Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

KCN Chemical Etching of van der Waals Sb2Se3 Thin Films Synthesized at Low Temperature Leads to Inverted Surface Polarity and Improved Solar Cell Efficiency

  • Jiménez Guerra, Maykel
  • Calvo Barrio, Lorenzo
  • Asensi, José Miguel
  • Caño Prades, Iván
  • Yan, Shunya
  • Barrena, Esther
  • Puigdollers, Joaquim
  • Jehl, Zacharie
  • Sánchez, Yudania
  • Saucedo, Edgardo
Recent developments in Sb2Se3 van der Waals material as an absorber candidate for thin film photovoltaic applications have demonstrated the importance of surface management for improving the conversion efficiency of this technology. Sb2Se3 thin films' versatility in delivering good efficiencies in both superstrate and substrate configurations, coupled with a compatibility with various low-temperature deposition techniques (below 500 °C and often below 350 °C), makes them highly attractive for advanced photovoltaic applications. This study presents a comparative analysis of the most effective chemical etchings developed for related thin film chalcogenide technologies to identify and understand the most appropriate surface chemical treatments for Sb2Se3 in substrate configuration, synthesized using a sequential process at very low temperatures (320 °C). Eight different chemical etchings were tested and investigated, and the results show that only KCN-based solutions lead to an improvement in the solar cell's performance, primarily due to an increase in the fill factor. Surface analysis of the samples shows that KCN etching produces very Sb-rich surfaces that do not affect the properties of the bulk. It is proposed that this Sb-rich interface inverts the surface polarity, creating a "buried junction" with CdS, thereby explaining the improvement of the fill factor of the devices, as confirmed by device modeling. The results of this study underscore the importance of surface management in low-temperature synthesized Sb2Se3 absorbers, where Sb-rich interfaces are crucial for achieving high-efficiency devices. This research contributes to ongoing efforts to improve the performance of Sb2Se3 thin film photovoltaic technology and could pave the way for the development of more efficient solar cells with optimized interfaces., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement No. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE); by the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41 and C44), MIRACLE project (TED2021-130265B-C21), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S). S.Y. is financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. I.C. acknowledges UPC and Banco Santander for the FPI-UPC scholarship (2021 FPI-UPC_060), and Z.J. acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). E.S. acknowledges the ICREA Academia program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CuFeS2/Cu2S/FeS2 Composite to Increase the Performance of Thin-Film Thermoelectric Generators Based on Sustainable Materials

  • Malagutti, Marcelo Augusto
  • Lohani, Ketan
  • Caño Prades, Ivan
  • Navarro-Güell, Alejandro
  • Bernard, Tanguy
  • Chiappini, Andrea
  • Saucedo, Edgardo
  • Ataollahi, Narges
  • Scardi, Paolo
Thermoelectric devices convert waste heat into electric energy but typically rely on scarce, expensive, and toxic Te-based materials. To address these limitations, we propose the Cu-Fe-S sulfide system as a nontoxic, abundant, and environmentally friendly alternative, with enhanced properties achieved through the synergistic behavior of CuFeS2, Cu2S, and FeS2 phases in a thin-film thermoelectric generator. These phases were synthesized using a three-step process: ball milling, thermal evaporation, and sulfurization of Cu/Fe precursors, with the CuFeS2/Cu2S/FeS2 phase ratio being tuned by adjusting the sulfurization temperature and duration. The presence of binary sulfides enhances the electric connectivity between CuFeS2 grains, which on their own exhibit poor electrical conductivity due to the formation of isolated grains during nucleation. The composite achieved a volumetric power density of 20 μW cm-3 K-1, outperforming similar Cu-based materials such as Cu2SnS3 and Cu2ZnSnS/Se4, mainly due to its optimized phase composition, higher density, and the superior Seebeck coefficient and electrical conductivity achieved through nanoinclusion. The eco-friendly, low-cost Cu-Fe-S system, synthesized through scalable ball milling and thermal evaporation, presents a promising alternative to conventional materials for sustainable thermoelectric generation., This study was funded by the Italian Ministry of Universitiesand Research (MUR), in the framework of the projectDICAM-EXC (Departments of Excellence 2023−2027, grantL232/2016). The authors acknowledge the Science Ministry ofSpain project numbers PID2020-116719RB-C41 (MATER-ONE) and TED2021-130265B-C21 (MIRACLE). E.S. isgrateful to the ICREA Academia program., Peer reviewed