Pasar al contenido principal

DESARROLLO DE NUEVAS CAPAS BASADAS EN BIOPOLIMEROS OBTENIDAS MEDIANTE PROCESADO ELECTROHIDRODINAMICO CON PROPIEDADES DE BARRERA ACTIVA Y PASIVA PARA RECUBRIR PAPEL Y FILMS CO

PID2021-128749OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dragon&apos, s Blood Sap Microencapsulation within Whey Protein Concentrate and Zein Using Electrospraying Assisted by Pressurized Gas Technology

  • Escobar-García, Juan David
  • Prieto, Cristina
  • Pardo-Figuerez, Maria
  • Lagaron, Jose M.
[EN] Dragon's blood sap (DBS) obtained from the bark of Croton lechleri (Müll, Arg.) is a complex herbal remedy of pharmacological interest due to its high content in polyphenols, specifically proanthocyanidins. In this paper, electrospraying assisted by pressurized gas (EAPG) was first compared with freeze-drying to dry natural DBS. Secondly, EAPG was used for the first time to entrap natural DBS at room temperature into two different encapsulation matrices, i.e., whey protein concentrate (WPC) and zein (ZN), using different ratios of encapsulant material: bioactive compound, for instance 2:1 w/w and 1:1 w/w. The obtained particles were characterized in terms of morphology, total soluble polyphenolic content (TSP), antioxidant activity, and photo-oxidation stability during the 40 days of the experiment. Regarding the drying process, EAPG produced spherical particles with sizes of 11.38 ± 4.34 µm, whereas freeze-drying produced irregular particles with a broad particle size distribution. However, no significant differences were detected between DBS dried by EAPG or freeze-drying in TSP, antioxidant activity, and photo-oxidation stability, confirming that EAPG is a mild drying process suitable to dry sensitive bioactive compounds. Regarding the encapsulation process, the DBS encapsulated within the WPC produced smooth spherical microparticles, with average sizes of 11.28 ± 4.28 µm and 12.77 ± 4.54 µm for ratios 1:1 w/w and 2:1 w/w, respectively. The DBS was also encapsulated into ZN producing rough spherical microparticles, with average sizes of 6.37 ± 1.67 µm and 7.58 ± 2.54 µm for ratios 1:1 w/w and 2:1 w/w, respectively. The TSP was not affected during the encapsulation process. However, a slight reduction in antioxidant activity measured by DPPH was observed during encapsulation. An accelerated photo-oxidation test under ultraviolet light confirmed that the encapsulated DBS showed an increased oxidative stability in comparison with the non-encapsulated DBS, with the stability being enhanced for the ratio of 2:1 w/w. Among the encapsulating materials and according to the ATR-FTIR results, ZN showed increased protection against UV light. The obtained results demonstrate the potential of EAPG technology in the drying or encapsulation of sensitive natural bioactive compounds in a continuous process available at an industrial scale, which could be an alternative to freeze-drying., This research was funded by the Valencian Innovation Agency (AVI) BIOENCAP project (reference number INNCAD00-18-31), H2020 EU FODIAC project (reference number 778388), and the H2020 EU projects CAPSULTEK (reference number 873827), grant PID2021-128749OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. J.D.E.G. would like to thank the Spanish Ministry of Economy, Industry and Competitivity for his predoctoral grant (DI-6906). C.P. would like to thank the Valencian Ministry of Innovation, Universities, Science and Digital Society for her postdoctoral grant (CIAPOS/2021/45).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) Biopapers

  • Basar, Ahmet Ozan
  • Prieto, Cristina
  • Cabedo, Luis
  • Sammon, Chris
  • Lagaron, Jose Maria
[EN] In this study, electrospun poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) biopapers were produced by annealing electrospun fiber mats from two commercial grades (151C and X131A) and compared with films prepared by the conventional melt-mixing/compression molding method. To obtain continuous biopapers, the fiber mats were subjected to mild thermal post-processing at various temperatures. The selected annealing temperatures were 140 degrees C (151C) and 130 degrees C (X131A), where interfiber coalescence occurred within a short annealing time (10 s), yielding continuous fibrous films (biopapers). To elucidate the structural mechanisms underlying interfiber coalescence, time-resolved synchrotron SAXS/WAXS and temperature-dependent FTIR spectroscopy were performed. These analyses showed that coalescence occurred through an interplay between thermally induced local ordering at sub-melting temperatures and premelting/partial melting of thin, ill-defined lamellae, with grade-dependent contributions. The resulting biopapers were evaluated against compression-molded films for optical, mechanical, and barrier properties relevant to packaging. All samples showed similar transparency, although compression-molded films were slightly more opaque. The lower-rigidity grade (151C) exhibited more ductile and tougher behavior than X131A. Biopapers showed slightly lower water and oxygen barrier performance than compression-molded films, attributed to differences in material compactness. Overall, brief mild annealing after electrospinning enabled continuous PHBH biopapers with balanced properties, supporting their potential for sustainable PHBH-based food-packaging applications., This research was funded by MICIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", grant number PID2021-128749OB-C31. The ALBA Synchrotron, Spain, is also acknowledged for the funding received through the project "Time-Resolved Simultaneous WAXS/SAXS Characterization as a Function of Temperature of Annealed Electrospun Polyhydroxyalkanoates of Different Molecular Weights and Comonomer Type and Content Containing NADES" (2021095319).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo-Figuerez, María
  • Prieto, Cristina
  • Arnal, Carmen
  • Cabedo, Luis
  • Lagaron, José M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-BC1 and PID2021-128749OB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Unique Morphology and Elastic Properties of Multi-Jet Electrospun Cashew Gum-Based Fiber Mats

  • Grumi, Mattia
  • Prieto, Cristina
  • Furtado, Roselayne F.
  • Cheng, Huai N.
  • Biswas, Atanu
  • Limbo, Sara
  • Cabedo, Luis
  • Lagaron, Jose M.
[EN] This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high-molecular-weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is a low-cost, non-toxic heteropolysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution was needed to produce more stable and defect-free straight and smooth fibers. Additionally, the inclusion of glycerol as a plasticizer was required to overcome material fragility. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Furthermore, the resulting oriented fiber mats exhibited unexpectedly high elongation at break under ambient conditions. These findings underscore the potential of this bio-polysaccharide-based formulation for non-direct water contact applications that demand elastic properties., This study was supported by the Agencia Valenciana de Innovacion (AVI), project INNEST/2022/25, and by the Spanish Ministry of Science Innovation and Universities (MCIU), project PID2021-128749OB-C31.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and Characterization of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers Containing Cerium Oxide Nanoparticles for Active Food Packaging Applications

  • Figueroa-Lopez, Kelly J.
  • Prieto López, Cristina
  • Pardo Figuérez, María
  • Cabedo, Luis
  • Lagarón Cabello, José María
Food quality is mainly affected by oxygen through oxidative reactions and the proliferation of microorganisms, generating changes in its taste, odor, and color. The work presented here describes the generation and further characterization of films with active oxygen scavenging properties made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) loaded with cerium oxide nanoparticles (CeO2NPs) obtained by electrospinning coupled to a subsequent annealing process, which could be used as coating or interlayer in a multilayer concept for food packaging applications. The aim of this work is to explore the capacities of these novel biopolymeric composites in terms of O2 scavenging capacity, as well as antioxidant, antimicrobial, barrier, thermal, and mechanical properties. To obtain such biopapers, different ratios of CeO2NPs were incorporated into a PHBV solution with hexadecyltrimethylammonium bromide (CTAB) as a surfactant. The produced films were analyzed in terms of antioxidant, thermal, antioxidant, antimicrobial, optical, morphological and barrier properties, and oxygen scavenging activity. According to the results, the nanofiller showed some reduction of the thermal stability of the biopolyester but exhibited antimicrobial and antioxidant properties. In terms of passive barrier properties, the CeO2NPs decreased the permeability to water vapor but increased the limonene and oxygen permeability of the biopolymer matrix slightly. Nevertheless, the oxygen scavenging activity of the nanocomposites showed significant results and improved further by incorporating the surfactant CTAB. The PHBV nanocomposite biopapers developed in this study appear as very interesting constituents for the potential design of new active organic recyclable packaging materials., Authors thank the funding received from the EU H2020 BBI JU USABLE PACKAGING project—836884 and also from the Spanish Ministry of Science and Innovation, project PID2021-128749OB-C31., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo Figuérez, María
  • Prieto López, Cristina
  • Arnal, Carmen
  • Torres-Giner, Sergio
  • Cabedo, Luis
  • Lagarón Cabello, José María
In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-B-C1 and PID2021-128749OB-C31)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun hybrid TiO<inf>2</inf>/humic substance PHBV films for active food packaging applications

  • Venezia, Virginia
  • Prieto López, Cristina
  • Evtoski, Zoran
  • Marcoaldi, Chiara
  • Silvestri, Brigida
  • Vitiello, Giuseppe
  • Luciani, Giuseppina
  • Lagarón Cabello, José María
Sustainable packaging materials can play a key role in minimizing the environmental footprint of packaged food by preserving its quality and avoiding environmental persistence of plastic waste. Waste to wealth approach can cope with these major challenges by providing for bioavailable active compounds from waste residues. To this regard, humic substances (HS), derived from biowaste oxidative processes, exhibit intrinsic antioxidant and antimicrobial features, which can be significantly boosted by molecular combination with an inorganic nanostructured phase. Herein, this approach has been integrated with the electrospinning technology to design composite films made of electrospun biodegradable and bioderived polymers filled with nanostructured hybrid HS based materials. Therefore, electrospun composites made by including hybrid TiO2_HS nanostructures into PHBV matrix were first produced and then converted into homogeneous and continuous films to obtain an active layer which will be part of a multilayer food packaging solution. These were characterized in terms of morphology, thermal, crystallinity, optical, mechanical and barrier properties as well as antimicrobial performance against Staphylococcus aureus and Escherichia coli, two main strains of food pathogens. The results suggested that the combination of hybrid nanomaterials with electrospinning methodology is a promising and sustainable approach to convert biowaste into multifunctional materials for active packaging., The authors thank the Verde Vita company (s.r.l.) for providing the compost from which the humic substance HS used in this work was extracted. The authors wish to thank the European Union POC Ricerca e Innovazione 2014–2020, Azione I.1 “Dottorati Innovativi con caratterizzazione Industriale”) for funding a XXXV Cycle Ph.D. grant to Dr. Virginia Venezia. The collaboration with this company is foreseen as part of the activity scheduled in the POC doctoral project. The authors would also like to thank the Spanish Ministry of Science and Innovation, project PID2021-128749OB-C31 for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of antifungal electrospun nanofiber mats containing Meyerozyma caribbica

  • Vázquez González, Yuliana
  • Prieto López, Cristina
  • Calderón Santoyo, Montserrat
  • Ragazzo Sánchez, Juan Arturo
  • Lagarón Cabello, José María
To mitigate vegetable and fruit loss caused by post-harvest fungal diseases, polymeric antifungal coatings encapsulating biocontrol yeasts offer a sustainable alternative. Nanofibers derived from pullulan, cashew gum, FucoPol and poly (ethylene oxide) (PEO), were electrospun and loaded with Meyerozyma caribbica (GenBank ID: JQ398674). The morphological, thermal and chemical properties of cashew gum (CG:PEO), FucoPol (FP:PEO), and pullulan nanofibers were characterized. The viability of M. caribbica within the fibers and their in vitro antifungal activity against six phytopathogens were assessed. Morphological analysis exhibited the presence of nanofibers encapsulating M. caribbica. ATR-FTIR spectroscopy identified the absence of interactions between the yeast and polymers. Fibers containing M. caribbica exhibited in vitro fungistatic effects on spore germination. Pullulan nanofibers showed the highest M. caribbica viability and the highest percentage of growth inhibition against the evaluated fungi. These promising nanofibers encapsulating biocontrol yeasts could be used as edible coatings or agricultural aids, which offer an alternative for post-harvest treatment to control fungal diseases, reducing global food loss., This work was supported by the CYTED thematic network (code 319RT0576), the Agencia Valenciana de Innovación (AVI), projects INNEST/2022/25 and AGROALNEXT/2022/058, the grant PID2021-128749OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Ciprofloxacin-Loaded Electrospun Yarns of Application Interest as Antimicrobial Surgical Suture Materials

  • Teno, Jorge
  • Pardo Figuérez, María
  • Evtoski, Zoran
  • Prieto López, Cristina
  • Cabedo, Luis
  • Lagarón Cabello, José María
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Surgical site infections (SSI) occur very frequently during post-operative procedures and are often treated with oral antibiotics, which may cause some side effects. This type of infection could be avoided by encapsulating antimicrobial/anti-inflammatory drugs within the surgical suture materials so that they can more efficiently act on the site of action during wound closure, avoiding post-operative bacterial infection and spreading. This work was aimed at developing novel electrospun bio-based anti-infective fibre-based yarns as novel suture materials for preventing surgical site infections. For this, yarns based on flying intertwined microfibres (1.95 ± 0.22 µm) were fabricated in situ during the electrospinning process using a specially designed yarn collector. The electrospun yarn sutures (diameter 300–500 µm) were made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with different contents of 3HV units and contained ciprofloxacin hydrochloride (CPX) as the antimicrobial active pharmaceutical ingredient (API). The yarns were then analysed by scanning electron microscopy, Fourier transform infrared spectroscopy, wide-angle X-ray scattering, differential scanning calorimetry, and in vitro drug release. The yarns were also analysed in terms of antimicrobial and mechanical properties. The material characterization indicated that the varying polymer molecular architecture affected the attained polymer crystallinity, which was correlated with the different drug-eluting profiles. Moreover, the materials exhibited the inherent stiff behaviour of PHBV, which was further enhanced by the API. Lastly, all the yarn sutures presented antimicrobial properties for a time release of 5 days against both Gram-positive and Gram-negative pathogenic bacteria. The results highlight the potential of the developed antimicrobial electrospun yarns in this study as potential innovative suture materials to prevent surgical infections., This study was supported by the Agencia Valenciana de Innovación (AVI), project INNEST/2022/3-25-64, and by the Spanish Ministry of Science and Innovation (MICIN), projects PID2021-128749OB-C31 and TED2021-130211B-C32., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Unique Morphology and Elastic Properties of Multi-Jet Electrospun Cashew Gum-Based Fiber Mats

  • Grumi, Mattia
  • Prieto López, Cristina
  • Furtado, Roselayne F.
  • Cheng, Huai N.
  • Biswas, Atanu
  • Limbo, Sara
  • Cabedo, Luis
  • Lagarón Cabello, José María
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high-molecular-weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is a low-cost, non-toxic heteropolysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution was needed to produce more stable and defect-free straight and smooth fibers. Additionally, the inclusion of glycerol as a plasticizer was required to overcome material fragility. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Furthermore, the resulting oriented fiber mats exhibited unexpectedly high elongation at break under ambient conditions. These findings underscore the potential of this bio-polysaccharide-based formulation for non-direct water contact applications that demand elastic properties., This study was supported by the Agencia Valenciana de Innovación (AVI), project INNEST/2022/25, and by the Spanish Ministry of Science Innovation and Universities (MCIU), project PID2021-128749OB-C31., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun films incorporating humic substances of application interest in sustainable active food packaging

