Pasar al contenido principal

FUNCIONALIZACION AVANZADA DE NANOMATERIALES DE CARBONO MEDIANTE RADIACION LASER DE ALTA INTENSIDAD

PID2020-116612RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser processing of graphene and related materials for energy storage: State of the art and future prospects

  • Kumar, Rajesh
  • Pérez del Pino, Ángel
  • Sahoo, Sumanta
  • Singh, Rajesh Kumar
  • Tan, Wai Kian
  • Kar, Kamal K.
  • Matsuda, Atsunori
  • Joanni, Ednan
Laser-based methodologies for synthesis, reduction, modification and assembly of graphene-based materials are highly demanded for energy-related electrodes and devices for portable electronics. Laser technologies for graphene synthesis and modification exhibit several advantages when compared to alternative methods. They are fast, low-cost and energy saving, allowing selective heating and programmable processing, with controlled manipulation over the main experimental parameters. In this review, we summarize the most recent studies on laser-assisted synthesis of graphene-based materials, as well as their modification and application as electrodes for supercapacitor and battery applications. After a brief introduction to the physical properties of graphene and a discussion of the different types of laser processing operations, the practical uses of laser techniques for the fabrication of electrode materials are discussed in detail. Finally, the review is concluded with a brief discussion of some of the outstanding problems and possible directions for research in the area of laser-based graphene materials for energy storage devices., This research was supported by the financial assistance from the Science and Engineering Research Board (SERB), Department of Science & Technology (DST), New Delhi under Ramanujan Fellowship Award (SB/S2/RJN-159/2017) and JSPS KAKENHI Grant JP-18F18063. The author (A.P. Pino) thanks the financial support of MCIN/AEI/ 10.13039/501100011033 under the project PID2020-116612RB-C31 and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. ICMAB acknowledges financial support from MCIN/AEI/ 10.13039/501100011033, through Severo Ochoa FUNFUTURE grant (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the origin of the capacitance in nanostructured nitrogen-doped carbon - NiO hybrid electrodes deposited with laser

  • García Lebière, Pablo
  • Gyorgy, Eniko
  • Logofatu, Constantin
  • Naumenko, Denys
  • Amenitsch, Heinz
  • Rajak, Piu
  • Ciancio, Regina
  • Pérez del Pino, Ángel
The full knowledge of the charge storage mechanisms occurring in complex composite electrodes is key for the straightforward development of advanced electrochemical capacitors. In this work, hybrid electrodes composed of reduced graphene oxide, multiwall carbon nanotubes and NiO nanostructures were fabricated through reactive inverse matrix assisted pulsed laser evaporation technique. Nitrogen doping of the carbon nanostructures was carried out by introducing ammonia, urea and melamine precursors in the target. The N-doped graphene electrodes exhibited a significant capacitance enhancement as compared to non-doped ones. This fact is commonly ascribed to faradaic mechanisms. However, our structural-compositional studies point to a significant change of the structural configuration of the composites at the nanoscale upon the nitrogen functionalization as the source of the electrodes’ capacitance enhancement. The composites fabricated with urea precursor exhibited the highest capacitance, and this fact was associated with the presence of pyridinic N groups that triggered the formation of a high amount of structural defects (vacancies – boundaries) and microporosity, not observed in the samples synthesized with other precursors that mainly contained pyrrolic-graphitic N., The authors are grateful for the financial support of MCIN/AEI/10.13039/501100011033 under the project PID2020-116612RB-C31 and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. ICMAB acknowledges financial support from MCIN/AEI/10.13039/501100011033, through Severo Ochoa FUNFUTURE grant (CEX2019-000917-S). This project also received funding from the EU-H2020 research and innovation programme under the grant agreement No 654360 having benefited from the access provided by the Graz University of Technology and the Consiglio Nazionale delle Ricerche– Istituto Officina dei Materiali in Elettra-Sincrotrone Trieste (SAXS), and TEM and Raman spectroscopy installations, respectively, within the framework of the NFFA-Europe Transnational Access Activity (project ID 912). P.G.L thanks the financial support of the Spanish Ministry of Economy, Industry and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. PR acknowledges the receipt of a fellowship from the ICTP Programme for Training and Research in Italian Laboratories, Trieste, Italy. The authors acknowledge Marco Lazzarino for acquiring the Raman spectra within the NFFA collaboration, as well as support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-modulated synthesis of vertically oriented atomic bilayer graphene nanowalls grown on stainless steel by inductively coupled plasma chemical vapour deposition

  • Bertran Serra, Enric
  • Musheghyan-Avetisyan, Arevik
  • Chaitoglou, Stefanos
  • Amade Rovira, Roger
  • Alshaikh, Islam
  • Pantoja Suárez, Fernando
  • Andújar Bella, José Luis
  • Jawhari, Tariq
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
It is now clear that growing flat graphene nanostructures from the gas phase on planar substrates is possible. One of the keys to success —particularly in producing a very large specific surface in a reduced space— is the use of 3D carbon nanostructures (i.e., vertical graphene nanowalls, VGNWs) over a planar substrate as a growth template for the deposition of electrochemically active materials (as, for example, transition metal oxides (TMO)). Vertical graphene nanowalls, also known as petal-like, vertical graphene flakes or vertical graphene, can achieve a very large specific surface area of 1100 m2/g, which is comparable to or greater than that of carbon nanotubes —the reference material for its use in high-performance supercapacitors or in other energy-related applications requiring a large active surface area. Vertical graphene nanowalls also exhibit high vertical and in-plane electrical conductivity when grown on metal electrodes, which benefits their use in electrochemical applications. Here, we focus on the growth of VGNWs on flexible stainless-steel substrates (SS310), in principle suitable for applications to electrodes of electrochemical systems (batteries, supercapacitors, catalysts), by inductively coupled plasma chemical vapour deposition (ICP-CVD), from methane as a carbon precursor, in a wide range of temperatures (575 to 900 °C). We will discuss the effect of growth temperature on morphological and structural characteristics of VGNWs based on the results of Raman spectroscopy and field emission scanning electron microscopy (FE-SEM) analysis. Because the nanostructures of graphene nanowalls reported to date are, for the most part, based on multi-layered graphene, here we seek to highlight the effect of temperature on the number of atomic layers of VGNW. In the 700–750 °C range, and under the plasma conditions explored, vertical graphene nanowalls are bilayer, which is foreseen to directly affect the magnitude of the VGNW specific surface., The authors acknowledge financial support from Grant ENE2017- 89210-C2-2-R, PID2020-116612RB-C31 and PID2020-116612RB-C32 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. The ENPHOCAMAT group acknowledges support from the AGAUR of Generalitat de Catalunya, Project No. 2017SGR1086. Two authors (A.M.-A and I.A.) acknowledge the financial supports from APIF grant from Universitat de Barcelona and from FPU grant from MEC of Spain. I.A. also acknowledges the support for a 6 months contract, as a research collaborator during the final period of his doctoral thesis, from the project entitled “Textile Competence Centre Vorarlberg 2” (TCCV2) of the program COMET-PROJECTS (Competence Centres for Excellent Technologies) of Austria. Other author (S.C.) acknowledges support from the postdoctoral fellowhips programme Beatriu de Pinós, funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No 801370 (H2020-MSCA-COFUND-2017)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iron oxide/hydroxide-nitrogen doped graphene-like visible-light active photocatalytic layers for antibiotics removal from wastewater

  • Ivan, Raluca
  • Popescu,
  • Antohe, V A
  • Antohe, Stefan
  • Negrila, Catalin
  • Logofatu, Constantin
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
Hybrid layers consisting of Fe oxide, Fe hydroxide, and nitrogen doped graphene-like platelets have been synthesized by an eco-friendly laser-based method for photocatalytic applications. The complex composite layers show high photodecomposition efficiency towards degradation of antibiotic molecules under visible light irradiation. The photodecomposition efficiency was investigated as a function of relative concentrations of base materials, Fe oxide nanoparticles and graphene oxide platelets used for the preparation of target dispersions submitted to laser irradiation. Although reference pure Fe oxide/Fe hydroxide layers have high absorption in the visible spectral region, their photodecomposition efficiency is negligible under the same irradiation conditions. The high photocatalytic decomposition efficiency of the nanohybrid layer, up to 80% of the initial antibiotic molecules was assigned to synergistic effects between the constituent materials, efficient separation of the electron-hole pairs generated by visible light irradiation on the surface of Fe oxide and Fe hydroxide nanoparticles, in the presence of conducting graphene-like platelets. Nitrogen doped graphene-like platelets contribute also to the generation of electron-hole pairs under visible light irradiation, as demonstrated by the photocatalytic activity of pure, reference nitrogen doped graphene-like layers. The results also showed that adsorption processes do not contribute significantly to the removal of antibiotic molecules from the test solutions. The decrease of the antibiotic concentration under visible light irradiation was assigned primarily to photocatalytic decomposition mechanisms., The authors are grateful for the financial support of the Spanish Ministry of Science and Innovation MCIN/AEI/https://doi.org/10.13039/501100011033 under the project PID2020-116612RB-C31, Generalitat de Catalunya, AGAUR through the projects 2017 SGR 1086 and 2017 SGR 1771, and the Romanian Ministry of Education and Scientific Research, UEFISCDI under the contract PN-III-P4-ID-PCE-2020-2024. ICMAB acknowledges the financial support from MCIN/AEI/https://doi.org/10.13039/501100011033, through the Severo Ochoa FUNFUTURE grant (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boron and nitrogen co-doped carbon-based nanomaterials/nickel oxide/hydroxide hybrids for sunlight induced photocatalytic water cleaning

  • García Lebière, Pablo
  • Ivan, Raluca
  • Pérez del Pino, Ángel
  • Logofatu, Constantin
  • Negrila, Constantin Cătălin
  • Gyorgy, Eniko
B doped as well as B and N co-doped highly reduced graphene oxide and multiwall carbon nanotubes/Ni oxide and Ni hydroxide nanohybrid layers were synthesized using a one-step laser technique. NiO nanoparticles, graphene oxide platelets, and multiwall carbon nanotubes were used as starting materials for the preparation of the composite layers. H3BO3 was used as B precursor and urea as well as NH3 as N precursors for B and N co-doping of the composite layers. The influence of the nature and concentration of the B and N precursors on the physico-chemical properties of the nanohybrid layers, chemical composition and chemical bonding states, crystalline structure, as well as charge transfer properties was systematically investigated. The relation between the physico-chemical properties and functional characteristics of the nanohybrid layers, photocatalytic removal of water contaminants under simulated sun irradiation conditions was studied, identifying the optimum concentrations of the dopant precursor materials. The mechanism of the photodegradation process was explored, based of the band structure of the composites. The main intermediates, reactive oxygen species implied in the photocatalytic degradation processes of organic molecules, was investigated through the addition of scavengers to the organic dye test solutions. The highest photocatalytic activities were achieved for B and N co-doped samples synthesised using H3BO3 as B and urea as N precursors., The authors thank the financial support of the Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI) of the Romanian Ministry of Education and Scientific Research under the Contract PN-III-P4-ID-PCE-2020-2024, the Spanish Ministry of Science and Innovation under the Project PID2020-116612RB-C31, AEI/FEDER, EU, and “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional enhancement of laser deposited carbon-based supercapacitor electrodes upon post-annealing treatment

  • Pérez del Pino, Angel
  • García Lebière, Pablo
  • Mestra, Alifhers
  • Gyorgy, Eniko
  • García López, Carlos
  • Bacsa, Wolfgang
  • Logofatu, Constantin
The development of new synthetic methods is paramount for the versatile production of complex multicomponent electrodes for supercapacitors with enhanced performance. The reactive inverse matrix assisted pulsed laser evaporation (RIMAPLE) technique shows promise for the deposition of complex functional nanocomposites in a facile way. In this work, hybrid supercapacitor electrodes constituted by reduced graphene oxide (rGO) and carbon nanotubes (CNTs) decorated with a myriad of cerium and manganese oxide nanoparticles were obtained by using GO sheets, CNTs, CeO2 nanoparticles and, for the first time, the (NH4)2[Mn2(C6H5O7)2(H2O)2] coordination compound as precursors in the RIMAPLE targets. Compositional and structural characterizations revealed that post-annealing treatments at mild conditions (150-250 °C) induce a further reduction of the rGO and CNTs, besides an oxidation of the Ce oxide phases (Ce3+ to Ce4+) and a reduction of the Mn oxides (Mn3+ to Mn2+). The substantial change of the carbon and metal oxide nanostructures causes an up to 8-fold increase of the capacitance of the electrodes (63 F/cm3 @ 10 mV/s). Finally, the generation of a high quantity of edge defects at 250 °C and long dwell time leads to the drop of the electrode's capacitance., The authors thank the financial support of the Spanish Ministry of Science and Innovation (MCIN/AEI/https://doi.org/10.13039/501100011033) under the project PID2020-116612RB-C31 and support from AGAUR of Generalitat de Catalunya through projects 2022 SGR 0936. PGL thanks the financial support of the Spanish Ministry of Economy, Industry and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers). ICMAB acknowledges financial support from the Spanish Ministry of Science and Innovation, through Severo Ochoa FUNFUTURE (CEX2019-000917-S). This work was also supported by the grant NanoX no. ANR-17-EURE0009 in the framework of the ‘Programme des Investissements d’Avenir’, France., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave post-treated activated carbons for capacitance boosted non-aqueous supercapacitors

  • Fasahat, Shima
  • Khosravi, Mohsen
  • Dini, Ghasem
  • Pérez del Pino, Ángel
  • Logofatu, Constantin
Herein, as a novel idea, a microwave (MW) post-treatment strategy is proposed to modify the structure and surface characteristics of already prepared activated carbons (ACs) for application in non-aqueous Electric Double-Layer Capacitors. Pistachio nutshell-derived carbon is first KOH-activated and then subjected to MW irradiation for 0, 2, 5, and 10 minutes. X-ray Diffraction and Raman analyses show that MW post-treatment leads to structural modifications, and FTIR and XPS analyses reveal relative elimination of surface functional groups which results in subsequent enhancement in water contact angle and renders more favorable surface wetting of carbon by non-aqueous organic electrolyte. The performance characteristics of symmetrical non-aqueous supercapacitors incorporated with the prepared ACs show a significant positive effect of MW irradiation in such a way that 0 and 10-minute-irradiated ACs demonstrate 152 and 392 F g−1 capacities, respectively, at 1.75 A g−1, with the corresponding specific energies and powers of 340 Wh kg−1 and 11 kW kg−1 for AC-10, respectively. This remarkable enhancement in the electrochemical performance is attributed to the effective role of the MW post-treatment in modifying the AC structure as well as providing AC surfaces that have better wettability with less polar non-aqueous electrolyte. Moreover, this strategy is additionally applicable to make hydrophobic activated carbons for other applications as the absorption of less polar contaminants from liquid or gaseous environments., The authors would like to thank the following institutions for their support and collaboration in this research effort: The University of Isfahan to provide facilities for the synthesis of AC-Xs fabricating electrodes, and providing supercapacitor cell; the Institute of Materials Science of Barcelona (ICMAB) for providing facilities regarding using glove box to assemble the supercapacitor cells and doing the final electrochemical analysis and the authors are grateful for the financial support of the Spanish Ministry of Science and Innovation under the project PID2020-116612RB-C31, and support from AGAUR of Generalitat de Catalunya through project 2017 SGR 1086. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (CEX2019-000917-S); and the National Institute of Materials Physics of Bucharest for the collaboration in performing XPS analysis., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed