Pasar al contenido principal

INTERCONVERSION ESPIN-CARGA EN HETEROESTRUCTURAS DE OXIDOS PARA DISPOSITIVOS SOT

PID2021-128410OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identifying the Role of the Cationic Geometric Configuration in Spinel Catalysts for Polysulfide Conversion in Sodium-Sulfur Batteries

  • Zhang, Chao Yue
  • Lu, Xuan|||0000-0003-2453-2805
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Huang, Chen
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Sun, Gengzhi|||0000-0002-8000-8912
  • Zhou, Jin Yuan
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
An AB2X4 spinel structure, with tetrahedral A and octahedral B sites, is a paradigmatic class of catalysts with several possible geometric configurations and numerous applications, including polysulfide conversion in metal-sulfur batteries. Nonetheless, the influence of the geometric configuration and composition on the mechanisms of catalysis and the precise manner in which spinel catalysts facilitate the conversion of polysulfides remain unknown. To enable controlled exposure of single active configurations, herein, Cotd2+ and Cooh3+ in Co3O4 catalysts for sodium polysulfide conversion are in large part replaced by Fetd2+ and Feoh3+, respectively, generating FeCo2O4 and CoFe2O4. Through an examination of electrochemical activation energies, the characterization of symmetric cells, and theoretical calculations, we determine that Cooh3+ serves as the active site for the breaking of S-S bonds, while Cotd2+ functions as the active site for the formation of S-Na bonds. The current study underlines the subtle relationship between activity and geometric configurations of spinel catalysts, providing unique insights for the rational development of improved catalysts by optimizing their atomic geometric configuration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Gupta, Kapil|||0000-0002-4826-6620
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Pinto-Huguet, Ivan
  • Botifoll, Marc|||0000-0002-4876-6393
  • Li, Canhuang
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Zhou, Jin Yuan
  • Ponrouch, Alexandre|||0000-0002-8232-6324
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of LiS and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Li, Junshan|||0000-0002-1482-1972
  • Yuan Zhou, Jin
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Simonelli, Laura|||0000-0001-5331-0633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lei, Yao-Jie
  • Sun, Qing|||0000-0002-9145-7772
  • Wang, Guoxiu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of Twin's Landscape on the Magnetic Damping of La2/3Sr1/3MnO3 Thin Films

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Frontera, Carlos|||0000-0002-0091-4756
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
Understanding the origin and mechanisms of magnetic damping in complex oxide materials is crucial for optimizing spin dynamics and tailoring their properties for specific spintronic applications. Ferromagnetic resonance spectroscopy (FMR) technique has been used to investigate the magnetic damping of multiple LaSrMnO (LSMO) epitaxial thin films with similar thickness and identical DC magnetic properties. However, the dynamic magnetic properties exhibit noticeable variations among samples. Microstructural analyses using X-ray diffraction (XRD) and atomic force microscopy (AFM), confirm that the samples are structurally identical, except for minute differences in the miscut angles of the substrates. Nevertheless, when examining the samples using backscattered electron (BSE) images in scanning electron microscopy (SEM), significant disparities in the twin distribution are observed. These variations in the twin distribution directly correlate with the observed differences in the damping values. A careful image analysis of BSE images allows to demonstrate that the increase of damping is due to the pinning of the magnetization in the twin boundaries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spin conduction and interfacial effects in La2/3Sr1/3MnO3/NiO/Pt heterostructures

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Frontera, Carlos|||0000-0002-0091-4756
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
In this work we report on the generation and transport of pure spin currents in LaSrMnO(LSMO)/NiO/Pt heterostructures. Pure spin currents, generated by means of spin pumping in the LSMO layer, are transmitted through the NiO layer and detected by measuring the transverse voltage signal generated by the inverse spin Hall effect (ISHE) in the Pt layer. The spin current transmission is studied as a function of the NiO thickness and temperature. NiO layers grown at room temperature are polycrystalline and their microstructural and magnetic features clearly depend on thickness. Scanning transmission electron microscopy techniques revealed that homogeneous conformal coating of the LSMO layer is only achieved for NiO layer thicknesses above about 2 nm. Below this critical thickness the NiO layer is discontinuous and its main role would be to disturb the LSMO/Pt interface causing it to behave as something similar to an insulating barrier. Magnetic measurements indicate that NiO layers are paramagnetic (PM) well below room temperature. In agreement with these observations, the amplitude of the ISHE voltage signal decreases monotonically on lowering temperature and makes evident that there are two spin conduction regimes as a function of the NiO layer thickness with different spin diffusion lengths. For thin discontinuous NiO layers a spin diffusion length of λ≈0.8 nm is found, which is slightly larger than typical values found for insulating barriers, but definitely smaller than λ≈3.8 nm found for NiO layer thickness above 2 nm. The latter being similar to λ previously reported for epitaxial NiO layers. Our findings indicate that inserting a PM NiO insulating layer of optimal thickness improves the spin transparency of the LSMO/Pt interface. Additionally, the results suggest that spin conduction through the NiO layer is likely driven by magnetic correlations and short-range thermal magnons.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain Relief and Domain Architecture in Epitaxial NiO Films on La2/3Sr1/3MnO3/SrTiO3 for Spin-Transport Engineering

  • Chen, Shoulong
  • Frontera, Carlos|||0000-0002-0091-4756
  • Toda-Casaban, Meritxell
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
This study reports on the epitaxial growth and structural characterization of ultrathin NiO-films deposited by magnetron sputtering on LaSrMnO (LSMO) films grown on SrTiO (STO) substrates with (001)- and (111)-orientations. X-ray diffraction and atomic-force microscopy show that all NiO layers are single-phase, face-centered pseudo-cubic, atomically smooth, root-main-square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High-resolution reciprocal-space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit-cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration-corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)-oriented samples, the four antiferromagnetic T-domains are oblique to the sample plane, while on the (111) case, one lies in-plane. This in-plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high-performance spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Crystallographic Engineering of Spin Transport in Antiferromagnetic NiO Thin Films

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Bozzo, Bernat
  • Frontera, Carlos|||0000-0002-0091-4756
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
In this work, we investigate how the crystallographic growth direction influences spin current transmission in antiferromagnetic (AF) NiO thin films. By manipulating epitaxial growth, we explored the spin transport characteristics in La2/3Sr1/3MnO3/NiO/Pt heterostructures grown on top of (001)- and (111)-oriented SrTiO3 substrates, varying the NiO barrier thickness (tNiO). Spin currents were generated via spin pumping (SP), and detection was done by the inverse spin Hall effect (ISHE). X-ray diffraction and high-resolution electron microscopy techniques confirmed high-quality epitaxial films with nearly atomically sharp interfaces and similar dislocation distributions, irrespective of the growth direction. Nevertheless, epitaxially engineered (111) heterostructures exhibited superior spin transport properties, including lower magnetic damping (α), longer spin diffusion lengths (λSd), and higher spin mixing conductance (g↑↓). The temperature dependence of the ISHE voltage signal (VISHE) also showed orientation-dependent behavior: while (001)-oriented samples followed a monotonic trend, (111)-oriented samples displayed a peak that shifted to higher temperatures with increasing tNiO, associated with the emergence of AF ordering. Moreover, (111)-oriented samples demonstrated notable spin current amplification at room temperature, peaking at tNiO ≈ 1 nm before decaying quasi-exponentially, indicative of spin diffusion-mediated conduction. Although the spin diffusion length in (111)-oriented samples was roughly double that of their (001)-oriented counterparts, it was still too short to be explained by angular momentum transport by mobile antiferromagnons through NiO. Instead, these findings point to a mechanism involving magnetic correlations and short-range thermal magnons. The superior spin transport properties and the enhanced spin conduction in (111)-oriented samples are primarily attributed to a synergistic combination of interfacial and dynamic effects, a more favorable Néel vector alignment and distinct interface symmetry, which can enhance spin-Hall effects or enable different spin textures. Overall, this study underscores the pivotal role of the Néel vector and crystallographic orientation in AF spin transport, providing valuable insights for the design and optimization of spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On-chip planar metasurfaces for magnetic sensors with greatly enhanced sensitivity

  • Barrera Català, Aleix|||0000-0002-7146-0026
  • Fourneau, Emile
  • Bort-Soldevila, Natanael|||0000-0001-9765-1843
  • Cunill-Subiranas, Jaume|||0000-0002-5612-2846
  • Valle, Nuria del|||0000-0003-2608-5009
  • Lejeune, Nicolas|||0000-0001-6003-1472
  • Staňo, Michal|||0000-0002-7440-7191
  • Smekhova, Alevtina|||0000-0003-0946-2909
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Navau, Carles|||0000-0003-4763-5305
  • Uhlíř, Vojtěch|||0000-0002-0512-6329
  • Bending, Simon|||0000-0002-4474-2554
  • Valencia, Sergio|||0000-0002-3912-5797
  • Silhanek, Alejandro|||0000-0001-9551-5717
  • Palau, Anna|||0000-0002-2217-164X
Metamaterials with engineered structures have been extensively investigated for their capability to manipulate optical, acoustic, or thermal waves. In particular, magnetic metamaterials with precise geometry, shape, size and arrangement of their elemental blocks may be used to concentrate, focus, or guide magnetic fields. In this work, we show the potential of using soft-magnetic permalloy (Py) metasurfaces to tailor the physical properties of other magnetic structures at the local scale. As an illustration, the magnetic response of a Cobalt (Co) sensor bar placed at the core of a Py metasurface is investigated as a function of in-plane magnetic fields through the planar Hall effect. Our findings reveal that by appropriately selecting the metasurface geometrical parameters, we can adjust the Co bar's coercive field and susceptibility, leading to a huge enhancement in sensor sensitivity of over 2 orders of magnitude. Micromagnetic simulations, coupled with magneto-transport equations and X-ray photoemission electron measurements (XPEEM) with contrast from magnetic circular dichroism (XMCD), accurately capture this effect and provide insights into the underlying physical mechanisms. These findings can potentially enhance the performance and versatility of magnetic functional devices by using specifically designed structural magnetic materials.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray Absorption Spectroscopy Study of Thickness Effects on the Structural and Magnetic Properties of Pr2-δNi1-xMn1+xO6-y Double Perovskite Thin Films

  • Bernal Salamanca, Mónica E.
  • Herrero Martín, Javier
  • Konstantinović, Zorica
  • Balcells, Lluis
  • Pomar, Alberto
  • Martínez Perea, Benjamín
  • Frontera, Carlos
In this work, we report a systematic study of the influence of film thickness on the structural and magnetic properties of epitaxial thin films of Pr2-δNi1-xMn1+xO6-y (PNMO) double perovskite grown on top of two different (001)-SrTiO3 and (001)-LaAlO3 substrates by RF magnetron sputtering. A strong dependence of the structural and magnetic properties on the film thickness is found. The ferromagnetic transition temperature (TC) and saturation magnetization (Ms) are found to decrease when reducing the film thickness. In our case, the thinnest films show a loss of ferromagnetism at the film-substrate interface. In addition, the electronic structure of some characteristic PNMO samples is deeply analyzed using X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) measurements and compared with theoretical simulations. Our results show that the oxidation states of Ni and Mn ions are stabilized as Ni2+ and Mn4+, thus the ferromagnetism is mainly due to Ni2+-O-Mn4+ superexchange interactions, even in samples with poor ferromagnetic properties. XMCD results also make evident large variations on the spin and orbital contributions to the magnetic moment as the film's thickness decreases., This research was founded by the Spanish Ministry of Science and Innovation through the Severo Ochoa (CEX2019-000917-S), SPINCURIOX (RTI2018-099960-BI00), and OXISOT (PID2021-128410OB-I00) projects, which were co-financed by the European Regional Development Funds. ZK acknowledges the support of the Institute of Physics Belgrade through a grant from the Serbian Ministry of Education, Science, and Technological Development., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Artificial Graphene Spin Polarized Electrode for Magnetic Tunnel Junctions

  • Zatko, Victor
  • Galceran, Regina
  • Galbiati, Marta
  • Peiro, Julian
  • Godel, Florian
  • Kern, Lisa-Marie
  • Perconte, David
  • Ibrahim, Fatima
  • Hallal, Ali
  • Chshiev, Mairbek
  • Martínez Perea, Benjamín
  • Frontera, Carlos
  • Balcells, Lluis
  • Kidambi, Piran R.
  • Robertson, John
  • Hofmann, Stephan
  • Collin, Sophie
  • Petroff, Frédéric
  • Martin, Marie-Blandine
  • Dlubak, Bruno
  • Seneor, Pierre
2D materials offer the ability to expose their electronic structure to manipulations by a proximity effect. This could be harnessed to craft properties of 2D interfaces and van der Waals heterostructures in devices and quantum materials. We explore the possibility to create an artificial spin polarized electrode from graphene through proximity interaction with a ferromagnetic insulator to be used in a magnetic tunnel junction (MTJ). Ferromagnetic insulator/graphene artificial electrodes were fabricated and integrated in MTJs based on spin analyzers. Evidence of the emergence of spin polarization in proximitized graphene layers was observed through the occurrence of tunnel magnetoresistance. We deduced a spin dependent splitting of graphene's Dirac band structure (∼15 meV) induced by the proximity effect, potentially leading to full spin polarization and opening the way to gating. The extracted spin signals illustrate the potential of 2D quantum materials based on proximity effects to craft spintronics functionalities, from vertical MTJs memory cells to logic circuits., This work has received funding from the European Union’s H2020 Future and Emerging Technologies “Graphene Flagship” (Grant Core3 No. 881603), “SINFONIA” (No. 881603) projects and a Grant Agreement Marie Skłodowska Curie “ITN Spinograph” (No. 697904), as well as from EPSRC (EP/P005152/1, EP/K016636/1). This research is supported by a public grant overseen by the French National Research Agency (ANR) as part of the “Investissements d’Avenir” program Labex NanoSaclay (ANR-10-LABX-0035), as well as grants STEM2D (ANR-19-CE24-0015), MIXES (ANR-19-CE09-0028), and by the Flag-ERA JTC 2019 project “SOGraphMEM” (ANR-19-GRFI-0001-07). This work has also received fundings from the “Spanish ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan
  • Xue, Qian
  • Han, Xu
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Zuo, Yong
  • Du, Ruifeng
  • Balcells, Lluis
  • Arbiol, Jordi
  • Llorca, Jordi
  • Qi, Xueqiang
  • Cabot, Andreu
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies., The authors thank the support from the projects Combenergy (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. The authors also thank the Spanish Ministry of Science and Innovation through the Severo Ochoa (CEX2019-000917-S) and OXISOT (PID2021- 128410OB-I00) projects. X.W., X.H., C.X., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT Ph.D. grant (SEV-2013-0295-17-1). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia program. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience Ph.D. program and Universitat Autònoma de Barcelona Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sodium-Sulfur Batteries with Unprecedented Capacity, Cycling Stability and Operation Temperature Range Enabled by a CoFe2O4 Catalytic Additive Under an External Magnetic Field

  • Zhang, Chao Yue
  • Gong, Li
  • Zhang, Chaoqi
  • Cheng, Xu
  • Balcells, Lluis
  • Zeng, Guifang
  • Jacas Biendicho, Jordi
  • Li, Junshan
  • Sun, Geng Zhi
  • Zhou, Jin Yuan
  • Cabot, Andreu
The electrochemical performance of room-temperature sodium-sulfur batteries (SSBs) is limited by slow reaction kinetics and sulfur loss in the form of sodium polysulfides (SPSs). Here, it is demonstrated that through electron spin polarization, at no additional energy cost, an external magnetic field (M on) generated by a permanent magnet can significantly improve the SPSs adsorption capacity and reaction dynamics of a ferrimagnetic sulfur host. More specifically, the preparation of a carbon nanofiber/CoFe2O4/S (CNF/CoFe2O4/S) cathode with unprecedented performance and stability at ambient temperature is detailed when M on. It is experimentally and theoretically demonstrated that the magnetic field polarizes the electrons of Co ions, enhancing the adsorption of SPSs and their catalytic conversion. CNF/CoFe2O4/S cathodes with spin polarization provide unprecedented decay rates down to 0.0039% per cycle at 1.0 C for 2700 cycles. The performance of SSBs is further tested, which has 248 mAh g−1 under 1.0 C after 100 cycles when M on. Furthermore, it is evidenced that even when removing the external magnetic field, the magnetic polarization effect persists, opening the door for practical applications. This study not only demonstrates an effective strategy to improve electrochemical performance in SSBs, but also contributes to the enrichments of spin effects in the fields of electrocatalysis., A.C. thanks financial support from the Combenergy project (PID2019−105490RB−C32) from the Spanish Ministerio de Ciencia e Innovación. This work was supported by the Innovation fund for small and Medium-sized Enterprises in Gansu Province (No.22CX3JA006), Lanzhou Talent Innovation and Entrepreneurship Project (No.2022-2-81), National Natural Science Foundation of China (Grant Nos. 61801200) and partially by the Fundamental Research Funds for the Central Universities (Grant Nos.: lzujbky−2021−it33). L.B. thanks financial support from the Ministry of Science and Innovation of Spain through the OXISHOT project (PID2021-128410OB-I00) C.Y.Z., L.G., C.Q.Z., X.C., and G.F.Z. thank the China Scholarship Council for the scholarship support. J.S.L. thanks financial support from Natural Science Foundation of Sichuan province (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tin Oxide Nanoparticles via Solar Vapor Deposition for Hexavalent Chromium Remediation

  • Simeonidis, Konstantinos
  • Kalaitzidou, Kyriaki
  • Asimakidou, Theopoula
  • Martínez Boubeta, Carlos
  • Makridis, Antonios
  • Haeussler, Anita
  • Vourlias, Georgios
  • Balcells, Lluis
Tin oxide nanoparticles optimized to capture low concentrations of hexavalent chromium from water were developed through a facile, scalable, and low-cost one-step solar vapor deposition methodology. Considering the preservation of high electron donation capacity as the key to support the reduction of mobile Cr(VI) into insoluble forms, the growth of SnO nanoparticles was favored by the co-evaporation of SnO2 with Fe powders at various mass ratios. Characterization techniques indicated that the percentage and the stability of SnO is proportional to the Fe content in the target with a requirement of at least 50% wt to inhibit the formation of a passive SnO2 surface layer. The produced particles were evaluated regarding their efficiency to capture Cr(VI) under conditions similar to water treatment for drinking purposes (pH 7). It was revealed that passivation-free SnO nanoparticles deliver significant improvement in the adsorption capacity corresponding to the residual concentration of 25 μg/L, reaching a value of 1.74 mg/g for the sample prepared with 50% wt Fe in the target. The increase of water acidity was found responsible for the activation of more reduction sites on the particle surface, as reflected through the elevation of efficiency by more than 20% at pH 6., The research project was supported by the Hellenic Foundation for Research and Innovation (H.F.R.I.) under the “second Call for H.F.R.I. Research Projects to support Post-Doctoral Researchers” (Project Number: 00046 MagnoSorb). We thank the CNRS-PROMES laboratory, UPR 8521, belonging to the French National Centre for Scientific Research (CNRS), for providing access to its installations, the support of its scientific and technical staff, and the financial support of the SFERA-III project (Grant Agreement no. 823802). This work was supported by the French “Investments for the future” program managed by the National Agency for Research, under contact ANR-10-EQPX-49-SOCRATE (Equipex SOCRATE). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 101007417 and has benefited from the access provided by CSIC-ICMAB in Barcelona within the framework of the NFFA-Europe Pilot Transnational Access Activity, proposal ID262. C. M. Boubeta thanks the Spanish MCIN/AEI/10.13039/501100011033 programme for the financial support provided through a Torres Quevedo (PTQ2021-012178) fellowship. Ll. Balcells acknowledges the Ministry of Science and Innovation of Spain for the support through the OXISHOT project (PID2021-128410OB-I00)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-to-charge conversion in all-oxide La2/3Sr1/3MnO3/SrIrO3 heterostructures

  • Martin Rio, Sergi
  • Konstantinovic, Zorica
  • Pomar, Alberto
  • Balcells, Lluis
  • Pablo-Navarro, Javier
  • Ibarra, M. Ricardo
  • Magén, César
  • Mestres, Narcís
  • Frontera, Carlos
  • Martínez Perea, Benjamín
Spin injection and spin-charge conversion processes in all-oxide La2/3Sr1/3MnO3/SrIrO3 (LSMO/SIO) heterostructures with different SIO layer thickness and interfacial features have been studied. Ferromagnetic resonance (FMR) technique has been used to generate pure spin currents by spin pumping (SP) in ferromagnetic (FM) half-metallic LSMO. The change of the resonance linewidth in bare LSMO layers and LSMO/SIO heterostructures suggests a successful spin injection into the SIO layers. However, low values of the spin mixing conductance, compared to more traditional permalloy (Py)/Pt or yttrium iron garnet (YIG)/Pt systems, are found. A thorough analysis of the interfaces by high-resolution scanning transmission electron microscopy (HR-STEM) imaging suggests that they are structurally clean and atomic sharp, but a compositional analysis by energy-dispersive X-ray spectroscopy (EDS) reveals the interdiffusion of La, Ir, and Mn atomic species in the first atomic layers close to the interface. Inverse spin Hall effect (ISHE) measurements evidence that interfacial features play a very relevant role in controlling the effectiveness of the spin injection process and low transversal ISHE voltage signals are detected. In addition, it is found that larger voltage signals are detected for the lowest SIO layer thickness highlighting the role of the spin diffusion length (λsd)/SIO layer thickness ratio. The values of ISHE voltage are rather low but allow us to determine the spin Hall angle of SIO (θSH ≈ 1.12% at T = 250 K), which is remarkably similar to that obtained for the well-known Py/Pt system, therefore suggesting that SIO could be a promising spin-Hall material., This work has received funding from the “Spanish ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S), “OXISOT” (PID2021-128410OB-I00), and PID2020-112914RB-I00. This work has also received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 823717-ESTEEM3, and from the Gobierno Regional de Aragón through Project E13_23R., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar-assisted approach for the synthesis of nanoadsorbents for biogas desulfurization using wastes

  • Simeonidis, Konstantinos
  • Martinez Boubeta, Carlos
  • Kellartzis, Ioannis
  • Makridis, Antonios
  • Delli, Evangelia
  • Haeussler, Anita
  • Kougias, Panagiotis G.
  • Vourlias, George
  • Balcells, Lluis
Minimizing food wastes and finding a second life use for industrial residuals have become some of the top priorities of modern society. This work considers the use of spent eggs and mussels shells, as well as marble dust, as raw sources to develop nanoparticles involving renewable resources in both their preparation and adoption in technological applications. Specifically, Ca/Mg-based nanoparticles were obtained by evaporating such wastes in a physical vapor deposition system using concentrated solar beam and explored as high capacity H2S adsorbents for the purification of biogas. The evaluation of their uptake performance in a fixed-bed configuration indicates that the formation of a thick layer of Ca(OH)2 on very small nanoparticles (<70 nm) inhibits H2S uptake, whereas the presence of Mg phases (dolomite) favors its potentiation. Importantly, the co-evaporation of iron provides an extra amplification of the absorption capacity due to the synergy of the Ca/Mg neutralizing character and the affinity of Fe for sulfur. In the best case, the nanoparticles obtained from mussels and 10 %wt. Fe reached an uptake capacity of 0.92 mg/g. This high yield is attributed to the formation of oxides, such as Ca2Fe2O5, that allow a sulfide to sulfate oxidation-adsorption mechanism., We thank the CNRS-PROMES laboratory, UPR 8521, belonging to the French National Center for Scientific Research (CNRS) for providing access to its installations, the support of its scientific and technical staff, and the financial support of the SFERA-III project (Grant Agreement No 823802). This work was supported by the French “Investments for the future” program managed by the National Agency for Research, under contact ANR-10-EQPX-49-SOCRATE (Equipex SOCRATE). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101007417, having benefited from the access provided by CSIC-ICMAB in Barcelona within the framework of the NFFA-Europe Pilot Transnational Access Activity, proposal ID262. C.M. Boubeta is granted financial support through the Torres Quevedo programme (PTQ2021-012178) by the Spanish MCIN/AEI/10.13039/501100011033. Ll. Balcells acknowledges the Ministry of Science and Innovation of Spain for the support through the OXISHOT project (PID2021-128410OB-I00)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Twin's Landscape on the Magnetic Damping of La2/3Sr1/3MnO3 Thin Films

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Frontera, Carlos
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Understanding the origin and mechanisms of magnetic damping in complex oxide materials is crucial for optimizing spin dynamics and tailoring their properties for specific spintronic applications. Ferromagnetic resonance spectroscopy (FMR) technique has been used to investigate the magnetic damping of multiple La2/3Sr1/3MnO3 (LSMO) epitaxial thin films with similar thickness and identical DC magnetic properties. However, the dynamic magnetic properties exhibit noticeable variations among samples. Microstructural analyses using X-ray diffraction (XRD) and atomic force microscopy (AFM), confirm that the samples are structurally identical, except for minute differences in the miscut angles of the substrates. Nevertheless, when examining the samples using backscattered electron (BSE) images in scanning electron microscopy (SEM), significant disparities in the twin distribution are observed. These variations in the twin distribution directly correlate with the observed differences in the damping values. A careful image analysis of BSE images allows to demonstrate that the increase of damping is due to the pinning of the magnetization in the twin boundaries., This work has received fundings from the “Spanish ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S), “OXISOT” (PID2021-128410OB-I00) and PID2020-112914RB-I00, co-financed by the European Regional Development Fund. Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identifying the role of the cationic geometric configuration in spinel catalysts for polysulfide conversion in sodium-sulfur batteries

  • Zhang, Chao Yue
  • Lu, Xuan
  • Han, Xu
  • Yu, Jing
  • Zhang, Chaoqi
  • Huang, Chen
  • Balcells, Lluis
  • Garzón Manjón, Alba
  • Jacas Biendicho, Jordi
  • Li, Junshan
  • Arbiol, Jordi
  • Sun, Gengzhi
  • Zhou, Jin Yuan
  • Cabot, Andreu
An AB2X4 spinel structure, with tetrahedral A and octahedral B sites, is a paradigmatic class of catalysts with several possible geometric configurations and numerous applications, including polysulfide conversion in metal-sulfur batteries. Nonetheless, the influence of the geometric configuration and composition on the mechanisms of catalysis and the precise manner in which spinel catalysts facilitate the conversion of polysulfides remain unknown. To enable controlled exposure of single active configurations, herein, Cotd2+ and Cooh3+ in Co3O4 catalysts for sodium polysulfide conversion are in large part replaced by Fetd2+ and Feoh3+, respectively, generating FeCo2O4 and CoFe2O4. Through an examination of electrochemical activation energies, the characterization of symmetric cells, and theoretical calculations, we determine that Cooh3+ serves as the active site for the breaking of S-S bonds, while Cotd2+ functions as the active site for the formation of S-Na bonds. The current study underlines the subtle relationship between activity and geometric configurations of spinel catalysts, providing unique insights for the rational development of improved catalysts by optimizing their atomic geometric configuration., This work was supported by the Innovation fund for small and medium-sized Enterprises in Gansu Province (No. 22CX3JA006), Lanzhou Talent Innovation and Entrepreneurship Project (No. 2022-2-81), National Natural Science Foundation of China (Grant Nos. 61801200), and partially by the Fundamental Research Funds for the Central Universities (Grant No.: lzujbky-2021-it33). J.S. Li acknowledges financial support from the Natural Science Foundation of Sichuan province (2022NSFSC1229). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. AGM has received funding from Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. L.B. thanks the Ministry of Science and Innovation of Spain through the OXISHOT project (PID2021-128410OB-I00). ICN2 acknowledges funding from Project IU16-014206 (METCAM-FIB) from Generalitat de Catalunya and by “ERDF A way of making Europe”, by the European Union., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Sputtering Processes in Strontium Iridate Thin Films

  • Fuentes, Víctor
  • Balcells, Lluis
  • Konstantinović, Z.
  • Martínez, Benjamín
  • Pomar, Alberto
The growth of epitaxial thin films from the Ruddlesden–Popper series of strontium iridates by magnetron sputtering is analyzed. It was found that, even using a non-stoichiometric target, the films formed under various conditions were consistently of the perovskite-like n = ∞ SrIrO3 phase, with no evidence of other RP series phases. A detailed inspection of the temperature–oxygen phase diagram underscored that kinetics mechanisms prevail over thermodynamics considerations. The analysis of the angular distribution of sputtered iridium and strontium species indicated clearly different spatial distribution patterns. Additionally, significant backsputtering was detected at elevated temperatures. Thus, it is assumed that the interplay between these two kinetic phenomena is at the origin of the preferential nucleation of the SrIrO3 phase. In addition, strategies for controlling cation stoichiometry off-axis have also been explored. Finally, the long-term stability of the films has been demonstrated., This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). Z.K. acknowledges funding provided by the Institute of Physics Belgrade (University of Belgrade, Serbia). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101007417, having benefited from the access provided by ICMAB within the framework of the NFFA-Europe Pilot Transnational Access Activity, proposal ID352., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing
  • Huang, Chen
  • Usoltsev, Oleg
  • Black, Ashley P.
  • Gupta, Kapil
  • Spadaro, Maria Chiara
  • Pinto, Iván
  • Botifoll, Marc
  • Li, Canhuang
  • Herrero Martín, Javier
  • Zhou, Jinyuan
  • Ponrouch, Alexandre
  • Zhao, Ruirui
  • Balcells, Lluis
  • Zhang, Chao Yue
  • Cabot, Andreu
  • Arbiol, Jordi
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of Li2S and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g-1 at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm-2, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells., This study is part of the Advanced Materials program and In-CAEM project, supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. This work is in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICMAB-CSIC members thank the State Investigation Agency and Spanish Ministery of Science, Innovation and Universities through (PID2020-113805GB-I00) and OXISOT (PID2021-128410OB-I00). ICN2 acknowledges funding from grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.(71) This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 and European Union Next Generation EU/PRTR. IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 and ICMAB acknowledge the support from the Severo Ochoa Programme (MINECO, grant no. CEX2021-001214-S and CEX2023-001263-S). A.P. acknowledges the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant no. 715087)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic spin alignment within homologous NiS2/NiSe2 heterostructures to promote sulfur redox kinetics in lithium-sulfur batteries

  • Huang, Chen
  • Yu, Jing
  • Zhang, Chaoyue
  • Cui, Zhibiao
  • Le, Yao-Jie
  • Nan, Bingfei
  • Lu, Xuan
  • He, Ren
  • Gong, Li
  • Li, Junshan
  • Li, Canhuang
  • Xue, Qian
  • Zhou, Jin Yuan
  • Qi, Xueqiang
  • Balcells, Lluis
  • Arbiol, Jordi
  • Cabot, Andreu
The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, General it at de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU / PRTR. C. H., J. Y., C.Y. Z., and B. F. N thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717-ESTEEM3. These In situ XRD and XAS experiments were performed at the Melbourne Synchrotron, Australia. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced oxygen evolution and zinc-air battery performance via electronic spin modulation in heterostructured catalysts

  • Yang, Linlin
  • He, Ren
  • Botifoll, Marc
  • Zhang, Yongcai
  • Ding, Yang
  • Di, Chong
  • He, Chuansheng
  • Xu, Ying
  • Balcells, Lluis
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Cabot, Andreu
Beyond optimizing electronic energy levels, the modulation of the electronic spin configuration is an effective strategy, often overlooked, to boost activity and selectivity in a range of catalytic reactions, including the oxygen evolution reaction (OER). This electronic spin modulation is frequently accomplished using external magnetic fields, which makes it impractical for real applications. Herein, spin modulation is achieved by engineering Ni/MnFe2O4 heterojunctions, whose surface is reconstructed into NiOOH/MnFeOOH during the OER. NiOOH/MnFeOOH shows a high spin state of Ni, which regulates the OH− and O2 adsorption energy and enables spin alignment of oxygen intermediates. As a result, NiOOH/MnFeOOH electrocatalysts provide excellent OER performance with an overpotential of 261 mV at 10 mA cm−2. Besides, rechargeable zinc-air batteries based on Ni/MnFe2O4 show a high open circuit potential of 1.56 V and excellent stability for more than 1000 cycles. This outstanding performance is rationalized using density functional theory calculations, which show that the optimal spin state of both Ni active sites and oxygen intermediates facilitates spin-selected charge transport, optimizes the reaction kinetics, and decreases the energy barrier to the evolution of oxygen. This study provides valuable insight into spin polarization modulation by heterojunctions enabling the design of next-generation OER catalysts with boosted performance., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering (Grant No. 2022-K31) and the Zhejiang Province Key Research and Development Project (2023 C01191). The authors acknowledge funding from Generalitat de Catalunya 2021SGR00457 and 2021SGR01581. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103. ICN2 is a founding member of e-DREAM. L.Y. thanks the China Scholarship Council (CSC) for the scholarship support (202008130132). This work is supported by Spanish Ministry of Science and Innovation through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin conduction and interfacial effects in La2/3Sr1/3MnO3/NiO/Pt heterostructures

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Frontera, Carlos
  • Magén, César
  • Mestres, Narcís
  • Martínez Perea, Benjamín
In this work we report on the generation and transport of pure spin currents in La2/3Sr1/3MnO3(LSMO)/NiO/Pt heterostructures. Pure spin currents, generated by means of spin pumping in the LSMO layer, are transmitted through the NiO layer and detected by measuring the transverse voltage signal generated by the inverse spin Hall effect (ISHE) in the Pt layer. The spin current transmission is studied as a function of the NiO thickness and temperature. NiO layers grown at room temperature are polycrystalline and their microstructural and magnetic features clearly depend on thickness. Scanning transmission electron microscopy techniques revealed that homogeneous conformal coating of the LSMO layer is only achieved for NiO layer thicknesses above about 2 nm. Below this critical thickness the NiO layer is discontinuous and its main role would be to disturb the LSMO/Pt interface causing it to behave as something similar to an insulating barrier. Magnetic measurements indicate that NiO layers are paramagnetic (PM) well below room temperature. In agreement with these observations, the amplitude of the ISHE voltage signal decreases monotonically on lowering temperature and makes evident that there are two spin conduction regimes as a function of the NiO layer thickness with different spin diffusion lengths. For thin discontinuous NiO layers a spin diffusion length of λSDL≈0.8 nm is found, which is slightly larger than typical values found for insulating barriers, but definitely smaller than λSDL≈3.8 nm found for NiO layer thickness above 2 nm. The latter being similar to λSDL previously reported for epitaxial NiO layers. Our findings indicate that inserting a PM NiO insulating layer of optimal thickness improves the spin transparency of the LSMO/Pt interface. Additionally, the results suggest that spin conduction through the NiO layer is likely driven by magnetic correlations and short-range thermal magnons., This work has received funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S) and “OXISOT” (PID2021–128410OB-I00) and “AMONANO” (PID2020–112914RB-I00) and HTSUPERFUN (PID2021–124680OB-I00) funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Implementing magnetically-active Sn-based nanocomposites in hexavalent chromium removal from drinking water

  • Asimakidou, Theopoula
  • Kalaitzidou, Kyriaki
  • Pinakidou, Fani
  • Zhou, Ting
  • Rivera Gil, Pilar
  • Balcells, Lluis
  • Mitrakas, Manassis
  • Makridis, Antonios
  • Katsikini, Maria
  • Vourlias, George
  • Chrissafis, Konstantinos
  • Simeonidis, Konstantinos
A novel nanocomposite consisting of Fe3O4-loaded tin oxyhydroxy-chloride is demonstrated as an efficient adsorbent for the removal of hexavalent chromium in compliance to the new drinking water regulation. This study introduces a continuous-flow production of the nanocomposite through the separate synthesis of (i) 40 nm Fe3O4 nanoparticles and (ii) multilayered spherical arrangements of a tin hydroxy-chloride identified as abhurite, before the application of a wet-blending process. The homogeneous distribution of Fe3O4 nanoparticles on the abhurite's morphology, features nanocomposite with magnetic response whereas the 10 % loaded nanocomposite preserves a Cr(VI) uptake capacity of 7.2 mg/g for residual concentrations below 25 μg/L. Kinetic and thermodynamic examination of the uptake evolution indicates a relative rapid Cr(VI) capture dominated by interparticle diffusion and a spontaneous endothermic process mediated by reduction to Cr(III). The efficiency of the optimized nanocomposite was validated in a pilot unit operating in a sequence of a stirring reactor and a rotary magnetic separator showing an alternative and competitive application path than typical fixed-bed filtration, which is supported by the absence of any acute cellular toxicity according to human kidney cell viability tests., The research project was supported by the Hellenic Foundation for Research and Innovation (H.F.R.I.) under the “2nd Call for H.F.R.I. Research Projects to support Post-Doctoral Researchers” (Project Number: 00046 MagnoSorb). Pilar Rivera-Gil acknowledges the Ministry of Science, Innovation and Universities (MICINN-AEI) (AEI-PID2019–106755RB-I00) and the AGAUR (2021 SGR 00175 and 2021 PROD 00041) for financial support. The study received financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and “OXISOT” (PID2021-128410OB-I00) by MCIN/AEI/10.13039/501100011033 / FEDER, UE., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploiting redox reaction mediated by Fe3O4 nanoparticles to control Cr(VI) presence in drinking water

  • Asimakidou, Theopoula
  • Kalaitzidou, Kyriaki
  • Tsingenopoulou, Z.
  • Martinez Boubeta, Carlos
  • Venegas-Gomez, A.
  • Teran, Francisco José
  • Balcells, Lluis
  • Simeonidis, Konstantinos
Public and authorities concern about the worldwide intensity and the long-term health risks arising by the presence of hexavalent chromium in drinking water resources initiated a combined effort to set new conformance regulations and develop novel and sustainable methods to purify polluted water. This study examines the effect of the chemical environment during the synthesis of Fe3O4 nanoparticles through the oxidative precipitation of Fe2+ salts. In addition to determining the morphological and structural characteristics of nanomaterials as a function of the release of various counterions from the reagents involved in the process, the main objective of this work was to find the optimal conditions that result in maximum adsorption capacity for the elimination of hexavalent chromium species in natural water. Results indicate that replacing FeSO4 by FeCl2 improves efficiency by around 35%, achieving concentrations below the regulatory limit of 25 μg/L and with an adsorption capacity of 2.8 mg/g. This finding was attributed to the formation of smaller nanoparticles (approximately 28 nm), which provided a greater specific surface area. However, the use of Mohr's salt or replacement of the alkalinity controller with KOH inhibits the increase of pH, resulting in large aggregates with low Cr(VI) uptake capacity. Conversely, replacing the oxidizing agent with KNO3, or reducing the ethanol percentage, does not modify the geometry of the particles but interferes the decomposition process of the green rust. Qualified Fe3O4 nanoparticles were used to validate the correlation between Cr(VI) loading and magnetization cycles obtained by AC magnetometry. Preliminary results showed a linear dependence of the dynamical remanence and Cr(VI) capture. Hence, this demonstrates the possibility of establishing novel sensor devices to monitor water quality and evaluate the operational life of the adsorbent., The research project was supported by the Hellenic Foundation for Research and Innovation (H.F.R.I.) under the “2nd Call for H.F.R.I. Research Projects to support Post-Doctoral Researchers” (Project Number: 00046 MagnoSorb). C.M. Boubeta received funding from the Torres Quevedo programme (PTQ2021-012178) by the Spanish MCIN/AEI/https://doi.org/10.13039/501100011033. Alejandro Venegas Gómez thanks the funding from the Spanish Research Agency (SRA) (PRE2021-100202). Severo Ochoa Excellence Grant (CEX2020-001039-S) is acknowledged. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). Authors would like to thank the Materials for Medicine and Biotechnology Group, Instituto de Ciencia de Materiales de Madrid for assistance in the TEM observations., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing
  • Yue Zhang, Chao
  • Cui, Zhibiao
  • He, Ren
  • Yang, Linlin
  • Nan, Bingfei
  • Li, Canhuang
  • Qi, Xuede
  • Qi, Xueqiang
  • Li, Junshan
  • Yuan Zhou, Jin
  • Usoltsev, Oleg
  • Simonelli, Laura
  • Arbiol, Jordi
  • Lei, Yao-Jie
  • Sun, Qing
  • Wang, Guoxiu
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1)., This work was financially supported by the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU/PRTR. C. H., J. Y. thank the China Scholarship Council for the scholarship support. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. XAS experiments were performed at CLAESS beamline of ALBA Synchrotron with the collaboration of ALBA staff. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors acknowledge the support of the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.51, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation of unpaired electrons to promote electron transfer at the cathode of room-temperature sodium sulfur batteries

  • Huang, Chen
  • Yu, Jing
  • Lei, Yao-Jie
  • Usoltsev, Oleg
  • Gong, Li
  • Cui, Zhibiao
  • Li, Junshan
  • Li, Canhuang
  • Nan, Bingfei
  • Lu, Xuan
  • He, Ren
  • Qi, Xuede
  • Xue, Qian
  • Chai, Jiali
  • Ren, Yuchuan
  • Bi, Xiaoyu
  • Cheng, Yapeng
  • Zhou, Jin Yuan
  • Skorynina, Alina
  • Bugaev, Aram
  • Martínez-Alanis, Paulina R.
  • Balcells, Lluis
  • Arbiol, Jordi
  • Zhang, Chao Yue
  • Cabot, Andreu
Room-temperature sodium-sulfur batteries offer significant potential for energy storage, but they are hindered by slow Na-S reaction kinetics. While trial and error screening shows cobalt-based sulfur hosts to effectively activate this reaction, this study aims to enable a more rational catalyst design by exploring how cobalt's electronic configuration within the cathode composite affects its activity and how this configuration can be adjusted through charge injection from neighboring atoms. Cobalt oxide nanoparticles coated with carbon nitride serve as a model system for this purpose, where N atoms in C3N4 donate electrons to Co, generating additional unpaired Co 3d electrons, that are then transferred to sodium polysulfides with a reduced kinetic barrier. Experimental and theoretical analyses reveal that this activated electronic state boosts charge transfer, while the adjusted d-band center improves adsorption energy, lowering the reaction energy barrier for the polysulfide conversion rate-determining step., This work was financially supported by the SyDECat and AMaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 and PID2023-149158OB-C43, respectively), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985 /AEI /10.13039 /501100011033, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and Next Generation EU / PRTR-C17.I1. C. H., J. Y., C.Y. Z., and B. F. N thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, General it at de Catalunya. ICN2 is a founding member of e-DREAM[65]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Doping Activation of Anion-Mediated Electron Transfer in Catalytic Reactions

  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Sun, Guowen
  • Balcells, Lluis
  • Li, Jiayue
  • Qi, Xuede
  • Yi, Cheng Zhu
  • Herrero Martín, Javier
  • Simonelli, Laura
  • Fauth, François
  • He, Ren
  • Pan, Xiaobo
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Cabot, Andreu
Heteroatom-doping has emerged as a transformative approach to producing high-performance catalysts, yet the current trial-and-error approach to optimize these materials remains ineffective. To enable the rational design of more efficient catalysts, models grounded in a deeper understanding of catalytic mechanisms are essential. Existing models, such as d-band center theory, fall short in explaining the role of dopants, particularly when these dopants do not directly interact with reactants. In this study, we synthesize various heteroatom-doped catalysts to explore the correlation between the electronic effects of the dopants and catalyst activity. Using Co-MoS2 as a model catalyst and the Li-S redox reaction within the cathode of Li-S batteries as a test system, we show the interaction between cobalt sites and adjacent lattice sulfur atoms disrupts the intrinsic structural and electronic symmetry of MoS2. This disruption enhances the transfer of spin-polarized electrons from metal centers to lattice sulfur and promotes the adsorption of reactant intermediates. Furthermore, by analyzing 20 different dopant elements, we establish a linear relationship between the electron density in the lattice sulfur and catalyst activity toward the reduction of sulfur species, a relationship that extends to other catalytic systems, such as the hydrogen evolution reaction., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 and European Union Next Generation EU/PRTR. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Authors acknowledge the use of funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and “OXISOT” (PID2021-128410OB-I00). J.L. is grateful for the Natural Science Foundation of Sichuan project (2025ZNSFSC0139)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Chip Planar Metasurfaces for Magnetic Sensors with Greatly Enhanced Sensitivity

  • Barrera, Aleix
  • Fourneau, Emile
  • Bort-Soldevila, Natanael
  • Cunill Subiranas, Jaume
  • Valle, Nuria del
  • Lejeune, Nicolas
  • Staňo, Michal
  • Smekhova, Alevtina
  • Mestres, Narcís
  • Balcells, Lluis
  • Navau, Carles
  • Uhlíř, Vojtěch
  • Bending, Simon J.
  • Valencia, Sergio
  • Silhanek, Alejandro V.
  • Palau, Anna
Metamaterials with engineered structures have been extensively investigated for their capability to manipulate optical, acoustic, or thermal waves. In particular, magnetic metamaterials with precise geometry, shape, size and arrangement of their elemental blocks may be used to concentrate, focus, or guide magnetic fields. In this work, we show the potential of using soft-magnetic permalloy (Py) metasurfaces to tailor the physical properties of other magnetic structures at the local scale. As an illustration, the magnetic response of a Cobalt (Co) sensor bar placed at the core of a Py metasurface is investigated as a function of in-plane magnetic fields through the planar Hall effect. Our findings reveal that by appropriately selecting the metasurface geometrical parameters, we can adjust the Co bar's coercive field and susceptibility, leading to a huge enhancement in sensor sensitivity of over 2 orders of magnitude. Micromagnetic simulations, coupled with magneto-transport equations and X-ray photoemission electron measurements (XPEEM) with contrast from magnetic circular dichroism (XMCD), accurately capture this effect and provide insights into the underlying physical mechanisms. These findings can potentially enhance the performance and versatility of magnetic functional devices by using specifically designed structural magnetic materials., The authors acknowledge financial support from Fonds de la Recherche Scientifique - FNRS under the programs PDR T.0204.21 and CDR J.0176.22, EraNet-CHISTERA R.8003.21. Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033/through CHIST-ERA PCI2021-122028-2A and PCI2021-122083-2A cofinanced by the European Union Next Generation EU/PRTR, PID2021-124680OB-I00, PID2021–128410OB-I00, and TED2021-130402B–I00, cofinanced by ERDF a way of making Europe, and Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S). The Spanish Nanolito networking project (RED2022-134096-T). The Research Foundation and by COST (European Cooperation in Science and Technology) [www.cost.eu] through COST Action SUPERQUMAP (CA 21144). N.L. acknowledges support from FRS-FNRS (Research Fellowships FRIA). The work of E.F. has been financially supported by the FWO and F.R.S.-FNRS under the Excellence of Science (EOS) project O.0028.22. AB acknowledge support from MICIN Predoctoral Fellowship (PRE2019-09781). S.J.B. was supported by the Engineering and Physical Sciences Research Council (EPSRC) in the United Kingdom under Grant No. EP/W022680/1. The authors acknowledge the Scientific Services at ICMAB and the UAB PhD program in Materials Science. M.S. and V.U. acknowledge the support from the TACR EraNet CHIST-ERA project MetaMagIC TH77010001. J.C.-S. acknowledges funding from AGAUR-FI Joan Oró grants (2023 FI-2 00143), Generalitat de Catalunya. We thank the Helmholtz-Zentrum Berlin für Materialien und Energie for the allocation of synchrotron radiation beamtime at the SPEEM end-station of UE49-PGM beamline at BESSY II., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain relief and domain architecture in epitaxial NiO films on La2/3Sr1/3MnO3/SrTiO3 for spin-transport engineering

  • Chen, Shoulong
  • Frontera, Carlos
  • Toda-Casaban, Meritxell
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Magén, César
  • Martínez Perea, Benjamín
  • Mestres, Narcís
The data that support the findings of this study are available from the corresponding author upon reasonable request., This study reports on the epitaxial growth and structural characterization of ultrathin NiO-films deposited by magnetron sputtering on La2/3Sr1/3MnO3 (LSMO) films grown on SrTiO3 (STO) substrates with (001)- and (111)-orientations. X-ray diffraction and atomic-force microscopy show that all NiO layers are single-phase, face-centered pseudo-cubic, atomically smooth, root-main-square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High-resolution reciprocal-space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit-cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration-corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)-oriented samples, the four antiferromagnetic T-domains are oblique to the sample plane, while on the (111) case, one lies in-plane. This in-plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high-performance spintronic devices., This work has received funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S and CEX2023-001286-S) and “OXISOT” (PID2021-128410OB-I00), “AMONANO” (PID2020-112914RB-I00), and HTSUPERFUN (PID2021-124680OB-I00) funded by MCIN/AEI/ 10.13039/ 501100011033, from the Gobierno de Aragon project E13_23R, including FEDER funding, and by “ERDF A way of making Europe,” by the “European Union.” Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). M. Toda-Casaban acknowledges financial support from the “Spanish Ministry of Science, Innovation and Universities” through a FPU scholarship. The authors thank BESSY-II Synchrotron for providing beamtime (exp. num. 242-12902-ST) and Dr. Daniel Többens for his kind assistance during data collection at the KMC-II beamline. The authors acknowledge the contribution from ICMAB-CSIC's Scientific & Technological Services, specially X-Ray Diffraction (Mr. J. Esquius, Ms. A. Crespi, and Mr. X. Campos). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship program., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystallographic engineering of spin transport in antiferromagnetic NiO thin films

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Bozzo, Bernat
  • Frontera, Carlos
  • Magén, César
  • Mestres, Narcís
  • Martínez Perea, Benjamín
In this work, we investigate how the crystallographic growth direction influences spin current transmission in antiferromagnetic (AF) NiO thin films. By manipulating epitaxial growth, we explored the spin transport characteristics in La2/3Sr1/3MnO3/NiO/Pt heterostructures grown on top of (001)- and (111)-oriented SrTiO3 substrates, varying the NiO barrier thickness (tNiO). Spin currents were generated via spin pumping (SP), and detection was done by the inverse spin Hall effect (ISHE). X-ray diffraction and high-resolution electron microscopy techniques confirmed high-quality epitaxial films with nearly atomically sharp interfaces and similar dislocation distributions, irrespective of the growth direction. Nevertheless, epitaxially engineered (111) heterostructures exhibited superior spin transport properties, including lower magnetic damping (α), longer spin diffusion lengths (λSd), and higher spin mixing conductance (g↑↓). The temperature dependence of the ISHE voltage signal (VISHE) also showed orientation-dependent behavior: while (001)-oriented samples followed a monotonic trend, (111)-oriented samples displayed a peak that shifted to higher temperatures with increasing tNiO, associated with the emergence of AF ordering. Moreover, (111)-oriented samples demonstrated notable spin current amplification at room temperature, peaking at tNiO ≈ 1 nm before decaying quasi-exponentially, indicative of spin diffusion-mediated conduction. Although the spin diffusion length in (111)-oriented samples was roughly double that of their (001)-oriented counterparts, it was still too short to be explained by angular momentum transport by mobile antiferromagnons through NiO. Instead, these findings point to a mechanism involving magnetic correlations and short-range thermal magnons. The superior spin transport properties and the enhanced spin conduction in (111)-oriented samples are primarily attributed to a synergistic combination of interfacial and dynamic effects, a more favorable Néel vector alignment and distinct interface symmetry, which can enhance spin-Hall effects or enable different spin textures. Overall, this study underscores the pivotal role of the Néel vector and crystallographic orientation in AF spin transport, providing valuable insights for the design and optimization of spintronic devices., This work has received funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S) and “OXISOT” (PID2021-128410OB-I00) and “AMONANO” (PID2020-112914RB-I00) and HTSUPERFUN (PID2021-124680OB-I00) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. Shoulong Chen acknowledges financial support from the China Scholarship Council (CSC). We acknowledge the contribution from ICMAB-CSIC’s Scientific & Technological Services: X-ray Diffraction (Mr. J. Esquius, Ms. A. Crespi and Mr. X. Campos). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship program., CEX2023-001263-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale structural superlubricity in solution-processed graphene films via tribo-induced transfer layers

  • Vasić, Borislav
  • Milošević, Ivana
  • Konstantinović, Zorica
  • Ognjanović, Miloš
  • Pomar, Alberto
So far, nanoscale superlubricity has been demonstrated in well-ordered van der Waals materials, such as graphite and mechanically exfoliated graphene. In contrast, this study demonstrates nanoscale superlubricity in structurally inhomogeneous systems such as solution-processed graphene films, which are promising for scalable and practical applications. The investigated graphene films were obtained via liquid-phase exfoliation (LPE) and deposited by Langmuir–Blodgett assembly technique at the water–air interface, while frictional measurements were performed using atomic force microscopy (AFM)-based techniques. To enable superlubricity in the system consisting of a silica AFM tip and an LPE graphene film, a tribo-induced, graphene-based conformal coating was first formed around the tip. Unlike previous studies that relied exclusively on pristine graphite, we easily transferred small and weakly adhered graphene flakes onto the AFM tip by rubbing it against the LPE graphene film in contact mode. Subsequent friction measurements were performed using these graphene-coated tips. The measurements on LPE films deposited onto silica and polyethylene terephthalate (PET) substrates revealed ultralow friction coefficients of approximately 0.005 on flat regions composed of large graphene flakes thereby confirming the emergence of the superlubric regime. However, the inherently non-uniform morphology of LPE films, with small flakes and numerous exposed edges, introduces localized high-friction regions and wear-prone sites that prevent superlubricity across extended areas. These findings highlight the importance of achieving large flake sizes with reduced density of exposed edges and improved flake adhesion in order to enable robust structural superlubricity in LPE graphene films., BV, IM, and ZK acknowledge funding provided by the Institute of Physics Belgrade, through the grant of the Ministry of Education, Science, and Technological Development of the Republic of Serbia. AP and ZK acknowledge funding from the State Investigation Agency from “OXISOT” (PID2021-128410OB-I00) and the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023– 001263-S), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin conduction and interfacial effects in La2/3Sr1/3MnO3/NiO/Pt heterostructures

  • Chen, S.
  • Pomar, A.
  • Balcells, Ll.
  • Konstantinovic, Z.
  • Frontera, C.
  • Magén, C.
  • Mestres, N.
  • Martinez, B.
In this work we report on the generation and transport of pure spin currents in La2/3Sr1/3MnO3(LSMO)/NiO/Pt heterostructures. Pure spin currents, generated by means of spin pumping in the LSMO layer, are transmitted through the NiO layer and detected by measuring the transverse voltage signal generated by the inverse spin Hall effect (ISHE) in the Pt layer. The spin current transmission is studied as a function of the NiO thickness and temperature. NiO layers grown at room temperature are polycrystalline and their microstructural and magnetic features clearly depend on thickness. Scanning transmission electron microscopy techniques revealed that homogeneous conformal coating of the LSMO layer is only achieved for NiO layer thicknesses above about 2 nm. Below this critical thickness the NiO layer is discontinuous and its main role would be to disturb the LSMO/Pt interface causing it to behave as something similar to an insulating barrier. Magnetic measurements indicate that NiO layers are paramagnetic (PM) well below room temperature. In agreement with these observations, the amplitude of the ISHE voltage signal decreases monotonically on lowering temperature and makes evident that there are two spin conduction regimes as a function of the NiO layer thickness with different spin diffusion lengths. For thin discontinuous NiO layers a spin diffusion length of λSDL≈0.8 nm is found, which is slightly larger than typical values found for insulating barriers, but definitely smaller than λSDL≈3.8 nm found for NiO layer thickness above 2 nm. The latter being similar to λSDL previously reported for epitaxial NiO layers. Our findings indicate that inserting a PM NiO insulating layer of optimal thickness improves the spin transparency of the LSMO/Pt interface. Additionally, the results suggest that spin conduction through the NiO layer is likely driven by magnetic correlations and short-range thermal magnons.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain Relief and Domain Architecture in Epitaxial NiO Filmson La 2/3 Sr1/3 MnO3 /SrTiO3 for Spin-Transport Engineering

  • Chen, Shoulong
  • Frontera, Carlos
  • Toda-Casaban, Meritxell
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Magén, César
  • Martínez, Benjamín
  • Mestres, Narcís
This study reports on the epitaxial growth and structural characterization of ultrathin NiO‐films deposited by magnetron sputtering on La2/3Sr1/3MnO3 (LSMO) films grown on SrTiO3 (STO) substrates with (001)‐ and (111)‐orientations. X‐ray diffraction and atomic‐force microscopy show that all NiO layers are single‐phase, face‐centered pseudo‐cubic, atomically smooth, root‐main‐square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High‐resolution reciprocal‐space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit‐cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration‐corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)‐oriented samples, the four antiferromagnetic T‐domains are oblique to the sample plane, while on the (111) case, one lies in‐plane. This in‐plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high‐performance spintronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Crystallographic Engineering of Spin Transport in Antiferromagnetic NiO Thin Films

  • Chen, Shoulong
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Bozzo, Bernat
  • Frontera, Carlos
  • Magen, César
  • Mestres, Narcis
  • Martínez, Benjamin
In this work, we investigate how the crystallographic growth direction influences spin current transmission in antiferromagnetic (AF) NiO thin films. By manipulating epitaxial growth, we explored the spin transport characteristics in La2/3Sr1/3MnO3/NiO/Pt heterostructures grown on top of (001)- and (111)-oriented SrTiO3 substrates, varying the NiO barrier thickness (tNiO). Spin currents were generated via spin pumping (SP), and detection was done by the inverse spin Hall effect (ISHE). X-ray diffraction and high-resolution electron microscopy techniques confirmed high-quality epitaxial films with nearly atomically sharp interfaces and similar dislocation distributions, irrespective of the growth direction. Nevertheless, epitaxially engineered (111) heterostructures exhibited superior spin transport properties, including lower magnetic damping (α), longer spin diffusion lengths (λSd), and higher spin mixing conductance (g↑↓). The temperature dependence of the ISHE voltage signal (VISHE) also showed orientation-dependent behavior: while (001)-oriented samples followed a monotonic trend, (111)-oriented samples displayed a peak that shifted to higher temperatures with increasing tNiO, associated with the emergence of AF ordering. Moreover, (111)-oriented samples demonstrated notable spin current amplification at room temperature, peaking at tNiO ≈ 1 nm before decaying quasi-exponentially, indicative of spin diffusion-mediated conduction. Although the spin diffusion length in (111)-oriented samples was roughly double that of their (001)-oriented counterparts, it was still too short to be explained by angular momentum transport by mobile antiferromagnons through NiO. Instead, these findings point to a mechanism involving magnetic correlations and short-range thermal magnons. The superior spin transport properties and the enhanced spin conduction in (111)-oriented samples are primarily attributed to a synergistic combination of interfacial and dynamic effects, a more favorable Néel vector alignment and distinct interface symmetry, which can enhance spin-Hall effects or enable different spin textures. Overall, this study underscores the pivotal role of the Néel vector and crystallographic orientation in AF spin transport, providing valuable insights for the design and optimization of spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Artificial Graphene Spin Polarized Electrode for Magnetic Tunnel Junctions

  • Zatko, Victor|||0000-0002-2475-8866
  • Galceran, Regina|||0000-0002-2080-2575
  • Galbiati, Marta
  • Peiro, Julian
  • Godel, Florian|||0000-0003-1741-2741
  • Kern, Lisa-Marie|||0000-0001-9781-9132
  • Perconte, David
  • Ibrahim, Fatima
  • Hallal, Ali
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Frontera, Carlos|||0000-0002-0091-4756
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Kidambi, Piran R.|||0000-0003-1546-5014
  • Robertson, John
  • Hofmann, Stephan|||0000-0001-6375-1459
  • Collin, Sophie
  • Petroff, Frédéric
  • Martin, Marie-Blandine
  • Dlubak, Bruno|||0000-0001-5696-8991
  • Seneor, Pierre
2D materials offer the ability to expose their electronic structure to manipulations by a proximity effect. This could be harnessed to craft properties of 2D interfaces and van der Waals heterostructures in devices and quantum materials. We explore the possibility to create an artificial spin polarized electrode from graphene through proximity interaction with a ferromagnetic insulator to be used in a magnetic tunnel junction (MTJ). Ferromagnetic insulator/graphene artificial electrodes were fabricated and integrated in MTJs based on spin analyzers. Evidence of the emergence of spin polarization in proximitized graphene layers was observed through the occurrence of tunnel magnetoresistance. We deduced a spin dependent splitting of graphene's Dirac band structure (∼15 meV) induced by the proximity effect, potentially leading to full spin polarization and opening the way to gating. The extracted spin signals illustrate the potential of 2D quantum materials based on proximity effects to craft spintronics functionalities, from vertical MTJs memory cells to logic circuits.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Oxygen Evolution and Zinc-Air Battery Performance via Electronic Spin Modulation in Heterostructured Catalysts

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Botifoll, Marc|||0000-0002-4876-6393
  • Zhang, Yongcai|||0000-0003-1551-754X
  • Ding, Yang
  • Di, Chong
  • He, Chuansheng
  • Xu, Ying
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Beyond optimizing electronic energy levels, the modulation of the electronic spin configuration is an effective strategy, often overlooked, to boost activity and selectivity in a range of catalytic reactions, including the oxygen evolution reaction (OER). This electronic spin modulation is frequently accomplished using external magnetic fields, which makes it impractical for real applications. Herein, spin modulation is achieved by engineering Ni/MnFeO heterojunctions, whose surface is reconstructed into NiOOH/MnFeOOH during the OER. NiOOH/MnFeOOH shows a high spin state of Ni, which regulates the OH and O adsorption energy and enables spin alignment of oxygen intermediates. As a result, NiOOH/MnFeOOH electrocatalysts provide excellent OER performance with an overpotential of 261 mV at 10 mA cm. Besides, rechargeable zinc-air batteries based on Ni/MnFeO show a high open circuit potential of 1.56 V and excellent stability for more than 1000 cycles. This outstanding performance is rationalized using density functional theory calculations, which show that the optimal spin state of both Ni active sites and oxygen intermediates facilitates spin-selected charge transport, optimizes the reaction kinetics, and decreases the energy barrier to the evolution of oxygen. This study provides valuable insight into spin polarization modulation by heterojunctions enabling the design of next-generation OER catalysts with boosted performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • Chen, Jiakun
  • Lai, Wei-Hong
  • Lei, Yao-Jie
  • Nan, Bingfei|||0000-0002-7128-6056
  • Lu, Xuan|||0000-0003-2453-2805
  • He, Ren|||0000-0003-3712-5539
  • Gong, Li
  • Li, Junshan|||0000-0002-1482-1972
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Xue, Qian
  • Zhou, Jin Yuan
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS/NiSe heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS/NiSe@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS/NiSe heterostructure promotes the spin splitting of the 3d orbital, driving the Ni transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS/NiSe@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻ at 0.1C), excellent rate capability (572 mAh·g⁻ at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻), high initial capacities of 1173 mAh·g⁻ (7.27 mAh·cm⁻) are measured at 0.1C, and 1058 mAh·g⁻ is retained after 300 cycles.