Pasar al contenido principal

MODELADO Y SIMULACION FISICA DE DISPOSITIVOS MEMRISTIVOS

PID2022-139586NB-C44

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hysteresis in memristors produces conduction inductance and conduction capacitance effects

  • Bisquert, Juan|||0000-0003-4987-4887
  • Roldán, Juan B.|||0000-0003-1662-6457
  • Miranda, E.|||0000-0003-0470-5318
Memristors are devices in which the conductance state can be alternately switched between a high and a low value by means of a voltage scan. In general, systems involving a chemical inductor mechanism as solar cells, asymmetric nanopores in electrochemical cells, transistors, and solid state memristive devices, exhibit a current increase and decrease over time that generates hysteresis. By performing small signal ac impedance spectroscopy, we show that memristors, or any other system with hysteresis relying on the conductance modulation effect, display intrinsic dynamic inductor-like and capacitance-like behaviours in specific input voltage ranges. Both the conduction inductance and the conduction capacitance originate in the same delayed conduction process linked to the memristor dynamics and not in electromagnetic or polarization effects. A simple memristor model reproduces the main features of the transition from capacitive to inductive impedance spectroscopy spectra, which causes a nonzero crossing of current-voltage curves. Memristors display hysteresis effects in the form of self-crossing looping current-voltage curves. We show intrinsic dynamic inductor-like (conduction inductance) and capacitance-like (conduction capacitance) behaviours.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal Compact Modeling and Resistive Switching Analysis in Titanium Oxide-Based Memristors

  • Roldán, J.B.
  • Cantudo, A.
  • Maldonado, D.
  • Aguilera-Pedregosa, C.
  • Moreno, Eulalia
  • Swoboda, T.
  • Jiménez-Molinos, F.
  • Yuan, Y.
  • Zhu, K.
  • Lanza, M.
  • Muñoz Rojo, Miguel
Resistive switching devices based on the Au/Ti/TiO2/Au stack were developed. In addition to standard electrical characterization by means of I-V curves, scanning thermal microscopy was employed to localize the hot spots on the top device surface (linked to conductive nanofilaments, CNFs) and perform in-operando tracking of temperature in such spots. In this way, electrical and thermal responses can be simultaneously recorded and related to each other. In a complementary way, a model for device simulation (based on COMSOL Multiphysics) was implemented in order to link the measured temperature to simulated device temperature maps. The data obtained were employed to calculate the thermal resistance to be used in compact models, such as the Stanford model, for circuit simulation. The thermal resistance extraction technique presented in this work is based on electrical and thermal measurements instead of being indirectly supported by a single fitting of the electrical response (using just I-V curves), as usual. Besides, the set and reset voltages were calculated from the complete I-V curve resistive switching series through different automatic numerical methods to assess the device variability. The series resistance was also obtained from experimental measurements, whose value is also incorporated into a compact model enhanced version. © 2024 The Authors. Published by American Chemical Society., We acknowledge grant PID2022-139586NB-44 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, a way of making Europe. M.L. acknowledges the generous support from the Baseline funding scheme of the King Abdullah University of Science and Technology., Supporting information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal dependence of the current in TiN/Ti/HfO2/W memristors at different intermediate conduction states

  • Jiménez-Molinos, F.
  • Vinuesa, G.
  • García, H.
  • Dueñas, S.
  • Castán, H.
  • González, M. B.
  • Campabadal, Francesca
  • Roldán, J. B.
The dependence of the current in TiN/Ti/HfO2/W devices on the temperature is investigated in the range from 78 K to 340 K. Resistive switching cycles at 78 K are conducted to explore the thermal dependence in filament configurations with different intermediate resistance states. The less conductive states show an increase of the current as the temperature rises, while the fully formed filament displays a metallic-like behavior. A comprehensive model, based on the Stanford Model including a series resistance, is proposed and successfully validated by experimental data. The interplay between the ohmic and non-linear components in the model for different filament states is analyzed, emphasizing the dominance of the non-linear component (and its corresponding thermal dependence) in partially formed filaments and the prevalence of the ohmic component in the fully formed filament, which shows a decreasing current as the temperature rises. A complete compact model for simulation of circuits including the thermal dependence of these devices is developed., We acknowledge grants PID2022-139586NB-C42, PID2022-139586NB-C43, PID2022-139586NB-C44 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. IMB authors thank the CSIC funding through project 20225AT012 and the Generalitat de Catalunya- AGAUR for project 2021 SGR 00497. M.B.G. acknowledges the grant RYC2020-030150-I funded by MICIU/AEI/ 10.13039/501100011033 and by \u201CESF Investing in your future\u201D., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A thorough investigation of the switching dynamics of TiN/Ti/10 nm-HfO2/W resistive memories

  • Maldonado, D.
  • Vinuesa, G.
  • Aldana, S.
  • Aguirre, F. L.
  • Cantudo, A.
  • García, H.
  • González, M.
  • Jiménez-Molinos, F.
  • Campabadal, Francesca
  • Miranda, E.
  • Dueñas, S.
  • Castán, H.
  • Roldán, J. B.
The switching dynamics of TiN/Ti/HfO<inf>2</inf>/W-based resistive memories is investigated. The analysis consisted in the systematic application of voltage sweeps with different ramp rates and temperatures. The obtained results give clear insight into the role played by transient and thermal effects on the device operation. Both kinetic Monte Carlo simulations and a compact modeling approach based on the Dynamic Memdiode Model are considered in this work with the aim of assessing, in terms of their respective scopes, the nature of the physical processes that characterize the formation and rupture of the filamentary conducting channel spanning the oxide film. As a result of this study, a better understanding of the different facets of the resistive switching dynamics is achieved. It is shown that the temperature and, mainly, the applied electric field, control the switching mechanism of our devices. The Dynamic Memdiode Model, being a behavioral analytic approach, is shown to be particularly suitable for reproducing the conduction characteristics of our devices using a single set of parameters for the different operation regimes., This work was supported by the Spanish Ministry of Science and Innovation and FEDER program [ PID2022-139586NB-C41 , PID2022-139586NB-C42 , PID2022-139586NB-C43 , PID2022-139586NB-C44 ], the Consejería de Conocimiento, Investigación y Universidad, Junta de Andalucía (Spain) [ B-TIC-624-UGR20 ] and the Spanish Consejo Superior de Investigaciones Científicas ( CSIC ) [ 20225AT012 ], with support of FEDER funds. M. B. G. acknowledges the Ramón y Cajal grant number RYC2020-030150-I . E.M and F.A. acknowledge the support from the European project MEMQuD, code 20FUN06, which has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variability in HfO2-based memristors described with a new bidimensional statistical technique

  • Acal, C
  • Maldonado, D
  • Cantudo, A
  • González, M.
  • Jiménez-Molinos, F
  • Campabadal, Francesca
  • Roldán, J B
A new statistical analysis is presented to assess cycle-to-cycle variability in resistive memories. This method employs two-dimensional (2D) distributions of parameters to analyse both set and reset voltages and currents, coupled with a 2D coefficient of variation (CV). This 2D methodology significantly enhances the analysis, providing a more thorough and comprehensive understanding of the data compared to conventional one-dimensional methods. Resistive switching (RS) data from two different technologies based on hafnium oxide are used in the variability study. The 2D CV allows a more compact assessment of technology suitability for applications such as non-volatile memories, neuromorphic computing and random number generation circuits., Research supported by the projects PID2022-139586NB-C44, PID2022-139586NB-C42 and PID2020-113961GB-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU, and the \u201CMar\u00EDa de Maeztu\u201D Excellence Unit IMAG reference CEX2020-001105-M, funded by MCIN/AEI/10.13039/501100011033. IMB authors thank the CSIC funding through project 20225AT012, the Generalitat de Catalunya-AGAUR through project 2021 SGR 00497 and the support provided by the project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033, and by the European Union through the NextGenerationEU/PRTR program. M. B. G. acknowledges the grant RYC2020-030150-I funded by MCIN/AEI/ 10.13039/501100011033 and by \u201CESF Investing in your future\u201D., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Statistical, simulation and modeling analysis of variability in memristors with single and bilayer dielectrics of HfO2 and Al2O3, a comparison

  • Cantudo, A.
  • Jiménez-Molinos, F.
  • Ruiz, P. Q.
  • López, A.
  • Villena, M. A.
  • González, M.
  • Campabadal, Francesca
  • Roldán, J. B.
Variability is a key aspect of memristors that hinders their usage in massive commercial applications. This study investigates the cycle-to-cycle variability of resistive switching devices fabricated using three different dielectric configurations: two monolayer insulators (Al<inf>2</inf>O<inf>3</inf> or HfO<inf>2</inf>) or a HfO<inf>2</inf>/Al<inf>2</inf>O<inf>3</inf> bilayer. Thousands of resistive switching (RS) current-voltage (I-V) curves were measured under ramped voltage stress and the RS parameters were extracted using different numerical methodologies. The variability of the obtained RS parameters was analyzed using the conventional 1D coefficient of variation (σ/μ, where σ stands for the standard deviation and μ for the mean), as well as a recently introduced 2D coefficient of variation, providing a deeper insight into the joined variability of the switching voltages and currents. An enhanced version of the Stanford compact model was employed to model the experimental I-V curves, in addition to an analysis based on a 3D circuit breaker (CB) simulator, which incorporates thermal effects for controlling the switching of the CB. These two modeling approaches successfully captured the observed RS behavior and variability trends along the thousands of measured cycles and for the three considered technologies. Furthermore, the simulation study sheds light on how the different thermal properties of the studied technologies impact on the conductive filament evolution., Research supported by the projects PID2022-139586NB-C44, PID2022-139586NB-C42 funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. IMB authors thank the CSIC funding through project 20225AT012, the Generalitat de Catalunya-AGAUR through project 2021 SGR 00497 and the support provided by the project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033, and by the European Union through the NextGenerationEU/PRTR program. M.B.G. acknowledges the grant RYC2020-030150-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Life cycle assessment of digital memories: the memristor's environmental footprint

  • Benito, Nerea
  • Pérez Martínez, José Carlos
  • Roldán, Juan B.
  • Lao, Ángela
  • Urbina Yeregui, Antonio
  • Serrano-Luján, Lucía
Memristor technologies, pivotal in the evolution of energy-efficient digital devices, have the potential to revolutionize fields like non-volatile memories, hardware cryptography, neuromorphic computing and artificial intelligence acceleration. This study applies Life Cycle Assessment (LCA) methodology to analyse the environmental impact of five memristor designs, focusing on materials and manufacturing processes. The analysis adheres to ISO 14040–44 standards and employs the ReCiPe methodology to evaluate 18 environmental impact categories, emphasizing categories such as freshwater ecotoxicity and global warming potential. The results highlight significant variations in environmental impacts across the designs, largely attributed to differences in active layer materials and manufacturing processes. Molybdenum exhibits the highest impact, particularly in freshwater ecotoxicity, while SiO₂ demonstrates the lowest overall impact. Manufacturing processes like sputtering and photolithography carried out at laboratory scale contribute disproportionately to energy consumption and environmental damage, suggesting that upscaling production to industrial efficiencies is mandatory to mitigate these impacts. Furthermore, several materials required for memristor fabrication are listed as critical by the International Energy Agency (IEA), raising concerns about supply security, resource scarcity and environmental sustainability. This analysis serves as a foundational step for optimizing memristor technologies, balancing performance demands with environmental stewardship. To the best of our knowledge, this is the first comprehensive Life Cycle Assessment that compares multiple memristor architectures using real laboratory data and evaluates their environmental impacts. This work provides a methodological foundation for future sustainability assessments in the context of emerging memory technologies., Financial support is acknowledged from Agencia Estatal de Investigación-Ministerio de Ciencia e Innovación (AEI-MICINN, Spain) through grants TED2021-132368B-C21, PID2022-139586NB-C44 and TED2021-132368A-C22, including European Union funding NextGenerationEU.