Pasar al contenido principal

TECNOLOGIAS FOTOVOLTAICAS DE CAPA DELGADA PARA CELULAS SOLARES (SEMI)TRANSPARENTES COMPATIBLES CON EL DESARROLLO DE VENTANAS SOLARES NO INTRUSIVAS

PID2019-104372RB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Raman scattering and spectroscopic ellipsometry studies of Sb2S3 and Sb2Se3 bulk polycrystals

  • Hajdeu-Chicarosh, Elena
  • Rotaru, Victoria
  • Levcenko, Sergiu
  • Serna, Rosalía
  • Victorov, Ivan A.
  • Guc, Maxim
  • Caballero, Raquel
  • Merino, José Manuel
  • Arushanov, Ernest
  • León, Máximo
6 pags., 5 figs., 2 tabs., Antimony sulfide (Sb2S3) and antimony selenide (Sb2Se3) compounds have attracted considerable attention for applications in different optoelectronic devices due to their notable optical and electrical properties, and due to the strong anisotropy of these properties along different crystallographic directions. However, the efficient use of these promising compounds still requires significant efforts in characterization of their fundamental properties. In the present study, Raman scattering and spectroscopic ellipsometry were used to investigate the vibrational and optical properties of Sb2Se3 and Sb2S3 bulk polycrystals grown by the modified Bridgman method. The first technique proved the presence of the desired Sb2S3 and Sb2Se3 phases in the analyzed ingots and confirmed the absence of any preferential crystallographic orientation at the measured surface of the samples. Spectroscopic ellipsometry was performed using a multi-oscillator Tauc-Lorentz dispersion model, and yielded a complex dielectric function of chalcogenides over the range 1.0-4.6 eV with a three phase model (ambient, surface and bulk materials). Finally, spectral data on the refractive index, the extinction coefficient, the absorption coefficient and the reflectivity at normal incidence, R, were obtained, which serve as a reference for the optical modeling of optoelectronic devices based on polycrystalline Sb2S3 and Sb2Se3 compounds., The authors from Moldova State University, Institute of Applied Physics appreciate the financial support from the Institutional Project ANCD 20.80009.5007.03. This work was also supported by the Spanish Ministry of Science and Innovation (MCIN) and the Agencia Estatal de Investigación (AEI) 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR grants ASSESS (TED2021-129666B-C21), the CELL2WIN (PID2019-104372RB-C32), the MaterOne (PID 2020-116719RB-C42), and the ALPHOMENA (PID2021-123190OB-I00). The authors from IREC belong to the MNT-Solar Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2021 SGR 01286) and are grateful for the support from European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). V. R. acknowledges the support from the predoctoral program AGAUR-FI ajuts (2023 FI-1 00436), Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. M. G. acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva fellowship (IJC2018-038199-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semitransparent Wide Bandgap Cu2ZnGe(S,Se)4Thin-FilmSolar Cells: Role of the Sulfurization Process

  • Ruiz-Perona, Andrea
  • Palma-Lafuente, David
  • Sánchez, Yudania
  • Guc, Maxim
  • Kodalle, Tim
  • Salem, Mohamed Ould
  • Placidi, Marcel
  • Serna, Rosalía
  • Pérez-Rodríguez, Alejandro
  • Merino, José Manuel
  • Caballero, Raquel
9 pags., 6 figs., 2 tabs., Semitransparent solar cells are very attractive due to the increasing integration in daily life. Kesterite-type based thin-film solar cells stand out because of its environmentally benign composition and outstanding stability. Herein, the influence of the back contact (Mo/V2O5/FTO or Mo/FTO) and thickness of Cu2ZnGe(S,Se)4 (CZGSSe) absorber layer, grown by sulfurization of coevaporated CZGSe, is investigated. To increase the transparency, thinner absorber layers with higher bandgap energy are produced. A double sulfur gradient through the CZGSSe layer with a considerable S content near the back contact and the formation of Mo(S,Se)2 phase at the back interface is detected for an absorber of only 400 nm thickness. Efficiencies of 3.1% and 2.7% are achieved for 1.2 μm CZGSSe-based devices with Eg of 1.73 and 1.86 eV, respectively, while enabling transmittance values higher than 20% in the near-infrared (NIR). The highest transmittance, 40% in the NIR, is achieved for the 400 nm CZGSSe-based solar cells with Eg of 2.1 eV; however, a significant reduction of these devices’ performance is obtained due to the presence of ZnS secondary phase and a different back-contact interface formation. This work presents the first promising semitransparent CZGSSe solar cells, opening new paths of applications., This work was supported by CELL2WIN (PID2019-104372RB-C32), InnoPV(PID2022-140226OB-C33) funded by MCIN/AEI/ 10.13039/501100011033and by“ERDF A way of making Europe,”ASSESS (TED2021-129666B-C21and TED2021-129666B-C22) funded by MCIN/AEI/10.13039/501100011033 by the“European Union NextGenerationEU/PRTR”andthe European Project INFINITE-CELL (H2020-MSCA-RISE-2017-777968).M.P. and M.G. acknowledge thefinancial support from the SpanishMinistry of Science, Innovation and Universities within the Ramón yCajal (grant no. RYC-2017-23758) and Ramón y Cajal (grant no.RYC2022-035588-I) programs, respectively. A.R.P. also acknowledgesthefinancial support from Community of Madrid within YouthEmployment Program (grant no. PEJD-2017-PRE/IND-4062)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfurization of co-evaporated Cu2ZnGeSe4 layers: Influence of the precursor cation's ratios on the properties of Cu2ZnGe(S,Se)4 thin films

  • Palma-Lafuente, David
  • Diez-Silva, Pablo
  • Rotaru, Victoria
  • Jawhari, Tariq
  • Bertram, Tobias
  • Reyes-Figueroa, Pablo
  • Guc, Maxim
  • Merino, José Manuel
  • Caballero, Raquel
12 pages, 16 figures, 1 table, Cu2ZnGe(S,Se)4 (CZGSSe) thin films were fabricated by sulfurization of co-evaporated Cu2ZnGeSe4 (CZGSe) thin films. The goal of this work is to investigate the effect of the composition of CZGSe layers on the structural, vibrational and morphological properties of CZGSSe compounds. Different CZGSe layers with different cation's ratios (Cu-poor, Zn-rich; Cu-poor, Zn-stoichiometric and Cu-poor, Ge-rich) were investigated before and after the sulfurization process. Break-off and different cooling experiments during sulfurization of CZGSe were also carried out. Break-off experiments revealed that 440 °C is the key temperature to incorporate S into CZGSe lattice, being required 480 °C to enhance the interdiffusion of the elements. Fast cooling experiments during sulfurization appeared to be a promising strategy to avoid the formation of secondary phases. All the samples showed the CZGSSe kesterite phase, as well as higher S content and different secondary phases at the surface. These experiments demonstrate that a minimum Ge content in CZGSe is required to assist the growth of CZGSSe grains and develop a compact structure. These results indicate the importance of controlling the cation's ratio of CZGSe to develop high quality wide band gap CZGSSe compounds, which can be very attractive for different applications., This work was supported by Spanish Ministry of Science, Innovation and Universities Project (CELL2WIN: PID2019-104372RB-C32) and European Project INFINITE-CELL (H2020-MSCA-RISE-2017-777968). DPL acknowledges the financial support from Spanish Ministry of Science and Innovation within FPI Program. MG acknowledges the financial support from Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva Program (IJC2018-038199-I). Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (Ref. 2017 SGR 862). The authors acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and European Union (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wide band gap Cu2ZnGe(S,Se)4 thin films and solar cells: Influence of Na content and incorporation method

  • Ruiz-Perona, Andrea
  • Guc, Maxim
  • Sánchez, Yudania
  • Kodalle, Tim
  • Merino, José M.
  • León, Máximo
  • Caballero, Raquel
9 pages, 9 figures, 2 tables, The influence of the Na content and incorporation procedure into Cu2ZnGe(S,Se)4 (CZGSSe) thin films and solar cells is investigated. The effects of the presence/absence of Se during the deposition of a 15 nm thick NaF layer before and/or after the Cu2ZnGeSe4 (CZGSe) co-evaporation, are compared. Both the Na content, and Na-supply method significantly influence the incorporation of S into the CZGSe lattice and its distribution in the absorber. A [S]/([S] + [Se])-gradient throughout the CZGSSe layers is observed for all the samples and correlated with effects induced by the Na incorporation procedure. For instance, the evaporation of Se together with NaF leads to an increased S concentration in the surface-region of the CZGSSe layer and a modified surface morphology. CZGSSe-based solar cells with band gap energies of about 2 eV are obtained, regardless of the NaF addition method used, while the absence of the NaF layer reduces the S incorporation and the Eg. However, the evaporation of Se together with NaF results in higher Eg and open circuit voltage VOC, probably related to a higher S accumulation near the surface, demonstrating the importance of the [S]/([S] + [Se]) distribution. CZGSSe-based photovoltaic devices with efficiency of 3.2 % and Eg of 2 eV are obtained., This work was supported by Spanish Ministry of Science, Innovation and Universities Project (WINCOST: ENE2016-80788-C5-2-R, CELL2WIN: PID2019-104372RB-C32) and European Project INFINITE-CELL (H2020-MSCA-RISE-2017-777968). MG acknowledges the financial support from Spanish Ministry of Science, Innovation and Universities within the Juan de la Cierva Program (IJC2018-038199-I). Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (Ref. 2017 SGR 862). The authors acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/ NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and European Union (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Routes to develop a [S]/([S]+[Se]) gradient in wide band-gap Cu2ZnGe(S,Se)4 thin-film solar cells

  • Ruiz-Perona, Andrea
  • Gurieva, Galina
  • Sun, Michael
  • Kodalle, Tim
  • Sánchez, Yudania
  • Grossberg, Maarja
  • Merino, José Manuel
  • Schorr, Susan
  • León, Máximo
  • Caballero, Raquel
9 pages, 6 figures, 2 tables, Wide band-gap kesterite-based solar cells are very attractive to be used for tandem devices as well as for semi-transparent photovoltaic cells. Here, Cu2ZnGe(S,Se)4 (CZGSSe) thin films have been grown by sulfurization of co-evaporated Cu2ZnGeSe4. The influence of a NaF precursor layer and of a Se capping film on CZGSSe absorbers and solar cells has been investigated. It has been found that the distribution of [S]/([S]+[Se]) through the CZGSSe absorber layer is strongly dependent on the Na content. Na promotes the diffusion of S towards the bulk of the absorber layer. Thicker NaF layers>6 nm lead to a higher S content in the bulk of the absorber layer, but to a decreased accumulation of sulphur at the surface, as detected by GIXRD, GD-OES, and Raman spectroscopy measurements. A relationship between Jsc, FF and Na-content supplied was found; higher Na content resulted in improved solar cell efficiencies. It has also been possible to modify the [S]/([S]+[Se])-gradient throughout the CZGSSe film by the absence of the Se capping layer, achieving devices with 2.7% performance and Eg = 2.0 eV. This work reveals two ways to control the [S]/([S]+[Se]) depth-profile to produce wide band gap CZGSSe absorber layers for efficient solar cells., This work was supported by Spanish Ministry of Science and Innovation Project WINCOST (ENE2016-80788-C5–2-R), CELL2WIN (PID2019-104372RB-C32) and European Project INFINITE-CELL (H2020-MSCA-RISE-2017–777968). ARP also acknowledges financial support from Community of Madrid within Youth Employment Program (PEJD-2017-PRE/IND-4062). M.G. also acknowledges financial support from L′Oréal Baltic For Women in Science Programme and from the European Regional Development (Project TK141)., Peer reviewed