Pasar al contenido principal

DISEÑO DE CATALIZADORES MULTIFUNCIONALES PARA LA CONVERSION DE GAS DE SINTESIS RICO EN CO2 EN COMBUSTIBLES LIQUIDOS SOSTENIBLES, EN UNA UNICA ETAPA, VIA SINTESIS DE FTS Y HCR

PID2021-126876OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enroute to the Carbon-Neutrality Goals via the Targeted Development of Ammonia as a Potential Nitrogen-Based Energy Carrier

  • Nawaz, Muhammad Asif
  • Blay-Roger, Rubén
  • Saif, Maria
  • Meng, Fanhui
  • González-Arias, Judith
  • Miao, Baoji
  • Bobadilla, Luis F.
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
The reliance of a future carbon-free horizon is strongly aligned with the long-term energy storage avenues which are completely derived from renewable energy resources. Ammonia with its high energy content and density can perform as a decent candidate for buffering the short-term storage options. However, the current NH3 production majorly feeding the current huge desire for ammonia is dominated by the conventional nonrenewable Haber-Bosch (H-B) process route, thus continuously damaging the target of carbon neutrality goals. High-purity hydrogen (H2) gas is an essential precursor for the H-B process; however, it is a significant energy consumer (about 2% of the global energy supply) and contributes over 420 million tons of CO2/annum. Therefore, the research on the renewable synthesis of nitrogen-based energy carriers (such as ammonia) from the direct electrochemical, photocatalytic, or plasma catalytic processes; its conversion; and utilization to the potential derivatives has been a hot topic in the past few decades. A prospective analysis of the highly appealing processes has been summarized in this study, which could facilitate the adaption of renewable alternatives as an effective approach for zero carbon emission, paving the excellent pathways along the road to the development of nitrogen-based energy technologies, especially the targeted development of ammonia. Further, this Review covers the current and future impacts of the H-B process, the development of aspiring ammonia synthesis routes (via electro, photo, bio, chemical loop, or plasma catalysis), and its conversion and utilization to the renewable derivatives in terms of fabrication of model catalysts, advanced characterization technology, and efficient device design., This work has been supported by the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe, & SMART-FTS (ref: PID2021-126876OB-I00), and also sponsored by the Key Scientific Research project of Colleges and Universities in Henan Province (21A430009) & (222103810045). Authors also pay thanks to “Macrovector/Freepik” for providing the services in designing the TOC graphics. The authors declare no competing interests, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Need for Flexible Chemical Synthesis and How Dual-Function Materials Can Pave the Way

  • Merkouri, Loukia-Pantzechroula
  • Paksoy, Aysun Ipek
  • Ramírez-Reina, Tomás
  • Duyar, Melis S.
Since climate change keeps escalating, it is imperative that the increasing CO2 emissions be combated. Over recent years, research efforts have been aiming for the design and optimization of materials for CO2 capture and conversion to enable a circular economy. The uncertainties in the energy sector and the variations in supply and demand place an additional burden on the commercialization and implementation of these carbon capture and utilization technologies. Therefore, the scientific community needs to think out of the box if it is to find solutions to mitigate the effects of climate change. Flexible chemical synthesis can pave the way for tackling market uncertainties. The materials for flexible chemical synthesis function under a dynamic operation, and thus, they need to be studied as such. Dual-function materials are an emerging group of dynamic catalytic materials that integrate the CO2 capture and conversion steps. Hence, they can be used to allow some flexibility in the production of chemicals as a response to the changing energy sector. This Perspective highlights the necessity of flexible chemical synthesis by focusing on understanding the catalytic characteristics under a dynamic operation and by discussing the requirements for the optimization of materials at the nanoscale., Financial support for this work has been obtained from the Doctoral College at the University of Surrey and the Engineering and Physical Sciences Research Council grant EP/X000753/1. This work is also partially sponsored by the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058) and the Spanish Ministry of Science and Innovation through the project PID2021-126876OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic insights into methanol carbonylation to methyl acetate over an efficient organic template-free Cu-exchanged mordenite

  • Luque-Álvarez, L.A.
  • González-Arias, Judith
  • Romero-Sarria, F.
  • Ramírez-Reina, Tomás
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
Currently, acetic acid is produced via the carbonylation reaction of methanol with the main route entailing the use of homogeneous noble metal-based catalysts, which has certain limitations, including the use of polluting alkyl halide promoters and difficulty in catalyst recovery. To overcome these challenges, the exploration of alternative methods utilizing heterogeneous catalysts, particularly zeolites with copper as a redox center, has gained attention. Nonetheless, the conversion and selectivity obtained are sought after to compete against the homogeneous route. Therefore, a deeper understanding of the reaction and mechanism is needed to determine the weak points and overcome them. In this study, we propose the use of time-resolved operando DRIFTS-MS to study the methanol carbonylation reaction over a Cu-H-MOR catalyst. The study aimed to propose a reaction mechanism through an investigation of the behavior of the catalyst, including potential identification of the location of the copper redox center in the zeolite. The catalytic performance of the Cu-H-MOR catalyst was also evaluated, demonstrating its activity and stability in the methanol carbonylation reaction. The operando DRIFTS-MS results provide insights into the reaction mechanism and the involvement of the acid and redox centers in the process. Based on the findings, we propose a reaction mechanism for methanol carbonylation on Cu-H-MOR zeolite: (i) methanol dehydration, (ii) CO insertion into methoxide groups, (iii) reaction between dimethyl ether and acetyl groups, and (iv) hydrolysis of methyl acetate. Overall, we believe that this work contributes to a deeper understanding of the heterogeneous route for acetic acid production and offers potential avenues for optimizing the process., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia e Innovacion through the project SMART-FTS (PID2021-126876OB-I00). Ligia A. Luque-& Aacute;lvarez thanks VI-PPITUS (University of Sevilla) for her current predoctoral contract. This work has been supported by the FJC2021-047672-I grant co-financed by MCIN/AEI/10.13039/501100011033 and the European Union Next Generation EU/PRTR funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen production by catalytic aqueous-phase reforming of waste biomass: a review

  • González-Arias, Judith
  • Zhang, Zhien
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
The rising adverse effects of climate change call for a rapid shift to low-carbon energy and reducing our dependence on fossil fuels. For that, biorefineries appear as promising alternatives to produce energy, chemicals, and fuels using biomass and waste as raw materials. Here, we review catalytic aqueous-phase reforming to convert biomass and organic waste carbohydrates into renewable hydrogen, with focus on reforming basics; catalyst design; reforming of model compounds, wastewater and biomass; economics and life cycle assessment. We found that platinum and palladium are technically highly effective, yet their high price may limit upscaling. Alternatively, addition of tin to nickel gives acceptable results and improves hydrogen selectivity from 35 to 90%. We observed that hydrogen production decreases from 14% for crude glycerol to 2% for pure glycerol, thus highlighting the need to do experiments with real wastewater. The rare experiments on real wastewater from brewery, juice, tuna, and cheese industries have given hydrogen production rates of up to 149.7 mg/L. Aqueous-phase reforming could be shortly competitive with prices around 3–6 USD per kg of hydrogen, which are nearing the current market prices of 2–3 USD per kg., FJC2021-047672-I grant co-financed by MCIN/AEI/https:// doi.org/10.13039/501100011033 and the European Union NextGenerationEU/PRTR funds-(J. Gonzalez-Arias); NICER-BIOFUELS project (ref: PLEC2021-008086), sponsored by MCIN/AEI/https://doi.org/10. 13039/501100011033 Next Generation Europe & SMART-FTS project (ref: PID2021-126876OB-I00)-(T.R. Reina)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Subnanometric Pt clusters dispersed over Cs-doped TiO2 for CO2 upgrading via low-temperature RWGS: operando mechanistic insights to guide an optimal catalyst design

  • Torres-Sempere, Guillermo
  • Blay-Roger, Rubén
  • Luque-Álvarez, Ligia A.
  • Santos, José L.
  • Bobadilla, Luis F.
  • Pastor-Pérez, Laura
  • Centeno, Miguel Ángel
  • Hernández, Willinton Y.
  • Yousef, Ibraheem
  • Odriozola, José Antonio
  • Ramírez-Reina, Tomás
The RWGS reaction is gathering momentum as an effective route for CO2 valorisation and given its endothermic nature the challenge lies in the design of active low-temperature catalysts. Herein we have designed two catalysts based on subnanometric Pt clusters providing effective CO2 conversion and, more importantly, high CO selectivity in the low-temperature range. The impact of Cs as a dopant in the catalyst's formulation is crucial leading to full selectivity at 300 °C. The reaction mechanisms for the studied systems namely Pt/TiO2 and PtCs/TiO2 are significantly different due to the presence of the alkali promoter. The presence of Cs neutralises the hydroxide groups of the TiO2 surface, changing the reaction pathway. The Pt/TiO2 catalyst follows a redox mechanism where CO2 dissociates to CO in the oxygen vacancies, and then these vacancies are recovered by the migration of H2 by spill over phenomena. On the other hand, the Cs doped catalyst has two possible mechanism pathways: the (ii) formyl/acyl pathway, where -CHO species are formed and, depending on the reaction conditions, evolve to CO gas or oxygenated compounds, and (ii) frustrated Lewis pair (FLP) assisted CO2 reduction route, in which the FLP induces the heterolytic dissociation of H2 and the subsequent hydrogenation of CO2 to CO. The latter route enabled by Cs-doping combined with the subnanometric Pt domains seems to be responsible for the excellent catalytic behaviour leading to fully selective low-temperature RWGS systems and thus unlocking new possibilities for less energy demanding CO2 valorisation units based on RWGS., The team at the University of Seville acknowledges financial support from the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref: PID2021-126876OB-I00). Authors also acknowledge access to ALBA's facilities and support provided by ALBA's staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of topology framework of microporous solids on methanol carbonylation: An operando DRIFTS-MS study

  • Luque-Álvarez, L. A.
  • Serrano-Cruz, M.
  • González Castaño, M.
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
Methanol carbonylation was evaluated over heterogeneous catalysts based on Cu-exchanged zeolitic materials with different topology: Cu@MOR, Cu@FER, and Cu@ZSM-5. Despite the similar Si/Al ratios, it is crucial to acknowledge that the acid strength is influenced by the framework topology, as supported by the NH3-TPD results. This, along with other characterization techniques allowed us to estimate the impact of pore size and pore distribution in these microporous materials on catalytic performance. The channel structure influenced catalytic parameters such as conversion and selectivity. The higher methanol conversion achieved on Cu@FER shows the importance of Brønsted acid sites and redox centres location regarding the topology of the material. Concerning the selectivity, the production of acetic acid was endorsed by the 12-MR (MOR) channels, methyl acetate's production by the 10-MR (FER) channels. Finally, the presence of 6-MR (ZSM-5) channels led to a complete selectivity towards DME production. The reaction mechanism was elucidated via operando DRIFTS-MS and results revealed a bifunctional mechanism in which methanol adsorbs and dehydrates on acidic Brønsted sites and CO is activated over Cu+ species., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia e Innovación through the project SMART-FTS (PID2021-126876OB-I00). Miriam González Castaño acknowledges the University of Sevilla for her postdoctoral contract Maria Zambrano (MZAMBRANO-2021-198). Ligia A. Luque Álvarez thanks VI-PPITUS (University of Sevilla) for her current predoctoral contract. Moreover, Melania Serrano Cruz thanks the SECAT (Sociedad Española de Catálisis) for the grant of a scholarship to carry out the master's thesis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the CO2 capture and conversion mechanism of a NiRu-Na2O switchable dual-function material in various CO2 utilisation reactions

  • Merkouri, Loukia Pantzechroula
  • Martín-Espejo, Juan Luis
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
  • Penkova, Anna
  • Ramírez-Reina, Tomás
  • Duyar, Melis S.
Time-resolved operando DRIFTS-MS was performed to elucidate the CO2 capture and conversion mechanisms of a NiRuNa/CeAl DFM in CO2 methanation, reverse water-gas shift, and dry reforming of methane. CO2 was captured mainly in the form of carbonyls and bidentate carbonates, and a spillover mechanism occurred to obtain the desired products., This research was funded by the School of Chemistry and Chemical Engineering and the Doctoral College of the University of Surrey. This work was partially sponsored by the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058). L. P. Merkouri acknowledges the Erasmus+ programme, which allowed her to conduct part of the experiments in Seville, Spain. L.-P. Merkouri also thanks Dr Vlad Stolojan of the Department of Electrical and Electronic Engineering for his assistance with TEM training. The team at University of Seville also acknowledge financial support from the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe SMART-FTS (ref: PID2021-126876OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monitoring the influence of steam on highly-active rhodium catalyst during the combined reforming of biogas by transient and steady-state operando spectroscopic studies

  • Garcilaso, Victoria
  • Blay-Roger, Rubén
  • González-Castaño, Miriam
  • Bobadilla, Luis F.
  • Centeno, Miguel Ángel
  • Odriozola, José A.
The impact derived from incorporating water into CH4/CO2 biogas stream for the generation of syngas was investigated over the Rh/MgAl2O4 catalyst using operando steady-state and transient DRIFT spectroscopy coupled with MS. The incorporation of steam resulted in improved CH4 conversion rates and attained syngas streams with higher H2/CO ratios. It was demonstrated that in the presence of steam, the generation of CHxO species through the reaction of CO* with active *OH species is favored at the metal support surface. Besides, the enhanced resistance delivered by water molecules towards deactivating the coking phenomena was associated with easier carbonaceous decomposition and the exposition of the very active Rh (100) surfaces for methane decomposition. The Rh/MgAl2O4 catalyst was demonstrated to be an effective catalyst for the production of H2-rich syngas streams. More importantly, the insights reported herein provide new evidences regarding the impact of steam on biogas reforming reactions., Dra. Miriam Gonzalez acknowledges to the EMERGIA program of the Junta de Andalucia by the EMC21_00052 contract. The authors acknowledge financial support from Spanish Ministry of Science through the projects NICER-BIOFUELS (PLEC2021-008086) financed by Next Generation European Funds and SMART-FTS (PID2021-126876OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthetic natural gas production using CO2-rich waste stream from hydrothermal carbonization of biomass: Effect of impurities on the catalytic activity

  • González-Arias, J.
  • Torres-Sempere, G.
  • Villora-Picó, J. J.
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
The utilization of biomass and bio-waste, particularly through hydrothermal processes, has shown promise as a technology for converting these materials into valuable products. While most research has traditionally focused on the solid and liquid byproducts of these hydrothermal treatments, the gaseous phase has often been overlooked. This study specifically investigates the conversion of off-gases produced during hydrothermal carbonation (HTC) into synthetic natural gas, offering a readily marketable product with economic potential. Although the methanation of conventional flue gases has been extensively studied, dealing with non-standard off-gases from processes like HTC presents challenges due to the presence of minor impurities like CO and CH4. This novel research seeks to experimentally evaluate the methanation of HTC off-gases using nickel-based catalysts and analyze how these impurities affect the catalytic performance. The studied catalysts include nickel supported by ceria and alumina, as well as alumina supported nickel-cobalt systems. The results demonstrate that these catalysts exhibit high CO2 conversion and CH4 selectivity under ideal gas conditions. However, when real gas compositions with impurities are considered, CO2 conversion decreases at lower temperatures (ca. 20% lower conversion for real gas vs. ideal), probably due to side reactions such as CH4 cracking. This difference becomes less pronounced at higher temperatures. Nevertheless, the catalysts perform satisfactorily, especially at temperatures exceeding 350 °C. In conclusion, this study sheds light on the methanation of HTC off-gases and underscores the significance of understanding how impurities in real gases impact the process, providing potential directions for future research., This work has been supported by the FJC2021–047672-I grant co-financed by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR funds. This work was also partially sponsored by Spanish Ministry of Science and Innovation through the projects PLEC2021–008086 sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and PID2021–126876OB-I00. This work was also partially sponsored by European Commission through the H2020-MSCARISE-2020 BIOALL project (Grant Agreement: 101008058)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrating catalytic tandem reactions for the next generation of biofuels: A perspective

  • Blay-Roger, Rubén
  • Carrasco-Ruiz, Sergio
  • Ramírez-Reina, Tomás
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
  • Nawaz, Muhammad Asif
In this piece, we explore the transformative potential of sustainable biofuel production as a solution to the energy crisis and a pivotal element in realizing the environmental and societal ambitions of Society 5.0. Through a critical examination of “bottom-up” and “top-down” strategies for converting bio-feedstocks sourced from anthropogenic activities into renewable fuels, the work underscores the need for innovation in catalysts and process intensification. By highlighting the advances and challenges in harnessing unconventional feedstocks and integrating renewable energy, this work points to a future where biofuels stand as a cornerstone of a sustainable energy landscape. The significance of this discussion extends beyond the technical realm, offering a vision for a circular economy that reduces dependence on fossil fuels, addresses climate change, and promotes global energy security. It calls for a united front among researchers, industry leaders, and policymakers to drive the biofuel sector toward efficiency, scalability, and widespread adoption., The authors acknowledge financial support from the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref. PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref. PID2021-126876OB-I00). S.C.-R. would also like to acknowledge the Spanish Ministry of Science for an FPU grant (FPU21/04873), and M.A.N. acknowledges the Spanish Ministry and the European Union for the grant JDC2022-048533-I financed by MCIN/AEI/10.13039/501100011033. R.B.-R. designed the overall strategy and roadmap in the introduction, RWGS, and RWGS-FTS sections. S.C.-R. managed to combine the APR + HDO part, and T.R.R. and L.F.B. conceived the topic and helped in revising the professional summary. J.A.O. helped with supervision and organizing the ideas and provided the broad picture, critically important for intellectual content. M.A.N. participated in RWGS-FTS + HCR sections and helped with the overall consistency among different processes. The authors declare no competing interests., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive Surface Explored by NAP-XPS: Why Ionic Conductors Are Promoters for Water Gas Shift Reaction

  • García-Moncada, Nuria
  • Penkova, Anna
  • González-Castaño, Miriam
  • Odriozola, José A.
Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) experiments have been carried out in N2 and N2-H2O atmospheres on a Pt-based catalyst physically mixed with an Eu-doped ZrO2 ionic conductor as a function of temperature under realistic conditions of the water gas shift (WGS) reaction. This work aims to demonstrate the significant effect of having active H2O on the ionic conductor surface at reaction temperatures to provide it to Pt metal sites. The ionic conductor, Eu-doped zirconia matrix, presents defects (oxygen vacancies, Ov) that allows upon H2O dissociation the formation of a hydrogen-bonded molecular water layer favoring diffusion through a Grotthuss mechanism below 300 °C. In the presence of H2O, the Ov are occupied by hydroxyl species as observed in the Eu 4d spectra, which differentiate two types of Eu oxidation states. The Eu3+-to-Eu2+ atomic ratio increases with the occupancy of the Ov by hydroxyls. Moreover, while the Pt-based catalyst alone is unable to create Pt-OH bonds, the physical mixture of the Pt-based catalyst and the ionic conductor allows the formation of Pt-OH bonds from room temperature up to 300 °C. These data demonstrate that the increase in molecular water concentration on the ionic conductor surface up to 300 °C acts as a reservoir to provide water to the Pt surface, enhancing the catalyst performance in the WGS reaction, supporting the importance of the surface H2O concentration in the reaction kinetics., The authors thank SMART FTS project (PID2021-126876OB-I00, Plan Estatal 2021-2023, Ministerio de Cienciae Innovación) and NICER BIOFUELS project (PLEC2021-008086, Plan Estatal 2017-2020, Ministerio de Ciencia eInnovación) for funding, and Servicios Generales deInvestigación−XPS in Centro de Investigación, Tecnología eInnovación de la Universidad de Sevilla (CITIUS) for theavailability of the NAP-XPS system, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redefining the Symphony of Light Aromatic Synthesis Beyond Fossil Fuels: A Journey Navigating through a Fe-Based/HZSM-5 Tandem Route for Syngas Conversion

  • Nawaz, Muhammad Asif
  • Blay-Roger, Rubén
  • Saif, Maria
  • Meng, Fanhui
  • Bobadilla, Luis F.
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
The escalating concerns about traditional reliance on fossil fuels and environmental issues associated with their exploitation have spurred efforts to explore eco-friendly alternative processes. Since then, in an era where the imperative for renewable practices is paramount, the aromatic synthesis industry has embarked on a journey to diversify its feedstock portfolio, offering a transformative pathway toward carbon neutrality stewardship. This Review delves into the dynamic landscape of aromatic synthesis, elucidating the pivotal role of renewable resources through syngas/CO2 utilization in reshaping the industry's net-zero carbon narrative. Through a meticulous examination of recent advancements, the current Review navigates the trajectory toward admissible aromatics production, highlighting the emergence of Fischer-Tropsch tandem catalysis as a game-changing approach. Scrutinizing the meliorated interplay of Fe-based catalysts and HZSM-5 molecular sieves would uncover the revolutionary potential of rationale design and optimization of integrated catalytic systems in driving the conversion of syngas/CO2 into aromatic hydrocarbons (especially BTX). In essence, the current Review would illuminate the path toward cutting-edge research through in-depth analysis of the transformative power of tandem catalysis and its capacity to propel carbon neutrality goals by unraveling the complexities of renewable aromatic synthesis and paving the way for a carbon-neutral and resilient tomorrow., The authors acknowledge financial support from Spanish Ministry of Science through the projects: (1) NICER-BIOFUELS (PLEC2021-008086), financed by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (PID2021-126876OB-I00); (2) FPI grant (PRE2022-101636) financed by MICIN/AEI/10.13039/501100011033 & the FSE+; and (3) Spanish Ministry and the European Union for the grant (JDC2022-048533-I) financed by MCIN/AEI/10.13039/501100011033. The authors also thank “Macrovector/Freepik” for providing the services in the design of the TOC and graphics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the impact of nanoshaped ceria in the methanol decomposition reaction pathway for clean energy production

  • Luque-Álvarez, Ligia A.
  • Núñez-Carballo, Ana
  • Lacroix, Bertrand
  • Sánchez de Armas, Rocío
  • Centeno, Miguel Ángel
  • Pastor-Pérez, Laura
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
The effect of facet exposure in ceria nanostructures on the catalytic properties of Pd/CeO₂ during methanol decomposition was investigated. The results showed the structure sensitive nature of this reaction, with the catalytic activity depending on the facet exposed in the ceria nanostructures. Operando DRIFTS-MS and DFT calculations demonstrated that methanol decomposition proceeds mainly via two reaction pathways depending on the exposed nanofacets: the formate and the formaldehyde pathways. The formaldehyde pathway is inhibited on the (111) nanofacets, where only the formate pathway is energetically favoured, in contrast to the (100) and (110) facets. Superior specific catalytic activity was observed in the catalyst with octahedral morphology, attributed to the higher number of oxygen vacancies per unit surface area, which facilitates the decomposition of formates. By gaining a better understanding of the relationship between the shape control of the catalyst, this work contributes to the collective effort of discovering and implementing sustainable low-carbon energy solutions., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia e Innovación through the project SMART-FTS (PID2021–126876OB-I00). Ligia A. Luque Álvarez thanks VI-PPITUS (University of Sevilla) for her current predoctoral contract. Bertrand Lacroix thanks VI-PPITUS of the University of Sevilla (contract USE-22972-H) and the EMERGIA program of Regional Government of Andalusia (EMC21_00427 contract)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Densely embedded homogeneous FeO<inf>x</inf> nanoparticles in N-doped carbon frameworks: A 3D scaffold catalyst for high-temperature Fischer-Tropsch synthesis

  • Xi, Mengmeng
  • Cheng, Yang
  • Meng, Fanhui
  • Yao, Xuefang
  • Nawaz, Muhammad Asif
  • Saif, Maria
  • Li, Zhong
  • Ramírez-Reina, Tomás
Fe-based catalysts show great promise in advancing the application of high-temperature Fischer-Tropsch synthesis (HT-FTS) for producing value-added chemicals and liquid fuels; however, maintaining high catalytic activity and stability at elevated temperatures remains a significant challenge. Here, a novel approach was employed to prepare carbon sphere (CS)-supported Fe catalysts, where isolated Fe particles are efficiently embedded within a carbon matrix to enhance both catalytic activity and stability. The resulting 3D scaffold structure catalyst featuring ultrafine FeOx nanoparticles (NPs) dispersed within nitrogen-doped carbon frameworks was synthesized from Fe-chitosan/CS composites using a chelate-assisted impregnation method paired with unidirectional freeze treatment. The coordination between chitosan chains and Fe(Ⅲ) has yielded a homogeneous Fe-chitosan composite, with the embedded FeOx NPs within the nitrogen-doped carbon (NC) matrix serving as pivotal barriers against sintering, thus enhancing stability. The synergistic effect of adding K promoter and the resulting 3D scaffold structure in Fe-K@NC/CS catalyst has further fine-tuned catalytic activity, ensuring high stability in HT-FTS. The current strategy of fabricating N-doped 3D scaffold structures of hybrid carbonaceous material achieved unprecedented results, with the CO conversion reached 62.7 % and C2-C4= olefin selectivity of 29.0 % at 340 °C, 20 bar and space velocity of 48000 mL gcat–1h−1., This work is financially supported by Shanxi Province Natural Science Foundation (202103021224073) and National Natural Science Foundation of China (22479106). The authors also acknowledge the financial support from the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref: PLEC2021-008086, sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe SMART-FTS (ref: PID2021–126876OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated CO2 capture and dynamic catalysis for CO2 recycling in a microbrewery

  • Merkouri, Loukia Pantzechroula
  • Bobadilla, Luis F.
  • Martín Espejo, Juan Luis
  • Odriozola, José Antonio
  • Penkova, Anna
  • Torres Sempere, Guillermo
  • Short, Michael
  • Ramírez-Reina, Tomás
  • Duyar, Melis S.
In this study, we used fermentation off-gases from a brewery for integrated CO2 capture and utilisation in order to produce CH4 with a dual-function material (DFM) containing NiRu as catalyst and dispersed CaO as adsorbent. CH4 was produced from captured CO2 via 2 pathways (fast and slow), proceeding through formyl intermediates according to the operando DRIFTS-MS results. The NiRuCa DFM showed a stable CH4 capacity over 8 cycles (105 μmol/gDFM) with fermentation off-gases being used as a CO2 capture feed. H2O and O2, which were present in small amounts in the emissions feed, resulted in the passivation of Ni in the form of a NiO layer and hence, the DFM did not undergo excessive oxidation and deactivation. This work constitutes a first in terms of validating the use of DFMs with real industrial emissions, and it directly correlates the DFM activity performance with its reaction mechanism and intermediate species., The University of Surrey team would like to acknowledge the help of Langham Brewery & Tap staff, and particularly James Berrow, Lesley Foulkes, and Saulo Parreira for allowing us to collect the fermentation off-gases. This research was funded by the University of Surrey’s SME Innovation Voucher Scheme, as well as the School of Chemistry and Chemical Engineering, and the Doctoral College of the University of Surrey. The TEM instrument was funded by EPSRC grant EP/V036327/1. L. P. Merkouri acknowledges the Erasmus+ programme, which allowed her to conduct part of the experiments in Seville, Spain. L.-P. Merkouri also thanks the technical support team of the University of Surrey (Ben Gibbons, Thomas Chamberlain, and Yusuf El-Hassan) for their assistance with her lab activities. SASOL is kindly acknowledged for providing the alumina-based support. The Spanish team is grateful to the Spanish Ministry of Science through the projects NICERBIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref: PID2021-126876OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Controlling copper location on exchanged MOR-type aluminosilicate zeolites for methanol carbonylation: In situ/operando IR spectroscopic studies

  • Luque Álvarez, Ligia A
  • Torres Sempere, Guillermo
  • Romero Sarria, Francisca
  • Bobadilla, Luis F.
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
Replacing homogeneous catalytic processes by heterogeneous routes based on the utilization of solid catalysts is of great interest from an environmental point of view. Owing to their genuine pore structure, zeolites such as mordenites (MOR) have emerged as game-changing materials to enable the heterogenization of catalytic processes including methanol carbonylation. Cu-exchange zeolites take the edge over pristine zeolites, leading to enhanced catalytic performance in terms of greater activity, selectivity, and stability. Herein, the overall catalytic activity and stability can be modulated upon controlling the environment and location of copper active sites in zeolites. In this study, Cu-exchanged mordenites were strategically synthesized to investigate the role of Cu location inside of MOR cavities under working conditions by means of in situ/operando infrared (IR) spectroscopic studies. The results obtained revealed that a major proportion of Cu in the MR-8 cavities notably enhances the activity and stability of the catalyst. This study provides crucial insights for fine-tuning zeolite catalysts to achieve the heterogenization of homogeneous carbonylation processes., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia e Innovación through the project SMART-FTS (PID2021-126876OB-I00) sponsored by MCIN/AEI/10.13039/501100011033 and European Union ERDF. Ligia A. Luque Álvarez thanks VI-PPITUS (University of Sevilla) for her current predoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Embracing the sustainable horizons through bioenergy innovations: a path to a sustainable energy future

  • Blay Roger, Rubén
  • Saif, Maria
  • Bobadilla, Luis F.
  • Ramírez-Reina, Tomás
  • Nawaz, Muhammad Asif
  • Odriozola, José Antonio
The urgent need for mitigating climate change necessitates a transformative shift in energy production and consumption paradigms. Amidst this challenge, bioenergy emerges as a pivotal contributor to the global energy transition, offering a diverse array of solid, liquid, and gaseous fuels derived from biomass. This mini review delves into the unique potential of bioenergy innovations, particularly renewable diesel, bio jet fuel, and ethanol, to reduce greenhouse gas emissions and transform various industries. The article highlights critical technological advancements, supportive policies, and cross-sector collaboration essential for a sustainable energy transition. Specific challenges such as ensuring a consistent biomass feedstock supply, decentralizing processing units, and navigating complex regulatory frameworks are examined. Innovative solutions like decentralized biomass processing and enhanced biomass logistics are discussed as pathways to overcome these barriers. The review provides specific recommendations for near-term policies and strategies to support decentralized facilities, showcasing bioenergy's role in achieving a sustainable future., The authors acknowledge financial support from Spanish Ministry of Science through the projects; Authors also pay thanks to “Macrovector/Freepik” for providing the services in designing the TOC and graphics. The authors acknowledge financial support from Spanish Ministry of Science through the projects; NICER-BIOFUELS (PLEC 2021-008086), financed by MCIN/AEI/10.13039/501100011033 Next-Generation Europe and SMART-FTS (PID 2021-126876OB-I00) FPI grant (PRE 2022-101636) financed by MICIN/AEI/10.13039/501100011033 & the FSE + Spanish Ministry and the European Union for the grant (JDC 2022-048533-I) financed by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Textile microfibers valorization by catalytic hydrothermal carbonization toward high-tech carbonaceous materials

  • Parrilla Lahoz, Silvia
  • Zambrano, Marielis C.
  • Pawlak, Joel J.
  • Venditti, Richard A.
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
  • Duyar, Melis S.
Author contributions S.P.-L.: writing the original draft, conceptualization, visualization, and investigation. M.C.Z.: investigation. J.J.P.: funding acquisition, supervision. R.A.V.: funding acquisition, supervision. J.A.O.: funding acquisition, conceptualization, supervision. T.R.R.: funding acquisition, conceptualization, project administration, writing e review and editing and supervision. M.S.D.: funding acquisition, supervision, conceptualization, visualization, project administration, and writing e review and editing., The authors assert that they do not have any conflicting interests. S.P.-L., M.S.D., T.R.R., J.J.P., and R.A.V. are identified as inventors on an international patent application (Patent number: PCT/GB2023/051538) associated with certain aspects of the research discussed in this publication. The patent application is owned by the University of Surrey and North Carolina State University. The authors state that the presence of this patent does not impact the analysis or communication of the study results in this work., Microplastics fibers shed from washing synthetic textiles are released directly into the waters and make up 35% of primary microplastics discharged to the aquatic environment. While filtration devices and regulations are in development, safe disposal methods remain absent. Herein, we investigate catalytic hydrothermal carbonization (HTC) as a means of integrating this waste (0.28 million tons of microfibers per year) into the circular economy by catalytic upcycling to carbon nanomaterials. Herein, we show that cotton and polyester can be converted to filamentous solid carbon nanostructures using a Fe-Ni catalyst during HTC. Results revealed the conversion of microfibers into amorphous and graphitic carbon structures, including carbon nanotubes from a cotton/polyethylene terephthalate (PET) mixture. HTC at 200°C and 22 bar pressure produced graphitic carbon in all samples, demonstrating that mixed microfiber wastes can be valorized to provide potentially valuable carbon structures by modifying reaction parameters and catalyst formulation., Financial support for this work was provided by the University Global Partnership Network (UGPN) Research Collaboration Fund (RCF), the School of Chemistry and Chemical Engineering at University of Surrey and the Department of Material Science at University of Seville. University of Seville acknowledges financial support from the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref: PID2021-126876OB-I00). The authors would like to acknowledge the help of the School of Chemistry and Chemical Engineering laboratory technicians Ben Gibbons, Thomas Chamberlain, and Yusuf El-Hassan for their continued support in the lab activities of S.P.-L. S.P.-L. also thanks Andreas Iakovidis of Mechanical Engineering Sciences, and Dr Rachida Bance-Soualhi of the department of Chemistry and Chemical Engineering for their assistance with SEM, and Raman, respectively. S.P.-L. acknowledges the University of Surrey Breaking Barriers Fellowship for funding her doctoral studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of electronic and structural properties on Au/In2O3/ZrO2 catalysts for CO2 hydrogenation to methanol

  • Augusto, Thiago de M
  • Roger, Rubén Blay
  • Petrolini, Davi D
  • Ferreira, Breno F
  • Santos, João Batista O
  • Ramirez, Carlos O
  • Clet, Guillaume
  • Ivanova, Svetlana
  • Odriozola, José Antonio
  • Bobadilla, Luis F.
  • Llorca, Jordi
  • Bueno, José Maria C
Hydrogenation of CO2 to methanol using H2 is a promising route for renewable energy production and CO2 utilization. Meanwhile, the development of catalysts that are both active and highly selective towards methanol production remains a significant challenge. This work investigates the methanol production performance of In2O3, In2O3/ZrO2, ZrO2, and the corresponding Au-promoted oxides. Techniques including XPS, ex situ and operando Raman spectroscopy, in situ and operando DRIFTS, and UV–Vis spectroscopy, together with HR-TEM, revealed that the interactions among Au, InOx, and zirconia species led to the creation of an interface for CO2 activation and hydrogenation to methanol, facilitated by oxygen vacancies generated in a reducing atmosphere. The high dispersion of Au and indium oxide species, as shown by HR-TEM, indicated that Au clusters and/or nanoparticles (NPs), together with In2O3, favored H2 dissociation and the prevention of sintering during the reaction. The 0.22Au/6.6In2O3/ZrO2sample achieved the maximum methanol yield, with superior activity and selectivity, compared to the unpromoted catalyst., This research received funding support from FAPESP (grant numbers 2016/02128-2, 2018/01258-5, 2019/12501-0, and 2023/18451-0) and CNPq (grant numbers 309373/2014-0, 203316/2020-7, 407878/2022-0, and 383428/2023-8). Additional support was provided by CAPES (Finance Code 001) and Fundación Carolina/Grupo de Tordesillas. The authors are grateful for the analytical support of LNNano (acknowledging Carlos Ospina Ramírez), LCE/UFSCar, and Iago William Zapelini for the in situ Raman analysis. J. Llorca is a Serra Húnter Fellow and acknowledges the ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2021 SGR 01061. J.A. Odriozola, R. Blay-Roger, and L.F. Bobadilla acknowledge financial support from the Spanish Ministry of Science through the projects NICER- BIOFUELS (ref. PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref. PID2021-126876OB-I00). The authors are also grateful to Priscilla Jussiane Zambiazi for developing the graphical and schematic., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2 Conversion via Low-Temperature RWGS Enabled by Multicomponent Catalysts: Could Transition Metals Outperform Pt?

  • Torres-Sempere, G.
  • González-Arias, J.
  • Penkova, A.
  • Santos-Muñoz, J. L.
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
  • Pastor-Pérez, L.
  • Ramírez-Reina, Tomás
In the context of CO2 valorisation, the reverse water–gas shift reaction (RWGS) is gathering momentum since it represents a direct route for CO2 reduction to CO. The endothermic nature of the reaction posses a challenge when it comes to process energy demand making necessary the design of effective low-temperature RWGS catalysts. Herein, multicomponent Cs-promoted Cu, Ni and Pt catalysts supported on TiO2 have been studied in the low-temperature RWGS. Cs resulted an efficient promoter affecting the redox properties of the different catalysts and favouring a strong metal-support interaction effect thus modulating the catalytic behaviour of the different systems. Positive impact of Cs is shown over the different catalysts and overall, it greatly benefits CO selectivity. For instance, Cs incorporation over Ni/TiO2 catalysts increased CO selectivity from 0 to almost 50%. Pt-based catalysts present the best activity/selectivity balance although CuCs/TiO2 catalyst present comparable catalytic activity to Pt-studied systems reaching commendable activity and CO selectivity levels, being an economically appealing alternative for this process., This work has been supported by the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR funds. Authors also acknowledge support from the grants PID2019-108502RJ-I00 and grant IJC2019-040560-I both funded by MCIN/AEI/ 10.13039/501100011033 as well as the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref: PID2021-126876OB-I00), sponsored by MCIN/AEI /10.13039/501100011033 and European Union ERDF. Funding for open access publishing: Universidad de Sevilla/CBUA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upcycling textile derived microplastics waste collected from washer and dryers to carbonaceous products using hydrothermal carbonization

  • Parrilla-Lahoz, Silvia
  • Jiménez-Páez, Elena
  • Masteghin, Mateus G.
  • Pawlak, Joel J
  • Venditti, Richard A
  • Bird, Robert
  • Servin, Paul
  • Odriozola, José Antonio
  • Ramírez-Reina, Tomás
  • Duyar, Melis S.
Microplastics are an emerging pollutant of concern. Many microplastics in the waters arise from washing synthetic textiles in residential and commercial washing machines. The present research evaluated the upcycling of this waste to carbon materials by hydrothermal carbonization. Real microfiber waste was collected using clothes washer and dryer microfilters. Via temperature and residence time screening (200 °C, 250 °C, 300 °C and 1 h, 4 h, 8 h) two temperatures of interest were determined (250 °C and 300 °C) for hydrothermal carbonization, for a residence time of 4 h. The results obtained in this research demonstrated that by varying the reaction conditions carbon production can be tailored, producing amorphous carbon or graphene/graphite. To this end, Raman spectroscopy results indicated the production of carbon nanomaterials; smaller particle sizes were detected after 250 °C-4h and 300 °C-4h treatments, (29.6 nm and 33.1 nm, respectively). Transforming microfibers into useful carbon nanoparticles via hydrothermal carbonization prolongs their lifecycle and mitigates environmental pollution. This process is an intriguing method of incorporating textile residue (microfibers) into the circular economy, where resources are perpetually recycled, and waste is avoided., Financial support for this work was provided by Xeros Technology Group plc, and the Department of Material Science at University of Seville. University of Seville acknowledges financial support from the Spanish Ministry of Science through the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref: PID2021-126876OB-I00). SPL acknowledges the Engineering and Physical Sciences Research Council grant EP/X000753/1 for TEM data acquisition. The authors would like to acknowledge the help of the School of Chemistry and Chemical Engineering laboratory technicians Ben Gibbons, Thomas Chamberlain, Matthew Crick and Yusuf El-Hassan for their continued support in the lab activities of SPL. SPL also thanks Andreas Iakovidis of Mechanical Engineering Sciences and Dr Rachida Bance-Soualhi of the Department of Chemistry for their assistance with SEM and Raman, respectively. SPL acknowledges the University of Surrey Breaking Barriers Fellowship for funding her doctoral studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of ambient pressure methanol production on Ni-Ga-Ca dual function materials and dynamic restructuring effects on selectivity

  • Paksoy, Aysun Ipek
  • Bobadilla, Luis F.
  • Blay-Roger, Rubén
  • Merkouri, Loukia Pantzechroula
  • López-Flores, Víctor
  • Coppex, Claude
  • Jelic, Jelena
  • Studt, Felix
  • Ramírez-Reina, Tomás
  • Odriozola, José Antonio
  • Duyar, Melis Seher
[Data availability] The data supporting the findings of this study are available within the main text and the Supplementary Information file. The Source Data can be accessed through the Mendeley Data repository: https://data.mendeley.com/datasets/vxdrzs4bk3/1, This study reports a dual function material (DFM) composed entirely of non-precious metals for methanol production (13.8 μmol/g material) at ambient pressure from passively captured CO<inf>2</inf> from the air. While state of the art carbon capture and utilisation (CCU) processes rely on expensive CO<inf>2</inf> capture systems and a high-pressure catalytic reactor for methanol synthesis, this Ni-Ga-Ca DFM can be an enabler for significant energy efficiency gains in methanol synthesis from CO<inf>2</inf> through the direct utilisation of dilute emissions and substantially lower operating pressures. Using operando DRIFT spectroscopy coupled with density functional theory, XAFS, XRD, and TEM-HAADF, a combination of Ni-Ga intermetallic species and their oxides are identified as the active sites. During cyclic operation a shift in selectivity towards methane is observed, which is associated with dynamic restructuring of the DFM. Guided by mechanistic and structural understanding, a synthesis strategy is developed to enhance cyclic stability by mitigating dealloying and Ni particle agglomeration. It is indicated that cyclic stability can be achieved by strengthening the Ni-Ga-Ca interaction, however, there remains a gradual shift in selectivity towards methane which highlights the need for further material optimisation., This work is supported by the Engineering and Physical Sciences Research Council (EPSRC) grant EP/X000753/1. The TEM instrument is funded by EPSRC grant EP/V036327/1. The authors would also like to acknowledge University of Surrey School of Chemistry and Chemical Engineering Technical Manager Ben Gibbons and Laboratory Technician Yusuf El-Hassan for their support. Diamond Light Source for the provision of beamtime (proposal SP29271-8), and the staff of beamlines B18 for XAFS measurements and data collection are greatly acknowledged. The authors would also like to thank Oliver Hodson and Martin Wilding at the Research Complex at Harwell for their significant contributions to the experimental setup for the XAFS measurements. The authors acknowledge the support by the state of Baden-Württemberg through bwHPC and the German Research Foundation (DFG) through grant no. INST 40/575-1 FUGG (JUSTUS 2 cluster, RVs bw17D011). C.C., J.J. and F.S. thank the Deutsche Forschungsgemeinschaft (DFG) for funding this work in the framework of the Priority Program SPP 2080 “Catalysts and reactors under dynamic conditions for energy storage and conversion” under the grant number STU 703/3-2 (FS). Financial support from the Helmholtz Association, Germany is also gratefully acknowledged. The Spanish team is grateful to the support provided by Spanish Ministry of Science through the project SMART-FTS (ref: PID2021-126876OB-I00)., Peer reviewed