high reflectance over a broad spectral range down to the wavelength of 120 nm in the Far UV (FUV). After more than 50 years since the development of this technology, a significant FUV reflectance enhancement has been obtained in the last years. Such enhancement originates mostly in the higher transparency of the MgF2 protective layer deposited on a hot Al-coated substrate. Research has been conducted at GOLD to measure the dependence of the FUV reflectance enhancement with MgF2 deposition temperature. A reflectance enhancement was found for freshly-prepared samples; moreover, the reflectance degradation over time of Al films protected with hot-deposited MgF2 was also smaller than for the coatings deposited at room temperature. A reflectance as high as 90% was measured at 121.6 nm (hydrogen Lyman ¿ line) for aged samples. A FUV reflectance enhancement was also obtained on samples fully deposited at room temperature and later annealed in vacuum. The reflectance of Al mirrors as a function of MgF2 deposition temperature, as well as of post-deposition annealed mirrors, and their stability over time is presented. Structural data on film roughness, density, and main crystal orientations for mirrors with a MgF2 film deposited both at room temperature and at 250°C are also presented., This work was supported by the National Programme for Research, Subdirección General de Proyectos de Investigación, Ministerio de Ciencia e Innovación, grants AYA2013-42590-P and ESP2016-76591-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical constants at complex energies: local deconvolution

  • Larruquert, Juan Ignacio
  • Rodríguez de Marcos, Luís
13 pags., 6 figs., 2 apps., Causality implies that the optical constants of any material continue in the upper complex plane of photon energies or wavelengths as an analytic function. This is the basis for Kramers-Kronig dispersion relations to obtain ε from ε2, or n from k. However, there have not been attempts to explore this continuation. This research focuses on such continuation and on applications thereof. An interesting property has been found: optical constants progressively smoothen when entering the upper complex plane. The continuation to complex energies is found to result in an average of the optical constants with a Lorentzian weight function. This optical-constant smoothening originated in a shift to the upper complex plane is naturally produced in optical constants that have been obtained by means of an optical instrument with a Lorentzian slit function. This smoothening results in reduced resolution through convolution with the slit function. A procedure that takes advantage of optical constants at complex energies is developed for optical-constant deconvolution. Deconvolution is performed locally, i.e., with no integration, and it consists of shifting the energy of the optical constants by an imaginary amount by means of a Taylor series expansion. The first correction term involves the derivative of the other optical constant. Even though deconvolution of optical constants measured with a Gaussian slit cannot be directly performed with the present method, an approach based on powers of the Lorentz function is also proposed. This procedure could be implemented as an analysis tool of a spectrophotometer or an ellipsometer; this tool would enable one to measure optical constants with a modest resolution and to improve it by post-processing them with the present scheme., Ministerio de Economía, Industria y Competitividad, Gobierno de España (ESP2016-76591-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Window functions for self-consistency evaluation of optical constants

  • Larruquert, Juan Ignacio
  • Rodríguez de Marcos, Luís
18 pags., 10 figs., 1 tab., Optical-constant data of a material typically come from various sources, which may result in inconsistent data. Sum rules are tests to evaluate the self-consistency of optical constant data sets. Standard sum rules provide collective self-consistency evaluation of an optical-constant set in the full electromagnetic spectrum, but they give no information on the specific spectral range originating the inconsistency. Spectrally-resolved self-consistency information can be obtained with the use of window functions (WFs). Window functions can give more weight to the desired spectral range in the calculation of the sum rule. A previously developed WF was successfully used to evaluate self-consistency over the spectrum, but since it involves steep transition at the window edges and center, it has a trend to turn unstable in the calculation of sum-rule integrals for a fast decaying WF outside the window band. Two new WFs have been developed to reduce such instability. They use weight functions that smoothly cancel at the two window edges and center. The two new WFs use a weight function with three straight lines or with two 4-degree polynomials. The new WFs have been tested on exact optical constants with a coarse sampling, and they provide a strong instability reduction in self-consistency evaluation compared with the old WF. The new WFs have been also tested on experimental data sets of Al and Au reported in the literature, which unveils ranges of inconsistency. The large stability of the new WFs compared with the old one helps decide that the inconsistency calculated with the new WFs on experimental data must be attributed to inconsistency of the data sets, and not to poor sampling rate. A WF that has been used in the literature in the calculations of the dielectric function at imaginary energies for the thermal Casimir effect is also analyzed in terms of self-consistency when it is applied to sum rules involving optical constant at real (not imaginary) energies., Ministerio de Economía, Industria y Competitividad (ESP2016-76591-P)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Why is the Adachi procedure successful to avoid divergences in optical models?

  • Larruquert, Juan Ignacio
  • Rodríguez de Marcos, Luís
15 pags., 6 figs., 1 tab., Adachi proposed a procedure to avoid divergences in optical-constant models by slightly shifting photon energies to complex numbers on the real part of the complex dielectric function, "1. The imaginary part, "2, was ignored in that shift and, despite this, the shifted function would also provide "2 (in addition to "1) in the limit of real energies. The procedure has been successful to model many materials and material groups, even though it has been applied phenomenologically, i.e., it has not been demonstrated. This research presents a demonstration of the Adachi procedure. The demonstration is based on that "2 is a piecewise function (i.e., it has more than one functionality), which results in a branch cut in the dielectric function at the real photon energies where "2 is not null. The Adachi procedure is seen to be equivalent to a recent procedure developed to turn optical models into analytic by integrating the dielectric function with a Lorentzian function. Such equivalence is exemplified on models used by Adachi and on popular piecewise optical models: Tauc-Lorentz and Cody-Lorentz-Urbach models., Ministerio de Ciencia e Innovación, Gobierno de España (ESP2016-76591-P, PID2019-105156GBI00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the deposition parameters of MgF2/LaF3 narrowband reflective FUV multilayers

  • López-Reyes, Paloma
  • Perea-Abarca, Belén
  • Honrado-Benítez, Carlos
  • Gutiérrez-Luna, Nuria
  • Ríos-Fernández, Á.
  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
14 pags., 7 figs., 3 tabs., The development of efficient dielectric coatings in the far UV (FUV) is demanded for upcoming space instrumentation, such as LUMOS (LUVOIR Ultraviolet Multi-Object Spectrograph) in LUVOIR mission, among other applications. Multilayers (MLs) based on MgF2 and LaF3 have been developed in the last decades for the 157-nm and 193-nm lithography, demonstrating excellent optical properties. Yet, the deposition procedure to obtain coatings with optimal performance has not been fully detailed in the open literature, such as the dependence of ML performance with deposition and post-deposition temperature. This research investigates the effect of the substrate deposition temperature of MgF2/LaF3 ML coatings prepared by thermal evaporation on FUV reflectance, stress, roughness, as well as the performance of the coatings and their evolution over time. The relatively higher expansion coefficient of these two fluorides in comparison with fused silica substrates results in a large tensile stress for coatings deposited at high temperature and later cooled down to room temperature. Such stress may result in coating cracking and delamination. A compromise deposition temperature of ∼240°C and 13 bilayers was found for optimal ML reflectance peaked at ∼160 nm before cracks are generated. Above this deposition temperature, stress increased, which resulted in an extension of the cracked area and in a slight roughness increase and FUV reflectance decrease. MLs that were deposited at room temperature and later annealed resulted in a similar reflectance and stress to those of hot-deposited coatings for a given temperature., Ministerio de Economía, Industria y Competitividad, Gobierno de España (BES-2017-081909, ESP2016-76591-P, PID2019-105156GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lyman-β narrowband coatings with strong Lyman-α rejection

  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
  • Méndez, José Antonio
  • Vidal Dasilva, Manuela
  • García-Cortés, Sergio
  • Gutiérrez-Luna, Nuria
  • Espinosa-Yáñez, Lucía
  • Honradobenítez, Carlos
  • Chavero Royan, José
12 pags., 8 figs., 2 tabs., Novel narrowband multilayer coatings efficient at a wavelength as short as 100 mn are presented, which pushes shortwards the existing limit of reported narrowband multilayers. Such limit had been established at ~120 nm, close to the MgF2 cutoff wavelength. The new multilayers combine layers of Al, LiF, and SiC, in an Al/LiF/SiC/LiF multilayer design (four layers, starting with the innermost layer). Among these materials, Al and LiF are deposited by evaporation and SiC by ion-beam-sputtering. In addition to a high, narrow peak close to H Lyman β (102.6 nm), these multilayers simultaneously provide a very small reflectance at H Lyman α (121.6 nm). This combined performance is demanded in space instrumentation for astrophysics and solar physics observations among others, where imaging the sky at the important diagnostic spectral line of Lyman β line requires rejecting the frequently much more intense background at Lyman α line. Such is the case for solar corona observations at Lyman β, which is masked by the strong Lyman α line. The multilayer peak is placed close to another important diagnostic tool: the OVI doublet at 103.2 and 103.8 nm. The target of small reflectance at 121.6 nm was seen to be the most critical. The best strategy in multilayer preparation was to prepare it with such minimum reflectance at slightly shorter wavelengths so that the coating evolved to shift it longwards over time. Multilayers kept a remarkable 102.6 nm/121.6 nm reflectance ratio over time in spite of some performance degradation. Hence, a multilayer coating aged of 4 years kept a reflectance of 43% at 102.6 nm and 0.2% at 121.6 nm., Spanish Programa Estatal de Investigación Científica y Técnica de Excelencia, Secretaría de Estado de Investigación, Desarrollo e Innovación (AYA2013-42590-P, ESP2016-76591-P, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Far UV narrowband mirrors tuned at H Lyman α

  • López-Reyes, Paloma
  • Gutiérrez-Luna, Nuria
  • Honrado-Benítez, Carlos
  • Ríos-Fernández, Á.
  • Enríquez-Pérez, Esther
  • Chavero Royan, José
  • Espinosa-Yáñez, Lucía
  • Rodríguez-de Marcos, Luis V.
  • Larruquert, Juan Ignacio
17 pags., 9 figs., 2 tabs., Imaging at H Ly-α (121.6 nm), among other spectral lines in the short far UV (FUV), is of high interest for astrophysics, solar, and atmosphere physics, since this spectral line is ubiquitously present in space observations. However, the lack of efficient narrowband coatings has mostly prevented such observations. Present and future space observatories like GLIDE and the IR/O/UV NASA concept, among other applications, can benefit from the development of efficient narrowband coatings at Ly-α. The current state of the art of narrowband FUV coatings lacks performance and stability for coatings that peak at wavelengths shorter than ∼135 nm. We report highly reflective AlF3/LaF3 narrowband mirrors at Ly-α prepared by thermal evaporation, with, to our knowledge, the highest reflectance (over 80%) of a narrowband multilayer at such a short wavelength obtained so far. We also report a remarkable reflectance after several months of storage in different environments, including relative humidity levels above 50%. For astrophysics targets in which Ly-α may mask a close spectral line, such as in the search for biomarkers, we present the first coating in the short FUV for imaging at the OI doublet (130.4 and 135.6 nm), with the additional requirement of rejecting the intense Ly-α, which might mask the OI observations. Additionally, we present coatings with the symmetric design, aimed to observe at Ly-α, and reject the strong OI geocoronal emission, that could be of interest for atmosphere observations., Agencia Estatal de Investigación (BES-2017-081909, ESP2016-76591-P, PID2019-105156GB-I00); Ministerio de Economía y Competitividad (BES-2017-081909)., Peer reviewed