Dipòsit Digital de Documents de la UAB
Publicación
Artículo científico (JournalArticle)
Fabrication and Characterization of Al/Ti/HfO2/W Memristor-Based RF Switches
This work reports for the first time on the fabrication and the DC and radio frequency (RF) characterization of CMOS-compatible Al/Ti/HfO2/W memristor-based RF switches, integrated with coplanar transmission lines (TLs) designs in two configurations: series and shunt memristor. The fabricated memristors show stable bipolar resistive switching and repeatable on/off conductive states over multiple cycles, achieving an on/off ratio exceeding one order of magnitude. During the memristor operation, increasing the current limit (CL) during SET process reduces the on-state resistance, enhancing the conduction of the filament and improving the switch performance. The two RF switch configurations were also experimentally characterized in the frequency domain from 10 MHz to 50GHz, revealing that CL controls the RF response of the switch: In the series configuration the insertion loss is reduced below 2.1dB in the on-state, whereas the shunt configuration achieves isolation up to 12 dB in the off-state. The cutoff frequency was extracted, reaching a value of 8.1 GHz. The experimental results demonstrate the potential of memristor devices as compact, low-power, nonvolatile RF switches, paving the way for their exploitation in RF applications and circuits.