Pasar al contenido principal

DISEÑO DE REFUERZO MULTIESCALA PARA MUY ALTA RESISTENCIA A TRACCION Y FATIGA

PID2019-110928RB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FGD-Gypsum Waste to Capture CO2 and to Recycle in Building Materials: Optimal Reaction Yield and Preliminary Mechanical Properties

  • Moreno-García, Virginia
  • González-Arias, Judith
  • Ruiz-Martinez, Jaime D.
  • Baena-Moreno, Francisco Manuel
  • Leiva, Carlos
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The use of waste to capture CO2 has been on the rise, to reduce costs and to improve the environmental footprint. Here, a flue gas desulfurization (FGD) gypsum waste is proposed, which allows us to obtain a CaCO3-based solid, which should be recycled. The CO2 capture stage has primarily been carried out via the direct carbonation method or at high temperature. However, a high energy penalty and/or long reaction times make it unattractive from an industrial perspective. To avoid this, herein an indirect method is proposed, based on first capturing the CO2 with NaOH and later using an aqueous carbonation stage. This allows us to capture CO2 at a near-ambient temperature, improving reaction times and avoiding the energy penalty. The parameters studied were Ca2+/CO32¿ ratio, L/S ratio and temperature. Each of them has been optimized, with 1.25, 100 mL/g and 25 °C being the optimal values, respectively, reaching an efficiency of 72.52%. Furthermore, the utilization of the produced CaCO3 as a building material has been analyzed. The density, superficial hardness and the compressive strength of a material composed of 10 wt% of CaCO3 and 90 wt% of commercial gypsum, with a water/solid ratio of 0.5, is measured. When the waste is added, the density and the mechanical properties decreased, although the compressive strength and superficial hardness are higher than the requirements for gypsum panels. Thus, this work is promising for the carbonation of FGD-gypsum, which involves its chemical transformation into calcium carbonate through reacting it with the CO2 of flue gasses and recycling the generated wastes in construction materials., This research was funded by the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 from the European Union NextGenerationEU/PRTR funds, and by the Ministerio de Ciencia e Innovación of the Spanish Government under grant number PID2019-110928RB-C33.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of the Rheological Properties of Natural Hydraulic Lime-Based Suspensions for Sustainable Construction and Heritage Conservation

  • Rosa, Ángel de la
  • Ruiz, Gonzalo
  • Moreno, Rodrigo
Natural hydraulic lime (NHL)-based binders play a crucial role in preserving cultural heritage structures, ensuring integrity and longevity. Beyond traditional uses, these binders exhibit potential for integration into both non-structural and structural components, being compatible with innovative manufacturing processes such as digital fabrication. Meticulously designed grouts, with applicability in their fresh and hardened states, are essential for heritage stability. This study explores the relationships between mineral additions, chemical admixtures, and lime for grout formulations, aiming to advance our understanding and inform the optimization of materials for heritage restoration. Key questions include the influence of natural volcanic pozzolan (NVP) and metakaolin (MK) on rheology and the impact of varying ratios of superplasticizer on NHL-based grout’s rheological behavior. This systematic evaluation of rheological parameters aims to innovate mix designs, expanding NHL-based binders’ applicability in construction and science. Our hypotheses suggest that well-designed lime grout formulations, incorporating NVP and MK, can enhance rheological properties, addressing challenges in sustainable construction and heritage conservation. This research provides valuable insights for optimizing lime-based materials, fostering advancements in heritage restoration, and promoting wider NHL-based binder adoption in diverse construction applications., This research received funding from the Universidad de Castilla-La Mancha, Spain, and the Fondo Europeo de Desarrollo Regional through grant 2022–GRIN–34124, and from the Ministerio de Ciencia e Innovación, Spain, through grants PID2019–110928RB–C31 and PID2021–124521OB–I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Circular Economy Perspective: Recycling Wastes through the CO<inf>2</inf> Capture Process in Gypsum Products. Fire Resistance, Mechanical Properties, and Life Cycle Analysis

  • Ruiz-Martinez, Jaime D.
  • Moreno, Virginia
  • González-Arias, Judith
  • Peceño Capilla, Begoña
  • Baena-Moreno, Francisco M.
  • Leiva, Carlos
In recent years, the implementation of CO2 capture systems has increased. To reduce the costs and the footprint of the processes, different industrial wastes are successfully proposed for CO2 capture, such as gypsum from desulfurization units. This gypsum undergoes an aqueous carbonation process for CO2 capture, producing an added-value solid material that can be valorized. In this work, panels have been manufactured with a replacement of (5 and 20%) commercial gypsum and all the compositions kept the water/solid ratio constant (0.45). The density, surface hardness, resistance to compression, bending, and fire resistance of 2 cm thick panels have been determined. The addition of the waste after the CO2 capture diminishes the density and mechanical strength. However, it fulfills the requirements of the different European regulations and diminishes 56% of the thermal conductivity when 20%wt of waste is used. Although the CO2 waste is decomposed endothermically at 650 °C, the fire resistance decreases by 18% when 20%wt. is added, which allows us to establish that these wastes can be used in fire-resistant panels. An environmental life cycle assessment was conducted by analyzing a recycling case in Spain. The results indicate that the material with CO2 capture waste offers no environmental advantage over gypsum unless the production plant is located within 200 km of the waste source, with transportation being the key factor., This research was funded by the Spanish Ministry of Science and Innovation under grant number PID2019-110928RB-C33 and the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FGD-Gypsum Waste to Capture CO2 and to Recycle in Building Materials: Optimal Reaction Yield and Preliminary Mechanical Properties

  • Moreno, Virginia
  • González-Arias, Judith
  • Ruiz-Martínez, Jaime D
  • Balart-Gimeno, Rafael
  • Baena-Moreno, Francisco Manuel
  • Leiva, Carlos
The use of waste to capture CO2 has been on the rise, to reduce costs and to improve the environmental footprint. Here, a flue gas desulfurization (FGD) gypsum waste is proposed, which allows us to obtain a CaCO3-based solid, which should be recycled. The CO2 capture stage has primarily been carried out via the direct carbonation method or at high temperature. However, a high energy penalty and/or long reaction times make it unattractive from an industrial perspective. To avoid this, herein an indirect method is proposed, based on first capturing the CO2 with NaOH and later using an aqueous carbonation stage. This allows us to capture CO2 at a near-ambient temperature, improving reaction times and avoiding the energy penalty. The parameters studied were Ca2+/CO32- ratio, L/S ratio and temperature. Each of them has been optimized, with 1.25, 100 mL/g and 25 °C being the optimal values, respectively, reaching an efficiency of 72.52%. Furthermore, the utilization of the produced CaCO3 as a building material has been analyzed. The density, superficial hardness and the compressive strength of a material composed of 10 wt% of CaCO3 and 90 wt% of commercial gypsum, with a water/solid ratio of 0.5, is measured. When the waste is added, the density and the mechanical properties decreased, although the compressive strength and superficial hardness are higher than the requirements for gypsum panels. Thus, this work is promising for the carbonation of FGD-gypsum, which involves its chemical transformation into calcium carbonate through reacting it with the CO2 of flue gasses and recycling the generated wastes in construction materials., This research was funded by the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 from the European Union NextGenerationEU/PRTR funds, and by the “Ministerio de Ciencia e Innovación” of the Spanish Government under grant number PID2019-110928RB-C33., Peer reviewed