Pasar al contenido principal

FOTOELECTRODOS HIBRIDOS PARA LA CO-VALORIZACION DEL CO2 Y GLICEROL

PID2022-138491OB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Xue, Qian
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Salutari, Francesco|||0000-0002-5802-8941
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Andreu, Teresa|||0000-0002-2804-4545
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Güell, Frank|||0000-0002-6528-9007
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH) pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH supply to the catalyst surface for Ni(OH) reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C-C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Gold-Indium Electrocatalysts for the Selective Oxidation of Glycerol Coupled with CO2 Reduction

  • Molera, Martí
  • Fernández-Caso, Kevin
  • Amazian, Mohamed
  • Díaz-Sainz, Guillermo
  • Solla-Gullón, José
  • Álvarez-Guerra, Manuel
  • Sarret, Maria
  • Andreu, Teresa
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Glycerol electrooxidation is a promising alternative to the oxygen evolution reaction in carbon dioxide electroreduction processes. It has the potential to both reduce the overall cell voltage and enable the commercialization of anodic oxidation products. Gold is a material that exhibits a high performance for glycerol oxidation but has a high manufacturing cost. In this work we have synthesized a gold indium alloy that exhibits enhanced electrocatalytically properties, as evidenced by a reduction in the glycerol oxidation onset potential by 210 mV while reducing the electrode cost by 28%. This electrocatalyst has been evaluated in a flow cell configuration coupled with the cathodic reduction of carbon dioxide, and high faradaic efficiencies up to 90% have been achieved for both the anodic and cathodic products.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrodeposited BiVO4-based photoanodes for an energy-efficient photo-assisted CO2-to-formate conversion

  • Abarca, Jose Antonio
  • Molera, Martí
  • Merino-Garcia, Ivan
  • Díaz-Sainz, Guillermo
  • Irabien, Ángel
  • Solla-Gullón, José
  • Fàbrega, Cristian
  • Andreu, Teresa
  • Albo, Jonathan
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The development of efficient photoanodes that reduce external energy requirements for the electrochemical conversion of CO2 to formate is essential for the future implementation of this technology. In this work, we explore different photoanode structures based on electrodeposited BiVO4 onto transparent FTO substrates to achieve a more efficient PEC reduction of CO2. Among the tested structures, the photoanode incorporating a Bi2O3 underlayer, which enhances the BiVO4-FTO interface by reducing electron-hole recombination, exhibits the best PEC performance. Integrating this photoanode into a CO2 photoelectrolyzer with back visible light illumination achieves an impressive current density of −29 mA cm−2 at constant −1.8 V (vs. Ag/AgCl). Using a Bi/C GDE as the cathode, the system produces up to 56.2 g L−1 of formate with a Faradaic efficiency of 96 %. In terms of energy performance, illuminating the photoanode reduces energy consumption by nearly 40 %, bringing it down to 317 kWh kmol−1, with an energy efficiency of 38 %. The external bias can be further decreased by increasing the irradiation intensity to 2.5 suns using concentrated solar light, resulting in an additional 10 % reduction in energy consumption (290 kWh kmol−1), while maintaining high conversion efficiencies for CO2 to formate (over 95 % Faradaic efficiency). Besides, energy efficiency improves by 12 %, as the cathodic potential is reduced to −1.65 V (vs. Ag/AgCl). These results represent significant progress in reducing the external bias required for CO2 to formate conversion in PEC systems, marking a step toward the industrial application of CO2 conversion technology.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Qi, Xueqiang
  • Xue, Qian
  • Chacón-Borrero, Jesús
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Andreu, Teresa
  • Salazar-Álvarez, G.
  • Güell, F.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH)<inf>2</inf> pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH<sup>−</sup> supply to the catalyst surface for Ni(OH)<inf>2</inf> reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C−C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO<inf>2</inf> facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni<sup>3+</sup> species., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors acknowledge funding from project PID2020-116612RB-C32, PID2022-138491OB-C33, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 European Union NextGenerationEU/PRTR. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. This study is part of the Advanced Materials program and In-CAEM project, supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. This work is in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.40 IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. ICN2 thank the support from project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 acknowledge the support from the Severo Ochoa Programme (MINECO, grant no. CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed