Pasar al contenido principal

OBTENCION DE NANOCOMPOSITES DE ORIGEN BIO A PARTIR DE RESIDUOS LIGNOCELULOSICOS PARA SU USO EN FILMS MULTICAPA

PID2020-116496RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 67
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of Biodegradability Under Composting Conditions and Physical Performance of Poly (Lactic Acid) Based Materials Modified with Phenolic-Free Rosin Resin

  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Ferri, J.M|||0000-0002-1269-4973
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Aldas, Miguel
  • Pawlak, Franciszek
[EN] Biodegradable materials based on poly (lactic acid) (PLA) and a phenolic free modified rosin resin were obtained and studied to control the biodegradability under composting conditions of the materials. The resin was blended in concentrations of 1, 3, 5, 10, and 15 parts per hundred (phr) of base polymer using industrial plastic processing techniques. Additionally, to study the effect of the resin on the compatibility of the PLA, the physical performance, water absorption, mechanical behavior, thermal stability, and microstructure of the materials were assessed. The resin incorporation decreased the resistance to thermal degradation of the resultant material, and the composting disintegration rate was slowed down with the increasing content of the resin. The water diffusion was delayed, and the diffusion and corrected diffusion coefficients decreased with the rising content of UP. The mechanical properties tend to decrease while a saturation effect was observed for contents higher than 3 phr of resin. The optimal amount of resin that can be added to achieve good interaction with PLA matrix, complete miscibility, and good material cohesion is 3 phr., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by MCIN/AEI/10.13039/501100011033 through PID-AEI Project (grant PID2021-123753NA-C33 and PID2020-116496RB-C22) and TED-AEI Project (grants TED2021-129920A-C43), and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of Epoxidized Isobutyl Fatty Esters from Soybean Oil Distillates as Biobased Plasticizers

  • Nájera, Laura N.
  • Orjuela, Alvaro
  • Narvaez-Rincón, Paulo Cesar
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] This study evaluated the production and performance of biobased epoxidized isobutyl esters (EIE) as sustainable plasticizers for polymers, aiming to support circular economy models within the chemical industry. EIE were synthesized through the esterification of isobutyl alcohol with oleic and linoleic acids as well as soybean oil deodorizer distillates (SODD), followed by subsequent epoxidation. The plasticizing effect of epoxidized isobutyl oleate, linoleate, and soyate was assessed by studying their mechanical and thermal properties and performing Dynamic Mechanical Analysis (DMA) on PVC films prepared at a fixed content of 70 phr using the solvent casting method. The chemical structure of the films was identified by Fourier transform infrared (FTIR) spectroscopy while the permanence of the plasticizers was investigated through migration and volatility tests. Finally, barrier properties such as water vapor permeability and migration were evaluated alongside surface characteristics such as contact angle and transparency by UV-visible spectroscopy. Dioctyl phthalate (DOP) and epoxidized soybean oil (ESO) were used as reference commercial plasticizers. Among the different EIE, epoxidized isobutyl soyate (EIS) showed remarkable results such as high elasticity (500%), high thermal stability, tensile strength (11.2 MPa) comparable to the reference plasticizers, and high plasticizing efficiency (106.2%). However, barrier properties, such as water vapor permeability and migration, were affected by the composition of this epoxidized ester. Overall, EIE exhibited moderate migration rates which limit their use as general purpose PVC plasticizers, but they might be effectively used for low temperature applications and as coplasticizers for different polymers., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025, CIGE/2021/094, and CIGE/2023/46. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). This project was also partially funded by grants from the Newton Fund Institutional Links - Project 526061819 according to Minciencias contract 584-2020, by Program ECOSNORD in accordance with Minciencias contract 487-2021, and by Universidad Nacional de Colombia projects HERMES 61109, 53361, and 46517.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of TiO2 and TiO2-Ag Nanoparticles in Recycled High-Density Polyethylene: Effect of the Type of Photocatalyst and Incorporation Method on Photocatalytic Activity for the Decomposition of NO

  • Gavilanes, Dayana
  • Cataño, Francisco A.
  • Saavedra, Marcela
  • Carbonnel, Alexandre
  • Murillo, Herman A.
  • Loyo, Carlos
  • Zapata, Paula A.
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work reported two types of photocatalysts in polymeric sheets derived from recycled high-density polyethylene (HDPEr): anatase TiO2 and Ag-decorated anatase TiO2 (TiO2-Ag). The Ag nanoparticles were deposited on the TiO2 nanoparticles via chemical reduction using formaldehyde as the reducing agent, although XPS analysis indicated that anatase was also reduced during Ag deposition. The sheets were prepared using two methods: extrusion and a plasma immersion process. In the first one, nanoparticles were introduced during extrusion, resulting in photocatalyst/HDPEr composites. On the other hand, the plasma method involved depositing photocatalyst nanoparticles into the polymer sheet surface through a two-step process of air plasma treatment followed by immersion in an aqueous photocatalyst suspension. The composites obtained through extrusion exhibited a higher Young's modulus compared to neat HDPEr, attributed to the reinforcing effect of the nanoparticles, which was more significant with the incorporation of TiO2 nanoparticles. Photocatalytic activity assessment revealed that sheets obtained by extrusion showed poor performance, whereas photocatalyst deposition on sheets significantly enhanced NOx photodegradation. Notably, TiO2-Ag nanoparticles exhibited superior photocatalytic activity, with the polymeric sheet containing TiO2-Ag nanoparticles on the surface achieving the highest activity (similar to 23.67% NOx photodegradation). The detailed methodology and robust experimental data provided offer valuable insights into optimizing nanoparticle incorporation techniques to enhance the functional properties of recycled polymeric materials for environmental applications. Overall, although the plasma treatment did not affect the mechanical properties of the sheets significantly, it allows an outstanding advance in NOX abatement. Especially for the TiO2-Ag-modified sheets. Based on this background, this research addresses a double environmental approach by developing self-cleaning building panels from HDPEr., F. A. Cataño and P. A. Zapata thank Proyecto "Obtencion de compositos biodegradables utilizando un modelo de economia circular", DICYT codigo 022341ZR_AYUDANTE, Vicerrectoria de Investigacion, Desarrollo e Innovacion de la Universidad de Santiago de Chile. P.A. Zapata acknowledges the financial support under FONDECYT Regular Project 1220093. D. Gavilanes thank ANID BECAS/DOCTORADO NACIONAL 21210580, Agencia Nacional de Investigacion y Desarrollo. Gobierno de Chile. This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. L. Quiles-Carrillo wants to thank "Vicerrectorado de Investigacion" at Universitat Politecnica de Valencia (UPV) for partial funding of this research through the program "Funds for First Research Projects" (PAID-06-22). A. Carbonnel thanks ANID-Subdireccion de Investigacion Aplicada. Fondef IDeA I+D. Folio: ID20I10291.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo y optimización de formulaciones de poliamida de origen renovable con comportamiento ignífugo

  • Marset Gimeno, David
[ES] El principal objetivo de la presente tesis doctoral se ha centrado en la obtención, desarrollo y optimización de formulaciones de poliamida de origen renovable con aditivos que mejoren las propiedades mecánicas, morfológicas, térmicas, termomecánicas y de comportamiento frente al fuego. En una primera fase se ha trabajado con mezclas de poliamida con un origen parcial biológico obtenido de la reacción del ácido dicarboxílico del aceite de ricino con la 1,6-hexametilendiamina (HMDA) derivada del petróleo mediante policondensación. De esta manera se obtiene una BioPA 610 con un contenido bio entre el 60-63% en peso. Esta PA610 se combinó con nanotubos de Halloysita (HNTs) en diferentes cargas para evaluar su efecto en la matriz y sus propiedades. Se obtuvo un gran aumento de rigidez con la incorporación de carga en la matriz polimérica además de un ligero aumento de la dureza. Las propiedades morfológicas muestran una buena dispersión de los nanotubos en el material. En cuanto a las propiedades térmicas los HTNs no suponen una gran variación de las características con respecto al polímero base. Los resultados termomecánicos muestran un gran aumento en el módulo de almacenamiento. Por otro lado, se estudiaron las propiedades de comportamiento frente al fuego de las mezclas de PA610 y HNTs mediante las técnicas del cono calorimétrico, índice límite de oxígeno (LOI), opacidad y toxicidad de los gases producidos, poder calorífico de combustión y ensayo UL-94. De los resultados obtenidos se aprecia una buena reducción del calor liberado con el aumento de carga de HNTs, una ligera disminución en el valor del LOI. En cuanto a la opacidad del humo desprendido, la presencia de HNTs no afecta demasiado en la liberación del humo, pero sí se obtiene una buena reducción del CO2 desprendido durante la combustión del material. El poder calorífico muestra una disminución de hasta 10 MJ/Kg con respecto a la PA610 sin aditivo. Por último, el ensayo de UL-94 no supone variación de resultados en las diferentes muestras analizadas. En una última fase se trabajó con grafito expandido (EGr) combinado dentro de la matriz polimérica de poliamida 1010 de origen biológico obtenida 100% de fuentes renovables. En esta fase se incorporaron cargas de EGr entre 2,5% y 10% en peso. Se estudiaron propiedades mecánicas, térmicas y termomecánicas, así como el análisis del color, morfología, hidrofobia, captación de agua y su comportamiento frente al fuego. Mecánicamente se apreció una gran mejora en la rigidez del material. En las propiedades térmicas se mejoró el grado de cristalinidad del material. El análisis termomecánico mostró un aumento en el módulo (E) y en el módulo de almacenamiento (E'). El estudio de la hidrofobia y la captación de agua dio como resultado una reducción en la absorción de agua y un aumento de la hidrofobicidad del material. Por último, en cuanto a las propiedades del material frente al fuego, se consiguió reducir en gran medida la liberación de calor emitido. El valor del índice límite de oxígeno se reduce ligeramente y el ensayo de la UL-94 muestra una mejora de V-2 a V-1 en la clasificación del compuesto con la incorporación de EGr frente al polímero sin aditivar., [CA] El principal objectiu de la present tesi doctoral s'ha centrat en l'obtenció, el desenvolupament i l'optimització de formulacions de poliamida d'origen renovable amb additius que millorin les propietats mecàniques, morfològiques, tèrmiques, termomecàniques i de comportament davant del foc. En una primera fase s'ha treballat amb barreges de poliamida amb un origen parcial biològic obtingut de la reacció de l'àcid dicarboxílic de l'oli de ricí amb la 1,6-hexametilendiamina (HMDA) derivada del petroli mitjançant policondensació. D¿aquesta manera s'obté una BioPA 610 amb un contingut bio entre el 60-63% en pes. Aquesta PA610 es va combinar amb nanotubs de Halloysita (HNTs) en diferents càrregues per avaluar el seu efecte a la matriu i les seues propietats. Es va obtenir un gran augment de rigidesa amb la incorporació de càrrega a la matriu polimèrica a més d'un lleuger augment de la duresa. Les propietats morfològiques mostren una bona dispersió dels nanotubs al material. Quant a les propietats tèrmiques, els HTNs no suposen una gran variació de les característiques respecte al polímer base. Els resultats termomecànics mostren un gran augment en el mòdul d'emmagatzematge. D'altra banda, es van estudiar les propietats de comportament davant del foc de les barreges de PA610 i HNTs mitjançant les tècniques del con calorimètric, índex límit d'oxigen (LOI), opacitat i toxicitat dels gasos produïts, poder calorífic de combustió i assaig UL-94. Dels resultats obtinguts s'aprecia una bona reducció de la calor alliberada amb l'augment de càrrega de HNTs, una lleugera disminució al valor del LOI. Quant a l'opacitat del fum desprès, la presència de HNTs no afecta gaire en l'alliberament del fum, però sí que s'obté una bona reducció del CO2 desprès durant la combustió del material. El poder calorífic mostra una disminució de fins a 10 MJ/Kg respecte de la PA610 sense additiu. Finalment, l'assaig d'UL-94 no suposa variació de resultats a les diferents mostres analitzades. En una darrera fase es va treballar amb grafit expandit (EGr) combinat dins de la matriu polimèrica de poliamida 1010 d'origen biològic obtinguda 100% de fonts renovables. En aquesta fase es van incorporar càrregues d'EGr entre el 2,5% i el 10% en pes. Es van estudiar propietats mecàniques, tèrmiques i termomecàniques, així com l'anàlisi del color, la morfologia, la hidrofòbia, la captació d'aigua i el seu comportament davant del foc. Mecànicament es va apreciar una gran millora en la rigidesa del material. A les propietats tèrmiques es va millorar el grau de cristal·linitat del material. L'anàlisi termomecànica va mostrar un augment al mòdul (E) i al mòdul d'emmagatzematge (E'). L'estudi de la hidrofòbia i la captació d'aigua va donar com a resultat una reducció de l'absorció d'aigua i un augment de la hidrofobicitat del material. Finalment, quant a les propietats del material davant del foc, es va aconseguir reduir en gran mesura l'alliberament de calor emesa. El valor de l'índex límit d'oxigen es redueix lleugerament i l'assaig de la UL-94 mostra una millora de V-2 a V-1 a la classificació del compost amb la incorporació d'EGr davant del polímer sense additivar., [EN] The main objective of this doctoral thesis has focused on obtaining, developing and optimizing polyamide formulations of renewable origin with additives that improve the mechanical, morphological, thermal, thermomechanical and fire behavior properties. In a first phase, has been carried out an experimental with polyamide mixtures with a partial biological origin obtained from the reaction of the dicarboxylic acid of castor oil with 1,6-hexamethylenediamine (HMDA) derived from petroleum by means of polycondensation. In this way, a BioPA 610 with a bio content between 60-63% by weight is obtained. This PA610 was combined with Halloysite nanotubes (HNTs) at different loadings to evaluate its effect on the matrix and its properties. A large increase in stiffness was obtained with the incorporation of filler in the polymeric matrix in addition to a slight increase in hardness. The morphological properties show a good dispersion of the nanotubes in the material. Regarding the thermal properties, the HTNs do not imply a great variation of the characteristics with respect to the base polymer. The thermomechanical results show a large increase in the storage modulus. On the other hand, the fire behavior properties of the mixtures of PA610 and HNTs were studied using the calorimetric cone techniques, limit oxygen index (LOI), opacity and toxicity of the gases produced, calorific value of combustion and UL-94 test. From the results obtained, a good reduction of the heat released with the increase in the load of HNTs, a slight decrease in the value of the LOI, can be seen. Regarding the opacity of the smoke released, the presence of HNTs does not affect the release of smoke too much, but a good reduction of the CO2 released during the combustion of the material is obtained. The calorific power shows a decrease of up to 10 MJ/Kg with respect to PA610 without additive. Lastly, the UL-94 test does not assume any variation in results in the different samples analysed. In a final phase, expanded graphite (EGr) combined within the polyamide 1010 polymeric matrix of biological origin obtained 100% from renewable sources was worked on. In this phase, EGr loads between 2.5% and 10% by weight were incorporated. Mechanical, thermal and thermomechanical properties were studied, as well as the analysis of color, morphology, hydrophobicity, water uptake and its behavior against fire. Mechanically, a great improvement in the rigidity of the material was appreciated. In the thermal properties, the degree of crystallinity of the material was improved. The thermomechanical analysis showed an increase in the modulus (E) and in the storage modulus (E'). The study of hydrophobicity and water uptake resulted in a reduction in water absorption and an increase in the hydrophobicity of the material. Finally, regarding the properties of the material against fire, it was possible to greatly reduce the release of emitted heat. The value of the oxygen limit index is slightly reduced and the UL-94 test shows an improvement from V-2 to V-1 in the classification of the compound with the incorporation of EGr compared to the polymer without additives., This research was funded by the Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015- 63855-C2-1-R. Project funded with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and grant number AICO/2021/025 funded by Generalitat Valenciana. AITEX wants to thank CDTI (Centro para el Desarrollo Tecnológico Industrial) within the framework of grants for Technological Centres of Excellence “Cervera” (CER- 20211013). The author would like to thank the INTERREG SUDOE NABITEX project (SOE2/P1/P0524) for allowing him to participate in it as part of his training.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative characterization of gum rosins for their use as sustainable additives in polymeric matrices

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldás-Carrasco, Miguel Fernando
  • Hernandez Fernandez, Joaquin Alejandro
[EN] There is a growing interest in the use of non-polluting compounds, which come from renewable sources, and which performance in their scope is equivalent to their synthetic similes. In this work, five types of rosins from different sources were studied, verifying the existence of differences that can be inferred in their subsequent use and application as material additives. For the study, rosins were analyzed using gas-mass chromatographic techniques, infrared spectrophotometry (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and color characterization. The results showed that the samples are composed of either abietic acid or by its structural isomers in contents higher than 80%. FTIR shows that the main difference in the gum rosins is related to the proclivity to absorb environmental moisture and that this technique is not enough to differentiate them. Moreover, the DSC reveals that the gum rosins present enthalpy relaxation effects due to their manufacturing process. The TGA showed that gum rosins are thermally stable until 200 degrees C, therefore they can be successfully blended with thermoplastic polymers. Finally, the color characterization shows little differences between the samples, being CA the gum rosin with the greatest total color differences., CRUE-Universitat Politecnica de Valencia; Spanish Ministry of Science and Innovation, Grant/Award Number: PID2020-116496RB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient single-step reactive compatibilization of hemp flour-reinforced PLA/TPS blends: Exploring eco-friendly alternatives and bio-based compatibilizers from maleinized hemp oil

  • Lerma-Canto, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] In a blend of poly(lactic acid) (PLA) and thermoplastic starch (TPS), a 15% load of hemp seed lignocellulosic filler (HF) was incorporated. Additionally, separate petrochemical-based compatibilizers, such as dicumyl peroxide (DCM) and benzoyl peroxide (LRL), as well as a bio-based compatibilizer, maleinized hemp seed oil (MHO), were introduced. Adding HF to the PLA/TPS blend reduced tensile mechanical properties due to the stress concentration phenomenon arising from the lack of interaction between components, yielding a more brittle material. This issue was mitigated by adding compatibilizers, notably the incorporation of MHO into the PLA/TPS/HF blend this increased elongation at break by enhancing compatibility among the blend components and providing a plasticizing effect. Moreover, regarding thermal properties, it was observed that the inclusion of HF led to a decrease in the glass transition temperature (Tg), cold crystallization temperature (Tcc), and melting temperature (Tm). Conversely, adding MHO to this blend increased all these values compared to the PLA/TPS/HF mixture, attributed to the plasticizing effect imparted by the modified oil. Additionally, following fracture in Charpy impact testing, the samples were subjected to field emission scanning electron microscopy (FESEM) analysis to examine the fractured surface of the various samples., This research work was funded by the Ministry of Science and Innovation through Retos de la Sociedad , project reference PID2020-119142RA-I00 and is part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/ 501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/ 094. Funded with Aid for First Research Projects (PAID-06- 22), Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pentaerythritol and Glycerol Esters Derived from Gum Rosin as Bio-Based Additives for the Improvement of Processability and Thermal Stability of Polylactic Acid

  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Ferri, J.M|||0000-0002-1269-4973
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Dominici, Franco
  • Luzi, Francesca
  • Puglia, Debora
  • Torre, Luigi
[EN] Gum rosin esters are some of the most common gum rosin derivatives used in different applications, such as coatings, paper, varnishes, chewing gum, and food industries. In this study, gum rosin esters are used as additives for polylactic acid (PLA) to improve its processability and thermal stability. Blends of an amorphous PLA with two different gum rosin esters, pentaerythritol ester and glycerol ester, were prepared by melt extrusion process in concentrations from 1, 3, and 5 phr. Besides the comparison of thermal degradation, microstructure assessment, and melt flow index (MFI) analysis, the processability performance during testing samples production by injection molding process was evaluated. Experimental results showed that MFI values of PLA-gum rosin ester blends increased by 100%, 147%, and 164%, along with increasing content of gum rosin esters addition, in both cases. Also, both derivatives slightly improved PLA thermal stability (around 3ºC higher). Injection molding temperature decreased by at least 20 °C for PLA-gum rosin ester blends compared with neat PLA. Furthermore, the maximum tensile strength of PLA-gum rosin esters was negligibly affected in formulations with low content of gum rosin esters, and the FESEM images revealed a good dispersion and compatibility of gum rosin ester particles into PLA matrix in both concentrations., This research was funded by MCIN/AEI/10.13039/501100011033 through PID-AEI Project (grant PID2021-123753NA-C33 and PID2020-116496RB-C22) and TED-AEI Project (grants TED2021-129920 A-C43), and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGenerationEU/PRTR".Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of the barrier and mechanical properties of environmentally friendly mango kernel flour/glycerol films by varying the particle size of mango kernel flour

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] The development of environmentally friendly films based on glycerol and different sizes of mango kernel flour particles (MKF), ranging from 100 to 600 µm, is reported. The casting solution method was used to produce the films, using distilled water as the solvent. The mechanical, morphological, barrier, surface, optical, wettability and biodegradability properties of the films were assessed. The mechanical analysis revealed that smaller particles lead to superior mechanical performance in terms of tensile strength, elastic modulus and elongation at break, achieving an elongation at break of 18.1 % for the films with the smallest particle size (100 µm). These results were confirmed by field emission scanning electron microscopy (FESEM) images of the films, where the gap between the mango kernel particles and the glycerol matrix is practically non-existent in films with the smallest particle size (100 µm). On the other hand, it was observed that as the particle size decreased, the barrier properties improved, showing a decrease in water vapor permeability rate (WVPR). With respect to antioxidant properties, it was observed that the films showed strong antioxidant activity, as assessed by 2,2¿diphenyl¿1¿picrylhydrazyl (DPPH) inhibition above 90 % for all films after 1 week. Finally, MKF films proved to be completely biodegradable, with a 100 % of disintegration after 4 weeks of incubation time in compost soil, with the smallest MKF particle size films exhibiting the highest disintegration rate., This research is a part of the Grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA, Grant no. AICO/2021/025 and CIGE/2021/094 for supporting this work. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and Grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 Grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of dibutyl itaconate on plasticization efficiency of a REX processed polylactide with peroxides

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports the effect of a reactive extrusion (REX) process on polylactide (PLA) based formulations plasticized with dibutyl itaconate (DBI). As DBI contains a carbon-carbon double bond, it is suitable for reactive extrusion. REX was carried out in a co-rotating twin extruder with the addition of two different organic peroxides. The main aim of using REX during the blending of the DBI plasticizer with PLA is to improve the interaction between them so the obtained final properties of the formulations could be improved. Plasticization process allowed to improve the ductile properties of PLA, by using REX, an improvement on the tensile strength was obtained with a no remarkable change in ductility. The thermal characterization also revealed that the glass transition temperature Tg was reduced for all formulations including DBI. REX with DBI provided a slight increase in Tg and this effect was also evident in thermomechanical properties. Regarding the thermal degradation behaviour, the plasticizer reduced the onset degradation and the maximum degradation rate, while a slight improvement on thermal stability was observed by using REX with organic peroxides. Finally, plasticizer migration in water was observed in conventional extruded PLA/DBI formulations, while REX provided improved behaviour against migration., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22) , Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) . J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Also, Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green Composites from Partially Bio-Based Poly(butylene succinate-co-adipate)-PBSA and Short Hemp Fibers with Itaconic Acid-Derived Compatibilizers and Plasticizers

  • Dolza, Celia
  • Gonga, Eloi
  • Fages, Eduardo
  • Tejada-Oliveros, Ramón
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this work, green composites have been developed and characterized using a bio-based poly-meric matrix such as BioPBSA and the introduction of a 30 wt.% short hemp fibers as a natural reinforcement to obtain materials with maximum environmental efficiency. In order to increase the interfacial adhesion between the matrix and the fiber to obtain better properties in the com-posites, a reactive extrusion process have been carried out. On the one hand, different additives derived from bio-based itaconic acid have been added to the BioPBSA/HEMP composite, such as Dibutyl itaconate (DBI) and a copolymer of PBSA grafted with itaconic acid (PBSA-g-IA). On the other hand, a different copolymer of PBSA grafted with maleic anhydride (PBSA-g-MA) was also tested. The resulting composites have been processed by injection-molding to obtain different samples which were evaluated in terms of mechanical, thermal, chemical, dynamic-mechanical, morphological and wettability and color properties. In relation to the mechanical properties, the incorporation of hemp fibers has resulted in an increase in the stiffness of the base polymer. The tensile modulus of pure BioPBSA has increased from 281 MPa to 3482 MPa with 30% fiber. The addition of DBI shows a remarkable improvement in the ductility of the composites, while co-polymers with IA and MA, generate mechanically balanced composites. In terms of thermal properties, the incorporation of hemp fibre and compatibilising agents leads to a reduction in thermal stability. However, from the point of view of thermomechanical properties, a clear in-crease in rigidity is achieved throughout the temperature range studied. As far as the colour of the samples is concerned, the incorporation of hemp generates a typical colour, while the incorpora-tion of the compatibilising agents does not modify this colour excessively. Finally, the introduc-tion of lignocellulosic fibers greatly affects water absorption and contact angle, although the use of additives helped to mitigate this effect., Project with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033, and grant number AICO/2021/025 funded by Generalitat Valenciana. AITEX wants to thank CDTI (Centro para el Desarrollo Tecnológico Industrial) within the framework of grants for Technological Centres of Excellence Cervera (CER-20211013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Peach Gum Polysaccharide as an Additive for Thermoplastic Starch to Produce Water-Soluble Films

  • Miguel-Guillem, Juan Vicente
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Juan-Polo, Andrea
[EN] Thermoplastic starch (TPS) has gained considerable attention during the last few years in developing starch-based biodegradable food packaging materials or edible coatings due to its high availability and low cost. TPS is manufactured from starch plasticized with food-grade plasticizers, making it suitable for food contact applications. In addition, TPS is bio-based and biodegradable, which, from an environmental perspective, closes the circle of the circular economy. However, the industrial application of TPS is somewhat limited due to its poor mechanical performance and low water resistance. However, the low water resistance could increase the water sensitivity of TPS, which could be advantageous for coating application or food encapsulation. The present work aims to tailor the water sensitivity of TPS by adding peach gum polysaccharide to obtain water-soluble films. With this aim, peach gum polysaccharide (PGP) was extracted from peach gum (PG) using the thermal hydrolysis method. Films of TPS-PG and TPS-PGP were prepared and characterized by their water sensitivity and mechanical, microstructural, and thermal properties. The results show that PGP allows the obtaining of films with water sensitivities higher than 70% but also improves TPS elongation at break, making the material more suitable for application as film., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 by the European Union "NextGenerationEU"/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Odour characterisation of high-density polyethylene recycled with sepiolite by sensory evaluation

  • Samper, María-Dolores|||0000-0002-5102-8412
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rodríguez-Rego, Jesus M.
  • Mendoza-Cerezo, Laura
  • Marcos-Romero, Alfonso C.
[EN] In recent years, the production and consumption of plastics has increased. This growth in production has resulted in an increasing amount of plastic waste, which is a global problem. Among plastics, high density polyethylene (HDPE) is one of the most widely used polymers in the packaging industry, so its waste is used in the recycling process. One of the main disadvantages of accepting recycled HDPE in production processes is its odour, which makes it impossible to use in production lines. The aim of this work is to reduce and/or eliminate the odours present in the HDPE samples selected for recycling through the use of sepiolites. FTIR analysis of the HDPE samples sent for recycling showed the presence of small amounts of polypropylene (PP), (PET), flexible polyurethane, dirt and adhesives, which could be the cause of the bad odour. Washing the sample showed a decrease in odour, probably due to the removal of dirt and other products that can lead to the degradation of the plastics responsible for the odour. The characterisation of the mixture of sepiolites and HDPE aims to analyse the mechanical and thermal stability of the sample. Not only can pre-washing lead to odour reduction, but also extrusion and injection processes at elevated temperatures can lead to the removal of volatile or semi-volatile compounds. Sensory analysis showed a reduction in odour in HDPE samples with sepiolites, particularly with 15% Pensil sepiolite, to the detriment of mechanical stability. At lower concentrations of sepiolite, the results are good from a sensory, mechanical and thermal point of view, which could mean an industrial application in the manufacture of benches, flower pots, etc., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the ERDF A way of making Europe and State Investigation Agency (PID2021-123753NA-C33 and PID2020-116496RB-C22) and European Union Next Generation EU/PRTR and MCIN/AEI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of thermoplastic matrix composite materials of renewable origin with pine fiber reinforcement, Optimización de materiales compuestos de matriz termoplástica de origen renovable con refuerzo de fibras de pino

  • Morcillo-Esquerdo, María del Carmen
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
[EN] In recent years, there has been a significant increase in social awareness of environmental problems related to high waste generation, oil scarcity and the growing need to reduce the carbon footprint. In this context, polymers from renewable sources can successfully reduce the use of fossil resources. This research work presents the study of polymer matrix composites from high density polyethylene of renewable origin (bioHPDE) and fibers extracted from the strobili of the common pine (Pinus halepensis) typical of the Mediterranean area, characterized by its high percentage of cellulose, and for being very abundant in the natural and economic environment. The research has focused on the influence of a compatibilizing agent based on polyethylene grafted with maleic anhydride on the final performance of the composite material. The resulting composites have been processed by extrusion and subsequent injection molding and a characterization focused on mechanical and thermal properties has been carried out. The results have demonstrated the optimization of the performance of the composite by using the compatibilizer, offering a significant improvement of the fiber-matrix interaction and thus validating its use in this type of composites. The result is a wood plastic composite (WPC) with a wide range of properties depending on the filler content used, providing a highly versatile material with applications in various industrial sectors., Este trabajo forma parte del proyecto PID2020-116496RB-C22 financiado por MCIN/AEI/10.13039/501100011033, y el proyecto AICO/2021/025 financiado por Generalitat Valenciana-GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and validation of a prototype for the on-line simultaneous analysis of quality caprolactam synthesized on an industrial scale

  • Hernández Fernández, Joaquín
  • Rincón, David
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Caprolactam is a highly useful monomer obtained through the Beckmann arrangement, which generates large profits worldwide and is widely used in different industries. During the synthesis process, various components can be generated that weaken the quality of the final product, to have control of the monomer, monitoring is carried out during the synthesis and characterization of the final product. These characterizations generally take time due to the different techniques that must be performed to obtain the data. In this work, a method is designed that associates different techniques to reduce the number of steps carried out in the tests to determine the qual-ity of the material, optimize the times and generate a quality and efficient process in a shorter time, in addition, it is due to a semi-automated system for the simultaneous characterization of caprolactam, which, according to the statistical data obtained for sodium, iron, volatile bases, and moisture analysis were reproducible. The developed prototype had 21 on-line valves that allowed taking the representative volumes of samples and reagents necessary for each measure-ment. There is excellent linearity where the correlation coefficient has values between 0,9992 and 1. The values obtained for the relative error are between 0.18 and 2.24% for laboratory tests using the traditional method and between 0.21 and 3.83% for tests carried out using the proto-type. The P value of the evaluation of the means was 0.997, indicating that the means are not statistically different.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of New Environmentally Friendly Polylactide Formulations with Terpenoid-Based Plasticizers with Improved Ductility

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Tejada-Oliveros, Ramón
[EN] This work addresses the potential of two biobased terpenoids, linalyl acetate and geranyl acetate, as environmentally friendly monomeric plasticizers for polylactide (PLA). Plasticized formulations of PLA containing 10 wt.% and 20 wt.% terpenoids were melt-compounded in a twin-screw co-rotating extruder and, subsequently, processed by injection moulding for further characterization. In addition, a reactive extrusion process (REX) was carried out on plasticized formulations containing 20 wt.% terpenoids with dicumyl peroxide to anchor the plasticizer molecules into the PLA backbone. Both terpenoids led to a remarkable plasticization effect on PLA, with a noticeable increase in ductile properties. In particular, the elongation at break of PLA, around 4.7%, was improved to values above 230% for all the plasticized formulations, even for low terpenoid concentration of 10 wt.%. Terpenoids also provide increased crystallinity because polymers chains have more mobility and are more readily arranged. This was observed by shifting the cold crystallization process to lower temperatures. As with other monomeric plasticizers, a clear decrease in the glass transition temperature from 61.5 & DEG;C (neat PLA), to values of around 40 & DEG;C for the plasticized formulations with 20 wt.% terpenoid was obtained. The obtained formulations show high potential since the plasticization efficiency of these terpenoids is very high, thus leading to new toughened-PLA formulations with improved ductility., J. Gomez-Caturla wants to thank grant FPU20/01732 funded by MCIN/AEI/ and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/ and by ESF Investing in your future. R. Tejada-Oliveros wants to thank Universitat Politecnica de Valencia for the grant received through the PAID-01-20 program. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of Steam Heat and Dry Heat Sterilization Processes on 3D Printed Commercial Polymers Printed by Fused Deposition Modeling

  • Fuentes, Jorge Mauricio
  • Arrieta, Marina Patricia
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
[EN] Fused deposition modeling (FDM), the most widely used additive manufacturing (AM) technology, is gaining considerable interest in the surgical sector for the production of single-use surgical devices that can be tailor-made according to specific requirements (e.g., type of patient surgery, specific shapes, etc.) due to its low cost, ease of access to materials (3D-printing filament), and the relatively low complexity. However, surgical 3D-printing parts should resist sterilization treatments without losing structural, mechanical, and dimensional accuracy. Thus, in this work, 3D-filaments based on poly(lactic acid) (PLA), poly(ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate) (PETG), and a modified PETG material (CPE) were used to produce 3D-printed parts and further subjected to moist heat (MH) and dry heat (DH) sterilization processes as affordable and widely used sterilization processes in the medical field. The effect of MH and DH was evaluated by performing a complete mechanical, structural, thermal, and morphological characterization before and after both treatments. In general, the moist heat treatment produced a higher degradation of the polymeric matrix of PETG and CPE due to hydrolytic and thermal degradation, particularly affecting the tensile test and flexural properties. For instance, the linear coefficient of thermal expansion (LCTE) before glass transition temperature (Tg) increased 47% and 31% in PETG samples due to the MH and DH, respectively, while it increased 31% in CPE due to MH and was mainly maintained after the DH process. Nevertheless, in PLA, the MH produced an increase of 20% in LCTE value and the DH showed an increase of 33%. Dry heat treatment resulted in being more suitable for medical applications in which dimensional accuracy is not a key factor and there are no great mechanical demands (e.g., surgical guides)., Project with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility

  • Barandiaran, Alejandro
  • Moreno-García, Virginia
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Sellés, M.A.|||0000-0002-0784-5757
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] This study demonstrates the potential of different cinnamate esters, namely methyl trans-cinnamate (MC), isobutyl cinnamate (IBC), allyl cinnamate (AC), and ethyl cinnamate (EC), as environmentally friendly plasticizers for polylactide (PLA). Plasticized PLA formulations with a constant nominal wt% of 20 of each plasticizer are compounded in a twin-screw co-rotating extruder and subsequently processed by injection molding. The results show exceptional plasticization efficiency of AC with an increase in elongation at break from 3.9% (neat PLA), up to 339.4% and a remarkable increase in impact strength, thus showing great potential to overcome the main drawback related to PLA intrinsic brittleness. The incorporation of cinnamates in a PLA matrix leads to a decrease in Tg from 61.7 °C down to 36.1 °C for the plasticized PLA formulation containing 20 wt% AC. Thermogravimetry analysis reveals that a slight plasticizer loss occurs during processing, as it happens with other monomeric plasticizers, but this phenomenon does not limit their plasticization efficiency. Therefore, the results obtained in this study confirm the suitability of a new family of organic compounds derived from the esterification of cinnamic acid as green plasticizers for PLA with improved toughness, with comparable, or even superior, ductile properties of typical plasticizers for PLA., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funding for open access charge: Universitat Politecnica de Valencia. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). JaumeGomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant(ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Juan Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Virginia Moreno wants to thank Generalitat Valenciana-GVA for funding a postdoc position through the APOSTD program co-funded by ESF Investing in your future, grant number CIAPOS/2021/67. D. Lascano acknowledge the Margarita Salas postdoctoral grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Open access funding provided by Universitat Politecnica de Valencia within the CRUE/UNIRIS gold Agreement.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manufacturing and Characterization of Environmentally Friendly Wood Plastic Composites Using Pinecone as a Filler into a Bio-Based High-Density Polyethylene Matrix

  • Morcillo-Esquerdo, María del Carmen
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Tejada, Ramón
[EN] The use of wood plastic composites (WPC) is growing very rapidly in recent years, in addition, the use of plastics of renewable origin is increasingly implemented because it allows to reduce the carbon footprint. In this context, this work reports on the development of composites of bio-based high density polyethylene (BioHDPE) with different contents of pinecone (5, 10, and 30 wt.%). The blends were produced by extrusion and injection-molded processes. With the objective of improving the properties of the materials, a compatibilizer has been used, namely polyethylene grafted with maleic anhydride (PE-g-MA 2 phr). The effect of the compatibilizer in the blend with 5 wt.% has been compared with the same blend without compatibilization. Mechanical, thermal, morphological, colorimetric, and wettability properties have been analyzed for each blend. The results showed that the compatibilizer improved the filler¿matrix interaction, increasing the ductile mechanical properties in terms of elongation and tensile strength. Regarding thermal properties, the compatibilizer increased thermal stability and improved the behavior of the materials against moisture. In general, the pinecone materials obtained exhibited reddish-brown colors, allowing their use as wood plastic composites with a wide range of properties depending on the filler content in the blend., Project with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and grant number AICO/2021/025 funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of non-ester monoterpenoids as biobased plasticizers for polylactide with improved ductile behaviour

  • Tejada-Oliveros, Ramón
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Montanes, Nestor|||0000-0001-6070-127X
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] Poly(lactide) (PLA) is a biodegradable aliphatic polyester derived from renewable resources. This material is characterized by high strength and stiffness; however, it has a high brittleness which makes it difficult to use in certain applications. In the present work, the plasticizing effect of different non-ester monoterpenoids, namely carvone, citral, citronellal and eucalyptol, on the mechanical, thermal, morphological, physical and chemical properties of PLA has been studied. In this case, different amounts (10 and 20 wt%) of each monoterpenoid were mixed with PLA in a twin-screw extruder and standardized samples were obtained by injection molding. The obtained results show how the addition of 20 wt% of the different monoterpenoids significantly improves the elongation at break of PLA, reaching values of 335.7 % for 20 wt% citral content, which represents an increase of about 4044 % with respect to pure PLA (8.1 %). In addition, a significant reduction in the tensile strength and Young's modulus of PLA has also been observed with the presence of monoterpenoids. The addition of monoterpenoids also leads to a decrease in the glass transition temperature and crystallization temperature of PLA due to the increased mobility of the polymeric chains caused by the plasticizing effect of the monoterpenoids, this decrease being more noticeable in the case of citral and citronellal, which are the monoterpenoids with the highest miscibility with PLA. Finally, it has been observed that the addition of monoterpenoids hardly affects the transparency of PLA, obtaining materials that may have a high potential in sectors such as food packaging. Therefore, it has been demonstrated that these non-ester monoterpenoids, especially citral, have a great potential to obtain environmentally friendly PLA formulations with improved toughness., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. L. Quiles-Carrillo wants to thank "Vicerrectorado de Investigacion" at Universitat Politecnica de Valencia (UPV) for partial funding of this research through the program "Funds for First Research Projects" (PAID-06-22). J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy services at UPV are acknowledged for their help in using and collecting FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Procesado y caracterización de formulaciones industriales de poliésteres alifáticos mediante tecnologías de inyección y fabricación aditiva

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[ES] El principal objetivo de la presente tesis doctoral se centra en la obtención de poliésteres alifáticos con propiedades mejoradas para su empleo en procesos industriales aplicando técnicas de fabricación específicas de polímeros como son el proceso de inyección o la fabricación aditiva. Para alcanzar dicho objetivo se proponen diferentes estrategias como la incorporación de aditivos plastificantes de origen natural, la incorporación de cargas naturales, la obtención de mezclas con otros polímeros, así como la incorporación de aditivos orientados al sector médico. En una primera fase, se han estudiado los poliésteres alifáticos de la familia de los polihidroxialcanoatos - PHA. Las modificaciones realizadas a los polihidroxialcanoatos van desde la incorporación de residuos de cáscara de almendra para la obtención de composites, el desarrollo de mezclas binarias con poli(¿-caprolactona) para la mejora de las propiedades dúctiles y el análisis del efecto de diferentes plastificantes derivados de terpenoides, concretamente ésteres de geraniol. En esta primera fase se propone el uso del moldeo mediante inyección para la determinación precisa de las propiedades que alcanzan las formulaciones tras las modificaciones realizadas. Posteriormente se propone el uso de los polihidroxialcanoatos para su empleo en el sector médico debido a sus propiedades biocompatibles y bioabsorbibles. En un primer momento se opta por analizar el efecto de los parámetros a emplear en fabricación aditiva empleando PHA, siendo polímeros con una ventana de procesado bastante estrecha, y con una alta sensibilidad al grado de cristalinidad que alcanzan en función de las condiciones de enfriamiento. La incorporación de aditivos osteoconductores como la hidroxiapatita tiene un especial interés para la mejora del proceso de regeneración ósea; es por ello que se considera como aditivo para PHA en el sector médico. En un primer trabajo, se propone el uso del proceso de moldeo por inyección para determinar las propiedades que se obtienen con la incorporación de las nanopartículas de hidroxiapatita. Posteriormente, esas mismas formulaciones se emplean en impresión 3D para ofrecer una aplicación más directa al sector médico mediante la obtención de scaffolds que pueden ser empleados en procesos de regeneración ósea. Finalmente, esta tesis aborda el empleo de ácido poliláctico - PLA, empleando las técnicas de conformado mediante inyección y fabricación aditiva. El PLA es un poliéster alifático con propiedades y coste interesante, pero presenta una elevada fragilidad; es por ello que el uso de plastificantes naturales derivados de ésteres del ácido itacónico ofrece una especial relevancia para el desarrollo de formulaciones con alta ductilidad. Adicionalmente, el PLA es un material con alto interés en fabricación aditiva. El empleo de diferentes patrones y la cantidad de relleno tiene un efecto marcado sobre el comportamiento mecánico de los componentes fabricados mediante impresión 3D, que también está vinculado con el tiempo necesario para completar la impresión. Una de las aplicaciones interesantes de la fabricación aditiva con PLA, es la fabricación de dispositivos médicos con la capacidad de ser reabsorbidos por el cuerpo humano de forma progresiva. En este sentido se propone el diseño y validación de una prótesis de fijación ósea para fémur., [CA] El principal objectiu de la present tesi doctoral se centra en l'obtenció de polièsters alifàtics amb propietats millorades per al seu ús en processos industrials aplicant tècniques de fabricació específiques de polímers com són el procés d'injecció o la fabricació additiva. Per a aconseguir aquest objectiu es proposen diferents estratègies com la incorporació d'additius plastificants d'origen natural, la incorporació de càrregues naturals, l'obtenció de mescles amb altres polímers, així com la incorporació d'additius orientats al sector mèdic. En una primera fase, s'han estudiat els polièsters alifàtics de la família dels polihidroxialcanoats - PHA. Les modificacions realitzades als polihidroxialcanoats van des de la incorporació de residus de corfa d'ametla per a l'obtenció de compòsits, el desenvolupament de mescles binàries amb poli(¿-caprolactona) per a la millora de les propietats dúctils i l'anàlisi de l'efecte de diferents plastificants derivats de terpenoids, concretament èsters de geraniol. En aquesta primera fase es proposa l'ús del moldeig mitjançant injecció per a la determinació precisa de les propietats que aconsegueixen les formulacions després de les modificacions realitzades. Posteriorment es proposa l'ús d'aquests polihidroxialcanoats per al seu ús en el sector mèdic donat que tenen propietats biocompatibles i bioabsorbibles. En un primer moment s'opta per analitzar l'efecte dels paràmetres a emprar en fabricació additiva en els utilitzant PHA, donat que es tracta de polímers amb una finestra de processament bastant estreta, i amb una alta sensibilitat pel grau de cristal·linitat que aconsegueixen en funció de les condicions de refredament. La incorporació d'additius osteoconductors com la hidroxiapatita té un especial interés per a la millora del procés de regeneració òssia; és per això que es considera com a additiu per a PHA per al sector mèdic. En un primer treball, es proposa l'ús del procés de moldeig per injecció per a determinar les propietats que s'aconsegueixen amb la incorporació de les nanopartícules d'hidroxipatita. Posteriorment, aqueixes mateixes formulacions s'utilitzen en impressió 3D per oferir una aplicació més directa al sector mèdic mitjançant l'obtenció d'scaffolds que poden ser emprats en processos de regeneració òssia. Finalment, aquesta tesi aborda l'ús de l'àcid poliláctic - PLA emprant les tècniques de conformat mitjançant injecció i fabricació additiva. El PLA és un polièster alifàtic amb propietats i cost interessants, però presenta una elevada fragilitat; és per això que l'ús de plastificants naturals derivats d'èsters de l'àcid itacònic té una especial rellevància per al desenvolupament de formulacions amb alta ductilitat. Addicionalment, el PLA és un material amb alt interés en fabricació additiva. L'ús de diferents patrons i la quantitat de farciment té un efecte marcat sobre el comportament mecànic dels components fabricats mitjançant impressió 3D, que també està vinculat amb el temps necessari per a completar la impressió. Una de les aplicacions interessants de la fabricació additiva amb PLA, és la fabricació de dispositius mèdics amb la capacitat de ser reabsorbits pel cos humà de manera progressiva. En aquest sentit es proposa el disseny i validació d'una pròtesi de fixació òssia per a fèmur., [EN] The main objective of this thesis is to obtain aliphatic polyesters with improved properties for their application in industrial processes by applying conventional polymer processing techniques such as injection moulding and additive manufacturing. In order to reach the aforementioned objective several strategies are proposed such as the incorporation of natural origin plasticizing additives, the incorporation of natural fillers, the development of polymer blends and the incorporation of additives for the medical sector. The first stage of this research consists in the study of aliphatic polyesters from polyhydroxyalkanoates - PHA. The modifications made to those polymers have been the introduction of almond shell wastes to produce composites, the development of binary blends with poly(¿-caprolactone) to improve ductile properties and the addition of different plasticizers derived from terpenoids, more specifically geraniol esters. In this first stage, injection-moulding is proposed to obtain all the properties and features of the formulations after the aforementioned modifications. Afterwards, the use of these polyhydroxyalkanoates in the medical sector due to they are biocompatible and resorbable, is proposed. First, the effect of the parameters to be used in additive manufacturing of PHA is analysed. These polymers possess a very narrow processing window and a great sensitiveness to the degree of crystallinity depending on the cooling conditions. The incorporation of osteoconductive additives such as hydroxyapatite is of great interest for the improvement of the bone regeneration process, so it is considered as an additive of PHA for medical applications. It is for this reason that in the first work, injection moulding is used for determining the effect of nanohydroxyapatite have on the polymer matrix. Then, the developed formulations are used in 3D printing to assess the feasibility of this technology for the medical sector by obtaining scaffolds structures that can be used in bone regeneration processes. Finally, poly(lactic acid) - PLA is processed by injection-moulding and additive manufacturing to assess the feasibility of these techniques. PLA is a cost-effective aliphatic polyester with balanced properties; nevertheless, it shows high intrinsic brittleness. Therefore, the use of natural plasticizers derived from esters of itaconic acid are of especial interest for the development of formulations with improved toughness. Additionally, PLA is a material with a great interest in additive manufacturing. The use of different patterns and infills used in 3D printing play a key role on mechanical behavior of the 3D-printed components, which is also related to the overall 3D-printing time. One of the interesting applications of additive manufacturing with PLA, is the production of medical devices with the ability to be progressively reabsorbed by the human body. In this sense, the design and validation of a femur fixing prosthesis is proposed., I would like to thank the Ministry of Universities for their financial support through the FPU grant FPU19/01759 regarding my PhD studies. I am very grateful to Universitat Politècnica de València for their financial support through the FPI PhD grant PAID–2019– SP20190011. I thank the Ministry of Science and Innovation for their financial support to the research group in the projects RTI2018–097249–B–C21, MAT2017–84909–C2–2–R and PID2020–116496RB–C22. I acknowledge Generalitat Valenciana for their grants AICO/2021/025 and CIGE/2021/094 as a support to the research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green antioxidant composites based on coffee by-products from the alcohol industry

  • Terroba-Delicado, Enrique
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Montanes, Nestor|||0000-0001-6070-127X
[EN] Bio-based high-density polyethylene (BioHDPE)-loaded composites with different amounts of spent coffee powder (up to 30 wt.%) were successfully produced. The use of coffee residues coming from the alcoholic beverage industry in a BioHDPE matrix resulted in a remarkable improvement in the antioxidant properties of the composites. Waste spent coffee powder reduced the elastic modulus, hardness and storage modulus; the reduction was proportional to the amount of by-product considered. To improve the interaction between the highly hydrophobic BioHDPE matrix and the highly hydrophilic spent coffee powder, a copolymer - namely, poly(ethylene-graft-maleic anhydride) (PE-g-MA) - was used. PE-g-MA addition resulted in an improved interaction between the particles and poly(lactic acid), as confirmed by field emission scanning electron microscopy. On the other hand, the presence of the lignocellulosic filler resulted in a low load transfer between the two components, which led to a decrease in tensile strength. The introduction of coffee powder resulted in an improvement in thermal stability, as confirmed by thermogravimetry and differential scanning calorimetry. Finally, antioxidant activity was also observed in the composites, wherein a 27% reduction in 2,2-diphenyl-1-picrylhydrazyl was reported for the composite with the highest coffee content. The presence of antioxidant substances (coffee oil) was confirmed by Fourier transform infrared spectroscopy., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). J. Ivorra-Martinez would like to express thanks for FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Gomez-Caturla would like to express thanks for FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Also, Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images. The authors also want to acknowledge Licores Sinc (Alcoy, Spain) for its collaboration in this project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of the Ductility of Environmentally Friendly Poly(lactide) Composites with Posidonia oceanica Wastes Plasticized with an Ester of Cinnamic Acid

  • Barandiaran, Alejandro
  • Moreno-García, Virginia
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Sellés, M.A.|||0000-0002-0784-5757
[EN] New composite materials were developed with poly(lactide) (PLA) and Posidonia oceanica fibers through reactive extrusion in the presence of dicumyl peroxide (DCP) and subsequent injection molding. The effect of different amounts of methyl trans¿cinnamate (MTC) on the mechanical, thermal, thermomechanical, and wettability properties was studied. The results showed that the presence of Posidonia oceanica fibers generated disruptions in the PLA matrix, causing a decrease in the tensile mechanical properties and causing an impact on the strength due to the stress concentration phenomenon. Reactive extrusion with DCP improved the PO/PLA interaction, diminishing the gap between the fibers and the surrounding matrix, as corroborated by field emission scanning electron microscopy (FESEM). It was observed that 20 phr (parts by weight of the MTC, per one hundred parts by weight of the PO/PLA composite) led to a noticeable plasticizing effect, significantly increasing the elongation at break from 7.1% of neat PLA to 31.1%, which means an improvement of 338%. A considerable decrease in the glass transition temperature, from 61.1 °C of neat PLA to 41.6 °C, was also observed. Thermogravimetric analysis (TGA) showed a loss of thermal stability of the plasticized composites, mainly due to the volatility of the cinnamate ester, leading to a decrease in the onset degradation temperature above 10 phr MTC., This research is a part of the grant PID2020-116496RB-C22 and TED2021-131762A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union ¿NextGenerationEU¿/PRTR¿. The authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025 and CIGE/2021/094, for supporting this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of biodegradable PLA composites and tangerine peel flour with improved toughness containing a natural-based terpenoid

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] The present work reports on the development of environmentally friendly, completely biodegradable wood plastic composites based on polylactide (PLA) and tangerine peel flour (TPF), plasticized by ¿-terpinyl acetate (TA). The TPF varied in the 10¿30 wt% while the PLA to TA (wt%/wt%) was set to 4 (i.e., 25 wt% TA plasticizer was added with regard to the PLA wt%). The developed composites were processed by extrusion and injection molding. The composites presented excellent elongation at break, achieving values of 300% for the PLA+TA sample. Elongation at break values of 200% for the PLA composite with 10 wt% TPF and plasticized with TA were obtained. Those results were confirmed by the appearance of filament-like structures observed in field emission scanning electron microscopy images. Differential scanning calorimetry and dynamic mechanical thermal analysis revealed a remarkable decrease in the glass transition temperature of PLA as a result of the plasticizing effect of TA. Glass transition was reduced from 63°C down to 41°C approximately. This implied an increase in the ductility of the material. The samples with TPF exhibited a dark brown color, making them perfect for wood plastic composite applications. Water contact angle results show that TA and TPF change the wetting properties of the obtained composites. A general decrease in the water contact angle was observed with the addition of TPF and TA. Finally, disintegration tests proved that the developed composites are fully biodegradable. All the samples except for neat PLA achieved 100% disintegration in controlled compost soil conditions after 5 weeks, while neat PLA reached complete disintegration in 6 weeks., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025, and CIGE/2021/094 for supporting this work. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New tartrate and alpha-tocopherol based environmentally friendly plasticizers for improvement of the ductility of polylactic acid

  • Gazquez-Navarro, J.J.
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[EN] This study focuses on developing environmentally friendly plasticized poly(lactide) (PLA) formulations using tartaric acid and ¿-tocopherol at 20 wt%. The extrusion and injection molding processes demonstrated the industrial applicability of these plasticizers. Mechanical tests revealed positive results for tartrate-based plasticizers, with elongation at break surpassing 220 %, while ¿-tocopherol succinate achieved 170 %. However, ¿-tocopherol acetate showed limited PLA plasticization. Field emission scanning electron microscopy confirmed plasticization in fractured surfaces. Thermal analysis indicated a reduction in PLA's glass transition temperature (Tg) from 60 °C to around 30 °C with these plasticizers, underscoring tartrates' exceptional efficiency. The cold crystallization temperature (Tcc) decreased for all plasticized samples due to enhanced chain mobility. Thermomechanical analysis revealed dimensional shrinkage, with dimethyl tartrate (DMT) causing less pronounced effects. Generally, tartrates yielded formulations with superior properties, attributed to their lower molecular weight compared to ¿-tocopherol-derived plasticizers. Notably, all plasticizers employed are an eco-friendly approach to improve PLA's processability and enhancing ductile properties., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22) , Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) . J. G. -C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biopolypropylene-Based Wood Plastic Composites Reinforced with Mango Peel Flour and Compatibilized with an Environmentally Friendly Copolymer from Itaconic Acid

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports on the successful development of biopolypropylene/mango peel flour (bioPP/MPF) composites using extrusion and injection molding processes. The compatibility between bioPP and MPF is improved through the use of PP-g-IA (3 phr) as a compatibilizer (which is prepared by reactive extrusion REX) and dicumyl peroxide (DCP) (1 phr) as a cross-linker. The mechanical, morphological, thermal, thermomechanical, chemical, colorimetric, water absorption, and flowability properties are characterized and analyzed. The results show that MPF (30 wt %) compatibilized with PP-g-IA and DCP increased the stiffness of bioPP in terms of Young¿s modulus values. Elongation at break also shows very promising results, with a maximum value of almost 30% for the bioPP/MPF/PP-g-IA/DCP sample. PP-g-IA and DCP seem to exert a synergetic effect. Thermal stability is also improved as a result of these additives, as well as crystallinity, which is increased due to an heterogeneous nucleation phenomenon, enhanced by a higher dispersion of MPF particles in the matrix. Moreover, the excellent mechanical results are verified in FESEM images, where a very narrow gap between the MPF particles and the bioPP matrix is appreciated., J.G.-C., R.B., J.I.-M., D.G.-G., F.D., D.P., and L.T. received funding from the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 (Agencia estatal de Investigacion). J.G.-C., R.B., J.I.-M., D.G.-G., F.D., D.P., and L.T. also received funding from Generalitat Valenciana-GVA with grant number AICO/2021/025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the chain length of geraniol esters on the plasticization efficiency with poly(lactide)

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Tejada-Oliveros, Ramón
  • Moreno-García, Virginia
[EN] This work reports on the development of environmentally friendly PLA formulations utilizing different esters derived from geraniol as plasticizers. Geranyl formate, acetate, propionate, butyrate, isovalerate and caproate at 10 wt% were combined with PLA in formulations that were produced through extrusion and injection moulding processes. Theoretical solubility parameter studies predicted good miscibility between PLA and all the plasticizers. This was confirmed by tensile test, which showed elongation at break values between 200 and 300 %, totally in contrast with the 8 % value of neat PLA. Geranyl acetate and geranyl formate exhibited the highest elongation at break behavior. These values of elongation at break were supported by FESEM images, which showed clear signs of plasticization. The plasticization effect was further corroborated by DSC and DMTA analysis, where a clear decrease in the glass transition temperature was observed from a typical value of 60 °C for neat PLA down to 40¿50 °C for the plasticized blends. This was related to an enhanced chain mobility of the amorphous regions of PLA. Moreover, the plasticizers slightly increased the water absorption capabilities of PLA, as demonstrated by an increase in the water contact angle and water uptake for 11 weeks., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021- 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice -rectorate for Research of the Universitat Politecnica de Valencia (UPV) . R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. V. M. thanks Ge eralitat Valenciana-GVA for funding a postdoc position through the APOSTD program co -funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-cost fabrication and characterisation of a flexible graphite-based touch sensor, Fabricación y caracterización de bajo coste de un sensor táctil flexible basado en grafito

  • Tormo-García, Francisco-Javier
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Montanes, Nestor|||0000-0001-6070-127X
[ES] En el presente trabajo se expone un nuevo método de elaboración de un sensor piezoresistivo flexible basado en grafito. Bajo la premisa de una fabricación low cost, los materiales empleados son de fácil adquisición y el proceso de fabricación consiste en una sencilla transferencia y exfoliación de una pasta de grafito para obtener láminas flexibles. De esta forma se obtienen sensores con sensibilidad al tacto y la presión. Para caracterizar su respuesta, se ha desarrollado un método ad hoc que pretende recrear la interacción del sensor con un dedo humano, el cual es mostrado con detalle. El resultado presentado es un sensor de grafito de alta sensibilidad, estable y con múltiples posibilidades de aplicación, como por ejemplo en prótesis inteligentes, en sistemas de captura del movimiento del cuerpo humano y hasta incluso para su uso como piel sintética., J. I.-M. quiere agradecer la beca FPU19/01759 financiada por MCIN/AEI/10.13039/501100011033 y por ESF Investing in your future. Esta investigación forma parte del proyecto PID2020-116496RB-C22 financiado por MCIN/AEI/10.13039/501100011033, y de los proyectos AICO/2021/025 y CIGE/2021/094 financiados por Generalitat Valenciana-GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Liquor Waste Derived Spent Coffee Grains for the Development of Injection-Molded Polylactide Pieces of Interest as Disposable Food Packaging and Serving Materials

  • Terroba-Delicado, Enrique
  • Fiori, Stefano
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Montanes, Nestor|||0000-0001-6070-127X
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present work puts the Circular Bioeconomy's concept into action, originally valorizing residues of spent coffee grains from the beverage liquor coffee industry to develop green composite pieces of polylactide (PLA). The as-received spent coffee grains were first milled to obtain the so-called spent coffee grounds (SCGs) that were, thereafter, incorporated at 20 wt.% into PLA by extrusion. Finally, the resultant green composite pellets were shaped into pieces by injection molding. Moreover, two oligomers of lactic acid (OLAs), namely OLA2 and OLA2(mal), the latter being functionalized with maleic anhydride (MAH), were added with SCGs during the extrusion process at 10 wt.%. The results show that, opposite to most claims published in the literature of green composites of PLA, the incorporation of the liquor waste derived SCGs increased the ductility of the pieces by approximately 280% mainly due to their high lipid content. Moreover, the simultaneous addition of OLA2 and OLA2(mal) further contributed to improve the tensile strength of the green composite pieces by nearly 36% and 60%, respectively. The higher performance of OLA2(mal) was ascribed to the chemical interaction achieved between the biopolyester and the lignocellulosic fillers by the MAH groups. The resultant green composite pieces are very promising as disposable food-serving utensils and tableware., The authors wish to thank the Spanish Ministry of Science and Innovation (MICI), grant number MEN PID2020-116496RB-C22, for funding this research. S. Torres-Giner acknowledges the Spanish Ministry of Science and Innovation (MICI) for the funding received during his Ramón y Cajal contract (RYC2019-027784-I) and J. GomezCaturla wishes to thank UPV for his FPI grant (SP20200080). Condensia Condensia Química Inc. (Barcelona, Spain) and Licores Sinc S.A. (Alcoy, Spain) are both acknowledged for generously providing the raw materials. The authors are also grateful to the microscopy services at UPV for their help in collecting and analyzing the FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and characterization of edible films based on starch isolated from different Colombian potato varieties

  • Barandiaran, A.
  • Florez-Prieto, M.A.
  • Ávila-Martin, L.
  • Perilla, Jairo E.
  • Montanes, Nestor|||0000-0001-6070-127X
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work reports on the extraction and characterization of the behavior of starch from residues of several potato varieties (Criolla, Sabanera and Pastusa) of Colombian origin from the Andean region using different techniques and the evaluation of the effect of citric acid (CA) on the grain morphology. Additionally, films were produced with each one of the extracted starches and glycerol. Pastusa variety starch shows a higher granule size than the other varieties and Pastusa starch shows lower amylose content compared to Sabanera and Criolla. Criolla and Pastusa starches exhibit more thermal stability than Sabanera starch. Starch-glycerol films were also produced using the cast solving method. The films were mechanically analyzed by tensile test and the barrier properties were assessed by water vapor permeability (WVP). The tensile strength of the films varied in the 2.0¿2.4 MPa range, while the elongation at break was comprised between 25 and 32 %. With regard to water vapor permeability, the obtained values fall within the 4¿7 × 10¿10 g m-1 s-1 Pa-1 range. It was observed that the thickness of the films and the protein content affected water vapor permeability, increasing this value at higher levels of thickness., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing biobased thermoset resins by incorporating cinnamon derivative into acrylated epoxidized soybean oil

  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] The study successfully developed thermoset materials utilizing acrylate epoxidized soybean oil (AESO) and allyl cinnamate (ACIN) with tert-butyl peroxybenzoate (TBPB) as the initiator. Isothermal curing at temperatures between 110 °C to 140 °C of the developed formulations, showed that higher temperatures accelerated the conversion process. The higher curing temperature increased the degree of conversion, leading to obtain the best flexural strength for samples cured at 130 °C. However, samples cured at 120 °C exhibited better impact properties due to a lower degree of conversion, which allows for a more mobile reticular network. In addition, morphological observations confirmed these mechanical property trends. Dynamic thermal characterization revealed changes in glass transition temperature and exothermic reactions due to unreacted products appeared for materials cured at low temperature. Increasing curing temperature allowed to enhance thermal stability by increasing molecular weight. Finally, thermomechanical analysis confirmed stiffness and glass transition temperature increases observed during flexural tests and thermal characterization., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. D.L. thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2022/140. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Performance PA6 Composites Reinforced with Recycled Aramid Fibers from Firefighter Protective Clothing

  • Marco-Sanjuan, Joaquin
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] The recycling of technical textile waste represents a major challenge due to the complex and multilayered structure of these materials. Firefighter protective clothing, mainly composed of high-performance aramid fibers combined with polymeric membranes and auxiliary textile components, is commonly landfilled or incinerated at the end of its service life, resulting in a significant environmental impact. This work utilized recycled aramid-rich textile waste obtained from end-of-life firefighter protective clothing as reinforcement for polyamide 6 to develop high-performance thermoplastic composites within a circular economy framework. Composites containing 15, 30, 45, and 60 wt.% of recycled textile waste were manufactured by melt compounding followed by injection molding. In addition, a selected formulation containing 30 wt.% reinforcement was compatibilized using an amino-functional silane to improve interfacial adhesion. The materials were systematically characterized in terms of tensile properties, thermal be-havior, thermomechanical performance, water uptake, flammability, colorimetric properties, and fracture morphology by field emission scanning electron microscopy. The results revealed a pronounced increase in stiffness and thermomechanical stability, with tensile strength increasing from approximately 65 MPa for neat PA6 up to 78 MPa at 30 wt.% reinforcement, and elastic modulus exceeding 5000 MPa at high reinforce-ment contents. An optimal balance between mechanical performance and ductility was achieved at 30 wt.% reinforcement, while higher contents enabled a substantial exten-sion of the service temperature range, with HDT values increasing from 55 °C for neat PA6 up to 173 °C for highly reinforced systems. FESEM analysis confirmed improved interfacial adhesion in silane-compatibilized systems, explaining the enhanced me-chanical and thermomechanical behavior. Furthermore, the incorporation of recycled aramid-rich textile waste led to a significant improvement in flame retardancy, enabling UL-94 V-0 classification at 30 wt.% reinforcement and above, without the use of addi-tional flame-retardant additives, enabling UL-94 V-0 classification without additional flame-retardant additives. Overall, this study demonstrates the technical feasibility and high added-value potential of valorizing firefighter protective clothing waste into ad-vanced PA6-based composites with enhanced mechanical, thermal, and fire-resistant properties, providing a sustainable route for the valorization of high-performance textile waste., This research was partially supported by the Spanish Ministry of Science and Innovation through the projects PID2020-116496RB-C22 and PID2021-123753NA-C33 funded by MCIN/AEI/10.13039/501100011033. Additional funding was provided by project TED2021-131762AI00, funded by the European Union NextGenerationEU/PRTR. Part of the research activities were also developed within the framework of the UP-CIRCULAR and TEXPLAST projects funded by the Conselleria de Innovación, Industria, Comercio y Turismo of the Generalitat Valenciana through IVACE (IMAM-CA/2024/6 and IMAM-CA/2023/6).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Effect of Varying the Amount of Short Hemp Fibers on Mechanical and Thermal Properties of Wood Plastic Composites from Biobased Polyethylene Processed by Injection Molding

  • Dolçà, Celia
  • Fages, Eduardo
  • Gonga, Eloi
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] Biobased HDPE (bioHDPE) was melt-compounded with different percentages (2.5 to 40.0 wt.%) of short hemp fibers (HF) as a natural reinforcement to obtain environmentally friendly wood plastic composites (WPC). These WPC were melt-compounded using a twin-screw extrusion and shaped into standard samples by injection molding. To improve the poor compatibility between the high non-polar BioHDPE matrix and the highly hydrophilic lignocellulosic fibers, a malleated copolymer, namely, polyethylene-graft-maleic anhydride (PE-g-MA), was used. The addition of short hemp fibers provided a remarkable increase in the stiffness that, in combination with PE-g-MA, led to good mechanical performance. In particular, 40 wt.% HF drastically increased the Young¿s modulus and impact strength of BioHDPE, reaching values of 5275 MPa and 3.6 kJ/m2, respectively, which are very interesting values compared to neat bioHDPE of 826 MPa and 2.0 kJ/m2. These results were corroborated by dynamic mechanical thermal analysis (DMTA) results, which revealed a clear increasing tendency on stiffness with increasing the fiber loading over the whole temperature range. The crystal structure was not altered by the introduction of the natural fibers as could be seen in the XRD patterns in which mainly the heights of the main peaks changed, and only small peaks associated with the presence of the fiber appeared. Analysis of the thermal properties of the composites showed that no differences in melting temperature occurred and the non-isothermal crystallization process was satisfactorily described from the combined Avrami and Ozawa model. As for the thermal degradation, the introduction of HF resulted in the polymer degradation taking place at a higher temperature. As for the change in color of the injected samples, it was observed that the increase in fiber generated a clear modification in the final shades of the pieces, reaching colors very similar to dark woods for percentages higher than 20% HF. Finally, the incorporation of an increasing percentage of fibers also increased water absorption due to its lignocellulosic nature in a linear way, which drastically improved the polarity of the composite., Project with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and grant number AICO/2021/025 funded by Generalitat Valenciana. European Regional Development Fund (ERDF) from the European Union for co-funding the project NABITEX Innovative technical textiles based on SUDOE natural fibers to be applied in Habitat Sector through the Interreg SUDOE Program (SOE2/P1/P0524) and CDTI (Centro para el Desarrollo Tecnológico Industrial) within the framework of grants for Technological Centres of Excellence Cervera (CER-20211013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FGD-Gypsum Waste to Capture CO2 and to Recycle in Building Materials: Optimal Reaction Yield and Preliminary Mechanical Properties

  • Moreno-García, Virginia
  • González-Arias, Judith
  • Ruiz-Martinez, Jaime D.
  • Baena-Moreno, Francisco Manuel
  • Leiva, Carlos
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The use of waste to capture CO2 has been on the rise, to reduce costs and to improve the environmental footprint. Here, a flue gas desulfurization (FGD) gypsum waste is proposed, which allows us to obtain a CaCO3-based solid, which should be recycled. The CO2 capture stage has primarily been carried out via the direct carbonation method or at high temperature. However, a high energy penalty and/or long reaction times make it unattractive from an industrial perspective. To avoid this, herein an indirect method is proposed, based on first capturing the CO2 with NaOH and later using an aqueous carbonation stage. This allows us to capture CO2 at a near-ambient temperature, improving reaction times and avoiding the energy penalty. The parameters studied were Ca2+/CO32¿ ratio, L/S ratio and temperature. Each of them has been optimized, with 1.25, 100 mL/g and 25 °C being the optimal values, respectively, reaching an efficiency of 72.52%. Furthermore, the utilization of the produced CaCO3 as a building material has been analyzed. The density, superficial hardness and the compressive strength of a material composed of 10 wt% of CaCO3 and 90 wt% of commercial gypsum, with a water/solid ratio of 0.5, is measured. When the waste is added, the density and the mechanical properties decreased, although the compressive strength and superficial hardness are higher than the requirements for gypsum panels. Thus, this work is promising for the carbonation of FGD-gypsum, which involves its chemical transformation into calcium carbonate through reacting it with the CO2 of flue gasses and recycling the generated wastes in construction materials., This research was funded by the grant FJC2021-047672-I co-financed by MCIN/AEI/10.13039/501100011033 from the European Union NextGenerationEU/PRTR funds, and by the Ministerio de Ciencia e Innovación of the Spanish Government under grant number PID2019-110928RB-C33.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO3 Fillers from Natural Resources

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldás-Carrasco, Miguel Fernando
  • Luca Motoc, Dana
[EN] This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3D-printed PLA performance. Samples of neat PLA and PLA reinforced with CaCO3 fillers embedded with different wt.% were prepared using an FDM (fused deposition modeling) technology. The samples were examined using mechanical, dynamic mechanical, thermal, and thermal decomposition analyses. The results revealed increasing elastic moduli, tensile strength, and flexure as the filler content increased. The rheological results from the MFR tests showed that the filler content did not influence the PLA-based samples' processability. Further, the thermal degradation of neat and various CaCO3-wt.%-reinforced PLA specimens revealed relatively small discrepancies in their exposure to the temperature increase, mainly concerning the eggshell organic components and volatile components, from their processability up to 300 degrees C. By contrast, the increased filler content positively shifted the peaks along the temperature scale at the maximum degradation rate. Additionally, the weight content of the natural reinforcement strongly influenced the surface wettability and appearance of the samples. Further, the SEM analysis featured both the presence of interlayer disturbances and the interfacial compatibility the PLA with the selected fillers., This research is a part of the grant, PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Raw Peach Gum as a Sustainable Additive for the Development of Water-Sensitive and Biodegradable Thermoplastic Starch Films

  • Juan-Polo, Andrea
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] In this study, formulations of thermoplastic starch (TPS) with 5, 10, and 15 parts per hundred resin (phr) of raw peach gum (PG) were prepared by melt extrusion followed by injection molding to obtain standard specimens for characterization. In addition, biodegradable films were developed by compression molding. It was determined that TPS with 5 phr and 10 phr of PG presented similar mechanical behavior to pure TPS after the processing. However, results indicated that adding PG in 10 phr slowed down the starch's retrogradation, delaying the TPS structure's stiffening. Moreover, the TPS-PG formulations presented improved solubility, which increased by 24% with 10 and 15 phr of PG compared to that shown for TPS. Additionally, PG enhanced the compostability of TPS, causing the sample to disintegrate in a shorter period. In conclusion, it was determined that raw PG added in 10 phr could be added as a sustainable additive to modify the biodegradation and water sensitivity of TPS without affecting its mechanical behavior after processing and delaying the retrogradation of the TPS structure, increasing its shelf life., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/ 501100011033 by the European Union NextGenerationEU /PRTR. Microscopy Services at UPV are acknowledged for their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasticization of poly(3-hydroxybutyrate) with biobased terpenoid esters of geraniol

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
  • Valencia, Yago
  • Agüero, Ángel
  • Arrieta, Marina Patricia
[EN] Poly(3-hydroxybutyrate) (P3HB) is, by far, one of the most promising bacterial polyesters at the commercial scale, but it is a brittle polymer due to physical aging occurring at room temperature, which promotes secondary crystallization. Plasticization is a cost-effective and technical approach to overcome or minimize, this drawback. In this work, the use of terpenoid-based organic compounds as plasticizers for P3HB is proposed. Geranyl esters with different chain length carboxylic acids, namely acetic (C2), propionic (C3), butyric (C4), and isovaleric (C5) acids, are used at a constant proportion with the main aim of improving the ductility of P3HB. In addition, thermal properties, morphology, and disintegration are also addressed. All geraniol-based plasticizers provided increased ductility. The elongation at break of neat P3HB (7.4%) increased up to 9.7%, which represents a percentage increase of 31.1%. A remarkable increase in toughness is also obtained by a change in the impact strength from 2.2 kJ·m¿2 (neat P3HB) up to 3.4 kJ·m¿2 with geranyl acetate. Thus, the proposed P3HB formulations widen the potential uses of P3HB since its ductile properties are improved. Other relevant results are related to the glass transition temperature reduction and an increase in the disintegration rate in controlled compost soil., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Likewise, Ángel Agüero thanks his Margarita Salas postdoctoral contract with the Universitat Politècnica de València, financed through the Ministry of Universities, by the European Union-Next generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of P(3HB-co-3HHx) nanohydroxyapatite (nHA) composites for scaffolds manufacturing by means of fused deposition modeling

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ferrer, Ines
  • Aguado, Roberto
  • Delgado-Aguilar, Marc
  • Garcia-Romeu, Maria Luisa
[EN] This work reports on the development of nanocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] and nanohydroxyapatite (nHA) for the development of scaffolds by means of a two-stage extrusion process followed by a 3D printing process. Tensile test samples were produced for the characterization of the materials. Each processing thermal cycle promoted a slight thermal degradation, identified by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Also, a viscosity reduction was observed in the rheological measurements. The 3D-printed tensile test samples exhibited increasing stiffness at increasing nHA content (with elastic modulus values close to 1000 MPa), while tensile strength and strain at break were reduced. Nonetheless, the deposition direction oriented with the tensile direction (raster angle of 0°C) exhibited the highest tensile strength (18 MPa) but lower elongation at break than the 45/45°C deposition, which resulted in the highest strain (up to 17 %). Regarding the scaffolds, they were degraded in phosphate-buffered saline at 37°C for 8 weeks. This degradation was identified by a reduction of their weight (between 1.5% and 3.0%) and reduced mechanical behavior measured by means of a compression test. Scaffolds showed a decrease of the compression strength (from values close to 13 MPa to 9 MPa)., Juan Ivorra-Martinez wants to thank for the FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ESF Investing in Your Future. Funding for open-access charge is provided by Universitat Politècnica de València (UPV). Marc Delgado-Aguilar is a Serra Húnter Fellow. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images. This work is supported bythe grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union. Authors also thank Generalitat Valenciana-GVA for Funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. This study is also funded by Aid for First Research Projects (PAID-06-22) , Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers

  • Tejada-Oliveros, Ramón
  • Fiori, Stefano
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/ 501100011033, and the grant number AICO/2021/025 funded by Generalitat Valenciana-GVA. R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J.G.-C. wishes to thank grant FPU20/01732 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged for their help in collecting and analysing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of High Environmentally Friendly Composites of Bio-Based Polyamide 1010 with Enhanced Fire Retardancy Properties by Expandable Graphite

  • Marset, David
  • Fages, Eduardo
  • Gonga, Eloi
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] Bio-based polyamide 1010 was melt-compounded with different percentages (2.5 to 10.0 wt.%) of expandable graphite (EGr) as an environmentally friendly solution to improve the flame retardancy properties. The mechanical, morphological, thermal and fire retardancy properties (among others) are analysed. The novelty of the article lies in the use of fully removable polyamide. The effect of the incorporation of EGr in the properties of this polymer was analysed and characterised. The incorporation of EGr into the PA1010 matrix led to very promising results. Mechanically, the EGr provided increased stiffness and a tensile strength up to 7.5 wt.%, verifying good mechanical performance. The DMTA results also show how the incorporation of EGr in the PA1010 matrix clearly increases the stiffness of the composites over the entire temperature range analysed. In terms of physical properties, water absorption of PA1010 was reduced particularly in the 10% EGr, which reduces the water absorption of PA1010 by 20%. In terms of flame retardant properties, with the incorporation of EGr, a significant reduction in the heat release rate (HRR) values as the concentration of the additive increases and a reduction in the maximum peak heat release rate (pHRR) can be observed for all compounds. In particular, it goes from 934 kW/m2 for neat polyamide to a value of 374 kW/m2 with 10% EGr. Finally, an improvement in the UL-94 rating of the 7.5 and 10% EGr composites was also observed, going from V-2 in the PA to V-1 in these composites, Project with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and grant number AICO/2021/025 funded by Generalitat Valenciana. AITEX wants to thank CDTI (Centro para el Desarrollo Tecnologico Industrial) within the framework of grants for Technological Centres of Excellence "Cervera" (CER-20211013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and characterization of high environmental performance composites of Bio-PBSA and short hemp fibers from different compatibilization strategies, Desarrollo y caracterización de compuestos de alto rendimiento medioambiental de Bio-PBSA y fibras cortas de cáñamo a partir de diferentes estrategias de compatibilización

  • Tejada-Oliveros, Ramón
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this research work, the effect of various compatibilizing agents on naturally sourced composites formed from poly(butylene succinate-co-adipate) - PBSA and short hemp fibers has been analyzed. Hemp has been employed as a natural reinforcement to obtain environmentally friendly composites, using biobased PBSA as a matrix. These composites were obtained from twin-screw extrusion and shaped by injection molding. To improve the poor compatibility between the matrix and lignocellulosic fibers, different compatibilizing agents were used, including a maleic anhydride graft copolymer (PBSA-g-MA), a copolymer based on itaconic acid (PBSA-g-IA) and dibutyl itaconate (DBI). The addition of these compatibilizers provided different levels of improvement with respect to the PBSA/hemp base compound. In relation to the mechanical properties, the addition of the copolymers significantly increased the maximum tensile stress, with values around 20 MPa, with respect to the 8,86 MPa of the PBSA/hemp uncompatibilized composite. The addition of DBI to the base blend led to an improvement in the elongation at break of 82% (3,51% elongation at break of the base blend versus 6,40% with the addition of DBI). These results are in agreement with those obtained in dynamic mechanical thermal analysis (DMTA), where the incorporation of hemp fibers and the combination of the different compatibilizers resulted in an improvement in stiffness over the entire temperature range., Los autores agradecen la financiación otorgada gracias al proyecto con número de subvención PID2020-116496RB-C22 financiado por el Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 y número de subvención AICO/2021/025 financiado por la Generalitat Valenciana. R. T.-O. quiere agradecer a la UPV la subvención recibida a través del programa PAID-01-20. J. I.-M. quiere agradecer la beca FPU19/01759 financiada por MCIN/AEI/10.13039/501100011033 y por el FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Inclusión de las ODS y aplicación de la metodología de Trabajo en Equipo-Logro individual en la preparación de almidón termoplástico en el laboratorio de la asignatura “Materiales Ecoeficientes”, Inclusion of the SDGs and application of the Student Team-Achievement Division methodology in the preparation of thermoplastic starch in the laboratory of the subject &quot, Eco-efficient Materials”

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldas, Miguel
  • Arrieta, Marina
[EN] In the present work, the inclusion of the Sustainable Development Goals (SDG) was carried out in the laboratory practices of “Eco-efficient materials”. At the same time, the teaching methodology of the Student Team-Achievement Division (STAD) was implemented for the development of a laboratory practice. On the one hand, it was determined that the SDGs related to the subject are SDG 6 (clean water and sanitation), SDG 11 (sustainable cities and communities) and SDG 12 (responsible production and consumption). Through an evaluation it was observed that the students have a good understanding of the ODS and a high capacity to relate the activities of the subject with the contribution to the fulfillment of each objective, however, a continuing education that provides knowledge and skills is not considered important. to support sustainable development. On the other hand, the implementation of the STAD methodology showed a high level of acceptance by the students and proved to be efficient in increasing motivation and individual improvement. However, it is considered important to continue applying the technique to determine the long-term effect and obtain more accurate conclusions., [ES] En el presente trabajo se realizó la inclusión de los Objetivos del Desarrollo Sostenible (ODS) en las prácticas del laboratorio de la asignatura de “Materiales Ecoeficientes” y al mismo tiempo se implementó le metodología se enseñanza de trabajo en equipo-logro individual (TELI) para el desarrollo de una práctica de laboratorio. Por un lado, se determinó que las ODS relacionadas con la asignatura son el ODS 6 (agua limpia y saneamiento), ODS 11 (ciudades y comunidades sostenibles) y el ODS 12 (producción y consumo responsable) y mediante una evaluación se observó que los estudiantes tienen un buen entendimiento de las ODS y una alta capacidad de relación entre las actividades de la asignatura con el aporte al cumplimiento de cada objetivo, no obstante se considera importante una educación continua que proporcione conocimientos y habilidades para apoyar al desarrollo sostenible. Por el otro lado, la implementación de la metodología TELI mostró un alto nivel de aceptación por parte de los estudiantes y demostró ser eficiente para aumentar la motivación y superación individual. Sin embargo, se considera importante continuar con la aplicación de la técnica para determinar el efecto a la largo plazo y obtener conclusiones más certeras., Esta investigación fue financiada por el Proyecto PID2020-116496RB-C22 del ministerio de Ciencia e Innovación. Marina Patricia Arrieta agradece a PIE22.0506 de la Universidad Politécnica de Madrid. Cristina Pavon agradece a la subvención Santiago Grisolía (GRISOLIAP/2019/113) de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Thermoplastic Starch Contamination in the Mechanical Recycling of High-Density Polyethylene

  • Cascales, Antonio
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] This research highlights the importance of addressing bioplastic contamination in recycling processes to ensure the quality of recycled material and move towards a more sustainable circular economy. Polyethylene (PE) is a conventional plastic commonly used in packaging for which large amounts of waste are produced; therefore, PE is generally recycled and has an established recycling process. However, the contamination of biodegradable polymers in the PE waste stream could impact recycling. This study, therefore, focuses on polyethylene (PE) that has been polluted with a commercial thermoplastic starch polymer (TPS), as both materials are used to produce plastic films and bags, so cross-contamination is very likely to occur in waste separation. To achieve this, recycled PE was blended with small quantities of the commercial TPS and processed through melt extrusion and injection molding, and it was further characterized. The results indicate that the PE-TPS blend lacks miscibility, evidenced by deteriorated microstructure and mechanical properties. In addition, the presence of the commercial TPS affects the thermal stability, oxidation, and color of the recycled PE., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of starch-rich thermoplastic polymers based on mango kernel flour and different plasticizers

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports on the development of starch-rich thermoplastic based formulations produced by using mango kernel flour, avoiding the extraction process of starch from mango kernel to produce these materials. Glycerol, sorbitol and urea at 15 wt% are used as plasticizers to obtain thermoplastic starch (TPS) formulations by extrusion and injection-moulding processes. Mechanical results show that sorbitol and urea allowed to obtain samples with tensile strength and elongation at break higher than the glycerol-plasticized sample, achieving values of 2.9 MPa of tensile strength and 42% of elongation at break at 53 % RH. These results are supported by field emission scanning electron microscopy (FESEM) micrographs, where a limited concentration of voids was observed in the samples with sorbitol and urea, indicating a better interaction between starch and the plasticizers. Thermogravimetric analysis (TGA) shows that urea and sorbitol increase the thermal stability of TPS in comparison to the glycerol-plasticized sample. Differential scanning calorimetry (DSC) and dynamic-mechanical-thermal analysis (DMTA) verify the increase in stiffness of the sorbitol and urea plasticized TPS and also illustrate an increase in the glass transition temperature of both samples in comparison to the glycerol-plasticized sample. Glass transition temperatures of 45 °C were achieved for the sample with sorbitol., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Potential of an Itaconic Acid Diester as EnvironmentallyFriendly Plasticizer for Injection-Molded Polylactide Parts

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Peydro, M. A.|||0000-0002-8503-1505
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work reports on the use of dibutyl itaconate (DBI) as an environmentallyfriendly plasticizer for polylactide (PLA) with different proportions of DBI inthe 2.5¿20 wt% (weight content) range. A co-rotating twin-screw extrusionprocess followed by injection molding is employed for the manufacturing ofthe samples. The results show that the plasticized PLA formulation with10 wt% DBI offers the most balanced overall properties, with a noticeableincrease in the elongation at break from 4.6% (neat PLA) up to 322%, with atensile modulus of 1572 MPa, and a tensile strength of 23.8 MPa. In the caseof 15 and 20 wt% DBI formulations, PLA reaches the saturation point with nomore increase in the elongation at break and a clear decrease in the tensilemodulus. DBI also decreases the glass transition temperature (Tg)from61.3°C (neat PLA) down to 23.4°C for plasticized PLA formulation containing20 wt% DBI, thus showing the high plasticization efficiency of DBI., J.I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J.G.-C. wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Also, Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the grant AICO/2021/025 funded by Generalitat Valenciana-GVA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and evaluation of novel nanofibers based on mango kernel starch obtained by electrospinning

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports on the development of fibers based on natural mango kernel starch (MKS) with diameters in the nanoscalse by means of the electrospinning technique. MKS was extracted from mango kernels and two synthetic polymers, namely polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP), were blended with MKS in order to improve its spinnability, obtaining MKS/PVA and MKS/PVP fibers with a 10 wt% of total polymer concentration. Several electrospinning conditions (voltage and flux) were tested in solutions of MKS concentrations ranging from 0 to 5 wt% for both group of fibers. The morphology of all the fibers was evaluated by field emission scanning electron microscopy (FESEM) and their topography was analysed by means of atomic force microscopy (AFM). MKS/PVA nanofibers were obtained with a diameter range from 0.146 to 0.315 ¿m, with a ¿smooth fiber concentration threshold¿ of 3 wt%, while MKS/PVP, fibers with diameters from 0.080 to 0.339 ¿m were produced, but 5 wt% MKS concentration fibers were beaded fibers, as a result of an excess in starch concentration. Finally, the roughness of the optimal fibers showed quite a similar trend to that of fiber diameter, presenting roughnessess between 80 and 343 nm., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025 for supporting this work. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Route of Valorization of Petrochemical Wastewater: Recovery of 1,3,5-Tris (4-tert-butyl-3-hydroxy-2,6-dimethyl benzyl)¿1,3,5-triazine-2,4,6-(1H,3H,5H)-trione (Cyanox 1790) and Its Subsequent Application in a PP Matrix to Improve Its Thermal Stability

  • Hernández-Fernández, Joaquin
  • Ortega-Toro, Rodrigo
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] The various chemicals in industrial wastewater can be beneficial for improving its circularity. If extraction methods are used to capture valuable components from the wastewater and then recirculate them throughout the process, the potential of the wastewater can be fully exploited. In this study, wastewater produced after the polypropylene deodorization process was evaluated. These waters remove the remains of the additives used to create the resin. With this recovery, contamination of the water bodies is avoided, and the polymer production process becomes more circular. The phenolic component was recovered by solid-phase extraction and HPLC, with a recovery rate of over 95%. FTIR and DSC were used to evaluate the purity of the extracted compound. After the phenolic compound was applied to the resin and its thermal stability was analyzed via TGA, the compound's efficacy was finally determined. The results showed that the recovered additive improves the thermal qualities of the material., This research was partially funded by the Ministry of Science, Innovation, and Universities (MICIU) project number MAT2017-84909-C2-2-R Nanolignin.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Different Porous Size of Porous Inorganic Fillers on the Encapsulation of Rosemary Essential Oil for PLA-Based Active Packaging

  • Cerdá-Gandía, Raúl
  • Agüero, Ángel
  • Arrieta, Marina Patricia
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] Essential oils are interesting active additives for packaging manufacturing as they can provide the final material with active functionalities. However, they are frequently volatile compounds and can be degraded during plastic processing. In this work Rosmarinus officinalis (RO) essential oil was encapsulated into Diatomaceous earth (DE) microparticles and into Halloysite nanotubes (HNTs) and further used to produce eco-friendly active packaging based on polylactic acid (PLA). PLA-based composites and nanocoposites films based on PLA reinforced with DE + RO and HNTs + RO, respectively, were developed by melt extrusion followed by cast-film, simulating the industrial processing conditions. As these materials are intended as active food packaging films, the obtained materials were fully characterized in terms of their mechanical, thermal and structural properties, while migration of antioxidant RO was also assessed as well as the compostability at laboratory scale level. Both DE and HNTs were able to protect the Rosmarinus officinalis (RO) from thermal degradation during processing, allowing to obtain films with antioxidant properties as demonstrated by the antioxidant assays after the materials were exposed for 10 days to a fatty food simulant. The results showed that incorporating Rosmarinus officinalis encapsulated in either DE or HNTs and the good dispersion of such particles into the PLA matrix strengthened its mechanical performance and sped up the disintegration under composting conditions of PLA, while allowing to obtain films with antioxidant properties of interest as antioxidant active food packaging materials., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) through PID-AEI project (grants PID2020-116496RB-C22 and PID2021-123753NA-C32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" by the "European Union" and TED-AEI Project (grant TED2021-129920A-C43) and Research Consolidator Project (grant CNS2022-136064) funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Angel Agueero acknowledges the Margarita Salas postdoctoral grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and characterization of thermoplastic zein biopolymers plasticized with glycerol suitable for injection molding

  • Rojas-Lema, S.
  • Arrieta, M.P.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
[EN] This research focuses on the development of high environmentally efficiency materials based on zein plasticized with glycerol, processed through extrusion and injection molding techniques. The work addresses the study of the influence of glycerol content on the processability of thermoplastic zein (TPZ), as well as its effect on mechanical and thermomechanical properties, thermal transitions, degradation, microstructure, zein-plasticizer interactions, surface appearance, and wettability. The incorporation of glycerol facilitates the processing of thermoplastic zein. To process these materials through extrusion and injection molding, a minimum amount of 15¿wt% glycerol is required, while formulations with more than 40¿wt% glycerol expel part of the plasticizer through exudation. Through these processing techniques, it is possible to obtain thermoplastic zein with a tensile strength of up to 27.9¿MPa, and elongation at break between 5¿% and 6¿%. The glass transition temperature, Tg, is significantly reduced from 43 ºC to values around 37 ºC, demonstrating the plasticizing efficiency that glycerol can exert on zein. This work demonstrates the feasibility of extrusion and injection molding processes for obtaining glycerol-plasticized thermoplastic zein (TPZ), expanding the possibilities of zein use as a potential substitute of some petroleum-derived commodity plastics., This research is a part of the grant PID2020 116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. R. Balart wants to thank Vicerrectorado de Investigacion¿ at Universitat Politecnica de Valencia (UPV) for partial funding of this research through the program Funds for First Research Projects (PAID06 23). Microscopy services at UPV are acknowledged for their help in using and collecting FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Macroscopic Interpretation of the Correlation between Electrical Percolation and Mechanical Properties of Poly-(Ethylene Vinyl Acetate)/Zn Composites

  • Agrisuelas, Jerónimo
  • García-Jareño, José J.
  • Vicente, Francisco
  • Balart, Rafael|||0000-0001-5670-7126
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Elastic composites were prepared using a procedure involving hot plates and zinc powder that was directly dispersed into an EVA matrix. The correlation between the zinc content and the conductive properties of the material was studied via impedance spectroscopy, the thermal properties of the material were studied via differential calorimetry and the mechanical properties of the composites were studied via tensile strength curves, representing an important advancement in the characterization of this type of composite material. The composites¿ tensile strength and elongation at break decrease with the addition of filler since zinc particles act as stress-concentrating centres, while the composites¿ hardness and Young¿s modulus increase because of an increase in the stiffness of the material. The AC perturbation across the EVA/Zn composites was characterized using an RC parallel equivalent circuit that allowed us to easily measure their resistivity (¿p) and permittivity (¿ p). The dependence of these electrical magnitudes on the zinc content is correlated with their mechanical properties across the characteristic time constant ¿p = ¿p·¿ p of this equivalent circuit. The dependence of the mechanical and electrical magnitudes on the zinc content is consistent with the formation of percolation clusters. The addition of graphite particles increases their potential performance. Three possible mechanisms for the electrical transport of the ac-perturbation across the EVA/Zn composites have been identified. Chemical corrosion in acid media causes the loss of zinc surface particles, but their bulk physical properties practically remain constant., Spanish E3TECH-PLUS Research Network (RED2022-134552-T), MICINN/AEI. This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/5 01100011033 and the European Union Next Generation EU /PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Polylactic Acid Properties with Graphene Nanoplatelets and Carbon Black Nanoparticles: A Study of the Electrical and Mechanical Characterization of 3D-Printed and Injection-Molded Samples

  • Giner-Grau, Salvador
  • Pascual, Javier
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] This study investigates the enhancement of polylactic acid (PLA) properties through the incorporation of graphene nanoplatelets (GNPs) and carbon black (CB) for applications in 3D printing and injection molding. The research reveals that GNPs and CB improve the electrical conductivity of PLA, although conductivity remains within the insulating range, even with up to 10% wt of nanoadditives. Mechanical characterization shows that nanoparticle addition decreases tensile strength due to stress concentration effects, while dispersants like polyethylene glycol enhance ductility and flexibility. This study compares the properties of materials processed by injection molding and 3D printing, noting that injection molding yields isotropic properties, resulting in better mechanical properties. Thermal analysis indicates that GNPs and CB influence the crystallization behavior of PLA with small changes in the melting behavior. Dynamic Mechanical Thermal Analysis (DMTA) results show how the glass transition temperature and crystallization behavior fluctuate. Overall, the incorporation of nanoadditives into PLA holds potential for enhanced performance in specific applications, though achieving optimal conductivity, mechanical strength, and thermal properties requires careful optimization of nanoparticle type, concentration, and dispersion methods., This research was funded by Ministerio de Ciencia, Innovacion y Universidades grant numbers TED2021-131762A-I00 and PID2020-116496RB-C22. Also this research was funded by Generalitat Valenciana grant numbers AICO/2021/025, CIGE/2021/094, and CIGE/2023/46. Also this research was funded by Instituto Valenciano de Competitividad Empresarial grant numbers IMAMCI/2019/1 and IMAMCI/2021/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manufacturing and Characterization of High-Density Polyethylene Composites with Active Fillers from Persimmon Peel Flour with Improved Antioxidant Activity and Hydrophobicity

  • Rojas-Lema, Sandra Paola
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] The potential of persimmon peel waste (PPF) as renewable active filler in biobased polyethylene composites, with improved antioxidant properties and resistance to water uptake is shown. To improve the interaction between the hydrophilic biofiller and the highly hydrophobic matrix, several compatibilization approaches are assessed. The first approach consists of using a polyethylene grafted copolymer with maleic anhydride (PE-g-MA). The second approach consists of modifying the PPF surface with two treatments before compounding with Bio-HDPE. The first consists on conventional silanization with (3-glycidyloxypropyl)trimethoxysilane, while the second consists on esterification with palmitoyl chloride. The results show an improvement of the matrix/biofiller interaction, as observed by field emission scanning electron microscopy (FESEM), leading to an increase in Young¿s modulus of 10% in composites compatibilized with PE-g-MA, and silanized PPF compared to composites without compatibilizer and no surface treatment on PPF. Interestingly, treatment with palmitoyl chloride leads to an increase in the hydrophobic behavior of composites keeping the water contact angle virtually constant at 128°. This effect is also reflected in a clear decrease in water absorption capacity of only 0.3 wt% over 9 weeks. Finally, PPF increases stabilization against oxidation, improving the oxidation induction time from 4.8 min (Bio-HDPE) to 82.5 min for composites with silanized PPF., The authors want to thank the Spanish Ministry of Science and Innovation, grant number MEN PID2020-116496RB-C22 for funding this research. D.L. wants to thank UPV for the grant received though the PAID-01-18 program. S.R.-L. is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). J.G.-C. wants to thank Universitat Politècnica de València for his FPI grant from (SP20200080). J.I.-M. thanks the Spanish Ministry of Science, Innovation and Universities for his FPU grant (FPU19/01759). Microscopy services at UPV are acknowledged for their help in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of bacterial cellulose obtained from kombucha fermentation in spent coffee grounds for active composites based on PLA and maleinized linseed oil

  • Agüero, Ángel
  • Arrieta, Marina P.
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Spent coffee grounds have been successfully used as an alternative infusion for kombucha fermentation (spent coffee kombucha, SCK). The obtained by-product of this fermentation consists of a kombucha bacterial cellulose (KBC) matrix. The bacterial cellulose was also fermented in pristine coffee grounds infusion for comparison (coffee kombucha, CK). The bacterial cellulose obtained from both infusion fermentations (SCK and CK) was used as filler in PLA matrix plasticized with a 5 wt% of maleinized linseed oil (MLO). Two different content of SCK and CK (3 and 5 wt%) were introduced in the PLA-MLO matrix to produce a film using a conical twin-screw microextruder to simulate the industrial processing conditions. The resultant bio-based films were studied in tern of morphological, tensile, and thermal properties, UV¿visible absorption, water vapor permeability, and wettability. The antioxidant activity of the obtained materials was tested in contact with a fatty food simulant demonstrating antioxidant activity. In addition, disintegrability tests under composting conditions confirmed the compostable character of all films. The obtained results suggest the potential applicability of these bio-based materials obtained by the revaluation of HoReCa waste in antioxidant materials with interest as food packaging or for agricultural uses., This research contributes to "The Circular and Regenerative Campus" community from the EELISA European University Alliance. Authors gratefully acknowledge Alcoin for kindly providing the coffee waste recovered at the University canteen of the Industrial Engineering School of the Polytechnic University of Madrid (ETSII-UPM). This research was funded by the Spanish Ministry of Science and Innovation (MICINN) through PID-AEI project (grants PID2020-116496RB-C22 and PID2021-123753NA-C32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" by the "Euro-pean Union" and TED-AEI Projects (grants TED2021-129920A-C43 and TED2021-131762A-I00) and "Consolidaci'on Investigadora" Project (grant CNS2022-136064 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". It was also funded by Comunidad de Madrid-CAM ("Ayudas de Estimulo a la Investigaci'on de J'ovenes Doctores de la Universidad Polite'cnica de Madrid", APOYO-JOVENES-21-VUI9G6-56-I7GABQ) and Generalitat Valenciana-GVA grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Meanwhile, Ph.D. 'A. Agueero and Ph.D. D. Lascano acknowledge the Margarita Salas postdoctoral grants from the Ministerio de Uni-versidades, Spain, funded by the European Union-Next Generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the mechanical properties of polylactide composites with jute reinforcements

  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Montanes, Nestor|||0000-0001-6070-127X
  • Cristobal Aljaro
  • Eduardo Fages
  • Sandra Rojas-Lema
[EN] Concern has arisen in recent years over the excessive use of oil-based materials, making the development of new materials with a low environmental impact all the more urgent. In this study, environmentally friendly composites were obtained using a thermoplastic polylactide (PLA) matrix with jute fibers (fabrics and non-woven mats) as reinforcement. PLA/jute biocomposites were manufactured by thermocompression. The effect of the amount of jute fiber reinforcement (in the 30¿50¿wt.% range) on the tensile and flexural properties of these composites was analyzed, and the fiber¿matrix interaction was assessed by scanning electron microscopy. The results show that thermocompression molding is a simple technique for obtaining high-environmental-efficiency biocomposites with high reinforcement loadings (up to 50¿wt.%). As expected, the tensile properties are directly related to the amount of fiber loading, as well as the directionality of these fibers in the composite. Mechanical performance is also highly dependent on fiber¿matrix interactions. These biocomposites could be attractive as lightweight interior panels in the automotive industry, cases/covers in electric/electronic applications, and turbine blade components in the wind energy industry, among others, due to their balanced mechanical properties and the rather complex shapes that could be obtained by thermocompression., This research is part of grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 and grant AICO/2021/025 funded by Generalitat Valenciana (GVA). S. Rojas-Lema is a recipient of a Santiago Grisolía grant from GVA (GRISOLIAP/2019/ 132). D. Lascano wants to thank Universitat Politècnica de València (UPV) for the grant received through the PAID-01-18 program. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in Your Future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Presence of Poly(butylene succinate) in the Poly(ethylene terephthalate) Recycling Process

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldás, Miguel
  • Bertomeu, David
[EN] Poly(butylene succinate) (PBS) is one of the contaminants in the Poly(ethylene terephthalate) (PET) recycling process. It is known that high contents of PBS in PET significantly reduce PET properties, but the effect of low contents on PET has yet to be studied. This work studied the influence of low contents of PBS on recycled PET. Five formulations of PBS in PET were prepared, and the properties of relative affinity, mechanical, thermal, and disintegration under composting conditions were assessed. The solubility parameter indicated that PET and PBS are miscible. However, FESEM images show slight marks of immiscibility, and the mechanical characterization results showed that PBS, even in low contents, reduced the mechanical properties of recycled PET, which proves that the materials are not miscible in the studied contents. The DSC results indicated that PBS could not be quickly detected in PET. However, its presence can be inferred by the reduction in PET crystallization degree. Finally, the presence of PBS up to 15 wt.% does neither affect the disintegration under composting conditions nor the thermal stability of recycled PET. The drop in mechanical properties shows that PBS must be removed from the PET waste stream to preserve the quality of the material., This research is a part of grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/ 501100011033. C.P. acknowledges the Santiago Grisolía Fellowship (GRISOLIAP/2019/113) from Generalitat Valenciana. The Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing the images
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of Cinnamic Acid Derivatives as Alternative Plasticizers for Improved Ductility of Polyvinyl Chloride Films

  • Barandiaran, Alejandro
  • Moreno-García, Virginia
  • Montanes, Nestor|||0000-0001-6070-127X
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
  • Sellés, M.A.|||0000-0002-0784-5757
[EN] This study investigates the viability of cinnamic acid derivatives as alternative plasticizers for polyvinyl chloride (PVC) films by addressing concerns about conventional phthalate-based options that pose health and environmental risks. By theoretical modeling, this research evaluates the compatibility between various cinnamic acid-based plasticizers and the PVC matrix, which suggests their potential effectiveness. Additionally, the incorporation of these plasticizers notably enhances the tensile properties of PVC films, particularly in terms of ductility and elongation at break by surpassing the neat PVC. Moreover, cinnamic acid-based plasticizers induce a drop in the glass transition temperature and storage modulus by, thereby, enhancing flexibility and reducing brittleness in the material. Although a slight reduction in the onset degradation temperature is observed, it does not impede the industrial processing of PVC plastisols at temperatures up to 190 °C. Optically, plasticized films exhibit high transparency with minimal UV and visible light absorption, which renders them suitable for applications necessitating clarity. The water vapor transmission rate analysis indicates increased permeability, influenced by molecular volumes. Atomic force microscopy reveals a compacted, homogeneous surface structure in most plasticized films, which signifies improved film quality. Thus, utilizing cinnamic acid derivatives as PVC plasticizers offers substantial mechanical and structural benefits, while compatibility ensures effective integration by contributing to environmentally sustainable PVC formulations with enhanced performance., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union ¿NextGenerationEU¿/PRTR. Authors also thank Generalitat Valenciana¿GVA for funding this research through grant numbers AICO/2021/025 and CIGE/2021/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of the mechanical properties of PLA/coffee residue biocomposites from the liquor industry, Mejora de las propiedades mecánicas de biocompuetos de PLA/residuo de café procedente de la industria licorera

  • Terroba Delicado, Enrique
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Montanes, Nestor|||0000-0001-6070-127X
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
[EN] This work deals with the revaluation of coffee bean residues from the coffee liquor industry with the aim of developing eco-efficient composite materials with a polymeric matrix of polylactic acid (PLA). The coffee residue is incorporated in a proportion of 20% to the PLA by extrusion. After a grinding process, they are processed by injection to obtain standardized test pieces for their characterization. In order to improve the mechanical properties, as well as the toughness and compatibility between the biopolyester and the lignocellulosic particles of the coffee residue, two oligomers of lactic acid (OLA2 and OLA2mal functionalized with maleic anhydride) are added, together with the particles of the coffee residue during the extrusion process. These "Green composites" show that the incorporation of coffee residue particles from the manufacture of coffee liquor considerably increases the ductility of the samples analyzed by practically 280% due to their high content of oils present in the lignocellulosic residue. In addition, the incorporation of the OLA2 and OLA2mal oligomers contribute to improve the tensile strength of the composite materials studied, by 35% and 60%, respectively. These interesting results show the wide possibilities of this eco-efficient and sustainable material made of PLA and coffee residue. These are biodegradable materials, respectful of the environment and that allow the revaluation of coffee bean residues from the agri-food industry such as coffee liquor., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the grant AICO/2021/025 funded by Generalitat Valenciana-GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation and Characterization of New Bioplastics Based on Polybutylene Succinate (PBS)

  • Barrino, Federico
  • Schiraldi, Chiara
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
[EN] Sea and environmental pollution due to microplastics are global problems that in recent years have attracted particular interest in the scientific community. The increase in the world population and the consequent consumerism of non-reusable materials are amplifying these problems. In this manuscript, we present novel bioplastics, which are completely biodegradable, for their potential use in food packaging, to replace fossil-fuel-derived plastic films and slow food degradation due to oxidative processes or microbial contamination. In this study, thin films based on polybutylene succinate (PBS) were prepared to reduce pollution, and different percentages by weight (1, 2 and 3 wt%) of extra virgin olive oil (EVO) and coconut oil (CO) were included to improve the chemico-physical properties of the polymer and possibly improve the functionality of the films in terms of prolonged food preservation. Attenuated total reflectance Fourier transform infrared (ATR/FTIR) spectroscopy was used to evaluate the interactions between the polymer and the oil. Furthermore, the mechanical properties and thermal behavior of the films were evaluated as a function of the oil content. A scanning electron microscopy (SEM) micrograph showed the surface morphology and the thickness of the materials. Finally, apple and kiwi were selected for a food-contact test, and the wrapped sliced fruit was monitored and evaluated for 12 days to macroscopically evaluate the oxidative process and/or eventually occurring contamination. The films were shown to reduce the browning of sliced fruit due to oxidation, and no molds were evidenced up to 10/12 days of observation with the addition of PBS, with 3 wt% of EVO achieving the best outcomes., This research was funded by MCIN/AEI/10.13039/501100011033 through PID-AEI Project (grant PID2021-123753NA-C33 and PID2020-116496RB-C22), TED-AEI Project (grants TED2021-129920A-C43), and, as appropriate, by ERDF: A way of making Europe , by the European Union , or by the European Union NextGenerationEU/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Autocatalytic influence of different levels of arsine on the thermal stability and pyrolysis of polypropylene

  • Hernández-Fernández, Joaquín
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] In this article, the pyrolysis and thermo-degradation of 11 virgin-polypropylene (virgin-PP) with different levels of arsenic in its polymer matrix, was carried out in a discontinuous quartz reactor at 500 degrees C. To quantify arsine (AsH3), 4 points were sampled during the PP synthesis process and a methodology was applied by GC with 4 detectors, which simultaneously and with a single injection allowed to quantify multiple components. AsH3 in propylene varied between 0.05 and 4.73 ppm and arsenic in virgin-PP residues between 0.001 and 4.32 ppm for PPO and PP10. These generated an increase in the melt flow index from 3.0 to 24.51 and maintained a direct relationship with an R-2 of 0.9993. The origin of thermo-oxidative degradation and the beginnings of virgin-PP pyrolysis are explained by the formation to aldehyde, ketone, alcohol, carboxylic acid functional groups, CO and CO2. These species caused TG and DTG curves to have atypical behavior for PP. For example, PP10 with an arsenic content of 4.32 ppm presented 3 degradation peaks at 80, 90 and 200 degrees C with a mass loss ratio of 22%, 18% and 55% degrees C-1 respectively. During pyrolysis the highest percentage of alkanes was found in PPO with an average value of 62.4%, and the lowest values were found in PP8 to PP10, with oscillations between 0% and 1.4%. The total concentration of oxidized species for PPO to PP10 was 2.26%, 32.7%, 43.1%, 50.9%, 59.3%, 66.2%, 75.0%, 83.0%, 89.1% and 97.5% respectively. In an O-2 atmosphere ketones and carboxylic acids were only identified in PPO to PP5. CO2 concentrations in PP5 to PP10 were of 100%.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of Poly(lactide) Ductile Properties by Plasticization with Biobased Tartaric Acid Ester

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Moreno, Virginia
[EN] Diethyl l-tartrate (DET) is used as a biobased plasticizer for poly(lactide) (PLA) formulations with improved ductile properties without compromising biodegradation. Different weight percentages (wt.%) of DET in the 0¿50 wt.% range are added to PLA by melt compounding and subsequently processed by injection molding. The effect of wt.% DET on mechanical, thermal, thermo-mechanical, morphology, biodegradation, and crystallinity is studied. Addition of 20 wt.% DET leads to a noticeable increase in elongation at break up to values of 567%, which is quite an interesting result considering the extreme brittleness of PLA. These results are verified by field emission scanning electron microscopy (FESEM) images, where filament-like structures are observed, indicative of an effective plasticization. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) show that the glass transition temperature of PLA is drastically decreased down to values of 23 °C for the sample with the highest amount of DET (50 wt.%), thus increasing its ductility and processability. Fourier-transformed infrared spectroscopy (FTIR) spectra show that there exists chemical interactions between PLA and DET. Finally, the biodegradability analysis proves that the developed blends are fully biodegradable, achieving complete disintegration after 49 days. It is observed that DET enhanced the disintegration rate of PLA., This research was a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. The authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025 and CIGE/2021/094 for supporting this work. J.G.-C. wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J.I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. V.M. wants to thank Generalitat Valenciana - GVA for funding a postdoc position through the APOSTD program co-funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo y caracterización de polímeros de alto rendimiento medioambiental derivados de residuos agroindustriales y aditivos de origen renovable

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[ES] La presente tesis doctoral tiene como principal objetivo el desarrollo de materiales poliméricos que sean respetuosos con el medio ambiente y favorezcan modelos de economía circular, centrando las líneas de investigación en el reaprovechamiento de residuos de la industria del mango y en la utilización de ácido poliláctico (PLA) como principal matriz polimérica. Para ello se emplean diferentes técnicas de procesado como el electrospinning, la extrusión, la inyección o la producción de films por disolución. Además, se plantea la utilización de diferentes aditivos como plastificantes y cargas lignocelulósicas de origen renovable para mejorar las propiedades de estos materiales sin comprometer su alto potencial medioambiental. El primer bloque de la tesis centra sus esfuerzos en el reaprovechamiento de diferentes residuos del mango (uno de los cultivos más populares del mundo), como la piel y el kernel, para desarrollar diferentes materiales con un gran contenido natural. Dentro de los estudios realizados en este bloque se incluye la extracción de almidón a partir del kernel de mango para la posterior fabricación de nanofibras por electrospinning, con gran aplicación en el sector médico. Otros estudios realizados proponen la combinación de matrices poliméricas como el biopolipropileno y el PLA, en combinación con harina de piel de mango y harina de hueso de mango, respectivamente, mediante procesos de extrusión, extrusión reactiva (REX) e inyección. En el caso del biopolipropileno se utilizan además agentes compatibilizantes basados en ácido itacónico para aumentar la adhesión entre las partículas lignocelulósicas de la piel del mango con la matriz polimérica, la cual es altamente apolar. Por otro lado, a las formulaciones de PLA y harina de hueso de mango se le añaden plastificantes como la triacetina y la tributirina para aumentar las propiedades dúctiles del PLA. Un cuarto estudio se enfoca en la producción de films de glicerol con harina de hueso de mango, rica en almidón, para observar cómo afecta el tamaño de partícula de la harina sobre las propiedades de los films. Por último, se propone el desarrollo de materiales termoplásticos ricos en almidón utilizando harina de kernel de mango en combinación con diferentes plastificantes como glicerol, sorbitol y urea. Estos materiales ricos en almidón son procesados por extrusión e inyección y son completamente biodegradables y de origen natural. El segundo y último bloque de la tesis está enfocado a la utilización del ácido poliláctico obtenido de fuentes renovables en procesos de extrusión e inyección. Este poliéster es un polímero biodegradable cuya principal desventaja es su gran fragilidad. Por ello, se han empleado diferentes tipos de plastificantes naturales para incrementar las propiedades dúctiles del PLA. En un primer trabajo, se combina el PLA con α-terpinil acetato, un plastificante de origen renovable. Además, se añade piel de mandarina molida como carga natural para evaluar si este plastificante es capaz de aumentar la ductilidad de mezclas de PLA con cargas lignocelulósicas, obtenido resultados muy positivos. Un segundo trabajo plantea la combinación de PLA con dietil-L-tartrato, un plastificante obtenido del ácido tartárico, encontrado en la uva y el tamarindo, obteniendo elongaciones de más de un 300%. Por último, dos estudios más plantean la combinación de PLA con terpenoides, más concretamente ésteres de geranilo y linalilo. En este sentido, uno de los trabajos se centra en variar la proporción de acetato de linalilo y acetato de geranilo en las composiciones, mientras que el otro trabajo evalúa como afecta la longitud de cadena de los ésteres de geranilo a la plastificación del PLA. Todos los plastificantes utilizados en este bloque ofrecieron resultados muy prometedores, con alargamientos a la rotura superiores al 200% en materiales completamente naturales y biodegradables con gran aplicación en el sector alimentario y del envase y embalaje., [CA] La present tesi doctoral té com a principal objectiu el desenvolupament de materials polimèrics que siguen respectuosos amb el medi ambient i afavorisquen models d'economia circular, centrant les línies d'investigació en el reaprofitament de residus de la indústria del mango i en la utilització d'àcid polilàctic (PLA) com a principal matriu polimèrica. Per a això s'empren diferents tècniques de processament com l'electrospinning, l'extrusió, la injecció o la producció de films per dissolució. A més, es planteja la utilització de diferents additius com a plastificants i càrregues lignocelulòsiques d'origen renovable per a millorar les propietats d'aquests materials sense comprometre el seu alt potencial mediambiental. El primer bloc de la tesi centra els seus esforços en el reaprofitament de diferents residus del mango (un dels cultius més populars del món), com la pell i el kernel, per a desenvolupar diferents materials amb un gran contingut natural. Dins dels estudis realitzats en aquest bloc s'inclou l'extracció de midó a partir del kernel de mango per a la posterior fabricació de nanofibers per electrospinning, amb gran aplicació en el sector mèdic. Altres estudis realitzats proposen la combinació de matrius polimèriques com el biopolipropilè i el PLA, en combinació amb farina de pell de mango i farina d'os de mango, respectivament, mitjançant processos d'extrusió, extrusió reactiva (REX) i injecció. En el cas del biopolipropilè s'utilitzen a més agents compatibilitzants basats en àcid itacònic per a augmentar l'adhesió entre les partícules lignocelulòsiques de la pell del mango amb la matriu polimèrica, la qual és altament apolar. D'altra banda, a les formulacions de PLA i farina d'os de mango se li afigen plastificants com la triacetina i la tributirina per a augmentar les propietats dúctils del PLA. Un quart estudi s'enfoca en la producció de films de glicerol amb farina d'os de mango, rica en midó, per a observar com afecta la grandària de partícula de la farina sobre les propietats dels films. Finalment, es proposa el desenvolupament de materials termoplàstics rics en midó utilitzant farina de kernel de mango en combinació amb diferents plastificants com glicerol, sorbitol i urea. Aquests materials rics en midó són processats per extrusió i injecció i són completament biodegradables i d'origen natural. El segon i últim bloc de la tesi està enfocat a la utilització de l'àcid polilàctic obtingut de fonts renovables en processos d'extrusió i injecció. Aquest polièster és un polímer biodegradable el principal desavantatge del qual és la seua gran fragilitat. Per això, s'han emprat diferents tipus de plastificants naturals per a incrementar les propietats dúctils del PLA. En un primer treball, es combina el PLA amb α-terpinil acetat, un plastificant d'origen renovable. A més, s'afig pell de mandarina molta com a càrrega natural per a avaluar si aquest plastificant és capaç d'augmentar la ductilitat de mescles de PLA amb càrregues lignocelulòsiques, obtenint resultats molt positius. Un segon treball planteja la combinació de PLA amb dietil-L-tartrat, un plastificant obtingut de l'àcid tartàric, trobat en el raïm i el tamarinde, obtenint elongacions de més d'un 300%. Finalment, dos estudis més plantegen la combinació de PLA amb terpenoids, més concretament èsters de geranil i linalil. En aquest sentit, un dels treballs se centra en variar la proporció d'acetat de linalil i acetat de geranil en les composicions, mentre que l'altre treball avalua com afecta la longitud de cadena dels èsters de geranil a la plastificació del PLA. Tots els plastificants utilitzats en aquest bloc van oferir resultats molt prometedors, amb allargaments al trencament superiors al 200% en materials completament naturals i biodegradables amb gran aplicació en el sector alimentari i de l'envàs i embalatge., [EN] The present doctoral thesis has as its main objective the development of polymeric materials that are environmentally friendly and promote circular economy models, focusing research on the reuse of waste from the mango industry and the use of polylactic acid (PLA) as the main polymer matrix. Various processing techniques such as electrospinning, extrusion, injection, or cast film are employed for this purpose. In addition, the use of different additives such as plasticizers and lignocellulosic fillers of renewable origin is proposed to improve the properties of these materials without compromising their high environmental potential. The first part of the thesis focuses on the reuse of various mango waste products (one of the most popular crops in the world), such as peel and kernel, to develop different materials with a high natural content. Studies in this section include the extraction of starch from mango kernels for the subsequent production of nanofibers by electrospinning, which have significant applications in the medical sector. Other studies propose the combination of polymeric matrices such as biopolypropylene and PLA, in combination with mango peel flour and mango kernel flour, respectively, through extrusion, reactive extrusion (REX), and injection processes. In the case of biopolypropylene, compatibilizing agents based on itaconic acid are also used to increase the adhesion between lignocellulosic particles from mango peel and the highly apolar polymer matrix. On the other hand, PLA formulations with mango kernel flour are supplemented with plasticizers such as triacetin and tributyrin to enhance the ductile properties of PLA. A fourth study focuses on the production of glycerol films with mango kernel flour, rich in starch, to observe how the particle size of the flour affects the film properties. Finally, the development of starch-rich thermoplastic materials is proposed using mango kernel flour in combination with different plasticizers such as glycerol, sorbitol, and urea. These starch-rich materials are processed by extrusion and injection and are completely biodegradable and of natural origin. The second and final part of the thesis is focused on the use of polylactic acid obtained from renewable sources in extrusion and injection processes. This biodegradable polyester has the main disadvantage of being very brittle. Therefore, different types of natural plasticizers have been used to increase the ductile properties of PLA. In the first study, PLA is combined with α-terpinyl acetate, a renewable plasticizer. In addition, ground tangerine peel is added as a natural filler to evaluate if this plasticizer can increase the ductility of PLA blends with lignocellulosic fillers, yielding very positive results. A second study proposes the combination of PLA with diethyl-L-tartrate, a plasticizer obtained from tartaric acid, found in grapes and tamarind, resulting in elongations of more than 300%. Finally, two more studies propose the combination of PLA with terpenoids, specifically geranyl and linalyl esters. In this regard, one of the works focuses on varying the proportion of linalyl acetate and geranyl acetate in the compositions, while the other study evaluates how the chain length of geranyl esters affects PLA plasticization. All the plasticizers used in this section offered very promising results, with elongations at break exceeding 200% in completely natural and biodegradable materials with significant applications in the food and packaging sectors., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Commercial Grade of P(3HB-co-3HHX) Final Properties Adjustment by the Modification of Cooling Conditions in the Injection Molding and Ageing Process

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Peydro, M. A.|||0000-0002-8503-1505
  • Sellés, M.A.|||0000-0002-0784-5757
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) is a polymer obtained bybacterial fermentation that emerges as an alternative to polymers ofpetrochemical origin. The complex crystallization kinetics that occurs over 15days after melting, known as ageing, limits its industrial application. Duringthe aging process, there is a change of the degree of crystallinity, which has ane¿ect on the chemical structure of the material. Additionally, changes in themechanical properties, colorimetry, and dimensional shrinkage are observed.Di¿erent material properties are observed depending on the coolingconditions employed. For the ageing process, two di¿erent conditions areconsidered: ageing at room temperature and annealing at high temperature(60 °C)., This research was a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762AI00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. This work was also funded with Aid for First Research Projects (PAID-06-22), the Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. I.-M. wants to thank FPU grant FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF: Investing in Your Future. J.G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF: Investing in Your Future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Optimización de las propiedades de tenacidad e impacto de formulaciones de ácido poliláctico (PLA), mediante mezclas con polímeros flexibles y optimización de los sistemas de compatibilización

  • Tejada Oliveros, Ramón
[ES] El objetivo de esta tesis doctoral radica en el estudio y desarrollo de materiales basados en ácido poliláctico (PLA), con la finalidad de mejorar sus propiedades para su aplicabilidad en diversos sectores industriales. Este estudio se enfoca en la modificación de la fragilidad y rigidez inherentes al PLA mediante la incorporación de diferentes materiales, como plastificantes derivados de aceites vegetales epoxidado y maleinizado del aceite de linaza denominado MLO. Además, se investiga la creación de mezclas binarias con polímeros de mayor ductilidad, como el policarbonato (PC) y el estireno-b-(etileno-ran-butileno)-b-estireno (SEBS), se explora la inclusión de oligómeros de ácido láctico (OLA) y monoterpenos como estrategias para mejorar las propiedades del PLA. Estas investigaciones buscan proporcionar soluciones avanzadas y sostenibles para diversas aplicaciones industriales que demandan materiales con características mejoradas. En el contexto actual de la industria de los polímeros, la búsqueda de materiales sostenibles y respetuosos con el medio ambiente ha adquirido un protagonismo destacado. Esta creciente conciencia ambiental ha impulsado una profunda investigación y desarrollo de soluciones innovadoras que cumplan con los estándares de sostenibilidad y, al mismo tiempo, ofrezcan propiedades y rendimientos excepcionales. Dentro de este marco, la presente investigación se sumerge en el estudio y evaluación de alternativas prometedoras con las que mejorar la fragilidad y rigidez inherentes al PLA mediante la incorporación de diferentes materiales, como plastificantes, oligómeros, compatibilizantes u otros polímeros en mezclas binarias. El primer ámbito de estudio de esta investigación se centra en la incorporación de MLO como un agente compatibilizador en mezclas compuestas por PLA y SEBS. Los resultados de este estudio arrojan evidencia sólida de que el MLO supera de manera significativa a los tradicionales compatibilizadores derivados del petróleo. Se logra un incremento notable en la resistencia al impacto de estas mezclas, lo que es esencial en aplicaciones de envasado que requieren una protección adecuada de los productos contenidos. Además, se destaca que la adición de MLO conlleva una ligera disminución de la temperatura de transición vítrea (Tg) en la fase rica en PLA. Este efecto puede ser beneficioso en términos de flexibilidad, lo que resulta especialmente relevante en el envasado de productos que necesitan adaptabilidad y resistencia a condiciones variables. El segundo plano de investigación se enfoca en la comparación exhaustiva entre compatibilizadores de origen natural y aquellos de procedencia petroquímica en mezclas de PLA y PC. Este análisis confirma que los compatibilizadores naturales, incluyendo MLO y el aceite de linaza epoxidado (ELO), presentan ventajas notables en términos de resistencia al impacto sin comprometer la estabilidad térmica. Este hallazgo subraya la viabilidad y sostenibilidad de los compatibilizadores biobasados en aplicaciones específicas del envasado. Además, se aborda en el concepto de extrusión reactiva (REX) como una estrategia efectiva para potenciar la tenacidad de las mezclas de PLA. Tanto la inclusión de OLA y MLO durante el proceso de REX producen resultados altamente prometedores. Esto incluye un notable aumento en la resistencia al impacto, un atributo crítico en aplicaciones de envasado donde la integridad del producto es esencial. Es importante destacar que la adición de MLO, en particular, resulta en una transparencia sobresaliente, un factor que potencia aún más su idoneidad para aplicaciones de envasado de alimentos. Por último, se profundiza en el estudio de los monoterpenoides no esterificados y su impacto en el PLA. Estos compuestos, entre los que se destacan la carvona, el citral, el citronelal y el eucaliptol, han demostrado ser capaces de mejorar significativamente la ductilidad del PLA sin afectar de manera sustancial su transparencia. Este hallazgo adquiere, [CA] L'objectiu d'aquesta tesi doctoral radica en l'estudi i desenvolupament de materials basats en àcid polilàctic (PLA), amb la finalitat de millorar les seues propietats per a la seua aplicabilitat en diversos sectors industrials. Aquest estudi s'enfoca en la modificació de la fragilitat i rigidesa inherents al PLA mitjançant la incorporació de diferents materials, com a plastificants derivats d'olis vegetals epoxidats i maleinizats de l'oli de llinosa denominat MLO. A més, s'investiga la creació de mescles binàries amb polímers de major ductilitat, com el policarbonat (PC) i el estiré-b-(etilé-ran-butilé)-b-estiré (SEBS), s'explora la inclusió de oligomers d'àcid làctic (OLA) i monoterpens com a estratègies per a millorar les propietats del PLA. Aquestes investigacions busquen proporcionar solucions avançades i sostenibles per a diverses aplicacions industrials que demanden materials amb característiques millorades. En el context actual de la indústria dels polímers, la cerca de materials sostenibles i respectuosos amb el medi ambient ha adquirit un protagonisme destacat. Aquesta creixent consciència ambiental ha impulsat una profunda recerca i desenvolupament de solucions innovadores que complisquen amb els estàndards de sostenibilitat i, al mateix temps, oferisquen propietats i rendiment excepcionals. Dins d'aquest marc, la present investigació se submergeix en l'estudi i avaluació d'alternatives prometedores amb les quals millorar la fragilitat i rigidesa inherents al PLA mitjançant la incorporació de diferents materials, com a plastificants, oligómers, compatibilitzants o altres polímers en mescles binàries. El primer àmbit d'estudi d'aquesta investigació se centra en la incorporació de MLO com un agent compatibilitzador en mescles compostes per àcid poliláctic (PLA) i poliestiré-b-(etilé-ran-*butilé)-b-estiré (*SEBS). Els resultats d'aquest estudi llancen evidència sòlida que MLO supera de manera significativa als tradicionals compatibilitzadors derivats del petroli. S'aconsegueix un increment notable en la resistència a l'impacte d'aquestes mescles, la qual cosa és essencial en aplicacions d'envasament que requereixen una protecció adequada dels productes continguts. A més, es destaca que l'addició del MLO comporta una lleugera disminució de la temperatura de transició vítria (Tg) en la fase rica en PLA. Aquest efecte pot ser beneficiós en termes de flexibilitat, la qual cosa resulta especialment rellevant en l'envasament de productes que necessiten adaptabilitat i resistència a condicions variables. El segon pla d'investigació s'enfoca en la comparació exhaustiva entre compatibilitzadors d'origen natural i aquells de procedència petroquímica en mescles de PLA i policarbonat (PC). Aquesta anàlisi confirma que els compatibilizadors naturals, incloent el MLO i l'oli de llinosa epoxidat (ELO), presenten avantatges notables en termes de resistència a l'impacte sense comprometre l'estabilitat tèrmica. Aquesta troballa subratlla la viabilitat i sostenibilitat dels compatibilizadors de base biològica en aplicacions específiques de l'envasament. A més, s'aprofundeix en el concepte d'extrusió reactiva com una estratègia efectiva per a potenciar la tenacitat de les mescles de PLA. Tant la inclusió de oligómers d'àcid làctic (OLA) com l'aplicació de peròxid de dicumil (DCP) i MLO durant el procés d'extrusió reactiva produeixen resultats altament prometedors. Això inclou un notable augment en la resistència a l'impacte, un atribut crític en aplicacions d'envasament on la integritat del producte és essencial. És important destacar que l'addició de MLO, en particular, resulta en una transparència excel·lent, un factor que potencia encara més la seua idoneïtat per a aplicacions d'envasament d'aliments. Finalment, s'aprofundeix en l'estudi dels monoterpenoides no esterificats i el seu impacte en la PLA. Aquests compostos, entre els quals es destaquen la carvona, el citral, el citronelal i el eucaliptol, han demostrat ser capaços de millo, [EN] The objective of this doctoral thesis is the study and development of materials based on polylactic acid (PLA), with the aim of improving its properties for its applicability in various industrial sectors. This study focuses on the modification of the inherent brittleness and stiffness of PLA by incorporating different materials, such as plasticizers derived from epoxidized vegetable oils and maleinized linseed oil called MLO. In addition, the creation of binary blends with higher ductility polymers such as polycarbonate (PC) and polystyrene-b-(ethylene-ran-butylene)-b-styrene (SEBS) is investigated, the inclusion of lactic acid oligomers (OLA) and monoterpenes are explored as strategies to improve the properties of PLA. This research aims to provide advanced and sustainable solutions for various industrial applications that demand materials with improved characteristics. In the current context of the polymer industry, the search for sustainable and environmentally friendly materials has taken on an outstanding role. This growing environmental awareness has prompted in-depth research and development in the search for innovative solutions that meet sustainability standards and, at the same time, offer exceptional properties and performance. Within this framework, the present research is immersed in the study and evaluation of promising alternatives to improve the inherent brittleness and stiffness of PLA by incorporating different materials, such as plasticizers, oligomers, compatibilizers or other polymers in binary blends. The first area of study of this research focuses on the incorporation of MLO as a compatibilizing agent in blends composed of polylactic acid (PLA) and styrene-b-(ethylene-ran-butylene)-b-styrene (SEBS). The results of this study provide strong evidence that MLO significantly outperforms traditional petroleum-derived compatibilizers. A noticeable increase in the impact resistance of these blends is achieved, which is essential in packaging applications that require adequate protection of the contained products. Furthermore, it is noted that the addition of MLO leads to a slight decrease in the glass transition temperature (Tg) in the PLA-rich phase. This effect can be beneficial in terms of flexibility, which is particularly relevant in packaging products that need adaptability and resistance to variable conditions. The second research plane focuses on the comprehensive comparison between compatibilizers of natural origin and those of petrochemical origin in PLA and polycarbonate (PC) blends. This analysis confirms that natural compatibilizers, including MLO and epoxidized linseed oil (ELO), present notable advantages in terms of impact resistance without compromising thermal stability. This finding underlines the viability and sustainability of biobased compatibilizers in specific packaging applications. Furthermore, the concept of reactive extrusion as an effective strategy to enhance the toughness of PLA blends is further explored. Both the inclusion of lactic acid oligomers (OLA) and the application of dicumyl peroxide (DCP) and MLO during the reactive extrusion process produce highly promising results. This includes a marked increase in impact resistance, a critical attribute in packaging applications where product integrity is essential. Importantly, the addition of MLO, in particular, results in outstanding transparency, a factor that further enhances its suitability for food packaging applications. Finally, the study of non-ester monoterpenoids and their impact on PLA is further explored. These compounds, including carvone, citral, citronellal and eucalyptol, have been shown to significantly improve the ductility of PLA without substantially affecting its transparency. This finding is particularly relevant in the context of packaging applications, where flexibility and resistance to deformation are critical aspects. Thus, these non-ester monoterpenoids present themselves as a promising option for th, Me gustaría realizar especial mención a los proyectos concedidos al grupo de investigación en el que he realizado la tesis doctoral. Por un lado, los proyectos del Ministerio de ciencia e innovación MAT2017–84909–C2–2–R y PID2020–116496RB–C22. Igualmente agradecer a la Generalitat Valenciana por los proyectos AICO/2021/025 y CIGE/2021/094
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The effects of processing parameters on mechanical properties of 3D-printed polyhydroxyalkanoates parts

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Peydro, M. A.|||0000-0002-8503-1505
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The crystallisation process of polyhydroxyalkanoates (PHA) polymers plays a key role on final properties of manufactured parts due to most PHA are highly sensitive to physical aging which leads to embrittlement. The secondary crystallisation associated with the aging process can be partially controlled by the cooling process during manufacturing or, even, by heat treatments such as annealing. A critical parameter in additive manufacturing is the difficulty to achieve good adhesion of the material to the printing bed. The bed temperature plays a key role on PHBH crystallisation, which leads to shrinkage having a negative effect on polymer-to-bed adhesion. In this work, a study of the effect of different processing parameters such as the printing temperature, the bed temperature, the cooling conditions, as well as raster direction on the final properties of PHBH 3D-printed parts is carried out., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/ 094. Wants to thank the Ministerio de Ciencia e Innovación and Universities for his FPU grant (FPU19/01759). Wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/ 185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding

  • Jordà-Reolid, María
  • Moreno-García, Virginia
  • Martínez-García, Asunción
  • Covas, José A.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this study, a new composite material is developed using a semi bio-based polypropylene (bioPP) and micronized argan shell (MAS) byproducts. To improve the interaction between the filler and the polymer matrix, a compatibilizer, PP-g-MA, is used. The samples are prepared using a co-rotating twin extruder followed by an injection molding process. The addition of the MAS filler improves the mechanical properties of the bioPP, as evidenced by an increase in tensile strength from 18.2 MPa to 20.8 MPa. The reinforcement is also observed in the thermomechanical properties, with an increased storage modulus. The thermal characterization and X-ray diffraction indicate that the addition of the filler leads to the formation of ¿ structure crystals in the polymer matrix. However, the addition of a lignocellulosic filler also leads to an increased affinity for water. As a result, the water uptake of the composites increases, although it remains relatively low even after 14 weeks. The water contact angle is also reduced. The color of the composites changes to a color similar to wood. Overall, this study demonstrates the potential of using MAS byproducts to improve their mechanical properties. However, the increased affinity with water should be taken into account in potential applications., This research was funded by [Aid for First Research Projects] grant number [PAID-06-22] and The APC was funded by [Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV)].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo y optimización de nuevas formulaciones de biopolímeros con principios activos para aplicaciones en el sector envase-embalaje

  • Rojas Lema, Sandra Paola
[ES] Esta tesis doctoral tuvo como objetivo principal el estudio, desarrollo y caracterización de nuevos materiales poliméricos mediante el uso de diferentes matrices poliméricas de origen natural y biodegradables, así como también de aditivos naturales y residuos agroindustriales, todo ello con la finalidad de obtener biopolímeros útiles en el sector envase y embalaje. Una de las matrices seleccionadas para su uso fue el bio-poli(etileno) de alta densidad (bio-HDPE). El bio-HDPE es un material que se puede obtener a partir de fuentes naturales renovables. Sin embargo, no es susceptible de biodegradación, es por ello que se planteó la adición de cargas y aditivos naturales a la matriz polimérica, con la finalidad de obtener nuevos materiales en los que el uso de estas cargas permita una disminución de la cantidad de matriz polimérica necesaria, además de la posibilidad de proporcionarle al polímero nuevas características y propiedades gracias a los principios activos (fenoles, flavonoides, etc.) que poseen en su estructura. Las cargas utilizadas fueron por un lado harina de piel de caqui (PPF) y, por otro, lignina Kraft (KL). Teniendo en consideración la baja compatibilidad que existe entre la matriz polimérica y las cargas naturales debido básicamente a su inherente hidrofobicidad e hidrofilicidad, respectivamente, se propuso el uso de diferentes técnicas de compatibilización. Adicionalmente, teniendo en consideración que las cargas de origen natural tienen diferentes principios activos en su estructura, algunos de ellos con capacidad antioxidante se analizó su efecto en las propiedades térmicas de las muestras con (PPF). El estudio continuó con la utilización de poli(ésteres) como el poli(ácido láctico) (PLA) y poli(butilén succinato) (PBS). En el caso del PLA se buscó mejorar la fragilidad propia del material mediante la adición de un oligómero de ácido láctico (OLA) como agente plastificante y se obtuvo que a mayor cantidad de plastificante la ductilidad del PLA incrementaba. Adicionalmente, con el fin de enfocar el material al uso en el sector de envase y embalaje, se buscó mejorar sus propiedades barrera mediante la incorporación de nanomateriales, concretamente nanotubos de haloisita (HNTs). En el caso del PBS, si bien es un material biodegradable, su obtención aún depende de fuentes petroquímicas total o parcialmente, además que su producción implica un alto costo, por tanto, es importante la búsqueda de alternativas que permitan combinarlo con recursos naturales, para lograr un material menos costoso y más respetuoso con el medio ambiente. Es por ello que se consideró el uso de harina de cáscara de pistacho (SPF) como carga natural. Una última fase de la tesis consistió en el aprovechamiento de los residuos agroindustriales, mediante la extracción de algunos de sus biopolímeros, entre ellos proteínas, lignina y nanocristales de celulosa (CNC), los cuales luego fueron combinados, con la finalidad de obtener películas para su posible uso en el sector envase y embalaje. La lignina y los CNC fueron obtenidos a partir de las piñas de pino y utilizados como materiales de refuerzo para la matriz de proteína procedente del haba. La incorporación de dichos compuestos en la película de proteína dio lugar a un incremento en las propiedades mecánicas en términos de módulo de Young y resistencia a la tracción, además tuvo repercusión en las propiedades barrera, reduciendo la permeabilidad al vapor de agua y al oxígeno. En las muestras con CNC se observó un incremento en la hidrofobicidad de las películas obtenidas, relacionado también con la disminución en el contenido de humedad y la solubilidad reportados. Por tanto, de manera general se puede decir que con el trabajo desarrollado se pudieron obtener materiales biopoliméricos con características prometedoras para su aplicación en el sector envase y embalaje, planteando con ello opciones al uso de materiales poliméricos derivados del petróleo., [CA] Aquesta tesi doctoral va tindre com a objectiu principal l'estudi, desenvolupament i caracterització de nous materials polimèrics mitjançant l'ús de diferents matrius polimèriques d'origen natural i biodegradables, així com també d'additius naturals i residus agroindustrials, tot això amb la finalitat d'obtindre biopolímers útils en el sector envase i embalatge. Una de les matrius seleccionades per al seu ús va ser el bio-poli(etilé) d'alta densitat (bio-HDPE). El bio-HDPE és un material que es pot obtindre a partir de fonts naturals renovables. No obstant això, no és susceptible de biodegradació, és per això que es va plantejar l'addició de càrregues i additius naturals a la matriu polimèrica, a més de la possibilitat de proporcionar-li al polímer noves característiques i propietats gràcies als principis actius (fenols, flavonoides, etc.) que posseeixen en la seua estructura. Les càrregues utilitzades van ser d'una banda farina de pell de caqui (PPF) i, per un altre, lignina Kraft (KL). Tenint en consideració la baixa compatibilitat que existeix entre la matriu polimèrica i les càrregues naturals degut bàsicament a la seua inherent hidrofobicitat i hidrofilicitat, respectivament, es va proposar l'ús de diferents tècniques de compatibilització. Addicionalment, tenint en consideració que les càrregues d'origen natural tenen diferents principis actius en la seua estructura, alguns d'ells amb capacitat antioxidant, es va analitzar el seu efecte en les propietats tèrmiques de les mostres mostres amb (PPF). L'estudi va continuar amb la utilització de polièsters com el poli(àcid làctic) (PLA) i poli(butilén succinat) (PBS). En el cas del PLA es va buscar millorar la fragilitat pròpia del material mitjançant l'addició d'un oligòmer d'àcid làctic (ONA) com a agent plastificant i es va obtindre que a major quantitat de plastificant la ductilitat del PLA incrementava. Addicionalment, amb la fi que enfocar el material a l'ús en el sector d'envàs i embalatge, es va buscar millorar les seues propietats barrera mitjançant la incorporació de nanomaterials, concretament nanotubs d'haloisita (HNTs). En el cas del PBS, si bé és un material biodegradable, la seua obtenció encara depén de fonts petroquímiques totalment o parcialment, a més que la seua producció implica un alt cost, per tant, és important la cerca d'alternatives que permeten combinar-lo amb recursos naturals, per a aconseguir un material menys costós i més respectuós amb el medi ambient. És per això que es va considerar l'ús de farina de corfa de pistatxo (SPF) com a càrrega natural. Una última fase de la tesi va consistir en l'aprofitament dels residus agroindustrials, mitjançant l'extracció d'alguns dels seus biopolímers, entre ells proteïnes, lignina i nanocristals de cel·lulosa (CNC), els quals després van ser combinats, amb la finalitat d'obtindre pel·lícules per al seu possible ús en el sector envase i embalatge. La lignina i els CNC van ser obtinguts a partir de les pinyes de pi i utilitzats com a materials de reforç per a la matriu de proteïna procedent de la fava. La incorporació d'aquests compostos en la pel·lícula de proteïna va donar lloc a un increment en les propietats mecàniques en termes de mòdul de Young i resistència a la tracció, a més va tindre repercussió en les propietats barrera, reduint la permeabilitat al vapor d'aigua i a l'oxigen. En les mostres amb CNC es va observar un increment en la hidrofobicitat de les pel·lícules obtingudes, relacionat també amb la disminució en el contingut d'humitat i la solubilitat reportats. Per tant, de manera general es pot dir que amb el treball desenvolupat es van poder obtindre materials biopolimerics amb característiques prometedores per a la seua aplicació en el sector envase i embalatge, plantejant amb això opcions a l'ús de materials polimèrics derivats del petroli., [EN] The main objective of this doctoral thesis was the study, development, and characterization of new polymeric materials using different polymeric matrices of natural origin and biodegradables, as well as natural additives and agro-industrial wastes, all with the aim of obtaining biopolymers useful in the packaging sector. One of the matrices selected for use was high-density bio-poly(ethylene) (bio-HDPE). Bio-HDPE is a material that can be obtained from natural renewable sources. However, it is not susceptible to biodegradation, which is why the addition of fillers and natural additives to the polymeric matrix was proposed. All of this with the purpose of obtaining new materials in which the use of these fillers allows a decrease in the amount of polymeric matrix required. In addition to the possibility of providing the polymer with new characteristics and properties thanks to the active principles (phenols, flavonoids, etc.) contained in its structure. The fillers used were persimmon peel flour (PPF) and Kraft lignin (KL). Considering the low compatibility between the polymeric matrix and the natural fillers, basically due to their inherent hydrophobicity and hydrophilicity, respectively, the use of different compatibilization techniques was proposed. In addition, taking into consideration that the fillers of natural origin have different active principles in their structure, some of them with antioxidant capacity, their effect on the thermal properties of the samples with (PPF) was analyzed. The study continued with the use of polyesters such as poly(lactic acid) (PLA) and poly(butylene succinate) (PBS). In the case of PLA, the aim was to improve the fragility of the material by adding a lactic acid oligomer (OLA) as a plasticizing agent. It was found that the greater the amount of plasticizer, the higher the ductility of PLA. Additionally, in order to focus the material for use in the packaging sector, it was sought to improve its barrier properties by incorporating nanomaterials, specifically halloysite nanotubes (HNTs). In the case of PBS, although it is a biodegradable material, its obtention still depends totally or partially on petrochemical sources, and its production implies a high cost; therefore, it is crucial to look for alternatives that allow combining it with natural resources, in order to achieve a less expensive and more environmentally friendly material. For this reason, pistachio shell flour (SPF) was considered as a natural filler. A final phase of the thesis consisted of using natural resources and agro-industrial wastes by extracting some of their biopolymers, including proteins, lignin, and cellulose nanocrystals (CNC), which were then combined in order to obtain films for possible use in the packaging sector. Lignin and CNCs were obtained from pine cones and used as reinforcing materials for the protein matrix obtained from faba beans. Incorporating these compounds in the protein film resulted increased mechanical properties in terms of Young's modulus and tensile strength, and also impacted on the barrier properties, reducing the permeability to water vapor and oxygen. In the CNC samples, an increase in the film's hydrophobicity was observed, which is also related to the decrease in moisture content and solubility reported. Therefore, in general, it is possible to say that with the work developed, it was possible to obtain biopolymeric materials with promising characteristics for their application in the packaging sector, thus offering options for the use of petroleum-derived polymeric materials., This research is a part of the grant PID2020-116496RB-C22 funded by MICINN/AEI/10.13039/501100011033, and the projects AICO/2021/025 and CIGE/2021/094 funded by Generalitat Valenciana-GVA. Funding for open access charge: Universitat Politècnica de València. The authors want to thank the Spanish Ministry of Science and Innovation, gthe Ministry of Science and Innovation (MICINN) [MAT2017-84909-C2-2-R]. for funding this research. S. Rojas-Lema is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasticized Mechanical Recycled PLA Films Reinforced with Microbial Cellulose Particles Obtained from Kombucha Fermented in Yerba Mate Waste

  • Agüero, Ángel
  • Corral Perianes, Esther
  • Abarca de las Muelas, Sara Soledad
  • García-Soto, María del Mar de la Fuente
  • Peltzer, Mercedes Ana
  • Arrieta, Marina Patricia
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this study, yerba mate waste (YMW) was used to produce a kombucha beverage, and the obtained microbial cellulose produced as a byproduct (KMW) was used to reinforce a mechanically recycled poly(lactic acid) (r¿PLA) matrix. Microbial cellulosic particles were also produced in pristine yerba mate for comparison (KMN). To simulate the revalorization of the industrial PLA products rejected during the production line, PLA was subjected to three extrusion cycles, and the resultant pellets (r3¿PLA) were then plasticized with 15 wt.% of acetyl tributyl citrate ester (ATBC) to obtain optically transparent and flexible films by the solvent casting method. The plasticized r3¿PLA¿ATBC matrix was then loaded with KMW and KMN in 1 and 3 wt.%. The use of plasticizer allowed a good dispersion of microbial cellulose particles into the r3¿PLA matrix, allowing us to obtain flexible and transparent films which showed good structural and mechanical performance. Additionally, the obtained films showed antioxidant properties, as was proven by release analyses conducted in direct contact with a fatty food simulant. The results suggest the potential interest of these recycled and biobased materials, which are obtained from the revalorization of food waste, for their industrial application in food packaging and agricultural films., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) through PID‐AEI project (grants PID2020‐116496RB‐C22 and PID2021‐123753NA‐C32) and TED‐ AEI project (grants TED2021‐129920A‐C43 and TED2021‐131762A‐I00) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe by the European Union . It was also funded by Comunidad de Madrid‐CAM ( Ayudas de Estímulo a la Investigación de Jóvenes Doctores de la Universidad Politécnica de Madrid , APOYO‐JOVENES‐21‐VUI9G6‐56‐ I7GABQ), Generalitat Valenciana‐GVA grant numbers AICO/2021/025 and CIGE/2021/094 and National University of Quilmes (UNQ, Argentina) through the R&D program (Expediente 1300/19). Ph.D. Ángel Agüero and Ph.D. Diego Lascano acknowledge the Margarita Salas postdoctoral grants from the Ministerio de Universidades, Spain, funded by the European Union Next Generation EU.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Mechanically Recycled PLA - MLO formulations

  • Beltrán, Freddys
  • Dominici, Franco
  • Agüero Rodriguez, Ángel
  • Lascano Aimacaña, Diego Sebastián
  • Arrieta, Marina Patricia
  • Balart, Rafael
  • PUGLIA, DEBORA
<p></p> <p>INFORMACIÓN GENERAL</p> <p></p> <p>3. Descripción del proyecto</p> <p>Estudio del reciclado mecánico de bandejas de PLA de post-consumo con aceite maleinizado de linaza como aditivo plastificante.</p> <p></p> <p>4. Descripción del dataset</p> <p>Datos experimentales obtenidos de la investigación del reciclado mecánico de PLA</p> <p></p> <p>METODOLOGÍA</p> <p></p> <p>1. Metodología (empleada para la recogida o generación de los datos)</p> <p>Los datos fueron obtenidos mediante diferentes técnicas experimentales incluyendo viscosimetría, calorimetría diferencial de barrido (DSC), análisis termogravimétrico (TGA), espectroscopía UV-Visible, espectroscopia FTIR, Resonancia Magnética Nuclear (1H-RMN), microscopía electrónica de barrido (SEM), microscopía de fuerza atómica (AFM), ensayos de tracción, ensayos de ángulo de contacto.</p> <p></p> <p>2. Software</p> <p>Archivos .tif: Fotografías SEM obtenidas mediante el software ZEISS SmartSEM.</p> <p>Archivos .jpg: Fotografías AFM obtenidas mediante el software NanoScope Analysis 2.0.</p> <p>Archivos .xlsx: Microsoft Excel</p> <p>Archivos .opj: OriginPro 9</p> <p></p> <p>FICHEROS</p> <p></p> <p>1. Ficheros (Relación de todos los ficheros que se incluyen en el dataset, estructura breve descripción de su contenido, indicar formato, idioma, versión, etc.)</p> <p></p> <p>Archivos .jpg (New-PLA, rPLA, rPLA1MLO, etc.): Fotografías AFM de las muestras</p> <p>Archivos .tif (1MLO_01, 1MLO_02, etc.): Fotografías SEM de las muestras</p> <p>Roughness.xlsx: Archivo con los valores de rugosidad de las diferentes muestras</p> <p>Contact_Angle.xlsx: Archivo con los resultados de ángulo de contacto</p> <p>Characteristic_Values_Tensile.xlsx: Archivo con los resultados de los ensayos de tracción</p> <p>DSC_Data.opj: Archivo con los datos de calorimetría diferencial de barrido.</p> <p>MFR and Thickness.xlsx: Archivo con espesores y valores de índice de fluidez</p> <p>FTIR_UPM.opj: Archivo con los datos de espectroscopía FTIR.</p> <p>SEM.zip: Carpeta con fotografías SEM de las muestras</p> <p>TGA_Data.opj: Archivo con los datos de análisis termogravimétrico</p> <p>UV-Vis.opj: Archivo con los datos de espectroscopía UV-Vis</p> <p>Viscosity.opj: Archivos con datos de viscosidad intrínseca</p>