  • Venezia, Virginia
  • Prieto López, Cristina
  • Verrillo, Mariavittoria
  • Grumi, Mattia
  • Silvestri, Brigida
  • Vitiello, Giuseppe
  • Luciani, Giuseppina
  • Lagarón Cabello, José María
Sustainable active food packaging is essential to reduce the use of plastics, preserve food quality and minimize the environmental impact. Humic substances (HS) are rich in redox-active compounds, such as quinones, phenols, carboxyl, and hydroxyl moieties, making them functional additives for biopolymeric matrices, such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Herein, composites made by incorporating different amounts of HS into PHBV were developed using the electrospinning technology and converted into homogeneous and continuous films by a thermal post-treatment to obtain a bioactive and biodegradable layer which could be part of a multilayer food packaging solution. The morphology, thermal, optical, mechanical, antioxidant and barrier properties of the resulting PHBV-based films have been evaluated, as well as the antifungal activity against Aspergillus flavus and Candida albicans and the antimicrobial properties against both Gram (+) and Gram (-) bacterial strains. HS show great potential as natural additives for biopolymer matrices, since they confer antioxidant, antimicrobial, and antifungal properties to the resulting materials. In addition, barrier, optical and mechanical properties highlighted that the obtained films are suitable for sustainable active packaging. Therefore, the electrospinning methodology is a promising and sustainable approach to give biowaste a new life through the development of multifunctional materials suitable in the active bio-packaging., The authors thank the Verde Vita company (s.r.l.) for providing the compost from which the humic substance HS used in this work was extracted. The authors thank the Spanish Ministry of Science and Innovation, project PID2021-128749OB-C31 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multilayer Film Comprising Polybutylene Adipate Terephthalate and Cellulose Nanocrystals with High Barrier and Compostable Properties

  • Meléndez-Rodríguez, Beatriz
  • Prieto López, Cristina
  • Pardo Figuérez, María
  • Angulo, Inmaculada
  • Bourbon, Ana I.
  • Amado, Isabel R.
  • Cerqueira, Miguel A.
  • Pastrana, Lorenzo M.
  • Hilliou, Loic Hugues Gilles
  • Vicente, António A.
  • Cabedo, Luis
  • Lagarón Cabello, José María
In the present study, a multilayer, high-barrier, thin blown film based on a polybutylene adipate terephthalate (PBAT) blend with polyhydroxyalkanoate (PHA), and composed of four layers including a cellulose nanocrystal (CNC) barrier layer and an electrospun poly(3-hydroxybutyrateco- 3-hydroxyvalerate) (PHBV) hot-tack layer, was characterized in terms of the surface roughness, surface tension, migration, mechanical and peel performance, barrier properties, and disintegration rate. The results showed that the film exhibited a smooth surface. The overall migration tests showed that the material is suitable to be used as a food contact layer. The addition of the CNC interlayer had a significant effect on the mechanical properties of the system, drastically reducing the elongation at break and, thus, the flexibility of the material. The film containing CNCs and electrospun PHBV hot-tack interlayers exhibited firm but not strong adhesion. However, the multilayer was a good barrier to water vapor (2.4 ± 0.1 × 10−12 kg·m−2·s−1·Pa−1), and especially to oxygen (0.5 ± 0.3 × 10−15 m3·m−2·s−1·Pa−1), the permeance of which was reduced by up to 90% when the CNC layer was added. The multilayer system disintegrated completely in 60 days. All in all, the multilayer system developed resulted in a fully compostable structure with significant potential for use in high-barrier food packaging applications, This research work was funded by the H2020 EU project YPACK (reference number 773872) and by the Spanish Ministry of Science Innovation and Universities (MCIU), project PID2021-128749OB-C31, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of the Stability of a Camu Camu Extract Dried and Encapsulated by Means of High-Throughput Electrospraying Assisted by Pressurized Gas

  • Escobar-García, Juan David
  • Prieto López, Cristina
  • Talón Argente, Emma
  • Lagarón Cabello, José María
This study explores the impact on the stability of drying and the encapsulation of a camu camu extract (CCX) using the non-thermal, high-throughput electrospraying assisted by pressurized gas (EAPG) technique. The dried and encapsulated products by the EAPG processing techniques were compared in terms of total soluble phenolic compounds, antioxidant activity, and storage stability. Whey protein concentrate (WPC) and zein (ZN) were selected as the protective excipients for encapsulation. Dried and encapsulated products were obtained in the form of microparticles, which were smaller and more spherical in the case of the encapsulates. No significant differences were observed in the total polyphenolic content (TSP), and only relatively small differences in the antioxidant capacity were measured among samples. The generated products were subjected to various storage conditions to assess their stability and the preservation of the TSP and the antioxidant properties, i.e., 0% relative humidity (RH) and 4 °C; 0% RH and 21 °C; 23% RH and 21 °C; 56% RH and 21 °C; and UV light exposure. The results indicated that ZN encapsulation notably enhanced the retention of total soluble polyphenols and the antioxidant activity compared to WPC and dried CCX, especially in the ratio of 2:1 (encapsulating polymer: dried CCX). This study demonstrates the potential of protein-based encapsulation, particularly using ZN, for stabilizing bioactive compounds against degradation mechanisms induced by humidity, temperature, or ultraviolet radiation exposure., This research was funded by the Valencian Innovation Agency (AVI) BIOENCAP project (reference number INNCAD00-18-31), the H2020 EU FODIAC project (reference number 778388), and the H2020 EU projects CAPSULTEK (reference number 873827), grant PID2021-128749OB-C31 funded by MCIN/AEI/10.13039/501100011033, and by ERDF A Way of Making Europe., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polycaprolactone-based electrospun films incorporating sage extract: From active food packaging application to accelerated biodegradation by Pseudomonas

  • Salević-Jelić, Ana
  • Lević, Steva
  • Prieto López, Cristina
  • Jeremić, Sanja
  • Stevanović, Sanja
  • Rac, Vladislav
  • Vukašinović, Ivana
  • Nedović, Viktor
  • Lagarón, José María
Polycaprolactone films incorporating sage extract (SE), developed by electrospinning and annealing, were tested as active, fast-degradable food contact materials. First, a release test with food simulants showed the films’ ability to release phenolics. This beneficial property was highlighted in the films’ application as pads for preventing raspberry quality deterioration. The highest SE containing film (20 %) demonstrated the highest preserving potential, suppressing raspberry spoilage, breakdown of soluble solids, maintaining color, and increasing phenolics content. Secondly, the degradation under natural environment conditions and conditions accelerating the degradation of the films was evaluated. Complete films’ bio-disintegration in compost occurred within three months, being catalyzed to four weeks by adding Pseudomonas aeruginosa, regardless of the SE incorporation. Visual appearance, light, scanning electron, and atomic force microscopy indicated an inhomogeneous surface degradation mechanism depended on the morphology of the films. Analysis of the structural properties and crystallinity showed that both amorphous and crystalline film regions were affected by biodegradation. The developed films as packaging materials can be beneficial from an economic and environmental point of view, as they can extend the shelf-life of fresh fruit, prevent the generation of food waste, reduce the accumulation of discarded packaging materials, protect the environment, and contribute to sustainable development., Ministry of Science, Technological Development, and Innovation, Republic of Serbia (grant number 451–03–65/2024–03/200116), COST Action FP1405 (STSM reference number 39168) and Spanish Ministry of Science and Innovation (MICIN) (project PID2021–128749OB-C31) supported this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution Blow Spinning to Produce Antifungal Nanofibers from Pullulan, FucoPol, and Cashew Gum and Its Potential Postharvest Application on Avocado Fruit

  • Vázquez González, Yuliana
  • Prieto López, Cristina
  • Lagarón, José María
  • Ragazzo Sánchez, Juan Arturo
  • Calderón Santoyo, Montserrat
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Food Science & Technology, copyright © 2024 American Chemical Society, after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsfoodscitech.4c00794”, Solution blow spinning (SBS) is a promising technology for producing nanofibers with potential applications in postharvest treatments. This study established conditions for creating biopolymeric nanofibers encapsulating Meyerozyma caribbica, a biocontrol agent effective against Colletotrichum gloeosporioides, the primary fungus affecting avocados. The pullulan, FucoPol, and cashew gum polymeric solutions were characterized by viscosity and surface tension and processed by SBS to obtain nanofibers. These were evaluated for morphology, storage viability, antifungal activity, and effects on the quality properties of avocados. SBS nanofibers were homogeneous, continuous, and curly, ranging from 151 to 777 nm. The nanofibers maintained M. caribbica’s high viability and antifungal activity in vitro and in vivo against C. gloeosporioides. Pullulan nanofibers encapsulating M. caribbica inhibited fungal growth, outperforming the synthetic fungicide azoxystrobin. The nanofiber application did not affect the quality attributes of the avocados, such as pH, titratable acidity, total soluble solids, weight loss, firmness, and dry matter content. SBS can effectively entrapM. caribbica in nanofibers to control avocado anthracnose., This study was supported by the CYTED thematic network [code 319RT0576], the Tecnologico Nacional de Mexico (TecNM) [project 13838.22-P], the Agencia Valenciana de Innovación (AVI) [project INNEST/2022/25], the grant PID2021-128749OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing the Mechanical Properties of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fiber Mats Using Deep Eutectic Solvents

  • Basar, Ahmet O
  • Prieto López, Cristina
  • Cabedo, Luis
  • Lagarón Cabello, José María
In this study, the use of deep eutectic solvents (DESs) was considered for the first time to improve the mechanical properties of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) fiber mats. For this, different DES formulations, namely, Choline Chloride (ChCl):Urea:Water, ChCl:Glycerol (Gly), and Gly:Sodium Citrate (NaCitrate), were selected and evaluated at a concentration of 10 wt %, and their efficacy enhancing mechanical properties was compared against traditional plasticizing additives glycerol and acetyl tributyl citrate (ATBC). The impact of these formulations on PHBV fiber mats was evaluated in terms of thermal, crystallinity, and mechanical properties, both as obtained and after aging. All samples produced macroscopically consistent, self-supporting, and handleable nonwoven material sheets. The DES-containing PHBV showed a thinner, bead-free surface morphology but a rugose surface morphology. DSC results indicated that glycerol, ATBC, and Gly:NaCitrate (DES) exhibited the highest reduction in melting temperatures, with a notable 5.6 °C decrease for the mat containing Gly:NaCitrate. Interestingly, electrospun PHBV fibers containing DES revealed a larger quantity of β-form planar zigzag chain conformations, so-called β-form crystals. Tensile test results revealed that depending on the additive formulation, the mechanical performance of the samples was fundamentally different from each other. Among DESs, PHBV fiber mats with ChCl-based DES were excessively brittle. Surprisingly and interestingly, PHBV fiber mats containing Gly:NaCitrate exhibited an unreported significant increase in all mechanical properties, including modulus, elongation at break, and toughness. Overall, this study highlights the potential of DESs as unique additives to tailor the mechanical properties of electrospun PHBV materials., This work was supported by the MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” [project PID2021-128749OB-C31] and the ALBA Synchrotron, Barcelona, Spain [project 2021095319]., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun Polybutylene Succinate Coatings for Sustainable Cardboard Packaging: Structure-Property Relationships

  • Vercasson, Allison
  • Prieto, Cristina
  • Gaucel, Sébastien
  • Gontard, Nathalie
  • Guillard, Valérie
  • Angellier-Coussy, Hélène
  • Lagarón Cabello, José María
Producing thin biopolymer-coated paper and cardboard is essential for a large range of applications, such as food packaging, as it allows to maintain flexibility while reducing the environmental impact and enhancing barrier properties. This study investigates electrospinning to generate polybutylene succinate (PBS)-coated cardboards with contrasted structures (i.e., different thicknesses of the individual layers). Four contrasted structures of PBS-coated cardboards are produced, presenting low polymer thickness remaining on top of the substrate (10 to 25 µm) but differing in the thickness of their characteristic layers (including the impregnated layer). The effect of the electrospinning parameters (deposition time, method (direct vs indirect)) and annealing parameters on polymer-coated cardboards' structures are investigated. The annealing pressure only reduced the coated cardboard thickness, while the electrospinning method influenced the overall structure by affecting both the thickness of the impregnated layer and of the remaining layer of cardboard. The mechanical properties tested by tensile test are maintained or enhanced after coating while oxygen barrier properties are largely enhanced for some samples. Decreasing the impregnated layer thickness resulted in a Young's modulus increase (+3 to +23%) and a decrease in stress at break (-40 to -70%), highlighting the impact of polymer-coated cardboards's structures on their mechanical properties., The authors acknowledge the MICIN/AEI/10.13039/501100011033 by “ERDF A way of making Europe” [project number PID2021-128749OB-C31], and the University of Montpellier through the excellence program I-SITE and the APP EXPLORE #4 for the funding of the research mobility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun-derived cashew gum/poly(vinyl alcohol) films as high‑oxygen-barrier flexible food packaging

  • Grumi, Mattia
  • Kramar, Ana
  • Gozalbo, Anna Marín
  • Prieto López, Cristina
  • Cabedo, Luis
  • Lagarón, José M.
In the search for sustainable alternatives to fossil-based packaging, valorizing underutilized polysaccharides is often limited by trade-offs between mechanical performance and barrier properties. This work presents a previously underexplored route to convert cashew gum (CG), an abundant agro-industrial by-product, into high-performance continuous films by blending it with poly(vinyl alcohol) (PVOH), electrospinning, and thermal annealing of fibers. Three formulations were developed targeting high CG content (over 30% w/w) and electrospinning stability. The influence of solution properties (polymer ratio and additives, polyethylene oxide (PEO), and glycerol), morphology, and structure on film performance was investigated. Two formulations produced continuous, non-porous films, whereas the formulation with the highest CG content and lowest PEO content retained some internal porosity. The films exhibited UV-blocking ability (up to 90%), high elongation at break (>200%), and excellent oxygen barrier properties at low humidity (0% RH and 25% RH) and moderate barrier properties at 60% RH. At 0% RH, permeability was below the detection limit, whereas at 25% RH, it reached 3 × 10-21 m3·m·m-2·s-1·Pa-1, comparable to fossil-based high-barrier materials. Water vapor permeability depended on blend composition, with the lowest value being 4 × 10-14 kg·m·m-2·s-1·Pa-1. The biodegradation of the films reached 65-80% after 65 d under composting and 36-41% after 115 d in soil, increasing with CG content. These results demonstrate the feasibility of using underutilized agro-industrial by-products to produce flexible CG/PVOH films with high oxygen barrier performance under dry and semi-dry conditions, supporting their further development as candidate barrier materials for food-packaging systems., This research was funded by PID2021-128749OB-C31, funded by MICIU/AEI/10.13039/501100011033, and by ERDF - a way of making Europe, and by INNEST/2022/25, funded by Agencia Valenciana de Innovación (AVI). M.G. acknowledges the MICIU for supporting the FPI fellowship (PRE2022-103132). The authors also acknowledge the “Polymer Technology” Joint Unit between IATA (CSIC)-UJI and CSIC-PTI SusPlast., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed