Pasar al contenido principal

Novel Processes and Materials for Food Preservation in the frame of the Circular Bioeconomy

RYC2019-027784-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of copolyamide 1010/410 with varying putrescine contents for meat packaging applications

  • Pacheco-Romeralo, Marta|||0000-0002-7132-2344
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Hernandez-Garcia, Eva
  • Martinez de Ilarduya, Antxon
  • Janani, Ronak
  • Sammon, Chris
[EN] Acting on the Bioeconomy strategy, this study has developed fully bio-based copolyamide 1010/410 (PA1010/410) from "nylon salts" derived from renewable putrescine, decamethylenediamine, and sebacic acid monomers. Different fully bio-based copolyamides were synthetized by the polycondensation reaction of nylon 1010 salt with 12.5, 25, and 37.5 mol% of nylon 410 salt. Thereafter, the resultant PA1010/410 grades were shaped into 150-mu m films by thermo-compression and characterized. Results showed that the putrescine content presents a strong influence on the molecular weight, crystallinity and, hence, thermal, mechanical, and barrier properties of PA1010/410. In particular, it was observed that the introduction of nylon 410 contents at 25 and 37.5 mol% resulted in PA1010/410 grades in the 2-3 x 104 g mol-1 range, with a crystallinity as low as similar to 15%. Interestingly, these copolyamide compositions led to transparent films melting at nearly 180 degrees C, being highly ductile with elongation at break of up to 130% and improved barrier to oxygen with a permeability as low as 5.3 x 10-19 m3 m m-2 Pa-1 s-1. These green nylons were finally applied as lid films in trays to preserve beef meat, and were shown to successfully extend food shelf life beyond those of current commercial monolayer solutions based on petrochemical polymers, thereby showing their potential for use in sustainable food packaging., This research was supported by PID2021-128749OB-C33 from the Spanish Ministry of Science and Innovation (MICI) and INNVA1/2024/106 and EDGJID/2021/290 both from the Generalitat Valenciana (GVA). Sergio Torres-Giner acknowledges MICI for his "Ramon y Cajal" contract (RYC2019-027784-I) for funding and financial support during the research stay at Sheffield Hallam University. Eva Hernandez-Garcia thanks the support of her "Margarita Salas" Postdoctoral Fellowship funded by the European Union-Next Generation EU program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lid Films of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Microfibrillated Cellulose Composites for Fatty Food Preservation

  • Hernandez-Garcia, Eva
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present work evaluates the food packaging performance of previously developed films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced with atomized microfibrillated cellulose (MFC) compatibilized by a reactive melt-mixing process. To this end, the novel green composite films were originally applied herein as lids in aluminum trays to preserve two dissimilar types of fatty foods, namely minced pork meat and sunflower oil. Results indicated that the PHBV/MFC films effectively preserved the physicochemical and microbiological quality of pork meat for one week of storage at 5 ¿C. In particular, the compatibilized green composite lid film yielded the lowest weight loss and highest oxidative stability, showing values of 0.935% and 0.78 malonaldehyde (MDA)/kg. Moreover, none of the packaged meat samples exceeded the acceptable Total Aerobial Count (TAC) level of 5 logs colony-forming units (CFU)/g due to the improved barrier properties of the lids. Furthermore, the green composite films successfully prevented sunflower oil oxidation in accelerated oxidative storage conditions for 21 days. Similarly, the compatibilized PHBV/MFC lid film led to the lowest peroxide value (PV) and conjugated diene and triene contents, with respective values of 19.5 meq O2/kg and 2.50 and 1.44 g/100 mL. Finally, the migration of the newly developed PHBV-based films was assessed using two food simulants, proving to be safe since their overall migration levels w, This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2021-128749OB-C33.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrohydrodynamic processing for the production of zein-based microstructures and nanostructures

  • Silva, Pedro M.
  • Vicente, Antonio A.
  • Cerqueira, Miguel A.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Recently, plant-derived proteins have increased in interest and use owing to a combination of interesting properties and industry-wide trends to replace animal-derived proteins. Electrohydrodynamic processing can be used to develop microstructures and nanostructures of plant proteins in a facile manner and, thus, increase their opportunities in the food, pharmaceutical, and biomedical industries. One of the most currently studied and promising plant proteins is zein. This review covers the most studied strategies to produce electrospun and electrosprayed zein-based structures. The most relevant properties, such as size, morphology, and surface area, are discussed as per the potential areas of interest, for instance, in the food, biomedical, and pharmaceutical industries. In addition, applications of other electrospun/electrosprayed plant-derived proteins are also presented, confirming the increasing interest of different industries in alternative proteins which can help promote sustainability., This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of the UIDB/ 04469/2020 unit and by the I&D&I AgriFood XXI project, operation number NORTE-01-0145-FEDER-000041, cofinanced by the European Regional Development Fund (FEDER) under the scope of NORTE 2020 (Programa Operacional Regional do Norte 2014/2020). This study was supported by the project cLabelþ (POCI-01-0247-FEDER-046080) cofinanced by Compete 2020, Lisbon 2020, Portugal 2020 and the European Union, through the European Regional Development Fund (ERDF). Pedro Silva is the recipient of a fellowship (SFRD/BD/130247/2017) supported by Fundacao para a Ciencia e a Tecnologia, (FCT, Portugal). S. Torres-Giner acknowledges Spanish Ministry of Science and Innovation (MICI) for the funding received during his Ramon y Cajal contract (RYC2019-027784-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Pressure Catalytic Hydrogenation of Renewable Succinic Acid to 1,4-Butanediol for the Synthesis of Fully Bio-Based Poly(butylene succinate)

  • Flores-Fernández, Yaiza
  • Pacheco-Romeralo, Marta|||0000-0002-7132-2344
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Mboumba, Effie
  • Alla, Abdelilah
  • Lagaron Cabello, José María
  • López Granados, Manuel
  • Martínez de Ilarduya, Antxon
  • Perret, Noémie
[EN] The present study puts the circular Bioeconomy Concept into action by synthesizing biodegradable poly(butylene succinate) (PBS) by the polycondensation reaction of renewable succinic acid (SA) and 1,4-butanediol (BDO). To achieve this, SA was first obtained from furfural derived from biomass, which was gas-phase oxidized to produce maleic acid that was thereafter hydrogenated with a formic acid (FA)-containing water solution. After that, the resultant SA was subjected to catalytic hydrogenation at high pressure to yield BDO. Thus, the polymerization of both renewable monomers was successfully performed in two steps, namely esterification and transesterification, leading to PBS with a similar molecular weight and physical performance to current petrochemical grades commercially available. Finally, the fully bio-based PBS was thermo-compressed into films and originally applied as thermo-sealed bags to package beef meat, successfully achieving food preservation for up to 8 days under refrigeration conditions. Therefore, the resultant biopolyester represents a highly sustainable technical solution in the development of biodegradable food packaging materials, enabling the sourcing of its monomers completely from biomass., This research was supported by PID2021-128749OB-C33 and RYC2019-027784-I from the Spanish Ministry of Science and Innovation (MICI), and INNVA1/2024/106 and EDGJID/2021/290 from the Generalitat Valenciana (GVA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo-Figuerez, María
  • Prieto, Cristina
  • Arnal, Carmen
  • Cabedo, Luis
  • Lagaron, José M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-BC1 and PID2021-128749OB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-Compressed Films of Poly(butylene succinate) Reinforced with Cellulose Fibers Obtained from Rice Straw by Green Extraction Methods

  • Olivas-Alonso, Carmen
  • Vieira-De Freitas, Pedro Augusto
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In this study, two green extraction methods are explored to valorize rice straw into cellulose fibers (CFs), namely subcritical water extraction (SWE) and combined ultrasound-heating treatment (USHT). The resultant fibers are, thereafter, successfully pretreated with (3-glycidyloxypropyl) trimethoxysilane (GPS) and incorporated at 3% wt into poly(butylene succinate) (PBS) by melt-mixing. The green composites are shaped into films by thermo-compression and characterized in terms of their performance for food packaging applications. The chemical analysis of the fibers reveals that SWE is more effective to selectively remove hemicelluloses than USHT, whereas silanization promotes the removal of lignin in both fiber types. Fiber incorporation, more notably in the case of the silanized fibers, restricts the movement of the PBS chains, indicating good interaction with the biopolyester matrix. In particular, CFs act as antinucleating agents in PBS, delaying both glass transition and crystallization from the melt phenomena and hindering crystal formation. Furthermore, the fibers mechanically reinforce and improve the oxygen barrier of the PBS films. The highest barrier enhancement is obtained for the thermo-compressed composite film with silanized fibers obtained by SWE, yielding a decrease of nearly 20% in the permeability to oxygen versus the unfilled PBS film.; Valorization of rice straw by green extraction methods, namely subcritical water extraction and combined ultrasound-heating treatment, leads to cellulose fibers. These fibers can be silanized and thereafter incorporated into poly(butylene succinate) by melt-mixing. The resultant green composites can be shaped by thermo-compression into films with improved rigidity and enhanced oxygen barrier, being of interest in food packaging applications. image, This research was funded by the Spanish Ministry of Science and Innovation (MICI), Grant No. PID2021-128749OB-C33, and Generalitat Valenciana (GVA), Grant Nos. AGROALNEXT/2022/026 and CIPROM/2021/071. Sergio Torres-Giner also acknowledged the financial support received during his Ramon y Cajal contract (RYC2019-027784-I) and Carmen Olivas-Alonso during her PhD scholarship (No. CIACIF/2021/422).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Liquor Waste Derived Spent Coffee Grains for the Development of Injection-Molded Polylactide Pieces of Interest as Disposable Food Packaging and Serving Materials

  • Terroba-Delicado, Enrique
  • Fiori, Stefano
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Montanes, Nestor|||0000-0001-6070-127X
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present work puts the Circular Bioeconomy's concept into action, originally valorizing residues of spent coffee grains from the beverage liquor coffee industry to develop green composite pieces of polylactide (PLA). The as-received spent coffee grains were first milled to obtain the so-called spent coffee grounds (SCGs) that were, thereafter, incorporated at 20 wt.% into PLA by extrusion. Finally, the resultant green composite pellets were shaped into pieces by injection molding. Moreover, two oligomers of lactic acid (OLAs), namely OLA2 and OLA2(mal), the latter being functionalized with maleic anhydride (MAH), were added with SCGs during the extrusion process at 10 wt.%. The results show that, opposite to most claims published in the literature of green composites of PLA, the incorporation of the liquor waste derived SCGs increased the ductility of the pieces by approximately 280% mainly due to their high lipid content. Moreover, the simultaneous addition of OLA2 and OLA2(mal) further contributed to improve the tensile strength of the green composite pieces by nearly 36% and 60%, respectively. The higher performance of OLA2(mal) was ascribed to the chemical interaction achieved between the biopolyester and the lignocellulosic fillers by the MAH groups. The resultant green composite pieces are very promising as disposable food-serving utensils and tableware., The authors wish to thank the Spanish Ministry of Science and Innovation (MICI), grant number MEN PID2020-116496RB-C22, for funding this research. S. Torres-Giner acknowledges the Spanish Ministry of Science and Innovation (MICI) for the funding received during his Ramón y Cajal contract (RYC2019-027784-I) and J. GomezCaturla wishes to thank UPV for his FPI grant (SP20200080). Condensia Condensia Química Inc. (Barcelona, Spain) and Licores Sinc S.A. (Alcoy, Spain) are both acknowledged for generously providing the raw materials. The authors are also grateful to the microscopy services at UPV for their help in collecting and analyzing the FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Fully Bio-Based Butylene Succinate Oligomers with Varying Molecular Weights for Sustainable Food Packaging Applications

  • Olivas-Alonso, Carmen
  • Flores-Fernández, Yaiza
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Martinez de Ilarduya, Antxon
[EN] The development of bio-based and biodegradable materials is critical for reducing environmental impact and addressing global challenges associated with the extensive use of plastics in packaging applications. In this study, linear oligomers of butylene succinate (OBS) with three different molecular weights were synthesized using succinic acid (SA) and 1,4-butanediol (BDO), both monomers derived from biomass. The synthesized fully bio-based OBS samples were characterized in terms of their molecular structure, degree of polymerization, crystallinity, and thermal properties, showcasing their potential as additives for biopolymers in food packaging. Oligomers with weight-average molecular weight (Mw) values of 2050 g<middle dot>mol-1 (OBS-L), 16,150 g<middle dot>mol-1 (OBS-M), and 33,147 g<middle dot>mol-1 (OBS-H), and & ETH; values in the 1.7-1.8 range were successfully synthesized. The results showed that the thermal degradation stability of OBS slightly increased, while the crystallinity decreased with increasing molecular weight. Furthermore, the analysis of the evolution of the lattice parameters suggested that oligomers with shorter chains favored crystal organization, resulting in a crystal unit cell with denser packing., This research was funded by the Spanish Ministry of Science and Innovation (MICI), Grant No. PID2021-128749OB-C33, and Generalitat Valenciana (GVA), Grant Nos. AGROALNEXT/2022/026 and CIPROM/2021/071. Sergio Torres-Giner also acknowledges the financial support received during his Ramon y Cajal contract (RYC2019-027784-I) and Carmen Olivas-Alonso during her PhD scholarship (No. CIACIF/2021/422).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of copolyamide 1010/410 with varying putrescine contents for meat packaging applications

  • Pacheco-Romeralo, Marta|||0000-0002-7132-2344
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Hernandez-Garcia, Eva
  • Martínez de Ilarduya, Antxon
  • Janani, Ronak
  • Sammon, Chris
[EN] The Bioeconomy strategy was followed in the present study to develop fully bio-based copolyamide 1010/410 (PA1010/410) from ¿nylon salts¿ derived from renewable putrescine, decamethylenediamine, and sebacic acid monomers. Different copolyamides were synthetized by the polycondensation reaction of nylon 1010 salt with 12.5 mol%, 25 mol%, and 37.5 mol% of nylon 410 salt. Thereafter, the resultant PA1010/410 grades were shaped into 150-µm films by thermo-compression and characterized. Results showed that the putrescine content presents a strong influence on the molecular weight, crystallinity and, hence, thermal, mechanical, and barrier properties of PA1010/410. In particular, it was observed that the introduction of nylon 410 content at 25 and 37.5 mol% resulted in PA1010/410 grades in the 2¿3 × 104 g/mol range, with a crystallinity as low as ~15%. Interestingly, these copolyamide compositions led to transparent films melting at nearly 180 °C, being highly ductile with elongation at break of up to 130% and improved barrier to oxygen with a permeability as low as 5.3 × 10-19 m3·m/m2·Pa·s. These green nylons were finally applied as lid films in trays to preserve beef meat, and were shown to successfully extend food shelf life beyond those of current commercial monolayer solutions based on a petrochemical polymer., This research was supported by PID2021-128749OB-C33 from the Spanish Ministry of Science and Innovation (MICI) and INNVA1/2024/106 and EDGJID/2021/290 both from the Generalitat Valenciana (GVA). Sergio Torres-Giner acknowledges MICI for his "Ramon y Cajal" contract (RYC2019-027784-I) for funding and financial support during the research stay at Sheffield Hallam University. Eva Hernandez-Garcia thanks the support of her "Margarita Salas" Postdoctoral Fellowship funded by the European Union-Next Generation EU program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Atomization of Microfibrillated Cellulose and Its Incorporation into Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Reactive Extrusion

  • Vieira-De Freitas, Pedro Augusto
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Barrasa, Hector
  • Vargas, Fátima
  • Rivera, Daniel
[EN] The present study focuses on the preparation and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films that were reinforced with cellulose microstructures to obtain new green composite materials for sustainable food packaging applications. The atomization of suspensions of microfibrillated cellulose (MFC) successfully allowed the formation of ultrathin cellulose structures of nearly 3 µm that were, thereafter, melt-mixed at 2.5, 5, and 10 wt % with PHBV and subsequently processed into films by thermo-compression. The most optimal results were attained for the intermediate MFC content of 5 wt %, however, the cellulose microstructures showed a low interfacial adhesion with the biopolyester matrix. Thus, two reactive compatibilizers were explored in order to improve the properties of the green composites, namely the multi-functional epoxy-based styrene-acrylic oligomer (ESAO) and the combination of triglycidyl isocyanurate (TGIC) with dicumyl peroxide (DCP). The chemical, optical, morphological, thermal, mechanical, and barrier properties against water and aroma vapors and oxygen were analyzed in order to determine the potential application of these green composite films in food packaging. The results showed that the incorporation of MFC yielded contact transparent films, whereas the reactive extrusion with TGIC and DCP led to green composites with enhanced thermal stability, mechanical strength and ductility, and barrier performance to aroma vapor and oxygen. In particular, this compatibilized green composite film was thermally stable up to ~280 °C, whereas it showed an elastic modulus (E) of above 3 GPa and a deformation at break (¿b) of 1.4%. Moreover, compared with neat PHBV, its barrier performance to limonene vapor and oxygen was nearly improved by nine and two times, respectively., This research was funded by Spanish Ministry of Science and Innovation (MICI), grant numbers PID2019-105207RB-I00 and RTC2019-007268-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multilayer Sheets Based on Double Coatings of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) on Paper Substrate for Sustainable Food Packaging Applications

  • Hernandez-Garcia, Eva
  • Zomeño, Pedro
  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This work reports on the development and performance evaluation of newly developed paper sheets coated, on both sides, with thin films of biodegradable poly(3-hydroxybutyrate-co-3- hydroxyvalerate) (PHBV) for applications of food packaging. For this, PHBV/paper/PHBV multilayers were first prepared by the thermo-sealing technique, optimizing the process variables of temperature and time. Thereafter, the multilayer sheets were characterized in terms of their morphological, optical, thermal, mechanical, and barrier properties and compared with equivalent paper structures double coated with high-barrier multilayer films of petrochemical polymers. The results indicated that the double coatings of PHBV successfully improved the mechanical resistance and ductility, protected from moisture, and also reduced the aroma and oxygen permeances of paper, having a minimal effect on its optical and thermal properties. Finally, the compostability of the resultant multilayer sheets was analyzed, confirming that the presence of the PHBV coatings slightly delayed the aerobic biodegradation and disintegration of paper., This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2021-128749OB-C33 and the Valencian Innovation Agency (AVI) through the TERMOFIB project (INNVA1/2020/46). E.H.-G. and S.T.-G. acknowledge MICI for her predoctoral research grant (BES 2017-082040) and Ramón y Cajal for his contract (RYC2019-027784-I), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of polyamide 1010 and evaluation of its cast-extruded films for meat preservation

  • Hernandez-Garcia, Eva
  • Pascual-Ramírez, Leonor
  • Pacheco-Romeralo, Marta|||0000-0002-7132-2344
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This study holistically evaluates the potential of polyamide 1010 (PA1010) in the form of monolayer films for meat preservation applications. First, decamethylenediamine and sebacic acid, both derived from natural and renewable castor oil, were used to form a "nylon salt" that was subsequently polymerized at 230 degrees C by condensation reaction, yielding high-molecular-weight (MW) PA1010. The resulting fully bio-based polyamide was, thereafter, processed into 145-mu m films by cast extrusion and characterized to ascertain their effectiveness in food packaging. Results showed that the PA1010 films were highly transparent, thermally stable up to approximately 340 degrees C, and very balanced in terms of mechanical strength and ductility, breaking at elongations higher than 150%. The permeability tests revealed that the PA1010 films present a high barrier to water and aroma vapors and a medium barrier to oxygen. Interestingly, the oxygen barrier performance of PA1010 presented low moisture dependence, outperforming currently available biopolymers. Finally, the PA1010 films were applied to package fresh pork fillets in thermosealed bags, proving to be effective in preserving the physicochemical and microbiological quality of meat for up to seven days of storage at 5 degrees C., This work was carried out with the financial support of the Ramon y Cajal contract (RYC2019-027784-I) from the Spanish Ministry of Science and Innovation (MICI) and the program "Garantia Juvenil"(EDG-JID/2021/290) from Generalitat Valenciana (GVA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance Enhancement of Biopolyester Blends by Reactive Compatibilization with Maleic Anhydride-Grafted Poly(butylene succinate-co-adipate)

  • Samaniego-Aguilar, Kerly
  • Sanchez-Safont, Estefania
  • Pisa-Ripoll, Ignacio
  • Lagaron, Jose M.
  • Cabedo, Luis
  • Gamez-Perez, Jose
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Flores-Fernández, Yaiza
[EN] Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a very promising biodegradable copolyester of high interest in food packaging. Its inherent brittleness and narrow processing window make it necessary to blend it with flexible biopolyesters, such as poly(butylene succinate-co-adipate) (PBSA). However, the resultant biopolyester blends are thermodynamically immiscible, which impairs their performance and limits their applications. This study is the first to explore the use of poly(butylene succinate-co-adipate) grafted with maleic anhydride (PBS-g-MAH) as a novel reactive additive to compatibilize PHBV/PBSA blends. The compatibilizer was prepared by a reactive melt-mixing process of PBSA and maleic anhydride (MAH) using dicumyl peroxide (DCP) as an organic radical initiator, achieving a grafting degree (G(d)) of 5.4%. Biopolyester blend films were thereafter prepared via cast extrusion and their morphological, thermal, mechanical, and barrier properties were characterized. Compatibilization by PBSA-g-MAH was confirmed by observing an improved phase interaction and lower dispersed domain sizes in the blends with 15 wt% PBSA. These compatibilized PHBV/PBSA blends were thermally stable up to 285 degrees C, showed enhanced ductility and toughness, as well as providing an improved barrier against water and limonene vapors and oxygen. These findings suggest that the use of MAH-grafted biopolyesters can represent an effective strategy to improve the properties of biopolyester blends and open up new opportunities for the application of PHBV-based formulations for food packaging., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER "Una manera de hacer Europa", project number PID2021-128749OB-C32. This work is also part of the project PDC2022-134006-C22, funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Kerly Samaniego Aguilar would like to acknowledge MCIN/AEI/10.13039/501100011033 and FSE "El FSE invierte en tu futuro" for her FPI fellowship (PRE2019-091448). S.T.-G. acknowledges MICI for his Ramon y Cajal contract (RYC2019-027784-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative solutions and challenges to increase the use of poly(3-hydroxybutyrate) in food packaging and disposables

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Arrieta, Marina P.
[EN] Poly(3-hydroxybutyrate) (PHB) has gain in recent years a huge interest in the food packaging field due to its renewable origin from waste as well as non-food crops, high mechanical strength, medium-to-high barrier performance, and inherent biodegradability in natural environments. Despite these advantages, PHB also shows a narrow processing window and high brittleness since this homopolyester shows low thermal stability and high crystallinity, limiting its industrial application. The present review provides an updated state of the art of the most relevant aspects in terms of processing and properties of PHB materials with a particular emphasis for their use in sustainable food packaging. It also describes the most potential strategies that can be applied to improve both the processability and mechanical properties of PHB, including the melt blending with green plasticizers and flexible biodegradable polymers as well as the development of more ductile co-polyesters. Finally, the waste management of the newly developed PHB-based articles is discussed, from their potential compostability to develop more biopolymers to more economically favored alternatives such as mechanical and chemical recycling technologies., This work was funded by the Spanish Ministry of Science and Innovation (MICINN, Spain), grant PID2021-123753NA-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union"; Comunidad de Madrid (Spain) by CIRCULAGROPLAST, a research Project that has been funded by the Comunidad de Madrid through the call Research Grants for Young Investigators from Universidad Politécnica de Madrid; as well as by the Generalitat Valenciana (Spain) through the BEST Program (CIBEST/2021/94). S. Torres-Giner acknowledges the Spanish Ministry of Science and Innovation (MICINN, Spain) for his Ramón y Cajal contract (RYC2019-027784-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Management of Operational Parameters and Novel Spinneret Configurations for the Electrohydrodynamic Processing of Functional Polymers

  • Silva, Pedro M.
  • Vicente, Antonio A.
  • Cerqueira, Miguel A.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Functional materials have become key drivers in the development of multiple high-end technologies. Electrohydrodynamic processing (EHDP) is a straightforward method to generate polymer micro- and nanostructures that can be applied to the food, pharmaceutical, environmental, and biomedical areas, among others, since these can yield materials with higher performance. Some of the EHDP's advantages over other polymer processing technologies rely on its high versatility, by which the final assembly can be modified in different ways to combine materials with multiple properties and also in different morphological structures, and the use of room processing conditions, meaning that thermolabile ingredients can be incorporated with minimal activity loss. This review provides the historical background, process basics, and the state-of-the-art of the most recent advances achieved in the EHDP technology dealing with the control of its operational parameters to optimize processability and achieve end-product quality and homogeneity. It also focuses on the newly developed modes of operation and spinneret configurations that can lead to the formation of a wide range of micro- and nanostructures with different functionalities and solve some of its current technical limitations. Finally, it also further highlights the potential applications of the resultant hierarchical functional polymer-based materials obtained by these novel EHDP methods., This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UIDB/04469/2020 unit and by the I&D&I AgriFood XXI project, operation number NORTE-01-0145-FEDER-000041, co-financed by the European Regional Development Fund (FEDER) under the scope of NORTE 2020 (ProgramaOperacional Regional do Norte 2014/2020). Pedro Silva is the recipient of a fellowship (SFRD/BD/130247/2017) supported by FCT. S. TorresGiner acknowledges Spanish Ministry of Science and Innovation (MICI) for the funding received during his Ramon y Cajal contract (RYC2019027784-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Use of Phenolic Compounds Present in Citrus Fruits and Grapes as Natural Antioxidants for Thermo-Compressed Bio-Based High-Density Polyethylene Films

  • Rojas-Lema, Sandra Paola
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This study originally explores the use of naringin (NAR), gallic acid (GA), caffeic acid (CA), and quercetin (QUER) as natural antioxidants for bio-based high-density polyethylene (bio-HDPE). These phenolic compounds are present in various citrus fruits and grapes and can remain in their leaves, peels, pulp, and seeds as by-products or wastes after juice processing. Each natural additive was first melt-mixed at 0.8 parts per hundred resin (phr) of bio-HDPE by extrusion and the resultant pellets were shaped into films by thermo-compression. Although all the phenolic compounds colored the bio-HDPE films, their contact transparency was still preserved. The chemical analyses confirmed the successful inclusion of the phenolic compounds in bio-HDPE, though their interaction with the green polyolefin matrix was low. The mechanical performance of the bio-HDPE films was nearly unaffected by the natural compounds, presenting in all cases a ductile behavior. Interestingly, the phenolic compounds successfully increased the thermo-oxidative stability of bio-HDPE, yielding GA and QUER the highest performance. In particular, using these phenolic compounds, the onset oxidation temperature (OOT) value was improved by 43 and 41.5 ºC, respectively. Similarly, the oxidation induction time (OIT) value, determined in isothermal conditions at 210 ºC, increased from 4.5 min to approximately 109 and 138 min. Furthermore, the onset degradation temperature in air of bio-HDPE, measured for the 5% of mass loss (T5%), was improved by up to 21 ºC after the addition of NAR. Moreover, the GA- and CA-containing bio-HDPE films showed a high antioxidant activity in alcoholic solution due to their favored release capacity, which opens up novel opportunities in active food packaging. The improved antioxidant performance of these phenolic compounds was ascribed to the multiple presence of hydroxyl groups and aromatic heterocyclic rings that provide these molecules with the features to permit the delocalization and the scavenging of free radicals. Therefore, the here-tested phenolic compounds, in particular QUER, can represent a sustainable and cost-effective alternative of synthetic antioxidants in polymer and biopolymer formulations, for which safety and environmental issues have been raised over time, This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project number MAT2017-84909-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organocatalyzed closed-loop chemical recycling of thermo-compressed films of poly(ethylene furanoate)

  • Gabirondo, Elena
  • Meléndez-Rodríguez, Beatriz
  • Arnal, Carmen
  • Lagaron, Jose M.
  • Martínez de Ilarduya, Antxon
  • Sardon, Haritz
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Monomers obtained from renewable feedstocks have emerged as a sustainable alternative to petroleum derived polymers. One of the biomass derived polyesters that has recently been gaining attention as an alternative to petrochemical polyethylene terephtalate (PET) for food and beverage packaging applications is poly(ethylene furanoate) (PEF). However, similar to PET, PEF is not biodegradable or compostable and its end-of-life options must be thus considered to avoid contributing to the accumulation of plastic waste. In this manuscript, PEF films were first produced using thermo-compression, an industrially relevant processing method, and their thermal, mechanical, and barrier properties were determined and compared to those of PET and other biopolyesters to ascertain their suitability for food packaging. Thereafter, the chemical glycolysis of PEF film waste was investigated using a sustainable and thermally stable acid-base organocatalyst. After succesfully deconstructing PEF into bis(2-hydroxyethyl)-furan-2,5-dicarboxylate (BHEF), the obtained BHEF diester was used to resynthesize PEF using the same catalyst to generate a new biopolyester with similar thermal properties to the virgin one in a closed-loop cycle., The authors thank for technical and human support provided by IZO-SGI SGIker of UPV/EHU and European funding (ERDF and ESF). Authors gratefully acknowledge financial support from Spanish Ministry of Science and Innovation (MICI) through projects MAT2017-83373-R and RTI 2018-097249-B-C21. S. T.-G. acknowledges MICI for the funding received during his previous Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) and his current Ramon y Cajal contract (RYC2019-027784-I). A. M. I. acknowledges Prof. Cor Koning for the SSP reactor donated to POL group of Barcelona. Authors also thank India Glycols Ltd for kindly supplying bio-EG.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Peroxide-Induced Synthesis of Maleic Anhydride-Grafted Poly(butylene succinate) and Its Compatibilizing Effect on Poly(butylene succinate)/Pistachio Shell Flour Composites

  • Rojas-Lema, Sandra Paola
  • Arévalo-Aguado, Jordi|||0000-0002-0669-0933
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Framing the Circular Bioeconomy, the use of reactive compatibilizers was applied in order to increase the interfacial adhesion and, hence, the physical properties and applications of green composites based on biopolymers and food waste derived lignocellulosic fillers. In this study, poly(butylene succinate) grafted with maleic anhydride (PBS-g-MAH) was successfully synthetized by a reactive melt-mixing process using poly(butylene succinate) (PBS) and maleic anhydride (MAH) that was induced with dicumyl peroxide (DCP) as a radical initiator and based on the formation of macroradicals derived from the hydrogen abstraction of the biopolymer backbone. Then, PBS-g-MAH was used as reactive compatibilizer for PBS filled with different contents of pistachio shell flour (PSF) during melt extrusion. As confirmed by Fourier transform infrared (FTIR), PBS-g-MAH acted as a bridge between the two composite phases since it was readily soluble in PBS and could successfully form new esters by reaction of its multiple MAH groups with the hydroxyl (-OH) groups present in cellulose or lignin of PSF and the end ones in PBS. The resultant compatibilized green composites were, thereafter, shaped by injection molding into 4-mm thick pieces with a wood-like color. Results showed significant increases in the mechanical and thermomechanical rigidity and hardness, meanwhile variations on the thermal stability were negligible. The enhancement observed was related to the good dispersion and the improved filler-matrix interfacial interactions achieved by PBS-g-MAH and also to the PSF nucleating effect that increased the PBS's crystallinity. Furthermore, water uptake of the pieces progressively increased as a function of the filler content, whereas the disintegration in controlled compost soil was limited due to their large thickness., This research was funded by the Ministry of Science and Innovation (MICI) project number MAT2017-84909-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Rice Straw into Cellulose Microfibers for the Reinforcement of Thermoplastic Corn Starch Films

  • Vieira-De Freitas, Pedro Augusto
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
  • La Fuente Arias, Carla I.
[EN] In the present study, agro-food waste derived rice straw (RS) was valorized into cellulose microfi-bers (CMFs) using a green process of combined ultrasound and heating treatments and were, thereafter, used to improve the physical properties of thermoplastic starch films (TPS). Mechanical defibrillation of the fibers gave rise to CMFs with cumulative frequencies of length and diameters below 200 and 5¿15 µm, respectively. The resultant CMFs were successfully incorporated by melt mixing into TPS and also starch subjected to dry heating (DH) modification to yield TPS modified by dry heating (TPSDH) by thermo-compression and characterized. It was observed that both DH modification and fiber incorporation at 3 and 5 wt% loadings interfered with the starch gelatini-zation, leading to non-gelatinized starch granules in the biopolymer matrix. Thermo-compressed films prepared with both types of starches that wereand reinforced with 3 wt% CMF were more rigid (percentages increases of ~215% for TPS and ~207% for the TPSDH), more resistant to break (~100% for TPS and ~60% for TPSDH), but also less extensible (~53% for TPS and ~78% for TPSDH). The incorporation of CMFs into the TPS matrix at both contents also promoted a de-crease in water vapor (~15%) and oxygen permeabilities (~30%). Finally, the TPS composite films showed low changes in terms of optical properties and equilibrium moisture, being less soluble in water than the TPSDH films., This research was funded by Spanish Ministry of Science and Innovation (MICI), grant number PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the Scientific Literacy of Food Engineering Students in Electrohydrodynamic Processing by Means of Zein Solutions

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Yuste Del Carmen, Alberto|||0000-0001-7849-0220
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Electrohydrodynamic processing (EHDP) has revolutionized nanotechnology since it is a simple method for developing microstructures and nanostructures from a wide range of polymer solutions using the application of high voltages. However, EHDP has scarcely been introduced into food engineering courses at any educational level, whereas it is fundamental for professionals in the discipline. The present educational article aims to introduce, for the first time, the basis of the EHDP technology and its management to students in postgraduate courses for food emulsion and related disciplines. To this end, the document reports the step-by-step preparation of zein solutions in aqueous ethanol with varying weight protein contents and the characterization of such solutions in terms of their density, viscosity, surface tension, and conductivity. Then, the methodology also describes the processability of the resultant zein solutions using EHDP. Process parameters, including applied voltage, flow-rate, and tip-to-collector distance, were studied to optimize proper deposition of zein materials in the form of a wide range of morphologies, from nanobeads to microfibers. The attained results were related to the zein solution properties and processing conditions, which can help to understand the effect of these parameters and exemplify the potential of this technology to develop novel ultrathin food hydrocolloid structures. Finally, the application of this methodology was assessed through online surveys taken during food engineering courses and findings indicate that postgraduate students appreciate the exposure provided by the experimental activities, particularly to achieve familiarity with food hydrocolloid solutions and scientific literacy in the EHDP technology., S.T.-G. acknowledges the Spanish Ministry of Science and Innovation (MICI) for the funding received during his Ramon y Cajal contract (RYC2019-027784-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Thermoformed Bilayer Trays of Paper and Renewable Succinic Acid Derived Biopolyester Blends and Their Application to Preserve Fresh Pasta

  • Hernandez-Garcia, Eva
  • Zomeño, Pedro
  • Viscusi, Gianluca
  • Malvano, Francesca
  • Gorrasi, Giuliana
  • Pacheco-Romeralo, Marta|||0000-0002-7132-2344
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present study reports on the development by thermoforming of highly sustainable trays based on a bilayer structure composed of paper substrate and a film made of a blend of partially bio-based poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). The incorporation of the renewable succinic acid derived biopolyester blend film slightly improved the thermal resistance and tensile strength of paper, whereas its flexural ductility and puncture resistance were notably enhanced. Furthermore, in terms of barrier properties, the incorporation of this biopolymer blend film reduced the water and aroma vapor permeances of paper by two orders of magnitude, while it endowed the paper structure with intermediate oxygen barrier properties. The resultant thermoformed bilayer trays were, thereafter, originally applied to preserve non-thermally treated Italian artisanal fresh pasta, "fusilli calabresi" type, which was stored under refrigeration conditions for 3 weeks. Shelf-life evaluation showed that the application of the PBS-PBSA film on the paper substrate delayed color changes and mold growth for 1 week, as well as reduced drying of fresh pasta, resulting in acceptable physicochemical quality parameters within 9 days of storage. Lastly, overall migration studies performed with two food simulants demonstrated that the newly developed paper/PBS-PBSA trays are safe since these successfully comply with current legislation on plastic materials and articles intended to come into contact with food., This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2021-128749OB-C33, and the Valencian Innovation Agency (AVI) through the TERMOFIB project (INNVA1/2020/46).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quality and Shelf-Life Stability of Pork Meat Fillets Packaged in Multilayer Polylactide Films

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, the effectiveness of a multilayer film of polylactide (PLA), fully bio-based and compostable, was ascertained to develop a novel sustainable packaging solution for the preservation of fresh pork meat. To this end, the multilayer PLA films were first characterized in terms of their thermal characteristics, structure, mechanical performance, permeance to water and aroma vapors and oxygen, and optical properties and, for the first time, compared with two commercial high-barrier multilayer packaging films. Thereafter, the multilayers were thermosealed to package fillets of fresh pork meat and the physicochemical changes, lipid oxidation levels, and microbiological counts were monitored in the food samples during storage under refrigeration conditions. Results showed that the meat fillets packaged in PLA developed a redder color and showed certain indications of dehydration and oxidation, being more noticeably after 11 days of storage, due to the higher water vapor and oxygen permeance values of the biopolymer multilayer. However, the pH changes and bacterial growth in the cold-stored fresh pork meat samples were minimal and very similar in the three tested multilayer films, successfully accomplishing the requirements of the food quality and safety standards at the end of storage., This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2019-105207RB-I00. E.H.-G. and S.T.-G. acknowledge MICI for her predoctoral research grant (BES2017-082040) and his Ramón y Cajal contract (RYC2019-027784-I). The authors are also grateful to the Packaging Technologies Department of AINIA for the technical support provided during the determination of the multilayer structures. Derprosa is also acknowledged for gently providing the multilayer PLA film.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cellulose/hydroxyapatite composite as an innovative sustainable material for food packaging applications

  • Adzkia, Qurratu Aini Alya
  • Noviyanti, Atiek Rostika
  • Cahyana, Yana
  • Rukayadi, Yaya
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The extensive use of petrochemical-based plastics in food packaging poses environmental threats due to their nonbiodegradability and lack of antimicrobial function. As a sustainable alternative, this review investigates cellulose-based composites reinforced with hydroxyapatite (HA), focusing on their potential in food packaging. A systematic literature search was performed, using major scientific databases to identify and evaluate relevant studies. The review discusses key properties of cellulose/HA composites, emphasizing their mechanical performance, biodegradability, and antibacterial capabilities. HA, a naturally occurring bioceramic, enhances the structural strength and antimicrobial efficacy of cellulose matrices, which are derived from renewable resources. The combination of these materials offers improved food preservation by extending shelf life and providing microbial protection. The review also outlines mechanisms of action, fabrication approaches, and material interactions. Cellulose/HA composites show promising potential as eco-friendly packaging materials that align with food safety goals and environmental sustainability. However, further research is needed to optimize barrier properties, evaluate chemical safety under real-use conditions, and understand biodegradation performance across diverse environments. These insights can guide the development of next-generation bio-based packaging solutions to replace conventional plastics in the food industry., This research was funded by the Beasiswa Unggulan Pascasarjana Padjadjaran (BUPP) from Universitas Padjadjaran, No. 1811/UN6.3.1/PT.00/2024 and the Spanish Ministry of Science and Innovation (MICI), No. PID2021-128749OB-C33. Sergio Torres-Giner also acknowledged the financial support received during his Ramon y Cajal contract (RYC2019-027784-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance Enhancement of Biopolyester Blends by Reactive Compatibilization with Maleic Anhydride-Grafted Poly(butylene succinate-co-adipate)

  • Samaniego Aguilar, Kerly
  • Sánchez Safont, Estefanía
  • Pisa-Ripoll, Ignacio
  • Torres Giner, Sergio
  • Flores, Yaiza
  • Lagarón Cabello, José María
  • Cabedo, Luis
  • Gámez Pérez, José
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a very promising biodegradable copolyester of high interest in food packaging. Its inherent brittleness and narrow processing window make it necessary to blend it with flexible biopolyesters, such as poly(butylene succinate-co-adipate) (PBSA). However, the resultant biopolyester blends are thermodynamically immiscible, which impairs their performance and limits their applications. This study is the first to explore the use of poly(butylene succinate-co-adipate) grafted with maleic anhydride (PBS-g-MAH) as a novel reactive additive to compatibilize PHBV/PBSA blends. The compatibilizer was prepared by a reactive melt-mixing process of PBSA and maleic anhydride (MAH) using dicumyl peroxide (DCP) as an organic radical initiator, achieving a grafting degree (Gd) of 5.4%. Biopolyester blend films were thereafter prepared via cast extrusion and their morphological, thermal, mechanical, and barrier properties were characterized. Compatibilization by PBSA-g-MAH was confirmed by observing an improved phase interaction and lower dispersed domain sizes in the blends with 15 wt% PBSA. These compatibilized PHBV/PBSA blends were thermally stable up to 285 °C, showed enhanced ductility and toughness, as well as providing an improved barrier against water and limonene vapors and oxygen. These findings suggest that the use of MAH-grafted biopolyesters can represent an effective strategy to improve the properties of biopolyester blends and open up new opportunities for the application of PHBV-based formulations for food packaging., This research was supported by MCIN/AEI/10.13039/501100011033 and FEDER “Una manera de hacer Europa”, project number PID2021-128749OB-C32. This work is also part of the project PDC2022-134006-C22, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Kerly Samaniego Aguilar would like to acknowledge MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro” for her FPI fellowship (PRE2019-091448). S.T.-G. acknowledges MICI for his Ramón y Cajal contract (RYC2019-027784-I)., Peer reviewed