Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Revealing the quantum nature of the voltage-induced conductance changes in oxygen engineered yttrium oxide-based RRAM devices

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Piros, Eszter|||0000-0001-8714-9059
  • Kaiser, Nico|||0000-0002-5644-890X
  • Vogel, Tobias|||0000-0003-0720-0681
  • Petzold, Stefan|||0000-0002-4994-9781
  • Gehrunger, Jonas|||0000-0002-0585-7893
  • Hochberger, Christian|||0000-0001-5516-7826
  • Oster, T.
  • Hofmann, K.|||0000-0002-6675-0221
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
  • Alff, Lambert|||0000-0001-8185-4275
In this work, the quasi-analog to discrete transition occurring in the current-voltage characteristic of oxygen engineered yttrium oxide-based resistive random-access memory (RRAM) devices is investigated in detail. In particular, the focus of our research is not on the absolute conductance values of this characteristic but on the magnitude of its conductance changes occurring during the reset process of the device. It is found that the detected changes correspond to conductance values predominantly of the order of the quantum unit of conductance G = 2 e 2 / h, where e is the electron charge and h the Planck constant. This feature is observed even at conductance levels far above G , i.e. where electron transport is seemingly diffusive. It is also observed that such behavior is reproducible across devices comprising yttrium oxide layers with different oxygen concentrations and measured under different voltage sweep rates. While the oxygen deficiency affects the total number of quantized conductance states, the magnitude of the changes in conductance, close to 1 G , is invariant to the oxygen content of the functional layer.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Study on the Connection Between the Set Transient in RRAMs and the Progressive Breakdown of Thin Oxides

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Pazos, Sebastián Matías|||0000-0002-7354-4530
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
  • Palumbo, Félix|||0000-0002-7749-5035
In this paper, the transition rate (TR) from the high-resistance state to the low-resistance state of a HfO-based resistive random access memory (RRAM) is investigated. The TR is statistically characterized by applying constant voltage stresses in the range from 0.45 to 0.65 V. It is found that TR follows a voltage dependence which closely resembles the one exhibited by metal-insulator-semiconductor / metal-insulator-metal structures when subjected to constant voltage stress, but with remarkably different fitting parameters. This result suggests a common underlying mechanism in both evolutionary behaviors. Furthermore, the investigation provides additional evidence supporting the micro-structural changes in the oxide after the forming step as well as the role played by the atomic species during the SET event.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simple method for monitoring the switching activity in memristive cross-point arrays with line resistance effects

  • Miranda, E.|||0000-0003-0470-5318
  • Morell, Antoni|||0000-0003-2249-8594
  • Muñoz Gorriz, Jordi|||0000-0003-4101-5009
  • Suñé, Jordi|||0000-0003-0108-4907
A simple method for monitoring the switching activity (forming, set, reset events and stuck-at-0/1 faults) in memristive cross-point arrays with line resistance effects is proposed. The method consists in correlating incremental current changes in a four-terminal configuration with the location of the switching cell within the array. The potential drops in the interconnection wires as well as the nonlinearity of the switching elements are considered within this approach. The problem is solved by iterating the Kirchhoff's current law for the coupled word and bit lines with appropriate boundary conditions. The main experimental advantage of the proposed method is that only four SMUs (source-measurement unit) are needed to identify the switching cell. In this way, our method could contribute to foster the system-level reliability analysis of cross-point arrays since additional circuitry for the individual addressing of the switching device is not required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization of HfO2-based devices with indication of second order memristor effects

  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Cagli, Carlo|||0000-0002-9978-7127
  • Perniola, Luca
  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
Resistive switching is investigated in TiN/Ti/HfO (10 nm)/TiN devices in series with a NMOS transistor as selector in a 1T1R configuration. A complete electrical characterization of the devices is carried out using DC voltage loops, constant-voltage stressed and pulses with varying voltage amplitude and time width. Good control of the ON resistance is achieved by applying different transistor gate voltages and multiple OFF states are controllably reached by varying the maximum reset voltage. The on/off resistance ratio is successfully controlled by changing the pulse amplitude and time duration. However, significant memory effects are reported, showing that the switching of a device depends on its switching history. Exploring the on/off ratio for different set and reset voltage amplitudes in otherwise identical set/reset pulse experiments is shown to depend on the order of application of the different stress conditions so that the on/off resistance map in the V /V space is not unique. We interpret these results as an evidence of second-order memristive effects.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Switching Voltage and Time Statistics of Filamentary Conductive Paths in HfO2-Based ReRAM Devices

  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Cagli, Carlo|||0000-0002-9978-7127
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Switching voltage and time statistics of HfO2-based one transistor-one resistor structures are investigated with the aim of clarifying the underlying physical mechanism that governs the formation and rupture of filamentary paths in the insulating layer. From the oxide reliability viewpoint, constant and ramped voltage stress experiments provide strong support to the so-called E-model, which is shown to be in line with current theories relating the reversibility of the conduction states in resistive random access memory devices to ionic drift and ultimately to Kramers' escape rate theory. It is shown how the switching statistics can be used to estimate the width and formation energy of the insulating gap along the filament as well as its temperature.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A new method for estimating the conductive filament temperature in OxRAM devices based on escape rate theory

  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Muñoz Gorriz, Jordi|||0000-0003-4101-5009
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Because of the atomic nature of the system under study, an estimation of the temperature of the conductive filament (CF) in OxRAM devices as a function of the applied bias can only be obtained by means of indirect methods, usually electrothermal simulations. In this paper, a heuristic approach that combines time-dependent dielectric breakdown (TDDB) statistics for the electroformed device with field and temperature-assisted ionic transport within the framework of escape rate theory is presented. Extended expressions for the time-to-failure acceleration law (E-model) and for the Kramers' rate compatible both with the standard models at moderate/high biases and with the principle of detailed balance at equilibrium are proposed. An approximate expression for the CF temperature is reported. For the investigated stress voltage range (0.30 V-0.65 V), the estimated CF temperature at the SET condition is found to be in the range 350 K-600 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the application of a diffusive memristor compact model to neuromorphic circuits

  • Cisternas Ferri, Agustín
  • Rapoport, Alan
  • Fierens, Pablo I.|||0000-0001-5725-0017
  • Patterson, German A.|||0000-0001-9035-3042
  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
Memristive devices have found application in both random access memory and neuromorphic circuits. In particular, it is known that their behavior resembles that of neuronal synapses. However, it is not simple to come by samples of memristors and adjusting their parameters to change their response requires a laborious fabrication process. Moreover, sample to sample variability makes experimentation with memristor-based synapses even harder. The usual alternatives are to either simulate or emulate the memristive systems under study. Both methodologies require the use of accurate modeling equations. In this paper, we present a diffusive compact model of memristive behavior that has already been experimentally validated. Furthermore, we implement an emulation architecture that enables us to freely explore the synapse-like characteristics of memristors. The main advantage of emulation over simulation is that the former allows us to work with real-world circuits. Our results can give some insight into the desirable characteristics of the memristors for neuromorphic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-organizing neural networks based on OxRAM devices under a fully unsupervised training scheme

  • Pedro, Marta|||0000-0003-0317-7373
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
A fully-unsupervised learning algorithm for reaching self-organization in neuromorphic architectures is provided in this work. We experimentally demonstrate spike-timing dependent plasticity (STDP) in Oxide-based Resistive Random Access Memory (OxRAM) devices, and propose a set of waveforms in order to induce symmetric conductivity changes. An empirical model is used to describe the observed plasticity. A neuromorphic system based on the tested devices is simulated, where the developed learning algorithm is tested, involving STDP as the local learning rule. The design of the system and learning scheme permits to concatenate multiple neuromorphic layers, where autonomous hierarchical computing can be performed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis and simulation of the multiple resistive switching modes occurring in HfO x -based resistive random access memories using memdiodes

  • Petzold, Stefan|||0000-0002-4994-9781
  • Miranda, E.|||0000-0003-0470-5318
  • Sharath, S. U.|||0000-0002-8644-1303
  • Muñoz Gorriz, Jordi|||0000-0003-4101-5009
  • Vogel, Tobias|||0000-0003-0720-0681
  • Piros, Eszter|||0000-0001-8714-9059
  • Kaiser, Nico|||0000-0002-5644-890X
  • Eilhardt, Robert
  • Zintler, Alexander|||0000-0002-2272-3184
  • Molina-Luna, Leopoldo|||0000-0002-9412-8093
  • Suñé, Jordi|||0000-0003-0108-4907
  • Alff, Lambert|||0000-0001-8185-4275
In this work, analysis and simulation of all experimentally observed switching modes in hafnium oxide based resistive random access memories are carried out using a simplified electrical conduction model. To achieve switching mode variation, two metal-insulator-metal cells with identical stack combination, but varying oxygen stoichiometry of the hafnia layer, namely, stoichiometric vs highly deficient, are considered. To access the individual switching modes, the devices were subjected to a variety of cycling conditions comprising different voltage and current ranges. For modeling the device behavior, a single or two antiserially connected memdiodes (diode with memory) were utilized. In this way, successful compact simulation of unipolar, bipolar, threshold, and complementary resistive switching modes is accomplished confirming the coexistence of two switching mechanisms of opposite polarity as the basis for all observable switching phenomena in this material. We show that only calibration of the outer current-voltage loops with the memdiode model is necessary for predicting the device behavior in the defined region revealing additional information on the switching process. The correspondence of each memdiode device with the conduction characteristics of the individual top and bottom metal-oxide contacts allows one to assess the role played by each interface in the switching process separately. This identification paves the path for a future improvement of the device performance and functionality by means of appropriate interface engineering.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Minimization of the Line Resistance Impact on Memdiode-Based Simulations of Multilayer Perceptron Arrays Applied to Pattern Recognition

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Gomez, Nicolás M.
  • Pazos, Sebastián Matías|||0000-0002-7354-4530
  • Palumbo, Félix|||0000-0002-7749-5035
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
In this paper, we extend the application of the Quasi-Static Memdiode model to the realistic SPICE simulation of memristor-based single (SLPs) and multilayer perceptrons (MLPs) intended for large dataset pattern recognition. By considering ex-situ training and the classification of the hand-written characters of the MNIST database, we evaluate the degradation of the inference accuracy due to the interconnection resistances for MLPs involving up to three hidden neural layers. Two approaches to reduce the impact of the line resistance are considered and implemented in our simulations, they are the inclusion of an iterative calibration algorithm and the partitioning of the synaptic layers into smaller blocks. The obtained results indicate that MLPs are more sensitive to the line resistance effect than SLPs and that partitioning is the most effective way to minimize the impact of high line resistance values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Memristors for neuromorphic circuits and artificial intelligence applications

  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
Artificial Intelligence has found many applications in the last decade due to increased computing power. Artificial Neural Networks are inspired in the brain structure and consist in the interconnection of artificial neurons through artificial synapses in the so-called Deep Neural Networks (DNNs). Training these systems requires huge amounts of data and, after the network is trained, it can recognize unforeseen data and provide useful information. As far as the training is concerned, we can distinguish between supervised and unsupervised learning. The former requires labelled data and is based on the iterative minimization of the output error using the stochastic gradient descent method followed by the recalculation of the strength of the synaptic connections (weights) with the backpropagation algorithm. On the other hand, unsupervised learning does not require data labeling and it is not based on explicit output error minimization. Conventional ANNs can function with supervised learning algorithms (perceptrons, multi-layer perceptrons, convolutional networks, etc.) but also with unsupervised learning rules (Kohonen networks, self-organizing maps, etc.). Besides, another type of neural networks are the so-called Spiking Neural Networks (SNNs) in which learning takes place through the superposition of voltage spikes launched by the neurons. Their behavior is much closer to the brain functioning mechanisms they can be used with supervised and unsupervised learning rules. Since learning and inference is based on short voltage spikes, energy efficiency improves substantially. Up to this moment, all these ANNs (spiking and conventional) have been implemented as software tools running on conventional computing units based on the von Neumann architecture. However, this approach reaches important limits due to the required computing power, physical size and energy consumption. This is particularly true for applications at the edge of the internet. Thus, there is an increasing interest in developing AI tools directly implemented in hardware for this type of applications. The first hardware demonstrations have been based on Complementary Metal-Oxide-Semiconductor (CMOS) circuits and specific communication protocols. However, to further increase training speed andenergy efficiency while reducing the system size, the combination of CMOS neuron circuits with memristor synapses is now being explored. It has also been pointed out that the short time non-volatility of some memristors may even allow fabricating purely memristive ANNs. The memristor is a new device (first demonstrated in solid-state in 2008) which behaves as a resistor with memory and which has been shown to have potentiation and depression properties similar to those of biological synapses. In this Special Issue, we explore the state of the art of neuromorphic circuits implementing neural networks with memristors for AI applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fast Fitting of the Dynamic Memdiode Model to the Conduction Characteristics of RRAM Devices Using Convolutional Neural Networks

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Piros, Eszter|||0000-0001-8714-9059
  • Kaiser, Nico|||0000-0002-5644-890X
  • Vogel, Tobias|||0000-0003-0720-0681
  • Petzold, Stephan
  • Gehrunger, Jonas|||0000-0002-0585-7893
  • Oster, Timo|||0000-0003-1501-2795
  • Hochberger, Christian|||0000-0001-5516-7826
  • Suñé, Jordi|||0000-0003-0108-4907
  • Alff, Lambert|||0000-0001-8185-4275
  • Miranda, E.|||0000-0003-0470-5318
In this paper, the use of Artificial Neural Networks (ANNs) in the form of Convolutional Neural Networks (AlexNET) for the fast and energy-efficient fitting of the Dynamic Memdiode Model (DMM) to the conduction characteristics of bipolar-type resistive switching (RS) devices is investigated. Despite an initial computationally intensive training phase the ANNs allow obtaining a mapping between the experimental Current-Voltage (I-V) curve and the corresponding DMM parameters without incurring a costly iterative process as typically considered in error minimization-based optimization algorithms. In order to demonstrate the fitting capabilities of the proposed approach, a complete set of I-V s obtained from YO-based RRAM devices, fabricated with different oxidation conditions and measured with different current compliances, is considered. In this way, in addition to the intrinsic RS variability, extrinsic variation is achieved by means of external factors (oxygen content and damage control during the set process). We show that the reported method provides a significant reduction of the fitting time (one order of magnitude), especially in the case of large data sets. This issue is crucial when the extraction of the model parameters and their statistical characterization are required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of the Quasi-Static Memdiode Model in Cross-Point Arrays for Large Dataset Pattern Recognition

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Pazos, Sebastián Matías|||0000-0002-7354-4530
  • Palumbo, Félix|||0000-0002-7749-5035
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
We investigate the use and performance of the quasi-static memdiode model (QMM) when incorporated into large cross-point arrays intended for pattern classification tasks. Following Chua's memristive devices theory, the QMM comprises two equations, one equation for the electron transport based on the double-diode circuit with single series resistance and a second equation for the internal memory state of the device based on the so-called logistic hysteron or memory map. Ex-situ trained memdiodes with different MNIST-like databases are used to establish the synaptic weights linking the top and bottom wire networks. The role played by the memdiode electrical parameters, wire resistance and capacitance values, image pixelation, connection schemes, signal-to-noise ratio and device-to-device variability in the classification effectiveness are investigated. The confusion matrix is used to benchmark the system performance metrics. We show that the simplicity, accuracy and robustness of the memdiode model makes it a suitable candidate for the realistic simulation of large-scale neural networks with non-idealities.