Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFeCoO Thin Films

  • Machado, Pamela|||0000-0002-4235-0370
  • Sallés Perramon, Pol|||0000-0003-1426-611X
  • Frebel, Alexander
  • De Luca, Gabriele|||0000-0003-3757-3761
  • Ros, Eloi|||0000-0002-1952-6614
  • Hagendorf, Christian
  • Fina, Ignasi|||0000-0003-4182-6194
  • Puigdollers, Joaquim|||0000-0002-1834-2565
  • Coll, Mariona|||0000-0001-5157-7764
Photoferroelectric BiFeO (BFO) has attracted renewed interest to be integrated into thin film photovoltaic (PV) devices as a stable, lead-free, and versatile photoabsorber with simplified architecture. While significant efforts have been dedicated toward the exploration of strategies to tailor the properties of this photoabsorber to improve the device performance, efficiencies still remain low. The modification of the BFO interface by the incorporation of transport-selective layers can offer fresh opportunities to modify the properties of the device. Identifying an optical and electrically suitable selective layer while ensuring easy device processing and controlled film properties is challenging. In this work, we determine the influence of incorporating a ZnO layer on the ferroelectric and photoresponse behavior of an epitaxial BiFeCoO (BFCO)-based heterostructure. The device is completed with Sn-doped InO (ITO) and LaSrMnO (LSMO) electrodes. This all-oxide system is stable under ambient conditions and displays robust ferroelectricity. The coupled ferroelectricity-photoresponse measurements demonstrate that the short circuit current can be modulated by ferroelectric polarization in up to 68% under blue monochromatic light. Also, the responsivity of the system with the ZnO-modified interface is larger than that of the system with no ZnO. Complementary band energy alignment studies reveal that the observed increase in the short circuit current density of the device with ZnO is attributed to lower Fermi level energy at the ZnO/BFCO interface compared to the ITO/BFCO interface, which reduces charge recombination. Therefore, this study provides useful insights into the role of the ZnO interface layer in stable BFO-based devices to further explore their viability for potential optoelectronic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On-chip planar metasurfaces for magnetic sensors with greatly enhanced sensitivity

  • Barrera Català, Aleix|||0000-0002-7146-0026
  • Fourneau, Emile
  • Bort-Soldevila, Natanael|||0000-0001-9765-1843
  • Cunill-Subiranas, Jaume|||0000-0002-5612-2846
  • Valle, Nuria del|||0000-0003-2608-5009
  • Lejeune, Nicolas|||0000-0001-6003-1472
  • Staňo, Michal|||0000-0002-7440-7191
  • Smekhova, Alevtina|||0000-0003-0946-2909
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Navau, Carles|||0000-0003-4763-5305
  • Uhlíř, Vojtěch|||0000-0002-0512-6329
  • Bending, Simon|||0000-0002-4474-2554
  • Valencia, Sergio|||0000-0002-3912-5797
  • Silhanek, Alejandro|||0000-0001-9551-5717
  • Palau, Anna|||0000-0002-2217-164X
Metamaterials with engineered structures have been extensively investigated for their capability to manipulate optical, acoustic, or thermal waves. In particular, magnetic metamaterials with precise geometry, shape, size and arrangement of their elemental blocks may be used to concentrate, focus, or guide magnetic fields. In this work, we show the potential of using soft-magnetic permalloy (Py) metasurfaces to tailor the physical properties of other magnetic structures at the local scale. As an illustration, the magnetic response of a Cobalt (Co) sensor bar placed at the core of a Py metasurface is investigated as a function of in-plane magnetic fields through the planar Hall effect. Our findings reveal that by appropriately selecting the metasurface geometrical parameters, we can adjust the Co bar's coercive field and susceptibility, leading to a huge enhancement in sensor sensitivity of over 2 orders of magnitude. Micromagnetic simulations, coupled with magneto-transport equations and X-ray photoemission electron measurements (XPEEM) with contrast from magnetic circular dichroism (XMCD), accurately capture this effect and provide insights into the underlying physical mechanisms. These findings can potentially enhance the performance and versatility of magnetic functional devices by using specifically designed structural magnetic materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Field-Induced Phase Transitions in Cuprate Superconductors for Cryogenic in-Memory Computing

  • Günkel, Thomas
  • Alcalà, Jordi|||0000-0001-5440-9061
  • Fernandez, Alejandro
  • Barrera Català, Aleix|||0000-0002-7146-0026
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
  • Palau, Anna|||0000-0002-2217-164X
Energy-efficient cryogenic memory systems play a critical role in a wide spectrum of applications focused on ultra-energy-efficient information and communication technologies, such as quantum computing or superconducting electronics. Neuromorphic systems, known for their superior energy efficiency, have emerged as a promising approach for in-memory computing. Specifically, strongly correlated oxides that exhibit Mott metal-insulator transitions through field-induced oxygen movement are of great interest for analog memory and neuromorphic computing. Yet, optimizing their performance at low temperatures may prove challenging due to their reliance on ionic motion. In this study, superconducting structures composed of strongly correlated YBa2Cu3O7 - x (YBCO) combined with ferromagnetic (LSMO) are investigated to obtain non-volatile multilevel memristive switching effects with high performance at cryogenic temperatures. This research reveals the presence of two competing switching mechanisms, which are attributed to the movement of oxygen vacancies and electric carriers within these structures. It is determined that a phase transition induced by the movement of holes is the primary factor influencing the switching dynamics at low temperatures. Additionally, a physics-based compact model is proposed that accurately replicates the experimental findings and provides a tool for circuit-level design.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Synthesis of La0.75Sr0.25CrO3 Thin Films for p-Type Transparent Conducting Electrodes

  • Machado, Pamela
  • Guzmán, Roger
  • Morera, Ramon J.
  • Alcalà, Jordi
  • Palau, Anna
  • Zhou, Wu
  • Coll, Mariona
The imperative need for highly performant and stable p-type transparent electrodes based on abundant metals is stimulating the research on perovskite oxide thin films. Moreover, exploring the preparation of these materials with the use of cost-efficient and scalable solution-based techniques is a promising approach to extract their full potential. Herein, we present the design of a chemical route, based on metal nitrate precursors, for the preparation of pure phase La0.75Sr0.25CrO3 (LSCO) thin films to be used as a p-type transparent conductive electrode. Different solution chemistries have been evaluated to ultimately obtain dense, epitaxial, and almost relaxed LSCO films. Optical characterization of the optimized LSCO films reveals promising high transparency with ∼67% transmittance while room temperature resistivity values are 1.4 Ω·cm. It is suggested that the presence of structural defects, i.e., antiphase boundaries and misfit dislocations, affects the electrical behavior of LSCO films. Monochromated electron energy loss spectroscopy allowed changes in the electronic structure in LSCO films to be determined, revealing the creation of Cr4+ and unoccupied states at the O 2p upon Sr-doping. This work offers a new venue to prepare and further investigate cost-effective functional perovskite oxides with potential to be used as p-type transparent conducting electrodes and be easily integrated in many oxide heterostructures., This work was funded by MICIN/AEI/10.13039/501100011033/FEDER through the projects Severo Ochoa FUNFUTURE CEX2019-00917-S, FREEOXIDES PID2020-114224RB-I00, MAGNETOLIGHT TED2021-130402B-I00, and HTSUPERFUN PID2021-124680OB-I00. We also acknowledge the financial support from the 2020 Leonardo Grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project, the National Key R&D Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). P.M. is grateful for financial support from the FPI fellowship (PRE2018-084618). The work of P.M. and J.A. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Role of the Sr3−xCaxAl2O6 Sacrificial Layer Composition in Epitaxial La0.7Sr0.3MnO3 Membranes

  • Sallés, Pol
  • Guzman, Roger
  • Barrera, Aleix
  • Ramis, Martí
  • Caicedo, José Manuel
  • Palau, Anna
  • Zhou, Wu
  • Coll, Mariona
The possibility to fabricate freestanding single crystal complex oxide films has raised enormous interest to be integrated in next-generation electronic devices envisaging distinct and novel properties that can deliver unprecedented performance improvement compared to traditional semiconductors. The use of the water-soluble Sr3Al2O6 (SAO) sacrificial layer to detach the complex oxide film from the growth substrate has significantly expanded the complex oxide perovskite membranes library. Nonetheless, the extreme water sensitivity of SAO hinders its manipulation in ambient conditions and restricts the deposition approaches to those using high vacuum. This study presents a pioneering study on the role of Ca-substitution in solution processed SAO (Sr3−xCaxAl2O6 with x ⩽ 3) identifying a noticeable improvement on surface film crystallinity preserving a smooth surface morphology while favoring the manipulation in a less-restricted ambient conditions. Then, the study focuses on the effect of the sacrificial composition on the subsequent ex situ deposition of La0.7Sr0.3MnO3 (LSMO) by pulsed laser deposition, to obtain epitaxial films with a variable degree of strain. Finally, epitaxial and strain-free LSMO membranes with metal-insulator transition at 290 K are delivered. This study offers a hybrid and versatile approach to prepare and easily manipulate crystalline perovskite oxide membranes by facilitating ex situ growth on SAO-based sacrificial layer., This work was funded by MICIN/AEI/10.13039/ 501100011033/FEDER through the projects Severo Ochoa FUNFUTURE CEX2019-00917-S, CEX2021-001214-S and PID2020-114224RBI00, TED2021-130402B-I00. The authors also acknowledge the financial support from the 2020 Leonardo Grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project, the National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). The project that gave rise to these results received the support of a fellowship (P.S.) from “la Caixa” Foundation (ID 100010434). The fellowship code was LCF/BQ/DI19/11730026. M.R. acknowledges the support from FPI fellowship PRE2021-099672. The authors are thankful to the Thin film scientific service at ICMAB and to Dr. J. Santiso from ICN2 for the fruitful discussions on structure properties. This work had been done in the framework of the doctorate in material science of the Autonomous University of Barcelona (P.S. and M.R.)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unfolding the Challenges To Prepare Single Crystalline Complex Oxide Membranes by Solution Processing

  • Sallés, Pol
  • Guzmán, Roger
  • Tan, Huan
  • Ramis, Martí
  • Fina, Ignasi
  • Machado, Pamela
  • Sánchez Barrera, Florencio
  • Luca, Gabriele de
  • Zhou, Wu
  • Coll, Mariona
The ability to prepare single crystalline complex oxide freestanding membranes has opened a new playground to access new phases and functionalities not available when they are epitaxially bound to the substrates. The water-soluble Sr3Al2O6 (SAO) sacrificial layer approach has proven to be one of the most promising pathways to prepare a wide variety of single crystalline complex oxide membranes, typically by high vacuum deposition techniques. Here, we present solution processing, also named chemical solution deposition (CSD), as a cost-effective alternative deposition technique to prepare freestanding membranes identifying the main processing challenges and how to overcome them. In particular, we compare three different strategies based on interface and cation engineering to prepare CSD (00l)-oriented BiFeO3 (BFO) membranes. First, BFO is deposited directly on SAO but forms a nanocomposite of Sr-Al-O rich nanoparticles embedded in an epitaxial BFO matrix because the Sr-O bonds react with the solvents of the BFO precursor solution. Second, the incorporation of a pulsed laser deposited La0.7Sr0.3MnO3 (LSMO) buffer layer on SAO prior to the BFO deposition prevents the massive interface reaction and subsequent formation of a nanocomposite but migration of cations from the upper layers to SAO occurs, making the sacrificial layer insoluble in water and withholding the membrane release. Finally, in the third scenario, a combination of LSMO with a more robust sacrificial layer composition, SrCa2Al2O6 (SC2AO), offers an ideal building block to obtain (001)-oriented BFO/LSMO bilayer membranes with a high-quality interface that can be successfully transferred to both flexible and rigid host substrates. Ferroelectric fingerprints are identified in the BFO film prior and after membrane release. These results show the feasibility to use CSD as alternative deposition technique to prepare single crystalline complex oxide membranes widening the range of available phases and functionalities for next-generation electronic devices., This work was funded by CEX2023-001263-S/MCIN/AEI/10.13039/501100011033, PID2020-114224RB-I00/AEI/10.13039/501100011033, PID2019-107727RB-I00/AEI/10.13039/501100011033, TED2021-130402B–I00, and TED2021-130453B c21/MCIN/AEI/10.13039/501100011033 European Union “NextGenerationEU”/“PRTR”. We also acknowledge the financial support from the National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). This research benefited from resources and supports from the Electron Microscopy Center at the University of Chinese Academy of Sciences. The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434) LCF/BQ/DI19/11730026. P.M. acknowledges the FPI fellowship (PRE2018-084618 MCIN/AEI/10.13039/5011000011033). The authors are grateful to I. Caño for the assistance in thin film preparation and to the Thin Film Deposition Scientific Service at ICMAB-CSIC. G.D.L. acknowledges grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. This work has been done in the framework of the doctorate in material science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFe0.9Co0.1O3 Thin Films

  • Machado, Pamela
  • Salles, Pol
  • Frebel, Alexander
  • Luca, Gabriele de
  • Ros, Eloi
  • Hagendorf, Christian
  • Fina, Ignasi
  • Puigdollers, Joaquim
  • Coll, Mariona
Photoferroelectric BiFeO3 (BFO) has attracted renewed interest to be integrated into thin film photovoltaic (PV) devices as a stable, lead-free, and versatile photoabsorber with simplified architecture. While significant efforts have been dedicated toward the exploration of strategies to tailor the properties of this photoabsorber to improve the device performance, efficiencies still remain low. The modification of the BFO interface by the incorporation of transport-selective layers can offer fresh opportunities to modify the properties of the device. Identifying an optical and electrically suitable selective layer while ensuring easy device processing and controlled film properties is challenging. In this work, we determine the influence of incorporating a ZnO layer on the ferroelectric and photoresponse behavior of an epitaxial BiFe0.9Co0.1O3 (BFCO)-based heterostructure. The device is completed with Sn-doped In2O3 (ITO) and La0.7Sr0.3MnO3 (LSMO) electrodes. This all-oxide system is stable under ambient conditions and displays robust ferroelectricity. The coupled ferroelectricity-photoresponse measurements demonstrate that the short circuit current can be modulated by ferroelectric polarization in up to 68% under blue monochromatic light. Also, the responsivity of the system with the ZnO-modified interface is larger than that of the system with no ZnO. Complementary band energy alignment studies reveal that the observed increase in the short circuit current density of the device with ZnO is attributed to lower Fermi level energy at the ZnO/BFCO interface compared to the ITO/BFCO interface, which reduces charge recombination. Therefore, this study provides useful insights into the role of the ZnO interface layer in stable BFO-based devices to further explore their viability for potential optoelectronic applications., This work was funded by CEX2023-001263-S/AEI/10.13039/501100011033, PID2020-535 114224RB-I00/AEI/10.13039/501100011033, PID2019-536 107727RB-I00/AEI/10.13039/501100011033. The authors also acknowledge projects TED2021-130402B-I00 and TED2021-130453B-C21 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. The authors acknowledge Prof. Josep Fontcuberta for fruitful scientific discussions on the photoferroelectric behavior of BFCO heterostructures and Prof. Andreas Klein for his advice on XPS data acquisition and energy band alignment interpretation. Dr. G. Sauthier is also acknowledged for the support in the XPS measurements. P.M. and P.S. acknowledge financial support from the FPI fellowship (PRE2018-084618) and from the “la Caixa” Foundation LCF/BQ/DI19/11730026 fellowship. The work of P.M. and P.S. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. G.D.L. acknowledges funding from the Swiss National Science Foundation (SNSF) under Project No. P2EZP2-191865 and grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. G.D.L also acknowledges Prof. G. Catalan for the use of the off-axis sputtering system., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Chip Planar Metasurfaces for Magnetic Sensors with Greatly Enhanced Sensitivity

  • Barrera, Aleix
  • Fourneau, Emile
  • Bort-Soldevila, Natanael
  • Cunill Subiranas, Jaume
  • Valle, Nuria del
  • Lejeune, Nicolas
  • Staňo, Michal
  • Smekhova, Alevtina
  • Mestres, Narcís
  • Balcells, Lluis
  • Navau, Carles
  • Uhlíř, Vojtěch
  • Bending, Simon J.
  • Valencia, Sergio
  • Silhanek, Alejandro V.
  • Palau, Anna
Metamaterials with engineered structures have been extensively investigated for their capability to manipulate optical, acoustic, or thermal waves. In particular, magnetic metamaterials with precise geometry, shape, size and arrangement of their elemental blocks may be used to concentrate, focus, or guide magnetic fields. In this work, we show the potential of using soft-magnetic permalloy (Py) metasurfaces to tailor the physical properties of other magnetic structures at the local scale. As an illustration, the magnetic response of a Cobalt (Co) sensor bar placed at the core of a Py metasurface is investigated as a function of in-plane magnetic fields through the planar Hall effect. Our findings reveal that by appropriately selecting the metasurface geometrical parameters, we can adjust the Co bar's coercive field and susceptibility, leading to a huge enhancement in sensor sensitivity of over 2 orders of magnitude. Micromagnetic simulations, coupled with magneto-transport equations and X-ray photoemission electron measurements (XPEEM) with contrast from magnetic circular dichroism (XMCD), accurately capture this effect and provide insights into the underlying physical mechanisms. These findings can potentially enhance the performance and versatility of magnetic functional devices by using specifically designed structural magnetic materials., The authors acknowledge financial support from Fonds de la Recherche Scientifique - FNRS under the programs PDR T.0204.21 and CDR J.0176.22, EraNet-CHISTERA R.8003.21. Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033/through CHIST-ERA PCI2021-122028-2A and PCI2021-122083-2A cofinanced by the European Union Next Generation EU/PRTR, PID2021-124680OB-I00, PID2021–128410OB-I00, and TED2021-130402B–I00, cofinanced by ERDF a way of making Europe, and Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023–001263-S). The Spanish Nanolito networking project (RED2022-134096-T). The Research Foundation and by COST (European Cooperation in Science and Technology) [www.cost.eu] through COST Action SUPERQUMAP (CA 21144). N.L. acknowledges support from FRS-FNRS (Research Fellowships FRIA). The work of E.F. has been financially supported by the FWO and F.R.S.-FNRS under the Excellence of Science (EOS) project O.0028.22. AB acknowledge support from MICIN Predoctoral Fellowship (PRE2019-09781). S.J.B. was supported by the Engineering and Physical Sciences Research Council (EPSRC) in the United Kingdom under Grant No. EP/W022680/1. The authors acknowledge the Scientific Services at ICMAB and the UAB PhD program in Materials Science. M.S. and V.U. acknowledge the support from the TACR EraNet CHIST-ERA project MetaMagIC TH77010001. J.C.-S. acknowledges funding from AGAUR-FI Joan Oró grants (2023 FI-2 00143), Generalitat de Catalunya. We thank the Helmholtz-Zentrum Berlin für Materialien und Energie for the allocation of synchrotron radiation beamtime at the SPEEM end-station of UE49-PGM beamline at BESSY II., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Field-Induced Phase Transitions in Cuprate Superconductors for Cryogenic in-Memory Computing

  • Günkel, Thomas
  • Alcalà, Jordi
  • Fernández, Alejandro
  • Barrera, Aleix
  • Balcells, Lluís
  • Mestres, Narcís
  • Miranda, Enrique
  • Suñé, Jordi
  • Palau, Anna
Energy-efficient cryogenic memory systems play a critical role in a wide spectrum of applications focused on ultra-energy-efficient information and communication technologies, such as quantum computing or superconducting electronics. Neuromorphic systems, known for their superior energy efficiency, have emerged as a promising approach for in-memory computing. Specifically, strongly correlated oxides that exhibit Mott metal-insulator transitions through field-induced oxygen movement are of great interest for analog memory and neuromorphic computing. Yet, optimizing their performance at low temperatures may prove challenging due to their reliance on ionic motion. In this study, superconducting structures composed of strongly correlated YBa2Cu3O7 - x (YBCO) combined with ferromagnetic La0.7Sr0.3MnO3$\rm {La_{0.7}Sr_{0.3}MnO_3}$ (LSMO) are investigated to obtain non-volatile multilevel memristive switching effects with high performance at cryogenic temperatures. This research reveals the presence of two competing switching mechanisms, which are attributed to the movement of oxygen vacancies and electric carriers within these structures. It is determined that a phase transition induced by the movement of holes is the primary factor influencing the switching dynamics at low temperatures. Additionally, a physics-based compact model is proposed that accurately replicates the experimental findings and provides a tool for circuit-level design., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation MCIN/ AEI /10.13039/501100011033/ through CHIST-ERA PCI2021-122028-2A and PCI2021-122083-2A co-financed by the European Union Next Generation EU/PRTR, the “Severo Ochoa” Programme for Centres of Excellence CEX2023-001263-S, HTSUPERFUN PID2021-124680OB-I00, and TED2021-130402B-I00, co-financed by ERDF A way of making Europe. The Spanish Nanolito networking project (RED2022-134096-T). The European COST Action SUPERQUMAP (CA 21144). TG acknowledge support from AGAUR Catalan Government Predoctoral Fellowship (2022 FISDU 00115) and AB from MICIN Predoctoral Fellowship (PRE2019-09781). The authors acknowledge the Scientific Services at ICMAB and the UAB PhD program in Materials Science. J.S. and E.M. acknowledge funding from the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN)/Agencia Española de Investigación (AEI)/10.13039/501100011033 under Project PID2022-139586NBC41., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the Role of the Sr3-xCaxAl2O6 Sacrificial Layer Composition in Epitaxial La0.7Sr0.3MnO3 Membranes

  • Sallés Perramon, Pol|||0000-0003-1426-611X
  • Guzmán Aluja, Roger|||0000-0002-5580-0043
  • Barrera Català, Aleix|||0000-0002-7146-0026
  • Ramis, Martí
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Palau, Anna|||0000-0002-2217-164X
  • Zhou, Wu|||0000-0002-6803-1095
  • Coll, Mariona|||0000-0001-5157-7764
The possibility to fabricate freestanding single crystal complex oxide films has raised enormous interest to be integrated in next-generation electronic devices envisaging distinct and novel properties that can deliver unprecedented performance improvement compared to traditional semiconductors. The use of the water-soluble SrAlO (SAO) sacrificial layer to detach the complex oxide film from the growth substrate has significantly expanded the complex oxide perovskite membranes library. Nonetheless, the extreme water sensitivity of SAO hinders its manipulation in ambient conditions and restricts the deposition approaches to those using high vacuum. This study presents a pioneering study on the role of Ca-substitution in solution processed SAO (SrCaAlO with x ⩽ 3) identifying a noticeable improvement on surface film crystallinity preserving a smooth surface morphology while favoring the manipulation in a less-restricted ambient conditions. Then, the study focuses on the effect of the sacrificial composition on the subsequent ex situ deposition of LaSrMnO (LSMO) by pulsed laser deposition, to obtain epitaxial films with a variable degree of strain. Finally, epitaxial and strain-free LSMO membranes with metal-insulator transition at 290 K are delivered. This study offers a hybrid and versatile approach to prepare and easily manipulate crystalline perovskite oxide membranes by facilitating ex situ growth on SAO-based sacrificial layer.