Pasar al contenido principal

ENVASE ACTIVO MULTICAPA TERMOCONFORMABLE DE ALTA BARRERA BASADO EN BIOECONOMIA CIRCULAR

RTI2018-097249-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 62
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biodegradable Mono and Multilayer Materials with Antimicrobial Capacity Based on Circular Bioeconomy of Application Interest in Food Packaging

  • Figueroa López, Kelly Johana
[ES] El envasado activo es una de las tecnologías emergentes más relevantes de la industria alimentaria. Su objetivo es interactuar con el espacio de cabeza del envase para controlar las reacciones enzimáticas, químicas, físicas y microbiológicas que deterioran los alimentos por medio de la absorción o liberación. La actual tesis doctoral trata originalmente del desarrollo y la caracterización de estructuras de envasado de alimentos activas y biodegradables mono y multicapa basadas en materiales de polihidroxialcanoatos (PHA) electroestirados derivados de estrategias de bioeconomía circular. Con el fin de dotar con propiedades activas los materiales de envasado, se incorporaron a los PHA aceites esenciales, extractos naturales, nanopartículas metálicas o combinaciones de los mismos mediante electrospinning de soluciones. Las fibras resultantes de PHA por electrospinning se recocieron para obtener monocapas continuas que, posteriormente, se combinaron con películas de polímeros biodegradables fundidas, sopladas o fundidas con disolventes y/o con revestimientos de barrera de nanocristales de celulosa bacteriana (CNC) para desarrollar novedosos sistemas multicapa con propiedades antimicrobianas y de barrera. Estos sistemas multicapas basados en PHA presentaron un buen rendimiento térmico y mecánico, así como altas propiedades de barrera a los vapores y gases. Las películas activas también mostraron mejores propiedades antioxidantes y una alta actividad antimicrobiana contra las bacterias transmitidas por los alimentos tanto en sistemas abiertos como, lo que es más importante, en sistemas cerrados, que pueden imitar las condiciones de envasado en casos reales. Por lo tanto, los materiales y prototipos desarrollados en este trabajo pueden ser muy prometedores como materiales de envasado, para constituir bandejas, flow packs y tapas, siendo completamente renovables y también biodegradables, con una potencial capacidad de aumentar tanto la calidad, como la seguridad de los productos alimenticios en el nuevo contexto de la Bioeconomía Circular., [CA] L'envasament actiu és una de les tecnologies emergents més rellevants de la indústria alimentària. El seu objectiu és interactuar amb l'espai de cap de l'envàs per controlar les reaccions enzimàtiques, químiques, físiques i microbiològiques que deterioren els aliments per mitjà de l'absorció o alliberament. L'actual tesi doctoral tracta originalment de el desenvolupament i la caracterització d'estructures d'envasat d'aliments actives i biodegradables mono i multicapa basades en materials de polihidroxialcanoatos (PHA) electroestirados derivats d'estratègies de bioeconomia circular. Per tal de dotar amb propietats actives dels materials d'envasat, es van incorporar als PHA olis essencials, extractes naturals, nanopartícules metàl·liques o combinacions dels mateixos mitjançant electrospinning de solucions. Les fibres resultants de PHA per electrospinning es recocieron per obtenir monocapes contínues que, posteriorment, es van combinar amb pel·lícules de polímers biodegradables foses, bufades o foses amb dissolvents i / o amb revestiments de barrera de nanocristalls de cel·lulosa bacteriana (CNC) per desenvolupar nous sistemes multicapa amb propietats antimicrobianes i de barrera. Aquests sistemes multicapes basats en PHA van presentar un bon rendiment tèrmic i mecànic, així com altes propietats de barrera als vapors i gasos. Les pel·lícules actives també van mostrar millors propietats antioxidants i una alta activitat antimicrobiana contra bacteris transmeses pels aliments tant en sistemes oberts com, el que és més important, en sistemes tancats, que poden imitar les condicions d'envasament en casos reals. Per tant, els materials i prototips desenvolupats poden ser molt prometedors com materials d'envasat, per constituir safates, flow packs i tapes, sent completament renovables i també biodegradables, amb la capacitat potencial final d'augmentar tant la qualitat, com la seguretat de els productes alimentaris en el nou context de l'Bioeconomia Circular., [EN] Active packaging is one of the most relevant emerging technologies in the food industry. It aims to interact with the packaging headspace to control the enzymatic, chemical, physical, and microbiological reactions that deteriorate food through scavenging or releasing means. The current PhD thesis originally deals with the development and characterization of mono and multilayer active and biodegradable food packaging structures based on electrospun polyhydroxyalkanoates (PHA) materials derived from circular bioeconomy strategies. In order to provide the packaging materials with active properties, essential oils, natural extracts, metallic nanoparticles or combinations thereof were incorporated into PHA by solution electrospinning. The resultant electrospun PHA mats were annealed to obtain continuous monolayers that were, thereafter, combined with cast-extruded, blown or solvent-casted biodegradable polymer films and/or barrier coatings of bacterial cellulose nanocrystals (CNCs) to develop novel multilayer systems with antimicrobial and barrier properties. These PHA-based multilayers systems presented good thermal and mechanical performance as well as high barrier properties to vapors and gases. The active films also showed improved antioxidant properties and high antimicrobial activity against food-borne bacteria in both open and, more importantly, closed systems, which can mimic real case use packaging conditions. Therefore, the here-developed materials and prototypes can be very promising as packaging materials, to constitute trays, flow packs and lids, being completely renewable and also biodegradable, with the final potential capacity to increase both quality and safety of food products in the new Circular Bioeconomy context., Al programa Santiago Grisolía de la Generalitat Valenciana (0001426013N810001A201) por concederme la beca Predoctoral. Al proyecto EU H2020 YPACK “High Performance Polyhydroxyalkanoates Based Packaging to Minimise Food Waste” (Grant agreement 773872) de la Comisión Europea. Al proyecto RTI2018-097249-B-C21 financiado por el Ministerio de Ciencia e Innovación de España. A la Unidad Asociada IATA-UJI en “Polymer Technology”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Use of Gallic Acid as a Potential Natural Antioxidant and Ultraviolet Light Stabilizer in Cast-Extruded Bio-Based High-Density Polyethylene Films

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montava-Jorda, Sergi|||0000-0002-5378-0333
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Sammon, Chris
[Otros] This study originally explores the use of gallic acid (GA) as a natural additive in bio-based high-density polyethylene (bio-HDPE) formulations. Thus, bio-HDPE was first melt-compounded with two different loadings of GA, namely 0.3 and 0.8 parts per hundred resin (phr) of biopolymer, by twin-screw extrusion and thereafter shaped into films using a cast-roll machine. The resultant bio-HDPE films containing GA were characterized in terms of their mechanical, morphological, and thermal performance as well as ultraviolet (UV) light stability to evaluate their potential application in food packaging. The incorporation of 0.3 and 0.8 phr of GA reduced the mechanical ductility and crystallinity of bio-HDPE, but it positively contributed to delaying the onset oxidation temperature (OOT) by 36.5 ºC and nearly 44 ºC, respectively. Moreover, the oxidation induction time (OIT) of bio-HDPE, measured at 210 ºC, was delayed for up to approximately 56 and 240 min, respectively. Furthermore, the UV light stability of the bio-HDPE films was remarkably improved, remaining stable for an exposure time of 10 h even at the lowest GA content. The addition of the natural antioxidant slightly induced a yellow color in the bio-HDPE films and it also reduced their transparency, although a high contact transparency level was maintained. This property can be desirable in some packaging materials for light protection, especially UV radiation, which causes lipid oxidation in food products. Therefore, GA can successfully improve the thermal resistance and UV light stability of green polyolefins and will potentially promote the use of natural additives for sustainable food packaging applications., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. L.Q.-C. wants to thank Generalitat Valenciana (GVA) for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812). S.T.-G. is the recipient of a Juan de la Cierva contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Echegoyen, Y.
  • Lagarón, J. M.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter ¿ molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (¿¿) and the dielectric loss tangent (tan ¿) at wide ranges of frequency (from 10¿2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two ß-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric ¿-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the ß-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol¿1. The ¿-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva-Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Polysaccharide FucoPol-Based Nanofiber Systems

  • Vázquez-González, Yuliana
  • Prieto, Cristina
  • Stojanovic, Milan
  • Torres, Cristiana A.V.
  • Freitas, Filomena
  • Ragazzo-Sánchez, Juan Arturo
  • Calderón-Santoyo, Montserrat
  • Lagaron, José M.
[EN] The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol¿s low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications., This study was supported by the CYTED thematic network (code 319RT0576), the Spanish Ministry of Science and Innovation (MICI) project RTI-2018-097249-B-C21 and H2020 EU project USABLE PACKAGING (reference number 836884). This work received financial support from FCT¿Fundação para a Ciência e a Tecnologia, I.P. (Portugal), in the scope of projects UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences¿UCIBIO, and project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy¿i4HB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical Recycling of Partially Bio-Based and Recycled Polyethylene Terephthalate Blends by Reactive Extrusion with Poly(styrene-co-glycidyl methacrylate)

  • Montava-Jorda, Sergi|||0000-0002-5378-0333
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Martínez Sanz, Antonio Vicente|||0000-0001-6820-8631
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-45 wt% with recycled polyethylene terephthalate (r-PET) obtained from remnants of the injection blowing process of contaminant-free food-use bottles. The resultant compounded materials were thereafter shaped into pieces by injection molding for characterization. Poly(styrene-co-glycidyl methacrylate) (PS-co-GMA) was added at 1-5 parts per hundred resin (phr) of polyester blend during the extrusion process to counteract the ductility and toughness reduction that occurred in the bio-PET pieces after the incorporation of r-PET. This random copolymer effectively acted as a chain extender in the polyester blend, resulting in injection-molded pieces with slightly higher mechanical resistance properties and nearly the same ductility and toughness than those of neat bio-PET. In particular, for the polyester blend containing 45 wt% of r-PET, elongation at break (epsilon(b)) increased from 10.8% to 378.8% after the addition of 5 phr of PS-co-GMA, while impact strength also improved from 1.84 kJm(-2) to 2.52 kJm(-2). The mechanical enhancement attained was related to the formation of branched and larger macromolecules by a mechanism of chain extension based on the reaction of the multiple glycidyl methacrylate (GMA) groups present in PS-co-GMA with the hydroxyl (-OH) and carboxyl (-COOH) terminal groups of both bio-PET and r-PET. Furthermore, all the polyester blend pieces showed thermal and dimensional stabilities similar to those of neat bio-PET, remaining stable up to more than 400 degrees C. Therefore, the use low contents of the tested multi-functional copolymer can successfully restore the properties of bio-based but non-biodegradable polyesters during melt reprocessing with their recycled petrochemical counterparts and an effective mechanical recycling is achieved., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Monolayers Containing Eugenol and Their Application in Multilayer Antimicrobial Food Packaging

  • Figueroa-López, Kelly J.
  • Cabedo, Luis
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, different contents of eugenol in the 2.5-25 wt.% range were first incorporated into ultrathin fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by electrospinning and then subjected to annealing to obtain antimicrobial monolayers. The most optimal concentration of eugenol in the PHBV monolayer was 15 wt.% since it showed high electrospinnability and thermal stability and also yielded the highest bacterial reduction against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). This eugenol-containing monolayer was then selected to be applied as an interlayer between a structural layer made of a cast-extruded poly(3-hydroxybutyrate) (PHB) sheet and a commercial PHBV film as the food contact layer. The whole system was, thereafter, annealed at 160°C for 10 s to develop a novel multilayer active packaging material. The resultant multilayer showed high hydrophobicity, strong adhesion and mechanical resistance, and improved barrier properties against water vapor and limonene vapors. The antimicrobial activity of the multilayer structure was also evaluated in both open and closed systems for up to 15 days, showing significant reductions (R ¿ 1 and < 3) for the two strains of food-borne bacteria. Higher inhibition values were particularly attained against S. aureus due to the higher activity of eugenol against the cell membrane of Gram positive (G+) bacteria. The multilayer also provided the highest antimicrobial activity for the closed system, which better resembles the actual packaging and it was related to the headspace accumulation of the volatile compounds. Hence, the here-developed multilayer fully based on polyhydroxyalkanoates (PHAs) shows a great deal of potential for antimicrobial packaging applications using biodegradable materials to increase both quality and safety of food products., This research was funded by the Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the H2020 EU project YPACK (reference number 773872). KF-L is a recipient of a Santiago Grisolía (Ref. 0001426013N810001A201) research contract of the Valencian Government (GVA) whereas ST-G holds a Juan de la Cierva¿ Incorporación contract (IJCI-2016-29675) from MICI. The authors would also like to thank the Unidad Asociada IATA-UJI Plastics Technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microencapsulation of Copper(II) Sulfate in Ionically Cross-Linked Chitosan by Spray Drying for the Development of Irreversible Moisture Indicators in Paper Packaging

  • Rojas-Lema, Sandra
  • Terol, Jorge
  • Fages, Eduardo
  • Prieto, Cristina
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Copper(II) sulfate-loaded chitosan microparticles were herein prepared using ionic cross-linking with sodium tripolyphosphate (STPP) followed by spray drying. The microencapsulation process was optimal using an inlet temperature of 180 ºC, a liquid flow-rate of 290 mL/h, an aspiration rate of 90%, and an atomizing gas flow-rate of 667 nL/h. Chitosan particles containing copper(II) sulfate of approximately 4 microns with a shrunken-type morphology were effciently attained and, thereafter, fixated on a paper substrate either via cross-linking with STPP or using a chitosan hydrogel. The latter method led to the most promising system since it was performed at milder conditions and the original paper quality was preserved. The developed cellulose substrates were reduced and then exposed to different humidity conditions and characterized using colorimetric measurements in order to ascertain their potential as irreversible indicators for moisture detection. The results showed that the papers coated with the copper(II) sulfate-containing chitosan microparticles were successfully able to detect ambient moisture shown by the color changes of the coatings from dark brown to blue, which can be easily seen with the naked eye. Furthermore, the chitosan microparticles yielded no cytotoxicity in an in vitro cell culture experiment. Therefore, the cellulose substrates herein developed hold great promise in paper packaging as on-package colorimetric indicators for monitoring moisture in real time., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. S.R.-L. is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). S.T.-G. acknowledges MICI for his Juan de la Cierva Incorporación contract (IJCI-2016-29675). L.Q.-C. thanks GVA for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Barrier biopaper multilayers obtained by impregnation of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with protein and polysaccharide hydrocolloids

  • Melendez-Rodriguez, Beatriz
  • M&apos;Bengue, Marie-Stella
  • Cabedo, Luis
  • Prieto, Cristina
  • Lagaron, Jose Maria
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Multilayer biopapers composed of two electrospun layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were impregnated, at the inner side of one of the layers, with cellulose nanocrystals (CNCs) and their composites with hydrocolloids, to develop high-barrier fully biobased structures. The study aimed for the first time at comparing the impregnation of electrospun fibers with several biopolymer solutions. Thus, neat CNCs, and CNCs mixed as a minor fraction, that is, 2 wt%, with gelatin (GE), agar (AG), xanthan gum (XG), and gum arabic (GA) were assessed in their potential to improve the barrier properties of PHBV. Glycerol plasticizer was added to the composite formulations. The impregnated electrospun multilayer mats were subsequently annealed, below the PHBV melting point, to yield continuous films by an interfiber coalescence process, so-called biopapers, and thereafter characterized to evaluate their potential for high barrier food packaging applications. The morphological characterization revealed good interlayer adhesion, more noticeably for those containing CNCs and their nanocomposites with AG and XG. From their mechanical response, it was inferred that the material behavior was governed mainly by the rigidity of the PHBV substrates, and this could not be significantly improved by impregnation with any of the various hydrocolloids. Whereas the water vapor barrier was not seen to improve in any of the samples, the barrier to the organic vapor limonene, used as a standard for aroma barrier, was however improved in the samples impregnated with AG and XG composites. Interestingly, the oxygen barrier properties were significantly improved but only by impregnation with pure CNCs. This study reports for the first time a scalable impregnation technology approach to produce fully biobased barrier multilayers., This research work was funded by the H2020 EU project USABLE PAKAGING (reference number 836884) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21. Ms. Beatriz Melendez-Rodriguez would like to acknowledge the MICI for her FPI fellowship (BES-2016-077972) and Dr. Torres-Giner for his MICI Juan de la Cierva¿Incorporacion contract (IJCI-2016-29675). The authors would also like to acknowledge the Unidad Asociada IATA (CSIC)-UJI in Polymer Technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Active Barrier Multilayer Films Based on Electrospun Antimicrobial Hot-Tack Food Waste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Cellulose Nanocrystal Interlayers

  • Figueroa-Lopez, Kelly J.
  • Angulo, Inmaculada
  • Pardo-Figuerez, Maria
  • Escuin, Jose Manuel
  • Bourbon, Ana Isabel
  • Cabedo, Luis
  • Nevo, Yuval
  • Cerqueira, Miguel A.
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Active multilayer films based on polyhydroxyalkanoates (PHAs) with and without high barrier coatings of cellulose nanocrystals (CNCs) were herein successfully developed. To this end, an electrospun antimicrobial hot-tack layer made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from cheese whey, a by-product from the dairy industry, was deposited on a previously manufactured blown film of commercial food contact PHA-based resin. A hybrid combination of oregano essential oil (OEO) and zinc oxide nanoparticles (ZnONPs) were incorporated during the electrospinning process into the PHBV nanofibers at 2.5 and 2.25 wt%, respectively, in order to provide antimicrobial properties. A barrier CNC coating was also applied by casting from an aqueous solution of nanocellulose at 2 wt% using a rod at 1m/min. The whole multilayer structure was thereafter assembled in a pilot roll-to-roll laminating system, where the blown PHA-based film was located as the outer layers while the electrospun antimicrobial hot-tack PHBV layer and the barrier CNC coating were placed as interlayers. The resultant multilayer films, having a final thickness in the 130-150 mu m range, were characterized to ascertain their potential in biodegradable food packaging. The multilayers showed contact transparency, interlayer adhesion, improved barrier to water and limonene vapors, and intermediate mechanical performance. Moreover, the films presented high antimicrobial and antioxidant activities in both open and closed systems for up to 15 days. Finally, the food safety of the multilayers was assessed by migration and cytotoxicity tests, demonstrating that the films are safe to use in both alcoholic and acid food simulants and they are also not cytotoxic for Caco-2 cells., The Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the EU H2020 YPACK (reference number 773872) projects funded this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Different Compatibilization Strategies to Improve the Performance of Injection-Molded Green Composite Pieces Made of Polylactide Reinforced with Short Flaxseed Fibers

  • Agüero, Ángel
  • Rojas-Lema, Sandra Paola
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfully compounded by twin-screw extrusion (TSE) and subsequently shaped into pieces by injection molding. The linen waste derived FFs were subjected to an alkalization pretreatment to remove impurities, improve the fiber surface quality, and make the fibers more hydrophobic. The alkali-pretreated FFs successfully reinforced PLA, leading to green composite pieces with higher mechanical strength. However, the pieces also showed lower ductility and toughness and the lignocellulosic fibers easily detached during fracture due to the absence or low interfacial adhesion with the biopolyester matrix. Therefore, four different compatibilization strategies were carried out to enhance the fiber-matrix interfacial adhesion. These routes consisted on the silanization of the alkalized FFs with a glycidyl silane, namely (3-glycidyloxypropyl) trimethoxysilane (GPTMS), and the reactive extrusion (REX) with three compatibilizers, namely a multi-functional epoxy-based styrene-acrylic oligomer (ESAO), a random copolymer of poly(styrene-co-glycidyl methacrylate) (PS-co-GMA), and maleinized linseed oil (MLO). The results showed that all the here-tested compatibilizers improved mechanical strength, ductility, and toughness as well as the thermal stability and thermomechanical properties of the green composite pieces. The highest interfacial adhesion was observed in the green composite pieces containing the silanized fibers. Interestingly, PS-co-GMA and, more intensely, ESAO yielded the pieces with the highest mechanical performance due to the higher reactivity of these additives with both composite components and their chain-extension action, whereas MLO led to the most ductile pieces due to its secondary role as plasticizer for PLA., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. D.L. and J.I.-M. thanks UPV for the grant received through the PAID-01-18 and PAID-01-19 (SP2019001) programs, respectively. S.T.-G. is recipient of a Juan de la Cierva contract (IJCI-2016-29675) from MICIU while S.R.J. is funded through the Santiago Gisolía contract (GRISOLIAP/2019/132) from Generalitat Valenciana (GVA). The microscopy services of UPV are also acknowledged for their help in collecting and analyzing the FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Blends of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) with Fruit Pulp Biowaste Derived Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate-co-3-Hydroxyhexanoate) for Organic Recycling Food Packaging

  • Melendez-Rodriguez, Beatriz
  • Reis, Maria A. M.
  • Silva, Fernando
  • Matos, Mariana
  • Cabedo, Luis
  • Lagarón, José María
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, a new poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) [P(3HB-co-3HV-co-3HHx)] terpolyester with approximately 68 mol% of 3-hydroxybutyrate (3HB), 17 mol% of 3-hydroxyvalerate (3HV), and 15 mol% of 3-hydroxyhexanoate (3HHx) was obtained via the mixed microbial culture (MMC) technology using fruit pulps as feedstock, a processing by-product of the juice industry. After extraction and purification performed in a single step, the P(3HB-co-3HV-co-3HHx) powder was melt-mixed, for the first time, in contents of 10, 25, and 50 wt% with commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Thereafter, the resultant doughs were thermo-compressed to obtain highly miscible films with good optical properties, which can be of interest in rigid and semirigid organic recyclable food packaging applications. The results showed that the developed blends exhibited a progressively lower melting enthalpy with increasing the incorporation of P(3HB-co-3HV-co-3HHx), but retained the PHB crystalline morphology, albeit with an inferred lower crystalline density. Moreover, all the melt-mixed blends were thermally stable up to nearly 240 degrees C. As the content of terpolymer increased in the blends, the mechanical response of their films showed a brittle-to-ductile transition. On the other hand, the permeabilities to water vapor, oxygen, and, more notably, limonene were seen to increase. On the overall, this study demonstrates the value of using industrial biowaste derived P(3HB-co-3HV-co-3HHx) terpolyesters as potentially cost-effective and sustainable plasticizing additives to balance the physical properties of organic recyclable polyhydroxyalkanoate (PHA)-based food packaging materials, This research was supported by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and by the EU H2020 BBI JU project USABLE PAKAGING (reference number 836884)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo-Figuerez, María
  • Prieto, Cristina
  • Arnal, Carmen
  • Cabedo, Luis
  • Lagaron, José M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-BC1 and PID2021-128749OB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Procesado y caracterización de formulaciones industriales de poliésteres alifáticos mediante tecnologías de inyección y fabricación aditiva

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[ES] El principal objetivo de la presente tesis doctoral se centra en la obtención de poliésteres alifáticos con propiedades mejoradas para su empleo en procesos industriales aplicando técnicas de fabricación específicas de polímeros como son el proceso de inyección o la fabricación aditiva. Para alcanzar dicho objetivo se proponen diferentes estrategias como la incorporación de aditivos plastificantes de origen natural, la incorporación de cargas naturales, la obtención de mezclas con otros polímeros, así como la incorporación de aditivos orientados al sector médico. En una primera fase, se han estudiado los poliésteres alifáticos de la familia de los polihidroxialcanoatos - PHA. Las modificaciones realizadas a los polihidroxialcanoatos van desde la incorporación de residuos de cáscara de almendra para la obtención de composites, el desarrollo de mezclas binarias con poli(¿-caprolactona) para la mejora de las propiedades dúctiles y el análisis del efecto de diferentes plastificantes derivados de terpenoides, concretamente ésteres de geraniol. En esta primera fase se propone el uso del moldeo mediante inyección para la determinación precisa de las propiedades que alcanzan las formulaciones tras las modificaciones realizadas. Posteriormente se propone el uso de los polihidroxialcanoatos para su empleo en el sector médico debido a sus propiedades biocompatibles y bioabsorbibles. En un primer momento se opta por analizar el efecto de los parámetros a emplear en fabricación aditiva empleando PHA, siendo polímeros con una ventana de procesado bastante estrecha, y con una alta sensibilidad al grado de cristalinidad que alcanzan en función de las condiciones de enfriamiento. La incorporación de aditivos osteoconductores como la hidroxiapatita tiene un especial interés para la mejora del proceso de regeneración ósea; es por ello que se considera como aditivo para PHA en el sector médico. En un primer trabajo, se propone el uso del proceso de moldeo por inyección para determinar las propiedades que se obtienen con la incorporación de las nanopartículas de hidroxiapatita. Posteriormente, esas mismas formulaciones se emplean en impresión 3D para ofrecer una aplicación más directa al sector médico mediante la obtención de scaffolds que pueden ser empleados en procesos de regeneración ósea. Finalmente, esta tesis aborda el empleo de ácido poliláctico - PLA, empleando las técnicas de conformado mediante inyección y fabricación aditiva. El PLA es un poliéster alifático con propiedades y coste interesante, pero presenta una elevada fragilidad; es por ello que el uso de plastificantes naturales derivados de ésteres del ácido itacónico ofrece una especial relevancia para el desarrollo de formulaciones con alta ductilidad. Adicionalmente, el PLA es un material con alto interés en fabricación aditiva. El empleo de diferentes patrones y la cantidad de relleno tiene un efecto marcado sobre el comportamiento mecánico de los componentes fabricados mediante impresión 3D, que también está vinculado con el tiempo necesario para completar la impresión. Una de las aplicaciones interesantes de la fabricación aditiva con PLA, es la fabricación de dispositivos médicos con la capacidad de ser reabsorbidos por el cuerpo humano de forma progresiva. En este sentido se propone el diseño y validación de una prótesis de fijación ósea para fémur., [CA] El principal objectiu de la present tesi doctoral se centra en l'obtenció de polièsters alifàtics amb propietats millorades per al seu ús en processos industrials aplicant tècniques de fabricació específiques de polímers com són el procés d'injecció o la fabricació additiva. Per a aconseguir aquest objectiu es proposen diferents estratègies com la incorporació d'additius plastificants d'origen natural, la incorporació de càrregues naturals, l'obtenció de mescles amb altres polímers, així com la incorporació d'additius orientats al sector mèdic. En una primera fase, s'han estudiat els polièsters alifàtics de la família dels polihidroxialcanoats - PHA. Les modificacions realitzades als polihidroxialcanoats van des de la incorporació de residus de corfa d'ametla per a l'obtenció de compòsits, el desenvolupament de mescles binàries amb poli(¿-caprolactona) per a la millora de les propietats dúctils i l'anàlisi de l'efecte de diferents plastificants derivats de terpenoids, concretament èsters de geraniol. En aquesta primera fase es proposa l'ús del moldeig mitjançant injecció per a la determinació precisa de les propietats que aconsegueixen les formulacions després de les modificacions realitzades. Posteriorment es proposa l'ús d'aquests polihidroxialcanoats per al seu ús en el sector mèdic donat que tenen propietats biocompatibles i bioabsorbibles. En un primer moment s'opta per analitzar l'efecte dels paràmetres a emprar en fabricació additiva en els utilitzant PHA, donat que es tracta de polímers amb una finestra de processament bastant estreta, i amb una alta sensibilitat pel grau de cristal·linitat que aconsegueixen en funció de les condicions de refredament. La incorporació d'additius osteoconductors com la hidroxiapatita té un especial interés per a la millora del procés de regeneració òssia; és per això que es considera com a additiu per a PHA per al sector mèdic. En un primer treball, es proposa l'ús del procés de moldeig per injecció per a determinar les propietats que s'aconsegueixen amb la incorporació de les nanopartícules d'hidroxipatita. Posteriorment, aqueixes mateixes formulacions s'utilitzen en impressió 3D per oferir una aplicació més directa al sector mèdic mitjançant l'obtenció d'scaffolds que poden ser emprats en processos de regeneració òssia. Finalment, aquesta tesi aborda l'ús de l'àcid poliláctic - PLA emprant les tècniques de conformat mitjançant injecció i fabricació additiva. El PLA és un polièster alifàtic amb propietats i cost interessants, però presenta una elevada fragilitat; és per això que l'ús de plastificants naturals derivats d'èsters de l'àcid itacònic té una especial rellevància per al desenvolupament de formulacions amb alta ductilitat. Addicionalment, el PLA és un material amb alt interés en fabricació additiva. L'ús de diferents patrons i la quantitat de farciment té un efecte marcat sobre el comportament mecànic dels components fabricats mitjançant impressió 3D, que també està vinculat amb el temps necessari per a completar la impressió. Una de les aplicacions interessants de la fabricació additiva amb PLA, és la fabricació de dispositius mèdics amb la capacitat de ser reabsorbits pel cos humà de manera progressiva. En aquest sentit es proposa el disseny i validació d'una pròtesi de fixació òssia per a fèmur., [EN] The main objective of this thesis is to obtain aliphatic polyesters with improved properties for their application in industrial processes by applying conventional polymer processing techniques such as injection moulding and additive manufacturing. In order to reach the aforementioned objective several strategies are proposed such as the incorporation of natural origin plasticizing additives, the incorporation of natural fillers, the development of polymer blends and the incorporation of additives for the medical sector. The first stage of this research consists in the study of aliphatic polyesters from polyhydroxyalkanoates - PHA. The modifications made to those polymers have been the introduction of almond shell wastes to produce composites, the development of binary blends with poly(¿-caprolactone) to improve ductile properties and the addition of different plasticizers derived from terpenoids, more specifically geraniol esters. In this first stage, injection-moulding is proposed to obtain all the properties and features of the formulations after the aforementioned modifications. Afterwards, the use of these polyhydroxyalkanoates in the medical sector due to they are biocompatible and resorbable, is proposed. First, the effect of the parameters to be used in additive manufacturing of PHA is analysed. These polymers possess a very narrow processing window and a great sensitiveness to the degree of crystallinity depending on the cooling conditions. The incorporation of osteoconductive additives such as hydroxyapatite is of great interest for the improvement of the bone regeneration process, so it is considered as an additive of PHA for medical applications. It is for this reason that in the first work, injection moulding is used for determining the effect of nanohydroxyapatite have on the polymer matrix. Then, the developed formulations are used in 3D printing to assess the feasibility of this technology for the medical sector by obtaining scaffolds structures that can be used in bone regeneration processes. Finally, poly(lactic acid) - PLA is processed by injection-moulding and additive manufacturing to assess the feasibility of these techniques. PLA is a cost-effective aliphatic polyester with balanced properties; nevertheless, it shows high intrinsic brittleness. Therefore, the use of natural plasticizers derived from esters of itaconic acid are of especial interest for the development of formulations with improved toughness. Additionally, PLA is a material with a great interest in additive manufacturing. The use of different patterns and infills used in 3D printing play a key role on mechanical behavior of the 3D-printed components, which is also related to the overall 3D-printing time. One of the interesting applications of additive manufacturing with PLA, is the production of medical devices with the ability to be progressively reabsorbed by the human body. In this sense, the design and validation of a femur fixing prosthesis is proposed., I would like to thank the Ministry of Universities for their financial support through the FPU grant FPU19/01759 regarding my PhD studies. I am very grateful to Universitat Politècnica de València for their financial support through the FPI PhD grant PAID–2019– SP20190011. I thank the Ministry of Science and Innovation for their financial support to the research group in the projects RTI2018–097249–B–C21, MAT2017–84909–C2–2–R and PID2020–116496RB–C22. I acknowledge Generalitat Valenciana for their grants AICO/2021/025 and CIGE/2021/094 as a support to the research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Municipal Biowaste into Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers for Food Packaging Applications

  • Meléndez-Rodríguez, Beatriz
  • Lorini, Laura
  • Valentino, Francesco
  • Sammon, Chris
  • Cabedo, Luis
  • Lagaron, Jose Maria
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present study reports on the production and characterization of a new biopackaging material made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from municipal biowaste (MBW) and produced by the mixed bacterial culture technology. After purification and extraction, the MBW-derived PHBV was processed by electrospinning to yield defect-free ultrathin fibers, which were thermally post-treated. Annealing at 130 degrees C, well below the biopolymer's melting temperature (T-m), successfully yielded a continuous film resulting from coalescence of the electrospun fibrillar morphology, the so-called biopaper, exhibiting enhanced optical and color properties compared to traditional melt compounding routes. The crystallinity and crystalline morphology were comprehensively studied as a function of temperature by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and combined time-resolved synchrotron small- and wide-angle X-ray scattering (SAXS and WAXS) experiments, which clearly indicated that the molecular order within the copolyester was improved up to a maximum at 130 degrees C, and then it decreased at the biopolymer's T-m. It was hypothesized that by annealing at the temperature at which the thermally induced molecular order is maximized, the fibers generated sufficient mobility to align alongside, hence reducing surface energy and porosity. The data suggest that this material shows a good balance between enhanced mechanical and improved barrier properties to vapors and gases in comparison to traditional paper and other currently used petroleum-derived polymers, thus presenting significant potential to be part of innovative food biopackaging designs for the protection and preservation of foods in a circular bioeconomy scenario., The Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and EU projects H2020 YPACK (reference number 773872) and H2020 USABLE (reference number 836884) are acknowledged for funding support. B.M.-R. and S.T.-G. would also like to thank MICI for the FPI fellowship (BES-2016-077972) and the Juan de la Cierva IncorporaciOn contract (IJCI-2016-29675), respectively. The ALBA Synchrotron, Spain, is also acknowledged for the funding received through the project proposal 2018022619. The authors also thank the "Unidad Asociada CSIC-UJI in Polymers Technology".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of electrospun active films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by the incorporation of cyclodextrin inclusion complexes containing oregano essential oil

  • Figueroa-Lopez, K.J.
  • Enescu, D.
  • Cabedo, L.
  • Cerqueira, M.A.
  • Pastrana, L.
  • Fuciños, P.
  • Lagaron, J.M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This paper reports the development of biodegradable active packaging films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by the incorporation of alpha- and gamma-cyclodextrins (alpha-CD and gamma-CDs) containing oregano essential oil (OEO). Herein, both the kneading method (KM) and freeze-drying method (FDM) were first explored for the preparation of alpha-CD:OEO and gamma-CD:OEO inclusion complexes at host:guest ratios of 80:20 wt/wt and 85:15 wt/wt, respectively. The results showed that KM was the most efficient method for the encapsulation of OEO in the CDs cavity in terms of simplicity and rapidity, while it was also yielded the inclusion complexes with the highest antimicrobial and antioxidant performance. The alpha-CD:OEO and gamma-CD:OEO inclusion complexes obtained by KM were thereafter incorporated at 10, 15, 20, 25, and 30 wt% into PHBV fibres by electrospinning and annealed at 160 degrees C to produce contact transparent films. It was observed that the optimal concentration of alpha-CD:OEO and gamma-CD:OEO inclusion complexes for homogeneous and continuous film formation was attained at contents of 15 and 25 wt%, respectively. Higher antimicrobial and antioxidant activities were obtained for the gamma-CD:OEO inclusion complexes due to the greater encapsulation efficiency of OEO in gamma-CD, resulting in PHBV films with good performance for up to 15 days. This aspect, together with their improved thermal stability and mechanical strength, give interesting applications to these biopolymer films in the design of active-releasing packaging materials to maintain the physical, chemical, and microbiological characteristics of food products., The authors would like to thank the Unidad Asociada IATA-UJI "Plastics Technology" and the Spanish Ministry of Science and Innovation (MICI) project RTI 2018-097249-B-C21 and the H2020 EU project YPACK (reference number 773872) for funding. Kelly J. Figueroa-Lopez and S. Torres-Giner are recipients of a Grisolia scholarship (Ref. 0001426013N810001A201) of the Valencian Government (GVA) and a Juan de la Cierva-Incorporaci.on contract (IJCI-2016-29675) from MICI, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Oxygen-Barrier Multilayer Films Based on Polyhydroxyalkanoates and Cellulose Nanocrystals

  • Meléndez-Rodríguez, Beatriz
  • Angulo, Inmaculada
  • Pardo-Figuerez, Maria
  • Hilliou, Loic
  • Escuin, Jose Manuel
  • Cabedo, Luis
  • Nevo, Yuval
  • Prieto, Cristina
  • Lagaron, Jose Maria
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This study reports on the development and characterization of organic recyclable high-oxygen-barrier multilayer films based on different commercial polyhydroxyalkanoate (PHA) materials, including a blend with commercial poly(butylene adipate-co-terephthalate) (PBAT), which contained an inner layer of cellulose nanocrystals (CNCs) and an electrospun hot-tack adhesive layer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from cheese whey (CW). As a result, the full multilayer structures were made from bio-based and/or compostable materials. A characterization of the produced films was carried out in terms of morphological, optical, mechanical, and barrier properties with respect to water vapor, limonene, and oxygen. Results indicate that the multilayer films exhibited a good interlayer adhesion and contact transparency. The stiffness of the multilayers was generally improved upon incorporation of the CNC interlayer, whereas the enhanced elasticity of the blend was reduced to some extent in the multilayer with CNCs, but this was still much higher than for the neat PHAs. In terms of barrier properties, it was found that 1 mu m of the CNC interlayer was able to reduce the oxygen permeance between 71% and 86%, while retaining the moisture and aroma barrier of the control materials., This research work was funded by the H2020 EU project YPACK (reference number 773872) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the Properties of Thermo-Compressed Polylactide Films for Food Packaging Applications by Individual and Combined Additions of Lactic Acid Oligomer and Halloysite Nanotubes

  • Rojas-Lema, Sandra
  • Melendez-Rodriguez, Beatriz
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this work, films of polylactide (PLA) prepared by extrusion and thermo-compression were plasticized with oligomer of lactic acid (OLA) at contents of 5, 10, and 20 wt%. The PLA sample containing 20 wt% of OLA was also reinforced with 3, 6, and 9 parts per hundred resin (phr) of halloysite nanotubes (HNTs) to increase the mechanical strength and thermal stability of the films. Prior to melt mixing, ultrasound-assisted dispersion of the nanoclays in OLA was carried out at 100 ºC to promote the HNTs dispersion in PLA and the resultant films were characterized with the aim to ascertain their potential in food packaging. It was observed that either the individual addition of OLA or combined with 3 phr of HNTs did not significantly affect the optical properties of the PLA films, whereas higher nanoclay contents reduced lightness and induced certain green and blue tonalities. The addition of 20 wt% of OLA increased ductility of the PLA film by nearly 75% and also decreased the glass transition temperature (Tg) by over 18 ºC. The incorporation of 3 phr of HNTs into the OLA-containing PLA films delayed thermal degradation by 7 ºC and additionally reduced the permeabilities to water and limonene vapors by approximately 8% and 47%, respectively. Interestingly, the highest barrier performance was attained for the unfilled PLA film plasticized with 10 wt% of OLA, which was attributed to a crystallinity increase and an effect of ¿antiplasticization¿. However, loadings of 6 and 9 phr of HNTs resulted in the formation of small aggregates that impaired the performance of the blend films. The here-attained results demonstrates that the properties of ternary systems of PLA/OLA/HNTs can be tuned when the plasticizer and nanofiller contents are carefully chosen and the resultant nanocomposite films can be proposed as a bio-sourced alternative for compostable packaging applications., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. S.R.-L is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). L.Q.-C. wants to thank GVA for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812), while D.G.-G. also acknowledges GVA for his postdoctoral contract (APOSTD/2019/201). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva¿Incorporación contract (IJCI-2016-29675), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Fabricación y caracterización de materiales compuestos de alto rendimiento medioambiental derivados de resinas ecológicas y refuerzos de fibras naturales y estructuras híbridas

  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
[ES] Es evidente cómo el aumento de la concienciación medioambiental respecto al uso de materiales poliméricos de origen petroquímico o plásticos de un único uso ha cambiado por completo el panorama de los materiales poliméricos, desde el punto de vista de su concepción o de su uso. Durante el desarrollo de esta tesis doctoral se ha abarcado varias alternativas con el fin de obtener materiales nuevos, que no tengan solo un bajo impacto ambiental, sino también que posean propiedades competitivas al compararlos con materiales convencionales, además de que su elaboración no conlleve un cambio drástico con respecto a las tecnologías existentes en la actualidad. Es por eso por lo que el objetivo principal de esta tesis doctoral se centra en el desarrollo y caracterización de nuevos materiales con un alto rendimiento medioambiental a partir de matrices termoplásticas como el poli(ácido láctico) (PLA) y matrices termoestables como resinas epoxi con un contenido parcial o total de origen natural. Además del uso de rellenos y fibras de origen natural., [CA] És evident com l'augment de la conscienciació mediambiental respecte a l'ús de materials polimèrics d'origen petroquímic o plàstics d'un únic ús ha canviat per complet el panorama dels materials polimèrics, des del punt de vista de la seua concepció o del seu ús. Durant el desenvolupament d'aquesta tesi doctoral s'han tingut en compte diverses alternatives amb la finalitat d'obtindre materials nous, que no tinguen només un baix impacte ambiental, sinó també que posseïsquen propietats competitives en comparar-los amb materials convencionals, a més de que la seua elaboració no comporte un canvi dràstic respecte a les tecnologies existents en l'actualitat. És per això, per la qual cosa l'objectiu principal d'aquesta tesi doctoral se centra en el desenvolupament i caracterització de nous materials amb un alt rendiment mediambiental a partir de matrius termoplàstiques com el àcid polilàctic (PLA) i matrius termoestables com a resines epoxi amb un contingut parcial o total d'origen natural. A més de l'ús de reforços i fibres d'origen natural., [EN] It is remarkable how the increase in environmental awareness regarding the use of polymeric materials of petrochemical origin or single-use plastics has completely changed the scenario of polymeric materials development and use. This doctoral thesis has proposed several alternatives in order to obtain new materials with low environmental impact and competitive properties to conventional materials. In addition to the fact that their elaboration does not entail a drastic change respect to existing technologies. Therefore, the main objective of this doctoral thesis focuses on developing and characterizing new materials with a high environmental performance from thermoplastic matrices such as poly(lactic acid) (PLA) and thermosetting matrices such as epoxy resins with a partial or total content of natural origin. In addition to the use of fillers and fibers of natural origin., This research work was funded by the Spanish Ministry of Science, Innovation and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. D.L. thanks Universitat Politècnica de València (UPV) for the grant received through the PAID-01-18 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Fully Renewable and Biodegradable Polyhydroxyalkanoate Blends with Improved Thermoformability

  • Feijoo, Patricia
  • Samaniego-Aguilar, Kerly
  • Sánchez-Safont, Estefanía
  • Lagaron, Jose M.
  • Gamez-Perez, Jose
  • Cabedo, Luis
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Poly(3-hydroxybutyrate-co-3-valerate) (PHBV), being one of the most studied and commercially available polyhydroxyalkanoates (PHAs), presents an intrinsic brittleness and narrow processing window that currently hinders its use in several plastic applications. The aim of this study was to develop a biodegradable PHA-based blend by combining PHBV with poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH), another copolyester of the PHA family that shows a more ductile behavior. Blends of PHBV with 20% wt., 30% wt., and 40% wt. of PHBH were obtained by melt mixing, processed by cast extrusion in the form of films, and characterized in terms of their morphology, crystallization behavior, thermal stability, mechanical properties, and thermoformability. Full miscibility of both biopolymers was observed in the amorphous phase due to the presence of a single delta peak, ranging from 4.5 degrees C to 13.7 degrees C. Moreover, the incorporation of PHBH hindered the crystallization process of PHBV by decreasing the spherulite growth rate from 1.0 mu m/min to 0.3 mu m/min. However, for the entire composition range studied, the high brittleness of the resulting materials remained since the presence of PHBH did not prevent the PHBV crystalline phase from governing the mechanical behavior of the blend. Interestingly, the addition of PHBH greatly improved the thermoformability by widening the processing window of PHBV by 7 s, as a result of the increase in the melt strength of the blends even for the lowest PHBH content., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER "Una manera de hacer Europa", project number RTI2018-097249-B-C21. Moreover, this work has also been granted with the financial support of the Generalitat Valenciana (project AICO/2021/045), H2020 EU Project YPACK (H2020-SFS-2017-1, Reference 773872) and by the Universitat Jaume I (project UJI-B2019-44). K.S-A. would like to acknowledge the MCIN/AEI/10.13039/501100011033 and FSE "El FSE invierte en tu futuro" for their FPI fellowship (PRE2019-091448). S.T-G. acknowledges the Spanish Ministry of Science, Innovation and Universities (MICIU) for the funding received during their Juan de la Cierva-Incorporacion contract (IJCI-2016-29675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Electrospun Biopapers of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Derived from Cheese Whey with Varying 3-Hydroxyvalerate Contents

  • Meléndez-Rodríguez, Beatriz
  • Reis, Maria A. M.
  • Carvalheira, Monica
  • Sammon, Chris
  • Cabedo, Luis
  • Lagaron, Jose Maria
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, three different newly developed copolymers of poly(3-hydroxybutyrate-co-3-hydroxyval-erate) (PHBV) with 20, 40, and 60 mol % contents in 3-hydroxyvalerate (3HV) were produced by the biotechnological process of mixed microbial cultures (MMCs) using cheese whey (CW), a by-product from the dairy industry, as feedstock. The CW-derived PHBV copolyesters were first purified and then processed by solution electrospinning, yielding fibers of approximately 2 mu m in cross-section in all cases. The resultant electrospun PHBV mats were, thereafter, post-processed by annealing at different temperatures, below their maximum of melting, selected according to their 3HV content in order to obtain continuous films based on coalesced fibers, so-called biopapers. The resultant PHBV films were characterized in terms of their morphology, crystallinity, and mechanical and barrier properties to assess their potential application in food packaging. The CW-derived PHBV biopapers showed high contact transparency but a slightly yellow color. The fibers of the 20 mol % 3HV copolymer were seen to contain mostly poly(3-hydroxybutyrate) (PHB) crystals, the fibers of the 40 mol % 3HV copolymer a mixture of PHB and poly(3-hydroxyvalerate) (PHV) crystals and lowest crystallinity, and the fibers of the 60 mol % 3HV sample were mostly made of PHV crystals. To understand the interfiber coalesce process undergone by the materials during annealing, the crystalline morphology was also assessed by variable-temperature both combined small-angle and wide-angle X-ray scattering synchrotron and Fourier transform infrared experiments. From these experiments and, different from previously reported biopapers with lower 3HV contents, all samples were inferred to have a surface energy reduction mechanism for interfiber coalescence during annealing, which is thought to be activated by a temperature-induced decrease in molecular order. Due to their reduced crystallinity and molecular order, the CW-derived PHBV biopapers, especially the 40 mol % 3HV sample, were found to be more ductile and tougher. In terms of barrier properties, the three copolymers performed similarly to water and limonene, but to oxygen, the 40 mol % sample showed the highest relative permeability. Overall, the materials developed, which are compatible with the Circular Bioeconomy organic recycling strategy, can have an excellent potential as barrier interlayers or coatings of application interest in food packaging., This research work was funded by the H2020 EU project YPACK (reference number 773872) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21. B.M.-R. would like to acknowledge the MICI for her FPI fellowship (BES-2016-077972) and S.T.-G. for his MICI Juan de la Cierva-Incorporacion contract (IJCI-2016-29675). The ALBA Synchrotron is also acknowledged for the funding received through the project "Time-resolved Combined Wide-and Small-angle X-ray Scattering Characterization as a Function of Temperature of Electrospun Polyhydroxyalkanoates Derived from Biowaste" (2018022619). The authors would also like to thank the Unidad Asociada IATA(CSIC)-UJI in "Plastics Technology".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organocatalyzed closed-loop chemical recycling of thermo-compressed films of poly(ethylene furanoate)

  • Gabirondo, Elena
  • Meléndez-Rodríguez, Beatriz
  • Arnal, Carmen
  • Lagaron, Jose M.
  • Martínez de Ilarduya, Antxon
  • Sardon, Haritz
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Monomers obtained from renewable feedstocks have emerged as a sustainable alternative to petroleum derived polymers. One of the biomass derived polyesters that has recently been gaining attention as an alternative to petrochemical polyethylene terephtalate (PET) for food and beverage packaging applications is poly(ethylene furanoate) (PEF). However, similar to PET, PEF is not biodegradable or compostable and its end-of-life options must be thus considered to avoid contributing to the accumulation of plastic waste. In this manuscript, PEF films were first produced using thermo-compression, an industrially relevant processing method, and their thermal, mechanical, and barrier properties were determined and compared to those of PET and other biopolyesters to ascertain their suitability for food packaging. Thereafter, the chemical glycolysis of PEF film waste was investigated using a sustainable and thermally stable acid-base organocatalyst. After succesfully deconstructing PEF into bis(2-hydroxyethyl)-furan-2,5-dicarboxylate (BHEF), the obtained BHEF diester was used to resynthesize PEF using the same catalyst to generate a new biopolyester with similar thermal properties to the virgin one in a closed-loop cycle., The authors thank for technical and human support provided by IZO-SGI SGIker of UPV/EHU and European funding (ERDF and ESF). Authors gratefully acknowledge financial support from Spanish Ministry of Science and Innovation (MICI) through projects MAT2017-83373-R and RTI 2018-097249-B-C21. S. T.-G. acknowledges MICI for the funding received during his previous Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) and his current Ramon y Cajal contract (RYC2019-027784-I). A. M. I. acknowledges Prof. Cor Koning for the SSP reactor donated to POL group of Barcelona. Authors also thank India Glycols Ltd for kindly supplying bio-EG.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Torrefaction of Coffee Husk Flour for the Development of Injection-Molded Green Composite Pieces of Polylactide with High Sustainability

  • Ortiz-Barajas, Diana L.
  • Arévalo-Prada, Johan A.
  • Rueda-Ordóñez, Yesid J.
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Coffee husk, a major lignocellulosic waste derived from the coffee industry, was first ground into flour of fine particles of approximately 90 mu m and then torrefied at 250 degrees C to make it more thermally stable and compatible with biopolymers. The resultant torrefied coffee husk flour (TCHF) was thereafter melt-compounded with polylactide (PLA) in contents from 20 to 50 wt% and the extruded green composite pellets were shaped by injection molding into pieces and characterized. Although the incorporation of TCHF reduced the ductility and toughness of PLA, filler contents of 20 wt% successfully yielded pieces with balanced mechanical properties in both tensile and flexural conditions and improved hardness. Contents of up to 30 wt% of TCHF also induced a nucleating effect that favored the formation of crystals of PLA, whereas the thermal degradation of the biopolyester was delayed by more than 7 degrees C. Furthermore, the PLA/TCHF pieces showed higher thermomechanical resistance and their softening point increased up to nearly 60 degrees C. Therefore, highly sustainable pieces were developed through the valorization of large amounts of coffee waste subjected to torrefaction. In the Circular Bioeconomy framework, these novel green composites can be used in the design of compostable rigid packaging and food contact disposables., This research work was funded by the Spanish Ministry of Science and Innovation (MICI), project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R, and by the Industrial University of Santander.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

  • Gabirondo, Elena
  • Sangroniz, Ainara
  • Etxeberria, Agustin
  • Sardon, Haritz
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Poly(hydroxy acids) have been gaining increasing attention in the search for novel sustainable materials to replace petrochemical polymers in packaging applications. Poly(hydroxy acids) are polyesters that are obtained using hydroxy acids as the starting materials, which are derived from renewable resources and biowaste. These biopolymers have attracted a lot of attention since some of them will be in the near future competitive in price to polyolefins, show excellent mechanical and barrier properties, and can be potentially recycled by physical and chemical routes. Most of the current poly(hydroxy acids) are mainly prepared by ring-opening polymerization (ROP) of cyclic monomers derived from hydroxy acids. However, their direct polymerization has received much less attention, while one of the advantages of hydroxy acids resides in the presence of an electrophile and a nucleophile in a single molecule that makes them ideal A-B type monomers for self-condensation. This review focuses on the preparation of poly(hydroxy acids) by the self-condensation polymerization of hydroxy acids. Moreover, their end-of-life options are also evaluated considering not only their biodegradability but also their potential to be chemically recycled, The authors thank the European Commission (EC) for financial support through the project SUSPOL-EJDH2020-ITN-2014-642671 and the Spanish Ministry of Science and Innovation (MICI) through the projects RTI2018-097249-B-C21, MAT2017-83373-R, and MAT-2016-78527-P. S. Torres-Giner also acknowledges MICI for his Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) and the financial support received during his stay at the Institute for Polymer Materials (POLYMAT)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Linen Processing By-Products for the Development of Injection-Molded Green Composite Pieces of Polylactide with Improved Performance

  • Agüero, Ángel
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This work reports the development and characterization of green composites based on polylactide (PLA) containing fillers and additives obtained from by-products or waste-streams from the linen processing industry. Flaxseed flour (FSF) was first produced by the mechanical milling of golden flaxseeds. The resultant FSF particles were melt-compounded at 30 wt% with PLA in a twin-screw extruder. Two multi-functionalized oils derived from linseed, namely epoxidized linseed oil (ELO) and maleinized linseed oil (MLO), were also incorporated during melt mixing at 2.5 and 5 parts per hundred resin (phr) of composite. The melt-compounded pellets were thereafter shaped into pieces by injection molding and characterized. Results showed that the addition of both multi-functionalized linseed oils successfully increased ductility, toughness, and thermal stability of the green composite pieces whereas water diffusion was reduced. The improvement achieved was related to both a plasticizing effect and, more interestingly, an enhancement of the interfacial adhesion between the biopolymer and the lignocellulosic particles by the reactive vegetable oils. The most optimal performance was attained for the MLO-containing green composite pieces, even at the lowest content, which was ascribed to the higher solubility of MLO with the PLA matrix. Therefore, the present study demonstrates the potential use of by-products or waste from flax (Linum usitatissimum L.) to obtain renewable raw materials of suitable quality to develop green composites with high performance for market applications such as rigid food packaging and food-contact disposable articles in the frame of the Circular Economy and Bioeconomy., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Injection-Molded Polylactide Pieces with High Toughness by the Addition of Lactic Acid Oligomer and Characterization of Their Shape Memory Behavior

  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Moraga, Giovanni
  • Rojas-Lema, Sandra Paola
[EN] This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% range, on the processing and properties of polylactide (PLA) pieces prepared by injection molding. The obtained results suggested that the here-tested OLA mainly performs as an impact modifier for PLA, showing a percentage increase in the impact strength of approximately 171% for the injection-molded pieces containing 15 wt% OLA. A slight plasticization was observed by the decrease of the glass transition temperature (T-g) of PLA of up to 12.5 degrees C. The OLA addition also promoted a reduction of the cold crystallization temperature (T-cc) of more than 10 degrees C due to an increased motion of the biopolymer chains and the potential nucleating effect of the short oligomer chains. Moreover, the shape memory behavior of the PLA samples was characterized by flexural tests with different deformation angles, that is, 15 degrees, 30 degrees, 60 degrees, and 90 degrees. The obtained results confirmed the extraordinary effect of OLA on the shape memory recovery (R-r) of PLA, which increased linearly as the OLA loading increased. In particular, the OLA-containing PLA samples were able to successfully recover over 95% of their original shape for low deformation angles, while they still reached nearly 70% of recovery for the highest angles. Therefore, the present OLA can be successfully used as a novel additive to improve the toughness and shape memory behavior of compostable packaging articles based on PLA in the new frame of the Circular Economy., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. L.Q.-C. wants to thank Generalitat Valenciana (GVA) for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812). D.L. thanks Universitat Politècnica de València (UPV) for the grant received through the PAID-01-18 program. S.T.-G. is recipient of a Juan de la Cierva contract (IJCI-2016-29675) from MICIU. S.R.-L. is recipient of a Santiago Grisolía contract (GRISOLIAP/2019/132) from GVA. J.I.-M. wants to thank UPV for an FPI grant PAID-01-19 (SP2019001). Microscopy services of UPV are acknowledged for their help in collecting and analyzing the microscopy images. Authors also thank Condensia Química S.A. for kindly supplying Glyoplast OLA 2.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Micro- and nanostructures of agave fructans to stabilize compounds of high biological value via electrohydrodynamic processing

  • Cruz-Salas, Carla N.
  • Prieto López, Cristina
  • Calderón-Santoyo, Montserrat
  • Lagarón Cabello, José María
  • Ragazzo Sánchez, Juan Arturo
This study focuses on the use of high degree of polymerization agave fructans (HDPAF) as a polymer matrix to encapsulate compounds of high biological value within micro- and nanostructures by electrohydrodynamic processing. In this work, β-carotene was selected as a model compound, due to its high sensitivity to temperature, light and oxygen. Ultrafine fibers from HDPAF were obtained via this technology. These fibers showed an increase in fiber diameter when containing β-carotene, an encapsulation efficiency (EE) of 95% and a loading efficiency (LE) of 85%. The thermogravimetric analysis (TGA) showed a 90 °C shift in the β-carotene decomposition temperature with respect to its independent analysis, evidencing the HDPAF thermoprotective effect. Concerning the HDPAF photoprotector effect, only 21% of encapsulated β-carotene was lost after 48 h, while non-encapsulated β-carotene oxidized completely after 24 h. Consequently, fructans could be a feasible alternative to replace synthetic polymers in the encapsulation of compounds of high biological value., This study was supported by the Consejo Nacional de Ciencia y Tecnoligía (CONACyT, Mexico) for the scholarship granted (Number 702624) to Carla Norma Cruz Salas; CYTED thematic network code 319RT0576 and Spanish Ministry of Science, Innovation and Universities (proyect code RTI2018-097249-B-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Injection-Molded Polylactide Pieces with High Toughness by the Addition of Lactic Acid Oligomer and Characterization of Their Shape Memory Behavior

  • Lascano, Diego
  • Moraga, Giovanni
  • Ivorra-Martinez, Juan
  • Rojas-Lema, Sandra
  • Torres Giner, Sergio
  • Balart, Rafael
  • Boronat, Teodomiro
  • Quiles-Carrillo, Luis
© 2019 by the authors., This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5–20 wt% range, on the processing and properties of polylactide (PLA) pieces prepared by injection molding. The obtained results suggested that the here-tested OLA mainly performs as an impact modifier for PLA, showing a percentage increase in the impact strength of approximately 171% for the injection-molded pieces containing 15 wt% OLA. A slight plasticization was observed by the decrease of the glass transition temperature (Tg) of PLA of up to 12.5 °C. The OLA addition also promoted a reduction of the cold crystallization temperature (Tcc) of more than 10 °C due to an increased motion of the biopolymer chains and the potential nucleating effect of the short oligomer chains. Moreover, the shape memory behavior of the PLA samples was characterized by flexural tests with different deformation angles, that is, 15°, 30°, 60°, and 90°. The obtained results confirmed the extraordinary effect of OLA on the shape memory recovery (Rr) of PLA, which increased linearly as the OLA loading increased. In particular, the OLA-containing PLA samples were able to successfully recover over 95% of their original shape for low deformation angles, while they still reached nearly 70% of recovery for the highest angles. Therefore, the present OLA can be successfully used as a novel additive to improve the toughness and shape memory behavior of compostable packaging articles based on PLA in the new frame of the Circular Economy., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanodroplets of Docosahexaenoic Acid-Enriched Algae Oil Encapsulated within Microparticles of Hydrocolloids by Emulsion Electrospraying Assisted by Pressurized Gas

  • Prieto López, Cristina
  • Lagarón Cabello, José María
© 2020 by the authors., Long chain polyunsaturated omega-3 fatty acids (PUFAs), namely eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), are important functional ingredients due to their well-documented health benefits, but highly susceptible to oxidation. One of the most promising approaches to preserve bioactives is their encapsulation within protective matrices. In this paper, an innovative high throughput encapsulation technique termed as emulsion electrospraying assisted by pressurized gas (EAPG) was used to encapsulate at room temperature nanodroplets of algae oil into two food hydrocolloids, whey protein concentrate and maltodextrin. Spherical encapsulating particles with sizes around 5 µm were obtained, where the oil was homogeneously distributed in nanometric cavities with sizes below 300 nm. Peroxide values under 5 meq/kg, demonstrated that the oil did not suffer from oxidation during the encapsulation process carried out at room temperature. An accelerated stability assay against oxidation under strong UV light was performed to check the protective capacity of the different encapsulating materials. While particles made from whey protein concentrate showed good oxidative stability, particles made from maltodextrin were more susceptible to secondary oxidation, as determined by a methodology put forward in this study based on ATR-FTIR spectroscopy. Further organoleptic testing performed with the encapsulates in a model food product, i.e., milk powder, suggested that the lowest organoleptic impact was seen for the encapsulates made from whey protein concentrate. The obtained results demonstrate the potential of the EAPG technology using whey protein concentrate as the encapsulating matrix, for the stabilization of sensitive bioactive compounds., This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21), the Valencian Innovation Agency (AVI) BIOENCAP project (reference number INNCAD00-18-31), H2020 EU FODIAC project (reference number 778388) and the H2020 EU projects CAPSULTEK (reference number 873827) and YPACK (reference number 773872)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encapsulation of β-Carotene by Emulsion Electrospraying Using Deep Eutectic Solvents

  • Basar, Ahmet Ozan
  • Prieto López, Cristina
  • Durand, Erwann
  • Villeneuve, Pierre
  • Sasmazel, Hilal Turkoglu
  • Lagarón Cabello, José María
© 2020 by the authors., The encapsulation β-carotene in whey protein concentrate (WPC) capsules through the emulsion electrospraying technique was studied, using deep eutectic solvents (DES) as solvents. These novel solvents are characterized by negligible volatility, a liquid state far below 0 °C, a broad range of polarity, high solubilization power strength for a wide range of compounds, especially poorly water-soluble compounds, high extraction ability, and high stabilization ability for some natural products. Four DES formulations were used, based on mixtures of choline chloride with water, propanediol, glucose, glycerol, or butanediol. β-Carotene was successfully encapsulated in a solubilized form within WPC capsules; as a DES formulation with choline chloride and butanediol, the formulation produced capsules with the highest carotenoid loading capacity. SEM micrographs demonstrated that round and smooth capsules with sizes around 2 µm were obtained. ATR-FTIR results showed the presence of DES in the WPC capsules, which indirectly anticipated the presence of β-carotene in the WPC capsules. Stability against photo-oxidation studies confirmed the expected presence of the bioactive and revealed that solubilized β-carotene loaded WPC capsules presented excellent photo-oxidation stability compared with free β-carotene. The capsules developed here clearly show the significant potential of the combination of DES and electrospraying for the encapsulation and stabilization of highly insoluble bioactive compounds., This research was funded by the COST Action FP1405 (STSM reference number 41084), the MICIU project (RTI-2018-097249-B-C21), the Valencian Innovation Agency (AVI) BIOENCAP project (reference number INNCAD00-18-31), the H2020 EU FODIAC project (reference number 778388), and the H2020 EU projects CAPSULTEK (reference number 873827)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun Active Biopapers of Food Waste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with Short-Term and Long-Term Antimicrobial Performance

  • Figueroa-Lopez, Kelly J.
  • Torres-Giner, Sergio
  • Enescu, Daniela
  • Cabedo, Luis
  • Cerqueira, Miguel A.
  • Pastrana, Lorenzo
  • Lagarón Cabello, José María
© 2020 by the authors., This research reports about the development by electrospinning of fiber-based films made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from fermented fruit waste, so-called bio-papers, with enhanced antimicrobial performance. To this end, different combinations of oregano essential oil (OEO) and zinc oxide nanoparticles (ZnONPs) were added to PHBV solutions and electrospun into mats that were, thereafter, converted into homogeneous and continuous films of ~130 μm. The morphology, optical, thermal, mechanical properties, crystallinity, and migration into food simulants of the resultant PHBV-based bio-papers were evaluated and their antimicrobial properties were assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in both open and closed systems. It was observed that the antimicrobial activity decreased after 15 days due to the release of the volatile compounds, whereas the bio-papers filled with ZnONPs showed high antimicrobial activity for up to 48 days. The electrospun PHBV biopapers containing 2.5 wt% OEO + 2.25 wt% ZnONPs successfully provided the most optimal activity for short and long periods against both bacteria., The Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the EU H2020 YPACK (reference number 773872) and FODIAC (MSCA-RISE-2017-778388) projects funded this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Use of Gallic Acid as a Potential Natural Antioxidant and Ultraviolet Light Stabilizer in Cast-Extruded Bio-Based High-Density Polyethylene Films

  • Quiles Carrillo, Luis
  • Montava-Jordà, Sergi
  • Boronat, Teodomiro
  • Sammon, Chris
  • Torres Giner, Sergio
This study originally explores the use of gallic acid (GA) as a natural additive in bio-based high-density polyethylene (bio-HDPE) formulations. Thus, bio-HDPE was first melt-compounded with two different loadings of GA, namely 0.3 and 0.8 parts per hundred resin (phr) of biopolymer, by twin-screw extrusion and thereafter shaped into films using a cast-roll machine. The resultant bio-HDPE films containing GA were characterized in terms of their mechanical, morphological, and thermal performance as well as ultraviolet (UV) light stability to evaluate their potential application in food packaging. The incorporation of 0.3 and 0.8 phr of GA reduced the mechanical ductility and crystallinity of bio-HDPE, but it positively contributed to delaying the onset oxidation temperature (OOT) by 36.5 °C and nearly 44 °C, respectively. Moreover, the oxidation induction time (OIT) of bio-HDPE, measured at 210 °C, was delayed for up to approximately 56 and 240 min, respectively. Furthermore, the UV light stability of the bio-HDPE films was remarkably improved, remaining stable for an exposure time of 10 h even at the lowest GA content. The addition of the natural antioxidant slightly induced a yellow color in the bio-HDPE films and it also reduced their transparency, although a high contact transparency level was maintained. This property can be desirable in some packaging materials for light protection, especially UV radiation, which causes lipid oxidation in food products. Therefore, GA can successfully improve the thermal resistance and UV light stability of green polyolefins and will potentially promote the use of natural additives for sustainable food packaging applications., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Different Compatibilization Strategies to Improve the Performance of Injection-Molded Green Composite Pieces Made of Polylactide Reinforced with Short Flaxseed Fibers

  • Agüero, Ángel
  • Garcia-Sanoguera, David
  • Lascano, Diego
  • Rojas-Lema, Sandra
  • Ivorra-Martinez, Juan
  • Fenollar, Octavio
  • Torres-Giner, Sergio
© 2020 by the authors., Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfully compounded by twin-screw extrusion (TSE) and subsequently shaped into pieces by injection molding. The linen waste derived FFs were subjected to an alkalization pretreatment to remove impurities, improve the fiber surface quality, and make the fibers more hydrophobic. The alkali-pretreated FFs successfully reinforced PLA, leading to green composite pieces with higher mechanical strength. However, the pieces also showed lower ductility and toughness and the lignocellulosic fibers easily detached during fracture due to the absence or low interfacial adhesion with the biopolyester matrix. Therefore, four different compatibilization strategies were carried out to enhance the fiber–matrix interfacial adhesion. These routes consisted on the silanization of the alkalized FFs with a glycidyl silane, namely (3-glycidyloxypropyl) trimethoxysilane (GPTMS), and the reactive extrusion (REX) with three compatibilizers, namely a multi-functional epoxy-based styrene-acrylic oligomer (ESAO), a random copolymer of poly(styrene-co-glycidyl methacrylate) (PS-co-GMA), and maleinized linseed oil (MLO). The results showed that all the here-tested compatibilizers improved mechanical strength, ductility, and toughness as well as the thermal stability and thermomechanical properties of the green composite pieces. The highest interfacial adhesion was observed in the green composite pieces containing the silanized fibers. Interestingly, PS-co-GMA and, more intensely, ESAO yielded the pieces with the highest mechanical performance due to the higher reactivity of these additives with both composite components and their chain-extension action, whereas MLO led to the most ductile pieces due to its secondary role as plasticizer for PLA., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Properties of Thermo-Compressed Polylactide Films for Food Packaging Applications by Individual and Combined Additions of Lactic Acid Oligomer and Halloysite Nanotubes

  • Rojas-Lema, Sandra
  • Quiles Carrillo, Luis
  • Garcia-Garcia, Daniel
  • Meléndez-Rodríguez, Beatriz
  • Balart, Rafael
  • Torres Giner, Sergio
© 2020 by the authors, In this work, films of polylactide (PLA) prepared by extrusion and thermo-compression were plasticized with oligomer of lactic acid (OLA) at contents of 5, 10, and 20 wt%. The PLA sample containing 20 wt% of OLA was also reinforced with 3, 6, and 9 parts per hundred resin (phr) of halloysite nanotubes (HNTs) to increase the mechanical strength and thermal stability of the films. Prior to melt mixing, ultrasound-assisted dispersion of the nanoclays in OLA was carried out at 100 °C to promote the HNTs dispersion in PLA and the resultant films were characterized with the aim to ascertain their potential in food packaging. It was observed that either the individual addition of OLA or combined with 3 phr of HNTs did not significantly affect the optical properties of the PLA films, whereas higher nanoclay contents reduced lightness and induced certain green and blue tonalities. The addition of 20 wt% of OLA increased ductility of the PLA film by nearly 75% and also decreased the glass transition temperature (Tg) by over 18 °C. The incorporation of 3 phr of HNTs into the OLA-containing PLA films delayed thermal degradation by 7 °C and additionally reduced the permeabilities to water and limonene vapors by approximately 8% and 47%, respectively. Interestingly, the highest barrier performance was attained for the unfilled PLA film plasticized with 10 wt% of OLA, which was attributed to a crystallinity increase and an effect of “antiplasticization”. However, loadings of 6 and 9 phr of HNTs resulted in the formation of small aggregates that impaired the performance of the blend films. The here-attained results demonstrates that the properties of ternary systems of PLA/OLA/HNTs can be tuned when the plasticizer and nanofiller contents are carefully chosen and the resultant nanocomposite films can be proposed as a bio-sourced alternative for compostable packaging applications., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical Recycling of Partially Bio-Based and Recycled Polyethylene Terephthalate Blends by Reactive Extrusion with Poly(styrene-co-glycidyl methacrylate)

  • Montava-Jordà, Sergi
  • Lascano, Diego
  • Quiles-Carrillo, Luis
  • Montanes, Néstor
  • Boronat, Teodomiro
  • Martínez-Sanz, Antonio V.
  • Ferrándiz-Bou, Santiago
  • Torres-Giner, Sergio
In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15–45 wt% with recycled polyethylene terephthalate (r-PET) obtained from remnants of the injection blowing process of contaminant-free food-use bottles. The resultant compounded materials were thereafter shaped into pieces by injection molding for characterization. Poly(styrene-co-glycidyl methacrylate) (PS-co-GMA) was added at 1–5 parts per hundred resin (phr) of polyester blend during the extrusion process to counteract the ductility and toughness reduction that occurred in the bio-PET pieces after the incorporation of r-PET. This random copolymer effectively acted as a chain extender in the polyester blend, resulting in injection-molded pieces with slightly higher mechanical resistance properties and nearly the same ductility and toughness than those of neat bio-PET. In particular, for the polyester blend containing 45 wt% of r-PET, elongation at break (εb) increased from 10.8% to 378.8% after the addition of 5 phr of PS-co-GMA, while impact strength also improved from 1.84 kJ·m−2 to 2.52 kJ·m−2. The mechanical enhancement attained was related to the formation of branched and larger macromolecules by a mechanism of chain extension based on the reaction of the multiple glycidyl methacrylate (GMA) groups present in PS-co-GMA with the hydroxyl (–OH) and carboxyl (–COOH) terminal groups of both bio-PET and r-PET. Furthermore, all the polyester blend pieces showed thermal and dimensional stabilities similar to those of neat bio-PET, remaining stable up to more than 400 °C. Therefore, the use low contents of the tested multi-functional copolymer can successfully restore the properties of bio-based but non-biodegradable polyesters during melt reprocessing with their recycled petrochemical counterparts and an effective mechanical recycling is achieved., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanomaterials to enhance food quality, safety, and health impact

  • Torres Giner, Sergio
  • Prieto López, Cristina
  • Lagarón Cabello, José María
This article belongs to the Special Issue Nanomaterials to Enhance Food Quality, Safety, and Health Impact., Food quality and safety are key aspects to guarantee that foods reach consumers in optimal conditions from the point of view of freshness and microbiology. Nanotechnology offers significant potential to secure or even enhance these aspects. Novel technologies, such as nanofabrication and nanoencapsulation, can provide new added value solutions for the fortification of foods with bioactives and targeted controlled release in the gut. Nanomaterials can also support food preservation aspects by being added directly into a food matrix or into food contact materials such as packaging. Thus, nanomaterials can be leveraged in the form of nanocomposites in food packaging design by melt compounding, solvent casting, lamination or electrohydrodynamic processing (EHDP) to promote passive, active, and even bioactive properties such as barrier, antimicrobial, antioxidant, and oxygen scavenging roles and the controlled release of functional ingredients. These attributes can be exerted either by the intended or non-intended migration of the nanomaterials or by the active substances they may carry. Lastly, nanomaterials can be advantageously applied to provide unique opportunities in Circular Bioeconomy strategies in relation to the valorization of, for instance, agro-industrial wastes and food processing by-products., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project number RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of the Mechanical and Thermal Properties of Injection-Molded Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/Hydroxyapatite Nanoparticles Parts for Use in Bone Tissue Engineering

  • Ivorra-Martinez, Juan
  • Quiles-Carrillo, Luis
  • Boronat, Teodomiro
  • Torres-Giner, Sergio
  • Covas, José A.
© 2020 by the authors., In the present study, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] was reinforced with hydroxyapatite nanoparticles (nHA) to produce novel nanocomposites for potential uses in bone reconstruction. Contents of nHA in the 2.5–20 wt % range were incorporated into P(3HB-co-3HHx) by melt compounding and the resulting pellets were shaped into parts by injection molding. The addition of nHA improved the mechanical strength and the thermomechanical resistance of the microbial copolyester parts. In particular, the addition of 20 wt % of nHA increased the tensile (Et) and flexural (Ef) moduli by approximately 64% and 61%, respectively. At the highest contents, however, the nanoparticles tended to agglomerate, and the ductility, toughness, and thermal stability of the parts also declined. The P(3HB-co-3HHx) parts filled with nHA contents of up to 10 wt % matched more closely the mechanical properties of the native bone in terms of strength and ductility when compared with metal alloys and other biopolymers used in bone tissue engineering. This fact, in combination with their biocompatibility, enables the development of nanocomposite parts to be applied as low-stress implantable devices that can promote bone reconstruction and be reabsorbed into the human body., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R and the POLISABIO program with grant number 2019-A02., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microencapsulation of Copper(II) Sulfate in Ionically Cross-Linked Chitosan by Spray Drying for the Development of Irreversible Moisture Indicators in Paper Packaging

  • Rojas-Lema, Sandra
  • Terol, Jorge
  • Fages, Eduardo
  • Balart, Rafael
  • Quiles-Carrillo, Luis
  • Prieto López, Cristina
  • Torres Giner, Sergio
© 2020 by the authors, Copper(II) sulfate-loaded chitosan microparticles were herein prepared using ionic cross-linking with sodium tripolyphosphate (STPP) followed by spray drying. The microencapsulation process was optimal using an inlet temperature of 180 °C, a liquid flow-rate of 290 mL/h, an aspiration rate of 90%, and an atomizing gas flow-rate of 667 nL/h. Chitosan particles containing copper(II) sulfate of approximately 4 µm with a shrunken-type morphology were efficiently attained and, thereafter, fixated on a paper substrate either via cross-linking with STPP or using a chitosan hydrogel. The latter method led to the most promising system since it was performed at milder conditions and the original paper quality was preserved. The developed cellulose substrates were reduced and then exposed to different humidity conditions and characterized using colorimetric measurements in order to ascertain their potential as irreversible indicators for moisture detection. The results showed that the papers coated with the copper(II) sulfate-containing chitosan microparticles were successfully able to detect ambient moisture shown by the color changes of the coatings from dark brown to blue, which can be easily seen with the naked eye. Furthermore, the chitosan microparticles yielded no cytotoxicity in an in vitro cell culture experiment. Therefore, the cellulose substrates herein developed hold great promise in paper packaging as on-package colorimetric indicators for monitoring moisture in real time., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Torrefaction of Coffee Husk Flour for the Development of Injection-Molded Green Composite Pieces of Polylactide with High Sustainability

  • Ortiz-Barajas, Diana L.
  • Arévalo-Prada, Johan A.
  • Fenollar, Octavio
  • Rueda-Ordóñez, Yesid J.
  • Torres-Giner, Sergio
© 2020 by the authors., Coffee husk, a major lignocellulosic waste derived from the coffee industry, was first ground into flour of fine particles of approximately 90 µm and then torrefied at 250 °C to make it more thermally stable and compatible with biopolymers. The resultant torrefied coffee husk flour (TCHF) was thereafter melt-compounded with polylactide (PLA) in contents from 20 to 50 wt% and the extruded green composite pellets were shaped by injection molding into pieces and characterized. Although the incorporation of TCHF reduced the ductility and toughness of PLA, filler contents of 20 wt% successfully yielded pieces with balanced mechanical properties in both tensile and flexural conditions and improved hardness. Contents of up to 30 wt% of TCHF also induced a nucleating effect that favored the formation of crystals of PLA, whereas the thermal degradation of the biopolyester was delayed by more than 7 °C. Furthermore, the PLA/TCHF pieces showed higher thermomechanical resistance and their softening point increased up to nearly 60 °C. Therefore, highly sustainable pieces were developed through the valorization of large amounts of coffee waste subjected to torrefaction. In the Circular Bioeconomy framework, these novel green composites can be used in the design of compostable rigid packaging and food contact disposables., This research work was funded by the Spanish Ministry of Science and Innovation (MICI), project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R, and by the Industrial University of Santander., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Monolayers Containing Eugenol and Their Application in Multilayer Antimicrobial Food Packaging

  • Figueroa López, Kelly J.
  • Cabedo, Luis
  • Lagarón Cabello, José María
  • Torres Giner, Sergio
In this research, different contents of eugenol in the 2.5–25 wt.% range were first incorporated into ultrathin fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by electrospinning and then subjected to annealing to obtain antimicrobial monolayers. The most optimal concentration of eugenol in the PHBV monolayer was 15 wt.% since it showed high electrospinnability and thermal stability and also yielded the highest bacterial reduction against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). This eugenol-containing monolayer was then selected to be applied as an interlayer between a structural layer made of a cast-extruded poly(3-hydroxybutyrate) (PHB) sheet and a commercial PHBV film as the food contact layer. The whole system was, thereafter, annealed at 160°C for 10 s to develop a novel multilayer active packaging material. The resultant multilayer showed high hydrophobicity, strong adhesion and mechanical resistance, and improved barrier properties against water vapor and limonene vapors. The antimicrobial activity of the multilayer structure was also evaluated in both open and closed systems for up to 15 days, showing significant reductions (R ≥ 1 and < 3) for the two strains of food-borne bacteria. Higher inhibition values were particularly attained against S. aureus due to the higher activity of eugenol against the cell membrane of Gram positive (G+) bacteria. The multilayer also provided the highest antimicrobial activity for the closed system, which better resembles the actual packaging and it was related to the headspace accumulation of the volatile compounds. Hence, the here-developed multilayer fully based on polyhydroxyalkanoates (PHAs) shows a great deal of potential for antimicrobial packaging applications using biodegradable materials to increase both quality and safety of food products., This research was funded by the Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the H2020 EU project YPACK (reference number 773872)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of Municipal Biowaste into Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers for Food Packaging Applications

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Lorini, L.
  • Valentino, F.
  • Sammon, C.
  • Cabedo, Luis
  • Lagarón Cabello, José María
The present study reports on the production and characterization of a new biopackaging material made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from municipal biowaste (MBW) and produced by the mixed bacterial culture technology. After purification and extraction, the MBW-derived PHBV was processed by electrospinning to yield defect-free ultrathin fibers, which were thermally post-treated. Annealing at 130 °C, well below the biopolymer’s melting temperature (Tm), successfully yielded a continuous film resulting from coalescence of the electrospun fibrillar morphology, the so-called biopaper, exhibiting enhanced optical and color properties compared to traditional melt compounding routes. The crystallinity and crystalline morphology were comprehensively studied as a function of temperature by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and combined time-resolved synchrotron small- and wide-angle X-ray scattering (SAXS and WAXS) experiments, which clearly indicated that the molecular order within the copolyester was improved up to a maximum at 130 °C, and then it decreased at the biopolymer’s Tm. It was hypothesized that by annealing at the temperature at which the thermally induced molecular order is maximized, the fibers generated sufficient mobility to align alongside, hence reducing surface energy and porosity. The data suggest that this material shows a good balance between enhanced mechanical and improved barrier properties to vapors and gases in comparison to traditional paper and other currently used petroleum-derived polymers, thus presenting significant potential to be part of innovative food biopackaging designs for the protection and preservation of foods in a circular bioeconomy scenario., The Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and EU projects H2020 YPACK (reference number 773872) and H2020 USABLE (reference number 836884) are acknowledged for funding support. B.M.-R. and S.T.-G. would also like to thank MICI for the FPI fellowship (BES-2016-077972) and the Juan de la Cierva–Incorporación contract (IJCI-2016-29675), respectively. The ALBA Synchrotron, Spain, is also acknowledged for the funding received through the project proposal 2018022619. The authors also thank the “Unidad Asociada CSIC-UJI in Polymers Technology”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Active Barrier Multilayer Films Based on Electrospun Antimicrobial Hot-Tack Food Waste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Cellulose Nanocrystal Interlayers

  • Figueroa-Lopez, Kelly J.
  • Torres Giner, Sergio
  • Angulo, Inmaculada
  • Pardo Figuérez, María
  • Escuin, Jose Manuel
  • Bourbon, Ana Isabel
  • Cabedo, Luis
  • Nevo, Yuval
  • Cerqueira, Miguel A.
  • Lagarón Cabello, José María
© 2020 by the authors., Active multilayer films based on polyhydroxyalkanoates (PHAs) with and without high barrier coatings of cellulose nanocrystals (CNCs) were herein successfully developed. To this end, an electrospun antimicrobial hot-tack layer made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from cheese whey, a by-product from the dairy industry, was deposited on a previously manufactured blown film of commercial food contact PHA-based resin. A hybrid combination of oregano essential oil (OEO) and zinc oxide nanoparticles (ZnONPs) were incorporated during the electrospinning process into the PHBV nanofibers at 2.5 and 2.25 wt%, respectively, in order to provide antimicrobial properties. A barrier CNC coating was also applied by casting from an aqueous solution of nanocellulose at 2 wt% using a rod at 1m/min. The whole multilayer structure was thereafter assembled in a pilot roll-to-roll laminating system, where the blown PHA-based film was located as the outer layers while the electrospun antimicrobial hot-tack PHBV layer and the barrier CNC coating were placed as interlayers. The resultant multilayer films, having a final thickness in the 130–150 µm range, were characterized to ascertain their potential in biodegradable food packaging. The multilayers showed contact transparency, interlayer adhesion, improved barrier to water and limonene vapors, and intermediate mechanical performance. Moreover, the films presented high antimicrobial and antioxidant activities in both open and closed systems for up to 15 days. Finally, the food safety of the multilayers was assessed by migration and cytotoxicity tests, demonstrating that the films are safe to use in both alcoholic and acid food simulants and they are also not cytotoxic for Caco-2 cells., The Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the EU H2020 YPACK (reference number 773872) projects funded this research. K.J.F.-L. is a recipient of a Santiago Grisolía research contract (0001426013N810001A201) of Generalitat Valenciana (GVA). S.T.-G. acknowledges the Juan de la Cierva–Incorporación contract (IJCI-2016-29675). The authors would also like to thank the Unidad Asociada IATA-UJI in “Plastics Technology”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing hygroscopic stability of agave fructans capsules obtained by electrospraying

  • Ramos-Hernández, Jorge A.
  • Lagarón Cabello, José María
  • Calderón-Santoyo, Montserrat
  • Prieto López, Cristina
  • Ragazzo Sánchez, Juan Arturo
“This is a post-peer-review, pre-copyedit version of an article published in Journal of Food Science and Technology. The final authenticated version is available online at: http://dx.doi.org/10.1007/s13197-020-04672-3”, In this work, different whey protein (WP) ratios (5, 10, 20, 30, 40 and 50% w/w) were added as stabilizers to high degree of polymerization Agave fructans (HDPAF) capsules to decrease the hygroscopicity. Results showed that the WP and HDPAF in 1:520:80 ratio (20/80 w/w) decreased significantly the hygroscopicity of capsules from 12.19 to 8.34%. Additionally, this polymeric mixture was assessed for the encapsulation of sea grape (Coccoloba uvifera L.) leaf extract was achieved by via electrospray, using this biopolymers mixture. Scanning electron microscopy (SEM) images exhibited spherical particles with sizes from 655 to 7250 nm. The thermal stability of encapsulated extract was demonstrated by via thermogravimetric analysis. The in vitro release study in simulated stomach (0–180 min) and intestine conditions (0–300 min) showed the controlled release of the controlled release of the encapsulated extract. The encapsulated extract and its bioavailability in simulating the stomach (0–180 min) and small intestine (0–300 min) Therefore, HDPAF–WP is a viable option as an encapsulating matrix susceptible to be used in the food, pharmaceutical, and cosmetic industries., This study was supported by the Consejo Nacional de Ciencia y Tecnología (CONACyT, Mexico) for the scholarship granted (Number 702624) to Jorge Alberto Ramos-Hernández; CYTED thematic network code 319RT0576 and Spanish Ministry of Science, Innovation and Universities (Project Code RTI2018-097249-B-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organocatalyzed closed-loop chemical recycling of thermo-compressed films of poly(ethylene furanoate)

  • Gabirondo, Elena
  • Meléndez-Rodríguez, Beatriz
  • Arnal, Carmen
  • Lagarón Cabello, José María
  • Martínez de Ilarduya, Antxon
  • Sardon, Haritz
  • Torres Giner, Sergio
Monomers obtained from renewable feedstocks have emerged as a sustainable alternative to petroleum derived polymers. One of the biomass derived polyesters that has recently been gaining attention as an alternative to petrochemical polyethylene terephtalate (PET) for food and beverage packaging applications is poly(ethylene furanoate) (PEF). However, similar to PET, PEF is not biodegradable or compostable and its end-of-life options must be thus considered to avoid contributing to the accumulation of plastic waste. In this manuscript, PEF films were first produced using thermo-compression, an industrially relevant processing method, and their thermal, mechanical, and barrier properties were determined and compared to those of PET and other biopolyesters to ascertain their suitability for food packaging. Thereafter, the chemical glycolysis of PEF film waste was investigated using a sustainable and thermally stable acid–base organocatalyst. After succesfully deconstructing PEF into bis(2-hydroxyethyl)-furan-2,5-dicarboxylate (BHEF), the obtained BHEF diester was used to resynthesize PEF using the same catalyst to generate a new biopolyester with similar thermal properties to the virgin one in a closed-loop cycle., The authors thank for technical and human support provided by IZO-SGI SGIker of UPV/EHU and European funding (ERDF and ESF). Authors gratefully acknowledge financial support from Spanish Ministry of Science and Innovation (MICI) through projects MAT2017-83373-R and RTI 2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Oxygen-Barrier Multilayer Films Based on Polyhydroxyalkanoates and Cellulose Nanocrystals

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Angulo, Inmaculada
  • Pardo Figuérez, María
  • Hilliou, Loïc
  • Escuin, Jose M.
  • Cabedo, Luis
  • Nevo, Yuval
  • Prieto López, Cristina
  • Lagarón Cabello, José María
This study reports on the development and characterization of organic recyclable high-oxygen-barrier multilayer films based on different commercial polyhydroxyalkanoate (PHA) materials, including a blend with commercial poly(butylene adipate-co-terephthalate) (PBAT), which contained an inner layer of cellulose nanocrystals (CNCs) and an electrospun hot-tack adhesive layer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from cheese whey (CW). As a result, the full multilayer structures were made from bio-based and/or compostable materials. A characterization of the produced films was carried out in terms of morphological, optical, mechanical, and barrier properties with respect to water vapor, limonene, and oxygen. Results indicate that the multilayer films exhibited a good interlayer adhesion and contact transparency. The stiffness of the multilayers was generally improved upon incorporation of the CNC interlayer, whereas the enhanced elasticity of the blend was reduced to some extent in the multilayer with CNCs, but this was still much higher than for the neat PHAs. In terms of barrier properties, it was found that 1 µm of the CNC interlayer was able to reduce the oxygen permeance between 71% and 86%, while retaining the moisture and aroma barrier of the control materials., This research work was funded by the H2020 EU project YPACK (reference number 773872) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Blends of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) with Fruit Pulp Biowaste Derived Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate-co-3-Hydroxyhexanoate) for Organic Recycling Food Packaging

  • Meléndez-Rodríguez, Beatriz
  • Torres-Giner, Sergio
  • Reis, Maria A.M.
  • Silva, Fernando
  • Matos, Mariana
  • Cabedo, Luis
  • Lagarón Cabello, José María
In the present study, a new poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) [P(3HB-co-3HV-co-3HHx)] terpolyester with approximately 68 mol% of 3-hydroxybutyrate (3HB), 17 mol% of 3-hydroxyvalerate (3HV), and 15 mol% of 3-hydroxyhexanoate (3HHx) was obtained via the mixed microbial culture (MMC) technology using fruit pulps as feedstock, a processing by-product of the juice industry. After extraction and purification performed in a single step, the P(3HB-co-3HV-co-3HHx) powder was melt-mixed, for the first time, in contents of 10, 25, and 50 wt% with commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Thereafter, the resultant doughs were thermo-compressed to obtain highly miscible films with good optical properties, which can be of interest in rigid and semirigid organic recyclable food packaging applications. The results showed that the developed blends exhibited a progressively lower melting enthalpy with increasing the incorporation of P(3HB-co-3HV-co-3HHx), but retained the PHB crystalline morphology, albeit with an inferred lower crystalline density. Moreover, all the melt-mixed blends were thermally stable up to nearly 240 °C. As the content of terpolymer increased in the blends, the mechanical response of their films showed a brittle-to-ductile transition. On the other hand, the permeabilities to water vapor, oxygen, and, more notably, limonene were seen to increase. On the overall, this study demonstrates the value of using industrial biowaste derived P(3HB-co-3HV-co-3HHx) terpolyesters as potentially cost-effective and sustainable plasticizing additives to balance the physical properties of organic recyclable polyhydroxyalkanoate (PHA)-based food packaging materials., This research was supported by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and by the EU H2020 BBI JU project USABLE PAKAGING (reference number 836884)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NMR analysis and triad sequence distributions of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

  • Cheng, H.N.
  • Biswas, Atanu
  • Vermillion, K.
  • Meléndez-Rodríguez, Beatriz
  • Lagarón Cabello, José María
Polyhydroxyalkanoates (PHAs) are considered promising “green” alternatives to synthetic polymers because they are bio-derived, biodegradable and biocompatible. The properties of bacterial PHA copolymers depend on their microstructures, which can be modified with the use of different fermentation processes and feed materials. Thus, it is desirable to have an improved testing method for the determination of PHA microstructures. In this work, a detailed NMR analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microstructure was made. Previously only two of the hydroxyvalerate 13C NMR peaks have been assigned at the triad level. In this work, three of the 13C hydroxyvalerate peaks and two of the hydroxybutyrate peaks were found to be split into four peaks each due to comonomer sequence effects. Using eight copolymer samples with a wide compositional range, we were able to assign all these peaks to B-centered and V-centered triad sequences. Through curve deconvolution, the triad intensities were determined. These triad sequence intensities can then be analyzed via both the first-order Markovian and two-component Bernoullian models to obtain more in-depth information on copolymer composition and comonomer reactivities., The authors would like to thank the Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the EU H2020 YPACK (reference number 773872) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and Characterization of Electrospun Biopapers of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Derived from Cheese Whey with Varying 3-Hydroxyvalerate Contents

  • Meléndez-Rodríguez, Beatriz
  • Reis, Maria A. M.
  • Carvalheira, Monica
  • Sammon, Chris
  • Cabedo, Luis
  • Torres-Giner, Sergio
  • Lagarón Cabello, José María
In the present study, three different newly developed copolymers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) with 20, 40, and 60 mol % contents in 3-hydroxyvalerate (3HV) were produced by the biotechnological process of mixed microbial cultures (MMCs) using cheese whey (CW), a by-product from the dairy industry, as feedstock. The CW-derived PHBV copolyesters were first purified and then processed by solution electrospinning, yielding fibers of approximately 2 μm in cross-section in all cases. The resultant electrospun PHBV mats were, thereafter, post-processed by annealing at different temperatures, below their maximum of melting, selected according to their 3HV content in order to obtain continuous films based on coalesced fibers, so-called biopapers. The resultant PHBV films were characterized in terms of their morphology, crystallinity, and mechanical and barrier properties to assess their potential application in food packaging. The CW-derived PHBV biopapers showed high contact transparency but a slightly yellow color. The fibers of the 20 mol % 3HV copolymer were seen to contain mostly poly(3-hydroxybutyrate) (PHB) crystals, the fibers of the 40 mol % 3HV copolymer a mixture of PHB and poly(3-hydroxyvalerate) (PHV) crystals and lowest crystallinity, and the fibers of the 60 mol % 3HV sample were mostly made of PHV crystals. To understand the interfiber coalesce process undergone by the materials during annealing, the crystalline morphology was also assessed by variable-temperature both combined small-angle and wide-angle X-ray scattering synchrotron and Fourier transform infrared experiments. From these experiments and, different from previously reported biopapers with lower 3HV contents, all samples were inferred to have a surface energy reduction mechanism for interfiber coalescence during annealing, which is thought to be activated by a temperature-induced decrease in molecular order. Due to their reduced crystallinity and molecular order, the CW-derived PHBV biopapers, especially the 40 mol % 3HV sample, were found to be more ductile and tougher. In terms of barrier properties, the three copolymers performed similarly to water and limonene, but to oxygen, the 40 mol % sample showed the highest relative permeability. Overall, the materials developed, which are compatible with the Circular Bioeconomy organic recycling strategy, can have an excellent potential as barrier interlayers or coatings of application interest in food packaging., This research work was funded by the H2020 EU project YPACK (reference number 773872) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21. B.M.-R. would like to acknowledge the MICI for her FPI fellowship (BES-2016-077972) and S.T.-G. for his MICI Juan de la Cierva–Incorporación contract (IJCI-2016-29675). The ALBA Synchrotron is also acknowledged for the funding received through the project “Time-resolved Combined Wide- and Small-angle X-ray Scattering Characterization as a Function of Temperature of Electrospun Polyhydroxyalkanoates Derived from Biowaste” (2018022619). The authors would also like to thank the Unidad Asociada IATA(CSIC)-UJI in “Plastics Technology”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Teruel Juanes, R.
  • Echegoyen, Yolanda
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
  • Ribes-Greus, Amparo
The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter – molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (ε′) and the dielectric loss tangent (tan δ) at wide ranges of frequency (from 10−2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two β-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric α-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the β-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol−1. The α-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva—Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and Characterization of Electrospun Fiber-Based Poly(ethylene-co-vinyl Alcohol) Films of Application Interest as High-Gas-Barrier Interlayers in Food Packaging

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Zavagna, L.
  • Sammon, C.
  • Cabedo, Luis
  • Prieto López, Cristina
  • Lagarón Cabello, José María
In the present study, poly(ethylene-co-vinyl alcohol) with 44 mol % ethylene content (EVOH44) was managed to be processed, for the first time, by electrospinning assisted by the coaxial technology of solvent jacket. In addition to this, different suspensions of cellulose nanocrystals (CNCs), with contents ranging from 0.1 to 1.0 wt %, were also electrospun to obtain hybrid bio-/non-bio nanocomposites. The resultant fiber mats were thereafter optimally annealed to promote interfiber coalescence at 145 °C, below the EVOH44 melting point, leading to continuous transparent fiber-based films. The morphological analysis revealed the successful distribution of CNCs into EVOH44 up to contents of 0.5 wt %. The incorporation of CNCs into the ethylene-vinyl alcohol copolymer caused a decrease in the crystallization and melting temperatures (TC and Tm) of about 12 and 7 °C, respectively, and also crystallinity. However, the incorporation of CNCs led to enhanced thermal stability of the copolymer matrix for a nanofiller content of 1.0 wt %. Furthermore, the incorporation of 0.1 and 0.5 wt % CNCs produced increases in the tensile modulus (E) of ca. 38% and 28%, respectively, but also yielded a reduction in the elongation at break and toughness. The oxygen barrier of the hybrid nanocomposite fiber-based films decreased with increasing the CNCs content, but they were seen to remain high barrier, especially in the low relative humidity (RH) regime, i.e., at 20% RH, showing permeability values lower than 0.6 × 10−20 m3·m·m−2·Pa−1·s−1. In general terms, an optimal balance in physical properties was found for the hybrid copolymer composite with a CNC loading of 0.1 wt %. On the overall, the present study demonstrates the potential of annealed electrospun fiber-based high-barrier polymers, with or without CNCs, to develop novel barrier interlayers to be used as food packaging constituents., This research work was funded by the EU H2020 BBI JU project USABLE PAKAGING (reference number 836884) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioavailability enhancement of nanostructured microparticles of carvedilol

  • Prieto López, Cristina
  • Evtoski, Zoran
  • Pardo Figuérez, María
  • Lagarón Cabello, José María
A high throughput encapsulation technique termed as electrospraying assisted by pressurized gas technology (EAPG) was used to produce nano-within-micro structures of a Biopharmaceutics Classification System (BCS) Class II model drug. Carvedilol is a lipid soluble compound, poorly absorbed in the gastrointestinal tract. The produced formulations were characterized in terms of morphology, crystallinity, in vitro dissolution test, in vitro Caco-2 cells permeability and in vivo pharmacokinetics in rats. Spherical microparticles with a carvedilol loading of 80% were produced with sizes around 4 μm. DLS and TEM suggested that carvedilol is released in the form of nanoparticles of controlled size when the microparticles are put in solution, and WAXS and DSC confirmed that carvedilol was in an amorphous state. In vitro dissolution tests showed that the produced microparticles dissolved 4-fold faster than the commercial carvedilol in the first 30 min. The apparent permeability in Caco-2 cells of the produced formulations was approximately 2.5-fold higher than the apparent permeability of the commercial carvedilol. The preliminary pharmacokinetic assay suggested a reduction in 2 h of the Cmax for the prepared formulations, but due to the high variability observed, the results need to be confirmed in further studies. This work showed the potential of nanostructured microparticles of an API via EAPG to increase dissolution rate and hence the bioavailability of a BCS Class II drug., This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21), the Valencian Innovation Agency BIOENCAP project (reference number INNCAD00-18-31), the H2020 EU projects FODIAC (reference number 778388) CAPSULTEK (reference number 873827) and the CYTED thematic network (code 319RT0576)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Super-repellent paper coated with electrospun biopolymers and electrosprayed silica of interest in food packaging applications

  • Lafraya Aguado, Álvaro
  • Prieto López, Cristina
  • Pardo Figuérez, María
  • Chiva, Alberto
  • Lagarón Cabello, José María
In the current work, a super-repellent biopaper suitable for food contact applications was developed. To do this, three different kinds of biopolymers, namely polylactide (PLA), poly(ε-caprolactone) (PCL), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), and hydrophobic silica microparticles (SiO2), were sequentially processed by electrohydrodynamic processing (EDHP). As a first step, the ultrathin biopolymer fibers were deposited onto a commercial food contact cellulose paper by electrospinning and, thereafter, the nanostructured silica was sequentially electrosprayed. The multilayer coated papers were annealed at different temperatures to promote adhesion between the layers and enhance the super-repellent properties. The developed coatings were characterized in terms of morphology, permeance to water vapor, adhesion, mechanical resistance, and contact and sliding angle. The resultant multilayer biopapers presented a hierarchical micro/nanostructured surface with an apparent water contact angle (WCA) higher than 155◦ and sliding angle (SA) lower than 10◦ for all the tested biopolymers used. Among the different multilayer approaches, it was observed that the paper/PHBV/SiO2 showed the best performance, in terms of water vapor permeance; resistance after the tape peeling-off test; and food super-repelling properties to water, yogurt, and custard. Overall, this study presents the successful generation of super-repellent biopapers coated with PLA, PCL, or PHBV along with hydrophobic silica microparticles and its effectiveness for easy emptying food packaging applications to reduce food waste., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project number RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encapsulation with HDPAF-WP of the hexane fraction of sea grape (Coccoloba uvifera L.) leaf extract by electrospraying

  • Ramos Hernández, Jorge Alberto
  • Calderón Santoyo, Montserrat
  • Prieto López, Cristina
  • Lagarón Cabello, José María
  • Navarro Ocaña, Arturo
  • Ragazzo Sánchez, Juan Arturo
The triterpenes have low solubility, as a strategy to facility its transport into the gastro-intestinal tract, the techno-functional properties of the mixture of high degree of polymerization Agave fructans (HDPAF) and whey protein (WP) as encapsulating material for stabilized Coccoloba uvifera L. extract fraction were evaluated. The purification of the extract was carried out by column chromatography, obtaining the fraction with the highest bioactivity. The microstructure evaluated by SEM showed capsules with spherical shapes using electrospraying. HPLC–MS analysis indicated the presence of β-sitosterol and lupeol in the encapsulates. The main interactions of biopolymers and compounds were by FTIR. The Tg of the capsules (> 149 °C) and the thermal stability (> 202 °C) of the compounds were by thermal analysis (DSC and TGA, respectively). The loading and encapsulation efficiency were 100 and 95%, respectively. Finally, the encapsulates presented antioxidant capacities for ABTS, DPPH, and FIC (between 90 and 71%). The HDPAF-WP mixture has techno-functional properties that allow the stabilization of HBVC by electrospraying. Graphical abstract: [Figure not available: see fulltext.], The authors thank Tecnológico Nacional de México for their support in conducting the work throughout the project “Fracciones de extracto de hoja de uva de mar (Coccoloba uvifera L.): Evaluación de la actividad biológica y encapsulación por electroesprayado” (code 11176.21-P), Consejo Nacional de Ciencia y Tecnología (CONACyT, Mexico) for the scholarship granted (number 702624) to Jorge Alberto Ramos-Hernández; CYTED thematic network code 319RT0576 and Spanish Ministry of Science, Innovation and Universities (project code RTI2018-097249-B-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Polysaccharide FucoPol-Based Nanofiber Systems

  • Vázquez González, Yuliana
  • Prieto López, Cristina
  • Stojanovic, Milan
  • Torres, Cristiana A. V.
  • Freitas, Filomena
  • Ragazzo Sánchez, Juan Arturo
  • Calderón Santoyo, Montserrat
  • Lagarón Cabello, José María
The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol's low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications., This study was supported by the CYTED thematic network (code 319RT0576), the Spanish Ministry of Science and Innovation (MICI) project RTI-2018-097249-B-C21 and H2020 EU project USABLE PACKAGING (reference number 836884). This work received financial support from FCT—Fundação para a Ciência e a Tecnologia, I.P. (Portugal), in the scope of projects UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences—UCIBIO, and project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy—i4HB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of an Electrospun Patch Platform Technology for the Delivery of Carvedilol in the Oral Mucosa

  • Pardo Figuérez, María
  • Teno, Jorge
  • Lafraya Aguado, Álvaro
  • Prieto López, Cristina
  • Lagarón Cabello, José María
The work herein presented aims to develop and characterize carvedilol (CVD) releasable non-water-soluble monolayers and a multilayer patch made of ultrathin micron and submicron fibers for drug delivery into the sublingual mucosa. Firstly, the developed formulations containing CVD within different biopolymers (PDLA, PCL, and PHB) were characterized by scanning electron microscopy (SEM), attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and for their in vitro drug release. SEM micrographs assessed the fiber morphology attained by adding carvedilol. ATR-FTIR spectra revealed good chemical compatibility between CVD and the tested biopolymers, whereas DSC and WAXS confirmed that CVD was in an amorphous state within the biopolymeric fibers. In vitro release studies showed enhanced CVD release kinetics from the electrospun biopolymer monolayers compared to the dissolution rate of the commercial form of the pure drug, except for the slow-releasing PDLA fibers. Finally, the selected CVD-loaded layer, i.e., electrospun PHB, was built into a three-layer patch to tackle mucosa adhesion and unidirectional release, while retaining the enhanced release kinetics. The patch design proposed here further demonstrates the potential of the electro-hydrodynamic processing technology to render unique mucoadhesive controlled delivery platforms for poorly water-soluble drugs., This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21) and BIOINICIA’s internal project ASOPHARM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Barrier biopaper multilayers obtained by impregnation of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with protein and polysaccharide hydrocolloids

  • Meléndez-Rodríguez, Beatriz
  • M'Bengue, Marie Stella
  • Torres-Giner, Sergio
  • Cabedo, Luis
  • Prieto López, Cristina
  • Lagarón Cabello, José María
Multilayer biopapers composed of two electrospun layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were impregnated, at the inner side of one of the layers, with cellulose nanocrystals (CNCs) and their composites with hydrocolloids, to develop high-barrier fully biobased structures. The study aimed for the first time at comparing the impregnation of electrospun fibers with several biopolymer solutions. Thus, neat CNCs, and CNCs mixed as a minor fraction, that is, 2 wt%, with gelatin (GE), agar (AG), xanthan gum (XG), and gum arabic (GA) were assessed in their potential to improve the barrier properties of PHBV. Glycerol plasticizer was added to the composite formulations. The impregnated electrospun multilayer mats were subsequently annealed, below the PHBV melting point, to yield continuous films by an interfiber coalescence process, so-called biopapers, and thereafter characterized to evaluate their potential for high barrier food packaging applications. The morphological characterization revealed good interlayer adhesion, more noticeably for those containing CNCs and their nanocomposites with AG and XG. From their mechanical response, it was inferred that the material behavior was governed mainly by the rigidity of the PHBV substrates, and this could not be significantly improved by impregnation with any of the various hydrocolloids. Whereas the water vapor barrier was not seen to improve in any of the samples, the barrier to the organic vapor limonene, used as a standard for aroma barrier, was however improved in the samples impregnated with AG and XG composites. Interestingly, the oxygen barrier properties were significantly improved but only by impregnation with pure CNCs. This study reports for the first time a scalable impregnation technology approach to produce fully biobased barrier multilayers., This research work was funded by the H2020 EU project USABLE PAKAGING (reference number 836884) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and Characterization of Fully Renewable and Biodegradable Polyhydroxyalkanoate Blends with Improved Thermoformability

  • Feijoo, Patricia
  • Samaniego Aguilar, Kerly
  • Sánchez-Safont, Estefanía
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
  • Gámez Pérez, Jose
  • Cabedo, Luis
Poly(3-hydroxybutyrate-co-3-valerate) (PHBV), being one of the most studied and commercially available polyhydroxyalkanoates (PHAs), presents an intrinsic brittleness and narrow processing window that currently hinders its use in several plastic applications. The aim of this study was to develop a biodegradable PHA-based blend by combining PHBV with poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH), another copolyester of the PHA family that shows a more ductile behavior. Blends of PHBV with 20% wt., 30% wt., and 40% wt. of PHBH were obtained by melt mixing, processed by cast extrusion in the form of films, and characterized in terms of their morphology, crystallization behavior, thermal stability, mechanical properties, and thermoformability. Full miscibility of both biopolymers was observed in the amorphous phase due to the presence of a single delta peak, ranging from 4.5 °C to 13.7 °C. Moreover, the incorporation of PHBH hindered the crystallization process of PHBV by decreasing the spherulite growth rate from 1.0 µm/min to 0.3 µm/min. However, for the entire composition range studied, the high brittleness of the resulting materials remained since the presence of PHBH did not prevent the PHBV crystalline phase from governing the mechanical behavior of the blend. Interestingly, the addition of PHBH greatly improved the thermoformability by widening the processing window of PHBV by 7 s, as a result of the increase in the melt strength of the blends even for the lowest PHBH content., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER “Una manera de hacer Europa”, project number RTI2018-097249-B-C21. Moreover, this work has also been granted with the financial support of the Generalitat Valenciana (project AICO/2021/045), H2020 EU Project YPACK (H2020-SFS-2017-1, Reference 773872) and by the Universitat Jaume I (project UJI- B2019-44). K.S-A. would like to acknowledge the MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro” for their FPI fellowship (PRE2019-091448). S.T-G. acknowledges the Spanish Ministry of Science, Innovation and Universities (MICIU) for the funding received during their Juan de la Cierva-Incorporación contract (IJCI-2016-29675)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of linen processing by-products for the development of injection-molded green composite pieces of polylactide with improved performance

  • Agüero, Ángel
  • Lascano, Diego
  • Garcia-Sanoguera, David
  • Fenollar, Octavio
  • Torres Giner, Sergio
This work reports the development and characterization of green composites based on polylactide (PLA) containing fillers and additives obtained from by-products or waste-streams from the linen processing industry. Flaxseed flour (FSF) was first produced by the mechanical milling of golden flaxseeds. The resultant FSF particles were melt-compounded at 30 wt% with PLA in a twin-screw extruder. Two multi-functionalized oils derived from linseed, namely epoxidized linseed oil (ELO) and maleinized linseed oil (MLO), were also incorporated during melt mixing at 2.5 and 5 parts per hundred resin (phr) of composite. The melt-compounded pellets were thereafter shaped into pieces by injection molding and characterized. Results showed that the addition of both multi-functionalized linseed oils successfully increased ductility/ toughness, and thermal stability of the green composite pieces whereas water diffusion was reduced. The improvement achieved was related to both a plasticizing effect and, more interestingly, an enhancement of the interfacial adhesion between the biopolymer and the lignocellulosic particles by the reactive vegetable oils. The most optimal performance was attained for the MLO-containing green composite pieces, even at the lowest content, which was ascribed to the higher solubility of MLO with the PLA matrix. Therefore, the present study demonstrates the potential use of by-products or waste from flax (Linum usitatissimum L.) to obtain renewable raw materials of suitable quality to develop green composites with high performance for market applications such as rigid food packaging and food-contact disposable articles in the frame of the Circular Economy and Bioeconomy., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Whey Protein Purity on the Characteristics of Algae Oil-Loaded Encapsulates Obtained by Electrospraying Assisted by Pressurized Gas

  • Prieto López, Cristina
  • Talón, Emma
  • Noreña, Caciano Zapata
  • Lagarón Cabello, José María
In this paper, the effect of protein purity in three different whey protein grades on the characteristics of algae oil encapsulates obtained via room-temperature electrospraying assisted by pressurized gas (EAPG) encapsulation process was studied. Three different commercial grades of whey protein purity were evaluated, namely 35, 80, and 90 wt.%. Oil nanodroplets with an average size of 600 nm were homogeneously entrapped into whey protein microparticles 3 µm in size. However, the sphericity and the surface smoothness of the microparticles increased by increasing the protein purity in the grades of whey protein studied. The porosity of the microparticles was also dependent on protein purity as determined by nitrogen adsorption-desorption isotherms, being smaller for larger contents of protein. Interestingly, the lowest extractable oil was obtained with WP35, probably due to the high content of lactose. The peroxide values confirmed the superior protective effect of the protein, obtaining the smallest peroxide value for WP90, a result that is consistent with its reduced porosity and with its lower permeability to oxygen, as confirmed by the fluorescence decay-oxygen consumption method. The accelerated stability assay against oxidation confirmed the higher protection of the WP80 and WP90. In addition, the increased content in protein implied a higher thermal stability according to the thermogravimetric analysis. These results further confirm the importance of the adequate selection of the composition of wall materials together with the encapsulation method., This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21), the Valencian Innovation Agency (AVI) BIOENCAP project (reference number INNCAD00-18-31), H2020 EU FODIAC project (reference number 778388) and the H2020 EU projects CAPSULTEK (reference number 873827), CDTI-CIEN Dantian project (IDI-20190954) and the CYTED thematic network code 319RT0576., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Multilayer Ciprofloxacin Hydrochloride Electrospun Patches for Buccal Drug Delivery

  • Teno, Jorge
  • Pardo Figuérez, María
  • Figueroa López, Kelly J.
  • Prieto López, Cristina
  • Lagarón Cabello, José María
Bacterial infections in the oral cavity can become a serious problem causing pain, sores and swelling for several weeks. This type of infection could be alleviated using mucoadhesive delivery systems, allowing local administration of the antibiotic to inhibit bacterial spreading. This work reports the development of a multilayer antibiotic patch containing ciprofloxacin hydrochloride (CPX)-loaded electrospun fibers for the treatment of such infections. For this, the release kinetics of the CPX-loaded fibers was modulated using different ratios of polyester blends. The selected reservoir layer was analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), wide angle x-ray scattering (WAXS) and differential scanning calorimetry (DSC). These analyses confirmed the presence and good distribution of the drug in the fibers and that the drug is in an amorphous state within the reservoir layer. To enhance mucoadhesion whilst ensuring drug directionality, the reservoir layer was assembled to a backing and an adhesive layer. This multilayer patch was assessed in terms of in vitro drug release, adhesion and antimicrobial properties. The multilayer strategy showed excellent antimicrobial properties over time and also a strong adhesion patch time in the volunteers for an average of 7 h. These results highlight the capabilities of multilayer electrospun patches as platforms to treat oral infections., This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21), the Valencian Innovation Agency BIOENCAP project (reference number INNCAD00-18-31), the H2020 EU projects FODIAC (reference number 778388), CAPSULTEK (reference number 873827), the CYTED thematic network (code 319RT0576) and BIOINICIA’s internal project ASOPHARM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Electrospun Nanofibers Containing Natural Deep Eutectic Solvents Exhibiting a 3D Rugose Morphology and Charge Retention Properties

  • Basar, Ahmet Ozan
  • Prieto López, Cristina
  • Pardo Figuérez, María
  • Lagarón Cabello, José María
In the present study, electrospun nanofibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biodegradable polyester, containing natural deep eutectic solvents (NADES) were obtained and reported for the first time, exhibiting an unreported 3D morphology and enhanced charge retention properties. Choline chloride (ChCl)/urea/water in a molar ratio of 1:2:1 was used as the NADES model system. Electrospun nanofibers were produced from a 10 wt % solution of PHBV containing 26 wt % NADES with respect to the polymer and were deposited on different substrates, that is, aluminum foil and non-woven spunbond polypropylene (PP). The morphology and charge retention ability were characterized under different conditions and on different substrates. The attained fiber morphology for the NADES-containing mats showed an average fiber diameter of around 300 nm, whereas the pure PHBV polymer under the same conditions produced electrospun fibers of around 880 nm. However, the deposition of PHBV/ChCl/urea/water fibers resulted in a surprising macroscopic rugose 3D surface morphology made of aligned nanofibers when processed at 50% relative humidity (RH). The nanofiber grammages above which this 3D morphology, associated with NADES-induced charge retention, formed was found to be dependent on the substrate used and RH. This morphology was not seen at 20% RH nor when pure PHBV was produced. Charge stability studies revealed that PHBV/ChCl/urea/water nanofibers exhibited lasting charge retention, especially when sandwiched between spunbond polypropylene textiles. Finally, such multilayer structures containing a very thin double layer of PHBV/ChCl/urea/water fibers after corona treatment exhibited improved paraffin aerosol penetration, which was ascribed to the combination of thinner fibers and their charge retention capacity. The here-developed electrospun PHBV fibers containing NADES demonstrated for the first time a new potential application as electret filter media., This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21) and the PTI + Global Health of CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimutagenic and Antiproliferative Activity of the Coccoloba uvifera L. Extract Loaded in Nanofibers of Gelatin/Agave Fructans Elaborated by Electrospinning

  • Cruz-Salas, Carla N
  • Prieto López, Cristina
  • Calderón-Santoyo, Montserrat
  • Lagarón Cabello, José María
  • Ramos-Hernández, Jorge A
  • Ragazzo Sánchez, Juan Arturo
Background: The Coccoloba uvifera L. species is currently considered an important source of compounds of high biological value such as lupeol. This is related to different and important biological activities to human health. Objective: The objective of this study was to encapsulate the C. uvifera extract in nanofibers made with the biopolymers gelatin (G)/high-grade polymerization agave fructans (HDPAF) in the proportions 1:0, 1:1, 1:2, 1:3 and 0:1, through the electrospinning process, in addition to evaluating the antimutagenic and antiproliferative properties of the encapsulated extract. Methods: The physicochemical characteristics of the nanofibers were evaluated, as well as the antiproliferative and antimutagenic activities of the encapsulated and unencapsulated extract. SEM evaluation shows nanofibers of smooth, continuous morphology and nanometric size (50-250 nm). The TGA, FTIR-ATR, HPLC-MS analyses reveal the presence of the extract in the nanofibers. Results: The extract did not show a mutagenic effect during the development of the Ames test, on the other hand, the MTT test showed the antiproliferative effect at the concentrations of 50 and 100 μg/mL of extract. Conclusion: The extract of C. uvifera loaded in nanofibers elaborated by electrospinning with the G/HDPAF biopolymers conserves its antimutagenic and antiproliferative properties., This study was supported by the Consejo Nacional de Ciencia y Tecnología (CONACyT, Mexico) for the project code 316948, CYTED thematic network code 319RT0576, and Spanish Ministry of Science, Innovation and Universities (project code RTI2018-097249-B-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo Figuérez, María
  • Prieto López, Cristina
  • Arnal, Carmen
  • Torres-Giner, Sergio
  • Cabedo, Luis
  • Lagarón Cabello, José María
In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-B-C1 and PID2021-128749OB-C31)., Peer reviewed