Pasar al contenido principal

NUEVOS MATERIALES BASADOS EN CALCOGENUROS DE BAJA DIMENSION PARA INTEGRACION AVANZADA EN APLICACIONES TANDEM Y AGROVOLTICAS

PID2020-116719RB-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Raman scattering and spectroscopic ellipsometry studies of Sb2S3 and Sb2Se3 bulk polycrystals

  • Hajdeu-Chicarosh, Elena
  • Rotaru, Victoria
  • Levcenko, Sergiu
  • Serna, Rosalía
  • Victorov, Ivan A.
  • Guc, Maxim
  • Caballero, Raquel
  • Merino, José Manuel
  • Arushanov, Ernest
  • León, Máximo
6 pags., 5 figs., 2 tabs., Antimony sulfide (Sb2S3) and antimony selenide (Sb2Se3) compounds have attracted considerable attention for applications in different optoelectronic devices due to their notable optical and electrical properties, and due to the strong anisotropy of these properties along different crystallographic directions. However, the efficient use of these promising compounds still requires significant efforts in characterization of their fundamental properties. In the present study, Raman scattering and spectroscopic ellipsometry were used to investigate the vibrational and optical properties of Sb2Se3 and Sb2S3 bulk polycrystals grown by the modified Bridgman method. The first technique proved the presence of the desired Sb2S3 and Sb2Se3 phases in the analyzed ingots and confirmed the absence of any preferential crystallographic orientation at the measured surface of the samples. Spectroscopic ellipsometry was performed using a multi-oscillator Tauc-Lorentz dispersion model, and yielded a complex dielectric function of chalcogenides over the range 1.0-4.6 eV with a three phase model (ambient, surface and bulk materials). Finally, spectral data on the refractive index, the extinction coefficient, the absorption coefficient and the reflectivity at normal incidence, R, were obtained, which serve as a reference for the optical modeling of optoelectronic devices based on polycrystalline Sb2S3 and Sb2Se3 compounds., The authors from Moldova State University, Institute of Applied Physics appreciate the financial support from the Institutional Project ANCD 20.80009.5007.03. This work was also supported by the Spanish Ministry of Science and Innovation (MCIN) and the Agencia Estatal de Investigación (AEI) 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR grants ASSESS (TED2021-129666B-C21), the CELL2WIN (PID2019-104372RB-C32), the MaterOne (PID 2020-116719RB-C42), and the ALPHOMENA (PID2021-123190OB-I00). The authors from IREC belong to the MNT-Solar Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2021 SGR 01286) and are grateful for the support from European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). V. R. acknowledges the support from the predoctoral program AGAUR-FI ajuts (2023 FI-1 00436), Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. M. G. acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva fellowship (IJC2018-038199-I)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption

  • Lopez-Garcia, Alex J.
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Asensi López, José Miguel
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Izquierdo Roca, Víctor
  • Perez Rodriguez, Alejandro
This is the peer reviewed version of the following article: Lopez-Garcia, A. [et al.]. Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption. "Solar RRL", April 2023, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/solr.202200928. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., Herein, the fabrication of transparent solar cells based on nanometric (8 and30 nm) intrinsic hydrogenated amorphous siliconfilms (a-Si:H) and using oxidethinfilms as transparent carrier selective contacts are reported. The ultrathindevices present photovoltaic effect and high average visible transmittance (AVT).Additionally, they display a shifted spectral response toward short wavelengths.Glass/fluorine-doped tin oxide (FTO)/aluminum-doped zinc oxide (AZO)/a-Si:H/MoO3/indium tin oxide (ITO) prototypes are shown, presenting AVT=35% andphotovoltaic conversion efficiency (PCE)=2% for a device with a 30 nm a-Si:Hfilm. This yields a light utilization efficiency (LUE) of 0.7%, a record up to this datefor inorganic oxide-based transparent solar cells. For devices including an 8 nma-Si:Hfilm, the AVT reaches 66% with a PCE=0.6% (LUE=0.4%). These highAVT values are comparable or even superior in some cases to those achieved forpure oxide devices. Thesefindings confirm the potential of the proposedarchitectures for the development of highly transparent energy harvesters asfunctional components in building-integrated photovoltaics (BIPV), agrophoto-voltaics (APV), sensors and other low-power devices. In addition, these devicesare fabricated with earth-abundant materials and with up-scalable techniquesthat can allow for a feasible implementation., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption

  • Lopez-Garcia, Alex J.
  • Voz Sánchez, Cristóbal
  • Asensi López, José Miguel
  • Puigdollers i González, Joaquim
  • Izquierdo Roca, Víctor
  • Perez Rodriguez, Alejandro
This is the peer reviewed version of the following article: Lopez-Garcia, A. [et al.]. Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption. "Solar RRL", April 2023, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/solr.202200928. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., Herein, the fabrication of transparent solar cells based on nanometric (8 and30 nm) intrinsic hydrogenated amorphous siliconfilms (a-Si:H) and using oxidethinfilms as transparent carrier selective contacts are reported. The ultrathindevices present photovoltaic effect and high average visible transmittance (AVT).Additionally, they display a shifted spectral response toward short wavelengths.Glass/fluorine-doped tin oxide (FTO)/aluminum-doped zinc oxide (AZO)/a-Si:H/MoO3/indium tin oxide (ITO) prototypes are shown, presenting AVT=35% andphotovoltaic conversion efficiency (PCE)=2% for a device with a 30 nm a-Si:Hfilm. This yields a light utilization efficiency (LUE) of 0.7%, a record up to this datefor inorganic oxide-based transparent solar cells. For devices including an 8 nma-Si:Hfilm, the AVT reaches 66% with a PCE=0.6% (LUE=0.4%). These highAVT values are comparable or even superior in some cases to those achieved forpure oxide devices. Thesefindings confirm the potential of the proposedarchitectures for the development of highly transparent energy harvesters asfunctional components in building-integrated photovoltaics (BIPV), agrophoto-voltaics (APV), sensors and other low-power devices. In addition, these devicesare fabricated with earth-abundant materials and with up-scalable techniquesthat can allow for a feasible implementation., Peer Reviewed, Postprint (published version)