Pasar al contenido principal

TOWARD SUSTAINABLE BATTERIES BASED ON SILICON, SULFUR AND BIO-MASS DERIVED CARBON

PCI2022-132985

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprograma Subprograma Estatal de Internacionalización
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Gupta, Kapil|||0000-0002-4826-6620
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Pinto-Huguet, Ivan
  • Botifoll, Marc|||0000-0002-4876-6393
  • Li, Canhuang
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Zhou, Jin Yuan
  • Ponrouch, Alexandre|||0000-0002-8232-6324
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of LiS and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Li, Junshan|||0000-0002-1482-1972
  • Yuan Zhou, Jin
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Simonelli, Laura|||0000-0001-5331-0633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lei, Yao-Jie
  • Sun, Qing|||0000-0002-9145-7772
  • Wang, Guoxiu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Two-Dimensional Transition Metal Phosphides As Cathode Additive in Robust Lithium-Sulfur Batteries

  • Zhang, Jie
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Canhuang
  • Gong, Qianhong
  • Bi, Wei
  • Zheng, Xuejiao
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Shengjun|||0000-0002-0377-6862
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of advanced cathode materials able to promote the sluggish redox kinetics of polysulfides is crucial to bringing lithium-sulfur batteries to the market. Herein, two electrode materials: namely, ZrPS and ZrPTe, are identified through screening several hundred thousand compositions in the Inorganic Crystal Structure Database. First-principles calculations are performed on these two materials. These structures are similar to that of the classical MXenes. Concurrently, calculations show that ZrPS and ZrPTe possess high electrical conductivity, promote Li ion diffusion, and have excellent electrocatalytic activity for the Li-S reaction and particularly for the LiS decomposition. Besides, the mechanisms behind the excellent predicted performance of ZrPS and ZrPTe are elucidated through electron localization function, charge density difference, and localized orbital locator. This work not only identifies two candidate sulfur cathode additives but may also serve as a reference for the identification of additional electrode materials in new generations of batteries, particularly in sulfur cathodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries, A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing|||0000-0002-7620-745X
  • Pinto-Huguet, Ivan
  • Zhang, Chao Yue
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Xu, Yaolin|||0000-0002-2658-3852
  • Vizintin, Alen|||0000-0003-1876-1396
  • Velasco-Vélez, Juan-Jesús|||0000-0002-6595-0168
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Pan, Xiaobo|||0000-0002-5757-2339
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina|||0000-0002-5056-7174
  • M. Da Silva, Leonardo
  • Luo, Yufeng
  • Lu, Yan|||0000-0003-3055-0073
  • Huang, Chen
  • Härk, Eneli|||0000-0001-5758-8106
  • Fleming, Joe
  • Chenevier, Pascale|||0000-0003-4358-2162
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Bai, Yunfei
  • Botifoll, Marc|||0000-0002-4876-6393
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • An, Qi
  • Amietszajew, Tazdin|||0000-0001-7452-1034
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium-sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede|||0009-0008-5723-3629
  • Sun, Guo Wen
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • He, Ren|||0000-0003-3712-5539
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Canhuang
  • Li, Junshan|||0000-0002-1482-1972
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Rubio Garcia, Javier
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Jin Yuan
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Balancing Electronic Spin State via Atomically-Dispersed Heteronuclear Fe-Co Pairs for High-Performance Sodium-Sulfur Batteries

  • Li, Canhuang
  • Yu, Jing|||0000-0002-7620-745X
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Hao|||0000-0002-4740-5908
  • Cheng, Yapeng|||0000-0002-9218-9095
  • Ren, Yuchuan|||0000-0002-6870-4149
  • Bi, Xiaoyu
  • Ma, Jiachen|||0000-0002-5553-2464
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Wang, Jian
  • Huang, Chen
  • Li, Junshan|||0000-0002-1482-1972
  • Pinto-Huguet, Ivan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Haining|||0000-0002-5546-2347
  • Xin, Sen|||0000-0002-0546-0626
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Room-temperature sodium-sulfur (Na-S) batteries are emerging as a promising next-generation energy storage technology, offering high energy densities at low cost and utilizing abundant elements. However, their practical application is hindered by the shuttle effect of sodiumpolysulfides and the sluggish kinetics of sulfur redox reactions. In this study, we demonstrate a heteronuclear diatomic catalyst featuring Fe and Co bimetallic sites embedded in nitrogendoped hollow carbon nanospheres (Fe-Co/NC) as an effective sulfur host at the cathode of NaS batteries. Aberration-corrected high-angle annular dark field scanning transmission electron microscopy demonstrates the presence of isolated Fe-Co atomic pairs, while synchrotron radiation X-ray absorption fine structure analysis confirms the (Fe-Co-N₆) coordination structure. Density functional theory calculations show that the introduction of Fe atoms induces electron delocalization in Co(II), shifting the electronic configuration from a low-spin to a higher-spin state. This shift enhances the hybridization of the Co dz² orbitals with the antibonding π orbitals of sulfur atoms within the sodium sulfide species that accelerates their catalytic conversion. As a result, Fe-Co/NC-based cathodes exhibit excellent cycling stability (378 mAh g-1 after 2000 cycles) and impressive rate performance (341.1 mAh g-1 under 5 A g-1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing
  • Huang, Chen
  • Usoltsev, Oleg
  • Black, Ashley P.
  • Gupta, Kapil
  • Spadaro, Maria Chiara
  • Pinto, Iván
  • Botifoll, Marc
  • Li, Canhuang
  • Herrero Martín, Javier
  • Zhou, Jinyuan
  • Ponrouch, Alexandre
  • Zhao, Ruirui
  • Balcells, Lluis
  • Zhang, Chao Yue
  • Cabot, Andreu
  • Arbiol, Jordi
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of Li2S and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g-1 at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm-2, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells., This study is part of the Advanced Materials program and In-CAEM project, supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. This work is in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICMAB-CSIC members thank the State Investigation Agency and Spanish Ministery of Science, Innovation and Universities through (PID2020-113805GB-I00) and OXISOT (PID2021-128410OB-I00). ICN2 acknowledges funding from grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.(71) This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 and European Union Next Generation EU/PRTR. IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 and ICMAB acknowledge the support from the Severo Ochoa Programme (MINECO, grant no. CEX2021-001214-S and CEX2023-001263-S). A.P. acknowledges the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant no. 715087)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic spin alignment within homologous NiS2/NiSe2 heterostructures to promote sulfur redox kinetics in lithium-sulfur batteries

  • Huang, Chen
  • Yu, Jing
  • Zhang, Chaoyue
  • Cui, Zhibiao
  • Le, Yao-Jie
  • Nan, Bingfei
  • Lu, Xuan
  • He, Ren
  • Gong, Li
  • Li, Junshan
  • Li, Canhuang
  • Xue, Qian
  • Zhou, Jin Yuan
  • Qi, Xueqiang
  • Balcells, Lluis
  • Arbiol, Jordi
  • Cabot, Andreu
The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, General it at de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU / PRTR. C. H., J. Y., C.Y. Z., and B. F. N thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717-ESTEEM3. These In situ XRD and XAS experiments were performed at the Melbourne Synchrotron, Australia. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries: A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing
  • Pinto, Iván
  • Zhang, Chao Yue
  • Zhou, Yingtang
  • Xu, Yaolin
  • Vizintin, Alen
  • Velasco-Vélez, Juan-Jesús
  • Qi, Xueqiang
  • Pan, Xiaobo
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina
  • Silva, Leonardo M. da
  • Luo, Yufeng
  • Lu, Yan
  • Huang, Chen
  • Härk, Eneli
  • Fleming, Joe
  • Chenevier, Pascale
  • Cabot, Andreu
  • Bai, Yunfei
  • Botifoll, Marc
  • Black, Ashley P.
  • An, Qi
  • Amietszajew, Tazdin
  • Arbiol, Jordi
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. ICN2 is founding member of e-DREAM. J.Y. and C.H. thank the China Scholarship Council for the financial support. A.V. thanks financial support from the Slovenian Research and Innovation Agency (ARIS) under research core program P2-0423. J.Y. and A.C. acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, the Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. P.C. acknowledges support from the 2BoSS project of the ERA-MIN3 program with the French grant number ANR-22-MIN3-0003-01 from Agence Nationale de la Recherche. C.Y.Z. acknowledge the support by the Supercomputing Center of Lanzhou University, China. We acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALING BAT ─ HORIZON-CL5-2022-D2-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three Birds with One Stone: Multifunctional Separators Based on SnSe Nanosheets Enable High-Performance Li-, Na- and K-Sulfur Batteries

  • Li, Canhuang
  • Yang, Dawei
  • Yu, Jing
  • Wang, Jian
  • Zhang, Chaoqi
  • Yang, Tianxiang
  • Huang, Chen
  • Nan, Bingfei
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Zhang, Qiaobao
  • Cabot, Andreu
Alkali metal-sulfur batteries (MSBs) are one of the most promising next-generation energy storage technologies due to their high energy density and potential for low cost. They are nonetheless constrained by the sluggish conversion of metal polysulfides (MPS) during the charge/discharge process. Herein, a multifunctional separator able to trap the MPS and catalyze their conversion in the three main MSB chemistries, Li-, Na-, and K-MSBs, is demonstrated. More in detail, SnSe nanosheets are introduced as additive into the cathode side of the glass microfiber (GF) separator of the MSB. Taking lithium-sulfur batteries (LSBs) as an example, it is demonstrated that the GF-SnSe separator (GF@SnSe) shows strong chemical affinity to lithium polysulfides (LiPS) and superior catalytic activity, inhibiting the transport of LiPSs to the anode and accelerating their conversion. Combining experimental and calculation results, the SnSe additive is shown to decrease the Li2S decomposition energy barrier. Overall, GF@SnSe separators provide significantly improved LSB rate performance and cycling stability with a 0.049% capacity decay per cycle. Besides, the GF@SnSe separator promotes the electrochemical performance of sodium-sulfur and potassium-sulfur batteries. Overall, this work presents a significant advancement in the development of multifunctional separators in LSBs as well as the emerging Na-S and K-S systems., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22) and the 2BOSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033. The authors also thank the support from the projects NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe,” by the “European Union.” C.L., J.Y., C.Z., and B.N. thank the China Scholarship Council for the scholarship support. D.W. acknowledges funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). This work was financially supported by the National Natural Science Foundation of China (Grants Nos. 52122211, 52072323), the Frontier Exploration Projects of Longmen Laboratory (Grant No. LMQYTSKT008), Q.Z. acknowledge the support of Nanqiang Young Top-notch Talent Fellowship in Xiamen University. ICN2 acknowledges the support from the Severo Ochoa Programme (CEX2021-001214-S). IREC and ICN2 were both funded by the CERCA Program/Generalitat de Catalunya (2021SGR00457, 2021SGR01581). This project has received funding from the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tungsten phosphide on nitrogen and phosphorus-doped carbon as a functional membrane coating enabling robust lithium-sulfur batteries

  • Li, Canhuang
  • Yu, Jing
  • Zhang, Chaoqi
  • Yang, Dawei
  • Wang, Jian
  • Li, Hao
  • Huang, Chen
  • Xiao, Ke
  • Cheng, Yapeng
  • Ren, Yuchuan
  • Qi, Xuede
  • Yang, Tianxiang
  • Li, Junshan
  • Wang, Jiaao
  • Henkelman, Graeme
  • Arbiol, Jordi
  • Nan, Junmin
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) hold great potential as future energy storage technology, but their widespread application is hampered by the slow polysulfide conversion kinetics and the sulfur loss during cycling. In this study, we detail a one-step approach to growing tungsten phosphide (WP) nanoparticles on the surface of nitrogen and phosphorus co-doped carbon nanosheets (WP@NPC). We further demonstrate that this material provides outstanding performance as a multifunctional separator in LSBs, enabling higher sulfur utilization and exceptional rate performance. These excellent properties are associated with the abundance of lithium polysulfide (LiPS) adsorption and catalytic conversion sites and rapid ion transport capabilities. Experimental data and density functional theory calculations demonstrate tungsten to have a sulfophilic character while nitrogen and phosphorus provide lithiophilic sites that prevent the loss of LiPSs. Furthermore, WP regulates the LiPS catalytic conversion, accelerating the Li-S redox kinetics. As a result, LSBs containing a polypropylene separator coated with a WP@NPC layer show capacities close to 1500 mAh/g at 0.1C and coulombic efficiencies above 99.5 % at 3C. Batteries with high sulfur loading, 4.9 mg cm-2, are further produced to validate their superior cycling stability. Overall, this work demonstrates the use of multifunctional separators as an effective strategy to promote LSB performance., The authors thank the support from the project NANOGEN (PID2020-116093RB-C43) funded by MCIN and by “ERDF A way of making Europe,” by the European Union. C.H.L, J.Y., C.Q.Z., C.H., Y.P.C, Y.C.R. and K.X. thank the China Scholarship Council for the scholarship support. D.W.Y. acknowledges funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). ICN2 acknowledges the support from the Severo Ochoa Programme (CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya (2021SGR00457, 2021SGR01581). This project has received funding from the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033. The calculations were supported by the Welch Foundation (F-1841) and the Texas Advanced Computing Center., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-Dimensional Transition Metal Phosphides As Cathode Additive in Robust Lithium-Sulfur Batteries

  • Zhang, Jie
  • Yang, Dawei
  • Li, Canhuang
  • Gong, Qianhong
  • Bi, Wei
  • Zheng, Xuejiao
  • Arbiol, Jordi
  • Li, Shengjun
  • Cabot, Andreu
The development of advanced cathode materials able to promote the sluggish redox kinetics of polysulfides is crucial to bringing lithium-sulfur batteries to the market. Herein, two electrode materials: namely, Zr2PS2 and Zr2PTe2, are identified through screening several hundred thousand compositions in the Inorganic Crystal Structure Database. First-principles calculations are performed on these two materials. These structures are similar to that of the classical MXenes. Concurrently, calculations show that Zr2PS2 and Zr2PTe2 possess high electrical conductivity, promote Li ion diffusion, and have excellent electrocatalytic activity for the Li-S reaction and particularly for the Li2S decomposition. Besides, the mechanisms behind the excellent predicted performance of Zr2PS2 and Zr2PTe2 are elucidated through electron localization function, charge density difference, and localized orbital locator. This work not only identifies two candidate sulfur cathode additives but may also serve as a reference for the identification of additional electrode materials in new generations of batteries, particularly in sulfur cathodes., The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors are thankful for the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 and IREC acknowledge funding from Generalitat de Catalunya 2021SGR00457 and 2021SGR01581 and European Union NextGenerationEU/PRTR. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. D. Yang thanks the China Scholarship Council for the scholarship support and the funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing
  • Yue Zhang, Chao
  • Cui, Zhibiao
  • He, Ren
  • Yang, Linlin
  • Nan, Bingfei
  • Li, Canhuang
  • Qi, Xuede
  • Qi, Xueqiang
  • Li, Junshan
  • Yuan Zhou, Jin
  • Usoltsev, Oleg
  • Simonelli, Laura
  • Arbiol, Jordi
  • Lei, Yao-Jie
  • Sun, Qing
  • Wang, Guoxiu
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1)., This work was financially supported by the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU/PRTR. C. H., J. Y. thank the China Scholarship Council for the scholarship support. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. XAS experiments were performed at CLAESS beamline of ALBA Synchrotron with the collaboration of ALBA staff. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors acknowledge the support of the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.51, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Balancing Electronic Spin State via Atomically-Dispersed Heteronuclear Fe-Co Pairs for High-Performance Sodium-Sulfur Batteries

  • Li, Canhuang
  • Yu, Jing
  • Yang, Dawei
  • Li, Hao
  • Cheng, Yapeng
  • Ren, Yuchuan
  • Bi, Xiaoyu
  • Ma, Jiachen
  • Zhao, Ruirui
  • Zhou, Yingtang
  • Wang, Jian
  • Huang, Chen
  • Li, Junshan
  • Pinto, Iván
  • Arbiol, Jordi
  • Zhang, Haining
  • Xin, Sen
  • Cabot, Andreu
Room-temperature sodium-sulfur (Na-S) batteries are emerging as a promising next-generation energy storage technology, offering high energy densities at low cost and utilizing abundant elements. However, their practical application is hindered by the shuttle effect of sodium-polysulfides and the sluggish kinetics of sulfur redox reactions. In this study, we demonstrate a heteronuclear diatomic catalyst featuring Fe and Co bimetallic sites embedded in nitrogen-doped hollow carbon nanospheres (Fe-Co/NC) as an effective sulfur host at the cathode of Na-S batteries. Aberration-corrected high-angle annular dark field scanning transmission electron microscopy demonstrates the presence of isolated Fe-Co atomic pairs, while synchrotron radiation X-ray absorption fine structure analysis confirms the (Fe-Co-N6) coordination structure. Density functional theory calculations show that the introduction of Fe atoms induces electron delocalization in Co(II), shifting the electronic configuration from a low-spin to a higher-spin state. This shift enhances the hybridization of the Co dz2 orbitals with the antibonding π orbitals of sulfur atoms within the sodium sulfide species that accelerates their catalytic conversion. As a result, Fe-Co/NC-based cathodes exhibit excellent cycling stability (378 mAh g-1 after 2000 cycles) and impressive rate performance (341.1 mAh g-1 under 5 A g-1)., C.H.L. and J.Y. thank the China Scholarship Council for the scholarship support. Dr. J.W. thanks the fellowship awarded by Alexander von Humboldt Foundation. D.W.Y. thanks the China Scholarship Council for the scholarship support and the funding from the National Natural Science Foundation of China (NSFC, grant no. 22305064). J.S.L. is grateful for the project supported by the Natural Science Foundation of Sichuan (2025ZNSFSC0139). J.W. thanks the funding support from Key Laboratory of Engineering Dielectrics and Its Application (Harbin University of Science and Technology) (no. KFM202507, Ministry of Education). A.C. acknowledges support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021SGR01581 and European Union Next Generation EU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant no.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation of unpaired electrons to promote electron transfer at the cathode of room-temperature sodium sulfur batteries

  • Huang, Chen
  • Yu, Jing
  • Lei, Yao-Jie
  • Usoltsev, Oleg
  • Gong, Li
  • Cui, Zhibiao
  • Li, Junshan
  • Li, Canhuang
  • Nan, Bingfei
  • Lu, Xuan
  • He, Ren
  • Qi, Xuede
  • Xue, Qian
  • Chai, Jiali
  • Ren, Yuchuan
  • Bi, Xiaoyu
  • Cheng, Yapeng
  • Zhou, Jin Yuan
  • Skorynina, Alina
  • Bugaev, Aram
  • Martínez-Alanis, Paulina R.
  • Balcells, Lluis
  • Arbiol, Jordi
  • Zhang, Chao Yue
  • Cabot, Andreu
Room-temperature sodium-sulfur batteries offer significant potential for energy storage, but they are hindered by slow Na-S reaction kinetics. While trial and error screening shows cobalt-based sulfur hosts to effectively activate this reaction, this study aims to enable a more rational catalyst design by exploring how cobalt's electronic configuration within the cathode composite affects its activity and how this configuration can be adjusted through charge injection from neighboring atoms. Cobalt oxide nanoparticles coated with carbon nitride serve as a model system for this purpose, where N atoms in C3N4 donate electrons to Co, generating additional unpaired Co 3d electrons, that are then transferred to sodium polysulfides with a reduced kinetic barrier. Experimental and theoretical analyses reveal that this activated electronic state boosts charge transfer, while the adjusted d-band center improves adsorption energy, lowering the reaction energy barrier for the polysulfide conversion rate-determining step., This work was financially supported by the SyDECat and AMaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 and PID2023-149158OB-C43, respectively), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985 /AEI /10.13039 /501100011033, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and Next Generation EU / PRTR-C17.I1. C. H., J. Y., C.Y. Z., and B. F. N thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, General it at de Catalunya. ICN2 is a founding member of e-DREAM[65]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Doping Activation of Anion-Mediated Electron Transfer in Catalytic Reactions

  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Sun, Guowen
  • Balcells, Lluis
  • Li, Jiayue
  • Qi, Xuede
  • Yi, Cheng Zhu
  • Herrero Martín, Javier
  • Simonelli, Laura
  • Fauth, François
  • He, Ren
  • Pan, Xiaobo
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Cabot, Andreu
Heteroatom-doping has emerged as a transformative approach to producing high-performance catalysts, yet the current trial-and-error approach to optimize these materials remains ineffective. To enable the rational design of more efficient catalysts, models grounded in a deeper understanding of catalytic mechanisms are essential. Existing models, such as d-band center theory, fall short in explaining the role of dopants, particularly when these dopants do not directly interact with reactants. In this study, we synthesize various heteroatom-doped catalysts to explore the correlation between the electronic effects of the dopants and catalyst activity. Using Co-MoS2 as a model catalyst and the Li-S redox reaction within the cathode of Li-S batteries as a test system, we show the interaction between cobalt sites and adjacent lattice sulfur atoms disrupts the intrinsic structural and electronic symmetry of MoS2. This disruption enhances the transfer of spin-polarized electrons from metal centers to lattice sulfur and promotes the adsorption of reactant intermediates. Furthermore, by analyzing 20 different dopant elements, we establish a linear relationship between the electron density in the lattice sulfur and catalyst activity toward the reduction of sulfur species, a relationship that extends to other catalytic systems, such as the hydrogen evolution reaction., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 and European Union Next Generation EU/PRTR. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Authors acknowledge the use of funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and “OXISOT” (PID2021-128410OB-I00). J.L. is grateful for the Natural Science Foundation of Sichuan project (2025ZNSFSC0139)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid electron transfer in Co0.85Se-MoSe2/NCP heterostructure catalyst towards robust lithium-sulfur batteries

  • Qi, Xuede
  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Yu, Ao
  • Xue, Qian
  • Li, Canhuang
  • Li, Kun
  • Lu, Xuan
  • Ren, Yuchuan
  • Bi, Xiaoyu
  • Zhang, Chaoqi
  • Li, Junshan
  • Zhou, Jin Yuan
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) are a promising candidate for next-generation energy storage solutions. However, challenges such as the shuttling effect and sluggish Li-S reaction kinetics of lithium polysulfides hinder their practical application. In this work, we present a mixed-phase heterostructure comprising Co0.85Se and MoSe2, supported on nitrogen-doped carbon polyhedrons (NCP), as an effective sulfur host in the LSB cathode. Through a combination of theoretical calculations and experimental validation, we demonstrate that the Co0.85Se-MoSe2 heterointerface significantly enhances electron transfer efficiency, thereby boosting the overall reaction kinetics of the sulfur cathode. As a result, the Co0.85Se-MoSe2/NCP/S electrodes exhibit initial specific capacities exceeding 1500 mAh g−1 at 0.1 C and retain 666 mAh g−1 at 3 C, with a capacity fade rate of 0.044% per cycle over 500 cycles at 1.0 C. Notably, even at a high sulfur loading of 3 mg cm−2 and a reduced electrolyte volume of 6.7 μL mgS−1, the Co0.85Se-MoSe2/NCP/S electrodes maintain a capacity of 432 mAh g−1 after 100 cycles at 0.2 C., The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033. The authors acknowledge funding from the Generalitat de Catalunya 2021SGR01581 and 2021SGR00457, the European Union NextGenerationEU/PRTR, the Natural Science Foundation of Chongqing (No. 2023NSCQ-MSX1669) and the Science and Technology Research Program of Chongqing Municipal Education Commission (No. KJZD-K202401110). The authors acknowledge the support of the Supercomputing Center of Lanzhou University, China. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM [46]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium–sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede
  • Sun, Guo Wen
  • Zhang, Chaoqi
  • He, Ren
  • Yang, Dawei
  • Li, Canhuang
  • Li, Junshan
  • Qi, Xueqiang
  • Rubio García, Javier
  • Estrader, Marta
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Cabot, Andreu
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and from Generalitat de Catalunya 2021 SGR 01581 and European Union NextGenerationEU/PRTR. J. Yu, C. Huang, C. Li, and Y. Ren thank the China Scholarship Council for the scholarship support. G. W. Sun thanks the Fundamental Research Funds for the Central Universities (lzujbky-2023-it36), and the Outstanding Graduate “Innovation Star” Project of Gansu Provincial Education Department, China (No.2023CXZX-058). J. S. Li acknowledges financial support from the Natural Science Foundation of Sichuan province (2022NSFSC1229). The authors also greatly acknowledge the support from the Supercomputing Center of Lanzhou University, China. D.W.Y. acknowledges support from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). M.E. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d'Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022. The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the Advanced Materials programme (Project In-CAEM) by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors are grateful for support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is founding member of e-DREAM, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing
  • Usoltsev, Oleg
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto, Iván
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi
  • Lu, Xuan
  • Gupta, Kapil
  • Botifoll, Marc
  • Simonelli, Laura
  • Fauth, François
  • Zhou, Jin Yuan
  • Llorca, Jordi
  • Lu, Yan
  • Zhang, Chao Yue
  • Arbiol, Jordi
  • Cabot, Andreu
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly Li2S nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid Li2S nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications., IREC and HZB acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALINGBAT ─ HORIZON-CL5-2022-D2-01). J.Y. and C.H. thank the China Scholarship Council for the financial support. C.Y.Z. and J.Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. I.M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101081337. XAS experiments were performed at the beamline-22-CLÆSS (Proposal Number: 2024068488),[50] and operando XRD was performed in beamline BL04-MSPD (Grant Number: 2023097750) at ALBA Synchrotron, Spain. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to projects MICIN/FEDER PID2024-156765OB-C21 and CEX2023-001300-M (MCIN/AEI 10.13039/501100011033). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.[51], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operando Observation of Inter-Particle Li+ Transport in Layered Bimetallic Sulfides for High-Rate Lithium-Sulfur Batteries

  • Chen, Lei
  • Chen, Kaizhi
  • Yu, Jing
  • Yang, Dawei
  • Wang, Yunxiao
  • Li, Canhuang
  • Lei, Yao-Jie
  • Zhang, Jie
  • Mou, Jirong
  • Gong, Qianhong
  • Bi, Wei
  • Yuan, Chao
  • Xiao, Zhenyu
  • Xu, Ligang
  • Diao, Jiefeng
  • Tang, Mingxue
  • Henkelman, Graeme
  • Arbiol, Jordi
  • Zhou, Guangmin
  • Cabot, Andreu
  • Lai, Wei-Hong
The slow reaction kinetics, particularly at high rates, hinder the practical use of lithium-sulfur batteries (LSBs). To overcome the inadequate ion transport in conventional electrodes, a two-dimensional layered bimetallic sulfide (FeMo2S4) as a sulfur host, creating fast ion-conduction pathways is developed. Using a free-standing FeMo2S4/carbon cloth cathode with a Li2S6 catholyte, high-rate performance is achieved. Crucially, in situ high-resolution TEM directly visualized rapid inter-particle lithium ion transport between the layered FeMo2S4 flakes, offering direct evidence of enhanced kinetics. This phenomenon, combined with strong polysulfide adsorption and high catalytic activity, boosts reaction rates. The Li2S6-based battery delivered a high initial capacity of 1516 mAh g−1 and outstanding stability with only 0.028% decay per cycle at 3C. This work highlights the effectiveness of layered hosts with fast ion channels and bimetallic catalysis for durable, high-rate LSBs., Prof. D. W. Yang and Prof. W. H. Lai thank for the funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064 and Grants No. 22575055). Prof. D. W. Yang also thanks for the funding from the Henan Provincial Science and Technology Research and Development Joint Fund-Young Scientist Project (Grants No. 235200810054). A. Cabot acknowledges support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021SGR01581 and European Union Next Generation EU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant Number.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards circular batteries: A water-soluble, recyclable, self-healing binder for aqueous-processed sulfur cathodes

  • Ren, Yuchuan
  • Xue, Qian
  • Lu, Liqiang
  • Li, Canhuang
  • Li, Guanjie
  • Kardjilov, Nikolay
  • Manke, Ingo
  • Zhao, Jiaqi
  • Lu, Xuan
  • Yu, Jing
  • Zeng, Guifang
  • Bi, Xiaoyu
  • Zhang, Shengnan
  • Berlanga, Armando
  • Huang, Chen
  • Qi, Xuede
  • Qi, Xueqiang
  • Arbiol, Jordi
  • Lu, Yan
  • Tan, Guoqiang
  • Guo, Zaiping
  • Cabot, Andreu
Sulfur cathodes have attracted considerable attention due to their potential for high energy density and cost-effectiveness. However, their limited stability, in part stemming from volume changes during cycling and the dissolution and migration of metal polysulfides, has hindered their commercialization. Binders play a critical role in preventing electrode delamination, while potentially contributing additional functionalities, such as trapping polysulfides. In this work, we introduce an aqueous-processable sulfur cathode binder composed of polyvinyl alcohol (PVA) and polyethylene glycol (PEG). Multiple hydrogen bonding interactions provided by the PVA/PEG binder hydrogen-bond network enhance metal-ion diffusion and trap polysulfides, thereby reducing their dissolution. Additionally, microcracks generated during the cycling can be healed by the dynamic hydrogen-bond network. Thereby, in lithium-sulfur cells, PVA/PEG-based cathodes exhibit an ultralow per-cycle capacity fade of 0.0023% over 600 cycles at 1C, and deliver up to 677 mAh/g in lean-electrolyte pouch cells (E/S = 4 µL/mg), retaining 99% of the initial capacity after 100 cycles at 0.1C in pouch cell. Theoretical calculations and molecular dynamics simulations confirm the superior adsorption energy and repairability of the PVA/PEG binder, reinforcing its ability to stabilize the cathode. Additionally, PVA/PEG-based cathodes exhibit excellent flame retardancy, support eco-friendly and closed-loop recycling due to the binder’s water solubility, which allows for easy electrode material reutilization., This work was partially funded by the European Union (Grant agreement No. 101104006 — HEALING BAT — HORIZON-CL5-2022-D2-01). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and from the Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU/PRTR. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. YC.R., Q.X. and LQ.L did the same contribution for this work. YC. R., Q.X., CH. L., X.L., J.Y., GF.Z., XY.B., C.H., thank for the China Scholarship Council for the scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfur cathodes for next-generation batteries

  • Manzini, Alessandra
  • Martynova, Irina
  • Yu, Jing
  • Bi, Xiaoyu
  • Jacas Biendicho, Jordi
  • Arbiol, Jordi
  • Sun, Qing
  • Zhang, Chaoqi
  • Cabot, Andreu
The global transition toward efficient, sustainable, and cost-effective energy storage is accelerating, driven by efforts to decarbonize key sectors. Among emerging technologies, sulfur-based conversion cathodes have garnered significant attention as promising candidates for next-generation batteries due to their exceptional theoretical energy density, low cost, and material abundance. Their successful deployment could advance critical applications, including electric mobility, renewable energy integration, and grid stabilization. Despite this potential, sulfur cathodes face persistent limitations that have prevented commercialization. Unlike reviews focusing primarily on materials innovations in idealized settings, this work provides a critical, user-focused assessment that prioritizes challenges of scalable manufacturing and operation under practical conditions. We analyze fundamental failure mechanisms under realistic parameters, including high sulfur loading, lean electrolyte, and limited lithium anode excess, that cause performance to diverge dramatically from target metrics. By synthesizing recent advancements in mechanistic understanding, host design, and interface engineering, we identify key bottlenecks hindering large-scale production. The review concludes with strategic pathways spanning materials design, device architecture, and market integration to bridge the gap between laboratory research and real-world application., IREC acknowledges financial support from the European Union (Grant agreement No. 101104006 - HEALINGBAT - HORIZON-CL5-2022-D2-01). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. J.Y. thanks the China Scholarship Council for the financial support. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from the Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM217. Co-funded by the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Three Birds with One Stone, Multifunctional Separators Based on SnSe Nanosheets Enable High-Performance Li-, Na- and K-Sulfur Batteries

  • Li, Canhuang
  • Yang, Dawei|||0000-0002-3842-8286
  • Yu, Jing|||0000-0002-7620-745X
  • Wang, Jian
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Tianxiang
  • Huang, Chen
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Zhang, Qiaobao|||0000-0002-3584-5201
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Alkali metal-sulfur batteries (MSBs) are one of the most promising next-generation energy storage technologies due to their high energy density and potential for low cost. They are nonetheless constrained by the sluggish conversion of metal polysulfides (MPS) during the charge/discharge process. Herein, a multifunctional separator able to trap the MPS and catalyze their conversion in the three main MSB chemistries, Li-, Na-, and K-MSBs, is demonstrated. More in detail, SnSe nanosheets are introduced as additive into the cathode side of the glass microfiber (GF) separator of the MSB. Taking lithium-sulfur batteries (LSBs) as an example, it is demonstrated that the GF-SnSe separator (GF@SnSe) shows strong chemical affinity to lithium polysulfides (LiPS) and superior catalytic activity, inhibiting the transport of LiPSs to the anode and accelerating their conversion. Combining experimental and calculation results, the SnSe additive is shown to decrease the LiS decomposition energy barrier. Overall, GF@SnSe separators provide significantly improved LSB rate performance and cycling stability with a 0.049% capacity decay per cycle. Besides, the GF@SnSe separator promotes the electrochemical performance of sodium-sulfur and potassium-sulfur batteries. Overall, this work presents a significant advancement in the development of multifunctional separators in LSBs as well as the emerging Na-S and K-S systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tungsten phosphide on nitrogen and phosphorus-doped carbon as a functional membrane coating enabling robust lithium-sulfur batteries

  • Li, Canhuang
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Jian
  • Li, Hao|||0000-0002-4740-5908
  • Huang, Chen
  • Xiao, Ke
  • Cheng, Yapeng|||0000-0002-9218-9095
  • Ren, Yuchuan|||0000-0002-6870-4149
  • Qi, Xuede|||0009-0008-5723-3629
  • Yang, Tianxiang
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Jiaao|||0000-0002-4944-4951
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Nan, Junmin
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) hold great potential as future energy storage technology, but their widespread application is hampered by the slow polysulfide conversion kinetics and the sulfur loss during cycling. In this study, we detail a one-step approach to growing tungsten phosphide (WP) nanoparticles on the surface of nitrogen and phosphorus co-doped carbon nanosheets (WP@NPC). We further demonstrate that this material provides outstanding performance as a multifunctional separator in LSBs, enabling higher sulfur utilization and exceptional rate performance. These excellent properties are associated with the abundance of lithium polysulfide (LiPS) adsorption and catalytic conversion sites and rapid ion transport capabilities. Experimental data and density functional theory calculations demonstrate tungsten to have a sulfophilic character while nitrogen and phosphorus provide lithiophilic sites that prevent the loss of LiPSs. Furthermore, WP regulates the LiPS catalytic conversion, accelerating the Li-S redox kinetics. As a result, LSBs containing a polypropylene separator coated with a WP@NPC layer show capacities close to 1500 mAh/g at 0.1C and coulombic efficiencies above 99.5 % at 3C. Batteries with high sulfur loading, 4.9 mg cm, are further produced to validate their superior cycling stability. Overall, this work demonstrates the use of multifunctional separators as an effective strategy to promote LSB performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • Chen, Jiakun
  • Lai, Wei-Hong
  • Lei, Yao-Jie
  • Nan, Bingfei|||0000-0002-7128-6056
  • Lu, Xuan|||0000-0003-2453-2805
  • He, Ren|||0000-0003-3712-5539
  • Gong, Li
  • Li, Junshan|||0000-0002-1482-1972
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Xue, Qian
  • Zhou, Jin Yuan
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS/NiSe heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS/NiSe@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS/NiSe heterostructure promotes the spin splitting of the 3d orbital, driving the Ni transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS/NiSe@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻ at 0.1C), excellent rate capability (572 mAh·g⁻ at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻), high initial capacities of 1173 mAh·g⁻ (7.27 mAh·cm⁻) are measured at 0.1C, and 1058 mAh·g⁻ is retained after 300 cycles.