DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Optimization of Sb2Se3 thin-film solar cells: the role of absorber selenization and the CdS buffer layer
18 pages, 10 figures, 3 tables, Sb2Se3 has garnered significant interest as a potential material for photovoltaic (PV) devices, owing to its unique properties. Here, Sb2Se3 thin films are grown by selenization of evaporated Sb layers. The Se content and maximum temperature during the selenization process control the composition of the semiconductor. In all cases, the Sb2Se3 is orientated in the [hk1] direction. The increase of Se temperature results in larger grain size; however, the process temperature must be limited to 340 °C to avoid a significant excess of Se and the formation of holes on the Sb2Se3 surface, which leads to decreased performance of the ITO/ZnO/CdS/Sb2Se3/Mo/SLG device. As determined by surface photovoltage, combined Kelvin probe and photoelectron yield spectroscopy measurements, Sb2Se3 thin films exhibit p-type conductivity with a doping concentration of approximately 4 × 1015 cm−3. Two different buffer layers, CdS1 and CdS2, are studied to form the heterojunction. The use of Na citrate as chemical reagent, along with modified chemical bath conditions for CdS2 deposition, results in enhanced PV performance, increasing the device efficiency from 3.6% to 5.4%. This improvement may be related to the superior optical properties of the CdS2 with higher bandgap energy and lower total reflectance, allowing for a higher carrier collection. The observed Cd diffusion towards the active layer, likely results in the formation of Cdi donors that contribute to a stronger downward band bending at the buffer/absorber interface, reducing interface recombination and enhancing open circuit voltage of the devices. Although the modification of the CdS layer plays a key role in improving the device performance, the efficiency of fabricated devices remains limited by interface recombination. A total area efficiency of 5.5% is achieved by reducing the thickness of Sb2Se3 to 450 nm. This study demonstrates the relevance of optimizing the CdS/Sb2Se3 heterointerface to produce efficient Sb2Se3 PV devices., This work was funded by CETPartnership, the Clean Energy Transition Partnership under the 2023 joint call for research proposals (SUNLIFE, CETP-FP-2023-00137), co-funded by the European Commision (GA N° 10169750) and with the following funding organization (PCI2024-155033-2 funded by MICIU/AEI/10.13039/501100011033/UE and TK210 GREENTECH funded by Estonian Research Council). This work was also supported by ASSESS (TED2021-129666B-C21 and TED2021-129666B-C22) project funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union Next Generation EU/PRTR’, InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033 and by ‘FEDER/UE’ and MAS-PV (ILINK23057) funded by CSIC and RENEW-PV project from COST (European Cooperation in Science and Technology) Action Research and International Networking on Emerging Inorganic Chalcogenides for Photovoltaics (CA21148). Authors would also like to acknowledge projects 2DEnLight (PID2020-113415RB-C21) and LAB (PID2023-150420NB-C33) projects funded by Spanish MICINN, NO-DEPENDENCE (G6037) financed by NATO SPS Programme. The authors would like to acknowledge the Research Foundation Flanders-Hercules Foundation (Belgium) (FWO-Vlaanderen, project No AUGE/13/16:FT-IMAGER). B Galiana is member of the Institute of Chemistry and Materials Technology ‘Álvaro Alonso Barba’ of the UC3M. STEM measurements were partially carried out though an ELECMI-2023 call. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). The Raman experiments were performed in the Laboratory for Solid State Physics, headed by Dr Nenad Lazarević, at the Institute for Physics Belgrade, University of Belgrade, Serbia., Peer reviewed
Proyecto:
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2024-2027 PCI2024-155033-2
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 TED2021-129666B-C21
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 TED2021-129666B-C22
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 PID2022-140226OB-C31
,
AEI PID2020-113415RB-C21
,
AEI PID2023-150420NB-C33
DOI: http://hdl.handle.net/10261/430824, https://api.elsevier.com/content/abstract/scopus_id/105029776509
HANDLE: http://hdl.handle.net/10261/430824, https://api.elsevier.com/content/abstract/scopus_id/105029776509