Pasar al contenido principal

ELECTRODOS HIBRIDOS PARA ALMACENAMIENTO DE ENERGIA AVANZADO: HACIA UN FUTURO SOSTENIBLE

PID2020-116612RB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Xue, Qian
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Salutari, Francesco|||0000-0002-5802-8941
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Andreu, Teresa|||0000-0002-2804-4545
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Güell, Frank|||0000-0002-6528-9007
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH) pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH supply to the catalyst surface for Ni(OH) reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C-C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni species.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-modulated synthesis of vertically oriented atomic bilayer graphene nanowalls grown on stainless steel by inductively coupled plasma chemical vapour deposition

  • Bertran Serra, Enric
  • Musheghyan-Avetisyan, Arevik
  • Chaitoglou, Stefanos
  • Amade Rovira, Roger
  • Alshaikh, Islam
  • Pantoja Suárez, Fernando
  • Andújar Bella, José Luis
  • Jawhari, Tariq
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
It is now clear that growing flat graphene nanostructures from the gas phase on planar substrates is possible. One of the keys to success —particularly in producing a very large specific surface in a reduced space— is the use of 3D carbon nanostructures (i.e., vertical graphene nanowalls, VGNWs) over a planar substrate as a growth template for the deposition of electrochemically active materials (as, for example, transition metal oxides (TMO)). Vertical graphene nanowalls, also known as petal-like, vertical graphene flakes or vertical graphene, can achieve a very large specific surface area of 1100 m2/g, which is comparable to or greater than that of carbon nanotubes —the reference material for its use in high-performance supercapacitors or in other energy-related applications requiring a large active surface area. Vertical graphene nanowalls also exhibit high vertical and in-plane electrical conductivity when grown on metal electrodes, which benefits their use in electrochemical applications. Here, we focus on the growth of VGNWs on flexible stainless-steel substrates (SS310), in principle suitable for applications to electrodes of electrochemical systems (batteries, supercapacitors, catalysts), by inductively coupled plasma chemical vapour deposition (ICP-CVD), from methane as a carbon precursor, in a wide range of temperatures (575 to 900 °C). We will discuss the effect of growth temperature on morphological and structural characteristics of VGNWs based on the results of Raman spectroscopy and field emission scanning electron microscopy (FE-SEM) analysis. Because the nanostructures of graphene nanowalls reported to date are, for the most part, based on multi-layered graphene, here we seek to highlight the effect of temperature on the number of atomic layers of VGNW. In the 700–750 °C range, and under the plasma conditions explored, vertical graphene nanowalls are bilayer, which is foreseen to directly affect the magnitude of the VGNW specific surface., The authors acknowledge financial support from Grant ENE2017- 89210-C2-2-R, PID2020-116612RB-C31 and PID2020-116612RB-C32 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. The ENPHOCAMAT group acknowledges support from the AGAUR of Generalitat de Catalunya, Project No. 2017SGR1086. Two authors (A.M.-A and I.A.) acknowledge the financial supports from APIF grant from Universitat de Barcelona and from FPU grant from MEC of Spain. I.A. also acknowledges the support for a 6 months contract, as a research collaborator during the final period of his doctoral thesis, from the project entitled “Textile Competence Centre Vorarlberg 2” (TCCV2) of the program COMET-PROJECTS (Competence Centres for Excellent Technologies) of Austria. Other author (S.C.) acknowledges support from the postdoctoral fellowhips programme Beatriu de Pinós, funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No 801370 (H2020-MSCA-COFUND-2017)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Qi, Xueqiang
  • Xue, Qian
  • Chacón-Borrero, Jesús
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Andreu, Teresa
  • Salazar-Álvarez, G.
  • Güell, F.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH)<inf>2</inf> pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH<sup>−</sup> supply to the catalyst surface for Ni(OH)<inf>2</inf> reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C−C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO<inf>2</inf> facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni<sup>3+</sup> species., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors acknowledge funding from project PID2020-116612RB-C32, PID2022-138491OB-C33, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 European Union NextGenerationEU/PRTR. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. This study is part of the Advanced Materials program and In-CAEM project, supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. This work is in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.40 IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. ICN2 thank the support from project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 acknowledge the support from the Severo Ochoa Programme (MINECO, grant no. CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical graphene nanowalls/Ti, Mo-MXene nano compounds for enhanced electrocatalytic hydrogen evolution

  • Serafin, Jarosław
  • Farid, Ghulam
  • Chaitoglou, Stefanos
  • Majumdar, Shubhadeep
  • Ma, Yang
  • Vendrell, Xavier
  • Sánchez, Adrià
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
  • Bertran-Serra, Enric
  • Homs, Narcis
  • Amade Rovira, Roger
In this study, hybrid Ti<inf>3</inf>C<inf>2</inf>T<inf>x</inf> and Mo<inf>3</inf>C<inf>2</inf>T<inf>x</inf> MXene nanosheets integrated with graphene nanowalls (GNWs) were synthesized using chemical vapor deposition (CVD) and thoroughly characterized for their electrocatalytic performance in the hydrogen evolution reaction (HER). Comprehensive characterization techniques, including X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) surface area analysis, and X-ray photoelectron spectroscopy (XPS), were employed to evaluate the structure, surface chemistry, and morphology of the composites. XPS analysis confirmed the successful removal of aluminum from the MAX phase, alongside the introduction of functional groups such as oxygen and fluorine, which are critical for enhancing HER efficiency. The GNWs/Mo<inf>3</inf>C<inf>2</inf>T<inf>x</inf>-MXene composite exhibited the lowest overpotential of 132 mV at 10 mA/cm<sup>2</sup>, significantly outperforming its pristine MAX and MXene counterparts. The Tafel slope for GNWs/Mo<inf>3</inf>C<inf>2</inf>T<inf>x</inf>-MXene was reduced to 178 mV/dec, compared to Mo-MXene (245 mV/dec), indicating improved reaction kinetics. The GNWs/Ti<inf>3</inf>C<inf>2</inf>T<inf>x</inf>-MXene composite demonstrated an overpotential of 359 mV and a Tafel slope of 242 mV/dec. Furthermore, Nyquist plots revealed low charge transfer resistance (R<inf>ct</inf>) for both composites, correlating with enhanced electron transport. The composites also exhibited superior BET surface area and porosity, crucial for catalytic activity. These findings underscore the potential of GNWs/MXene hybrids as scalable, cost-effective alternatives to noble metal catalysts for HER., he publication of this article is funded by Grant PID2020-116612RB-C32 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union” or by the “European Union Next Generation EU/PRTR. The authors acknowledge “Textile Competence Center Vorarlberg 2” (TCCV2 Project FFG 882502) funded within COMET – Competence Centres for Excellent Technologies – by the Federal Ministry for Climate Protection, Environment, Energy, Mobility, Innovation and Technology (BMK) and the Federal Ministry for Digitization and Business Location (BMDW), with co-financing from the federal province of Vorarlberg. The COMET program is managed by the Austrian Research Promotion Agency (FFG). The authors acknowledge financial support from projects PID2020-116612RB-C32, PDC2021-121868-C22, TED2021-132070B–C21, TED2021-131442B–C33 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union Next Generation EU/PRTR”. The authors also acknowledge financial support from project 2023 CLIMA 00009 funded by the Department of Research and Universities: of the Department of Climate Action, Food and Rural Agenda; and the Climate Fund of the Generalitat de Catalunya. The ENPHOCAMAT group acknowledges support from the AGAUR of Generalitat de Catalunya, Project No. 2021SGR00936. One author (G.F.) acknowledges the support from the predoctoral fellowship PREDOCS-UB (APIF) funded by the MICINN of Spanish Government. Another author (J.S.) is grateful for the financial support provided by the Generalitat de Catalunya through the AGAUR grant for Project No. 2023 CLIMA 00009. Another author (S.C.) acknowledges support from the MSCA Fellowship funded by the European Commission through Grant Agreement 101062014 (HORIZON Europe-MSCA-2021-PF-01). Another author (S.M.) acknowledges support by a contract from the project TCCV2. Another author (Y.M.) acknowledges the support from the predoctoral fellowship funded by the Chinese Scientific Fellowship programme of the Chinese Government. Another author (A.S) acknowledges the support from the MICIN and FSE+ for the PhD grant PRE2021-098422. The authors also acknowledge CCiT-UB for their help in materials characterization measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed