Pasar al contenido principal

REACTORES (FOTO)ELECTROCATALITICOS AVANZADOS PARA LA VALORIZACION ACOPLADA DE CO2 Y GLICEROL

PID2022-138491OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Advances in the development of innovative Bi-Sn-Sb-based Gas Diffusion Electrodes for continuous CO2 electroreduction to formate

  • Díaz-Sainz, Guillermo
  • Fernández-Caso, Kevin
  • Avila-Bolivar, Beatriz
  • Montiel, Vicente
  • Solla-Gullón, José
  • Alvarez-Guerra, Manuel
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrocatalytic reduction of CO2 to formate or formic acid represents a promising approach to mitigating CO2 emissions. Despite progress with Bi and Sn-based cathodes, there remains a demand for new electrocatalytic materials with enhanced activity for industrial-scale implementation. In a recent contribution, carbon-supported Bi-Sn-Sb nanoparticles with different atomic ratios were prepared and evaluated for the electrocatalytic reduction of CO2 to formate, assessing their performance in terms of activity, selectivity, and stability under working conditions in an H-type cell. Under this electrochemical reactor configuration, the results clearly indicated that the incorporation of small amounts of Sb and Sn into Bi significantly enhanced stability without substantially affecting activity and selectivity, achieving promising results with Bi80Sn10Sb10 electrocatalysts. Here, we report the use of Bi-Sn-Sb-based Gas Diffusion Electrodes (GDEs) in a flow electrochemical reactor for the electrocatalytic reduction of CO2 to formate. The study also aims to rigorously compare the performance of Bi-Sn-Sb GDEs with that of analogous GDEs based solely on Bi or Sn. When compared to relevant references, the Bi-Sn-Sb catalyst demonstrates performance metrics that reflect comparable system efficiency to the Bi and Sn cathodes previously used by our research group, operating at current densities up to 200 mA·cm−2 and achieving formate concentrations of approximately 15 g·L−1. Furthermore, these materials exhibited technical feasibility, remaining stable throughout the 5-hour experiment with less than a 10 % decrease in concentration. This stability marks a vital first step toward the future implementation of this type of cathode in the electrochemical reduction of CO₂ to formate.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Coupling Ni-based anodes for textile industry process stream electrooxidation with electrocatalytic CO2 reduction to formate in gas phase

  • Abarca, Jose Antonio
  • Abdolhosseini, Ghazaleh
  • Sanz, Juan Marcos
  • Solla-Gullón, José
  • Garcés-Pineda, Felipe A.
  • Díaz-Sainz, Guillermo
  • Irabien, Ángel
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Scaling up CO2 electroreduction to formate faces several challenges, including using chemicals as electrolytes and high energy demands. To address these issues, this study uses an industrial stream—specifically a caustic soda stream from the textile industry—as anolytes for the oxygen evolution reaction (OER). Using this approach, formate concentrations of 226 g L⁻¹ and Faradaic efficiencies (FE) of 53 % are achieved at 200 mA cm⁻², demonstrating the competitiveness of industrial streams compared to synthetic anolyte solutions. Various anode materials are tested to optimize OER kinetics under industrial conditions and reduce energy consumption. Ni foam exhibited promising results, achieving FEs of 78 % and 58 % at 90 and 200 mA cm⁻², with energy consumption between 236 and 385 kWh kmol⁻¹ , making it one of the most efficient options among commercially available materials. In addition, alternative materials, such as NiFeOx and NiZnFeOx particulate anodes, are synthesized to provide viable substitutes for commercial anodes that rely on scarce elements. These alternatives demonstrated similar formate concentrations, with FEs up to 74 % and reduced energy requirements compared to commercial NiO. The synthesized NiFe foam anode excelled in performance, with energy consumption below 210 and 380 kWh kmol⁻¹ and an impressive formate production of 255 g L−1 of formate achieving a 60 % FE at 200 mA cm−2. Overall, this research demonstrates the feasibility of CO₂ electroreduction to formate using textile effluents under relevant conditions, representing a significant step toward making this process a competitive option for decarbonizing hard-to-abate industries.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Gold-Indium Electrocatalysts for the Selective Oxidation of Glycerol Coupled with CO2 Reduction

  • Molera, Martí
  • Fernández-Caso, Kevin
  • Amazian, Mohamed
  • Díaz-Sainz, Guillermo
  • Solla-Gullón, José
  • Álvarez-Guerra, Manuel
  • Sarret, Maria
  • Andreu, Teresa
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Glycerol electrooxidation is a promising alternative to the oxygen evolution reaction in carbon dioxide electroreduction processes. It has the potential to both reduce the overall cell voltage and enable the commercialization of anodic oxidation products. Gold is a material that exhibits a high performance for glycerol oxidation but has a high manufacturing cost. In this work we have synthesized a gold indium alloy that exhibits enhanced electrocatalytically properties, as evidenced by a reduction in the glycerol oxidation onset potential by 210 mV while reducing the electrode cost by 28%. This electrocatalyst has been evaluated in a flow cell configuration coupled with the cathodic reduction of carbon dioxide, and high faradaic efficiencies up to 90% have been achieved for both the anodic and cathodic products.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Magnetically enhanced electrochemical conversion of CO2 to formate: Experimental studies

  • Abarca, Jose Antonio
  • Wu, Xian
  • González-Fernández, Cristina
  • Karampelas, Ioannis H.
  • Gutierrez-Carballo, Alejandro
  • Gauthier, Joseph A.
  • Botte, Gerardine G.
  • Solla-Gullón, José
  • Díaz-Sainz, Guillermo
  • Irabien, Ángel
  • Gomez-Pastora, Jenifer
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The application of external magnetic fields in electrochemical processes has emerged as a promising strategy to enhance efficiency. Nevertheless, the use of magnetic fields in electrochemical CO2 reduction (ERCO2) has been scarcely explored. This study evaluates the impact of magnetic fields on ERCO2 to formate in a filter-press reactor, combining experimental analysis with magnetic field modeling to understand the performance enhancements achieved by placing magnets outside the electrochemical cell. Magnetic field modeling reveals that the positioning of magnets relative to the cathode surface significantly affects the field strength. For instance, placing a magnet near the anode generates a field strength of 20 mT on the GDE, while positioning two magnets at opposite ends of the cell increases the field to 400 mT. Experimentally, placing magnets near the cathode or at both ends of the cell boosts formate concentration by more than 20 %, achieving values of 4.4 g L−1 and 4.95 g L−1, respectively, with FEs approaching 100 %. These improvements are attributed to the magnetohydrodynamic (MHD) effect, which enhances mass transfer by inducing turbulence in the cathodic electrolyte. This effect is particularly important at low catholyte flow rates, leading to a more than 50 % increase in formate concentration, reaching up to 27.25 g L−1 at a flow rate of 0.07 mL min−1 cm−2. However, the application of magnetic fields also increases energy consumption due to the higher cell voltage requirements, as indicated by Tafel analysis. Despite this limitation, this study demonstrates the potential application of magnetic fields to enhance ERCO2 processes, paving the way for future research to further explore and optimize this promising strategy.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing the full energy efficiency of CO2 and glycerol co-valorisation using Ni/Co-decorated BiVO4-based multilayered photoanodes

  • Crespo Alvarez, Sara
  • Merino-Garcia, Ivan
  • Bujedo-Saiz, Elena
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
  • Albo, Jonathan
Photoelectrochemical (PEC) systems offer a promising solar-driven approach to address the high energy demand of the oxygen evolution reaction (OER), which often limits conventional electrochemical reduction of CO2 to value-added products. In this context, replacing the anodic OER with the glycerol oxidation reaction (GOR) has emerged as an effective strategy to enhance the full energy efficiency (FEE) of PEC CO2 conversion systems, while enabling the simultaneous valorisation of biomass-derived feedstocks. In this work, advanced multilayered BiVO4/WO3/CaTiO3 (CWB) photoanodes decorated with Ni, Co, and Ni–Co nanoparticles are fabricated and applied to promote energy-efficient CO2 reduction to formate (HCOO-) coupled with glycerol photoelectrooxidation. The results show that the Ni-decorated photoanode (CWBNi) achieves a maximum HCOO- production rate of 2200 µmol m−2 s−1, with a cathodic Faradaic efficiency of 94.3%. Simultaneously, the GOR yields dihydroxyacetone (DHA), at a production rate of 184.8 µmol m−2 s−1, along with glyceraldehyde (GLAD) and acetate (CH3COO-) as the major oxidation products, at a current density of 45 mA cm−2 under visible light illumination (1 sun). Overall, a maximum FEE of 60% is achieved with the CWBNi photoanode, outperforming both the Ni/Co (50:50) and Co-based counterparts. These findings highlight the critical role of photoanode composition and architecture to enhance both FEE and operational stability in the simultaneous co-production of value-added chemicals.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrodeposited BiVO4-based photoanodes for an energy-efficient photo-assisted CO2-to-formate conversion

  • Abarca, Jose Antonio
  • Molera, Martí
  • Merino-Garcia, Ivan
  • Díaz-Sainz, Guillermo
  • Irabien, Ángel
  • Solla-Gullón, José
  • Fàbrega, Cristian
  • Andreu, Teresa
  • Albo, Jonathan
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The development of efficient photoanodes that reduce external energy requirements for the electrochemical conversion of CO2 to formate is essential for the future implementation of this technology. In this work, we explore different photoanode structures based on electrodeposited BiVO4 onto transparent FTO substrates to achieve a more efficient PEC reduction of CO2. Among the tested structures, the photoanode incorporating a Bi2O3 underlayer, which enhances the BiVO4-FTO interface by reducing electron-hole recombination, exhibits the best PEC performance. Integrating this photoanode into a CO2 photoelectrolyzer with back visible light illumination achieves an impressive current density of −29 mA cm−2 at constant −1.8 V (vs. Ag/AgCl). Using a Bi/C GDE as the cathode, the system produces up to 56.2 g L−1 of formate with a Faradaic efficiency of 96 %. In terms of energy performance, illuminating the photoanode reduces energy consumption by nearly 40 %, bringing it down to 317 kWh kmol−1, with an energy efficiency of 38 %. The external bias can be further decreased by increasing the irradiation intensity to 2.5 suns using concentrated solar light, resulting in an additional 10 % reduction in energy consumption (290 kWh kmol−1), while maintaining high conversion efficiencies for CO2 to formate (over 95 % Faradaic efficiency). Besides, energy efficiency improves by 12 %, as the cathodic potential is reduced to −1.65 V (vs. Ag/AgCl). These results represent significant progress in reducing the external bias required for CO2 to formate conversion in PEC systems, marking a step toward the industrial application of CO2 conversion technology.