Pasar al contenido principal

FABRICACION Y CARACTERIZACION DE DISPOSITIVOS MEMRISTIVOS

PID2022-139586NB-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling and Simulation of Correlated Cycle-to-Cycle Variability in the Current-Voltage Hysteresis Loops of RRAM Devices

  • Salvador Aguilera, Emili|||0000-0002-1613-6784
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Rodriguez, R.|||0000-0002-4565-6703
  • Miranda, E.|||0000-0003-0470-5318
Resistive RAMs or memristors are nowadays considered serious candidates for the implementation of energy efficient and scalable neuromorphic computing systems. However, a major drawback of this technology is the instability of the device current-voltage (I-V) characteristic as is clearly revealed by the so-called cycle-to-cycle (C2C) variability. This lack of complete reproducibility is a consequence of the spontaneous or induced morphological changes of the filamentary conducting structure occurring at atomic level. Variability is an essential issue any compact model for the conduction characteristics of RRAM devices should be able to cope with to be considered realistic. In this work, a thorough investigation of the C2C variability in the I-V loops of HfO-based memristive structures was carried out with the aim of incorporating this information into the equations of the Dynamic Memdiode Model. From the compact modeling viewpoint, C2C correlation effects are achieved using model parameters expressed as mean-reverting stochastic processes driven by Wiener noise (Ornstein-Uhlenbeck process). The direct and indirect links between the random behavior of the model parameters and the observable magnitudes (high and low resistance states, set and reset voltages, etc.) are discussed. The agreement between simulation and experimental results is statistically assessed using the Wasserstein's distance metric.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization and simulation of the resistance window variability in Ti/HfO2-based memristors, effect of the Ti layer thickness

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • González, M. B.
  • Miranda, E.|||0000-0003-0470-5318
The low- and high-resistance states in Ti/HfO-based memristors were investigated. The statistical analysis of experimental data was carried out with the aid of the fitdistrplus package for the R language and the obtained results were considered in SPICE simulations using the Dynamic Memdiode Model for resistive switching devices. It was found that devices with a large thickness ratio t/t ≥ 0.5 exhibit superior performance in terms of switching stability, variability, and magnitude of the resistance window compared with those with a lower ratio. These observations shed light on the role played by the Ti capping layer in the switching performance of practical memristors, a crucial issue for the potential application of these devices in fields such as information storage and neuromorphic computing.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Impact of the Ti/HfO2 Thickness Ratio on the Resistive Switching Characteristics of Memristive Devices

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Miranda, E.|||0000-0003-0470-5318
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
This work investigates the impact of the Ti thickness on the resistive switching behavior of Ti/HfO-based memristors, with particular focus on the Ti-to-HfO thickness ratio (t/t). Understanding the interplay between the Ti layer and the switching dynamics of the devices is crucial for enhancing their performance and opening up new opportunities for advanced applications. This paper provides a comprehensive analysis of how a modification of the (t/t) ratio affects the Resistive Switching characteristics of the devices. The reported results allow us to identify the optimal conditions required to achieve enhanced memristor functionality, which is essential for applications such as data storage and neuromorphic computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrical stress-induced damage in TiN/Ti/HfO2/W memristors, The critical role of voltage polarity and vacuum condition

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Solé, L.
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Miranda, E.|||0000-0003-0470-5318
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
In this work, we investigate the damage caused by the catastrophic breakdown of the insulating layer in TiN/Ti/HfO2/W memristors when subjected to ramped voltage stress. Our analysis includes physical and compositional examinations of the damaged regions using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy. These techniques are complemented by in situ SEM current-voltage (I-V) measurements performed under vacuum conditions. In particular, we explored the connection of the applied voltage polarity with the damage onset. We show that high negative voltages applied to the TiN top electrode typically result in worm-like damage patterns. This specific type of damage, along with more severe stages of degradation such as disconnection and melting, is exclusively observed for negative biases and does not occur under vacuum conditions. Conversely, under positive voltage stress, no damage is detected in the top electrode of the devices irrespective of the external conditions. These results highlight the critical role of vacuum in controlling redox-driven compositional changes and preventing catastrophic damage. By systematically analyzing the effects of voltage polarity and ambient conditions, this study provides key insights into damage generation mechanisms. The obtained results pave the way for enhancing the lifetime, reliability, and robustness of memristive technologies for their use in emerging applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling and Simulation of Hysteron Dynamics in HfO2-Based Memristive Devices

  • Miranda, E.|||0000-0003-0470-5318
  • García, H.|||0000-0003-1329-8806
  • Vinuesa, G.|||0000-0003-0389-3409
  • Suñé, Jordi|||0000-0003-0108-4907
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Castán, Helena|||0000-0002-3874-721X
  • Dueñas, S.|||0000-0002-2328-1752
Published studies on memristive devices primarily focus on the conventional current-voltage major hysteresis loop, often overlooking the switching dynamics that emerge under controlled amplitude excitation. The resulting major and minor loops, often referred to as hysterons, provide a more stringent benchmark for model validation, while also offering deeper insight into the key physical mechanisms governing resistive switching. In this work, hysteron behavior in HfO₂-based memristive devices is analyzed within the framework of the Dynamic Memdiode Model (DMM). Hysterons are particularly relevant for neuromorphic computing, as they encode synaptic weights. Both experimental and modeling results indicate that the switching dynamics are predominantly governed by the applied voltage, whereas thermal effects associated with dissipation in the conductive filament appear to play a secondary role or remain implicit within the proposed description. Overall, these findings demonstrate that the DMM provides a robust and effective framework for the analysis and compact modeling of memristive devices. An updated LTspice implementation of the DMM is provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fabrication and Characterization of Al/Ti/HfO2/W Memristor-Based RF Switches

  • Amarilla, Tobías|||0009-0002-4208-9237
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Paco, Pedro de|||0000-0002-7628-7189
  • Verdú, Jordi|||0000-0002-2434-7012
This work reports for the first time on the fabrication and the DC and radio frequency (RF) characterization of CMOS-compatible Al/Ti/HfO2/W memristor-based RF switches, integrated with coplanar transmission lines (TLs) designs in two configurations: series and shunt memristor. The fabricated memristors show stable bipolar resistive switching and repeatable on/off conductive states over multiple cycles, achieving an on/off ratio exceeding one order of magnitude. During the memristor operation, increasing the current limit (CL) during SET process reduces the on-state resistance, enhancing the conduction of the filament and improving the switch performance. The two RF switch configurations were also experimentally characterized in the frequency domain from 10 MHz to 50GHz, revealing that CL controls the RF response of the switch: In the series configuration the insertion loss is reduced below 2.1dB in the on-state, whereas the shunt configuration achieves isolation up to 12 dB in the off-state. The cutoff frequency was extracted, reaching a value of 8.1 GHz. The experimental results demonstrate the potential of memristor devices as compact, low-power, nonvolatile RF switches, paving the way for their exploitation in RF applications and circuits.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Programming Techniques of Resistive Random-Access Memory Devices for Neuromorphic Computing

  • Machado, Pau
  • Manich, Salvador
  • Gómez-Pau, Álvaro
  • Rodríguez-Montañés, Rosa
  • Bargalló González, Mireia
  • Campabadal, Francesca
  • Arumí, Daniel
Neuromorphic computing offers a promising solution to overcome the von Neumann bottleneck, where the separation between the memory and the processor poses increasing limitations of latency and power consumption. For this purpose, a device with analog switching for weight update is necessary to implement neuromorphic applications. In the diversity of emerging devices postulated as synaptic elements in neural networks, RRAM emerges as a standout candidate for its ability to tune its resistance. The learning accuracy of a neural network is directly related to the linearity and symmetry of the weight update behavior of the synaptic element. However, it is challenging to obtain such a linear and symmetrical behavior with RRAM devices. Thus, extensive research is currently devoted at different levels, from material to device engineering, to improve the linearity and symmetry of the conductance update of RRAM devices. In this work, the experimental results based on different programming pulse conditions of RRAM devices are presented, considering both voltage and current pulses. Their suitability for application as analog RRAM-based synaptic devices for neuromorphic computing is analyzed by computing an asymmetric nonlinearity factor., This work was supported in part by Spanish MCIN/AEI /10.13039/501100011033/FEDER, under Projects PID2022-141391OB-C22 and PID2022-139586NB-C42., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and simulation of successive breakdown events in thin gate dielectrics using standard reliability growth models

  • Miranda, E.
  • Aguirre, F. L.
  • Salvador, E.
  • González, Mireia
  • Campabadal, Francesca
  • Suñé, J.
The application of constant electrical stress to a metal–insulator-semiconductor (MOS) or metal–insulator-metal (MIM) structure can generate multiple breakdown events in the dielectric film. Very often, these events are detected as small jumps in the current–time characteristic of the device under test and can be treated from the stochastic viewpoint as a counting process. In this letter, a wide variety of standard reliability growth models for this process are assessed in order to determine which option provides the best simulation results compatible with the experimental observations. For the generation of the breakdown event arrivals, two alternative stochastic methods for the power-law Poisson process are investigated: first, the inversion algorithm for the cumulative distribution function and second, an on-the-fly method based on the so-called rejection algorithm. Though both methods are equivalent, the first one is more appropriate for data analysis using spreadsheet calculations while the second one is highly suitable for circuit simulation environments like LTSpice. The connection of the selected nonhomogeneous Poisson process with the Weibull model for dielectric breakdown is also discussed., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal dependence of the current in TiN/Ti/HfO2/W memristors at different intermediate conduction states

  • Jiménez-Molinos, F.
  • Vinuesa, G.
  • García, H.
  • Dueñas, S.
  • Castán, H.
  • González, M. B.
  • Campabadal, Francesca
  • Roldán, J. B.
The dependence of the current in TiN/Ti/HfO2/W devices on the temperature is investigated in the range from 78 K to 340 K. Resistive switching cycles at 78 K are conducted to explore the thermal dependence in filament configurations with different intermediate resistance states. The less conductive states show an increase of the current as the temperature rises, while the fully formed filament displays a metallic-like behavior. A comprehensive model, based on the Stanford Model including a series resistance, is proposed and successfully validated by experimental data. The interplay between the ohmic and non-linear components in the model for different filament states is analyzed, emphasizing the dominance of the non-linear component (and its corresponding thermal dependence) in partially formed filaments and the prevalence of the ohmic component in the fully formed filament, which shows a decreasing current as the temperature rises. A complete compact model for simulation of circuits including the thermal dependence of these devices is developed., We acknowledge grants PID2022-139586NB-C42, PID2022-139586NB-C43, PID2022-139586NB-C44 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. IMB authors thank the CSIC funding through project 20225AT012 and the Generalitat de Catalunya- AGAUR for project 2021 SGR 00497. M.B.G. acknowledges the grant RYC2020-030150-I funded by MICIU/AEI/ 10.13039/501100011033 and by \u201CESF Investing in your future\u201D., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A thorough investigation of the switching dynamics of TiN/Ti/10 nm-HfO2/W resistive memories

  • Maldonado, D.
  • Vinuesa, G.
  • Aldana, S.
  • Aguirre, F. L.
  • Cantudo, A.
  • García, H.
  • González, M.
  • Jiménez-Molinos, F.
  • Campabadal, Francesca
  • Miranda, E.
  • Dueñas, S.
  • Castán, H.
  • Roldán, J. B.
The switching dynamics of TiN/Ti/HfO<inf>2</inf>/W-based resistive memories is investigated. The analysis consisted in the systematic application of voltage sweeps with different ramp rates and temperatures. The obtained results give clear insight into the role played by transient and thermal effects on the device operation. Both kinetic Monte Carlo simulations and a compact modeling approach based on the Dynamic Memdiode Model are considered in this work with the aim of assessing, in terms of their respective scopes, the nature of the physical processes that characterize the formation and rupture of the filamentary conducting channel spanning the oxide film. As a result of this study, a better understanding of the different facets of the resistive switching dynamics is achieved. It is shown that the temperature and, mainly, the applied electric field, control the switching mechanism of our devices. The Dynamic Memdiode Model, being a behavioral analytic approach, is shown to be particularly suitable for reproducing the conduction characteristics of our devices using a single set of parameters for the different operation regimes., This work was supported by the Spanish Ministry of Science and Innovation and FEDER program [ PID2022-139586NB-C41 , PID2022-139586NB-C42 , PID2022-139586NB-C43 , PID2022-139586NB-C44 ], the Consejería de Conocimiento, Investigación y Universidad, Junta de Andalucía (Spain) [ B-TIC-624-UGR20 ] and the Spanish Consejo Superior de Investigaciones Científicas ( CSIC ) [ 20225AT012 ], with support of FEDER funds. M. B. G. acknowledges the Ramón y Cajal grant number RYC2020-030150-I . E.M and F.A. acknowledge the support from the European project MEMQuD, code 20FUN06, which has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variability in HfO2-based memristors described with a new bidimensional statistical technique

  • Acal, C
  • Maldonado, D
  • Cantudo, A
  • González, M.
  • Jiménez-Molinos, F
  • Campabadal, Francesca
  • Roldán, J B
A new statistical analysis is presented to assess cycle-to-cycle variability in resistive memories. This method employs two-dimensional (2D) distributions of parameters to analyse both set and reset voltages and currents, coupled with a 2D coefficient of variation (CV). This 2D methodology significantly enhances the analysis, providing a more thorough and comprehensive understanding of the data compared to conventional one-dimensional methods. Resistive switching (RS) data from two different technologies based on hafnium oxide are used in the variability study. The 2D CV allows a more compact assessment of technology suitability for applications such as non-volatile memories, neuromorphic computing and random number generation circuits., Research supported by the projects PID2022-139586NB-C44, PID2022-139586NB-C42 and PID2020-113961GB-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU, and the \u201CMar\u00EDa de Maeztu\u201D Excellence Unit IMAG reference CEX2020-001105-M, funded by MCIN/AEI/10.13039/501100011033. IMB authors thank the CSIC funding through project 20225AT012, the Generalitat de Catalunya-AGAUR through project 2021 SGR 00497 and the support provided by the project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033, and by the European Union through the NextGenerationEU/PRTR program. M. B. G. acknowledges the grant RYC2020-030150-I funded by MCIN/AEI/ 10.13039/501100011033 and by \u201CESF Investing in your future\u201D., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and Simulation of Correlated Cycle-to-Cycle Variability in the Current-Voltage Hysteresis Loops of RRAM Devices

  • Salvador, E.
  • González, M.
  • Campabadal, Francesca
  • Rodriguez, R.
  • Miranda, E.
Resistive RAMs or memristors are nowadays considered serious candidates for the implementation of energy efficient and scalable neuromorphic computing systems. However, a major drawback of this technology is the instability of the device current-voltage (I-V) characteristic as is clearly revealed by the so-called cycle-to-cycle (C2C) variability. This lack of complete reproducibility is a consequence of the spontaneous or induced morphological changes of the filamentary conducting structure occurring at atomic level. Variability is an essential issue any compact model for the conduction characteristics of RRAM devices should be able to cope with to be considered realistic. In this work, a thorough investigation of the C2C variability in the I-V loops of HfO<inf>2</inf>-based memristive structures was carried out with the aim of incorporating this information into the equations of the Dynamic Memdiode Model. From the compact modeling viewpoint, C2C correlation effects are achieved using model parameters expressed as mean-reverting stochastic processes driven by Wiener noise (Ornstein-Uhlenbeck process). The direct and indirect links between the random behavior of the model parameters and the observable magnitudes (high and low resistance states, set and reset voltages, etc.) are discussed. The agreement between simulation and experimental results is statistically assessed using the Wasserstein's distance metric., Funding text 1 ACKNOWLEDGMENT This work was supported in part by Spanish MCIN/AEI /10.13039/501100011033/FEDER under projects PID2019-103869RB-C32, PID2022-139586NB-C41 and PID2022-139586NB-C42. The authors thank CSIC funding through project 20225AT012. E.S. acknowledges the Departament de Recerca I Universitats de la Generalitat de Catalunya for the 2020FISDU00261 scholarship. M.B.G. acknowledges the Ram\u00F3n y Cajal grant No. RYC2020-030150-I. Funding text 2 The work of author E. Salvador was supported by Departament de Recerca I Universitats de la Generalitat de Catalunya under 2020FISDU00261 scholarship. The work of author M.B. Gonzalez was supported by Ram\u00F3n y Cajal under Grant RYC2020-030150-I. This work was supported in part by Spanish MCIN/AEI/10.13039/501100011033/FEDER under Project PID2019-103869RB-C32, Project PID2022-139586NB-C41, and Project PID2022-139586NB-C42, and in part by CSIC funding under Project 20225AT012., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of the temperature on the conductive filament morphology in HfO2-based RRAM

  • Vinuesa, Guillermo
  • García, Héctor
  • Poblador, Samuel
  • González, M.
  • Campabadal, Francesca
  • Castán, Helena
  • Dueñas, Salvador
In this letter, we study the impact of the temperature on the resistive switching effect of TiN/Ti/HfO<inf>2</inf>/W metal–insulator-metal devices. An analysis of the conduction mechanisms is made, with the low resistance state being ruled by nearest neighbor hopping, while the conduction in the high resistance state is dominated by Schottky emission. Taking into account the filamentary mechanism behind the resistive switching effect, a thorough analysis of the Schottky emission allows for the calculation of the gap between conductive filament tip and metal electrode in the high resistance state. We report an increase of this gap when temperature lowers below a certain value. Moreover, the mentioned gap adopts values of integer multiples of the the mean distance between traps obtained by the hopping model., This work was supported by the Spanish Ministry of Science (PID2022-139586NB-C42 and PID2022-139586NB-C43) and the Consejo Superior de Investigaciones Científicas (2022AT012). M.B. González acknowledges the Ramón y Cajal grant No. RYC2020-030150-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Event-Driven Stochastic Compact Model for Resistive Switching Devices

  • Sune, J.
  • Bargallo-Gonzalez, Mireia
  • Saludes, Mercedes
  • Campabadal, Francesca
  • Miranda, E.
A stochastic compact model for resistive switching (RS) devices is presented. The motivation is twofold: first, introducing variability in a natural way, and second, accounting for the discrete jumps of conductance observed during set and reset transitions. The model is based on an event generation rate, and it is an 'on-the-fly' procedure because events are randomly generated as the simulation proceeds in time. For the generation of events, we assume a mixed nonhomogeneous Poisson process (NHPP). Before considering RS, we deal with the generation of successive breakdown (BD) events in metal-insulator-semiconductor structures. This confirms the validity of the approach by comparing it with experimental data in which discrete events are evident. To deal with RS, we transform a previous compact model into a stochastic model. Comparison with experiments in TiN/Ti/HfO2/W devices shows the validity of the approach. Current-voltage loops and potentiation-depression transients in pulsed experiments are captured with a single set of parameters. Moreover, the model is an adequate framework to deal with both cycle-to-cycle and device-to-device variability., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades (MCIN)/Agencia Española de Investigación (AEI)/10.13039/501100011033 under Project PID2022-139586NB-C41 and Project PID2022-139586NB-C42 and in part by the Generalitat de Catalunya-Agència de Gestió d’Ajudes Universitàries i d’Investigació (AGAUR) under Project 2021 SGR 00497 and Project SGR 2021 00199. The work of J. Suñé and E. Miranda was supported in part by European Project MEMQuD funded by the European Metrology Programme for Innovation and Research (EMPIR) Program (Euramet) under Grant 20FUN06 and in part by the Participating States and European Union’s Horizon 2020 Program. The work of M. Bargalló-González was supported in part by the Consejo Superior de Investigaciones Científicas (CSIC) funding through under Project 20225AT012, in part by MCIN/AEI/10.13039/501100011033 under Grant RYC2020-030150-I, and in part by the “European Social Fund (ESF) Investing in your future.” The work of M. Saludes and F. Campabadal was supported by CSIC funding through under Project 20225AT012., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical stress-induced damage in TiN/Ti/HfO2/W memristors: The critical role of voltage polarity and vacuum condition

  • Saludes-Tapia, M.
  • Campabadal, F.
  • Solé, L.
  • Borrisé, Xavier
  • Miranda, E.
  • Bargallo, Mireia
In this work, we investigate the damage caused by the catastrophic breakdown of the insulating layer in TiN/Ti/HfO<inf>2</inf>/W memristors when subjected to ramped voltage stress. Our analysis includes physical and compositional examinations of the damaged regions using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy. These techniques are complemented by in situ SEM current-voltage (I-V) measurements performed under vacuum conditions. In particular, we explored the connection of the applied voltage polarity with the damage onset. We show that high negative voltages applied to the TiN top electrode typically result in worm-like damage patterns. This specific type of damage, along with more severe stages of degradation such as disconnection and melting, is exclusively observed for negative biases and does not occur under vacuum conditions. Conversely, under positive voltage stress, no damage is detected in the top electrode of the devices irrespective of the external conditions. These results highlight the critical role of vacuum in controlling redox-driven compositional changes and preventing catastrophic damage. By systematically analyzing the effects of voltage polarity and ambient conditions, this study provides key insights into damage generation mechanisms. The obtained results pave the way for enhancing the lifetime, reliability, and robustness of memristive technologies for their use in emerging applications., This work was supported through Grant Nos. PID2022-139586NB-C41 and PID2022-139586NB-C42, funded by MICIU/AEI/10.13039/501100011033 and FEDER, EU; the project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033 and by the European Union through the Next Generation EU/PRTR program; and CSIC funding through project 20225AT012. Additional support was received from the Generalitat de Catalunya-AGAUR through project 2021 SGR 00497., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reset transition in HfO2-Based memristors using a constant power signal

  • García, Héctor
  • Vinuesa, Guillermo
  • González, Mireia B.
  • Campabadal, Francesca
  • Castán, Helena
  • Dueñas, Salvador
Memristors, also known as resistive switching devices, have great potential for applications in memory and neuromorphic systems. Understanding the switching mechanisms is crucial since ReRAM memories need to operate at high frequencies. It is known the reset transition is dominated by the conductive filament Joule heating. We have studied the reset transition in TiN/Ti/HfO<inf>2</inf>/W metal–insulator–metal memristors by applying constant power signals to different initial filament thicknesses, which were obtained using different initial low resistance states. The results show that power value controls the reset times, decreasing when the power is increased. On the other hand, larger resistances lead to faster reset transitions. These measurements have allowed us to obtain a value of the thermal resistance of the conductive filament. Moreover, we have observed the reset times as a function of the initial resistance and the power lies on a common plane, which allows us to estimate the transition time by fixing an initial resistance and a power value., This work was supported by grants PID2022-139586NB-C43 and PID2022-139586NB-C42 funded by MCIN/AEI/10.13039/501100011033 and by FEDER “A way of making Europe”. IMB authors thank the CSIC funding through project 20225AT012, the Generalitat de Catalunya - AGAUR for project 2021 SGR 00497, and the support provided by the project CR32023040125, funded by MICIU/AEI/10.13039/501100011033, and by the European Union through the NextGeneration EU/PRTR program. M.B.G. acknowledges the grant RYC2020-030150-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future” initiative., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics of set and reset processes in HfO2 -based bipolar resistive switching devices

  • Vinuesa G.
  • García García, Héctor
  • Gonzalez, M.B.
  • Campabadal, Francesca
  • Castán Lanaspa, María Helena
  • Dueñas Carazo, Salvador
The temporal evolution of the set and reset processes in TiN/Ti/HfO2/W metal-insulator-metal devices exhibiting resistive switching behavior is investigated in depth. To this end, current transients were recorded by applying different voltages, which allowed us to change the conductance of the device. While both set and reset transitions are faster with increasing applied voltage, they clearly exhibit different time responses. The set transition is characterized by a monotonic increase in current after a sudden initial rise in its value, while the reset transition is characterized by a notably nonlinear response that resembles a sigmoidal function. We have successfully modeled the reset current transient with a bi-dose function and defined its time constant (Time-to-Reset) as the time where the current variation reaches its maximum value. Our findings show that varying the initial conditions of the reset process, such as increasing the temperature and/or decreasing the initial resistance value, significantly affect the reset transient, exponentially increasing the reset time constant value. This allows us to model its dependencies with the equation of a plane., This work was supported by grant PID2022-139586NB-C42 and PID2022-139586NB-C43 funded by MCIN/AEI/10.13039/501100011033 and by ERDF \u201CA way of making Europe\u201D. The authors also acknowledge project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR. IMB authors thank the CSIC funding through project 20225AT012 and the Generalitat de Catalunya - AGAUR for project 2021 SGR 00497. M.B.G. acknowledges the grant RYC2020-030150-I funded by MICIU/AEI/10.13039/501100011033 and by \u201CESF Investing in your future\u201D., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of set and reset dynamics on HfO2, Al2O3, and bilayer memristors

  • Vinuesa, G.
  • del Val, T.
  • Kalam, K.
  • García, H.
  • González, M.
  • Campabadal, Francesca
  • Dueñas, S.
  • Castán, H.
In this study, resistive switching in three structures with HfO<inf>2</inf>, Al<inf>2</inf>O<inf>3</inf>, and bilayer (HfO<inf>2</inf> + Al<inf>2</inf>O<inf>3</inf>) oxides is studied. Electrical characterization reveals differences in switching dynamics and performance across these configurations, highlighting the impact of oxide composition and structure on device behavior. The time needed to reset is defined and studied in detail, showing an exponential dependence with the applied voltage. Finally, an initial assessment of the effect that the set and reset transient has on the multilevel capabilities of the devices is made., This work was supported by grants PID2022-139586NB-C43 and PID2022-139586NB-C42 funded by MCIN/AEI/10.13039/501100011033 and by FEDER \u201CA way of making Europe\u201D. IMB authors acknowledge support from CSIC ( 20225AT012 ), Generalitat de Catalunya - AGAUR (2021 SGR 00497) and project CR32023040125, funded by MICIU/AEI/10.13039/ 501100011033 and by the NextGeneration EU/PRTR program. K. Kalam acknowledges project PUTJD1220 funded by the Estonian Research Agency and the Ernst Jaakson memorial fund scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Statistical, simulation and modeling analysis of variability in memristors with single and bilayer dielectrics of HfO2 and Al2O3, a comparison

  • Cantudo, A.
  • Jiménez-Molinos, F.
  • Ruiz, P. Q.
  • López, A.
  • Villena, M. A.
  • González, M.
  • Campabadal, Francesca
  • Roldán, J. B.
Variability is a key aspect of memristors that hinders their usage in massive commercial applications. This study investigates the cycle-to-cycle variability of resistive switching devices fabricated using three different dielectric configurations: two monolayer insulators (Al<inf>2</inf>O<inf>3</inf> or HfO<inf>2</inf>) or a HfO<inf>2</inf>/Al<inf>2</inf>O<inf>3</inf> bilayer. Thousands of resistive switching (RS) current-voltage (I-V) curves were measured under ramped voltage stress and the RS parameters were extracted using different numerical methodologies. The variability of the obtained RS parameters was analyzed using the conventional 1D coefficient of variation (σ/μ, where σ stands for the standard deviation and μ for the mean), as well as a recently introduced 2D coefficient of variation, providing a deeper insight into the joined variability of the switching voltages and currents. An enhanced version of the Stanford compact model was employed to model the experimental I-V curves, in addition to an analysis based on a 3D circuit breaker (CB) simulator, which incorporates thermal effects for controlling the switching of the CB. These two modeling approaches successfully captured the observed RS behavior and variability trends along the thousands of measured cycles and for the three considered technologies. Furthermore, the simulation study sheds light on how the different thermal properties of the studied technologies impact on the conductive filament evolution., Research supported by the projects PID2022-139586NB-C44, PID2022-139586NB-C42 funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. IMB authors thank the CSIC funding through project 20225AT012, the Generalitat de Catalunya-AGAUR through project 2021 SGR 00497 and the support provided by the project CR32023-040125, funded by MICIU/AEI/10.13039/501100011033, and by the European Union through the NextGenerationEU/PRTR program. M.B.G. acknowledges the grant RYC2020-030150-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling and simulation of successive breakdown events in thin gate dielectrics using standard reliability growth models

  • Miranda, E.|||0000-0003-0470-5318
  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Salvador, E.
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
The application of constant electrical stress to a metal-insulator-semiconductor (MOS) or metal-insulator-metal (MIM) structure can generate multiple breakdown events in the dielectric film. Very often, these events are detected as small jumps in the current-time characteristic of the device under test and can be treated from the stochastic viewpoint as a counting process. In this letter, a wide variety of standard reliability growth models for this process are assessed in order to determine which option provides the best simulation results compatible with the experimental observations. For the generation of the breakdown event arrivals, two alternative stochastic methods for the power-law Poisson process are investigated: first, the inversion algorithm for the cumulative distribution function and second, an on-the-fly method based on the so-called rejection algorithm. Though both methods are equivalent, the first one is more appropriate for data analysis using spreadsheet calculations while the second one is highly suitable for circuit simulation environments like LTSpice. The connection of the selected nonhomogeneous Poisson process with the Weibull model for dielectric breakdown is also discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Event-Driven Stochastic Compact Model for Resistive Switching Devices

  • Suñé, Jordi|||0000-0003-0108-4907
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Miranda, E.|||0000-0003-0470-5318
A stochastic compact model for resistive switching (RS) devices is presented. The motivation is twofold: first, introducing variability in a natural way, and second, accounting for the discrete jumps of conductance observed during set and reset transitions. The model is based on an event generation rate, and it is an 'on-the-fly' procedure because events are randomly generated as the simulation proceeds in time. For the generation of events, we assume a mixed nonhomogeneous Poisson process (NHPP). Before considering RS, we deal with the generation of successive breakdown (BD) events in metal-insulator-semiconductor structures. This confirms the validity of the approach by comparing it with experimental data in which discrete events are evident. To deal with RS, we transform a previous compact model into a stochastic model. Comparison with experiments in TiN/Ti/HfO2/W devices shows the validity of the approach. Current-voltage loops and potentiation-depression transients in pulsed experiments are captured with a single set of parameters. Moreover, the model is an adequate framework to deal with both cycle-to-cycle and device-to-device variability.