Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Growth and Properties of Sb-Ge-Se Thin Films: A Promising Material for Sustainable Photovoltaic Devices Development

  • Bonal, Víctor
  • Khelif, Samira
  • Djurdjic Mijin, Sanja
  • Galiana, Beatríz
  • Sánchez, Yudania
  • García Pardo, Marina
  • Arranz, Antonio
  • Ruiz Marín, Nazaret
  • Lazic, Snezana
  • Serna, Rosalía
  • Caballero, Raquel
Sb-Ge chalcogenides are known as effective phase change materials, making them ideal for optical data storage applications, detectors, and sensors. However, there have been no photovoltaic devices developed using these materials to date. In this work, Sb-Ge-Se crystalline thin films with different [Sb]/[Ge] atomic ratios are successfully grown for the first time through the selenization of co-evaporated Sb and Ge layers. The impact of the Se addition and temperature during the selenization process on the composition, structural, morphological, vibrational, and optical properties of the Sb-Ge-Se layers is investigated. The coexistence of Sb2Se3 and GeSe2 has been confirmed using various characterization techniques, including Grazing Incidence X-ray diffraction, Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy and Raman spectroscopy. Additionally, Scanning Transmission Electron Microscopy has revealed Ge-enrichment regions surrounding the Sb2Se3 crystals. The composition of the co-evaporated film and final Ge content in the chalcogenide film govern the band gap energy, increasing from 1.41 to 1.83 eV. We present the inaugural operational SLG/Mo/Sb-Ge-Se/CdS/ZnO/ITO photovoltaic devices with a total efficiency of 1.34%. The primary factors limiting the device performance are the significant CdS diffusion into the active layer and the high defect density, as determined by Capacitance-Voltage and Drive-Level Capacitance Profiling. The devices exhibit excellent stability after 1 year of storage in ambient air. These first prototypes of Sb-Ge-Se crystalline thin films pave the way for advancement in the development of sustainable and stable photovoltaic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semitransparent Wide Bandgap Cu2ZnGe(S,Se)4Thin-FilmSolar Cells: Role of the Sulfurization Process

  • Ruiz-Perona, Andrea
  • Palma-Lafuente, David
  • Sánchez, Yudania
  • Guc, Maxim
  • Kodalle, Tim
  • Salem, Mohamed Ould
  • Placidi, Marcel
  • Serna, Rosalía
  • Pérez-Rodríguez, Alejandro
  • Merino, José Manuel
  • Caballero, Raquel
9 pags., 6 figs., 2 tabs., Semitransparent solar cells are very attractive due to the increasing integration in daily life. Kesterite-type based thin-film solar cells stand out because of its environmentally benign composition and outstanding stability. Herein, the influence of the back contact (Mo/V2O5/FTO or Mo/FTO) and thickness of Cu2ZnGe(S,Se)4 (CZGSSe) absorber layer, grown by sulfurization of coevaporated CZGSe, is investigated. To increase the transparency, thinner absorber layers with higher bandgap energy are produced. A double sulfur gradient through the CZGSSe layer with a considerable S content near the back contact and the formation of Mo(S,Se)2 phase at the back interface is detected for an absorber of only 400 nm thickness. Efficiencies of 3.1% and 2.7% are achieved for 1.2 μm CZGSSe-based devices with Eg of 1.73 and 1.86 eV, respectively, while enabling transmittance values higher than 20% in the near-infrared (NIR). The highest transmittance, 40% in the NIR, is achieved for the 400 nm CZGSSe-based solar cells with Eg of 2.1 eV; however, a significant reduction of these devices’ performance is obtained due to the presence of ZnS secondary phase and a different back-contact interface formation. This work presents the first promising semitransparent CZGSSe solar cells, opening new paths of applications., This work was supported by CELL2WIN (PID2019-104372RB-C32), InnoPV(PID2022-140226OB-C33) funded by MCIN/AEI/ 10.13039/501100011033and by“ERDF A way of making Europe,”ASSESS (TED2021-129666B-C21and TED2021-129666B-C22) funded by MCIN/AEI/10.13039/501100011033 by the“European Union NextGenerationEU/PRTR”andthe European Project INFINITE-CELL (H2020-MSCA-RISE-2017-777968).M.P. and M.G. acknowledge thefinancial support from the SpanishMinistry of Science, Innovation and Universities within the Ramón yCajal (grant no. RYC-2017-23758) and Ramón y Cajal (grant no.RYC2022-035588-I) programs, respectively. A.R.P. also acknowledgesthefinancial support from Community of Madrid within YouthEmployment Program (grant no. PEJD-2017-PRE/IND-4062)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building Conventional Metasurfaces with Unconventional Interband Plasmonics: A Versatile Route for Sustainable Structural Color Generation Based on Bismuth

  • Chacón, Fernando
  • Ruiz de Galarreta, Carlota
  • Nieto-Pinero, Eva
  • García-Pardo, Marina
  • García-Tabares, Elisa
  • Ramos, Nicolás
  • Castillo, Miguel
  • López-García, Martín
  • Siegel, Jan
  • Toudert, Johann
  • Wright, C. David
  • Serna, Rosalía
9 pags., 7 figs. 1 tab., Plasmonic metasurfaces for structural color generation are typically built using the archetypal noble metals, gold, and silver. These possess plasmonic properties in the visible spectrum due to their inherent high free carrier densities. However, they are much more expensive compared to many other metals and exhibit several nanofabrication issues such as bad surface adhesion or thermally activated inter-diffusion. In this work, it is shown that interband plasmonic materials –whose optical properties are driven by interband transitions instead of free carriers— are appealing candidates for the fabrication of sustainable and cost-efficient metasurfaces for structural coloring. By using bismuth, an environment-friendly interband plasmonic material cheaper than gold and silver, nanodisks gap-plasmon metasurfaces and planar Fabry-Perot cavities are modeled and fabricated, which both successfully enable pure colors that can be robustly tailored upon suitable design. By direct experimental comparison between both types of design interms of color efficiency, fabrication complexity, and angular robustness; howbismuth-based gap surface plasmon metasurfaces can be excellent candidates for color microprinting is shown, whereas nanolayered BiFabry-Pérot cavities are ideal for macroscopic color coatings due to their easeof fabrication and implementation., C.R.de G. acknowledges funding from the Marie Sklodowska-Curie Individual Fellow-ship 101068089 (METASCALE) and from Margarita Salas/UniversidadAutónoma de Madrid (CA1/RSUE/2021-00829) funded by the “Next Gen-eration EU” program of the EU. This work had been partly funded by the national research grants ULS_PSB (PID2020-112770RB-C21), AlPHOM-ENA (PID2021-123190OB-I00f), and (ASSESS TED2021-129666B-C22)from the Spanish Research Agency (AEI, Ministry of Research andInnovation)) funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) y la Agencia Estatal de Investigación (AEI) MCIN/AEI/10.13039/501 100 011 033 and by “ERDF a way of making Europe”, and the“European Union NextGenerationEU/PRTR”. R.S. and F.C.-S. would like toacknowledge funding from the INTRAMURALES-CSIC project LANAAP-EU (PIE-202050E195), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatile femtosecond laser interference patterning applied to high-precision nanostructuring of silicon

  • Solana-Ramírez, Irene
  • Chacón, Fernando
  • García-Lechuga, Mario
  • Siegel, Jan
10 pags., 9 figs., We present a high-precision nanostructuring technique based on beam interference from a commercial Ti:Sa femtosecond amplified laser (800 nm, 120 fs, 1 kHz, 1 mJ). Its potential and versatility is illustrated by applying the technique to the nanostructuring of silicon. Employing commercial and ad-hoc laser-fabricated diffractive optical elements together with standard optical components, periodic line gratings and spot arrays with tunable periods down to 650 nm can readily be fabricated. Moreover, fabrication of millimeter-size diffraction gratings via multipulse irradiation at processing speeds up to 0.5 mm/s is demonstrated. The variety of structures written in crystalline silicon feature amorphous fringes and dots with widths down to 300 nm. The corresponding complex topography profiles consist of surface elevations and depressions with sizes down to 120 nm that can be controlled by the laser fluence and fringe width, demonstrating the presence of several competing matter reorganization processes in the molten phase. The exceptional high-contrast ratio of the fringe intensity together with a near-Gaussian intensity envelope of the laser spot enable patterning with well-defined local fluences, paving the way for single-pulse fluence-dependent studies. The high-quality experimental data that can be obtained with this technique can prove critical for modelling attempts aimed at unravelling the underlying formation mechanisms of complex surface topographies in a wide range of materials. Furthermore, the technique presented here has outstanding potential for the rapid and versatile fabrication of high-precision metasurfaces., This work is part of the projects ULS_PSB (PID2020-112770RB-C21), HyperSolar (TED2021-130894B-C22) and ASSESS (TED2021-129666B- C22), and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation), FEDER (European Regional Development Fund), as well as by the European Union NextGenerationEU/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoplasmonic tuneable response by femtosecond laser irradiation of glass with deep-implanted gold nanoparticles

  • Solana-Ramírez, Irene
  • Ynsa, María Dolores
  • Cabello, Fátima
  • Chacón, Fernando
  • Siegel, Jan
  • García-Lechuga, Mario
8 pages, 5 figures, The manipulation of the optical properties of plasmonic nanocomposites is of high interest for the development of advanced optical devices with tailored unique properties. Achieving these objectives requires a combination of synthesis techniques and post-fabrication strategies. Here, we combine the use of two well-established physical strategies: MeV ion implantation and femtosecond laser processing. Firstly, we synthesize Au-doped soda lime glass nanocomposite through ion beam implantation (Au2+ at 1.8 MeV) followed by thermal annealing. This synthesis procedure results in a peculiar optical response based on the combination of Au-nanoparticle plasmonic resonance and a Fabry-Perot interference, caused by the deep implantation (centered at 480 nm). Secondly, this dual response is demonstrated to be highly tuneable by non-resonant femtosecond laser irradiation (800-nm wavelength and 130-fs pulse duration). Depending on the laser fluence, three transformation regimes are distinguished: supressing the interferometric response by spallative ablation, inducing vivid blue colors by surface swelling, and producing red-shifted color changes by multi-shot irradiation at low fluences. The proposed method is very versatile, since it is applicable to any dielectric matrix or implanted element. This work paves the way to a new route for the development of scalable and tuneable nanocomposites with several potential applications in optics., The current research was funded through grants ULS_PSB(PID2020112770RB-C21 and PID2020-112770RB-C22) funded by MCIN/AEI/ 10.13039/501100011033 and ASSESS (TED2021-129666B-C22) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Authors acknowledge the support from CMAM-UAM for the beam time (STD045/22, STD009/23, STD024/23 and STD025/23) and its technical staff support, in particular to Jesús S´anchez Prieto. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopías Avanzadas" at the University of Zaragoza. I. S. acknowledges for their support and help in RBS analysis to Jose Gonzalo de los Reyes (IO, CSIC) and Gaston García Lopez (CMAM-UAM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semimetal/Substrate Cavities Enabling Industrial Materials for Structural Coloring

  • Chacón, Fernando
  • Serna, Rosalía
10 pages, 6 figures, This work was partly fundedby the national research grants, ALPHOMENA (PID2021-123190OB-I00f) and ASSESS (TED2021-129666B−C21 andC22) funded by MCIN/AEI/10.13039/501100011033 and bythe European Union NextGenerationEU/PRTR and theEuropean Regional Development Fund (ERDF), as well asfunding from the INTRAMURALES-CSIC project LANAAP-EU (PIE-202050E195)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth and Properties of Sb-Ge-Se Thin Films: A Promising Material for Sustainable Photovoltaic Devices Development

  • Bonal, Víctor
  • Khelifi, Samira
  • Djurdjić Mijin, Sanja
  • Galiana, Beatriz
  • Sánchez, Yudania
  • García-Pardo, Marina
  • Arranz, Antonio
  • Ruíz-Marín, Nazaret
  • Lazić, Snežana
  • Serna, Rosalia
  • Caballero, Raquel
14 pages, 13 figures, 4 tables, Sb-Ge chalcogenides are known as effective phase change materials, making them ideal for optical data storage applications, detectors, and sensors. However, there have been no photovoltaic devices developed using these materials to date. In this work, Sb-Ge-Se crystalline thin films with different [Sb]/[Ge] atomic ratios are successfully grown for the first time through the selenization of co-evaporated Sb and Ge layers. The impact of the Se addition and temperature during the selenization process on the composition, structural, morphological, vibrational, and optical properties of the Sb-Ge-Se layers is investigated. The coexistence of Sb<inf>2</inf>Se<inf>3</inf> and GeSe<inf>2</inf> has been confirmed using various characterization techniques, including Grazing Incidence X-ray diffraction, Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy and Raman spectroscopy. Additionally, Scanning Transmission Electron Microscopy has revealed Ge-enrichment regions surrounding the Sb<inf>2</inf>Se<inf>3</inf> crystals. The composition of the co-evaporated film and final Ge content in the chalcogenide film govern the band gap energy, increasing from 1.41 to 1.83 eV. We present the inaugural operational SLG/Mo/Sb-Ge-Se/CdS/ZnO/ITO photovoltaic devices with a total efficiency of 1.34%. The primary factors limiting the device performance are the significant CdS diffusion into the active layer and the high defect density, as determined by Capacitance-Voltage and Drive-Level Capacitance Profiling. The devices exhibit excellent stability after 1 year of storage in ambient air. These first prototypes of Sb-Ge-Se crystalline thin films pave the way for advancement in the development of sustainable and stable photovoltaic devices., This work was supported by ASSESS (TED2021-129666B-C21 and C22) project funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. This work was in part supported by the research project InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033and by “FEDER/UE”, and by the research project 2DEnLight (PID2020-113415RB-C21) funded by MICIU/AEI/10.13039/501100011033 and by SUNLIFE (PCI2024-155033-2) project funded by MICIU/AEI/10.13039/501100011033/UE. The authors would like to acknowledge the Research Foundation Flanders-Hercules Founda-tion (Belgium) (FWO-Vlaanderen, project No AUGE/13/16:FT-IMAGER). The Raman experiments were performed in the Laboratory for Solid State Physics,headed by Dr. Nenad Lazarevi´c, at the Institute for Physics Belgrade, University of Belgrade, Serbia. B. Galiana is member of the Institute of Chemistry and MaterialsTechnology “ ´Alvaro Alonso Barba” of the UC3M. STEM measurements were partially carried out though an ELECMI-2023 call. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (projectS2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU(FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultraviolet interband plasmonics down to the vacuum UV with ultrathin amorphous silicon nanostructures

  • Toudert, Johann
  • Serna, Rosalía
  • Martín-Sánchez, Javier
  • Larruquert, Juan Ignacio
  • Calvo-Barrio, Lorenzo
Silicon dominates electronics, optoelectronics, photovoltaics and photonics thanks to its suitable properties, abundance, and well-developed cost-effective manufacturing processes. Recently, crystalline silicon has been demonstrated to be an appealing alternative plasmonic material, both for the infrared where free-carrier plasmons are enabled by heavy doping, and for the ultraviolet (UV) where plasmonic effects are induced by interband transitions. Herein, we demonstrate that nanostructured amorphous silicon exhibits such so-called interband plasmonic properties in the UV, as opposed to the expectation that they would only arise in crystalline materials. We report optical plasmon resonances in the 100-to-300 nm wavelength range in ultrathin nanostructures. These resonances shift spectrally with the nanostructure shape and the nature of the surrounding matrix, while their field enhancement properties turn from epsilon-near-zero plasmonic to surface plasmonic. We present a vacuum UV wavelength- and polarization-selective ultrathin film absorber design based on deeply-subwavelength anisotropically-shaped nanostructures. These findings reveal amorphous silicon as a promising material platform for ultracompact and room-temperature-processed UV plasmonic devices operating down to vacuum UV wavelengths, for applications including anticounterfeiting, data encryption and storage, sensing and detection. Furthermore, these findings raise a fundamental question on how plasmonics can be based on amorphous nanostructures., This work has been partly funded by the national research Grants ALPHOMENA (PID2021-123190OB-I00f) and ASSESS (TED2021-129666B-C21 and C22) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR and the European Regional Development Fund (ERDF), and by the national research grant CoatFuvEspIon (PID2022-142417OB-I00) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node ‘Laboratorio de Microscopías Avanzadas’ at University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct laser interference patterning meets laser-induced periodic surface structures: hybrid dual periodic laser patterning of semiconductors

  • Solana, Irene
  • Aiartza, Eneko
  • Chacon, Fernando
  • Siegel, Jan
18 pages, 11 figures, 2 tables, The fabrication of micro- and nanometric structures in semiconductors with ultrashort laser pulses offers enormous potential due to their tunable morphological, electronic and optical properties. Two well-established methods for this purpose are patterning based on laser-induced periodic surface structures (LIPSS) and direct laser interference patterning (DLIP). As both techniques rely on different physical phenomena, a combination of both approaches is feasible, allowing a wide range of opportunities for high-precision laser patterning by superimposing LIPSS in a DLIP pattern. Here, we report the fabrication of hybrid nanostructures in silicon and germanium by multipulse femtosecond laser irradiation (λ = 800 nm, τ = 120 fs) in a versatile DLIP configuration. This configuration allows control of the fringe modulation depth (100%-0%), the DLIP pattern type (fringes or dots) and their period (5 µm-1.25 µm). For fringe patterning, linear laser polarization either parallel or perpendicular to the DLIP fringes is used, leading to single or dual LIPSS with different periods along both plane directions depending on the irradiation conditions. These results show that this strategy allows us to achieve highly tunable LIPSS periods, far beyond the conventional scaling of λ, λ/2 and λ/4. The results reported here explore a promising new pathway for the fabrication of functional surfaces with controllable periods in two dimensions for a wide range of potential applications in relevant fields such as photonics and coating technologies., This work is part of the projects HyperSolar (TED2021130894B-C22), HyperSpec (PID2023-148178OB-C22), MATRIX-CM (TEC-2024/TEC-85) and ASSESS (TED2021-129666B-C22), and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation), Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)), FEDER (European Regional Development Fund), as well as by the European Union NextGenerationEU/PRTR. We acknowledge the service from the MiNa Laboratory at IMN. This research was supported by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant to the first author (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Investigation of Cd-free Sb2Se3 Thin-Film Solar Cells by ALD-ZnSnO Electron Transport Layer

  • Lázaro-Castrillón, Luna
  • Sánchez, Yudania
  • Payno, David
  • Razi, Umair
  • Bonal, Víctor
  • Cabello, Fátima
  • Galiana, Beatriz
  • Pérez-Rodríguez, Alejandro
  • Merino, José Manuel
  • Caballero, Raquel
4 pages, 5 figures, 1 table . -- 42nd European Photovoltaic Solar Energy Conference and Exhibition , 22-26 September, Bilbao, España, Most of the efficient Sb2Se3-based PV devices use CdS as electron transport layer (ETL) or/and an organic hole transport layer. With the objective of fabricating non-toxic and stable solar cells, we investigate substrate Sb2Se3 thin-film PV devices by the replacement of CdS by Zn1-xSnxO (ZTO) layer without using an organic material in the device structure. In this work, Sb2Se3 thin films have been grown by selenization of evaporated Sb layer onto Mo/SLG substrates. ZTO films are fabricated by atomic layer deposition (ALD) to develop Cd-free solar cells, while the reference CdS layer is deposited by chemical bath. The absorber presents an orthorhombic structure with [hk1] preferred orientation, and a compact structure free of pinholes. The different techniques used for the fabrication of the ETLs show the different CdS and ZTO morphologies, with a conformal growth and uniform surface for the ZTO. ITO/ZnO/CdS/Sb2Se3/Mo/SLG and ITO/ZnO/ZnSnO/Sb2Se3/Mo/SLG solar cells are fabricated. A total efficiency of 4.3 % for the CdS/Sb2Se3 solar cell and of 3.0 % for the Cd-free PV device are obtained. It is revealed that ZTO thickness is a critical parameter to optimize the heterojunction. In this work, 40 nm ZTO layer leads to higher device performances., This work was supported by SUNLIFE (PCI2024 155033-2) project funded by MICIU/AEI/10.13039/501100011033/UE, ASSESS (TED2021-129666B-C21 and TED2021-129666B-C22) project funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR” and InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033 and by “FEDER/UE”. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of Sb2Se3 thin-film solar cells: the role of absorber selenization and the CdS buffer layer

  • Payno, David
  • Sánchez, Yudania
  • Rusu, Marin
  • Lázaro-Castrillón, Luna
  • Khelifi, Samira
  • Galiana, Beatriz
  • Bonal, Víctor
  • Mijin, Sanja Djurdjić
  • Arranz, Antonio
  • Danilson, Mati
  • Lazić, Snežana
  • Grossberg-Kuusk, Maarja
  • Unold, Thomas
  • Serna, Rosalía
  • Merino, José Manuel
  • Caballero, Raquel
18 pages, 10 figures, 3 tables, Sb2Se3 has garnered significant interest as a potential material for photovoltaic (PV) devices, owing to its unique properties. Here, Sb2Se3 thin films are grown by selenization of evaporated Sb layers. The Se content and maximum temperature during the selenization process control the composition of the semiconductor. In all cases, the Sb2Se3 is orientated in the [hk1] direction. The increase of Se temperature results in larger grain size; however, the process temperature must be limited to 340 °C to avoid a significant excess of Se and the formation of holes on the Sb2Se3 surface, which leads to decreased performance of the ITO/ZnO/CdS/Sb2Se3/Mo/SLG device. As determined by surface photovoltage, combined Kelvin probe and photoelectron yield spectroscopy measurements, Sb2Se3 thin films exhibit p-type conductivity with a doping concentration of approximately 4 × 1015 cm−3. Two different buffer layers, CdS1 and CdS2, are studied to form the heterojunction. The use of Na citrate as chemical reagent, along with modified chemical bath conditions for CdS2 deposition, results in enhanced PV performance, increasing the device efficiency from 3.6% to 5.4%. This improvement may be related to the superior optical properties of the CdS2 with higher bandgap energy and lower total reflectance, allowing for a higher carrier collection. The observed Cd diffusion towards the active layer, likely results in the formation of Cdi donors that contribute to a stronger downward band bending at the buffer/absorber interface, reducing interface recombination and enhancing open circuit voltage of the devices. Although the modification of the CdS layer plays a key role in improving the device performance, the efficiency of fabricated devices remains limited by interface recombination. A total area efficiency of 5.5% is achieved by reducing the thickness of Sb2Se3 to 450 nm. This study demonstrates the relevance of optimizing the CdS/Sb2Se3 heterointerface to produce efficient Sb2Se3 PV devices., This work was funded by CETPartnership, the Clean Energy Transition Partnership under the 2023 joint call for research proposals (SUNLIFE, CETP-FP-2023-00137), co-funded by the European Commision (GA N° 10169750) and with the following funding organization (PCI2024-155033-2 funded by MICIU/AEI/10.13039/501100011033/UE and TK210 GREENTECH funded by Estonian Research Council). This work was also supported by ASSESS (TED2021-129666B-C21 and TED2021-129666B-C22) project funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union Next Generation EU/PRTR’, InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033 and by ‘FEDER/UE’ and MAS-PV (ILINK23057) funded by CSIC and RENEW-PV project from COST (European Cooperation in Science and Technology) Action Research and International Networking on Emerging Inorganic Chalcogenides for Photovoltaics (CA21148). Authors would also like to acknowledge projects 2DEnLight (PID2020-113415RB-C21) and LAB (PID2023-150420NB-C33) projects funded by Spanish MICINN, NO-DEPENDENCE (G6037) financed by NATO SPS Programme. The authors would like to acknowledge the Research Foundation Flanders-Hercules Foundation (Belgium) (FWO-Vlaanderen, project No AUGE/13/16:FT-IMAGER). B Galiana is member of the Institute of Chemistry and Materials Technology ‘Álvaro Alonso Barba’ of the UC3M. STEM measurements were partially carried out though an ELECMI-2023 call. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). The Raman experiments were performed in the Laboratory for Solid State Physics, headed by Dr Nenad Lazarević, at the Institute for Physics Belgrade, University of Belgrade, Serbia., Peer reviewed