Pasar al contenido principal

CATALIZADORES BIMETALICOS PREPARADOS MEDIANTE MECANOSINTESIS PARA LA TECNOLOGIA DEL HIDROGENO

PID2024-156765OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-printed Ni/γ-Al2O3 catalysts for CO2 methanation: Effect of Ni loading and sintering temperature

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Vilella, Tània
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Data will be made available on request., Additive manufacturing (AM) technologies are revolutionizing the production of ceramic components, particularly in fields like catalysis, where complex shapes offer remarkable advantages in performance. AM also minimizes material waste while reducing the number of fabrication steps. This work is focused on the fabrication of Ni/γ-Al2O3 monoliths for CO2 methanation in one step by using Direct-Ink Writing (DIW) of Ni-enriched hydrogel-based γ-Al2O3 inks, and the debinding and sintering in a single thermal treatment. For this purpose, the influence of Ni precursor amount (2.5–5.0 wt% Ni) on the rheological properties of inks and the catalytic activity is investigated. Monoliths with woodpile architecture and 50 % infill are sintered at 450 °C and 600 °C to determine the effect of the sintering temperature on the Ni distribution in the catalyst. Results evidence successful incorporation of the metallic active phase into the monolithic structures. Both the Ni amount and sintering temperature are key factors to enhance the CO2 methanation performance. The 5.0 wt% Ni monolith sintered at 450 °C presents both the highest CO2 conversion and methane selectivity at 350–500 °C, due to better reduction degree, dispersion, and smaller size of Ni nanoparticles at the maximum metal loading. These remarkable results demonstrate the potential of DIW for the fabrication of fully 3D-printed monolithic catalysts with well-dispersed metal particles, all while minimizing production steps., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2024-156765OB-C21, PID2021-125150OB-I00, PID2021-126614OB-I00, PID2022-137274NB-C32, and PID2022-137626OB-C31 funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This work was part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant numbers 2021 SGR 01053 and 01061, and 2017 SGR 1165, and from T02-20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). T.V. acknowledges the Ph.D. scholarship received from the Barcelona Research Center in Multiscale Science and Engineering of the UPC. J.Ll. and M.M are Serra Hunter Fellows and M.P.G. are grateful to ICREA Academia Program (Generalitat de Catalunya). Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged. The authors also thank Gauthier Koch for their assistance during this research., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct recycling of 3D-printed Co-YDZ catalysts for ethanol steam reforming

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Vilella, Tània
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Data will be made available on request., Additive manufacturing enhances the catalyst performance via hierarchical design. To address environmental and resource concerns, this work aims to fabricate directly recycled 3D-printed monoliths using Direct-Ink Writing (DIW) from 100 % recovered cobalt-zirconia powders. Virgin cobalt-zirconia monoliths were firstly fabricated by DIW of 3.0–7.0 wt% Co-enriched hydrogel-based ceramic inks, followed by calcination at 600°C in a single thermal treatment. After testing the catalytic performance of monoliths in ethanol steam reforming, 3D-printed cobalt-zirconia monoliths were fragmented and subjected to subsequent milling and sieving steps to recover composite cobalt-zirconia powders with the appropriate properties for reuse in DIW. The recovered powders, inks and monoliths were microstructurally, rheologically and catalytically characterized, and then compared to catalysts constituted by virgin materials. The rheology properties of inks for the recycled and virgin monoliths presented an appropriate printability. Furthermore, the catalytic performance of recycled monoliths was close to that exhibited by virgin catalysts. This study demonstrates the feasibility of directly recycling fully 3D-printed catalysts, potentially reducing the environmental impact with a circular production model to enhance sustainability in the catalyst industry., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2024–156765OB-C21, PID2021–125150OB-I00, PID2021–126614OB-I00, PID2022–137274NB-C32, and PID2022–137626OB-C31 funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This work was part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant numbers 2021 SGR 01053 and 01061, and 2017 SGR 1165, and from T02–20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). T.V. acknowledges the Ph.D. scholarship received from the Barcelona Research Center in Multiscale Science and Engineering of the UPC. M.M. and J.Ll. are Serra Hunter Fellows and J.Ll. and M.P.G. are grateful to ICREA Academia Program (Generalitat de Catalunya). Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing
  • Usoltsev, Oleg
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto, Iván
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi
  • Lu, Xuan
  • Gupta, Kapil
  • Botifoll, Marc
  • Simonelli, Laura
  • Fauth, François
  • Zhou, Jin Yuan
  • Llorca, Jordi
  • Lu, Yan
  • Zhang, Chao Yue
  • Arbiol, Jordi
  • Cabot, Andreu
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly Li2S nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid Li2S nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications., IREC and HZB acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALINGBAT ─ HORIZON-CL5-2022-D2-01). J.Y. and C.H. thank the China Scholarship Council for the financial support. C.Y.Z. and J.Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. I.M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101081337. XAS experiments were performed at the beamline-22-CLÆSS (Proposal Number: 2024068488),[50] and operando XRD was performed in beamline BL04-MSPD (Grant Number: 2023097750) at ALBA Synchrotron, Spain. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to projects MICIN/FEDER PID2024-156765OB-C21 and CEX2023-001300-M (MCIN/AEI 10.13039/501100011033). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.[51], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chloroplasts-derived Ni-based electrocatalyst for efficient electrochemical ethanol oxidation to acetate with hydrogen cogeneration

  • Mejia-Centeno, Karol V.
  • Alarcón-Cabrera, Cristhyan C.
  • Chacón-Borrero, Jesús
  • Gong, Li
  • Yang, Linlin
  • Freitas, Fernanda M.
  • Yu, Jing
  • Llorens Rauret, David
  • Garzón Manjón, Alba
  • Carreón-Castro, María del Pilar
  • Tarancón, Albert
  • Llorca, Jordi
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical oxidation of biomass-derived organic molecules offers a dual advantage in hydrogen electrolysis: (i) it replaces the sluggish oxygen evolution reaction, accelerating hydrogen generation, reducing cell voltage, and enhancing energy efficiency, and (ii) it valorizes carbon-neutral organic resources into higher-value chemicals. However, the commercial adoption of this strategy relies on the development of electrocatalysts that are cost-effective, energy-efficient, selective, and stable. In this context, biomass not only provides the reactant but also serves as an exceptional resource for creating highly porous and active carbon-based electrocatalysts. In this work, we present a Ni-based electrocatalyst derived from biomass waste, specifically using natural chlorophyll extracted from discarded grape leaves. This catalyst achieves an impressive 86 % Faradaic efficiency for the ethanol oxidation reaction to acetate at 1.5 V, attributed to its large surface area and excellent charge transfer properties. Moreover, it enables 100 % hydrogen production as a co-product at 1.5 V during ethanol oxidation, enhancing its value for energy applications. This study highlights the transformative role of integrating renewable biomass into catalytic systems, demonstrating the potential of biomass-derived materials to drive innovation in electrocatalysis. By converting waste biomass into functional catalysts, this approach advances energy-efficient technologies and addresses environmental challenges of conventional synthesis., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022–136883OB-C22 & PID2023–149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023–042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. AGM has received funding from Grant RYC2021‐033479‐I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/PRTR. JY has received funding from the CSC-UAB PhD scholarship program. D.L.R. acknowledges grant PRE2022–102638. ICN2 is founding member of e-DREAM.83 J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI 10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Harnessing Pt-Mn synergy for the engineering of high-performance TiO2 aerogel in pollutant removal

  • Tbessi, Imen
  • Benito, Monica
  • Molins, Elies
  • Llorca, Jordi
  • Najjar, Wahiba
  • Sayadi, Sami
Photocatalytic degradation of pollutants represents an effective approach to mitigate environmental contamination. In this study, porous Pt-Mn co-doped TiO<inf>2</inf> aerogel nanocomposites were synthesized via a one-pot sol-gel process followed by supercritical drying and evaluated for the degradation of methyl paraben (MeP) under UV-A irradiation. The simultaneous interfacial incorporation of Pt and Mn into a porous TiO<inf>2</inf> aerogel represents a novel photocatalyst design that combines the advantages of bimetallic modification with highly porous framework, creating synergistic surface/interface interactions that provide an unexplored strategy for efficient methyl paraben degradation. Structural analysis by X-ray diffraction confirmed the preservation of a pure anatase phase upon co-doping. Morphological and textural characterizations revealed spherical nanoparticles assembled into a highly porous network with large specific surface area. XPS and elemental mapping demonstrated the homogeneous dispersion of Pt and Mn species on the TiO<inf>2</inf> surface. Optical properties showed a red shift in the absorption edge along with band gap narrowing, reflecting modifications in the electronic structure induced by co-doping. Furthermore, photoluminescence analysis revealed a pronounced decrease in emission intensity for the co-doped samples, indicating suppressed electron-hole recombination due to the combined charge trapping effect of Pt and Mn. Photocatalytic experiments demonstrated significantly enhanced activity of the Pt-Mn/TiO₂ nanocomposites compared to pristine TiO₂, following pseudo-first-order kinetics. The 0.6%Pt-0.6%Mn/TiO₂ sample exhibited the highest performance, achieving 93 % MeP degradation within 120 min under UV-A irradiation, along with good stability over four cycles. These results demonstrate that the enhanced photocatalytic activity is driven by synergistic surface modification induced by Pt and Mn, which effectively charge separation. This work emphasizes the pivotal role of dopant-induced surface and interface engineering in governing photocatalytic performance for water treatment applications., IT, WN and SS wish to acknowledge financial support provided by the Tunisian Ministry of Higher Education and Scientific Research. MB and EM are grateful to grateful to MICINN/FEDER grant PID2021-124572OB-C32 and the Severo Ochoa Program for Centers of Excellence for the MATRANS42 CEX2023-001263-S project. JL is a Serra Húnter Fellow and is grateful to the Academia Excellence Programme (Catalan Government), project MICIN/FEDER PID2024-156765OB-C21, and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI 10.13039/501100011033. The authors thank the X-ray diffraction, spectroscopic services, and Nanoquim platform from the ICMAB. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Multifunctional Electrocatalyst for Formate Production with Concurrent Hydrogen Evolution and Electrochemical Hydrogenation of Glucose to Sorbitol

  • Mejia-Centeno, Karol V.
  • Chacón-Borrero, Jesús
  • Xue, Qian
  • Qi, Xueqiang
  • Martí-Sànchez, Sara
  • Llorca, Jordi
  • Cadavid, Doris
  • Khan, Malik Dilshad
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
Electrochemical valorization of biomass-derived glucose offers a promising route for the sustainable coproduction of valuable chemicals and green hydrogen, yet hinges on the development of cost-effective, multifunctional catalysts. Here, we report a noble metal-free core-shell catalyst, Cu@CoFe2O4, that drives both anodic glucose oxidation and cathodic hydrogen evolution or glucose hydrogenation in a single system. In alkaline media (1 M KOH), the catalyst achieves a glucose conversion of 97.5% with a Faradaic efficiency (FE) of 91.2% toward formate at 1.3 V vs RHE, while enabling hydrogen evolution with 100% FE. In a neutral electrolyte (0.1 M Na2SO4), the same electrode facilitates the selective electrochemical reduction of glucose to sorbitol with an FE of 87.5% and 76% conversion at -0.4 V vs RHE. Experimental and computational analyses suggest that the Cu-rich core/CoFe2O4-rich shell-like heterostructure enhances charge transfer and provides complementary active sites, contributing to the observed activity toward both glucose oxidation and hydrogenation pathways. This work highlights a versatile, earth-abundant electrocatalytic platform for biomass conversion and sustainable hydrogen generation., K.V.M.C. acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. P.R.M.A. thanks DGAPA-UNAM (PAPIIT grant IA203526) and SECIHTI (grant 2025-G-1497) for financial support. J.L. is a Serra Húnter Fellow and is grateful to the Academia Excellence Award (Generalitat de Catalunya) and projects MICIN/FEDER PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023-001300 M funded by MCIN/AEI 10.13039/501100011033. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214 S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is a founding member of e-DREAM. (50), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatial control of trace TiO2 by atomic layer deposition to tune Co–TiOx interfaces for Fischer–Tropsch synthesis

  • Cariño, Ann Charise
  • Biset-Peiró, Martí
  • Martín Morales, Elena
  • Llorca, Jordi
  • Domínguez Ojeda, Eduardo
  • Garzón Manjón, Alba
  • Arbiol, Jordi
  • Guilera, Jordi
Atomic Layer Deposition (ALD) enables atomic-scale engineering of metal–support interfaces, yet the influence of promoter spatial distribution on catalytic performance remains insufficiently understood. In this work, trace amounts of TiO2 were deposited on mesoporous Al2O3 prior to cobalt wet impregnation, and the precursor dose and exposure time were varied to probe the relative influence of Ti loading and spatial distribution. A low-dose/high-exposure strategy led to preferential TiO2 enrichment at the external surface, as evidenced by XPS, HAADF-STEM-EDS, H2-TPR, and WDS analyses. The catalyst exhibiting stronger externalsurface Ti enrichment also showed higher turnover frequency (TOF), CO conversion, hydrocarbon yield, and C5+ selectivity in Fischer–Tropsch synthesis, despite a lower total exposed cobalt surface area determined by CO chemisorption. CO-DRIFTS revealed a pronounced red shift of the adsorbed CO band, indicating modified electronic properties and enhanced CO activation at the Co– TiOx interface. These results suggest that external-surface Ti enrichment contributes to the observed catalytic enhancement. Moreover, the study demonstrates that controlling TiO2 distribution by ALD is a promising strategy for tuning metal–oxide interfacial properties and improving FTS catalyst performance., This work has been co-funded by the European Union, under DocFam+ Fellowship Program (GA 10181337-HORIZON-MSCA-2021-COFUND-01), and VALOTAIL (PID2023–151777OB-I00) project, funded by Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033. Jordi Llorca is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya), project PID2024-156765OB-C21 funded by MICIU/AEI/10.13039/501100011033 and FEDER, and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI 10.13039/501100011033. The authors would also like to thank Xavier Llovet from Scientific and Technological Centers of the University of Barcelona (CCiTUB) for electron probe microanalysis measurements., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MoS2 catalysts selectively achieve high yield of liquid oxygenate from direct conversion of methane via hydroxyl radicals

  • Farrell, Steven L.
  • Jiménez, Juan Diego
  • Wierzbicki, Dominilk
  • Zhang, Jie
  • Chen, Anna X.
  • Llorca Piqué, Jordi
  • Abeykoon, A.M. Milinda
  • Kanbur, Uddhav
  • Li, Yuting
  • Qi, Long
  • Mahurin, Shannon M.
  • Kidder, Michelle K.
  • Telari, Emanuele
  • Bruix Fusté, Albert
  • Stavitski, Eli
  • Senanayake, Sanjaya D.
Directly converting methane (CH4) into liquid oxygenates (e.g., methanol) can circumvent the cost and engineering limits of natural gas transportation and storage. However, oxygenate yields from CH4 remain low, and sulfur present in natural gas hinders activity in most catalysts. To overcome these barriers, we employ bulk molybdenum disulfide (MoS2), a low-cost, robust catalyst which selectively produces large quantities of liquid oxygenates (>900 µmol/gcat·hr) from methane in the presence of hydroxyl (OH•) radicals produced from dilute hydrogen peroxide (H2O2) at 75°C. Under realistic reaction conditions, MoS2 partially and reversibly adopts a metastable, more electrically conductive phase (1T’) that can only be observed through in situ structural probes. Herein, we elucidate that redox synergy between H2O2 and MoS2 produces active OH• radical species that selectively transform CH4 to surface methoxy species at the gas-solid liquid interface, leading to the unitary production of liquid oxygenate at a rate competitive with more costly precious metal catalysts, without additional catalyst preparation steps., Work carried out at Brookhaven National Laboratory (BNL) was sup- ported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences (CSGB) Division, Catalysis Science Program under contract no. DE-SC0012704. SLF and JDJ acknowledge support from the BNL Goldhaber Distinguished Fellowship. This research used resources of the 8-ID (ISS), 8-BM (TES), and 28-ID-1 (PDF) beamlines of the National Synchrotron Light Source II, a DOE Office of Science User Facility operated by BNL under Contract No. DE-SC0012704. AXC acknowledges support from the Office of Workforce Development for Teachers and Scientists (WDTS) under the U.S. DOE Science Undergraduate Labora- tory Internships (SULI) program. A portion of this work was supported by the donors of ACS Petroleum Research Fund under Grant 66593- ND5. AS served as Principal Investigator on ACS PRF 66593-ND5. JL is a Serra Húnter Fellow and gratefully acknowledges support from the Academia Excellence Award (Generalitat de Catalunya), project MICIN/FEDER PID2024-156765OB-C21, and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M, funded by MCIN/AEI 10.13039/501100011033. The authors acknowledge the use of instrumenta- tion provided by the Joint Electron Microscopy Center at ALBA (JEMCA). LQ, YL, and JZ were supported by the DOE, Office of Science, Office of Basic Energy Sciences, CSGB Division, Catalysis Science program. Ames National Laboratory is operated for the DOE by Iowa State University under Contract No. DEAC02-07CH11358. LQ, YL, JZ, and UK thank the support from Iowa State University. AB and ET acknowledge support from the MCIN/AEI (PID2022-140120OA-I00, CEX2021-001202-M and RYC2021-032281-I). This study was also supported by the COST Action CA21101. Computational time was kindly provided by the Red Española de Supercomputación., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi
  • Soler Turu, Lluís
  • Placidi, Marcel Jose
  • Voz Sánchez, Cristóbal
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant, Postprint (published version)