Pasar al contenido principal

SIMULACION ELECTRICA DE DISPOSITIVOS Y SISTEMAS MEMRISTIVOS CONVENCIONALES Y NO CONVENCIONALES PARA COMPUTACION NEUROMORFICA

PID2022-139586NB-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mesoscopic Theory of Resistive Switching

  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
The quantum nature of filamentary-type resistive switching (RS) occurring in thin oxide films has been investigated for more than two decades and though the key concepts for a mesoscopic theory of RS are well known, establishing a simple phenomenological model consistent with the experimental observations has proven to be an elusive task. The physics of RS is complex because it involves the coupled action of electrons and ions or vacancies, a connection which gives rise to the hysteretic behavior of the conduction characteristic of the device. In this letter, a model based on the Landauer approach for the electron transport through a narrow constriction is revisited and combined with the master equation for the generation and dissolution of a nanosized gap. The proposed model not only sheds light on one of the most widely invoked equations for conduction in RS devices (Stanford-PKU RRAM model) but also provides the physical meaning of its parameters. The role played by the power dissipation at the two ends of the constriction during the occurrence of the switching process is also discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling and Simulation of Correlated Cycle-to-Cycle Variability in the Current-Voltage Hysteresis Loops of RRAM Devices

  • Salvador Aguilera, Emili|||0000-0002-1613-6784
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Rodriguez, R.|||0000-0002-4565-6703
  • Miranda, E.|||0000-0003-0470-5318
Resistive RAMs or memristors are nowadays considered serious candidates for the implementation of energy efficient and scalable neuromorphic computing systems. However, a major drawback of this technology is the instability of the device current-voltage (I-V) characteristic as is clearly revealed by the so-called cycle-to-cycle (C2C) variability. This lack of complete reproducibility is a consequence of the spontaneous or induced morphological changes of the filamentary conducting structure occurring at atomic level. Variability is an essential issue any compact model for the conduction characteristics of RRAM devices should be able to cope with to be considered realistic. In this work, a thorough investigation of the C2C variability in the I-V loops of HfO-based memristive structures was carried out with the aim of incorporating this information into the equations of the Dynamic Memdiode Model. From the compact modeling viewpoint, C2C correlation effects are achieved using model parameters expressed as mean-reverting stochastic processes driven by Wiener noise (Ornstein-Uhlenbeck process). The direct and indirect links between the random behavior of the model parameters and the observable magnitudes (high and low resistance states, set and reset voltages, etc.) are discussed. The agreement between simulation and experimental results is statistically assessed using the Wasserstein's distance metric.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Revealing the quantum nature of the voltage-induced conductance changes in oxygen engineered yttrium oxide-based RRAM devices

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Piros, Eszter|||0000-0001-8714-9059
  • Kaiser, Nico|||0000-0002-5644-890X
  • Vogel, Tobias|||0000-0003-0720-0681
  • Petzold, Stefan|||0000-0002-4994-9781
  • Gehrunger, Jonas|||0000-0002-0585-7893
  • Hochberger, Christian|||0000-0001-5516-7826
  • Oster, T.
  • Hofmann, K.|||0000-0002-6675-0221
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
  • Alff, Lambert|||0000-0001-8185-4275
In this work, the quasi-analog to discrete transition occurring in the current-voltage characteristic of oxygen engineered yttrium oxide-based resistive random-access memory (RRAM) devices is investigated in detail. In particular, the focus of our research is not on the absolute conductance values of this characteristic but on the magnitude of its conductance changes occurring during the reset process of the device. It is found that the detected changes correspond to conductance values predominantly of the order of the quantum unit of conductance G = 2 e 2 / h, where e is the electron charge and h the Planck constant. This feature is observed even at conductance levels far above G , i.e. where electron transport is seemingly diffusive. It is also observed that such behavior is reproducible across devices comprising yttrium oxide layers with different oxygen concentrations and measured under different voltage sweep rates. While the oxygen deficiency affects the total number of quantized conductance states, the magnitude of the changes in conductance, close to 1 G , is invariant to the oxygen content of the functional layer.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of the Voltage Ramp Rate Effects on the Programming Characteristics of Bipolar-Type Memristive Devices

  • Miranda, E.|||0000-0003-0470-5318
  • Piros, Eszter|||0000-0001-8714-9059
  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Kim, Taewook
  • Schreyer, Philipp|||0000-0002-7200-3855
  • Gehrunger, Jonas|||0000-0002-0585-7893
  • Schwarz, Tobias
  • Oster, Timo|||0000-0003-1501-2795
  • Hofmann, Klaus|||0000-0002-6675-0221
  • Suñé, Jordi|||0000-0003-0108-4907
  • Hochberger, Christian|||0000-0001-5516-7826
  • Alff, Lambert|||0000-0001-8185-4275
We investigate in this letter the role the voltage ramp rate plays in the conduction and programming characteristics of bipolar-type memristive devices. It is shown that speeding up the writing or erasing process of a memristor is beneficial in terms of energy consumption but has a side cost associated with power dissipation. This happens because of the dynamical aspects of the set and reset transitions which are ultimately dictated by the physics of metal ions and oxygen vacancies migration. It is shown that by adding a constant base voltage to the voltage sweep, shorter programming times can be achieved but no significant impact on the power dissipation-energy consumption relationship is observed. Modeling and simulations are carried out with the aid of the Dynamic Memdiode Model and its implementation in LTspice using the Method of Elementary Solvers. Since the device model parameters and simulation conditions can vary in a wide range, the complete schematics are provided so that the interested readers can test different casuistries by themselves.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reliability assessment of optical physical unclonable functions based on the spatial distribution of catastrophic failure sites in MIM structures

  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Solis, Alvaro
  • Calatayud, Alex
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Miranda, E.|||0000-0003-0470-5318
Catastrophic failure sites, also referred to as breakdown spots, in Metal-Insulator-Semiconductor (MIS) and Metal-Insulator-Metal (MIM) structures are the consequence of the formation of conducting paths across the thin oxide film that separates the contact electrodes. When the energy released by the sudden occurrence of this kind of shorts is high enough, the events are clearly detected in the top area of the structure as a random spatial point pattern. As it was demonstrated in previous works, the distribution of failure sites obtained this way can be used to generate optically detectable cryptographic keys in the context of Physically Unclonable Functions (PUFs). In this paper, we pay special attention to the reliability of the associated fingerprints. Reliability is evaluated in terms of a number of features of the binarized images such as the rotation and translation of the observation window, resolution, illumination, noise conditions, and particularities of the used optical system. The obtained results demonstrate that the generated fingerprints meet the essential requirements of reliability, reaching values between ~90 and 99% in all the considered scenarios. By means of a simulated experiment, which closely resembles the practical application of the proposed method, we are able to assess how good the identification of the registered images is and therefore the feasibility of the considered approach. To complete the picture, the investigated PUFs are shown to be resilient to temperature and electrical stress attacks which makes them highly suitable for security applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hysteresis in memristors produces conduction inductance and conduction capacitance effects

  • Bisquert, Juan|||0000-0003-4987-4887
  • Roldán, Juan B.|||0000-0003-1662-6457
  • Miranda, E.|||0000-0003-0470-5318
Memristors are devices in which the conductance state can be alternately switched between a high and a low value by means of a voltage scan. In general, systems involving a chemical inductor mechanism as solar cells, asymmetric nanopores in electrochemical cells, transistors, and solid state memristive devices, exhibit a current increase and decrease over time that generates hysteresis. By performing small signal ac impedance spectroscopy, we show that memristors, or any other system with hysteresis relying on the conductance modulation effect, display intrinsic dynamic inductor-like and capacitance-like behaviours in specific input voltage ranges. Both the conduction inductance and the conduction capacitance originate in the same delayed conduction process linked to the memristor dynamics and not in electromagnetic or polarization effects. A simple memristor model reproduces the main features of the transition from capacitive to inductive impedance spectroscopy spectra, which causes a nonzero crossing of current-voltage curves. Memristors display hysteresis effects in the form of self-crossing looping current-voltage curves. We show intrinsic dynamic inductor-like (conduction inductance) and capacitance-like (conduction capacitance) behaviours.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Behavioral SPICE model for memristive crosspoint arrays operating in the nonlinear transport regime

  • Pérez, X.
  • Picos, Rodrigo|||0000-0002-9167-6422
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
In this letter, a fully behavioral SPICE model for M × N memristive crosspoint arrays (CPAs) is presented. The proposed approach incorporates the current-voltage characteristics of the memdiode model for resistive switching devices, which can account for both the linear (low-voltage) and nonlinear (high-voltage) transport regimes of memristors. At low voltages, the model coincides with the conventional linear formulation based on matrix-vector multiplication (MVM) method. At high voltages, however, this algebraic operation is no longer valid. The model supports two operation modes depending on the requirements of the surrounding circuitry: voltage-controlled current source (VCCS) and voltage-controlled voltage source (VCVS). Current-controlled modes are also feasible for specific applications. Basic guidelines for applying these different modes are provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Trap-Controlled Conduction and Metal-Insulator Transition in Superconducting Cuprate Memristors

  • Günkel, Thomas
  • Miranda, E.|||0000-0003-0470-5318
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Palau, Anna|||0000-0002-2217-164X
  • Suñé, Jordi|||0000-0003-0108-4907
Memristive devices based on high-temperature superconducting cuprates offer promising routes for neuromorphic computing, yet the microscopic mechanisms governing their resistive switching remain unclear. Here we investigate YBa2Cu3O7-δ (YBCO) memristors across 80-300 K, revealing robust bipolar switching between high- and low-resistance states with temperature-independent SET and RESET voltages. Current- voltage analysis shows both states follow trap-controlled spacecharge-limited conduction, modulated by shallow and deep trap states at an oxygen-deficient interfacial YBCO layer. A key enabler of this behavior is the formation of a deoxygenated layer beneath the top contact, which acts as a dynamic trap region and allows electrostatic control over a field-induced metal-insulator transition. We propose a dual-trap model where deep traps linked to CuO chain fragmentation stabilize a field-induced metal-insulator transition, enabling nonvolatile switching. These insights elucidate the role of trap dynamics in cuprate memristors and highlight their potential for cryogenic neuromorphic platforms compatible with superconducting computing architectures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spectral-Energy Trade-Offs in Memristor Programming Using Generalized Gaussian Voltage Pulses

  • Miranda, E.|||0000-0003-0470-5318
  • Piros, Eszter|||0000-0001-8714-9059
  • Kim, T.
  • Schreyer, Philipp|||0000-0002-7200-3855
  • Gehrunger, Jonas|||0000-0002-0585-7893
  • Oster, T.
  • Suñé, Jordi|||0000-0003-0108-4907
  • Hochberger, Christian|||0000-0001-5516-7826
  • Alff, Lambert|||0000-0001-8185-4275
This work investigates the spectral and energetic aspects of memristor programming using generalized Gaussian voltage pulses. Unlike conventional square or triangular waveforms, generalized Gaussian pulses enable precise control over both temporal shape and frequency content through a tunable shape parameter. By systematically varying the pulse's effective width and sharpness, we analyze the resulting current response and its dependence on the memristor's nonlinear and memory-driven dynamics. SPICE simulations reveal how pulse shaping directly affects the spectral distribution, instantaneous power consumption, total programming energy, and programming time. The results highlight key trade-offs among frequency-domain characteristics, pulse amplitude, and energy efficiency, providing practical design guidelines for energy-aware memristive programming. Controlling the frequency spectrum in memristive circuits is critical to preventing parasitic elements in wires and devices from introducing additional signal distortion, which could compromise the accuracy and reliability of in-memory operations. These findings have potential implications for low-power neuromorphic computing, analog signal modulation, and waveform-optimized memory architectures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization and simulation of the resistance window variability in Ti/HfO2-based memristors, effect of the Ti layer thickness

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • González, M. B.
  • Miranda, E.|||0000-0003-0470-5318
The low- and high-resistance states in Ti/HfO-based memristors were investigated. The statistical analysis of experimental data was carried out with the aid of the fitdistrplus package for the R language and the obtained results were considered in SPICE simulations using the Dynamic Memdiode Model for resistive switching devices. It was found that devices with a large thickness ratio t/t ≥ 0.5 exhibit superior performance in terms of switching stability, variability, and magnitude of the resistance window compared with those with a lower ratio. These observations shed light on the role played by the Ti capping layer in the switching performance of practical memristors, a crucial issue for the potential application of these devices in fields such as information storage and neuromorphic computing.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Impact of the Ti/HfO2 Thickness Ratio on the Resistive Switching Characteristics of Memristive Devices

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Miranda, E.|||0000-0003-0470-5318
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
This work investigates the impact of the Ti thickness on the resistive switching behavior of Ti/HfO-based memristors, with particular focus on the Ti-to-HfO thickness ratio (t/t). Understanding the interplay between the Ti layer and the switching dynamics of the devices is crucial for enhancing their performance and opening up new opportunities for advanced applications. This paper provides a comprehensive analysis of how a modification of the (t/t) ratio affects the Resistive Switching characteristics of the devices. The reported results allow us to identify the optimal conditions required to achieve enhanced memristor functionality, which is essential for applications such as data storage and neuromorphic computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrical stress-induced damage in TiN/Ti/HfO2/W memristors, The critical role of voltage polarity and vacuum condition

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Solé, L.
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Miranda, E.|||0000-0003-0470-5318
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
In this work, we investigate the damage caused by the catastrophic breakdown of the insulating layer in TiN/Ti/HfO2/W memristors when subjected to ramped voltage stress. Our analysis includes physical and compositional examinations of the damaged regions using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy. These techniques are complemented by in situ SEM current-voltage (I-V) measurements performed under vacuum conditions. In particular, we explored the connection of the applied voltage polarity with the damage onset. We show that high negative voltages applied to the TiN top electrode typically result in worm-like damage patterns. This specific type of damage, along with more severe stages of degradation such as disconnection and melting, is exclusively observed for negative biases and does not occur under vacuum conditions. Conversely, under positive voltage stress, no damage is detected in the top electrode of the devices irrespective of the external conditions. These results highlight the critical role of vacuum in controlling redox-driven compositional changes and preventing catastrophic damage. By systematically analyzing the effects of voltage polarity and ambient conditions, this study provides key insights into damage generation mechanisms. The obtained results pave the way for enhancing the lifetime, reliability, and robustness of memristive technologies for their use in emerging applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling and Simulation of Hysteron Dynamics in HfO2-Based Memristive Devices

  • Miranda, E.|||0000-0003-0470-5318
  • García, H.|||0000-0003-1329-8806
  • Vinuesa, G.|||0000-0003-0389-3409
  • Suñé, Jordi|||0000-0003-0108-4907
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Castán, Helena|||0000-0002-3874-721X
  • Dueñas, S.|||0000-0002-2328-1752
Published studies on memristive devices primarily focus on the conventional current-voltage major hysteresis loop, often overlooking the switching dynamics that emerge under controlled amplitude excitation. The resulting major and minor loops, often referred to as hysterons, provide a more stringent benchmark for model validation, while also offering deeper insight into the key physical mechanisms governing resistive switching. In this work, hysteron behavior in HfO₂-based memristive devices is analyzed within the framework of the Dynamic Memdiode Model (DMM). Hysterons are particularly relevant for neuromorphic computing, as they encode synaptic weights. Both experimental and modeling results indicate that the switching dynamics are predominantly governed by the applied voltage, whereas thermal effects associated with dissipation in the conductive filament appear to play a secondary role or remain implicit within the proposed description. Overall, these findings demonstrate that the DMM provides a robust and effective framework for the analysis and compact modeling of memristive devices. An updated LTspice implementation of the DMM is provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SPICE-Compatible Compact Modeling of Cuprate-Based Memristors Across a Wide Temperature Range

  • Günkel, Thomas
  • Barrera Català, Aleix|||0000-0002-7146-0026
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Miranda, E.|||0000-0003-0470-5318
  • Palau, Anna|||0000-0002-2217-164X
  • Suñé, Jordi|||0000-0003-0108-4907
Cryogenic memristors based on the high-temperature superconductor (Formula presented.) offer significant potential as nonvolatile memory elements or unit cell for analog artificial neural networks for future applications such as control units for quantum processors, cryogenic data centers or space-related electronics. In this work, the experimental switching capabilities of cuprate-based memristors are analyzed in terms of the material-specific physics. This work investigates the experimental switching behavior of cuprate-based memristors across temperatures from cryogenic to room temperature. The underlying interpretation, namely the trapping of injected charge carriers at a metal interface and field-induced detrapping, is incorporated into a physically inspired compact model. The core equations of this model consist of a differential balance equation and a current equation, which is derived from space-charge limited conduction. Comparison with experimental data shows that the model successfully reproduces the key features of the measured switching behavior across a wide temperature range, spanning from 80 to 300 K. Additionally, we implement the model in SPICE, enabling circuit-level simulations. The resulting compact model provides a useful framework for guiding experimental studies, capturing key features of the switching behavior, and bridging the gap between device-level characterization and circuit-level design.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and simulation of successive breakdown events in thin gate dielectrics using standard reliability growth models

  • Miranda, E.
  • Aguirre, F. L.
  • Salvador, E.
  • González, Mireia
  • Campabadal, Francesca
  • Suñé, J.
The application of constant electrical stress to a metal–insulator-semiconductor (MOS) or metal–insulator-metal (MIM) structure can generate multiple breakdown events in the dielectric film. Very often, these events are detected as small jumps in the current–time characteristic of the device under test and can be treated from the stochastic viewpoint as a counting process. In this letter, a wide variety of standard reliability growth models for this process are assessed in order to determine which option provides the best simulation results compatible with the experimental observations. For the generation of the breakdown event arrivals, two alternative stochastic methods for the power-law Poisson process are investigated: first, the inversion algorithm for the cumulative distribution function and second, an on-the-fly method based on the so-called rejection algorithm. Though both methods are equivalent, the first one is more appropriate for data analysis using spreadsheet calculations while the second one is highly suitable for circuit simulation environments like LTSpice. The connection of the selected nonhomogeneous Poisson process with the Weibull model for dielectric breakdown is also discussed., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A thorough investigation of the switching dynamics of TiN/Ti/10 nm-HfO2/W resistive memories

  • Maldonado, D.
  • Vinuesa, G.
  • Aldana, S.
  • Aguirre, F. L.
  • Cantudo, A.
  • García, H.
  • González, M.
  • Jiménez-Molinos, F.
  • Campabadal, Francesca
  • Miranda, E.
  • Dueñas, S.
  • Castán, H.
  • Roldán, J. B.
The switching dynamics of TiN/Ti/HfO<inf>2</inf>/W-based resistive memories is investigated. The analysis consisted in the systematic application of voltage sweeps with different ramp rates and temperatures. The obtained results give clear insight into the role played by transient and thermal effects on the device operation. Both kinetic Monte Carlo simulations and a compact modeling approach based on the Dynamic Memdiode Model are considered in this work with the aim of assessing, in terms of their respective scopes, the nature of the physical processes that characterize the formation and rupture of the filamentary conducting channel spanning the oxide film. As a result of this study, a better understanding of the different facets of the resistive switching dynamics is achieved. It is shown that the temperature and, mainly, the applied electric field, control the switching mechanism of our devices. The Dynamic Memdiode Model, being a behavioral analytic approach, is shown to be particularly suitable for reproducing the conduction characteristics of our devices using a single set of parameters for the different operation regimes., This work was supported by the Spanish Ministry of Science and Innovation and FEDER program [ PID2022-139586NB-C41 , PID2022-139586NB-C42 , PID2022-139586NB-C43 , PID2022-139586NB-C44 ], the Consejería de Conocimiento, Investigación y Universidad, Junta de Andalucía (Spain) [ B-TIC-624-UGR20 ] and the Spanish Consejo Superior de Investigaciones Científicas ( CSIC ) [ 20225AT012 ], with support of FEDER funds. M. B. G. acknowledges the Ramón y Cajal grant number RYC2020-030150-I . E.M and F.A. acknowledge the support from the European project MEMQuD, code 20FUN06, which has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and Simulation of Correlated Cycle-to-Cycle Variability in the Current-Voltage Hysteresis Loops of RRAM Devices

  • Salvador, E.
  • González, M.
  • Campabadal, Francesca
  • Rodriguez, R.
  • Miranda, E.
Resistive RAMs or memristors are nowadays considered serious candidates for the implementation of energy efficient and scalable neuromorphic computing systems. However, a major drawback of this technology is the instability of the device current-voltage (I-V) characteristic as is clearly revealed by the so-called cycle-to-cycle (C2C) variability. This lack of complete reproducibility is a consequence of the spontaneous or induced morphological changes of the filamentary conducting structure occurring at atomic level. Variability is an essential issue any compact model for the conduction characteristics of RRAM devices should be able to cope with to be considered realistic. In this work, a thorough investigation of the C2C variability in the I-V loops of HfO<inf>2</inf>-based memristive structures was carried out with the aim of incorporating this information into the equations of the Dynamic Memdiode Model. From the compact modeling viewpoint, C2C correlation effects are achieved using model parameters expressed as mean-reverting stochastic processes driven by Wiener noise (Ornstein-Uhlenbeck process). The direct and indirect links between the random behavior of the model parameters and the observable magnitudes (high and low resistance states, set and reset voltages, etc.) are discussed. The agreement between simulation and experimental results is statistically assessed using the Wasserstein's distance metric., Funding text 1 ACKNOWLEDGMENT This work was supported in part by Spanish MCIN/AEI /10.13039/501100011033/FEDER under projects PID2019-103869RB-C32, PID2022-139586NB-C41 and PID2022-139586NB-C42. The authors thank CSIC funding through project 20225AT012. E.S. acknowledges the Departament de Recerca I Universitats de la Generalitat de Catalunya for the 2020FISDU00261 scholarship. M.B.G. acknowledges the Ram\u00F3n y Cajal grant No. RYC2020-030150-I. Funding text 2 The work of author E. Salvador was supported by Departament de Recerca I Universitats de la Generalitat de Catalunya under 2020FISDU00261 scholarship. The work of author M.B. Gonzalez was supported by Ram\u00F3n y Cajal under Grant RYC2020-030150-I. This work was supported in part by Spanish MCIN/AEI/10.13039/501100011033/FEDER under Project PID2019-103869RB-C32, Project PID2022-139586NB-C41, and Project PID2022-139586NB-C42, and in part by CSIC funding under Project 20225AT012., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Event-Driven Stochastic Compact Model for Resistive Switching Devices

  • Sune, J.
  • Bargallo-Gonzalez, Mireia
  • Saludes, Mercedes
  • Campabadal, Francesca
  • Miranda, E.
A stochastic compact model for resistive switching (RS) devices is presented. The motivation is twofold: first, introducing variability in a natural way, and second, accounting for the discrete jumps of conductance observed during set and reset transitions. The model is based on an event generation rate, and it is an 'on-the-fly' procedure because events are randomly generated as the simulation proceeds in time. For the generation of events, we assume a mixed nonhomogeneous Poisson process (NHPP). Before considering RS, we deal with the generation of successive breakdown (BD) events in metal-insulator-semiconductor structures. This confirms the validity of the approach by comparing it with experimental data in which discrete events are evident. To deal with RS, we transform a previous compact model into a stochastic model. Comparison with experiments in TiN/Ti/HfO2/W devices shows the validity of the approach. Current-voltage loops and potentiation-depression transients in pulsed experiments are captured with a single set of parameters. Moreover, the model is an adequate framework to deal with both cycle-to-cycle and device-to-device variability., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades (MCIN)/Agencia Española de Investigación (AEI)/10.13039/501100011033 under Project PID2022-139586NB-C41 and Project PID2022-139586NB-C42 and in part by the Generalitat de Catalunya-Agència de Gestió d’Ajudes Universitàries i d’Investigació (AGAUR) under Project 2021 SGR 00497 and Project SGR 2021 00199. The work of J. Suñé and E. Miranda was supported in part by European Project MEMQuD funded by the European Metrology Programme for Innovation and Research (EMPIR) Program (Euramet) under Grant 20FUN06 and in part by the Participating States and European Union’s Horizon 2020 Program. The work of M. Bargalló-González was supported in part by the Consejo Superior de Investigaciones Científicas (CSIC) funding through under Project 20225AT012, in part by MCIN/AEI/10.13039/501100011033 under Grant RYC2020-030150-I, and in part by the “European Social Fund (ESF) Investing in your future.” The work of M. Saludes and F. Campabadal was supported by CSIC funding through under Project 20225AT012., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical stress-induced damage in TiN/Ti/HfO2/W memristors: The critical role of voltage polarity and vacuum condition

  • Saludes-Tapia, M.
  • Campabadal, F.
  • Solé, L.
  • Borrisé, Xavier
  • Miranda, E.
  • Bargallo, Mireia
In this work, we investigate the damage caused by the catastrophic breakdown of the insulating layer in TiN/Ti/HfO<inf>2</inf>/W memristors when subjected to ramped voltage stress. Our analysis includes physical and compositional examinations of the damaged regions using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy. These techniques are complemented by in situ SEM current-voltage (I-V) measurements performed under vacuum conditions. In particular, we explored the connection of the applied voltage polarity with the damage onset. We show that high negative voltages applied to the TiN top electrode typically result in worm-like damage patterns. This specific type of damage, along with more severe stages of degradation such as disconnection and melting, is exclusively observed for negative biases and does not occur under vacuum conditions. Conversely, under positive voltage stress, no damage is detected in the top electrode of the devices irrespective of the external conditions. These results highlight the critical role of vacuum in controlling redox-driven compositional changes and preventing catastrophic damage. By systematically analyzing the effects of voltage polarity and ambient conditions, this study provides key insights into damage generation mechanisms. The obtained results pave the way for enhancing the lifetime, reliability, and robustness of memristive technologies for their use in emerging applications., This work was supported through Grant Nos. PID2022-139586NB-C41 and PID2022-139586NB-C42, funded by MICIU/AEI/10.13039/501100011033 and FEDER, EU; the project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033 and by the European Union through the Next Generation EU/PRTR program; and CSIC funding through project 20225AT012. Additional support was received from the Generalitat de Catalunya-AGAUR through project 2021 SGR 00497., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Trap-Controlled Conduction and Metal−Insulator Transition in Superconducting Cuprate Memristors

  • Günkel, Thomas
  • Miranda, Enrique
  • Balcells, Lluís
  • Mestres, Narcís
  • Palau, Anna
  • Suñé, Jordi
Memristive devices based on high-temperature superconducting cuprates offer promising routes for neuromorphic computing, yet the microscopic mechanisms governing their resistive switching remain unclear. Here we investigate YBa2Cu3O7−δ (YBCO) memristors across 80–300 K, revealing robust bipolar switching between high- and low-resistance states with temperature-independent SET and RESET voltages. Current–voltage analysis shows both states follow trap-controlled space-charge-limited conduction, modulated by shallow and deep trap states at an oxygen-deficient interfacial YBCO layer. A key enabler of this behavior is the formation of a deoxygenated layer beneath the top contact, which acts as a dynamic trap region and allows electrostatic control over a field-induced metal–insulator transition. We propose a dual-trap model where deep traps linked to CuO chain fragmentation stabilize a field-induced metal–insulator transition, enabling nonvolatile switching. These insights elucidate the role of trap dynamics in cuprate memristors and highlight their potential for cryogenic neuromorphic platforms compatible with superconducting computing architectures., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033/through CHIST-ERA PCI2021-122028-2A cofinanced by the European Union Next Generation EU/PRTR, the “Severo Ochoa” Programme for Centres of Excellence CEX2023-001263-S, HTSUPERFUN PID2021-124680OB-I00 and HTS-4ICT PID2024-156025OB-I00, cofinanced by ERDF A way of making Europe. The Spanish Nanolito networking project (RED2022-134096-T). The European COST Action SUPERQUMAP (CA 21144). E.M. and J.S. would like to thank the support the Spanish Ministerio de Ciencia e Innovación (MCIN)/Agencia Española de investigación (AEI) 10.13039/501100011 033 (Under project No. PID2022-139586NB-C41). T.G. acknowledge support from AGAUR Catalan Government Predoctoral Fellowship (2022 FISDU 00115). J.S. and E.M. acknowledge the support of EU through the HORIZON Chips-JU 101194172 NeAIxt Project and the Agencia Española de Investigación (AEI)/10.13039/501100011033 under Project PCI2025-163216. The authors acknowledge the Scientific Services at ICMAB and the UAB PhD program in Materials Science., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac|||0009-0005-5699-466X
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel|||0000-0002-0890-0842
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • de Benito, Carola
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
  • de Benito, Carola
  • Llorca Piqué, Jordi
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling and simulation of successive breakdown events in thin gate dielectrics using standard reliability growth models

  • Miranda, E.|||0000-0003-0470-5318
  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Salvador, E.
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
The application of constant electrical stress to a metal-insulator-semiconductor (MOS) or metal-insulator-metal (MIM) structure can generate multiple breakdown events in the dielectric film. Very often, these events are detected as small jumps in the current-time characteristic of the device under test and can be treated from the stochastic viewpoint as a counting process. In this letter, a wide variety of standard reliability growth models for this process are assessed in order to determine which option provides the best simulation results compatible with the experimental observations. For the generation of the breakdown event arrivals, two alternative stochastic methods for the power-law Poisson process are investigated: first, the inversion algorithm for the cumulative distribution function and second, an on-the-fly method based on the so-called rejection algorithm. Though both methods are equivalent, the first one is more appropriate for data analysis using spreadsheet calculations while the second one is highly suitable for circuit simulation environments like LTSpice. The connection of the selected nonhomogeneous Poisson process with the Weibull model for dielectric breakdown is also discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Simple, Robust, and Versatile MATLAB Formulation of the Dynamic Memdiode Model for Bipolar-Type Resistive Random Access Memory Devices

  • Salvador Aguilera, Emili|||0000-0002-1613-6784
  • Rodriguez, R.|||0000-0002-4565-6703
  • Miranda, E.|||0000-0003-0470-5318
Modeling in an emerging technology like RRAM devices is one of the pivotal concerns for its development. In the current bibliography, most of the models face difficulties in implementing or simulating unconventional scenarios, particularly when dealing with complex input signals. In addition, circuit simulators like Spice require long running times for high-resolution results because of their internal mathematical implementation. In this work, a fast, simple, robust, and versatile model for RRAM devices built in MATLAB is presented. The proposed model is a recursive and discretized version of the dynamic memdiode model (DMM) for bipolar-type resistive switching devices originally implemented in LTspice. The DMM model basically consists of two coupled equations: one for the current (non-linear current generator) and a second one for the memory state of the device (time-dependent differential equation). This work presents an easy-to-use tool for researchers to reproduce the experimental behavior of their devices and predict the outcome from non-trivial experiments. Three study cases are reported, aimed at capturing different phenomenologies: a frequency effect study, a cycle-to-cycle variability fit, and a stochastic resonance impact analysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Event-Driven Stochastic Compact Model for Resistive Switching Devices

  • Suñé, Jordi|||0000-0003-0108-4907
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Miranda, E.|||0000-0003-0470-5318
A stochastic compact model for resistive switching (RS) devices is presented. The motivation is twofold: first, introducing variability in a natural way, and second, accounting for the discrete jumps of conductance observed during set and reset transitions. The model is based on an event generation rate, and it is an 'on-the-fly' procedure because events are randomly generated as the simulation proceeds in time. For the generation of events, we assume a mixed nonhomogeneous Poisson process (NHPP). Before considering RS, we deal with the generation of successive breakdown (BD) events in metal-insulator-semiconductor structures. This confirms the validity of the approach by comparing it with experimental data in which discrete events are evident. To deal with RS, we transform a previous compact model into a stochastic model. Comparison with experiments in TiN/Ti/HfO2/W devices shows the validity of the approach. Current-voltage loops and potentiation-depression transients in pulsed experiments are captured with a single set of parameters. Moreover, the model is an adequate framework to deal with both cycle-to-cycle and device-to-device variability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Method of Elementary Solvers in SPICE

  • Miranda, E.|||0000-0003-0470-5318
Circuit simulators are fundamentally used for solving electric circuit problems with different degrees of complexity in which node voltages and branch currents are the unknowns. This is fully understandable since they were originally created for this specific task. However, behind the curtains, powerful simulation engines based on a variety of numerical techniques operate so as to always comply with Kirchhoff's current and voltage laws. In this paper, it is shown how a simple circuital configuration, referred to as the elementary solver, consistent in two behavioral current sources in series, can be used to solve mathematical problems that go beyond electronics. Of course, the intention is not to substitute mathematical packages with well-proven calculus capacity but to increase the scope of circuit simulators for their application in other areas of research or simply for educational purposes. It is worth mentioning that no special programming skills are required (except a basic knowledge of the available tools and language) and, furthermore, that the user can operate exclusively in a graphical environment. It is shown, throughout a series of selected examples, how the method of elementary solvers (MES) works, providing a new and practical dimension to the applicability of circuit simulators.