Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Lu, Xuan|||0000-0003-2453-2805
  • Liang, Zhifu
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium–sulfur batteries

  • Yang, Dawei
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Han, Hu
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao
  • Li, Junshan
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
To commercially realize the enormous potential of lithium–sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li+ diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. D. Yang, C. Zhang, and X. Han thank the China Scholarship Council for the scholarship support. Z. Liang acknowledges funding from a MINECO SO FPI PhD grant (SEV-2013-0295-17-1). J. Li obtained an International Postdoctoral Exchange Fellowship (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activating the lattice oxygen oxidation mechanism in amorphous molybdenum cobalt oxide nanosheets for water oxidation

  • Wang, Xiang
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Han, Xu
  • Zuo, Yong
  • Li, Junshan
  • Cabot, Andreu
The cost-effective deployment of several key energy technologies, such as water electrolysis, CO2 electroreduction and metal-air batteries, relies on the design and engineering of cost-effective catalysts able to accelerate the sluggish kinetics of the oxygen evolution reaction (OER). Herein, we detail the synthesis, processing and performance of a cobalt oxide-based OER electrocatalyst with optimized composition, atomic arrangement and nano/microstructure. We demonstrate that doping the cobalt oxide with a higher electronegativity element such as molybdenum promotes the participation of lattice oxygen in the OER. Besides, the processing of the catalyst at moderate temperatures results in an amorphous material with extended compositional and atomic arrangement versatility. Additionally, the catalyst, which is produced through an ion etching assisted strategy using ZIF-67 as a template, displays a highly porous structure in the form of amorphous ultrathin MoCoxOy nanosheets that maximize interaction with the media and facilitate the transport of ions through the electrolyte. After optimizing the molybdenum concentration and structural parameters, the best MoCoxOy catalysts exhibited a low overpotential of 282 mV at 10 mA cm-2 with a reduced Tafel slope of 60.6 mV dec-1, and excellent stability with more than 60 h operation without significant activity decay., This work was supported by the European Regional Development Funds and by the Spanish MINECO through the projects ENE2016-77798-C4-3-R, and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/. X. W., C. X., X. H. and R. D. thank the China Scholarship Council (CSC) for the scholarship support. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Z. L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin
  • He, Ren
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting
  • Zuo, Yong
  • Lu, Xuan
  • Liang, Zhifu
  • Li, Junshan
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Qi, Xueqiang
  • Cabot, Andreu
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm2. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm2. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581, 2021 SGR 00457 and the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. The project on which these results are based has received funding from the European Union's Horizon 2020 Research and Innovation Program under Marie Skłodowska-Curie Grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. This study is part of the Advanced Materials Programme and is supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience PhD Program. L. L.Yang, X. Wang and X. Lu thank the China Scholarship Council (CSC) for the scholarship support. Z. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. Li is grateful for the Natural Science Foundation of Sichuan Project (2022NSFSC1229)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, PengYi|||0000-0002-2306-095X
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhao, Shuangliang
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Wu, Hao Bin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at - 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel π-d conjugated cobalt tetraaza[14]annulene based atomically dispersed electrocatalyst for efficient CO2 reduction

  • Liang, Zhifu
  • Zhang, Ting|||0000-0002-0317-9662
  • Cao, Pengfei
  • Yoshida, Takefumi
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Yamashita, Masahiro
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Tetraaza[14]annulenes (TAA) are synthetic macrocycles which are analogue to porphyrins. However, there are almost no reports about the synthesis of polymers based on TAA and neither on their use as electrocatalysts. The study of new catalysts to promote an efficient electrochemical conversion of carbon dioxide to valuable chemicals is a promising approach to relieve the pressure of carbon emissions and realize the carbon cycle. Herein, we first report the synthesis of a novel tetraaza[14]annulene (TAA) based organic polymeric metal complex (PMC) by a non-template method. This PMC is used as ligand to construct a π-d conjugated cobalt coordination polymer (Poly-TAA-Co) with CoN structure which is supported on multi-wall carbon nanotubes (CNTs) to work as an atomically dispersed efficient electrocatalyst for the CO reduction reaction (CORR). The resulting catalyst (Poly-TAA-Co-CNT) exhibits excellent performance, with a 90% CO faradaic efficiency, a low overpotential (390 mV) and good stability in 0.5 M KHCO aqueous solution. Density functional theory calculations confirmed that the cobalt tetra[14]annulene is an excellent active site for electrocatalytic CORR. This work not only inspires the design of novel TAA based macromolecules, but also paves the way to the development and application of new molecular-based catalysts for electrocatalytic CORR.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to tune the ligand environment of atomically dispersed nickel for efficient alcohol electrochemical oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Zhongjun
  • Tang, PengYi|||0000-0002-2306-095X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zheng, Renji
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl, CHCOO, NO , SO ) on the surface of an amorphous ZnCoNiO catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCoNiO-SO catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm with a small Tafel slope of 41.6 mV dec. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO , can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Temperature-controlled switchable photochromism in solid materials

  • Julià López, Àlex|||0000-0002-3357-8349
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Roscini, Claudio|||0000-0002-0157-8934
A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A High conductivity 1D π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries, A High conductivity one-dimensional π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Tang, Mingxue|||0000-0002-7282-4100
  • Li, Qizhen
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Xu, Ming
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium-sulfur batteries (LSBs). Herein, a 1D π-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species. Ni-MOF-1D also acts as an effective catalyst for S reduction during the discharge process and LiS oxidation during the charging process. In addition, the delocalization of electrons in the π-d system of Ni-MOF-1D provides a superior electrical conductivity to improve electron transfer. Thus, cathodes based on Ni-MOF-1D enable LSBs with excellent performance, for example, impressive cycling stability with over 82% capacity retention over 1000 cycles at 3 C, superior rate performance of 575 mAh g at 8 C, and a high areal capacity of 6.63 mAh cm under raised sulfur loading of 6.7 mg cm. The strategies and advantages here demonstrated can be extended to a broader range of π-d conjugated MOFs materials, which the authors believe have a high potential as sulfur hosts in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium-sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei|||0000-0002-3842-8286
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Yi
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • David, Jérémy|||0000-0003-3219-149X
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Lithium-sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, CN, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X-ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/CN catalyst. As a result, Fe/CN-based cathodes demonstrate significantly improved rate performance and long-term cycling stability. Fe/CN-based cathodes display initial capacities up to 1540 mAh g at 0.1 C and 678.7 mAh g at 5 C, while retaining 496.5 mAh g after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm, they deliver remarkable specific capacity retention of 587 mAh g after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high-performance cathodes based on atomically dispersed catalysts for LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cobalt molybdenum nitride-based nanosheets for seawater splitting

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Xing, Congcong|||0000-0001-7674-6720
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The development of cost-effective bifunctional catalysts for water electrolysis is both a crucial necessity and an exciting scientific challenge. Herein, a simple approach based on a metal-organic framework sacrificial template to preparing cobalt molybdenum nitride supported on nitrogen-doped carbon nanosheets is reported. The porous structure of produced composite enables fast reaction kinetics, enhanced stability, and high corrosion resistance in critical seawater conditions. The cobalt molybdenum nitride-based electrocatalyst is tested toward both oxygen evolution reaction and hydrogen evolution reaction half-reactions using the seawater electrolyte, providing excellent performances that are rationalized using density functional theory. Subsequently, the nitride composite is tested as a bifunctional catalyst for the overall splitting of KOH-treated seawater from the Mediterranean Sea. The assembled system requires overpotentials of just 1.70 V to achieve a current density of 100 mA cm-2 in 1 M KOH seawater and continuously works for over 62 h. This work demonstrates the potential of transition-metal nitrides for seawater splitting and represents a step forward toward the cost-effective implementation of this technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

NbSe2 meets C2N, a 2D-2D heterostructure catalysts as multifunctional polysulfide mediator in ultra-long-life lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Botifoll, Marc|||0000-0002-4876-6393
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Chen, Qiulin
  • Li, Mengyao|||0000-0002-9082-7938
  • Ramon, Alberto
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium-sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li-S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the "adsorption-diffusion-conversion" of polysulfides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Han, Xu|||0000-0001-8319-8830
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao|||0000-0002-9082-7938
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
To commercially realize the enormous potential of lithium-sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability.