Pasar al contenido principal

DESARROLLO DE COMPUESTOS MIXTOS CALCOGENUROS-HALUROS DE BAJA DIMENSION POR RUTAS FISICAS PARA APLICACIONES EN DISPOSITIVOS FOTOVOLTAICOS TANDEM

PID2020-116719RB-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SbSeI and SbSeBr micro-columnar solar cells by a novel high pressure-based synthesis process

  • Caño, Ivan
  • Navarro Güell, Alejandro
  • Maggi, Edoardo
  • Barrio, Maria
  • Tamarit, Josep Lluís
  • Svatek, Simon
  • Antolín, Elisa
  • Yan, Shunya
  • Barrena, Esther
  • Galiana, Beatriz
  • Placidi, Marcel
  • Puigdollers, Joaquim
  • Saucedo, Edgardo
Van der Waals chalcogenides and chalcohalides have the potential to become the next thin film PV breakthrough, owing to the earth-abundancy and non-toxicity of their components, and their stability, high absorption coefficient and quasi-1D structure, which leads to enhanced electrical anisotropic properties when the material is oriented in a specific crystalline direction. However, quasi-1D semiconductors beyond Sb2(S,Se)3, such as SbSeX chalcohalides, have been scarcely investigated for energy generation applications, and rarely synthesised by physical vapor deposition methodologies, despite holding the promise of widening the bandgap range (opening the door to tandem or semi-transparent devices), and showing enticing new properties such as ferroelectric behaviour and defect-tolerant nature. In this work, SbSeI and SbSeBr micro-columnar solar cells have been obtained for the first time by an innovative methodology based on the selective halogenation of Sb2Se3 thin films at pressure above 1 atm. It is shown that by increasing the annealing temperature and pressure, the height and density of the micro-columnar structures grows monotonically, resulting in SbSeI single-crystal columns up to 30 μm, and tuneable morphology. In addition, solar cell prototypes with substrate configuration have shown remarkable Voc values above 550 mV and 1.8 eV bandgap., This research has received funding from the European Union H2020 Framework Program under through the SENSATE project: Low dimensional semiconductors for optically tunable solar harvesters (grant agreement number 866018). Other funding from the Ministry of Science and Innovation of the Government of Spain under the MATER-ONE (PID2020- 116719RB-C41) and MIRACLE projects. I. C. acknowledges UPC and Banco Santander for his FPI-UPC PhD scholarship. A. N. acknowledges the acknowledges the Ministry of Science and Innovation for his FPI PhD scholarship. E. B. acknowledges node DME (Cadiz, Spain) of ICTS “ELECMI”. M. P. acknowledges the nancial support from Ministry of Science and Innovation within the Ramon y Cajal program (RYC-2017- 23758). E. S. acknowledges the ICREA Academia program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

KCN Chemical Etching of van der Waals Sb2Se3 Thin Films Synthesized at Low Temperature Leads to Inverted Surface Polarity and Improved Solar Cell Efficiency

  • Jiménez Guerra, Maykel
  • Calvo Barrio, Lorenzo
  • Asensi, José Miguel
  • Caño Prades, Iván
  • Yan, Shunya
  • Barrena, Esther
  • Puigdollers, Joaquim
  • Jehl, Zacharie
  • Sánchez, Yudania
  • Saucedo, Edgardo
Recent developments in Sb2Se3 van der Waals material as an absorber candidate for thin film photovoltaic applications have demonstrated the importance of surface management for improving the conversion efficiency of this technology. Sb2Se3 thin films' versatility in delivering good efficiencies in both superstrate and substrate configurations, coupled with a compatibility with various low-temperature deposition techniques (below 500 °C and often below 350 °C), makes them highly attractive for advanced photovoltaic applications. This study presents a comparative analysis of the most effective chemical etchings developed for related thin film chalcogenide technologies to identify and understand the most appropriate surface chemical treatments for Sb2Se3 in substrate configuration, synthesized using a sequential process at very low temperatures (320 °C). Eight different chemical etchings were tested and investigated, and the results show that only KCN-based solutions lead to an improvement in the solar cell's performance, primarily due to an increase in the fill factor. Surface analysis of the samples shows that KCN etching produces very Sb-rich surfaces that do not affect the properties of the bulk. It is proposed that this Sb-rich interface inverts the surface polarity, creating a "buried junction" with CdS, thereby explaining the improvement of the fill factor of the devices, as confirmed by device modeling. The results of this study underscore the importance of surface management in low-temperature synthesized Sb2Se3 absorbers, where Sb-rich interfaces are crucial for achieving high-efficiency devices. This research contributes to ongoing efforts to improve the performance of Sb2Se3 thin film photovoltaic technology and could pave the way for the development of more efficient solar cells with optimized interfaces., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement No. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE); by the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41 and C44), MIRACLE project (TED2021-130265B-C21), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S). S.Y. is financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. I.C. acknowledges UPC and Banco Santander for the FPI-UPC scholarship (2021 FPI-UPC_060), and Z.J. acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). E.S. acknowledges the ICREA Academia program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CuFeS2/Cu2S/FeS2 Composite to Increase the Performance of Thin-Film Thermoelectric Generators Based on Sustainable Materials

  • Malagutti, Marcelo Augusto
  • Lohani, Ketan
  • Caño Prades, Ivan
  • Navarro-Güell, Alejandro
  • Bernard, Tanguy
  • Chiappini, Andrea
  • Saucedo, Edgardo
  • Ataollahi, Narges
  • Scardi, Paolo
Thermoelectric devices convert waste heat into electric energy but typically rely on scarce, expensive, and toxic Te-based materials. To address these limitations, we propose the Cu-Fe-S sulfide system as a nontoxic, abundant, and environmentally friendly alternative, with enhanced properties achieved through the synergistic behavior of CuFeS2, Cu2S, and FeS2 phases in a thin-film thermoelectric generator. These phases were synthesized using a three-step process: ball milling, thermal evaporation, and sulfurization of Cu/Fe precursors, with the CuFeS2/Cu2S/FeS2 phase ratio being tuned by adjusting the sulfurization temperature and duration. The presence of binary sulfides enhances the electric connectivity between CuFeS2 grains, which on their own exhibit poor electrical conductivity due to the formation of isolated grains during nucleation. The composite achieved a volumetric power density of 20 μW cm-3 K-1, outperforming similar Cu-based materials such as Cu2SnS3 and Cu2ZnSnS/Se4, mainly due to its optimized phase composition, higher density, and the superior Seebeck coefficient and electrical conductivity achieved through nanoinclusion. The eco-friendly, low-cost Cu-Fe-S system, synthesized through scalable ball milling and thermal evaporation, presents a promising alternative to conventional materials for sustainable thermoelectric generation., This study was funded by the Italian Ministry of Universitiesand Research (MUR), in the framework of the projectDICAM-EXC (Departments of Excellence 2023−2027, grantL232/2016). The authors acknowledge the Science Ministry ofSpain project numbers PID2020-116719RB-C41 (MATER-ONE) and TED2021-130265B-C21 (MIRACLE). E.S. isgrateful to the ICREA Academia program., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The influence of annealing on the Sb layer in the synthesis of [001]-oriented Sb2Se3 film for photoelectrochemical hydrogen gas generation

  • Costa, Magno Barcelos
  • Araújo, Moisés Albuquerque de
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Andreu, Teresa|||0000-0002-2804-4545
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Mascaro, Lucia Helena
This work reports a new thermal treatment approach to obtain [001]-oriented Sb2Se3 film, which consists of preliminary annealing of the Sb layer before its selenization. Among the different Sb annealing temperatures assessed, the one at 200 °C followed by selenization (Sb2Se3(Sb-A200)) results in a considerably high texture coefficient at the [001] direction, whereas the Sb2Se3 film obtained only by selenization of the non-annealed Sb film (Sb2Se3(Sb-NA)) features preferential orientation at the [hk0] direction. In terms of photoelectrochemical (PEC) performance for H2 generation, the Sb2Se3(Sb-A200)/CdS/TiO2/Pt film delivers a substantial photocurrent density of -5.65 mA cm-2 at 0 VRHE, which is 10 times higher compared to the Sb2Se3(Sb-NA)/CdS/TiO2/Pt film. Additionally, the employment of the Sb annealing step results in stable PEC performance of the Sb2Se3 film over 7000 s, meaning that the photocorrosion is minimized. The improved PEC performance of the Sb2Se3 film is attributed to better crystallinity and composition closer to the stoichiometric condition, as well as the preferential orientation at the [001] direction that favors charger carriers' transportation. At last, the findings of this work feature an innovative thermal treatment approach to obtain [001]-oriented Sb2Se3 film to further improve H2 generation from PEC water splitting., This study was financed, in part, by the São Paulo Research Foundation (FAPESP), Brazil. Process numbers #2021/07727-0, #2017/21365-8, #2017/11986-5, #2016/12681-0, #2013/07296-2; the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) [grant numbers #406156/2022-0 and #311769/2022-5]; FINEP-MCTI 01.22.0179.00, the European Union H2020 Framework Programme under Grant Agreement No. 866018, Low dimensional semiconductors for optically tuneable solar harvesters (SENSATE); the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41 and C44), MIRACLE project (TED2021-130265B-C21) and INTELEC project (TED2021130461B-I00). E.S. acknowledges the ICREA Academia program. The authors also would like to thank Prof. Dr. Valmor R. Mastelaro from Universidade de São Paulo (USP) for obtaining the XPS spectra of the samples. The Article Processing Charge for the publication of this research was funded by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior- Brasil (CAPES) (ROR identifier: 00x0ma614)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hole Transport Layer based on atomic layer deposited V2Ox films: paving the road to semi-transparent CZTSe solar cells

  • Almache Hernández, Rosa Estefanía|||0000-0002-3172-5026
  • Pusay Villarroel, Benjamín Andrés
  • Tiwari, Kunal Jogendra|||0000-0002-1126-2634
  • Ros, Eloi
  • Masmitjà Rusiñol, Gerard|||0000-0001-9541-7586
  • Becerril Romero, Ignacio
  • Martín García, Isidro|||0000-0001-8833-9057
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work explores the use of very thin transparent vanadium oxide films deposited by atomic layer deposition (ALD) technique as hole transport layer for CZTSe solar cells as alternative of opaque molybdenum based contacts. Contact resistivity between the CZTSe absorber and the ALD V2Ox contact was measured. In order to improve contact quality, a cleaning bath using hydrofluoric acid (HF) dip, was also analyzed and its influence on kesterite surface was studied. Elementary material characterization and composition analysis of the V2Ox layers was performed. Contact quality was assessed yielding contact resistivity values below 9 and 30 mOcm2 for ALD and thermal evaporated V2Ox films respectively. The proposed ALD V2Ox based hole transport layer was deposited onto a glass covered with a transparent conductive oxide forming part of the rear contact scheme of a vertical CZTSe solar cell with a conventional ITO/CdS stack as electron transport layer. The impact of subsequent thermal post-annealing treatments in the cell performance was also analyzed yielding efficiency up to 3.9% on a semi-transparent CZTSe solar cell without any additional optimization process. In this way, a CZTSe solar cell with both transparent electrodes has been demonstrated paving the way to obtain in the future high efficiency bifacial and/or semitransparent Building –integrated photovoltaic devices., Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopias Avanzadas" at Universidad de Zaragoza; moreover, this work has been supported by the Ecuadorian government grants SENESCYT (BECAS DE POSGRADOS INTERNACIONALES 2018), Spanish Government through projects IGNITE (ENE2017-87671-C3-2-R) - SCALED (PID2019-109215RB-C41) and the European Research Council Grant Horizon 2020 CUSTOM-ART project (Grant agreement ID: 952982) and Ministerio de Ciencia e Innovación, grant number PID2020-116719RB-C41, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

SbSeI and SbSeBr micro-columnar solar cells by a novel high pressure-based synthesis process

  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Navarro Güell, Alejandro
  • Maggi, Edoardo
  • Barrio Casado, María del|||0000-0003-3467-7581
  • Tamarit Mur, José Luis|||0000-0002-7965-0000
  • Svatek, Simon Aurel
  • Antolin, Elisa
  • Yan, Shunya
  • Barrena Villas, Esther
  • Galiana Blanco, Beatriz
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
Van der Waals chalcogenides and chalcohalides have the potential to become the next thin film PV breakthrough, owing to the earth-abundancy and non-toxicity of their components, and their stability, high absorption coefficient and quasi-1D structure, which leads to enhanced electrical anisotropic properties when the material is oriented in a specific crystalline direction. However, quasi-1D semiconductors beyond Sb2(S,Se)3, such as SbSeX chalcohalides, have been scarcely investigated for energy generation applications, and rarely synthesised by physical vapor deposition methodologies, despite holding the promise of widening the bandgap range (opening the door to tandem or semi-transparent devices), and showing enticing new properties such as ferroelectric behaviour and defect-tolerant nature. In this work, SbSeI and SbSeBr micro-columnar solar cells have been obtained for the first time by an innovative methodology based on the selective halogenation of Sb2Se3 thin films at pressure above 1 atm. It is shown that by increasing the annealing temperature and pressure, the height and density of the micro-columnar structures grows monotonically, resulting in SbSeI single-crystal columns up to 30 µm, and tuneable morphology. In addition, solar cell prototypes with substrate configuration have shown remarkable Voc values above 550 mV and 1.8 eV bandgap., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Poly(amidoamine) dendrimer as an interfacial dipole modification in crystalline silicon solar cells

  • Tom, Thomas
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Lopez Vidrier, Julià
  • Asensi López, José Miguel
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Bertomeu Balagueró, Joan
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
This document is the Accepted Manuscript version of a Published Work that appeared in final form in The journal of physical chemistry letters, copyright © 2023 The Authors. Published by American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/full/10.1021/acs.jpclett.3c00643, Poly(amidoamine) (PAMAM) dendrimers are used to modify the interface of metal-semiconductor junctions. The large number of protonated amines contributes to the formation of a dipole layer, which finally serves to form electron-selective contacts in silicon heterojunction solar cells. By modification of the work function of the contacts, the addition of the PAMAM dendrimer interlayer quenches Fermi level pinning, thus creating an ohmic contact between the metal and the semiconductor. This is supported by the observation of a low contact resistivity of 4.5 mO cm2 , the shift in work function, and the n-type behavior of PAMAM dendrimer films on the surface of crystalline silicon. A silicon heterojunction solar cell containing the PAMAM dendrimer interlayer is presented, which achieved a power conversion efficiency of 14.5%, an increase of 8.3% over the reference device without the dipole interlayer., This research has been supported by the Spanish government through Grants PID2019-109215RB-C41, PID2019- 109215RB-C43, and PID2020-116719RB-C41 funded by MCIN/AEI/10.13039/501100011033. Thomas Tom acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and the European Social Fund (2019 FI_B 00456). In addition, the authors thank the technical staff from Barcelona Research Center in Multiscale Science and Engineering from the Universitat Politecnica ̀ de Catalunya for their expertise and helpful discussions over the XPS results, Dr. Oriol Arteaga from the Universitat de Barcelona for the ellipsometry measurements, and Guillaume Sauthier from the Catalan Institute of Nanoscience and Nanotechnology for his contribution to UPS measurements and their discussion., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards the bisbenzothienocarbazole core: a route of sulfurated carbazole derivatives with assorted optoelectronic properties and applications

  • Bujaldón Carbó, Roger
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Velasco Castrillo, Maria Dolores
Ladder-type molecules, which possess an extended aromatic backbone, are particularly sought within the optoelectronic field. In view of the potential of the 14H-bis[1]benzothieno[3,2-b:2’,3’-h]carbazole core as a p-type semiconductor, herein we studied a set of two derivatives featuring a different alkylation patterning. The followed synthetic route, involving various sulfurated carbazole-based molecules, also resulted in a source of fluorophores with different emitting behaviors. Surprisingly, the sulfoxide-containing fluorophores substantially increased their blue fluorescence with respect to the nearly non-emitting sulfur counterparts. On this basis, we could shed light on the relationship between their chemical structure and their emission as an approach for future applications. Considering the performance in organic thin-film transistors, both bisbenzothienocarbazole derivatives displayed p-type characteristics, with hole mobility values up to 1.1 × 10-3 cm2 V-1 s-1 and considerable air stability. Moreover, the role of the structural design has been correlated with the device performance by means of X-ray analysis and the elucidation of the corresponding single crystal structures., This research was funded by the Ministerio de Economía, Indústria y Competitividad, grant number FUNMAT-PGC2018-095477-B-I00, and the Ministerio de Ciencia e Innovación, grant number PID2020-116719RB-C41., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of the thickness of amorphous silicon carbide interlayer on the passivation of c-Ge surface by aluminium oxide films

  • Martín García, Isidro|||0000-0001-8833-9057
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Surface passivation is of paramount importance in photovoltaic devices based on high-quality crystalline absorbers such as crystalline germanium (c-Ge). In this work, we report on the surface passivation of p-type c-Ge by an amorphous silicon carbide/aluminium oxide film stack (a-SiCx/Al2O3). In particular, we focus on the impact of the thin (0, 1, 2, and 4 nm) a-SiCx interlayer which is used to provide chemical passivation while the Al2O3 is responsible for the field-effect passivation due to its high negative fixed charge density. The measured effective surface recombination velocity (Seff) values show that the introduction of the a-SiCx interlayer improves surface passivation, but the thinner the a-SiCx film the better. High frequency capacitance-voltage characterization leads to the determination of the fixed charge density (Qf) which indicates that the a-SiCx is shielding the negative charge located at the first nanometers of the Al2O3 film, as suggested by chemical characterization of the interface. As a consequence, the best result is Seff = 18 cm/s for the case of 1 nm of a-SiCx., This work has been supported by the Spanish government under projects PID2019–109215RB-C41 (SCALED), PID2020–116719RB-C41 (MATER ONE) and PID2020–115719RB-C21 (GETPV) funded by MCIN/AEI/10.13039/501100011033. The authors would like to thank the master student Guillem Ayats for his help in processing the samples, Dr. Alejandro Datas from Instituto de Energía Solar (IES) in Madrid for providing the c-Ge wafers and Dr. Rodrigo Fernández-Pacheco of the Laboratorio de Microscopias Avanzadas (LMA-INA) of Zaragoza for the EELS analysis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Elimination of interface energy barriers using dendrimer polyelectrolytes with fractal geometry

  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Tom, Thomas
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Martín García, Isidro|||0000-0001-8833-9057
  • Maggi, Edoardo
  • Asensi López, José Miguel
  • Lopez Vidrier, Julià
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
In this work we study conjugated polyelectrolyte (CPE) films based on polyamidoamine (PAMAM) dendrimers of generations G1 and G3. These fractal macromolecules are compared to branched polyethylenimine (b-PEI) polymer using methanol as the solvent. All of these materials present a high density of amino groups, which protonated by methoxide counter-anions create strong dipolar interfaces. The vacuum level shift associated to these films on n-type silicon was 0.93 eV for b-PEI, 0.72 eV for PAMAM G1 and 1.07 eV for PAMAM G3. These surface potentials were enough to overcome Fermi level pinning, which is a typical limitation of aluminium contacts on n-type silicon. A specific contact resistance as low as 20 mO·cm2 was achieved with PAMAM G3, in agreement with the higher surface potential of this material. Good electron transport properties were also obtained for the other materials. Proof-of-concept silicon solar cells combining vanadium oxide as a hole-selective contact with these new electron transport layers have been fabricated and compared. The solar cell with PAMAM G3 surpassed 15% conversion efficiency with an overall increase of all the photovoltaic parameters. The performance of these devices correlates with compositional and nanostructural studies of the different CPE films. Particularly, a figure-of-merit (Vs) for CPE films that considers the number of protonated amino groups per macromolecule has been introduced. The fractal geometry of dendrimers leads to a geometric increase in the number of amino groups per generation. Thus, investigation of dendrimer macromolecules seems a very good strategy to design CPE films with enhanced charge-carrier selectivity., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement no. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE), by the Spanish Ministry of Science, Innovation and Universities under the MATERONE project (PID2020-116719RB-C41) as well as PID2019- 109215RB-C43 and PID2019-109215RB-C41. E.S. also thanks the ICREA Academia Program. One of the authors (T. Tom) acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456). This work is also part of projects PID2020-115719RB-C21 (GETPV) and TED2021-131778B (TROPIC) funded b y MCIN/AEI/10.13039/ 5011000110033. Project TED2021-131778B (TROPIC) is also funded by European Union “NextGenerationEU”/PRTR.″, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical investigation of interface passivation strategies for Sb2Se3/CdS solar cells

  • Gon Medaille, Axel|||0000-0002-8628-0781
  • Tiwari, Kunal Jogendra|||0000-0002-1126-2634
  • Giraldo, Sergio
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Jehl Li-Kao, Zacharie
Sb2Se3 is an emerging earth-abundant material praised for its promising optoelectronic properties, although the presence of interfacial defects at the vicinity of the p–n junction limit its performance as photovoltaic absorber. Using a device modeling approach and a realistic set of material parameters, it unravels pathways mitigating the impact of interfacial defects with a baseline Sb2Se3/CdS. Two straightforward strategies are devised and tested against the baseline. First, a thin front surface sulfurization of the Sb2Se3 absorber allowing a local lowering of the valence band and creating a “front surface field,” resulting in an increased carrier selectivity and limiting the density of holes available for interface recombination, leading to a significant efficiency improvement for optimized conditions. Second, the use of an ultrathin insulating Al2O3 layer between the absorber and the buffer layer is considered, helping in preventing detrimental chemical interdiffusion at the junction. This strategy provides a direct interface passivation, though the interlayer thickness needs a fine tuning to balance the benefits of reduced interface recombination and a detrimental Al2O3 low-conductivity layer. In each case, an analysis covering a broad range of parameters is presented, and conclusions are made in the frame of past numerical and experimental results., The authors thank Prof. Marc Burgelman, for his invaluable contribution to the field of photovoltaics by designing the program SCAPS, now widely used by various research groups around the world. The authors acknowledge the European Research Council ERC-CoG grant SENSATE (grant agreement ID: 866018) for the financial support of this work. This work is part of the R+D+i MaterOne project ref. PID 2020-116719RB-C41 funded by MCIN/AEI/10.13039/5011000110033. M.P. acknowledges the Spanish Ministry of Science and Innovation (MCIN) for the financial support in the frame of the Ramon y Cajal program (RYC-2017-23758)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac|||0009-0005-5699-466X
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel|||0000-0002-0890-0842
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • de Benito, Carola
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hole selective contacts based on transition metal oxides for c-Ge thermophotovoltaic devices

  • Martín García, Isidro|||0000-0001-8833-9057
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Garin Escriva, Moises|||0000-0003-1309-7457
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
© 2023 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Thermophotovoltaics has become a very attractive solution for heat-to-electricity conversion due to its excellent conversion efficiencies. However, further research is needed to reduce the device cost which is typically based on III-V semiconductors. To tackle this limitation, crystalline germanium (c-Ge) has been proposed as an excellent substrate for low-cost devices. One of the key advances behind high system efficiencies is the excellent reflectance of the out-of-band photons at the rear surface of the photovoltaic device. These photons with lower energy than the absorber bandgap are reflected back to the thermal emitter reducing its thermal losses. In this work, we explore the performance of hole selective contacts based on evaporated transition metal oxides (MoOx, VOx, WOx) to be introduced at the rear surface of c-Ge devices. Regarding electrical properties, we characterize the selectivity of the contact by measuring effective surface recombination velocity (Seff) and contact resistivity (¿C). Best results are obtained with MoOx contacted by Ag/ITO with Seff = 588 cm/s and ¿C = 55.6 mO cm2 which can be improved by using gold as a metal contact leading to Seff = 156 cm/s and ¿C = 60.9 mO cm2. Regarding out-of-band reflectance, it is better for the case of Ag/ITO/MoOx contact with 87.5% compared to 78.9% for Au/MoOx when a 1473 K black body spectrum is used. Device simulations show potential system efficiencies in the range of 18–19% which are comparable to the best reported efficiencies using c-Ge thermophotovoltaic devices., This work has been supported by the Spanish government under projects PID2019-109215RB-C41 (SCALED), PID2020-116719RB-C41 (MATER ONE) and PID2020-115719RB-C21 (GETPV) funded by MCIN/ AEI/10.13039/501100011033. The authors would like to thank the master student Oscar Llados ´ and Guillem Ayats for their help in processing the samples, Dr. Alejandro Datas from Instituto de Energía Solar (IES) in Madrid for providing the c-Ge wafers and fruitful discussions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption

  • Lopez-Garcia, Alex J.
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Asensi López, José Miguel
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Izquierdo Roca, Víctor
  • Perez Rodriguez, Alejandro
This is the peer reviewed version of the following article: Lopez-Garcia, A. [et al.]. Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption. "Solar RRL", April 2023, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/solr.202200928. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., Herein, the fabrication of transparent solar cells based on nanometric (8 and30 nm) intrinsic hydrogenated amorphous siliconfilms (a-Si:H) and using oxidethinfilms as transparent carrier selective contacts are reported. The ultrathindevices present photovoltaic effect and high average visible transmittance (AVT).Additionally, they display a shifted spectral response toward short wavelengths.Glass/fluorine-doped tin oxide (FTO)/aluminum-doped zinc oxide (AZO)/a-Si:H/MoO3/indium tin oxide (ITO) prototypes are shown, presenting AVT=35% andphotovoltaic conversion efficiency (PCE)=2% for a device with a 30 nm a-Si:Hfilm. This yields a light utilization efficiency (LUE) of 0.7%, a record up to this datefor inorganic oxide-based transparent solar cells. For devices including an 8 nma-Si:Hfilm, the AVT reaches 66% with a PCE=0.6% (LUE=0.4%). These highAVT values are comparable or even superior in some cases to those achieved forpure oxide devices. Thesefindings confirm the potential of the proposedarchitectures for the development of highly transparent energy harvesters asfunctional components in building-integrated photovoltaics (BIPV), agrophoto-voltaics (APV), sensors and other low-power devices. In addition, these devicesare fabricated with earth-abundant materials and with up-scalable techniquesthat can allow for a feasible implementation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interdigitated back-contacted crystalline silicon solar cells fully manufactured with atomic layer deposited selective contacts

  • Masmitjà Rusiñol, Gerard|||0000-0001-9541-7586
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Almache Hernández, Rosa Estefanía|||0000-0002-3172-5026
  • Pusay Villarroel, Benjamín Andrés
  • Martín García, Isidro|||0000-0001-8833-9057
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
The interdigitated back-contacted (IBC) solar cell concept has been extensively studied for single-junction cells and more recently as a good choice for three-terminal tandem devices. In this work, carrier-selective contacts based on transition metal oxides deposited by atomic layer deposition (ALD) technique are applied to IBC c-Si(n) devices. In the first part of the study, we develop a hole-selective contact based on thin ALD vanadium oxide (V2O5) layers without using an amorphous silicon interlayer. The ALD process has been optimised, i.e. number of ALD cycles and deposition temperature, as a trade-off between surface passivation and contact resistivity. Noticeable surface passivation with recombination current densities around 100 fA/cm2, as well as reasonable contact resistivity values below 250 mOcm2 are reached using 200 ALD V2O5 cycles deposited at a deposition temperature of 125 °C (~10 nm layer thickness). The optimised ALD V2O5-based contact is combined with both an ALD TiO2-based electron-selective contact and an excellent surface passivation in non-contacted regions provided by ALD Al2O3 films, to form a fully ALD IBC c-Si(n) solar cell scheme. Fabricated devices yield photovoltaic efficiencies and pseudo efficiencies, i.e. calculated without series resistance losses, of 18.6% and 21.1% respectively (3 cm × 3 cm device area). These results reveal the potential of the ALD technique to deposit transition metal oxide (TMO) films as selective contacts on high efficiency devices, paving the way of using low thermal-budget, low cost and highly scalable processes for a highly demanding IBC solar cell architecture in the photovoltaic industry., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards low cost and sustainable thin film thermoelectric devices based on quaternary chalcogenides

  • Isotta, Eleonora
  • Andrade Arvizu, Jacob
  • Syafiq, Ubaidah
  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Navarro Güell, Alejandro
  • Guc, Maxim|||0000-0002-2072-9566
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Scardi, Paolo
This is the peer reviewed version of the following article: Isotta, E. [et al.]. Towards low cost and sustainable thin film thermoelectric devices based on quaternary chalcogenides. "ADVANCED FUNCTIONAL MATERIALS", 20 Maig 2022, núm. 2202157, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/adfm.202202157. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., A major challenge in thermoelectrics (TEs) is developing devices made of sustainable, abundant, and non-toxic materials. Furthermore, the technological drive toward low sizes makes crucial the study of nano and micro configurations. In this work, thin film TE devices based on p-type Cu2+xZn1-xSnS4 and Cu2+xZn1-xSnSe4, and n-type AlyZn1-yO are fabricated by physical vapor deposition. The kesterite phases show good purity and promising TE power factor, likely enhanced by the copper–zinc order–disorder transition. Thin film generators in planar configuration are assembled by a sequential deposition of the p-type, n-type, and contact materials. The power per unit planar area reaches 153 and 279 nW cm-2 for the sulphur- and selenium-based generators, respectively. These values significantly outperform any other literature attempt based on sustainable and low-cost thin films. Furthermore, if compared with traditional TEs often made of scarce and toxic materials, these devices offer a cost reduction above 80%. This allows reaching comparable values of power density per unit material cost, representing a first real step toward the development of sustainable and non-toxic thin film TE devices. These can find applications in micro energy harvesters, microelectronics coolers, and temperature controllers for wearables, medical appliances, and sensors for the internet of things., A.J. thanks the European Social Fund+ for the FI fellowship. The authors would like to acknowledge the help of Dr. Mirco D’Incau, Dr. Narges Ataollahi, and Prof. Della Volpe for the design of the measuring setup, as well as useful discussion with Prof. Dario Narducci. This research has received funding from the Spanish Ministry of Science, Innovation and Universities under the MATER-ONE projects (PID2020-116719RB-C41). Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2017 SGR 862) and are grateful to European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). M.G. acknowledges the financial support from Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva fellowship (IJC2018-038199-I). E.S. acknowledges the ICREA Academia Program. Open Access Funding provided by Universita degli Studi di Trento within the CRUI-CARE Agreement., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Photovoltaics in UPC Bachelor’s degree in Electronic Engineering

  • Silvestre Bergés, Santiago|||0000-0002-0342-6096
  • Torres Torres, Francisco|||0000-0003-1160-6350
This study delineates the curriculum covering the instruction of photovoltaic (PV) solar energy within the Electronic Telecommunications Engineering Bachelor's Degree at the Barcelona School of Telecommunications Engineering (ETSETB), part of the Polytechnic University of Catalonia (UPC). This program commenced during the academic year 2018-2019 at the ETSETB. The curriculum comprises three courses dedicated to the study of PV solar energy within the program. A compulsory course: Electric Power Processing (6 ECTS), and two elective courses: Photovoltaic devices (6 ECTS) and Photovoltaic Solar Energy (2 ECTS)., This work has received funding from the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical investigation of interface passivation strategies for Sb2Se3/CdS solar cells

  • Gon Medaille, Axel
  • Tiwari, Kunal Jogendra
  • Giraldo, Sergio
  • Placidi, Marcel Jose
  • Saucedo Silva, Edgardo Ademar
  • Jehl Li-Kao, Zacharie
Sb2Se3 is an emerging earth-abundant material praised for its promising optoelectronic properties, although the presence of interfacial defects at the vicinity of the p–n junction limit its performance as photovoltaic absorber. Using a device modeling approach and a realistic set of material parameters, it unravels pathways mitigating the impact of interfacial defects with a baseline Sb2Se3/CdS. Two straightforward strategies are devised and tested against the baseline. First, a thin front surface sulfurization of the Sb2Se3 absorber allowing a local lowering of the valence band and creating a “front surface field,” resulting in an increased carrier selectivity and limiting the density of holes available for interface recombination, leading to a significant efficiency improvement for optimized conditions. Second, the use of an ultrathin insulating Al2O3 layer between the absorber and the buffer layer is considered, helping in preventing detrimental chemical interdiffusion at the junction. This strategy provides a direct interface passivation, though the interlayer thickness needs a fine tuning to balance the benefits of reduced interface recombination and a detrimental Al2O3 low-conductivity layer. In each case, an analysis covering a broad range of parameters is presented, and conclusions are made in the frame of past numerical and experimental results., The authors thank Prof. Marc Burgelman, for his invaluable contribution to the field of photovoltaics by designing the program SCAPS, now widely used by various research groups around the world. The authors acknowledge the European Research Council ERC-CoG grant SENSATE (grant agreement ID: 866018) for the financial support of this work. This work is part of the R+D+i MaterOne project ref. PID 2020-116719RB-C41 funded by MCIN/AEI/10.13039/5011000110033. M.P. acknowledges the Spanish Ministry of Science and Innovation (MCIN) for the financial support in the frame of the Ramon y Cajal program (RYC-2017-23758)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
  • de Benito, Carola
  • Llorca Piqué, Jordi
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The influence of annealing on the Sb layer in the synthesis of [001]-oriented Sb2Se3 film for photoelectrochemical hydrogen gas generation

  • Costa, Magno Barcelos
  • Araújo, Moisés Albuquerque de
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Andreu, Teresa
  • Voz Sánchez, Cristóbal
  • Saucedo Silva, Edgardo Ademar
  • Mascaro, Lucia Helena
This work reports a new thermal treatment approach to obtain [001]-oriented Sb2Se3 film, which consists of preliminary annealing of the Sb layer before its selenization. Among the different Sb annealing temperatures assessed, the one at 200 °C followed by selenization (Sb2Se3(Sb-A200)) results in a considerably high texture coefficient at the [001] direction, whereas the Sb2Se3 film obtained only by selenization of the non-annealed Sb film (Sb2Se3(Sb-NA)) features preferential orientation at the [hk0] direction. In terms of photoelectrochemical (PEC) performance for H2 generation, the Sb2Se3(Sb-A200)/CdS/TiO2/Pt film delivers a substantial photocurrent density of -5.65 mA cm-2 at 0 VRHE, which is 10 times higher compared to the Sb2Se3(Sb-NA)/CdS/TiO2/Pt film. Additionally, the employment of the Sb annealing step results in stable PEC performance of the Sb2Se3 film over 7000 s, meaning that the photocorrosion is minimized. The improved PEC performance of the Sb2Se3 film is attributed to better crystallinity and composition closer to the stoichiometric condition, as well as the preferential orientation at the [001] direction that favors charger carriers' transportation. At last, the findings of this work feature an innovative thermal treatment approach to obtain [001]-oriented Sb2Se3 film to further improve H2 generation from PEC water splitting., This study was financed, in part, by the São Paulo Research Foundation (FAPESP), Brazil. Process numbers #2021/07727-0, #2017/21365-8, #2017/11986-5, #2016/12681-0, #2013/07296-2; the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) [grant numbers #406156/2022-0 and #311769/2022-5]; FINEP-MCTI 01.22.0179.00, the European Union H2020 Framework Programme under Grant Agreement No. 866018, Low dimensional semiconductors for optically tuneable solar harvesters (SENSATE); the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41 and C44), MIRACLE project (TED2021-130265B-C21) and INTELEC project (TED2021130461B-I00). E.S. acknowledges the ICREA Academia program. The authors also would like to thank Prof. Dr. Valmor R. Mastelaro from Universidade de São Paulo (USP) for obtaining the XPS spectra of the samples. The Article Processing Charge for the publication of this research was funded by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior- Brasil (CAPES) (ROR identifier: 00x0ma614)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Poly(amidoamine) dendrimer as an interfacial dipole modification in crystalline silicon solar cells

  • Tom, Thomas
  • Ros Costals, Eloi
  • Lopez Vidrier, Julià
  • Asensi López, José Miguel
  • Ortega Villasclaras, Pablo Rafael
  • Puigdollers i González, Joaquim
  • Bertomeu Balagueró, Joan
  • Voz Sánchez, Cristóbal
This document is the Accepted Manuscript version of a Published Work that appeared in final form in The journal of physical chemistry letters, copyright © 2023 The Authors. Published by American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/full/10.1021/acs.jpclett.3c00643, Poly(amidoamine) (PAMAM) dendrimers are used to modify the interface of metal-semiconductor junctions. The large number of protonated amines contributes to the formation of a dipole layer, which finally serves to form electron-selective contacts in silicon heterojunction solar cells. By modification of the work function of the contacts, the addition of the PAMAM dendrimer interlayer quenches Fermi level pinning, thus creating an ohmic contact between the metal and the semiconductor. This is supported by the observation of a low contact resistivity of 4.5 mO cm2 , the shift in work function, and the n-type behavior of PAMAM dendrimer films on the surface of crystalline silicon. A silicon heterojunction solar cell containing the PAMAM dendrimer interlayer is presented, which achieved a power conversion efficiency of 14.5%, an increase of 8.3% over the reference device without the dipole interlayer., This research has been supported by the Spanish government through Grants PID2019-109215RB-C41, PID2019- 109215RB-C43, and PID2020-116719RB-C41 funded by MCIN/AEI/10.13039/501100011033. Thomas Tom acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and the European Social Fund (2019 FI_B 00456). In addition, the authors thank the technical staff from Barcelona Research Center in Multiscale Science and Engineering from the Universitat Politecnica ̀ de Catalunya for their expertise and helpful discussions over the XPS results, Dr. Oriol Arteaga from the Universitat de Barcelona for the ellipsometry measurements, and Guillaume Sauthier from the Catalan Institute of Nanoscience and Nanotechnology for his contribution to UPS measurements and their discussion., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hole selective contacts based on transition metal oxides for c-Ge thermophotovoltaic devices

  • Martín García, Isidro
  • López Rodríguez, Gema
  • Garin Escriva, Moises
  • Ros Costals, Eloi
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
© 2023 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Thermophotovoltaics has become a very attractive solution for heat-to-electricity conversion due to its excellent conversion efficiencies. However, further research is needed to reduce the device cost which is typically based on III-V semiconductors. To tackle this limitation, crystalline germanium (c-Ge) has been proposed as an excellent substrate for low-cost devices. One of the key advances behind high system efficiencies is the excellent reflectance of the out-of-band photons at the rear surface of the photovoltaic device. These photons with lower energy than the absorber bandgap are reflected back to the thermal emitter reducing its thermal losses. In this work, we explore the performance of hole selective contacts based on evaporated transition metal oxides (MoOx, VOx, WOx) to be introduced at the rear surface of c-Ge devices. Regarding electrical properties, we characterize the selectivity of the contact by measuring effective surface recombination velocity (Seff) and contact resistivity (¿C). Best results are obtained with MoOx contacted by Ag/ITO with Seff = 588 cm/s and ¿C = 55.6 mO cm2 which can be improved by using gold as a metal contact leading to Seff = 156 cm/s and ¿C = 60.9 mO cm2. Regarding out-of-band reflectance, it is better for the case of Ag/ITO/MoOx contact with 87.5% compared to 78.9% for Au/MoOx when a 1473 K black body spectrum is used. Device simulations show potential system efficiencies in the range of 18–19% which are comparable to the best reported efficiencies using c-Ge thermophotovoltaic devices., This work has been supported by the Spanish government under projects PID2019-109215RB-C41 (SCALED), PID2020-116719RB-C41 (MATER ONE) and PID2020-115719RB-C21 (GETPV) funded by MCIN/ AEI/10.13039/501100011033. The authors would like to thank the master student Oscar Llados ´ and Guillem Ayats for their help in processing the samples, Dr. Alejandro Datas from Instituto de Energía Solar (IES) in Madrid for providing the c-Ge wafers and fruitful discussions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interdigitated back-contacted crystalline silicon solar cells fully manufactured with atomic layer deposited selective contacts

  • Masmitjà Rusiñol, Gerard
  • Ros Costals, Eloi
  • Almache Hernández, Rosa Estefanía
  • Pusay Villarroel, Benjamín Andrés
  • Martín García, Isidro
  • Voz Sánchez, Cristóbal
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
The interdigitated back-contacted (IBC) solar cell concept has been extensively studied for single-junction cells and more recently as a good choice for three-terminal tandem devices. In this work, carrier-selective contacts based on transition metal oxides deposited by atomic layer deposition (ALD) technique are applied to IBC c-Si(n) devices. In the first part of the study, we develop a hole-selective contact based on thin ALD vanadium oxide (V2O5) layers without using an amorphous silicon interlayer. The ALD process has been optimised, i.e. number of ALD cycles and deposition temperature, as a trade-off between surface passivation and contact resistivity. Noticeable surface passivation with recombination current densities around 100 fA/cm2, as well as reasonable contact resistivity values below 250 mOcm2 are reached using 200 ALD V2O5 cycles deposited at a deposition temperature of 125 °C (~10 nm layer thickness). The optimised ALD V2O5-based contact is combined with both an ALD TiO2-based electron-selective contact and an excellent surface passivation in non-contacted regions provided by ALD Al2O3 films, to form a fully ALD IBC c-Si(n) solar cell scheme. Fabricated devices yield photovoltaic efficiencies and pseudo efficiencies, i.e. calculated without series resistance losses, of 18.6% and 21.1% respectively (3 cm × 3 cm device area). These results reveal the potential of the ALD technique to deposit transition metal oxide (TMO) films as selective contacts on high efficiency devices, paving the way of using low thermal-budget, low cost and highly scalable processes for a highly demanding IBC solar cell architecture in the photovoltaic industry., Peer Reviewed, Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of the thickness of amorphous silicon carbide interlayer on the passivation of c-Ge surface by aluminium oxide films

  • Martín García, Isidro
  • López Rodríguez, Gema
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Surface passivation is of paramount importance in photovoltaic devices based on high-quality crystalline absorbers such as crystalline germanium (c-Ge). In this work, we report on the surface passivation of p-type c-Ge by an amorphous silicon carbide/aluminium oxide film stack (a-SiCx/Al2O3). In particular, we focus on the impact of the thin (0, 1, 2, and 4 nm) a-SiCx interlayer which is used to provide chemical passivation while the Al2O3 is responsible for the field-effect passivation due to its high negative fixed charge density. The measured effective surface recombination velocity (Seff) values show that the introduction of the a-SiCx interlayer improves surface passivation, but the thinner the a-SiCx film the better. High frequency capacitance-voltage characterization leads to the determination of the fixed charge density (Qf) which indicates that the a-SiCx is shielding the negative charge located at the first nanometers of the Al2O3 film, as suggested by chemical characterization of the interface. As a consequence, the best result is Seff = 18 cm/s for the case of 1 nm of a-SiCx., This work has been supported by the Spanish government under projects PID2019–109215RB-C41 (SCALED), PID2020–116719RB-C41 (MATER ONE) and PID2020–115719RB-C21 (GETPV) funded by MCIN/AEI/10.13039/501100011033. The authors would like to thank the master student Guillem Ayats for his help in processing the samples, Dr. Alejandro Datas from Instituto de Energía Solar (IES) in Madrid for providing the c-Ge wafers and Dr. Rodrigo Fernández-Pacheco of the Laboratorio de Microscopias Avanzadas (LMA-INA) of Zaragoza for the EELS analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards the bisbenzothienocarbazole core: a route of sulfurated carbazole derivatives with assorted optoelectronic properties and applications

  • Bujaldón Carbó, Roger
  • Puigdollers i González, Joaquim
  • Velasco Castrillo, Maria Dolores
Ladder-type molecules, which possess an extended aromatic backbone, are particularly sought within the optoelectronic field. In view of the potential of the 14H-bis[1]benzothieno[3,2-b:2’,3’-h]carbazole core as a p-type semiconductor, herein we studied a set of two derivatives featuring a different alkylation patterning. The followed synthetic route, involving various sulfurated carbazole-based molecules, also resulted in a source of fluorophores with different emitting behaviors. Surprisingly, the sulfoxide-containing fluorophores substantially increased their blue fluorescence with respect to the nearly non-emitting sulfur counterparts. On this basis, we could shed light on the relationship between their chemical structure and their emission as an approach for future applications. Considering the performance in organic thin-film transistors, both bisbenzothienocarbazole derivatives displayed p-type characteristics, with hole mobility values up to 1.1 × 10-3 cm2 V-1 s-1 and considerable air stability. Moreover, the role of the structural design has been correlated with the device performance by means of X-ray analysis and the elucidation of the corresponding single crystal structures., This research was funded by the Ministerio de Economía, Indústria y Competitividad, grant number FUNMAT-PGC2018-095477-B-I00, and the Ministerio de Ciencia e Innovación, grant number PID2020-116719RB-C41., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

SbSeI and SbSeBr micro-columnar solar cells by a novel high pressure-based synthesis process

  • Caño Prades, Ivan
  • Navarro Güell, Alejandro
  • Maggi, Edoardo
  • Barrio Casado, María del
  • Tamarit Mur, José Luis
  • Svatek, Simon Aurel
  • Antolin, Elisa
  • Yan, Shunya
  • Barrena Villas, Esther
  • Galiana Blanco, Beatriz
  • Placidi, Marcel Jose
  • Puigdollers i González, Joaquim
  • Saucedo Silva, Edgardo Ademar
Van der Waals chalcogenides and chalcohalides have the potential to become the next thin film PV breakthrough, owing to the earth-abundancy and non-toxicity of their components, and their stability, high absorption coefficient and quasi-1D structure, which leads to enhanced electrical anisotropic properties when the material is oriented in a specific crystalline direction. However, quasi-1D semiconductors beyond Sb2(S,Se)3, such as SbSeX chalcohalides, have been scarcely investigated for energy generation applications, and rarely synthesised by physical vapor deposition methodologies, despite holding the promise of widening the bandgap range (opening the door to tandem or semi-transparent devices), and showing enticing new properties such as ferroelectric behaviour and defect-tolerant nature. In this work, SbSeI and SbSeBr micro-columnar solar cells have been obtained for the first time by an innovative methodology based on the selective halogenation of Sb2Se3 thin films at pressure above 1 atm. It is shown that by increasing the annealing temperature and pressure, the height and density of the micro-columnar structures grows monotonically, resulting in SbSeI single-crystal columns up to 30 µm, and tuneable morphology. In addition, solar cell prototypes with substrate configuration have shown remarkable Voc values above 550 mV and 1.8 eV bandgap., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards low cost and sustainable thin film thermoelectric devices based on quaternary chalcogenides

  • Isotta, Eleonora
  • Andrade Arvizu, Jacob
  • Syafiq, Ubaidah
  • Jiménez Arguijo, Alex
  • Navarro Güell, Alejandro
  • Guc, Maxim
  • Saucedo Silva, Edgardo Ademar
  • Scardi, Paolo
This is the peer reviewed version of the following article: Isotta, E. [et al.]. Towards low cost and sustainable thin film thermoelectric devices based on quaternary chalcogenides. "ADVANCED FUNCTIONAL MATERIALS", 20 Maig 2022, núm. 2202157, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/adfm.202202157. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., A major challenge in thermoelectrics (TEs) is developing devices made of sustainable, abundant, and non-toxic materials. Furthermore, the technological drive toward low sizes makes crucial the study of nano and micro configurations. In this work, thin film TE devices based on p-type Cu2+xZn1-xSnS4 and Cu2+xZn1-xSnSe4, and n-type AlyZn1-yO are fabricated by physical vapor deposition. The kesterite phases show good purity and promising TE power factor, likely enhanced by the copper–zinc order–disorder transition. Thin film generators in planar configuration are assembled by a sequential deposition of the p-type, n-type, and contact materials. The power per unit planar area reaches 153 and 279 nW cm-2 for the sulphur- and selenium-based generators, respectively. These values significantly outperform any other literature attempt based on sustainable and low-cost thin films. Furthermore, if compared with traditional TEs often made of scarce and toxic materials, these devices offer a cost reduction above 80%. This allows reaching comparable values of power density per unit material cost, representing a first real step toward the development of sustainable and non-toxic thin film TE devices. These can find applications in micro energy harvesters, microelectronics coolers, and temperature controllers for wearables, medical appliances, and sensors for the internet of things., A.J. thanks the European Social Fund+ for the FI fellowship. The authors would like to acknowledge the help of Dr. Mirco D’Incau, Dr. Narges Ataollahi, and Prof. Della Volpe for the design of the measuring setup, as well as useful discussion with Prof. Dario Narducci. This research has received funding from the Spanish Ministry of Science, Innovation and Universities under the MATER-ONE projects (PID2020-116719RB-C41). Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2017 SGR 862) and are grateful to European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). M.G. acknowledges the financial support from Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva fellowship (IJC2018-038199-I). E.S. acknowledges the ICREA Academia Program. Open Access Funding provided by Universita degli Studi di Trento within the CRUI-CARE Agreement., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hole Transport Layer based on atomic layer deposited V2Ox films: paving the road to semi-transparent CZTSe solar cells

  • Almache Hernández, Rosa Estefanía
  • Pusay Villarroel, Benjamín Andrés
  • Tiwari, Kunal Jogendra
  • Ros, Eloi
  • Masmitjà Rusiñol, Gerard
  • Becerril Romero, Ignacio
  • Martín García, Isidro
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
  • Saucedo Silva, Edgardo Ademar
  • Ortega Villasclaras, Pablo Rafael
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work explores the use of very thin transparent vanadium oxide films deposited by atomic layer deposition (ALD) technique as hole transport layer for CZTSe solar cells as alternative of opaque molybdenum based contacts. Contact resistivity between the CZTSe absorber and the ALD V2Ox contact was measured. In order to improve contact quality, a cleaning bath using hydrofluoric acid (HF) dip, was also analyzed and its influence on kesterite surface was studied. Elementary material characterization and composition analysis of the V2Ox layers was performed. Contact quality was assessed yielding contact resistivity values below 9 and 30 mOcm2 for ALD and thermal evaporated V2Ox films respectively. The proposed ALD V2Ox based hole transport layer was deposited onto a glass covered with a transparent conductive oxide forming part of the rear contact scheme of a vertical CZTSe solar cell with a conventional ITO/CdS stack as electron transport layer. The impact of subsequent thermal post-annealing treatments in the cell performance was also analyzed yielding efficiency up to 3.9% on a semi-transparent CZTSe solar cell without any additional optimization process. In this way, a CZTSe solar cell with both transparent electrodes has been demonstrated paving the way to obtain in the future high efficiency bifacial and/or semitransparent Building –integrated photovoltaic devices., Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopias Avanzadas" at Universidad de Zaragoza; moreover, this work has been supported by the Ecuadorian government grants SENESCYT (BECAS DE POSGRADOS INTERNACIONALES 2018), Spanish Government through projects IGNITE (ENE2017-87671-C3-2-R) - SCALED (PID2019-109215RB-C41) and the European Research Council Grant Horizon 2020 CUSTOM-ART project (Grant agreement ID: 952982) and Ministerio de Ciencia e Innovación, grant number PID2020-116719RB-C41, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Elimination of interface energy barriers using dendrimer polyelectrolytes with fractal geometry

  • Ros Costals, Eloi
  • Tom, Thomas
  • Ortega Villasclaras, Pablo Rafael
  • Martín García, Isidro
  • Maggi, Edoardo
  • Asensi López, José Miguel
  • Lopez Vidrier, Julià
  • Saucedo Silva, Edgardo Ademar
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
In this work we study conjugated polyelectrolyte (CPE) films based on polyamidoamine (PAMAM) dendrimers of generations G1 and G3. These fractal macromolecules are compared to branched polyethylenimine (b-PEI) polymer using methanol as the solvent. All of these materials present a high density of amino groups, which protonated by methoxide counter-anions create strong dipolar interfaces. The vacuum level shift associated to these films on n-type silicon was 0.93 eV for b-PEI, 0.72 eV for PAMAM G1 and 1.07 eV for PAMAM G3. These surface potentials were enough to overcome Fermi level pinning, which is a typical limitation of aluminium contacts on n-type silicon. A specific contact resistance as low as 20 mO·cm2 was achieved with PAMAM G3, in agreement with the higher surface potential of this material. Good electron transport properties were also obtained for the other materials. Proof-of-concept silicon solar cells combining vanadium oxide as a hole-selective contact with these new electron transport layers have been fabricated and compared. The solar cell with PAMAM G3 surpassed 15% conversion efficiency with an overall increase of all the photovoltaic parameters. The performance of these devices correlates with compositional and nanostructural studies of the different CPE films. Particularly, a figure-of-merit (Vs) for CPE films that considers the number of protonated amino groups per macromolecule has been introduced. The fractal geometry of dendrimers leads to a geometric increase in the number of amino groups per generation. Thus, investigation of dendrimer macromolecules seems a very good strategy to design CPE films with enhanced charge-carrier selectivity., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement no. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE), by the Spanish Ministry of Science, Innovation and Universities under the MATERONE project (PID2020-116719RB-C41) as well as PID2019- 109215RB-C43 and PID2019-109215RB-C41. E.S. also thanks the ICREA Academia Program. One of the authors (T. Tom) acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456). This work is also part of projects PID2020-115719RB-C21 (GETPV) and TED2021-131778B (TROPIC) funded b y MCIN/AEI/10.13039/ 5011000110033. Project TED2021-131778B (TROPIC) is also funded by European Union “NextGenerationEU”/PRTR.″, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption

  • Lopez-Garcia, Alex J.
  • Voz Sánchez, Cristóbal
  • Asensi López, José Miguel
  • Puigdollers i González, Joaquim
  • Izquierdo Roca, Víctor
  • Perez Rodriguez, Alejandro
This is the peer reviewed version of the following article: Lopez-Garcia, A. [et al.]. Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption. "Solar RRL", April 2023, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/solr.202200928. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., Herein, the fabrication of transparent solar cells based on nanometric (8 and30 nm) intrinsic hydrogenated amorphous siliconfilms (a-Si:H) and using oxidethinfilms as transparent carrier selective contacts are reported. The ultrathindevices present photovoltaic effect and high average visible transmittance (AVT).Additionally, they display a shifted spectral response toward short wavelengths.Glass/fluorine-doped tin oxide (FTO)/aluminum-doped zinc oxide (AZO)/a-Si:H/MoO3/indium tin oxide (ITO) prototypes are shown, presenting AVT=35% andphotovoltaic conversion efficiency (PCE)=2% for a device with a 30 nm a-Si:Hfilm. This yields a light utilization efficiency (LUE) of 0.7%, a record up to this datefor inorganic oxide-based transparent solar cells. For devices including an 8 nma-Si:Hfilm, the AVT reaches 66% with a PCE=0.6% (LUE=0.4%). These highAVT values are comparable or even superior in some cases to those achieved forpure oxide devices. Thesefindings confirm the potential of the proposedarchitectures for the development of highly transparent energy harvesters asfunctional components in building-integrated photovoltaics (BIPV), agrophoto-voltaics (APV), sensors and other low-power devices. In addition, these devicesare fabricated with earth-abundant materials and with up-scalable techniquesthat can allow for a feasible implementation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Photovoltaics in UPC Bachelor’s degree in Electronic Engineering

  • Silvestre Bergés, Santiago
  • Torres Torres, Francisco
This study delineates the curriculum covering the instruction of photovoltaic (PV) solar energy within the Electronic Telecommunications Engineering Bachelor's Degree at the Barcelona School of Telecommunications Engineering (ETSETB), part of the Polytechnic University of Catalonia (UPC). This program commenced during the academic year 2018-2019 at the ETSETB. The curriculum comprises three courses dedicated to the study of PV solar energy within the program. A compulsory course: Electric Power Processing (6 ECTS), and two elective courses: Photovoltaic devices (6 ECTS) and Photovoltaic Solar Energy (2 ECTS)., This work has received funding from the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41)., Peer Reviewed, Postprint (published version)