Pasar al contenido principal

CALCOGENUROS CUSTOMIZABLES Y ABUNDANTES EN LA CORTEZA TERRESTRE POR ANALISIS COMBINATIORIAL PARA GENERACION DE ENERGIA EN AREAS URBANAS

PID2023-148976OB-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ag-promoted Na retention for synergistic defect passivation in kesterite solar cells

  • El Khouja, Outman
  • Gong, Yuancai|||0000-0003-3548-9064
  • Goniotakis, Harris|||0009-0009-9994-2463
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Rovira Ferrer, David|||0000-0003-3867-8987
  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Segura Blanch, Oriol
  • Scaffidi, Romain
  • Malerba, Claudia
  • Valentini, Matteo
  • Hernández Ramírez, Francisco|||0000-0002-2690-947X
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Jehl, Zacharie Victor Samuel Na|||0000-0002-2610-5973
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
The performance of kesterite solar cells is fundamentally limited by a large open-circuit voltage deficit. Here, we demonstrate aprecursor-level Ag–Na codoping strategy via solution processing to overcome this limitation through synergistic regulation oflattice properties and bulk defects. A 10% Ag substitution triggers pronounced grain coarsening and reduces band-tail disorderby suppressing Cu Zn antisite defects, evidenced by a modest but systematic reduction in Urbach energy. Depth profiling reveals aunique cooperative growth mechanism in which rapid Ag-induced surface crystallization effectively traps Na within the film,suppressing severe Na loss during high-temperature selenization and creating a concentrated Na reservoir near the back contact.Na subsequently diffuses upward to passivate bulk defects. Consequently, this Ag-driven lattice framework enables a minimal 2%Na addition to significantly boost the majority carrier concentration, effectively reversing the conventional expectation that Agalloying inevitably depletes carriers. Uniting these structural and electronic improvements at the optimal 10Ag–2Na composition,we achieve a champion power conversion efficiency of 13.1% alongside a severely reduced Voc deficit of 0.378 V. This synergisticcodoping approach offers a robust and scalable pathway for advancing high-efficiency earth-abundant thin-film photovoltaics, This study was supported by HORIZON EUROPE InnovativeEurope (101169056, 866018, CA21148), Ministerio de Ciencia yTecnología (PID2023-148976OB-C41, C44 (CURIO-CITY), PCI2023-145971-2 (ACT-FAST), PID2022-140226OB-C31, C32 (INNO-PV),PCI2024-155100-2, PCI2024-155054-2 (ENPOWER, CETP-PartnershipProgram 2023, co), and CNS2023-14817 (SELECTRON, cofunded byNextGenerationEU/PRTR), María de Maeztu Units (CEX2023-001300-M), and Departament de Salut, Generalitat de Catalunya (2021 SGR01286), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Formation pathway of high-efficiency kesterite solar cells fabricated through molecular ink chemistry

  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Gong, Yuancai|||0000-0003-3548-9064
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • El Khouja, Outman
  • Li, Jianjun|||0000-0003-2872-9648
  • Sun, Kaiwen
  • Jehl, Zacharie Victor Samuel Na|||0000-0002-2610-5973
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
  • Xin, Hao
  • Pérez Rodríguez, Alejandro
  • Hao, Xiaojing
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
Solar cells based on kesterite materials, Cu2ZnSn(S,Se)4 (CZTSSe), offer a non-toxic, Earth-abundant solution for energy generation. However, they have historically struggled to achieve power conversion efficiencies comparable to those of other thin-film photovoltaic technologies. Here we highlight the critical role of the synthesis and formation pathway of these multinary semiconductors, discussing the challenges associated with kesterite layer fabrication and their impact on device performance. In particular, we discuss how the design of molecular inks in kesterite synthesis is key to overcoming these limitations, unveiling the connections between precursor chemistry, synthesis pathways and the formation of point and extended defects. We discuss how precise control over these factors has enabled kesterite solar cells to exceed 15% efficiency. Building on these advances, we propose strategies to further improve device performance. Finally, the insights presented here provide a framework for the exploration and development of other multinary semiconductor materials., This project received funding from the European Union’s Horizon research and innovation programme under grant agreements number 866018 (SENSATE) and 101151487 (LEKPV); by the Spanish Ministry of Science and Innovation projects number PCI2023-145971-2 (ACT-FAST) from the CETP-Partnership Program 2022, PID2022-140226OB-C31 and 32 (INNO-PV), and PID2023-148976OB-C41 (CURIO-CITY); by the National Key Research and Development Program of China (project number 2019YFE0118100) and the National Natural Science Foundation of China (project number 22075150); and by the Cost Association project number CA-21148 (Renew-PV). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033. The authors from UPC and IREC belong to the Micro and Nanotechnologies for Solar Energy Group (MNTSolar) Consolidated Research Group of the “Generalitat de Catalunya” (2021 SGR 01286). K.S. acknowledges the Australian Research Council (ARC) Discovery Early Career Researcher Award (DE230100021) and support from the Australian Centre of Advanced Photovoltaics (ACAP) as a recipient of the ACAP Fellowship (RG172864-B). ZJL acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). S.G. thanks the Serra Húnter program. X. H. acknowledges the financial support of the Australian Research Council (ARC) Future Fellowship (FT190100756). E.S. acknowledges the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier|||0000-0002-4744-7278
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

10.6% Efficient solution-processed Cu2ZnSnS4solar cells via cation substitutions and Li doping

  • El Khouja, Outman
  • Gong, Yuancai|||0000-0003-3548-9064
  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Assahsahi, Ilhame|||0000-0002-7154-8730
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Goniotakis, Harris|||0009-0009-9994-2463
  • Segura Blanch, Oriol
  • Navarro Güell, Alejandro
  • Radu, Cristian
  • Calvo Barrio, Lorenzo
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Jehl, Zacharie Victor Samuel Na|||0000-0002-2610-5973
  • Catalin Galca, Aurelian|||0000-0002-1914-4210
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
Copper–zinc–tin–sulfide (Cu2ZnSnS4, CZTS) kesterites a promising earth-abundant and non-toxic absorber for next-generation thin-film photovoltaics. However, sulfur-based CZTS solar cells remain limited in performance, largely due to intrinsic defects and interfacial recombination losses. Here, we systematically investigate the impact of solvent chemistry and extrinsic doping and compositional engineering on the quality of solution-processed CZTS absorbers. A comparative study of three solvents, 2-methoxyethanol (MOE), dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) reveals that all yield phase-pure, and compact films due to a robust Cu+–Sn4+ molecular precursor system, with MOE producing the most uniform morphology and superior optoelectronic properties. Rather than focusing on pure CZTS, the solvent screening is conducted on Cd-alloyed CZTS (CZCTS), as Cd incorporation substantially alters precursor coordination and crystallization behavior. Building on the optimized processing route, a synergistic compositional strategy combining silver (Ag) – cadmium (Cd) co-alloying with lithium (Li) doping is introduced to suppress cation disorder, passivate grain-boundary defects, and enhance carrier transport. As a result, the optimized he optimized absorber delivers a champion device with a power conversion efficiency of 10.6%, placing it among the highest efficiencies reported for solution-processed, selenium-free CZTS solar cells. These results highlight the critical role of solvent engineering coupled with targeted extrinsic doping in overcoming the long-standing limitations of CZTS photovoltaics and provide a scalable pathway toward environmentally benign thin-film solar technologies., This work also received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 101169056 (MENTOR) and 866018 (SENSATE), and by the Science Ministry of Spain (Ministerio de Ciencia Innovaci´on y Universidades) projects number PID2023- 148976OB-C41 and C44 (CURIO-CITY) and PCI2023-145971-2 (CT-FAST). Y.G. thanks the European Union's Horizon research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101151487 (LEKPV). E.S. is grateful to ICREA (InstituciÓ Catalana de Recerca i Estudis Avançats) Academia program. ZJ acknowledges the RyC program (RYC2021-033239-I), Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

10.6% Efficient solution-processed Cu2ZnSnS4solar cells via cation substitutions and Li doping

  • El Khouja, Outman
  • Gong, Yuancai
  • Jiménez Arguijo, Alex
  • Assahsahi, Ilhame
  • Caño Prades, Ivan
  • Goniotakis, Harris
  • Segura Blanch, Oriol
  • Navarro Güell, Alejandro
  • Radu, Cristian
  • Calvo Barrio, Lorenzo
  • Giraldo Muñoz, Sergio
  • Placidi, Marcel Jose
  • Jehl, Zacharie Victor Samuel Na
  • Catalin Galca, Aurelian
  • Saucedo Silva, Edgardo Ademar
Copper–zinc–tin–sulfide (Cu2ZnSnS4, CZTS) kesterites a promising earth-abundant and non-toxic absorber for next-generation thin-film photovoltaics. However, sulfur-based CZTS solar cells remain limited in performance, largely due to intrinsic defects and interfacial recombination losses. Here, we systematically investigate the impact of solvent chemistry and extrinsic doping and compositional engineering on the quality of solution-processed CZTS absorbers. A comparative study of three solvents, 2-methoxyethanol (MOE), dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) reveals that all yield phase-pure, and compact films due to a robust Cu+–Sn4+ molecular precursor system, with MOE producing the most uniform morphology and superior optoelectronic properties. Rather than focusing on pure CZTS, the solvent screening is conducted on Cd-alloyed CZTS (CZCTS), as Cd incorporation substantially alters precursor coordination and crystallization behavior. Building on the optimized processing route, a synergistic compositional strategy combining silver (Ag) – cadmium (Cd) co-alloying with lithium (Li) doping is introduced to suppress cation disorder, passivate grain-boundary defects, and enhance carrier transport. As a result, the optimized he optimized absorber delivers a champion device with a power conversion efficiency of 10.6%, placing it among the highest efficiencies reported for solution-processed, selenium-free CZTS solar cells. These results highlight the critical role of solvent engineering coupled with targeted extrinsic doping in overcoming the long-standing limitations of CZTS photovoltaics and provide a scalable pathway toward environmentally benign thin-film solar technologies., This work also received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 101169056 (MENTOR) and 866018 (SENSATE), and by the Science Ministry of Spain (Ministerio de Ciencia Innovaci´on y Universidades) projects number PID2023- 148976OB-C41 and C44 (CURIO-CITY) and PCI2023-145971-2 (CT-FAST). Y.G. thanks the European Union's Horizon research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101151487 (LEKPV). E.S. is grateful to ICREA (InstituciÓ Catalana de Recerca i Estudis Avançats) Academia program. ZJ acknowledges the RyC program (RYC2021-033239-I), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Formation pathway of high-efficiency kesterite solar cells fabricated through molecular ink chemistry

  • Jiménez Arguijo, Alex
  • Gong, Yuancai
  • Caño Prades, Ivan
  • El Khouja, Outman
  • Li, Jianjun
  • Sun, Kaiwen
  • Jehl, Zacharie Victor Samuel Na
  • Giraldo Muñoz, Sergio
  • Xin, Hao
  • Pérez Rodríguez, Alejandro
  • Hao, Xiaojing
  • Saucedo Silva, Edgardo Ademar
Solar cells based on kesterite materials, Cu2ZnSn(S,Se)4 (CZTSSe), offer a non-toxic, Earth-abundant solution for energy generation. However, they have historically struggled to achieve power conversion efficiencies comparable to those of other thin-film photovoltaic technologies. Here we highlight the critical role of the synthesis and formation pathway of these multinary semiconductors, discussing the challenges associated with kesterite layer fabrication and their impact on device performance. In particular, we discuss how the design of molecular inks in kesterite synthesis is key to overcoming these limitations, unveiling the connections between precursor chemistry, synthesis pathways and the formation of point and extended defects. We discuss how precise control over these factors has enabled kesterite solar cells to exceed 15% efficiency. Building on these advances, we propose strategies to further improve device performance. Finally, the insights presented here provide a framework for the exploration and development of other multinary semiconductor materials., This project received funding from the European Union’s Horizon research and innovation programme under grant agreements number 866018 (SENSATE) and 101151487 (LEKPV); by the Spanish Ministry of Science and Innovation projects number PCI2023-145971-2 (ACT-FAST) from the CETP-Partnership Program 2022, PID2022-140226OB-C31 and 32 (INNO-PV), and PID2023-148976OB-C41 (CURIO-CITY); by the National Key Research and Development Program of China (project number 2019YFE0118100) and the National Natural Science Foundation of China (project number 22075150); and by the Cost Association project number CA-21148 (Renew-PV). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033. The authors from UPC and IREC belong to the Micro and Nanotechnologies for Solar Energy Group (MNTSolar) Consolidated Research Group of the “Generalitat de Catalunya” (2021 SGR 01286). K.S. acknowledges the Australian Research Council (ARC) Discovery Early Career Researcher Award (DE230100021) and support from the Australian Centre of Advanced Photovoltaics (ACAP) as a recipient of the ACAP Fellowship (RG172864-B). ZJL acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). S.G. thanks the Serra Húnter program. X. H. acknowledges the financial support of the Australian Research Council (ARC) Future Fellowship (FT190100756). E.S. acknowledges the ICREA Academia program., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ag-promoted Na retention for synergistic defect passivation in kesterite solar cells

  • El Khouja, Outman
  • Gong, Yuancai
  • Goniotakis, Harris
  • Caño Prades, Ivan
  • Rovira Ferrer, David
  • Jiménez Arguijo, Alex
  • Segura Blanch, Oriol
  • Scaffidi, Romain
  • Malerba, Claudia
  • Valentini, Matteo
  • Hernández Ramírez, Francisco
  • Giraldo Muñoz, Sergio
  • Placidi, Marcel Jose
  • Jehl, Zacharie Victor Samuel Na
  • Saucedo Silva, Edgardo Ademar
The performance of kesterite solar cells is fundamentally limited by a large open-circuit voltage deficit. Here, we demonstrate aprecursor-level Ag–Na codoping strategy via solution processing to overcome this limitation through synergistic regulation oflattice properties and bulk defects. A 10% Ag substitution triggers pronounced grain coarsening and reduces band-tail disorderby suppressing Cu Zn antisite defects, evidenced by a modest but systematic reduction in Urbach energy. Depth profiling reveals aunique cooperative growth mechanism in which rapid Ag-induced surface crystallization effectively traps Na within the film,suppressing severe Na loss during high-temperature selenization and creating a concentrated Na reservoir near the back contact.Na subsequently diffuses upward to passivate bulk defects. Consequently, this Ag-driven lattice framework enables a minimal 2%Na addition to significantly boost the majority carrier concentration, effectively reversing the conventional expectation that Agalloying inevitably depletes carriers. Uniting these structural and electronic improvements at the optimal 10Ag–2Na composition,we achieve a champion power conversion efficiency of 13.1% alongside a severely reduced Voc deficit of 0.378 V. This synergisticcodoping approach offers a robust and scalable pathway for advancing high-efficiency earth-abundant thin-film photovoltaics, This study was supported by HORIZON EUROPE InnovativeEurope (101169056, 866018, CA21148), Ministerio de Ciencia yTecnología (PID2023-148976OB-C41, C44 (CURIO-CITY), PCI2023-145971-2 (ACT-FAST), PID2022-140226OB-C31, C32 (INNO-PV),PCI2024-155100-2, PCI2024-155054-2 (ENPOWER, CETP-PartnershipProgram 2023, co), and CNS2023-14817 (SELECTRON, cofunded byNextGenerationEU/PRTR), María de Maeztu Units (CEX2023-001300-M), and Departament de Salut, Generalitat de Catalunya (2021 SGR01286), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi
  • Soler Turu, Lluís
  • Placidi, Marcel Jose
  • Voz Sánchez, Cristóbal
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant, Postprint (published version)