Pasar al contenido principal

Advanced catalytic processes for improving biofuels production via thermochemical treatments

FJC2021-047672-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FGD-Gypsum Waste to Capture CO2 and to Recycle in Building Materials: Optimal Reaction Yield and Preliminary Mechanical Properties

  • Moreno-García, Virginia
  • González-Arias, Judith
  • Ruiz-Martinez, Jaime D.
  • Baena-Moreno, Francisco Manuel
  • Leiva, Carlos
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The use of waste to capture CO2 has been on the rise, to reduce costs and to improve the environmental footprint. Here, a flue gas desulfurization (FGD) gypsum waste is proposed, which allows us to obtain a CaCO3-based solid, which should be recycled. The CO2 capture stage has primarily been carried out via the direct carbonation method or at high temperature. However, a high energy penalty and/or long reaction times make it unattractive from an industrial perspective. To avoid this, herein an indirect method is proposed, based on first capturing the CO2 with NaOH and later using an aqueous carbonation stage. This allows us to capture CO2 at a near-ambient temperature, improving reaction times and avoiding the energy penalty. The parameters studied were Ca2+/CO32¿ ratio, L/S ratio and temperature. Each of them has been optimized, with 1.25, 100 mL/g and 25 °C being the optimal values, respectively, reaching an efficiency of 72.52%. Furthermore, the utilization of the produced CaCO3 as a building material has been analyzed. The density, superficial hardness and the compressive strength of a material composed of 10 wt% of CaCO3 and 90 wt% of commercial gypsum, with a water/solid ratio of 0.5, is measured. When the waste is added, the density and the mechanical properties decreased, although the compressive strength and superficial hardness are higher than the requirements for gypsum panels. Thus, this work is promising for the carbonation of FGD-gypsum, which involves its chemical transformation into calcium carbonate through reacting it with the CO2 of flue gasses and recycling the generated wastes in construction materials., This research was funded by the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 from the European Union NextGenerationEU/PRTR funds, and by the Ministerio de Ciencia e Innovación of the Spanish Government under grant number PID2019-110928RB-C33.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal carbonization vs. anaerobic digestion to valorize fruit and vegetable waste: A comparative technical and energy assessment

  • Metyouy, Khadija
  • González, Rubén
  • Gómez, Xiomar
  • González-Arias, Judith
  • Martínez, E. Judith
  • Chafik, Tarik
  • Sánchez, Marta E.
  • Cara-Jiménez, Jorge
Herein, the valorization of vegetable and fruit waste was assessed via hydrothermal carbonization (HTC) and anaerobic digestion (AD) in terms of product characterization and energy requirements. HTC was conducted at reaction temperatures between 150 ºC and 190 ºC, and residence times between 20 min and 40 min. The increase in the process severity resulted in hydrochars with higher carbon contents and higher energy densification ratios. AD was performed in two different ways. i.e., batch and semi-continuous reactions. From the batch experiments a methane yield of 300 L CH4/kg VS was obtained, while for the semi-continuous, the average specific methane production estimated (for HRTs from 75 to 50 days) was 213 ± 32 L CH4/kg VS. To estimate the energy requirements, mass and energy balances were performed considering the basic stages of each process to obtain a suitable biofuel material. In this sense, it was concluded that for this specific waste, AD was a more suitable process with a positive energy net balance. On the contrary, HTC presented a negative energy net balance being required 1.29 MJ/kg of fresh food waste. A combined HTC-AD treatment may be an efficient method to take advantage of both technologies leading to higher energy efficiencies and other valuable products., Khadija Metyouy would like to thank the University of León for her scholarship (within the framework of Erasmus). This work has been partially supported by the grant FJC2021-047672-I, co-financed by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR Funds. A big thank you to all the team of the Grupo Ingeniería Química, Ambiental y Bioprocesos (IQUIMAB) Universidad de León and especially for Marta E. Sánchez and Jorge Cara-Jiménez for sharing information and knowledge from their experiences., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2 Conversion via Low-Temperature RWGS Enabled by Multicomponent Catalysts: Could Transition Metals Outperform Pt?

  • Torres-Sempere, G.
  • González-Arias, J.
  • Penkova, A.
  • Santos-Muñoz, J. L.
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
  • Pastor-Pérez, L.
  • Ramírez-Reina, Tomás
In the context of CO2 valorisation, the reverse water–gas shift reaction (RWGS) is gathering momentum since it represents a direct route for CO2 reduction to CO. The endothermic nature of the reaction posses a challenge when it comes to process energy demand making necessary the design of effective low-temperature RWGS catalysts. Herein, multicomponent Cs-promoted Cu, Ni and Pt catalysts supported on TiO2 have been studied in the low-temperature RWGS. Cs resulted an efficient promoter affecting the redox properties of the different catalysts and favouring a strong metal-support interaction effect thus modulating the catalytic behaviour of the different systems. Positive impact of Cs is shown over the different catalysts and overall, it greatly benefits CO selectivity. For instance, Cs incorporation over Ni/TiO2 catalysts increased CO selectivity from 0 to almost 50%. Pt-based catalysts present the best activity/selectivity balance although CuCs/TiO2 catalyst present comparable catalytic activity to Pt-studied systems reaching commendable activity and CO selectivity levels, being an economically appealing alternative for this process., This work has been supported by the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR funds. Authors also acknowledge support from the grants PID2019-108502RJ-I00 and grant IJC2019-040560-I both funded by MCIN/AEI/ 10.13039/501100011033 as well as the projects NICER-BIOFUELS (ref: PLEC2021-008086), sponsored by MCIN/AEI/10.13039/501100011033 Next Generation Europe and SMART-FTS (ref: PID2021-126876OB-I00), sponsored by MCIN/AEI /10.13039/501100011033 and European Union ERDF. Funding for open access publishing: Universidad de Sevilla/CBUA., Peer reviewed