Pasar al contenido principal

TECNOLOGIAS ENERGETICAS DEL HIDROGENO IMPULSADAS POR INGENIERIA DE INTERFAZ DE CATALIZADORES AMORFOS/CRISTALINOS

PID2021-124572OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 55
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Controllable Synthesis of Defective TiO2 Nanorods for Efficient Hydrogen Production

  • Xing, Congcong|||0000-0001-7674-6720
  • Yang, Linlin|||0009-0006-9953-5698
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Zhang, Yu|||0000-0002-0332-0013
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Tianqi|||0000-0002-0672-9965
  • Fan, Xiaolei|||0000-0002-9039-6736
  • Fernández-García, Marcos|||0000-0002-9987-0289
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nanorods (NRs), with their high atomic surface exposure within a crystalline architecture, facilitate effective diffusion/transport of charge, rendering them particularly suitable for applications requiring both interaction with the media and charge transfer. In this study, we present a straightforward approach to produce brookite-phase titanium dioxide (TiO) NRs with tunable defects and narrow size distributions by utilizing methylamine hydrochloride and 1,2-hexadecanediol as shape-directing agents. The presence of the Ti defect was confirmed by electron paramagnetic resonance and X-ray photoelectron spectroscopy, and its effect on the photocatalytic properties of TiO, with and without Pt loading, show that the longest TiO NRs provide the highest photocatalytic and photoelectrochemical hydrogen production activity. Transient photocurrent response analysis, electrochemical impedance spectroscopy, and Mott-Schottky analysis plots indicate that an increase in temperature significantly reduces the interface barrier and lowers the transport resistance, leading to a 104% improvement in hydrogen production rates from 25 to 60 °C for the longest TiO NRs. This study underscores the critical role of the TiO nanorod dimensions (18-45 nm) in elevating the hydrogen production efficiency. At 25 °C, rates surged from 1.6 to 2.6 mmol g h, and at 60 °C, rates soared from 3.3 to 5.3 mmol g h, demonstrating the substantial impact of TiO NRs on enhancing hydrogen generation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced lithium polysulfide adsorption and reaction with cobalt-doped spinel additives for robust lithium-sulfur batteries

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Qi, Xuede|||0009-0008-5723-3629
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Chang, Xingqi|||0000-0002-2604-0233
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guardia, Pablo|||0000-0001-9076-4642
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur-based cathodes offer a promising high-energy-density alternative to conventional lithium-ion batteries. However, their commercial viability is hindered by limited stability due to the gradual loss of active sulfur during cycling. This study addresses this challenge by introducing a cobalt-doped spinel oxide as a catalytic additive, designed to enhance the performance and stability of sulfur cathodes with minimized cobalt usage. Small amounts of cobalt doping improve the adsorption of sulfur species through stronger electronic interactions with antibonding orbitals and accelerate charge transfer, thereby promoting more efficient sulfur redox reactions. Cobalt also lowers the energy barrier for LiS formation, a critical step in the cycling process. Specifically, Co-doped MnFeO with 2.4 wt % Co demonstrates a remarkable initial capacity of 1302 mAh/g at 0.1C, excellent rate capability with 700 mAh/g at 4C, and stable cycling performance with an average capacity decay of just 0.03 % per cycle at 0.5C over 200 cycles. Overall, this work underscores the potential of cobalt-doped spinel structures as catalytic additives to mitigate the limitations of sulfur cathodes, paving the way for more stable and high-performance lithium-sulfur batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2Nanoheterostructures with Enhanced OER Performance

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Lu, Xuan|||0000-0003-2453-2805
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Xue, Qian
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Llorca, Jordi|||0000-0002-7447-9582
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Guardia, Pablo|||0000-0001-9076-4642
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We report a colloidal synthesis strategy for producing MnO@Ni(OH)nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnO@Ni(OH)heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnO@Ni(OH)achieves a low overpotential of 299 mV at 10 mA cm, a Tafel slope of 61 mV dec, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)nanosheets, which facilitate *OOH intermediate formation, and the MnOcomponent, known for its intrinsic catalytic activity. Additionally, MnOserves as a stabilizing phase and precursor to MnO, contributing to the overall durability and structural integrity of the catalyst.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Xue, Qian
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Salutari, Francesco|||0000-0002-5802-8941
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Andreu, Teresa|||0000-0002-2804-4545
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Güell, Frank|||0000-0002-6528-9007
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH) pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH supply to the catalyst surface for Ni(OH) reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C-C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni species.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan
  • Xue, Qian
  • Han, Xu
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Zuo, Yong
  • Du, Ruifeng
  • Balcells, Lluis
  • Arbiol, Jordi
  • Llorca, Jordi
  • Qi, Xueqiang
  • Cabot, Andreu
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies., The authors thank the support from the projects Combenergy (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. The authors also thank the Spanish Ministry of Science and Innovation through the Severo Ochoa (CEX2019-000917-S) and OXISOT (PID2021- 128410OB-I00) projects. X.W., X.H., C.X., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT Ph.D. grant (SEV-2013-0295-17-1). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia program. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience Ph.D. program and Universitat Autònoma de Barcelona Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren
  • Yang, Linlin
  • Zhang, Yu
  • Wang, Xiang
  • Lee, Seung-Ho
  • Zhang, Ting
  • Li, Lingxiao
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan
  • Ostovari Moghaddam, Ahmad
  • Llorca, Jordi
  • Ibáñez, María
  • Arbiol, Jordi
  • Xu, Ying
  • Cabot, Andreu
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc–air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm2, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO2. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm2, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm2 and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm2., The authors thank the support from the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience PhD program. This research was supported by the Scientific Service Units (SSU) of IST Austria through resources provided by Electron Microscopy Facility (EMF). S. Lee. and M. Ibáñez acknowledge funding by IST Austria and the Werner Siemens Foundation. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2017 SGR 128. L. L.Yang thanks the China Scholarship Council (CSC) for the scholarship support (202008130132). Z. F. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. W. Chen and Y. Xu thank the support from The Key Research and Development Program of Hebei Province (No. 20314305D) and the cooperative scientific research project of the “Chunhui Program” of the Ministry of Education (2018-7). This work was supported by the Natural Science Foundation of Sichuan province (NSFSC) and funded by the Science and Technology Department of Sichuan Province (2022NSFSC1229)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong
  • Guardia, Pablo
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Zheng, Renji
  • Cabot, Andreu
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl-, CH3COO-, NO3-, SO42-) on the surface of an amorphous ZnCoxNiyOz catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCo1.25Ni0.73Ox-SO4 catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm−2 with a small Tafel slope of 41.6 mV dec−1. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO42−, can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER., The authors thank the support from the projects Combenergy PID2019-105490RB-C32 from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the European Union. X. W., X. H. and R. D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme /Generalitat de Catalunya. Z. L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). Li is grateful for project No. 22NSFSC0966 provided by the Science & Technology Department of Sichuan Province. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia Program., This work was supported by Natural Science Foundation of Sichuan Province (2022NSFSC1229)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Brookite TiO2 nanorods as promising electrochromic and energy storage materials for smart windows

  • Xing, Congcong
  • Yang, Linlin
  • He, Ren
  • Spadaro, Maria Chiara
  • Zhang, Yu
  • Arbiol, Jordi
  • Li, Junshan
  • Poudel, Bed
  • Nozariasbmarz, Amin
  • Li, Wenjie
  • Lim, Khak Ho
  • Liu, Yu
  • Llorca, Jordi
  • Cabot, Andreu
Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO2 ) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO2 NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO2 NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm2 C-1 at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li+ ion intercalation., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through projects PID2021-124572OB-C31 and COMBENERGY (PID2019-105490RB-C32). The authors acknowledge funding from Generalitat de Catalunya 2021SGR00457, 2021SGR01061, and 2021SGR01581. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. J.L. is grateful for the Natural Science Foundation of Sichuan project (2022NSFSC1229). L.Y. thanks the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facet-engineered TiO2 drives photocatalytic activity and stability of supported noble metal clusters during H2 evolution

  • Chen, Yufen
  • Soler, Lluís
  • Cazorla, Claudio
  • Oliveras, Jana
  • Bastús, Neus G.
  • Puntes, Víctor F.
  • Llorca, Jordi
Metal clusters supported on TiO2 are widely used in many photocatalytic applications, including pollution control and production of solar fuels. Besides high photoactivity, stability during the photoreaction is another essential quality of high-performance photocatalysts, however systematic studies on this attribute are absent for metal clusters supported on TiO2. Here we have studied, both experimentally and with first-principles simulation methods, the stability of Pt, Pd and Au clusters prepared by ball milling on nanoshaped anatase nanoparticles preferentially exposing {001} (plates) and {101} (bipyramids) facets during the photogeneration of hydrogen. It is found that Pt/TiO2 exhibits superior stability than Pd/TiO2 and Au/TiO2, and that {001} facet-based photocatalysts always are more stable than their {101} analogous regardless of the considered metal species. The loss of stability associated with cluster sintering, which is facilitated by the transfer of photoexcited carriers from the metal species to the neighbouring Ti and O atoms, most significantly and detrimentally affects the H2-evolution photoactivity., This work was supported by projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. Y.C. (CSC No. 201806920042) acknowledges the China Scholarship Council for Ph.D. scholarship support. L.S. and C.C. are grateful to MICINN Ramon y Cajal program for individual fellowship grant agreements RYC2019-026704-I and RYC2018-024947-I, respectively. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program. N.G.B. and V.P. acknowledge financial support from RTI2018-099965-B-I00, AEI/FEDER,UE and 2017-SGR-1431. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic effect of surface oxygen vacancies and hydroxyl groups on Cu-doped TiO2 photocatalyst for hydrogen evolution

  • Xing, Congcong
  • Zhang, Zhaofu
  • Zhang, Yu
  • Han, Xu
  • Yang, Linlin
  • Li, Junshan
  • Wang, Xiang
  • Martínez-Alanis, Paulina R.
  • Demir, Muslum
  • Piveteau, Laura
  • Florian, Pierre
  • Arbiol, Jordi
  • Guo, Yuzheng
  • Llorca, Jordi
  • Cabot, Andreu
The intricate nature of the titanium dioxide (TiO2) photocatalytic system, influenced by Cu doping, often yields conflicting outcomes. This study addresses this complexity by examining the impact of Cu ion doping in nanostructured TiO2 to augment its photocatalytic efficacy in hydrogen generation from ethanol-water mixtures. The improved performance is primarily attributed to the generation of oxygen vacancies (Ovac) within the TiO2 lattice. By adjusting the thermal processing parameters, the chemical state of Cu is modulated to optimize photocatalytic performance. Solid-state nuclear magnetic resonance (SSNMR) and density functional theory (DFT) calculations confirm that the presence of Ovac and hydroxyl groups (OH−) surface species not only facilitates local spatial charge separation but also enhances light absorption, thereby improving photocatalytic hydrogen evolution reaction (HER) rate up to 20.2 mmol h−1 g−1 under UV light. Furthermore, a proposed mechanism involves the participation of Ovac and OH− species, supported by Mott-Schottky (M − S) plots and ultraviolet photoelectron spectroscopy (UPS), revealing that Cu–TiO2 exhibits a lower flat band potential (Efb) and smaller work function compared to TiO2. This research underscores the pivotal role of Cu ions and Ovac:OH− in advancing the photocatalytic activity of TiO2-based crystals, imparting noteworthy implications for sustainable hydrogen generation., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through projects PID2021-124572OB-C31 and COMBENERGY (PID2019-105490RB-C32). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and Generalitat de Catalunya. This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors thank support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Li is grateful for the Natural Science Foundation of Sichuan project (2022NSFSC1229). X. W. thank the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental Control of a Methanol Catalytic Membrane Reformer †

  • Cifuentes López, Alejandro
  • Serra-Prat, María
  • Torres, Ricardo
  • Llorca, Jordi
A simple proportional integral (PI) controller with scheduled gain has been developed and implemented in a catalytic membrane reactor (CMR) to obtain pure hydrogen from a methanol steam reforming process. The controller is designed to track the setpoint of the pure hydrogen flow rate in the permeate side of the CMR via the manipulation of the fuel inlet flow rate. Therefore, the controller actuator is the liquid pump that provides the mixture of methanol and water to the reactor. Within the CMR, the catalytic pellets of PdZn/ZnAl2O4/Al2O3 have been used to facilitate the methanol steam-reforming reaction under stoichiometric conditions (S/C = 1), and Pd–Ag metallic membranes have been employed to simultaneously separate the generated hydrogen. The PI controller design is based on a mathematical model constructed using transfer functions acquired from dynamic experiments conducted with the CMR. The controller has been successfully implemented, and experimental validation tests have been carried out at 450 °C and relative pressures of 6, 8, 10, and 12 bar., This research has been funded by projects MICINN/FEDER PID2021-124572OB-C31, PID2021-126001OB-C31 and GC 2021 SGR 01061., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering of thermoelectric composites based on silver selenide in aqueous solution and ambient temperature

  • Nan, Bingfei
  • Li, Mengyao
  • Zhang, Yu
  • Xiao, Ke
  • Lim, Khak Ho
  • Chang, Cheng
  • Han, Xu
  • Zuo, Yong
  • Li, Junshas
  • Arbiol, Jordi
  • Llorca, Jordi
  • Ibáñez, María
  • Cabot, Andreu
In Press., The direct, solid state, and reversible conversion between heat and electricity using thermoelectric devices finds numerous potential uses, especially around room temperature. However, the relatively high material processing cost limits their real applications. Silver selenide (Ag2Se) is one of the very few n-type thermoelectric (TE) materials for room-temperature applications. Herein, we report a room temperature, fast, and aqueous-phase synthesis approach to produce Ag2Se, which can be extended to other metal chalcogenides. These materials reach TE figures of merit (zT) of up to 0.76 at 380 K. To improve these values, bismuth sulfide (Bi2S3) particles also prepared in an aqueous solution are incorporated into the Ag2Se matrix. In this way, a series of Ag2Se/Bi2S3 composites with Bi2S3 wt % of 0.5, 1.0, and 1.5 are prepared by solution blending and hot-press sintering. The presence of Bi2S3 significantly improves the Seebeck coefficient and power factor while at the same time decreasing the thermal conductivity with no apparent drop in electrical conductivity. Thus, a maximum zT value of 0.96 is achieved in the composites with 1.0 wt % Bi2S3 at 370 K. Furthermore, a high average zT value (zTave) of 0.93 in the 300–390 K range is demonstrated., Open Access is funded by the Austrian Science Fund (FWF)., B.N., M.L., Y.Z., K.X., and X.H. thank the China Scholarship Council (CSC) for the scholarship support. C.C. received funding from the FWF “Lise Meitner Fellowship” grant agreement M 2889-N. M.I. acknowledges the financial support from ISTA and the Werner Siemens Foundation. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457 and project NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/. ICN2 was supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and was funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and 2021 SGR 01061. K.H.L. acknowledges support from the National Natural Science Foundation of China (22208293). This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controllable Synthesis of Defective TiO2 Nanorods for Efficient Hydrogen Production

  • Xing, Congcong
  • Yang, Linlin
  • Spadaro, Maria Chiara
  • Zhang, Yu
  • Guardia, Pablo
  • Arbiol, Jordi
  • Liu, Tianqi
  • Fan, Xiaolei
  • Fernández García, Marcos
  • Llorca, Jordi
  • Cabot, Andreu
Nanorods (NRs), with their high atomic surface exposure within a crystalline architecture, facilitate effective diffusion/transport of charge, rendering them particularly suitable for applications requiring both interaction with the media and charge transfer. In this study, we present a straightforward approach to produce brookite-phase titanium dioxide (TiO2) NRs with tunable defects and narrow size distributions by utilizing methylamine hydrochloride and 1,2-hexadecanediol as shape-directing agents. The presence of the Ti3+ defect was confirmed by electron paramagnetic resonance and X-ray photoelectron spectroscopy, and its effect on the photocatalytic properties of TiO2, with and without Pt loading, show that the longest TiO2 NRs provide the highest photocatalytic and photoelectrochemical hydrogen production activity. Transient photocurrent response analysis, electrochemical impedance spectroscopy, and Mott-Schottky analysis plots indicate that an increase in temperature significantly reduces the interface barrier and lowers the transport resistance, leading to a 104% improvement in hydrogen production rates from 25 to 60 °C for the longest TiO2 NRs. This study underscores the critical role of the TiO2 nanorod dimensions (18-45 nm) in elevating the hydrogen production efficiency. At 25 °C, rates surged from 1.6 to 2.6 mmol g-1 h-1, and at 60 °C, rates soared from 3.3 to 5.3 mmol g-1 h-1, demonstrating the substantial impact of TiO2 NRs on enhancing hydrogen generation., This work was supported by the European Regional Develop-ment Funds and by the Spanish Ministerio de Economía yCompetitividad through projects PID2021-124572OB-C31and COMBENERGY (PID2019-105490RB-C32). ICN2acknowledges funding from Generalitat de Catalunya2021SGR00457. This study was supported by MCIN withfunding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. This research is part ofthe CSIC program for the Spanish Recovery, Transformationand Resilience Plan funded by the Recovery and ResilienceFacility of the European Union, established by the Regulation(EU) 2020/2094. The authors thank support from the projectNANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way ofmaking Europe”, by the “European Union”. ICN2 is supportedby the Severo Ochoa program from Spanish MCIN/AEI(Grant No. CEX2021-001214-S) and is funded by the CERCAProgramme/Generalitat de Catalunya. P.G. acknowledgesfinancial support from the Spanish government (MICIU)through the Ramon y Cajal research program (RyC2019-028414-I). L.L.Y. thank the China Scholarship Council forscholarship support. This project was also supported by thespecial innovation project fund from the Institute of Wenzhou,Zhejiang University (No. XMGL-KJZX-202204). C.C.X. thanks financial support from the start-up funding ofZJU-WZ (XM202400002) and Wenzhou Research Project(G20240041), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria
  • Serrano, Isabel
  • Garcia, Xènia
  • Garzón Manjón, Alba
  • Hu, Xinxin
  • Arbiol, Jordi
  • Pascua-Solé, Laia
  • Prat, Jordi
  • Villalobos-Portillo, Edgar Eduardo
  • Marini, Carlo
  • Escudero, Carlos
  • Llorca, Jordi
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors., This work was funded by MICINN/FEDER PID2021-124572OB-C31 and PID2021-124572OB-C33 and 2021 SGR 01061 projects. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Program/Generalitat de Catalunya. A.G.M. is grateful to Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of electronic and structural properties on Au/In2O3/ZrO2 catalysts for CO2 hydrogenation to methanol

  • Augusto, Thiago de M
  • Roger, Rubén Blay
  • Petrolini, Davi D
  • Ferreira, Breno F
  • Santos, João Batista O
  • Ramirez, Carlos O
  • Clet, Guillaume
  • Ivanova, Svetlana
  • Odriozola, José Antonio
  • Bobadilla, Luis F.
  • Llorca, Jordi
  • Bueno, José Maria C
Hydrogenation of CO2 to methanol using H2 is a promising route for renewable energy production and CO2 utilization. Meanwhile, the development of catalysts that are both active and highly selective towards methanol production remains a significant challenge. This work investigates the methanol production performance of In2O3, In2O3/ZrO2, ZrO2, and the corresponding Au-promoted oxides. Techniques including XPS, ex situ and operando Raman spectroscopy, in situ and operando DRIFTS, and UV–Vis spectroscopy, together with HR-TEM, revealed that the interactions among Au, InOx, and zirconia species led to the creation of an interface for CO2 activation and hydrogenation to methanol, facilitated by oxygen vacancies generated in a reducing atmosphere. The high dispersion of Au and indium oxide species, as shown by HR-TEM, indicated that Au clusters and/or nanoparticles (NPs), together with In2O3, favored H2 dissociation and the prevention of sintering during the reaction. The 0.22Au/6.6In2O3/ZrO2sample achieved the maximum methanol yield, with superior activity and selectivity, compared to the unpromoted catalyst., This research received funding support from FAPESP (grant numbers 2016/02128-2, 2018/01258-5, 2019/12501-0, and 2023/18451-0) and CNPq (grant numbers 309373/2014-0, 203316/2020-7, 407878/2022-0, and 383428/2023-8). Additional support was provided by CAPES (Finance Code 001) and Fundación Carolina/Grupo de Tordesillas. The authors are grateful for the analytical support of LNNano (acknowledging Carlos Ospina Ramírez), LCE/UFSCar, and Iago William Zapelini for the in situ Raman analysis. J. Llorca is a Serra Húnter Fellow and acknowledges the ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. J.A. Odriozola, R. Blay-Roger, and L.F. Bobadilla acknowledge financial support from the Spanish Ministry of Science through the projects NICER- BIOFUELS (ref. PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref. PID2021-126876OB-I00). The authors are also grateful to Priscilla Jussiane Zambiazi for developing the graphical and schematic., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Atom Catalysts with Unsaturated Co–N2 Active Sites Based on a C2N 2D-Organic Framework for Efficient Sulfur Redox Reaction

  • Yang, Dawei
  • Wang, Jiaao
  • Lou, Chenjie
  • Li, Mengyao
  • Zhang, Chaoqi
  • Ramón, Alberto
  • Li, Canhuang
  • Tang, Mingxue
  • Henkelman, Graeme
  • Xu, Ming
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Mitlin, David
  • Zhou, Guangmin
  • Cabot, Andreu
The lithium-sulfur battery (LSB) is a viable option for the next generation of energy storage systems. However, the shuttle effect of lithium polysulfides (LiPS) and the poor electrical conductivity of sulfur and lithium sulfides limit its deployment. Here, we report on a 2D-organic framework, C2N, with a high loading of low-coordination cobalt single atoms (Co-SAs/C2N) as an effective sulfur host in LSB cathodes. Experimental and computational results reveal that unsaturated Co-N2 active sites with an asymmetric electron distribution act as effective polysulfide traps, accommodating electrons from polysulfide ions to form strong Sx2--Co-N bonds. Additionally, charge transfer between LiPS and unsaturated Co-N2 active sites endows immobilized LiPS with low free energy and low electrochemical decomposition energy barriers, thus accelerating the kinetic conversion of LiPS. As a result, S@Co-SAs/C2N-based cathodes exhibit superior rate performance, impressive cycling stability, and good areal capacity at high sulfur loading, 2-fold that of commercial lithium-ion batteries. This work emphasizes the potential capabilities and promising prospects of single-atom catalysts with unsaturated coordination in LSBs., This work was supported by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union” through the projects ENE2016-77798-C4-3-R and PID2020-116093RB-C43. D. Yang thanks the China Scholarship Council for the scholarship support and the funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). M. Tang and M. Xu thank the financial support by the National Natural Science Foundation of China (Grants 21974007, U1930401, and 22102007). ICN2 acknowledges the support from the Severo Ochoa Programme from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. IREC and ICN2 are both funded by the CERCA Programme/Generalitat de Catalunya. This work was supported by Fundamental Research Funds for the Central Universities (buctrc202112). J. Llorca is a Serra Húnter Fellow and is grateful to projects PID2021-124572OB-C31 and GC2021 SGR 01061 and to ICREA Academia program. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717-ESTEEM3. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors are thankful for the support of the BSRF (Beijing Synchrotron Radiation Facility) during the XAFS measurements at the beamline 1W1B, 4B7A, 4B7B, 4B9B, and Shanghai Synchrotron Radiation Facility (SSRF)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced lithium polysulfide adsorption and reaction with cobalt-doped spinel additives for robust lithium-sulfur batteries

  • Chacón-Borrero, Jesús
  • Qi, Xuede
  • Zhang, Xuesong
  • Berlanga, Armando
  • Chang, Xingqi
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Llorca, Jordi
  • Guardia, Pablo
  • Qi, Xueqiang
  • Zhang, Chao Yue
  • Cabot, Andreu
Sulfur-based cathodes offer a promising high-energy-density alternative to conventional lithium-ion batteries. However, their commercial viability is hindered by limited stability due to the gradual loss of active sulfur during cycling. This study addresses this challenge by introducing a cobalt-doped spinel oxide as a catalytic additive, designed to enhance the performance and stability of sulfur cathodes with minimized cobalt usage. Small amounts of cobalt doping improve the adsorption of sulfur species through stronger electronic interactions with antibonding orbitals and accelerate charge transfer, thereby promoting more efficient sulfur redox reactions. Cobalt also lowers the energy barrier for Li2S formation, a critical step in the cycling process. Specifically, Co-doped MnFe2O4 with 2.4 wt % Co demonstrates a remarkable initial capacity of 1302 mAh/g at 0.1C, excellent rate capability with 700 mAh/g at 4C, and stable cycling performance with an average capacity decay of just 0.03 % per cycle at 0.5C over 200 cycles. Overall, this work underscores the potential of cobalt-doped spinel structures as catalytic additives to mitigate the limitations of sulfur cathodes, paving the way for more stable and high-performance lithium-sulfur batteries., This work was supported by the project SyDEC at (PID2022-136883OB-C22), financed by the Spanish MCIN/AEI, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365, 2024A1515011670), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), the Foundation of the National Research Council of Thailand (N42A650253), and the NSRF via the Program Management Unit for Human Resources & Institutional Development, Research and Innovation (B50G670108). Thanks to the China Scholarship Council (CSC) for the scholarship support. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Program / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is a founding member of e-DREAM [60]. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and funding from GC 2021 SGR 01061 and projects MICIN/AEI/FEDER PID2021–124572OB-C31 and MCIN/AEI CEX2023–001300-M. C.Y. Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt-zirconia coated monoliths fabricated by direct ink writing for catalytic applications

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Llanes, Luis
  • Llorca, Jordi
  • Morales, Miguel
Direct Ink Writing (DIW) is a promising technique for fabricating ceramic catalysts with complex geometries and enhanced catalytic performances, but these still require overcoming some challenges to maximize their catalytic and mechanical functionality. In this work, DIW yttria-doped zirconia (YDZ) catalysts were coated with a Co/YDZ catalyst layer. Two configurations based on a dense monolith and a porous one sintered at 1450ºC and 1300ºC were fabricated through DIW, using optimal rheological hydrogel-inks, to investigate the effect of porosity on the mechanical and catalytic performance in the ethanol steam reforming reaction. The monolith sintered at 1450°C achieved the best mechanical and catalytic performance, as it presented the highest Co concentration (2.3 at%) at the catalyst layer. In addition, this monolith exhibited excellent mechanical properties at the interface between contiguous filaments in the multilayer structure. Therefore, this simple approach is a promising method to produce enhanced catalytically and mechanically robust monoliths., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2021–126614OB-I00, PID2021–124572OB-C31, PID2022–137274NB-C32, PID2022–137626OB-C31, and CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant number 2021 SGR 01053 and 01061, and from T02–20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). J.Ll. is Serra Hunter Fellow and is grateful to ICREA Academia program (Generalitat de Catalunya). M.M. is Serra Hunter Fellow. Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged. The authors also thank Casimir Casas, Oscar Escuer and Marc Torrente for their assistance during this research., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Ink Writing of cobalt-zirconia monoliths for catalytic applications: A novel single-step fabrication approach

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Vilella, Tània
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Additive manufacturing technologies are revolutionizing the fabrication of ceramic catalysts through hierarchical design to enhance catalytic performance and simultaneously improving the efficiency of the manufacturing process by decreasing the initial investment and production steps. This work proposes a fabrication process of cobalt-zirconia monoliths based on Direct-Ink Writing of Co-enriched hydrogel-based ceramic inks, and the debinding and sintering at 600ºC in a single thermal treatment. The effect of Co precursor amount (3.0 −7.0 wt% Co) on the rheological properties of inks and the catalytic performance in ethanol steam reforming is investigated. The results reveal the successful incorporation of Co into rectilinear monoliths with 50 % infill, obtaining strongly Co-rich surfaces. The remarkable catalytic performance of the 5.0 wt% Co monolith at 300–600ºC confirms the feasibility of this novel single-step approach, reaching an appropriate balance between catalytic activity and printability. This outcome may represent a push towards the fabrication of fully 3D-printed monolithic catalysts., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2021–124572OB-C31, PID2021–125150OB-I00, PID2021–126614OB-I00, PID2022–137274NB-C32, and PID2022–137626OB-C31 funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This work was part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant numbers 2021 SGR 01053 and 01061, and 2017 SGR 1165, and from T02–20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). T.V. acknowledges the Ph.D. scholarship received from the Barcelona Research Center in Multiscale Science and Engineering of the UPC. M.M and J.Ll. are Serra Hunter Fellows and J.Ll. and M.P.G. are grateful to ICREA Academia Program (Generalitat de Catalunya). Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly selective CO formation via CO2 hydrogenation over novel ceria-based high-entropy oxides (HEOs)

  • Cortazar, Maria
  • Lafuente, Marta
  • Navarro-Puyuelo, Andrea
  • Garcia, Xènia
  • Llorca, Jordi
  • Reyero, Inés
  • Bimbela, F.
  • Gandía, Luis M.
In the present study, new ceria-based high-entropy oxides (HEOs) were investigated as CO2 hydrogenation catalysts. The nominal composition was (Ce0.5Ni0.1Co0.1Cu0.1Zn0.1Mg0.1)Ox and the synthesis was accomplished through the citrate complexing sol–gel method. Characterization techniques utilized including ICP-AES, in situ XRD and in situ XPS, SEM-EDS, HR-TEM and HAADF-STEM, Raman spectroscopy, H2-TPR, CO2-TPD and N2 physical adsorption. The physicochemical characterization and the catalytic results revealed that the conditions of the thermal treatments at which the oxides were subjected critically determined the catalytic performance, especially the CO2 hydrogenation products selectivities. Calcination in air and/or reduction in hydrogen conducted at temperatures below 500 °C led to active but poorly selective catalysts that produced both methane and CO with significant yields. This was mainly attributed to the presence of metallic Cu, Ni and Co on the catalysts that appeared to be supported on ceria doped with the rest of the formulation elements. In contrast, thermal treatments at 750 °C favored the formation of a rocksalt entropy-stabilized (NiCoCuZnMg)Ox HEO supported on ceria that has stood out for showing an excellent selectivity towards the reverse water–gas shift (RWGS) reaction. This catalyst led to CO selectivities of almost 100 % over a very wide range of reaction temperatures (300–700 °C). Long-term stability tests (100 h) showed only a slight decrease in CO2 conversion, while CO selectivity remained stable at nearly 100 % at 400 °C. XRD characterization of the used catalysts evidenced that, whereas the basic catalyst structure remained, some metallic copper exsolved during reduction and reaction period. These results are relevant and very promising, opening a door to the development of new catalysts for the valorization of CO2 through the RWGS reaction, thus expanding the low-temperature limit at which this process can be carried out selectively., Authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), the European Regional Development Fund (ERDF/FEDER), the European Union’s NextGenerationEU funds for their financial support. In particular, this work was partially funded by the following research projects: TED2021-130846B-I00 (MULTIeFUEL project), PID2021-127265OB-C21 (SOLFUEL project), PLEC2022-009221 (Panel-to-Fuel project), PID2021-124572OB-C31, and CEX2023-001300-M. M. Cortazar and M. Lafuente also thank Ministerio de Universidades (Spain) and NextGenerationEU funds for their ¨Margarita Salas¨ postdoctoral grants. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001300-M)., Open access funding provided by Universidad Pública de Navarra., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia-Centeno, Karol V.
  • Montaña-Mora, Guillem
  • Chacón-Borrero, Jesús
  • Xue, Qian
  • Gong, Li
  • Martí-Sànchez, Sara
  • Berlanga, Armando
  • Llorca, Jordi
  • Ibáñez, María
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 min, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is founding member of e-DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Qi, Xueqiang
  • Xue, Qian
  • Chacón-Borrero, Jesús
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Andreu, Teresa
  • Salazar-Álvarez, G.
  • Güell, F.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH)<inf>2</inf> pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH<sup>−</sup> supply to the catalyst surface for Ni(OH)<inf>2</inf> reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C−C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO<inf>2</inf> facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni<sup>3+</sup> species., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors acknowledge funding from project PID2020-116612RB-C32, PID2022-138491OB-C33, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 European Union NextGenerationEU/PRTR. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. This study is part of the Advanced Materials program and In-CAEM project, supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. This work is in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.40 IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. ICN2 thank the support from project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 acknowledge the support from the Severo Ochoa Programme (MINECO, grant no. CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano, Isabel
  • Arbiol, Jordi
  • Cabot, Andreu
  • Llorca, Jordi
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8◊10−5 molCO2 mCu−2 s−1 with over 99% CO selectivity at 450 °C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., This work was financially supported by projects MCIN/AEI/FEDER PID2021-124572OB-C31, PID2023-149158OB-C43 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, GC 2021 SGR 01061 grant, and the SyDECat project from Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. X.L. and J.Y. are grateful to the China Scholarship Council (CSC) for the scholarship support. IREC authors acknowledge funding from Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. [45] J. Li is grateful for the Natural Science Foundation of Sichuan project (2025NSFSC0139)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting high-loading zinc-ion battery performance: Zn-Doped δ-MnO2 cathodes to promote Zn2+ storage

  • Chacón-Borrero, Jesús
  • Chang, Xingqi
  • Min, Zhiwen
  • Yu, Jing
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Sun, Yuanmiao
  • Zhou, Xiaolong
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
Rechargeable aqueous zinc-ion batteries (AZIBs) have emerged as a leading contender for stationary energy storage systems due to their low cost, safety, and environmental sustainability. However, their widespread practical application is hindered by the limited stability and capacity of current AZIB cathodes, such as manganese oxide (MnO<inf>2</inf>), which affects their long-term cost-effectiveness. To overcome this limitation, we introduce zinc (Zn) doping in δ-MnO<inf>2</inf>, which modulates the electronic states of Mn atoms, suppresses Jahn–Teller distortion, and enhances structural stability. Additionally, the use of a binder-free, self-supported porous electrode without current collectors facilitates three-dimensional ion diffusion, further improving electrochemical performance. As a result, the assembled AZIBs demonstrate outstanding rate capability, delivering 440 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and retaining 118 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup> for Zn-doped δ-MnO<inf>2</inf>, outperforming the bare δ-MnO<inf>2</inf> with 356 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and 80 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup>. Additionally, the Zn-doped δ-MnO<inf>2</inf> exhibits excellent cycling performance with ∼100 % capacity retention after 6000 cycles at 150 mAh∙g<sup>-1</sup> at 10 A∙g<sup>-1</sup>. Furthermore, Zn-doped MnO<inf>2</inf> electrodes integrated with carbon nanotubes achieve a high capacity of ∼210 mAh∙g<sup>-1</sup>, even at an ultrahigh mass loading (∼20 mg∙cm<sup>-2</sup>) at 0.6 mA∙g<sup>-1</sup>. While energy storage in MnO<inf>2</inf> involves the reaction and insertion of H<sup>+</sup>, Mn<sup>2+</sup>, and Zn<sup>2+</sup> cations, density functional theory calculations reveal that Zn intercalation is the dominant storage mechanism in these cells. Overall, this study highlights the potential of Zn-doped MnO<inf>2</inf> cathodes as a promising strategy for advancing the stability, capacity, and rate performance of next-generation AZIBs., This work was supported by the project SyDECat (PID2022–136883OB-C22), financed by the Spanish MCIN/AEI, EHAWEDRY (964524), financed by European EXCELLENT SCIENCE – Further and Emerging Technologies, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), and the Foundation of the National Research Council of Thailand (N42A650253). Thanks to the China Scholarship Council (CSC) for the scholarship support. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022–134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. [59] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MCIN/FEDER PID2021–124572OB-C31, CEX2023–001300-M, and GC 2021 SGR 01061., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cu and Ga dual sites on Ce0.9Zr0.1O2 for CO2 hydrogenation to methanol

  • Lu, Xuan
  • Garcia, Xènia
  • Serrano, Isabel
  • Biset-Peiró, Martí
  • Yu, Jing
  • Li, Junshan
  • Arbiol, Jordi
  • Cabot, Andreu
  • Llorca, Jordi
Cu-based catalysts are highly attractive for CO<inf>2</inf> hydrogenation to methanol due to their efficiency, selectivity, and cost-effectiveness. To further accelerate methanol synthesis, dual-site activation mechanisms are particularly effective. In this direction, solid solutions serve as effective supports, enhancing methanol production through improved hydrogenation, though the exact nature of the active sites in CuGa-based solid solutions remains unclear. In this study, we examine the synergistic interactions between Ga and Cu nanoparticles/clusters deposited on Ce<inf>0.9</inf>Zr<inf>0.1</inf>O<inf>2</inf> for CO<inf>2</inf>-to-methanol hydrogenation. Through in situ diffuse reflectance infrared Fourier transform spectroscopy and temperature-programmed (TPR/TPD), we analyze the nature of the active sites and elucidate the reaction pathway. The results demonstrate that CO<inf>2</inf> adsorption and activation are favored by the appropriate Cu/Ga ratio, while Ga sites, in addition to Cu, play a critical role in promoting H<inf>2</inf> dissociation under methanol synthesis conditions. Furthermore, the oxygen vacancies in the CuGa/Ce<inf>0.9</inf>Zr<inf>0.1</inf>O<inf>2</inf> catalyst play a crucial role in stabilizing the key *HCOO intermediate, facilitating its further hydrogenation to methanol via the formate pathway. This synergy between Ga and Cu optimizes both CO<inf>2</inf> activation and hydrogenation steps, emphasizing Ga as an active site alongside Cu and highlighting the catalyst's potential for efficient methanol production from CO<inf>2</inf>., This research was funded by projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and GC 2021 SGR 01061 grant. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. X.L. and J.Y. are grateful to the China Scholarship Council (CSC) for the scholarship support. This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). IREC authors acknowledge funding from Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM.[52] J. Li is grateful for the project from the Natural Science Foundation of Sichuan Province (2025ZNSFSC0139)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2 Nanoheterostructures with Enhanced OER Performance

  • Chacón-Borrero, Jesús
  • Martí-Sànchez, Sara
  • Zhang, Xuesong
  • Lu, Xuan
  • Montaña-Mora, Guillem
  • Xue, Qian
  • Berlanga, Armando
  • Llorca, Jordi
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Guardia, Pablo
  • Cabot, Andreu
We report a colloidal synthesis strategy for producing MnxOy@Ni(OH)2 nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnxOy@Ni(OH)2 heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnxOy@Ni(OH)2 achieves a low overpotential of 299 mV at 10 mA cm-2, a Tafel slope of 61 mV dec-1, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)2 nanosheets, which facilitate *OOH intermediate formation, and the MnO2 component, known for its intrinsic catalytic activity. Additionally, Mn3O4 serves as a stabilizing phase and precursor to MnO2, contributing to the overall durability and structural integrity of the catalyst., The authors thank the support from the Spanish Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 (Grant No. PID2022-136883OB-C22-project SyDECat- and Grant No. CNS2022-135583). P.G. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and from FSE+ within the Ramón y Cajal program (RYC2019-028414) and the ‘Severo Ochoa’. Program for Center of Excellence in R&D (Grant No. CEX2023-001263-S). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICIN/AEI/FEDER PID2021-124572OB-C31 and CEX2023-001300-M, and GC 2021 SGR 01061. ICN2 acknowledges funding from the Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by the Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AmaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDFA way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac|||0009-0005-5699-466X
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel|||0000-0002-0890-0842
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • de Benito, Carola
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria|||0000-0003-1311-9062
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • García de Andrés, Xènia|||0000-0003-0795-4168
  • Garzón Manjón, Alba
  • Hu, Xinxin
  • Arbiol, Jordi
  • Pascua Solé, Laia|||0000-0001-9791-4586
  • Prat Albert, Jordi
  • Villalobos Portillo, Edgar Eduardo
  • Marini, Carlo
  • Escudero, Carlos
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors., This work was funded by MICINN/FEDER PID2021-124572OB-C31 and PID2021-124572OB-C33 and 2021 SGR 01061 projects. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Program/Generalitat de Catalunya. A.G.M. is grateful to Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tuning amorphous-crystalline catalytic interfaces by mechanochemistry: Cu-based metallic glasses coupled with ceria for CO oxidation

  • Mirzay Shahim, Maahin
  • Nabahat, Mehran
  • Pascua Solé, Laia|||0000-0001-9791-4586
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • Lucentini, Ilaria|||0000-0003-1311-9062
  • García de Andrés, Xènia|||0000-0003-0795-4168
  • Armengol Profitós, Marina
  • Agrelo Lestón, Asier|||0000-0002-4744-7278
  • Burgués Ceballos, Ignasi|||0000-0002-8183-0705
  • Jiménez Divins, Nuria|||0000-0001-6010-5419
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Marini, Carlo
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Bruna Escuer, Pere|||0000-0002-7411-1278
  • Fàbrega Soler, LLuís
Amorphous metallic alloys, with their liquid-like atomic-scale structure, are promising candidates for developing unprecedented heterogeneous catalysts due to their non-equilibrium, highly disordered state. This study explores the combination of copper-based metallic glasses with crystalline ceria as catalysts for CO oxidation and preferential CO oxidation. The amorphous/crystalline interfaces are synthesized mechanochemically, offering a cost-effective alternative to the use of precious metals while maintaining high catalytic activity. Key parameters of the ball milling process are optimized, namely milling time and frequency, to enhance the interaction between the disordered metal and crystalline ceria, and the new catalysts are thoroughly characterized using ex situ techniques (XRD, DSC, HAADF-STEM-EDX, H2-TPR, Raman spectroscopy, and XPS), and under operando conditions (XAFS and NEXAFS). These analyses reveal that the amorphous/crystalline architectures play a crucial role in catalytic performance. The results show that combining amorphous Cu-based metallic glasses with crystalline CeO2 delivers remarkable catalytic activity in preferential CO oxidation (T50 = 115 °C; 43.1 ± 0.4 mol CO2 min-1 gcatalyst-1), pointing to a sustainable and efficient design strategy of catalysts. This approach reduces reliance on noble metals while leveraging the synergy between structural disorder and crystallinity, thereby opening new directions for next-generation catalyst development., This work was supported by MICINN/FEDER projects PID2021- 124572OB-C31, PID2021-124572OB-C33 and PID2023-146623NBI00, Generalitat de Catalunya/AGAUR grants 2021SGR00343 and 2021SGR01061, and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033. AA is grateful to PhD grant FPI2019 PRE2019-088694. LS and IBC are grateful to the MICINN Ramon y Cajal program RYC2019-026704 and RYC2022-035399-I. JL is a Serra Húnter Fellow and is grateful to the ICREA Academia program. IJVG acknowledges support from MCIN/AEI/10.13039/501100011033 and European Union´s NextGenerationEU through grants CNS2022-135285 and PID2023-147200OB-100. HAADF-STEM-EDX was performed at the Joint Electron Microscopy Center (JEMCA) at ALBA Synchrotron with the collaboration of ALBA staff. XRD, XAS, and NEXAFS measurements were performed at the NOTOS (proposal 2023097872) and CIRCE (proposal 2023027431) beamlines at ALBA Synchrotron with the collaboration of ALBA staff., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia Centeno, Karol V.
  • Montaña Mora, Guillem
  • Chacón Borrero, Jesús
  • Xue, Qian
  • Martí-Sánchez, Sara
  • Berlanga Vázquez, Armando
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Arbiol Cobos, Jordi
  • Qi, Xueqiang
  • Martinez Alanis, Paulina Raquel
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 minutes, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and Euro pean Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of ence, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR- C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA gramme / Generalitat de Catalunya. ICN2 is founding member of e- DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., 7 - Energia Assequible i No Contaminant, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bimetallic nanoparticles as cocatalysts for photocatalytic hydrogen production

  • Chen, Yufen
  • Agrelo Lestón, Asier|||0000-0002-4744-7278
  • Burgués Ceballos, Ignasi|||0000-0002-8183-0705
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Soler Turu, Lluís|||0000-0003-1591-3366
Recent developments have introduced bimetallic nanoparticles as effective cocatalysts for photocatalytic systems. This review explores the rapidly expanding research on bimetallic cocatalysts for photocatalytic production of hydrogen, emphasizing the creation of carrier-selective contacts, localized surface plasmon resonance effects, methodologies for their preparation, promising metal combinations as cocatalyst materials and operando studies of bimetallic cocatalysts in order to study how the metallic components of the cocatalyst reorganize in real-time under light exposure during the photocatalytic reactions and, hence, to establish structure-property relationships that could explain the observed photocatalytic performance. The goal of this review is to furnish readers with a comprehensive overview of photocatalytic hydrogen production boosted by bimetallic nanoparticles and to inspire further innovative studies on bimetallic cocatalytic materials, which can potentially revolutionize applications in energy and materials science., Y.C. and A.A.-L. contributed equally to this work. This work was supported by projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. This work was part of the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MCIN/AEI /10.13039/501100011033. Y.C. (CSC No. 201806920042) acknowledges the China Scholarship Council for Ph.D. scholarship support. A.A.-L. (PRE2019-088694) acknowledges MICINN for PhD scholarship support. I.B.C. thanks MICINN for funding through the Ramón y Cajal fellowship, grant ref. RYC2022-035399-I. L.S. is grateful to MICINN Ramón y Cajal program for an individual fellowship grant agreement RYC2019-026704-I. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program. The authors thank Joaquim Puigdollers for fruitful discussions and proofreading of the manuscript., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Perovskite-derived MnOx/LaMnO3 nanocomposites to boost CO oxidation activity

  • Felli, Andrea
  • Toso, Alessandra
  • Braga, Andrea
  • Colussi, Sara
  • Boaro, Marta
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Truscott, Byron
  • Artner Wallner, Christine
  • Trovarelli, Alessandro
In this study, the impact of nitric acid treatment parameters, specifically acid concentration and exposure time, on the morphological, redox, and catalytic properties of LaMnO3 for CO oxidation was thoroughly investigated. The samples were characterised by ICP analysis, N2 adsorption/desorption measurements, XRD, H2-TPR, XPS, HRTEM and HAADF-STEM. Acidic treatment of LaMnO3 significantly increases the surface area, creating a new porous structure. Under mild treatment conditions, the composition, crystal structure and morphology are also modified, resulting in MnOx/LaMnO3 catalysts with various Mn oxide species forming needle-like structures segregated on a highly defective La1-xMnO3-d perovskite. These MnOx/LaMnO3 nanocomposites exhibited superior CO oxidation activity, achieving 10% CO conversion (T10) in the range of 375–396 K, compared to 459 K for the pristine perovskite. This enhanced performance is attributed not only to the increased surface area, but also to the exposure of reactive MnOx species on the surface of the perovskite and, crucially, to the interfacial synergism between MnOx and LaMnO3. This synergy enhances oxygen exchange, and it improves the reducibility of the nanocomposite at low temperatures, providing a better thermal stability of active phases at elevated temperatures. However, the benefits of the acid treatment are lost under more severe conditions that transform LaMnO3 into bulk Mn oxide phases (Mn2O3, Mn3O4), or pure MnO2, highlighting the critical role of MnOx/LaMnO3 interface properties for CO oxidation., A. F. is grateful for funding under the REACT EU Italian PON 2014-2020 Program, Action IV.4 – Innovation and Action IV.5 – Green (DM 1062, 10/08/2021). J. L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICIN/FEDER PID2021-124572OB-C31, CEX2023-001300-M (MCIN/AEI/10.13039/501100011033), and GC 2017 SGR 128. M. B. thanks MIUR for funding (PRIN project-DIRECTBIOSOFC, 2017FCFYHK, 2019–2022).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • Arbiol Cobos, Jordi
  • Cabot, Andreu
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8¿10-5 molCO2 mCu-2 s-1 with over 99% CO selectivity at 450°C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., 13 - Acció per al Clima, 7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quasi-1D SbSeI as a photocathode for light-driven hydrogen production

  • Maggi, Edoardo
  • Navarro Güell, Alejandro
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Segura Blanch, Oriol
  • Calvo Barrio, Lorenzo
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
This work reports the first functional implementation of SbSeI as a photocathode for photoelectrochemical hydrogen production via water splitting. SbSeI is a quasi-one-dimensional chalcohalide semiconductor that naturally forms nano/micro-ribbon structures, offering highly anisotropic charge transport and an increased interfacial surface area for photoelectrochemical reactions when properly oriented. Operating in neutral phosphate buffer, the SbSeI devices achieve a photocurrent density of 1.2 mA cm-2, a half-cell solar-to-hydrogen efficiency of 0.4%, and an onset potential of 0.6 VRHE. Stable hydrogen evolution is sustained under continuous operation, demonstrating the intrinsic robustness of the material system under working conditions. A comprehensive structural, morphological, and photoelectrochemical characterization is presented, elucidating how absorber morphology and interfacial engineering govern charge transfer, efficiency, and stability. Importantly, these performances are achieved using simple device architectures, neutral electrolytes, and without reliance on scarce or noble metal nanoparticle catalysts, highlighting SbSeI as a sustainable and promising photocathode material for solar-driven hydrogen production., This project received funding from the European Union's H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain/FEDER projects number PID2023-148976OB-C41/C44 (CURIO-CITY), PID2021-124572OB-C31 (HYNTERCAT) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program). The authors belong to the ‘‘Micro and Nanotechnologies for Solar Energy Group’’ (MNTSolar) and ‘‘Energy, Catalysis, Process and Reaction Engineering’’ (ENCORE) consolidated research groups of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286 and 2021 SGR 01061, respectively). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. A.N. acknowledges the Spanish Ministry of Science and Innovation for his FPI PhD grant (PRE-2021-098293. E.S. is grateful to ICREA Academia program. L.S. is grateful to the MICINN Ramon y Cajal program (grant agreement RYC2019-026704)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bismuth boosts the preferential oxidation of CO over Pt/Al2O3 by regulating the reactant adsorption and reaction route

  • Lou, Yake
  • Wu, Qianqiu
  • Shen, Jia
  • Jiménez Divins, Nuria|||0000-0001-6010-5419
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Guo, Yanglong
  • Zhan, Wangcheng
  • Wang, Aiyong
  • Wang, Li|||0000-0001-5538-4337
  • Guo, Yun
Preferential oxidation of CO (CO-PROX) reaction is an attractive option for hydrogen purification, where the most commonly used Pt-based catalysts suffer from unsatisfactory low-temperature activity. Here, bismuth (Bi) was introduced to improve the catalytic performance of Pt/Al2O3 for the CO-PROX reaction, and the CO conversion of Pt-0.5 wt% Bi/Al2O3 was threefold higher than that of Pt/Al2O3 at around 80 °C and CO could be completely oxidized in the range of 112–175 °C with theoretical O2 selectivity (50 %). Besides, the Pt-0.5 wt% Bi/Al2O3 exhibited great stability even in the presence of CO2 and H2O. The characterization results showed that Pt tended to selectively deposit on Bi2O3, which further decreased CO adsorption intensity due to electron transfer from Pt to Bi. Meanwhile, O2 activation can be strengthened at the Pt-O-Bi interface and the competitive adsorption between CO and H2 can also be tuned. The presence of Bi strengthened the promotion effect of H2 and further promoted the generation of HCOO– species, which were the active intermediates of the CO-PROX reaction., This work was supported financially by the National Key Research and Development Program of China (2022YFB3504200), the National Natural Science Foundation of China (U21A20326 and 22376063), and Fundamental Research Funds for the Central Universities. Y.L. (CSC No. 202006740085) is grateful for the grant from the China Scholarship Council. J.L. is grateful to the ICREA Academia program and grants PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and GC 2021 SGR 01061., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria
  • Serrano Carreño, M. Isabel
  • García de Andrés, Xènia
  • Garzón Manjón, Alba
  • Hu, Xinxin
  • Arbiol, Jordi
  • Pascua Solé, Laia
  • Prat Albert, Jordi
  • Villalobos Portillo, Edgar Eduardo
  • Marini, Carlo
  • Escudero, Carlos
  • Llorca Piqué, Jordi
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors., This work was funded by MICINN/FEDER PID2021-124572OB-C31 and PID2021-124572OB-C33 and 2021 SGR 01061 projects. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Program/Generalitat de Catalunya. A.G.M. is grateful to Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
  • de Benito, Carola
  • Llorca Piqué, Jordi
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bimetallic nanoparticles as cocatalysts for photocatalytic hydrogen production

  • Chen, Yufen
  • Agrelo Lestón, Asier
  • Burgués Ceballos, Ignasi
  • Llorca Piqué, Jordi
  • Soler Turu, Lluís
Recent developments have introduced bimetallic nanoparticles as effective cocatalysts for photocatalytic systems. This review explores the rapidly expanding research on bimetallic cocatalysts for photocatalytic production of hydrogen, emphasizing the creation of carrier-selective contacts, localized surface plasmon resonance effects, methodologies for their preparation, promising metal combinations as cocatalyst materials and operando studies of bimetallic cocatalysts in order to study how the metallic components of the cocatalyst reorganize in real-time under light exposure during the photocatalytic reactions and, hence, to establish structure-property relationships that could explain the observed photocatalytic performance. The goal of this review is to furnish readers with a comprehensive overview of photocatalytic hydrogen production boosted by bimetallic nanoparticles and to inspire further innovative studies on bimetallic cocatalytic materials, which can potentially revolutionize applications in energy and materials science., Y.C. and A.A.-L. contributed equally to this work. This work was supported by projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. This work was part of the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MCIN/AEI /10.13039/501100011033. Y.C. (CSC No. 201806920042) acknowledges the China Scholarship Council for Ph.D. scholarship support. A.A.-L. (PRE2019-088694) acknowledges MICINN for PhD scholarship support. I.B.C. thanks MICINN for funding through the Ramón y Cajal fellowship, grant ref. RYC2022-035399-I. L.S. is grateful to MICINN Ramón y Cajal program for an individual fellowship grant agreement RYC2019-026704-I. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program. The authors thank Joaquim Puigdollers for fruitful discussions and proofreading of the manuscript., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano Carreño, M. Isabel
  • Arbiol Cobos, Jordi
  • Cabot, Andreu
  • Llorca Piqué, Jordi
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8¿10-5 molCO2 mCu-2 s-1 with over 99% CO selectivity at 450°C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., 13 - Acció per al Clima, 7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Macroporous silicon structures in 700 nm and 500 nm

  • Rodríguez Martínez, Ángel
  • Vega Bru, Didac
  • Llorca Piqué, Jordi
Macroporous Silicon is a structured material with which innovative optical and electrical characteristics can be obtained. It consists in a crystalline silicon slab where tubular perforations are made. Several fabrication methods exist, electrochemical etching being one of the most versatile. With it, the diameter of the pores can be modulated in depth, resulting in 3D structures. Also, structures with very large aspect ratio (depth / diameter) can be achieved. One particular field of use of macroporous silicon is in photonics. Such applications generally require the fabrication of ordered structures whose dimensions are directly correlated with the optical response of the fabricated devices. In particular pore diameter and lattice pitch define the working wavelengths of the devices. Common uses of optical technology in areas such as communications or gas sensing require working with wavelengths in the Near Infrared (NIR) and the Medium Infrared (MIR) regions. That is, for wavelengths ranging from 1 to 20 microns. Devices able to work in the shorter wavelengths thus call for photonic structures of smaller dimensions. To enable such devices, the macroporous silicon fabrication technology has been developed and improved to allow the fabrication of structures with 700 nm and 500 nm lattice pitch., This work has been funded by the Spanish Ministerio de Ciencia e Innovación with grant PID2021-124572OB-C31. The authors declare no conflict of interest., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia Centeno, Karol V.
  • Montaña Mora, Guillem
  • Chacón Borrero, Jesús
  • Xue, Qian
  • Martí-Sánchez, Sara
  • Berlanga Vázquez, Armando
  • Llorca Piqué, Jordi
  • Arbiol Cobos, Jordi
  • Qi, Xueqiang
  • Martinez Alanis, Paulina Raquel
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 minutes, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and Euro pean Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of ence, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR- C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA gramme / Generalitat de Catalunya. ICN2 is founding member of e- DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., 7 - Energia Assequible i No Contaminant, 13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Perovskite-derived MnOx/LaMnO3 nanocomposites to boost CO oxidation activity

  • Felli, Andrea
  • Toso, Alessandra
  • Braga, Andrea
  • Colussi, Sara
  • Boaro, Marta
  • Llorca Piqué, Jordi
  • Truscott, Byron
  • Artner Wallner, Christine
  • Trovarelli, Alessandro
In this study, the impact of nitric acid treatment parameters, specifically acid concentration and exposure time, on the morphological, redox, and catalytic properties of LaMnO3 for CO oxidation was thoroughly investigated. The samples were characterised by ICP analysis, N2 adsorption/desorption measurements, XRD, H2-TPR, XPS, HRTEM and HAADF-STEM. Acidic treatment of LaMnO3 significantly increases the surface area, creating a new porous structure. Under mild treatment conditions, the composition, crystal structure and morphology are also modified, resulting in MnOx/LaMnO3 catalysts with various Mn oxide species forming needle-like structures segregated on a highly defective La1-xMnO3-d perovskite. These MnOx/LaMnO3 nanocomposites exhibited superior CO oxidation activity, achieving 10% CO conversion (T10) in the range of 375–396 K, compared to 459 K for the pristine perovskite. This enhanced performance is attributed not only to the increased surface area, but also to the exposure of reactive MnOx species on the surface of the perovskite and, crucially, to the interfacial synergism between MnOx and LaMnO3. This synergy enhances oxygen exchange, and it improves the reducibility of the nanocomposite at low temperatures, providing a better thermal stability of active phases at elevated temperatures. However, the benefits of the acid treatment are lost under more severe conditions that transform LaMnO3 into bulk Mn oxide phases (Mn2O3, Mn3O4), or pure MnO2, highlighting the critical role of MnOx/LaMnO3 interface properties for CO oxidation., A. F. is grateful for funding under the REACT EU Italian PON 2014-2020 Program, Action IV.4 – Innovation and Action IV.5 – Green (DM 1062, 10/08/2021). J. L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICIN/FEDER PID2021-124572OB-C31, CEX2023-001300-M (MCIN/AEI/10.13039/501100011033), and GC 2017 SGR 128. M. B. thanks MIUR for funding (PRIN project-DIRECTBIOSOFC, 2017FCFYHK, 2019–2022)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tuning amorphous-crystalline catalytic interfaces by mechanochemistry: Cu-based metallic glasses coupled with ceria for CO oxidation

  • Mirzay Shahim, Maahin
  • Nabahat, Mehran
  • Pascua Solé, Laia
  • Serrano Carreño, M. Isabel
  • Lucentini, Ilaria
  • García de Andrés, Xènia
  • Armengol Profitós, Marina
  • Agrelo Lestón, Asier
  • Burgués Ceballos, Ignasi
  • Jiménez Divins, Nuria
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Marini, Carlo
  • Llorca Piqué, Jordi
  • Pineda Soler, Eloi
  • Bruna Escuer, Pere
  • Fàbrega Soler, LLuís
Amorphous metallic alloys, with their liquid-like atomic-scale structure, are promising candidates for developing unprecedented heterogeneous catalysts due to their non-equilibrium, highly disordered state. This study explores the combination of copper-based metallic glasses with crystalline ceria as catalysts for CO oxidation and preferential CO oxidation. The amorphous/crystalline interfaces are synthesized mechanochemically, offering a cost-effective alternative to the use of precious metals while maintaining high catalytic activity. Key parameters of the ball milling process are optimized, namely milling time and frequency, to enhance the interaction between the disordered metal and crystalline ceria, and the new catalysts are thoroughly characterized using ex situ techniques (XRD, DSC, HAADF-STEM-EDX, H2-TPR, Raman spectroscopy, and XPS), and under operando conditions (XAFS and NEXAFS). These analyses reveal that the amorphous/crystalline architectures play a crucial role in catalytic performance. The results show that combining amorphous Cu-based metallic glasses with crystalline CeO2 delivers remarkable catalytic activity in preferential CO oxidation (T50 = 115 °C; 43.1 ± 0.4 mol CO2 min-1 gcatalyst-1), pointing to a sustainable and efficient design strategy of catalysts. This approach reduces reliance on noble metals while leveraging the synergy between structural disorder and crystallinity, thereby opening new directions for next-generation catalyst development., This work was supported by MICINN/FEDER projects PID2021- 124572OB-C31, PID2021-124572OB-C33 and PID2023-146623NBI00, Generalitat de Catalunya/AGAUR grants 2021SGR00343 and 2021SGR01061, and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033. AA is grateful to PhD grant FPI2019 PRE2019-088694. LS and IBC are grateful to the MICINN Ramon y Cajal program RYC2019-026704 and RYC2022-035399-I. JL is a Serra Húnter Fellow and is grateful to the ICREA Academia program. IJVG acknowledges support from MCIN/AEI/10.13039/501100011033 and European Union´s NextGenerationEU through grants CNS2022-135285 and PID2023-147200OB-100. HAADF-STEM-EDX was performed at the Joint Electron Microscopy Center (JEMCA) at ALBA Synchrotron with the collaboration of ALBA staff. XRD, XAS, and NEXAFS measurements were performed at the NOTOS (proposal 2023097872) and CIRCE (proposal 2023027431) beamlines at ALBA Synchrotron with the collaboration of ALBA staff., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bismuth boosts the preferential oxidation of CO over Pt/Al2O3 by regulating the reactant adsorption and reaction route

  • Lou, Yake
  • Wu, Qianqiu
  • Shen, Jia
  • Jiménez Divins, Nuria
  • Llorca Piqué, Jordi
  • Guo, Yanglong
  • Zhan, Wangcheng
  • Wang, Aiyong
  • Wang, Li
  • Guo, Yun
Preferential oxidation of CO (CO-PROX) reaction is an attractive option for hydrogen purification, where the most commonly used Pt-based catalysts suffer from unsatisfactory low-temperature activity. Here, bismuth (Bi) was introduced to improve the catalytic performance of Pt/Al2O3 for the CO-PROX reaction, and the CO conversion of Pt-0.5 wt% Bi/Al2O3 was threefold higher than that of Pt/Al2O3 at around 80 °C and CO could be completely oxidized in the range of 112–175 °C with theoretical O2 selectivity (50 %). Besides, the Pt-0.5 wt% Bi/Al2O3 exhibited great stability even in the presence of CO2 and H2O. The characterization results showed that Pt tended to selectively deposit on Bi2O3, which further decreased CO adsorption intensity due to electron transfer from Pt to Bi. Meanwhile, O2 activation can be strengthened at the Pt-O-Bi interface and the competitive adsorption between CO and H2 can also be tuned. The presence of Bi strengthened the promotion effect of H2 and further promoted the generation of HCOO– species, which were the active intermediates of the CO-PROX reaction., This work was supported financially by the National Key Research and Development Program of China (2022YFB3504200), the National Natural Science Foundation of China (U21A20326 and 22376063), and Fundamental Research Funds for the Central Universities. Y.L. (CSC No. 202006740085) is grateful for the grant from the China Scholarship Council. J.L. is grateful to the ICREA Academia program and grants PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and GC 2021 SGR 01061., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zheng, Renji
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl, CHCOO, NO , SO ) on the surface of an amorphous ZnCoNiO catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCoNiO-SO catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm with a small Tafel slope of 41.6 mV dec. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO , can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering of Thermoelectric Composites Based on Silver Selenide in Aqueous Solution and Ambient Temperature

  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Yu|||0000-0002-0332-0013
  • Xiao, Ke
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Chang, Cheng|||0000-0002-9515-4277
  • Han, Xu|||0000-0001-8319-8830
  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The direct, solid state, and reversible conversion between heat and electricity using thermoelectric devices finds numerous potential uses, especially around room temperature. However, the relatively high material processing cost limits their real applications. Silver selenide (AgSe) is one of the very few n-type thermoelectric (TE) materials for room-temperature applications. Herein, we report a room temperature, fast, and aqueous-phase synthesis approach to produce AgSe, which can be extended to other metal chalcogenides. These materials reach TE figures of merit (zT) of up to 0.76 at 380 K. To improve these values, bismuth sulfide (BiS) particles also prepared in an aqueous solution are incorporated into the AgSe matrix. In this way, a series of AgSe/BiS composites with BiS wt % of 0.5, 1.0, and 1.5 are prepared by solution blending and hot-press sintering. The presence of BiS significantly improves the Seebeck coefficient and power factor while at the same time decreasing the thermal conductivity with no apparent drop in electrical conductivity. Thus, a maximum zT value of 0.96 is achieved in the composites with 1.0 wt % BiS at 370 K. Furthermore, a high average zT value (zT) of 0.93 in the 300-390 K range is demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Brookite TiO2 Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows

  • Xing, Congcong|||0000-0001-7674-6720
  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Zhang, Yu|||0000-0002-0332-0013
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Junshan|||0000-0002-1482-1972
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Liu, Yu|||0000-0001-7313-6740
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm C at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li ion intercalation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Facet-engineered TiO2 drives photocatalytic activity and stability of supported noble metal clusters during H2 evolution

  • Chen, Yufen
  • Soler, Lluís|||0000-0003-1591-3366
  • Cazorla, Claudio|||0000-0002-6501-4513
  • Oliveras i Solà, Jana
  • Bastús, Neus G|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Llorca, Jordi|||0000-0002-7447-9582
Metal clusters supported on TiO are widely used in many photocatalytic applications, including pollution control and production of solar fuels. Besides high photoactivity, stability during the photoreaction is another essential quality of high-performance photocatalysts, however systematic studies on this attribute are absent for metal clusters supported on TiO. Here we have studied, both experimentally and with first-principles simulation methods, the stability of Pt, Pd and Au clusters prepared by ball milling on nanoshaped anatase nanoparticles preferentially exposing {001} (plates) and {101} (bipyramids) facets during the photogeneration of hydrogen. It is found that Pt/TiO exhibits superior stability than Pd/TiO and Au/TiO, and that {001} facet-based photocatalysts always are more stable than their {101} analogous regardless of the considered metal species. The loss of stability associated with cluster sintering, which is facilitated by the transfer of photoexcited carriers from the metal species to the neighbouring Ti and O atoms, most significantly and detrimentally affects the H-evolution photoactivity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria
  • Serrano, Isabel
  • Garcia, Xènia|||0000-0003-0795-4168
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Hu, Xinxin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pascua-Solé, Laia
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Villalobos-Portillo, Edgar Eduardo|||0000-0003-4344-4181
  • Marini, Carlo
  • Escudero, Carlos|||0000-0001-8716-9391
  • Llorca, Jordi|||0000-0002-7447-9582
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-Atom Catalysts with Unsaturated Co-N2 Active Sites Based on a C2N 2D-Organic Framework for Efficient Sulfur Redox Reaction

  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Jiaao|||0000-0002-4944-4951
  • Lou, Chenjie
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Ramon, Alberto
  • Li, Canhuang
  • Tang, Mingxue|||0000-0002-7282-4100
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Xu, Ming
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Mitlin, David
  • Zhou, Guangmin|||0000-0002-3629-5686
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The lithium-sulfur battery (LSB) is a viable option for the next generation of energy storage systems. However, the shuttle effect of lithium polysulfides (LiPS) and the poor electrical conductivity of sulfur and lithium sulfides limit its deployment. Here, we report on a 2D-organic framework, C2N, with a high loading of low-coordination cobalt single atoms (Co-SAs/C2N) as an effective sulfur host in LSB cathodes. Experimental and computational results reveal that unsaturated Co-N2 active sites with an asymmetric electron distribution act as effective polysulfide traps, accommodating electrons from polysulfide ions to form strong Sx2--Co-N bonds. Additionally, charge transfer between LiPS and unsaturated Co-N2 active sites endows immobilized LiPS with low free energy and low electrochemical decomposition energy barriers, thus accelerating the kinetic conversion of LiPS. As a result, S@Co-SAs/C2N-based cathodes exhibit superior rate performance, impressive cycling stability, and good areal capacity at high sulfur loading, 2-fold that of commercial lithium-ion batteries. This work emphasizes the potential capabilities and promising prospects of single-atom catalysts with unsaturated coordination in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synergistic effect of surface oxygen vacancies and hydroxyl groups on Cu-doped TiO2 photocatalyst for hydrogen evolution

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Zhaofu
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Yang, Linlin|||0009-0006-9953-5698
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Martinez, Paulina
  • Demir, Muslum
  • Piveteau, Laura
  • Florian, Pierre|||0000-0003-4306-0815
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Guo, Yuzheng
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The intricate nature of the titanium dioxide (TiO2) photocatalytic system, influenced by Cu doping, often yields conflicting outcomes. This study addresses this complexity by examining the impact of Cu ion doping in nanostructured TiO2 to augment its photocatalytic efficacy in hydrogen generation from ethanol-water mixtures. The improved performance is primarily attributed to the generation of oxygen vacancies (Ovac) within the TiO2 lattice. By adjusting the thermal processing parameters, the chemical state of Cu is modulated to optimize photocatalytic performance. Solid-state nuclear magnetic resonance (SSNMR) and density functional theory (DFT) calculations confirm that the presence of Ovac and hydroxyl groups (OH-) surface species not only facilitates local spatial charge separation but also enhances light absorption, thereby improving photocatalytic hydrogen evolution reaction (HER) rate up to 20.2 mmol h-1 g-1 under UV light. Furthermore, a proposed mechanism involves the participation of Ovac and OH- species, supported by Mott-Schottky (M - S) plots and ultraviolet photoelectron spectroscopy (UPS), revealing that Cu-TiO2 exhibits a lower flat band potential (Efb) and smaller work function compared to TiO2. This research underscores the pivotal role of Cu ions and Ovac:OH- in advancing the photocatalytic activity of TiO2-based crystals, imparting noteworthy implications for sustainable hydrogen generation.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Renewable platform chemicals from biomass: pathways, technologies and challenges

  • Moreira, Rui
  • Atienza Martínez, María
  • Gil-Lalaguna, Noemí
  • Bimbela Serrano, Fernando
  • Cornejo Ibergallartu, Alfonso
  • Serra, Arménio
  • Coelho, Jorge
  • Gandía Pascual, Luis
  • Arauzo, Jesús María
  • Sánchez, José Luis
The production of renewable chemicals and plastics has been extensively investigated in recent decades, with the purpose of reducing the global dependence on fossil resources. In this review, the main routes to produce chemicals from biomass are reviewed and a critical discussion on the prospects and techno-economic viability of these technologies is presented. As these topics are often considered as independent from each other, the aim of this work is to provide an unified and interdisciplinary perspective of main possible production routes and their development status for experts and non-experts. The main processes of biomass concentration were reviewed and two main approaches for obtaining renewable chemicals were considered: (i) the production of compounds chemically identical to petroleum derivatives, and (ii) the production of conventional and new oxygenated chemicals. The literature shows that there are sustainable technological alternatives to the substitution of many petroleum derived chemicals, but the complexity of the production processes should not be simplistically evaluated. Solutions and technologies must be carefully evaluated, both from the point of view of their technoeconomic viability and their sustainability., Rui Moreira would like to thank to the project agenda "From Fossil to Forest", funded by the PRR - Recovery and Resilience Program, of the Portuguese Republic, and by the Next Generation European funds (Call N.º 02/C05-i01/2022, Component 5 - Capitalization and Business Innovation-Mobilizing Agendas for Business Innovation). He also what to thank to CERES-Chemical Engineering and Renewable Resources for Sustainability Research Center, funded by Fundaçao para a Ciencia e a Tecnologia (FCT) and PRR (UID/00102/2025 and PRR UID/PRR/00102/2025, respectively). The UNIZAR team was funded by the Agencia Estatal de Investigación in Spain (Project PID2020-114936RB-I00) and Aragón Government (Research Group Ref. T22_23R) for providing frame support for this work. The UPNA team was fundend by the Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), the European Regional Development Fund (ERDF/FEDER), the European Union's NextGenerationEU funds for their financial support. In particular, this work was partially funded by the following research projects: TED2021-130846B-I00 (MULTIeFUEL project), PID2021-127265OB-C21 (SOLFUEL project), PLEC2022-009221 (Panel-to-Fuel project), PID2021-124572OB-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A prospective review on bioplastics and biopolymers

  • Moreira, Rui
  • Atienza Martínez, María
  • Gil-Lalaguna, Noemí
  • Serra, Arménio
  • Cornejo Ibergallartu, Alfonso
  • Bimbela Serrano, Fernando
  • Coelho, Jorge
  • Gandía Pascual, Luis
  • Arauzo, Jesús María
  • Sánchez, José Luis
The production of bioplastics has been extensively investigated in recent decades, with the purpose of reducing the global dependence on fossil resources. In this review, the main routes to produce bioplastics and a critical discussion of these technologies are presented. The synthesis routes to produce biodegradable and non-biodegradable bioplastics are discussed. Additionally, approaches to improve the environmental footprint of some conventional plastics that have no immediate solutions of substitution are also addressed. A comparison of the main properties of the bioplastics considered and a general perspective of the bioplastics market are also provided. Because these themes have often been reviewed separately, this article aims to provide a unified general perspective of bioplastics in the context of a biobased economy, as well as pointing out some of the hurdles in such way., The UC team and CERES - Chemical Engineering and Renewable Resources for Sustainability Research Center was funded by Fundação para a Ciência e a Tecnologia (FCT), through the base budgets (DOI: https://doi.org/10.54499/UIDB/00102/2020) and programm atic (DOI: https://doi.org/10.54499/UIDP/00102/2020). The UC team would like also to thank the COMPETE Programa Operacional Factores de Competitividade, FCT Fundação para a Ciência e Tecnologia, CEMMPRE (UID/EMS/00285/2020) and ARISE (LA/P/0112/2020). The UNIZAR team was funded by the Agencia Estatal de Investigación in Spain (Project PID2020-114936RB-I00) and Aragón Government (Research Group Ref. T22_23R) for providing frame support for this work. The UPNA team was fundend by the Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), the European Regional Development Fund (ERDF/FEDER), the European Union's NextGenerationEU funds for their financial support. In particular, this work was partially funded by the following research projects: TED2021-130846B-I00 (MULTIeFUEL project), PID2021-127265OB-C21 (SOLFUEL project), PLEC2022-009221 (Panel-toFuel project), PID2021-124572OB-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Highly selective CO formation via CO2 hydrogenation over novel ceria-based high-entropy oxides (HEOs)

  • Cortázar, María
  • Lafuente Adiego, Marta
  • Navarro Puyuelo, Andrea
  • García, Xènia
  • Llorca Piqué, Jordi
  • Reyero Zaragoza, Inés
  • Bimbela Serrano, Fernando
  • Gandía Pascual, Luis
In the present study, new ceria-based high-entropy oxides (HEOs) were investigated as CO2 hydrogenation catalysts. The nominal composition was (Ce0.5Ni0.1Co0.1Cu0.1Zn0.1Mg0.1)Ox and the synthesis was accomplished through the citrate complexing sol-gel method. Characterization techniques utilized including ICP-AES, in situ XRD and in situ XPS, SEM-EDS, HR-TEM and HAADF-STEM, Raman spectroscopy, H2-TPR, CO2-TPD and N2 physical adsorption. The physicochemical characterization and the catalytic results revealed that the conditions of the thermal treatments at which the oxides were subjected critically determined the catalytic performance, especially the CO2 hydrogenation products selectivities. Calcination in air and/or reduction in hydrogen conducted at temperatures below 500 °C led to active but poorly selective catalysts that produced both methane and CO with significant yields. This was mainly attributed to the presence of metallic Cu, Ni and Co on the catalysts that appeared to be supported on ceria doped with the rest of the formulation elements. In contrast, thermal treatments at 750 °C favored the formation of a rocksalt entropy-stabilized (NiCoCuZnMg)Ox HEO supported on ceria that has stood out for showing an excellent selectivity towards the reverse water¿gas shift (RWGS) reaction. This catalyst led to CO selectivities of almost 100 % over a very wide range of reaction temperatures (300-700 °C). Long-term stability tests (100 h) showed only a slight decrease in CO2 conversion, while CO selectivity remained stable at nearly 100 % at 400 °C. XRD characterization of the used catalysts evidenced that, whereas the basic catalyst structure remained, some metallic copper exsolved during reduction and reaction period. These results are relevant and very promising, opening a door to the development of new catalysts for the valorization of CO2 through the RWGS reaction, thus expanding the low-temperature limit at which this process can be carried out selectively., Authors wish to thank the Spanish Agencia Estatal de Investigaci´on (AEI) and Ministerio de Ciencia e Innovaci´on (MCIN), the European Regional Development Fund (ERDF/FEDER), the European Union¿s NextGenerationEU funds for their financial support. In particular, this work was partially funded by the following research projects: TED2021- 130846B-I00 (MULTIeFUEL project), PID2021-127265OB-C21 (SOLFUEL project), PLEC2022-009221 (Panel-to-Fuel project), PID2021- 124572OB-C31, and CEX2023-001300-M. M. Cortazar and M. Lafuente also thank Ministerio de Universidades (Spain) and NextGenerationEU funds for their ¨Margarita Salas¨postdoctoral grants. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program. Open access funding provided by Universidad Pública de Navarra.