Pasar al contenido principal

USO DE ACIDOS FENOLICOS PARA LA OBTENCION DE MATERIALES MULTICAPA ACTIVOS PARA EL ENVASADO DE ALIMENTOS

PID2019-105207RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of phenolic acids on the properties of films from Poly (vinyl alcohol) of different molecular characteristics

  • Andrade, Johana
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cinnamic and ferulic acid were incorporated into highly hydrolysed and partially acetylated poly (vinyl alcohol) (PVA) for the purpose of obtaining active films. The microstructure, crystallinity, tensile and barrier properties and thermal behaviour were analysed in order to ascertain the changes provoked by phenolic acids in the film properties, depending on the kind of PVA. Phenolic acids were more compatible with the partially hydrolysed PVA. Ferulic acid led to greater changes in PVA films than cinnamic acid, promoting the crystallinity, stiffness and barrier capacity to water vapour and oxygen, although in no case the thermal stability of the polymers was affected. Films of partially hydrolysed PVA, with lower melting (170 degrees C) and higher thermodegradation (onset: 220 degrees C) temperature, could be thermoprocessed by means of the technology commonly used in the plastics industry. Therefore, the incorporation of ferulic or cinnamic acid into this matrix could be of great potential in the development of active packaging for food preservation, on the basis of the antioxidant and antimicrobial activity of phenolic acids., This work was supported by the Ministerio de Economia y Com-petitividad, Agencia Estatal de Investigacion of Spain [PID2019-105207RB-100].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antibacterial properties of cinnamic and ferulic acids incorporated to starch and PLA monolayer and multilayer films

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Ferulic (F) and cinnamic (C) acids have shown great potential as antimicrobial additives in the development of active food packaging based on biodegradable polymers. However, previous studies on thermo-processed (TP) PLA matrices with 1 or 2%w/w of these compounds found no microbial growth inhibition due to their limited release. In this study, 2 or 3% of F and C were incorporated into starch and PLA films, using several strategies to promote their release from PLA, in order to obtain effective antimicrobial activity against E. coli or L. innocua. TP starch films with F or C presented antimicrobial capacity, C being more effective than F for both bacteria and L. innocua being more sensitive to both acids. However, PLA films obtained by three different techniques: TP, thermo-processing with the addition of plasticiser (TPP), and solvent casting did not exhibit antibacterial action. The incorporation of ferulic acid methyl ester into PLA films did not improve the anti-microbial effect, which suggested that the release limitation may not be related to chemical interactions with the end chain hydroxyl of PLA. Three-layer PLA as-semblies, with an internal starch film loaded with F or C, were tested using TP-PLA, TPP-PLA, or cast-PLA films as contact layer. Diffusion of F and C through the PLA layer was highly hindered, regardless of the film preparation method. Therefore, no significant bacterial growth inhibition was observed for the three-layered films. The reduced molecular mobility in the PLA matrix was the limiting factor for the compound release and subsequent antimicrobial effect., The authors thank the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Starch-Polyester Bilayer Films with Surface-Incorporated Ferulic Acid

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayer films were developed by combining cassava starch-based films (with 10% gellan gum) and a polyester blend of polylactic acid (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) containing 75% PLA. The monolayers were obtained by melt-blending and compression-molding, and then assembled into bilayers through thermocompression. Ferulic acid (FA) was incorporated into the polyester layer by spraying and drying. The films were characterized in terms of microstructure and functional properties during two months of storage at 25 °C and 53% relative humidity. The bilayers showed improved tensile strength and barrier performance compared to the individual monolayers, making them more suitable for food packaging applications. Incorporation of FA did not significantly alter the films’ mechanical or barrier properties, but provided them with antioxidant and antibacterial activity in aqueous systems, where a complete release of FA was achieved. The physical properties of the bilayers, including thermo-sealing capacity, remained stable throughout storage. Likewise, their antioxidant and antimicrobial activities were preserved over time. Conclusion: These active bilayer films represent a sustainable packaging alternative to conventional non-biodegradable, non-recyclable synthetic laminates. Their antioxidant and antibacterial functions could help extend the shelf-life of foods while ensuring environmental compatibility., The authors thank the Agencia Estatal de Investigacion for the financial support through project PID2019-105207RB-I00. Author Eva Hernandez-Garcia is grateful for the research grant BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradation of PLA-PHBV Blend Films as Affected by the Incorporation of Different Phenolic Acids

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Films based on a 75:25 polylactic acid (PLA) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend, containing 2% (w/w) of different phenolic acids (ferulic, p-coumaric or protocatechuic acid), and plasticised with 15 wt. % polyethylene glycol (PEG 1000), were obtained by melt blending and compression moulding. The disintegration and biodegradation of the film under thermophilic composting conditions was studied throughout 35 and 45 days, respectively, in order to analyse the effect of the incorporation of the antimicrobial phenolic acids into the films. Sample mass loss, thermo-degradation behaviour and visual appearance were analysed at different times of the composting period. No effect of phenolic acids was observed on the film disintegration pattern, and the films were completely disintegrated at the end of the composting period. The biodegradation analysis through the CO2 measurements revealed that PLA-PHBV blend films without phenolic acids, and with ferulic acid, completely biodegraded after 20 composting days, while p-coumaric and protocatechuic slightly retarded full biodegradation (21 and 26 days, respectively). Phenolic acids mainly extended the induction period, especially protocatechuic acid. PLA-PHBV blend films with potential antimicrobial activity could be used to preserve fresh foodstuff susceptible to microbial spoilage, with their biodegradation under composting conditions being ensured., FundingThis research was funded by Ministerio de Ciencia e Innovacion of Spain through the Project AGL2016-76699-R, PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Starch-polyester bilayer films with phenolic acids for pork meat preservation

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Starch (S) films containing gellan gum (90:10) and polyester (P) blend films (PLA:PHBV, 75:25) with and without ferulic, p-coumaric or protocatechuic acid at 2% (w/w) were obtained by melt-blending and compression moulding for the purposes of obtaining S¿P bilayers by thermo-compressing both monolayers together. These were characterised as to their mechanical and barrier properties and as to their performance as packaging materials for pork meat slices. The incorporation of phenolic acids promoted the water vapour and oxygen barrier capacity of bilayers while reducing their stiffness and resistance to break, mainly in the case of proto- catechuic acid. Phenolic acids significantly improved the antioxidant capacity of the bilayer films, reducing the lipid oxidation of packaged meat during storage. Phenolic acid loaded bilayers also reduced the microbial counts of meat, mainly for lactic acid bacteria. These effects positively affected the development of the sample pH and colour parameters throughout storage. Active starch-polyester bilayer films exhibited great potential as a means of extending the shelf-life and improving the quality preservation of pork meat., The authors would like to thank the Spanish Agencia Estatal de Investigacion, for funding this study through Project PID2019105207RB-I00 and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical and antimicrobial properties of cassava starch films with ferulic or cinnamic acid

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Plasticised cassava starch films with 1-2% ferulic or cinnamic acid were obtained by melt blending and compression moulding. Partial losses (about 40%) of the more thermo-sensitive ferulic acid occurred during processing. Incorporation of phenolic acids did not provoke remarkable changes in the oxygen and water vapour permeability of starch films, but these became less water soluble (13-25% reduction), more extensible and less resistant to break, especially with the highest concentration of ferulic acid. Films with 2% of either acid effectively inhibited the growth of E. coli and L. innocua in tests carried out in culture medium; being cinnamic acid more effective than ferulic and L. innocua more sensitive than E. coli; a Log CFU reduction, with respect to the control, higher than 6 was obtained for L. innocua with 2% of cinnamic acid in the films. The growth of both strains was also inhibited in chicken breast (log CFU reduction>2) with 2% of either acid. In fresh-cut melon, the L. innocua growth was significantly inhibited by films with 2% cinnamic acid, but lower growth inhibition of E. coli in fresh-cut melon was observed., The authors thank the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00. Author Ramon Ordonez is grateful to the Honduras 2020 grant program for the support received.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical and active properties of poly (vinyl alcohol) films with phenolic acids as affected by the processing method

  • Andrade, Johana
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Poly (vi n y l alcohol) (PVA) films containing cinnamic acid (C) and ferulic acid (F) at 1% w/w and 2% w/w were successfully produced by solvent-casting the polymeric solution and melt blending and compression moulding. The effect of the processing method and the phenolic acid content on the microstructure, crystallinity and the optical , thermal , barrier and mechanical properties of partially hydrolysed PVA based films have been analysed, as wel l as the antioxidant and antimicrobial properties of the films. The processing method influenced the microstructural arrangement of the matrix, leading to differences in the degree of crystallinity and in the tensile and barrier properties of the films. Cast films were more stretchable and more resistant to break, while ther-moprocessed films exhibited values of oxygen and water vapou r permeability significantly higher than those obtained by casting. The incorporation of phenolic acids, especially ferulic acid, enhanced the barrier properties of the materials without affecting their thermal stability. The presence of phenolic acids in the films clearly induced the inhibition of Listeria innocua growth and had a positive antioxidant response, thus suggesting the great potential of these active materials for food packaging applications., This work was supported by the Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion of Spain [PID2019-105207RB-I00] .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the cellulose purification process on the properties of aerogels obtained from rice straw

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cellulose aerogels were obtained from purified rice straw cellulose fibres (CF) by applying different extraction methods: the conventional alkaline treatment (ALK) and alternative aqueous extraction based on the ultrasound combined with reflux heating (USHT) and subcritical water extraction (SWE) (160 and 180 degrees C). The composition and properties of the CFs were significantly affected by the purification process. The USHT treatment was as efficient as the ALK at eliminating the silica content, but the fibres maintained a notable ratio of hemicellulose (similar to 16 %). The SWE treatments were not so effective at removing silica (15 %) but greatly promoted the selective extraction of hemicellulose, especially at 180 degrees C (3 %). The CF compositional differences affected their hydrogel formation capacity and the properties of aerogels. A higher hemicellulose content in the CF led to better-structured hydrogels with better water-holding capacity, while the aerogels exhibited a more cohesive structure with thicker walls, higher porosity (99 %) and water vapour sorption capacity, but lower liquid water retention capacity (0.2 g/g). The residual silica content also interfered with the hydrogel and aerogel formation, giving rise to less structured hydrogels and more fibrous aerogels, with lower porosity (97-98 %)., The authors thank the Agencia Estatal de Investigación (Spain) for the financial support through project PID2019-105207RB-I00/AEI/10.13039/501100011033 and Generalitat Valenciana for funding the project CIPROM/2021/071 and grant GrisoliaP/2019/115.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Release and antibacterial action of phenolic acids incorporated into PHBV films

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Ferulic or p-coumaric acids were incorporated (3, 6 or 9%) into PHBV films by melt processing or surface anchoring (3-4% in the film). The release kinetics of phenolics and the films' antibacterial effect against Escherichia coli and Listeria innocua were analysed. At equilibrium, a near 100% release of phenolics was obtained from melt processed films in a low polar simulant (D1: 50% v/v ethanol in water), whereas it ranged between 10% and 38% in a more polar simulant (A: 10% v/v ethanol in water). The diffusion coefficient of FA or PCA in the matrix also rose by 4-30 times in contact with simulant D1. The limited release of the phenolics in contact with aqueous systems hindered the film's antibacterial effect in contact with the inoculated culture media. In contrast, surface-loaded films exhibited a complete release of phenolics in aqueous media and a significant (near 2 log CFU) bacterial growth inhibition., The authors would like to thank project PID2019-105207RB-I00 and the predoctoral contract PRE2020-091929 of the MCIN/AEI/10.13039/501100011033 and Generalitat Valenciana for founding the project CIPROM/2021/071 to carry out this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antifungal Polyvinyl Alcohol Coatings Incorporating Carvacrol for the Postharvest Preservation of Golden Delicious Apple

  • Sapper, Mayra
  • Martín-Esparza, M.E.|||0000-0002-0066-6748
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Different polyvinyl alcohol (PVA) coating formulations incorporating starch (S) and carvacrol (C) as the active agent were applied to Golden Delicious apples to evaluate their effectiveness at controlling weight loss, respiration rate, fruit firmness, and fungal decay against B. cinerea and P. expansum throughout storage time. Moreover, the impact of these coatings on the sensory attributes of the fruit was also analyzed. The application of the coatings did not notably affect the weight loss, firmness changes, or respiration pathway of apples, probably due to the low solid surface density of the coatings. Nevertheless, they exhibited a highly efficient disease control against both black and green mold growths, as a function of the carvacrol content and distribution in the films. The sensory analysis revealed the great persistence of the carvacrol aroma and flavor in the coated samples, which negatively impact the acceptability of the coated products., This research was funded by the Agencia Estatal de Investigacion (Spain) through the projects RTA2015-00037-C02-00 and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biofilm containing the Thymus serpyllum essential oil for rice and cherry tomato conservation

  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Sempere Ferre, Francisca
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Llorens Molina, Juan Antonio
  • Larran, Silvina
[EN] Introduction: Fungal pathogens cause major yield losses in agriculture and reduce food quality and production worldwide. Purpose: To evaluate new safer alternatives to chemicals for disease management and preserve the shelf life of food, this research was conducted to: determine the chemical composition of the essential oils (EOs) of Thymus serpyllum and Thymus piperella chemotypes 1 and 2; investigate the antifungal potential of EOs in vitro against: Alternaria alternata, Bipolaris spicifera, Curvularia hawaiiensis, Fusarium oxysporum f. sp. lycopersici, Penicillium italicum, Botryotinia fuckeliana; evaluate a natural T. serpyllum extract biofilm to conserve rice grain and cherry tomatoes. Method: EOs were analyzed by GC-MS+GC-FID. EOs' antifungal activity was evaluated by dissolving Thymus extracts in PDA. Petri dishes were inoculated with disks of each fungus and incubated at 25degree celsius for 7 days. Results: The T. serpyllum EO displayed the best Mycelial Growth Inhibition. The antifungal effect of the T. serpyllum EO biofilm was evaluated on rice caryopsis. Disinfected grains were dipped in a conidial suspension of each fungus and sprayed with EO (300 and 600 mu g/mL) prepared in Tween 20. Grains were stored. The percentage of infected grains was recorded for 30 days. The T. serpyllum EO effect on cherry tomato conservation was evaluated in vivo. Wounded fruit were immersed in the T. serpyllum EO (300 and 400 mu g/mL) and inoculated with Fusarium oxysporum f. sp. lycopersici. Fruit were evaluated for 7 and 14 days. Chemical profiles thymol/carvacrol for T. serpyllum, carvacrol for T. piperella Tp1 and thymol for T. piperella Tp2 were defined. The three evaluated EOs reduced all the studied phytopathogens' fungal growth. The T. serpyllum biofilm was effective with rice storage and against Fusarium oxysporum f. sp. lycopersici for extending the shelf life of tomatoes in warehouses and storing postharvest cherry tomatoes. Conclusion: We suggest applying these EOs as biofilms for safe food conservation to replace synthetic products., The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This work was supported by the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación de España) [grant numbers PID2019-105207RB-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of Ultrasound Pre-Treatment for Enhancing Extraction of Bioactive Compounds from Rice Straw

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The extraction of water-soluble bioactive compounds using different green methods is an eco-friendly alternative for valorizing agricultural wastes such as rice straw (RS). In this study, aqueous extracts of RS (particles < 500 mu m) were obtained using ultrasound (US), reflux heating (HT), stirring (ST) and a combination of US and ST (USST) or HT (USHT). The extraction kinetics was well fitted to a pseudo-second order model. As regards phenolic compound yield, the US method (342 mg gallic acid (GAE). 100 g(-1) RS) was more effective than the ST treatment (256 mg GAE center dot 100 g(-1) RS), reaching an asymptotic value after 30 min of process. When combined with HT (USHT), the US pre-treatment led to the highest extraction of phenolic compounds from RS (486 mg GAE center dot 100 g(-1) RS) while the extract exhibited the greatest antioxidant activity. Furthermore, the USHT extract reduced the initial counts of Listeria innocua by 1.7 logarithmic cycles. Therefore, the thermal aqueous extraction of RS applying the 30 min US pre-treatment, represents a green and efficient approach to obtain bioactive extracts for food applications., Author P.A.V.F. is grateful to Generalitat Valenciana for the GrisoliaP/2019/115 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable active materials containing phenolic acidsfor food packaging applications

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The development of new materials for food packaging applications is necessary to reduce the excessive use of disposable plastics and their environmental impact. Biodegradable polymers represent an alternative means of mitigating the problem. To add value to biodegradable materials and to enhance food preservation, the incorporation of active compounds into the polymer matrix is an affordable strategy. Phenolic acids are plant metabolites that can be found in multiple plant extracts and exhibit antioxidant and antimicrobial properties. Compared with other natural active compounds, such as essential oils, phenolic acids do not present a high sensorial impact while exhibiting similar minimal inhibitory concentrations against different bacteria. This study summarizes and discusses recent studies about the potential of both phenolic acids/plant extracts and biodegradable polymers as active food packaging materials, their properties, interactions, and the factors that could affect their antimicrobial efficiency. The molecular structure of phenolic acids greatly affects their potential antioxidant and antimicrobial capacity, as well as their specific interactions with polymer matrices and food substrates. These interactions, in turn, can lead to plasticizing or cross-linking effects. In the present study, the antioxidant and antimicrobial properties of different biodegradable films with phenolic acids have been described, as well as the main factors affecting the active properties of these films as useful materials for active packaging development. More studies applying these active materials in real foods are required., The authors thank the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00. Author Ramon Ordonez is grateful to the Honduras 2020 grant program for the support received.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multilayer antimicrobial films based on starch and PLA with superficially incorporated ferulic or cinnamic acids for active food packaging purposes

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Active packaging based on biodegradable polymers with naturally occurring active compounds, such as ferulic (F) and cinnamic (C) acids, have been studied to reduce the environmental impact of food packaging while prolonging food shelf-life. Three-layered films PLA/starch/PLA (PSP) were designed based on the complementary barrier properties of the polymers, and film systems with improved barrier properties were obtained. To promote the compound release, superficial incorporation of F or C through two coating methods was tested: film spraying with 5% ethanolic solutions of F or C and electrospinning of solutions containing PLA and active compound. Electrospinning was effective at producing fibre mats encapsulating the acids while the film spraying produced firmly attached crystalline formations of active compounds on the surface. Films coated by both electrospinning and pulverisation showed effective growth inhibition of E. coli and L. innocua. Listeria was more sensitive to both active compounds while C showed greater antibacterial activity. Electrospun films were more effective than pulverised, suggesting a greater ability to release the active compounds. Therefore, PSP laminates with surface-loaded ferulic or cinnamic acid are good materials for active food packaging, contributing to extending the food shelf life., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through project PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Essential oils from Mediterranean aromatic plants Artemisia herba-alba, Artemisia absinthium and Mentha longifolia to improve blueberry shelf life

  • Sempere Ferre, Francisca
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Llorens Molina, Juan Antonio
[EN] The Mediterranean Basin is particularly rich in aromatic plants with essential oils whose composition and properties are still to be investigated. The aims of this work were to: investigate the chemical composition of essential oils from three typical Spanish aromatic species: Artemisia herba-alba, Artemisia absinthium and Mentha longifolia; evaluate the antifungal potential of essential oils against seven plant pathogenic and postharvest fungi; analyse the effectiveness of the Mentha longifolia essential oil in extending the blueberry fruit shelf life. The main compounds for the Artemisia herba-alba essential oil were camphor (29.8%), trans-thujone (22%), 1,8-cineole (14.5%) and cis-thujone (10.8%). In the A. absithium essential oil, they were cis-cryshanthemyl acetate (35.4%), cis-beta-epoxiocimene (36%) and trans-beta-epoxiocimene (10.4%). alpha-Terpineol acetate (32.6%), pulegone (14.2%) and 8-acetoxy carvotanacetone (10.3%) were the most important molecules in the obtained composition of the Mentha longifolia essential oil. Different bioassays were performed at the 300 mu g/mL and 600 mu g/mL doses using the distinct essential oils in potato dextrose agar culture medium. The Artemisia herba-alba and Artemisia absinthium essential oils at 300 mu g/mL were not very effective. The Mentha longifolia essential oil strongly inhibited mycelial growth at the two tested doses, but it totally inhibited the growth of Curvularia hawaiiensis, Fusarium nygamai and Verticilliun dahliae at 600 mu g/mL. The blueberries coated with the Mentha longifolia essential oil solution obtained a statistically higher percentage of healthy fruit than the control. They could be considered an ecofriendly alternative for postharvest treatment, and for maintaining the quality and turgidity of these berries during storage., This work was supported by the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion de Espana) [grant numbers PID2019-105207RB-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of ferulic and cinnamic acids on the functional and antimicrobial properties in thermo-processed PLA films

  • Ordóñez-Lagos, Ramón Alberto
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The incorporation of ferulic or cinnamic acids as antimicrobial agents into PLA matrices to produce films with active properties for food packaging applications is evaluated in this study. The acids were incorporated by thermal processing at 1 and 2 wt% presenting good stability with 84¿98% retentions. The addition of acids provoked about a 5% reduction of elastic modulus and up to 20% reduction in the resistance to break in the PLA films, slightly decreasing their extensibility. Oxygen and water vapor barrier capacities were enhanced by about 6% and 45% respectively for the highest acid concentrations. The acids did not change the glass transition of the polymer but increased the thermal resistance. No significant antimicrobial activity was detected, despite the proven activity of the acids, due to their limited release into the aqueous culture media. Release kinetic studies revealed that significant release was only achieved in intermediate polarity simulant (50% aqueous ethanol), where the final percentages of the active released increased along with the total amount in the films (15% and 31%, respectively, for 2% of ferulic and cinnamic acids). Further studies are necessary to improve the compound release into food matrices and antimicrobial effectiveness., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Applying ultrasound-assisted processing to obtain cellulose fibres from rice straw to be used as reinforcing agents

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Rice straw (RS) is one of the most globally abundant agro-industrial residues. For its valorisation, a green combined ultrasound-reflux heating method was applied to obtain cellulose fibres (CF) from RS. The new method produced CF with a higher yield (37%) than the alkaline process (29%), more hydrophilic, and with a lower tendency to aggregate. Despite the slightly different degree of purification detected by the chemical and FTIR analysis, both fibres exhibited similar crystallinity, thermal behaviour, morphogeometric characteristics, and aspect ratio distributions (20¿60). Both CF showed similar reinforcing capabilities in methylcellulose/gum Arabic films, enhancing the film stretchability and resistance to break by about 33% and 20%. Non-noticeable changes in water vapour permeability and the light internal transmission were observed, indicating good compatibility CF-polymer matrix. Therefore, using the ultrasound-heating method to obtain CF is an eco-friendlier process than the alkaline treatment, supplying suitable fibres as industrial reinforcing agents., This work was supported by Generalitat Valenciana for the GrisoliaP/2019/115 Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antilisterial action of PLA films with ferulic acid as affected by the method of incorporation

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Previous studies demonstrated that polylactic acid (PLA) films with ferulic acid (F) obtained by melt blending did not release the active compound to exert effective antibacterial action. To solve this problem, different strategies to promote the active properties of PLA-F materials have been studied: film processing by casting with F up to 10% w/w, surface loading of thermoprocessed films with F, by adsorption or pulverisation with F solutions, and electrospinning of PLA-F solutions, using different solvent systems, to obtain nanostructured mats. The materials obtained were characterised by their morphological properties and antilisterial activity. F crystallised inside cast films and on the surface loaded PLA films. Electrospun materials exhibited different morphology, depending on the solvent system of the initial solution; fibre mats were obtained with ethyl acetate-DMSO mixtures, whereas bead structures were mainly formed with glacial acetic acid with or without ethyl acetate. No antilisterial activity was observed in cast films regardless of the F concentration, whereas surface loaded films by adsorption or pulverisation inhibited the listeria growth by about 4 Log (CFU/mL). Electrospun materials only inhibited bacterial growth (3 Log CFU) when these were fibre-structured. Therefore, active films of PLA with F could be only obtained when the active was surface anchored or encapsulated in thin fibre mats, with high surface to volume ratio. In this way, the release of the active compound is promoted, avoiding the problem of its limited internal diffusion through the PLA matrix., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Valorisation of rice straw by obtaining active compounds and cellulosic materials for the development of biodegradable food packaging systems

  • Vieira-De Freitas, Pedro Augusto
[ES] En esta tesis se obtuvieron fracciones celulósicas y extractos activos de paja de arroz mediante diferentes técnicas de extracción y purificación, utilizando agua como disolvente. Estas fracciones se incorporaron en películas de almidón y PLA, y en bicapas de almidón-PLA, para obtener materiales de envasado activos para extender la vida útil de diferentes alimentos. Los extractos obtenidos por combinación de ultrasonidos y calentamiento a reflujo (USHT) y con agua subcrítica (SWE) (a 160 °C (SWE-160) y 180 °C (SWE-180)) presentaron un alto contenido fenólico (37, 51 y 83 mg GAE.g-1 de extracto seco, respectivamente) y actividad antioxidante (6,3, 2,0 y 1,2 mg de extracto seco.mg-1 DPPH, respectivamente). Los extractos SWE fueron activos contra L. innocua y E. coli. Se aislaron fibras de celulosa (FC) del residuo insoluble de las diferentes extracciones. A pesar de las ligeras diferencias en el grado de purificación, los nuevos métodos dieron lugar a FCs con rendimientos más elevados que el método alcalino (35-39 % frente al 29 %), con cristalinidad (60-69 %), comportamiento térmico y relación de aspecto (20-60) similares. Se incorporaron fibras USHT al 1, 3 y 5 % (p/p) en películas termoprocesadas de almidón de maíz, y de almidón de maíz modificado térmicamente. La incorporación al 3 % dio lugar a películas con mejores propiedades funcionales. Los extractos activos (al 4, 6 y 8 % en peso) en la matriz de almidón, con o sin CF (3 %), dieron lugar a películas más extensibles y menos resistentes, con mayor capacidad de barrera al oxígeno. Las bolsas monodosis de aceite de girasol con estas películas activas y reforzadas redujeron eficazmente la oxidación. Las películas activas de PLA termoprocesado, con diferentes proporciones (2, 4 y 6 % p/p) del extracto USHT, presentaron color y propiedades mecánicas ligeramente peores, pero con mayor barrera al oxígeno. La cinética de liberación de los antioxidantes incorporados en simulantes alimentarios de diferente polaridad (A: productos acuosos; y D1: sistemas de aceite en agua), mostró que las películas con un 6% de extracto, tuvieron una capacidad antioxidante similar en simulantes con distinta polaridad. Se obtuvieron bicapas biodegradables laminando PLA, con y sin extracto USHT (6 %), y almidón termoplástico, con o sin FC USHT (3 %). Las bicapas mostraron mejor capacidad de barrera global que las monocapas. Sin embargo, la migración de compuestos entre capas dio lugar a películas menos rígidas y resistentes de lo esperado de la contribución del film de PLA. Las bicapas activas y reforzadas alargaron la vida útil de carne de cerdo refrigerada. Las películas de PLA con un 6 % (p/p) de los diferentes extractos (USHT, SWE-160 y SWE-180) presentaron menor resistencia mecánica y capacidad de barrera al vapor de agua, pero una mayor capacidad de barrera al oxígeno y a la luz UV. Además, estas películas, especialmente con el extracto SWE-180, alargaron la vida útil de la carne de cerdo refrigerada. Las FCs obtenidas con los diferentes métodos de purificación también se utilizaron para producir aerogeles de celulosa. Las diferencias composicionales afectaron a la microestructura de los aerogeles. La capacidad de absorción y de retención de agua de los aerogeles estuvo dentro de los rangos descritos para este tipo de materiales. Por tanto, fue posible obtener fracciones valorizadas de la paja de arroz, extractos activos y fibras celulósicas, útiles en el desarrollo de materiales biodegradables activos a base de almidón y PLA. Son necesarios más estudios para validar la seguridad alimentaria de los materiales, así como para el desarrollo de otras aplicaciones en el campo de la industria alimentaria o farmacéutica., [CA] En aquesta tesi doctoral es van obtenir fraccions cel·lulòsiques i extractes actius de palla d' arròs mitjançant l'aplicació de diferents tècniques d'extracció i purificació, utilitzant aigua com a dissolvent. Aquestes fraccions es van incorporar a pel·lícules de midó i PLA, i bicapes de midó-PLA, per obtenir materials d'envasament actius útils per allargar la vida útil de diferents aliments. Els extractes combinant ultrasons i escalfament a reflux (USHT) i amb aigua subcrítica (SWE) (a 160 °C (SWE-160) i 180 °C (SWE-180)) van mostrar un alt contingut fenòlic (37, 51 i 83 mg GAE.g-1 d'extracte sec, respectivament) i activitat antioxidant (6,3, 2,0 i 1,2 mg d'extracte sec.mg-1 DPPH, respectivament). Els extractes SWE van mostrar activitat antibacteriana contra L. innocua i E. coli. Es van aïllar fibres de cel·lulosa (FC) de les fraccions insolubles de l'extracció. Malgrat les lleugeres diferències en el grau de purificació, els nous mètodes van donar lloc a FCs amb rendiments més elevats que el mètode alcalí (35-39 % enfront del 29 %), amb cristal·linitat (60-69 %), comportament tèrmic i relació d'aspecte (20-60) similars. Es van incorporar fibres USHT a l'1, 3 i 5 % (p/p) en pel·lícules de midó de dacsa, i de midó de dacsa modificat per tractament tèrmic. La incorporació al 3 % va donar lloc a pel·lícules amb les millors propietats funcionals. Els extractes actius (al 4, 6 i 8 % en pes) a la matriu de midó, amb o sense CF (3 %), proporcionaren pel·lícules més extensibles i menys resistents, però amb més capacitat de barrera a l'oxigen. Les bosses monodosi de l'oli de gira-sol amb aquestes pel·lícules actives i reforçades van reduir eficaçment l'oxidació. Les pel·lícules actives de PLA amb diferents proporcions (2, 4 i 6 % p/p) de l'extracte USHT, presentaren color i propietats mecániques lleugerament pitjors, però amb major capacitat de barrera a l'oxigen. La cinètica d'alliberament dels antioxidants incorporats, en simulants alimentaris de diferent polaritat (A: productes aquosos; i D1: sistemes d'oli en aigua), va mostrar que les pel·lícules amb un 6% d'extracte, tenien una capacitat antioxidant similar en simulants amb diferent polaritat. Es van obtenir bicapes biodegradables laminant PLA, amb i sense extracte USHT (6 %), i midó termoplàstic, amb o sense FC USHT (3 %). Les bicapes van mostrar millor capacitat de barrera global que les monocapes. No obstant això, la migració de compostos entre capes va donar lloc a pel·lícules menys rígides i resistents respecte a l'esperat de la contribució de la pel·lícula de PLA. Les bicapes actives i reforçades van allargar la vida útil de carn de porc refrigerada. Les pel·lícules de PLA amb un 6 % (p/p) dels diferents extractes (USHT, SWE-160 i SWE-180) van presentar menor resistència mecànica i capacitat de barrera al vapor d'aigua, però una major capacitat de barrera a l'oxigen i a la llum UV. A més, aquestes pel·lícules, especialment amb l'extracte SWE-180, van allargar la vida útil de la carn de porc refrigerada. Les FCs obtingudes amb els diferents mètodes de purificació també es van utilitzar per produir aerogels de cel·lulosa. Les diferències composicionals van afectar la microestructura dels aerogels. La capacitat d' absorció i de retenció d'aigua dels aerogels va estar dins dels rangs descrits per a aquest tipus de materials. Per tant, va ser possible obtenir fraccions valoritzades de la palla d' arròs, extractes actius i fibres cel·lulòsiques, útils en el desenvolupament de materials biodegradables actius a base de midó i PLA. Són necessaris més estudis per validar la seguretat alimentària dels materials, així com per al desenvolupament d' altres aplicacions en el camp de la indústria alimentària o farmacèutica., [EN] This Doctoral thesis focused on obtaining cellulosic fractions and bioactive extracts from rice straw (RS) by applying different extraction and purification techniques, using water as a green solvent. These fractions were incorporated into starch and poly (lactic acid) (PLA)-based films, as well as into starch-PLA bilayers, to obtain active packaging materials useful for extending the shelf life of different food matrices. The extracts obtained by applying a combined ultrasound-reflux heating method (USHT) and subcritical water extraction (SWE) (at 160 °C (SWE-160) and 180 °C (SWE-180)) exhibited high phenolic content (37, 51, 83 mg GAE.g-1 dry extract, respectively) and antioxidant activity (6.3, 2.0, and 1.2 mg dry extract.mg-1 DPPH, respectively). The SWE extracts showed antibacterial activity against L. innocua and E. coli. Cellulose fibres (CF) were isolated from the extraction insoluble fractions and compared with those obtained from the traditional alkaline method. Despite slight differences in the degree of purification, the new methods gave rise to CFs with higher yields than the alkaline method (35-39% vs. 29%), with similar crystallinity (60-69%), thermal behaviour, and aspect ratios. USHT fibres were incorporated into corn starch (1, 3, and 5% wt.), and corn starch-modified by heat treatment, obtained by thermoprocessing. The incorporation of CF at 3% gave rise to films with the best functional properties. When active extracts were incorporated at different ratios (4, 6, and 8% wt.) into the starch matrix, with or without CF (3%), the films were more stretchable and less resistant, but with higher oxygen barrier capacity. Likewise, mono-dose bags of these active and reinforced films effectively reduced the oxidation of packed sunflower oil. Active, plasticised PLA films were produced, incorporating USHT extract (2, 4, and 6% wt.) by thermoprocessing, which exhibited colour and slightly worsened tensile behaviour, but with higher oxygen barrier capacity. The release kinetics of the incorporated antioxidant compounds in food simulants of different polarity (A: aqueous products; and D1: oil-in-water systems) showed that films containing 6% of extract delivered similar antioxidant capacity regardless of the food simulant polarity. Biodegradable bilayers were obtained by laminating plasticised PLA, with and without USHT extract (6%), and thermoplastic starch, with or without USHT CFs (3%). The bilayers exhibited improved overall barrier capacity with respect to the monolayers. However, the interlayer compound migration led to less stiff and resistant films with respect to that expected from the PLA film contribution. The active and reinforced bilayers were able to extend the shelf life of the packed pork meat during cold storage. PLA films with 6% wt. of the different extracts (USHT, SWE-160, and SWE-180) were produced, which exhibited lower mechanical resistance and water vapour barrier capacity, but improved oxygen barrier capacity and intense UV light-blocking effect. Furthermore, the active PLA films, especially with SWE-180 extract, extended the shelf life of cold storage pork meat. The CFs obtained with the different purification methods were also used to produce cellulose aerogels. The differences in the chemical composition of the CFs affected the aerogels' microstructure. The water absorption and retention capacity of the aerogels were within the previously reported ranges for this type of material. Thus, it was possible to obtain valorised fractions of rice straw, active extracts and cellulosic fibres, useful in developing active biodegradable materials based on starch and PLA. Further studies are needed to validate the food safety of the materials, as well as for developing other applications in the food or pharmaceutical industry., The authors thank the Agencia Estatal de Investigación (Spain) for the financial support through projects PID2019-105207RB-I00/AEI/10.13039/501100011033 and Generalitat Valenciana [grant number GrisoliaP/2019/115].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Atomization of Microfibrillated Cellulose and Its Incorporation into Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Reactive Extrusion

  • Vieira-De Freitas, Pedro Augusto
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Barrasa, Hector
  • Vargas, Fátima
  • Rivera, Daniel
[EN] The present study focuses on the preparation and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films that were reinforced with cellulose microstructures to obtain new green composite materials for sustainable food packaging applications. The atomization of suspensions of microfibrillated cellulose (MFC) successfully allowed the formation of ultrathin cellulose structures of nearly 3 µm that were, thereafter, melt-mixed at 2.5, 5, and 10 wt % with PHBV and subsequently processed into films by thermo-compression. The most optimal results were attained for the intermediate MFC content of 5 wt %, however, the cellulose microstructures showed a low interfacial adhesion with the biopolyester matrix. Thus, two reactive compatibilizers were explored in order to improve the properties of the green composites, namely the multi-functional epoxy-based styrene-acrylic oligomer (ESAO) and the combination of triglycidyl isocyanurate (TGIC) with dicumyl peroxide (DCP). The chemical, optical, morphological, thermal, mechanical, and barrier properties against water and aroma vapors and oxygen were analyzed in order to determine the potential application of these green composite films in food packaging. The results showed that the incorporation of MFC yielded contact transparent films, whereas the reactive extrusion with TGIC and DCP led to green composites with enhanced thermal stability, mechanical strength and ductility, and barrier performance to aroma vapor and oxygen. In particular, this compatibilized green composite film was thermally stable up to ~280 °C, whereas it showed an elastic modulus (E) of above 3 GPa and a deformation at break (¿b) of 1.4%. Moreover, compared with neat PHBV, its barrier performance to limonene vapor and oxygen was nearly improved by nine and two times, respectively., This research was funded by Spanish Ministry of Science and Innovation (MICI), grant numbers PID2019-105207RB-I00 and RTC2019-007268-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biodegradable materials based on poly(vinyl alcohol) (PVA) and poly (lactic acid) (PLA) with antioxidant and antimicrobial activity for food packaging applications

  • Andrade Chapal, Johana Carolina
[ES] El uso masivo de plásticos y su impacto medioambiental, así como la necesidad de mejorar la conservación de los alimentos, hace necesario el desarrollo de alternativas biodegradables para el envasado activo de alimentos. La presente Tesis Doctoral, se ha centrado en el desarrollo de películas activas, basados en polímeros biodegradables con propiedades complementarias, con el fin de obtener materiales con propiedades mecánicas y de barrera adecuadas para cumplir con los requisitos del envasado alimentario. Para ello, se consideraron el poli (vinil alcohol) (PVA) y el poli (ácido láctico) PLA. Asimismo, el carvacrol y los ácidos ferúlico y cinámico fueron elegidos como compuestos activos naturales. Se estudió la encapsulación del carvacrol en liposomas de diferentes tipos de lecitina para mejorar su retención durante la etapa de formación del film. La lecitina de soja enriquecida en fosfatidilcolina fue la más eficaz para mantener la estabilidad de la emulsión de carvacrol, resultando en films con mayor retención. La incorporación de carvacrol (encapsulado o no), modificó ligeramente la microestructura y las propiedades físicas de los films, así como la cristalinidad y el comportamiento térmico del polímero. El PVA totalmente hidrolizado proporcionó films con un mejor desempeño mecánico y capacidad de barrera al oxígeno, pero con menor retención de carvacrol. Por el contrario, el PVA parcialmente hidrolizado dio lugar a films más homogéneos, con mayor contenido de carvacrol. Mientras que los grupos acetilos protegieron al polímero de la termodegradación, permitiendo la obtención de films mediante las técnicas habituales del procesado industrial. Por lo tanto, el PVA parcialmente hidrolizado tiene un gran potencial para la producción de films activos, con más posibilidades de procesamiento que el PVA totalmente hidrolizado. Se incorporaron también ácido cinámico y ferúlico, con menor impacto sensorial que el del carvacrol, al PVA parcial y totalmente hidrolizado, mediante casting de las soluciones acuosas con glicerol para mejorar la solubilidad de los ácidos. Los films de PVA plastificados con glicerol mostraron una menor capacidad de barrera que los no plastificados. La incorporación del ácido ferúlico promovió mayores cambios en las propiedades de los films que el ácido cinámico, debido a un efecto de reticulación, que promovió la cristalinidad, la rigidez y la capacidad de barrera del material. También se obtuvieron películas plastificadas a base de PVA parcialmente hidrolizado con ácidos fenólicos, mediante mezclado en fundido y moldeo por compresión. Los films termoprocesados fueron menos extensibles y resistentes a la rotura y más permeables al oxígeno y al vapor de agua. Estudios in vitro demostraron que los films con ácidos fenólicos obtenidos por casting o termoprocesado presentaron actividad antioxidante y antimicrobiana, especialmente con ácido ferúlico. Con el objetivo de cumplir los requisitos de envasado de alimentos, se obtuvieron films tricapa por termocompresión, compuestos por una capa central de PVA, cargada con compuestos activos (carvacrol o ácido ferúlico), y dos capas externas de PLA. La termocompresión fue eficaz para la adhesión interlaminar. Las multicapas mostraron un rendimiento mecánico próximo al de los films de PLA y una elevada capacidad de barrera al oxígeno y al vapor de agua. Todos los laminados con compuestos activos incorporados a la capa de PVA fueron eficaces para controlar el crecimiento microbiano en filetes de carne de vacuno envasada. Por tanto, el laminado de films de PVA y PLA parcialmente hidrolizado representa una estrategia adecuada para obtener materiales de envasado con propiedades funcionales más próximas a las de algunos plásticos convencionales utilizados en el envasado alimentario. Asimismo, estos materiales con carvacrol o ácido ferúlico incorporados podrían utilizarse para el envasado de alimentos altamente susceptibles a procesos oxidativos o de degradación microbiológica para alargar su vida útil., [CA] L'ús massiu de plàstics i el seu impacte mediambiental, així com la necessitat de millorar la conservació dels aliments, fa necessari el desenvolupament d'alternatives biodegradables per a l'envasament actiu d'aliments. La present Tesi Doctoral, s'ha centrat en el desenvolupament de pel·lícules actives, basats en polímers biodegradables amb propietats complementàries, amb la finalitat d'obtindre materials amb propietats mecàniques i de barrera adequades per a complir amb els requisits de l'envasament alimentari. Per a això, es van considerar el poli (vinil alcohol) (PVA) i el poli (àcid làctic) PLA. Així mateix, es van triar el carvacrol i els àcids ferúlic i cinàmic, com a compostos actius. Es va estudiar l'encapsulació del carvacrol en liposomes de diferents tipus de lecitina per a millorar la seua retenció durant l'etapa de formació del film. La lecitina de soja enriquida en fosfatidilcolina va ser la més eficaç per a mantindre l'estabilitat de l'emulsió de carvacrol, resultant en films amb major retenció. La incorporació de carvacrol (encapsulat o no), va modificar lleugerament la microestructura i les propietats físiques dels films, així com la cristalinitat i el comportament tèrmic del polímer. El PVA totalment hidrolitzat va proporcionar films amb un millor exercisc mecànic i capacitat de barrera a l'oxigen, però amb menor retenció de carvacrol. Per contra, el PVA parcialment hidrolitzat va donar lloc a films més homogenis, amb major contingut de carvacrol. Mentre que els grups acetils van protegir el polímer de la termodegradació, permetent l'obtenció de films mitjançant les tècniques habituals del processament industrial. Per tant, el PVA parcialment hidrolitzat té un gran potencial per a la producció de films actius, amb una més àmplia gamma de possibilitats de processament que el PVA totalment hidrolitzat. Es van incorporar també àcid cinàmic i ferúlic, amb menor impacte sensorial que el del carvacrol, al PVA parcial i totalment hidrolitzat, mitjançant càsting de les solucions aquoses amb glicerol per a millorar la solubilitat dels àcids. Els films de PVA plastificats amb glicerol van mostrar una menor capacitat de barrera que els no plastificats. La incorporació de l'àcid ferúlic va promoure majors canvis en les propietats dels films que l'àcid cinàmic, a causa d'un efecte de reticulació, que va promoure la cristalinitad, la rigidesa i la capacitat de barrera del material. També es van obtindre pel·lícules plastificades a base de PVA parcialment hidrolitzat amb àcids fenòlics, mitjançant barrejat en fos i emotlament per compressió. Els films termoprocessats van ser menys extensibles i resistents al trencament i més permeables a l'oxigen i al vapor d'aigua. Estudis in vitro van demostrar que els films amb àcids fenòlics obtinguts per càsting o termoprocessat van presentar activitat antioxidant i antimicrobiana, especialment amb àcid ferúlic. Amb l'objectiu de complir els requisits d'envasament d'aliments, es van obtindre films tricapa per termocompressió, compostos per una capa central de *PVA, carregada amb compostos actius (carvacrol o àcid ferúlic), i dues capes externes de PLA. La termocompressió va ser eficaç per a l'adhesió interlaminar. Les multicapes van mostrar un rendiment mecànic pròxim al dels films de PLA i una elevada capacitat de barrera a l'oxigen i al vapor d'aigua. Tots els laminatges amb compostos actius incorporats a la capa de PVA van ser eficaces per a controlar el creixement microbià en filets de carn de boví envasada. Per tant, el laminatge de films de PVA i PLA parcialment hidrolitzat representa una estratègia adequada per a obtindre materials d'envasament amb propietats funcionals més pròximes a les d'alguns plàstics sintètics utilitzats en l'envasament alimentari. Així mateix, aquests materials amb carvacrol o àcid ferúlic incorporats podrien utilitzar-se per a l'envasament d'aliments altament susceptibles a processos oxidatius o de degradació microbiològica per a allargar la seua vida útil., [EN] The massive use of synthetic plastics and their environmental impact, as well as the need of improving food preservation, makes necessary the development of biodegradable alternatives for food active packaging. The use of active compounds from natural origin to obtain this kind of materials is a new trend based of the consumer demand for safer and healthier products. The present Doctoral Thesis, has been focused on the development of active packaging films, based on biodegradable polymers with complementary properties, in order to obtain materials with adequate mechanical and barrier properties to meet food packaging requirements. To this end, poly (vinyl alcohol) (PVA) and poly (lactic acid) (PLA) were considered. Likewise, carvacrol and ferulic and cinnamic acid, were chosen as active natural compounds. The liposomal encapsulation of carvacrol, using different kinds of lecithin was evaluated in order to improve the carvacrol retention in the polymer matrix during the film formation step. Soy lecithin enriched in phosphatidylcholine was the most effective at maintaining the stability of the carvacrol emulsion, leading to its highest retention in the PVA films. Incorporation of carvacrol (lecithin encapsulated or not) slightly modified the film microstructure and physical properties and polymer crystallinity and thermal behaviour. The fully hydrolysed PVA provided films with a better mechanical performance and oxygen barrier capacity, but with less carvacrol retention. In contrast, partially hydrolysed PVA gave rise to more homogenous films with a higher carvacrol content. Acetyl groups protect the polymer for thermodegradation, allowing the film production using the common industrial thermoplastic processing techniques. Therefore, partially hydrolysed PVA has a great potential for the production of active films, with a wider range of processing possibilities than fully hydrolysed PVA. Cinnamic and ferulic acids, with lower potential sensory impact than of carvacrol, were also incorporated into partially and fully hydrolysed PVA by casting of aqueous solutions containing glycerol to improve the acid solubility. Glycerol plasticized PVA films exhibited poorer barrier capacity than those non-plasticized. The incorporation of ferulic acid promoted greater changes in the film properties than cinnamic acid, due to a crosslinking effect, which promoted crystallinity, stiffness and barrier capacity of the material. Glycerol plasticized films based on partially hydrolysed PVA with phenolic acids were also obtained by melt blending and compression moulding. Termoprocessed films were less stretchable and resistant to break and more permeable to oxygen and water vapor. In vitro studies demonstrated that cast and termoprocessed films containing phenolic acids exhibited antioxidant and antimicrobial activity, especially with ferulic acid. Three-layer films composed of a central layer of PVA loaded with active compounds (carvacrol lecithin encapsulated or not, or ferulic acid) and two external PLA layers were obtained by thermo-compression, aimed to meet food packaging requirements. Thermocompression was effective for the interlaminar adhesion. Multilayers exhibited mechanical performance close to the PLA sheets and high oxygen and water vapour barrier capacity. All laminates with active compounds incorporated into the PVA sheet were effective at controlling microbial growth in packaged beef meet. Therefore, lamination of partially hydrolysed PVA and PLA films represents a successful strategy to obtain packaging materials with functional properties closer to those of some conventional plastics commonly used in food packaging. Likewise, these materials incorporating carvacrol or ferulic acid could be used for packaging of foods highly susceptible to oxidative or microbiological degradative process to extend their shelf life., The authors acknowledge the financial support of the Agencia Estatal de Investigacion, Ministerio de Economía y Competitividad (MINECO) of Spain through the projects AGL2016-76699-R and PID2019-105207RB-100. Author Johana Andrade thanks the Departamento de Nariño-Colombia y la Fundación CEIBA for the doctoral grant. The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liposomal Encapsulation of Carvacrol to Obtain Active Poly (Vinyl Alcohol) Films

  • Andrade, Johana
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Lecithins of different origins and compositions were used for the liposomal encapsulation of carvacrol within the framework of the development of active films for food packaging. Liposomes were incorporated into aqueous polymeric solutions from fully (F) and partially (P) hydrolysed Poly (vinyl alcohol) (PVA) to obtain the films by casting. The particle size distribution and zeta-potential of the liposomal suspensions, as well as their stability over time, were evaluated. Liposomal stability during film formation was analysed through the carvacrol retention in the dried film and the film microstructure. Subtle variations in the size distributions of liposomes from different lecithins were observed. However, the absolute values of the zeta-potential were higher (-52, -57 mV) for soy lecithin (SL) liposomes, followed by those of soy lecithin enriched with phosphatidylcholine (SL-PC) (-43, -50 mV) and sunflower lecithin (SFL) (-33, -38 mV). No significant changes in the liposomal properties were observed during the study period. Lyotropic mesomorphism of lipid associations and carvacrol leakage occurred to differing extents during the film drying step, depending on the membrane lipid composition and surface charge. Liposomes obtained with SL-PC were the most effective at maintaining the stability of carvacrol emulsion during film formation, which led to the greatest carvacrol retention in the films, whereas SFL gave rise to the least stable system and the highest carvacrol losses. P-PVA was less sensitive to the emulsion destabilisation due to its greater bonding capacity with carvacrol. Therefore, P-PVA with carvacrol-loaded SL-PC liposomes has great potential to produce active films for food packaging applications., The authors acknowledge the financial support of the Agencia Estatal de Investigacion, Ministerios de Ciencia e Innovacion y de Universidades of Spain (projects AGL2016-76699-R and PID2019-105207RB-100). Author Johana Andrade thanks the Departamento de Narino-Colombia y la Fundacion CEIBA for the doctoral grant. The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermoprocessed starch-polyester bilayer films as affected by the addition of gellar or xantham gum

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Monolayer films based on cassava starch (CS) or maize starch (MS), with and without 10% of gellan or xanthan gum, and PLA-PHBV (75:25) blend films, were obtained by melt-blending and compression moulding, using glycerol (for starch blends) and PEG 1000 (for polyester blends) as plasticisers. Bilayer films were obtained by thermo-compression of the different starch based sheets with the polyester sheet. Both mono and bilayers were characterised as to their mechanical and barrier properties, equilibrium moisture, water solubility and microstructure. The incorporation of gellan gum and xanthan gum improved the mechanical properties of starch-based films, especially in the case of MS, although the highest EM and TS values were obtained for CS-gum films. The incorporation of either gellan or xanthan gum decreased the water vapour and oxygen permeability of starch-based films; the CS films with gums being the least permeable to oxygen. The lowest changes in mechanical properties throughout storage were obtained in cassava starch-based films, especially those containing xanthan gum. Starch based-polyester bilayers presented a high oxygen and water vapour barrier capacity, as compared to their individual monolayers. Bilayer films with cassava starch including the gums showed the lowest OP and WVP values and the highest elastic modulus and tensile strength, with extensibility values in the range of the corresponding monolayers and slight changes in their physical properties throughout time. The bilayer formed with cassava starch with gellan gum and a PLA-PHBV appeared as the best option for food packaging purposes taking into account its functional properties and the good layer adhesion of the bilayer., The authors would like to thank the Ministerio de Ciencia e Innovacion of Spain, for funding this study through the Project AGL2016-76699-R and PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Poly (Lactic Acid) Films with Rice Straw Aqueous Extracts for Meat Preservation Purposes

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Aqueous extracts from rice straw (RS), using ultrasound-assisted reflux heating extraction (USHT) and subcritical water extraction (SWE), under two process conditions (160 degrees C, 7 bars; and 180 degrees C, 11 bars), were obtained and characterised as to their phenolic content and antioxidant and antimicrobial capacities. These extracts were incorporated (6% wt.) into poly (lactic acid) (PLA) films by melt blending and compression moulding that were characterised as to their structural and functional properties and their capacity to preserve fresh pork meat, as vacuum thermo-sealed bags, throughout 16 days of cold storage. The extracts slightly reduced the extensibility, resistance to break, and water barrier capacity of the PLA films but enhanced their oxygen barrier capacity and the UV light-blocking effect. The films with RS extracts were effective at preserving meat quality parameters, inhibiting microbial growth, meat oxidation, discolouration, and weight loss. The SWE extract obtained at 180 degrees C was the most effective at obtaining active films for meat preservation, exhibiting the greatest antioxidant and antibacterial activity. Therefore, the green SWE technique is useful for obtaining active extracts from RS, allowing for its valorisation in the development of biodegradable active materials useful to preserve food quality., The authors thank the Agencia Estatal de Investigacion (Spain) for the financial support through project PID2019-105207RB-I00/AEI/10. 13039/501100011033 and Generalitat Valenciana through the project CIPROM/2021/071 and funding (grant number GrisoliaP/2019/115).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of active phenolic acids on properties of PLA-PHBV blend films

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Phenolic acids (ferulic, p-coumaric, and protocatechuic) have been incorporated into polylactic (PLA): Poly(3hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) (75:25) blend films that were obtained by melt-blending and compression moulding, using PEG1000 as a plasticizer. Film microstructure, thermal behavior, functional properties, and release kinetics of phenolic acids in different food simulants were analyzed, and the film antimicrobial activity against Listeria innocua. Phenolic acids led to an increase in the glass transition temperature of PLA while PHBV supercooling occurred in the films containing protocatechuic acid, which affected their thermal degradation behavior. Polymer matrices with phenolic acids were stiffer and more resistant to break than the polyester blend, but with similar extensibility, while oxygen and water vapor barrier capacity were also improved, especially in films containing protocatechuic acid. The release rate and ratio of phenolic acids increased when the polarity of the food simulant decreased, although very slow delivery was observed in all cases. The limited release of active compounds in aqueous media provoked that films did not significantly inhibit the growth of Listeria innocua in inoculated culture medium., Acknowledgements The authors would like to thank the Ministerio de Ciencia e Innovación of Spain, for funding this study through the Project AGL2016-76699-R and PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antioxidant poly (lactic acid) films with rice straw extract for food packaging applications

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Bas Gil, Nuria Julia
[EN] Antioxidant PLA films incorporating 2%, 4% and 6% of phenol-rich extract from rice straw (RS) were obtained by melt blending and compression-moulding. Aqueous RS extract was obtained by a combined ultrasound-reflux heating method and characterised as to its total phenolic content (TPC) and antioxidant capacity. The effect of the extract ratio on the functional properties of the films was analysed, as well as the release kinetics of antioxidants in food simulants (ethanol 10% and 50%). Extract incorporation slightly reduced the strength of the polymer matrix, stretchability, resistance to break, barrier capacity and thermostability, while films became brownish and gained antioxidant capacity. Phenolic compounds from the extract were effectively released into food simulants, depending on the extract concentration, the food simulant and contact time. The radical scav-enging capacity of the films reached asymptotic values from about 150 h contact time, and films with 6% of the extract exhibited similar values for both simulants. So, PLA films with approximately 6% of extract could be used as biodegradable active packaging material with antioxidant capacity in both aqueous foods (simulant A) and more fatty products (simulant D1). Further studies are required to verify the antioxidant efficiency of the films in real foods., This work was supported by the Agencia Estatal de Investi gacion through project PID2019-105207RB-I00/AEI/10.13039/501100011033 and by Generalitat Valenciana [grant number GrisoliaP/2019/115] . Funding for open access charge: CRUE-Universitat Polite`cnica de Vale`ncia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using rice straw fractions to develop reinforced, active PLA-starch bilayers for meat preservation

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayers from thermoplastic corn starch (TPS) and PLA were obtained, incorporating or not rice straw (RS) valorised fractions: active extract (es) into PLA and cellulose fibres (cf) into TPS films. The films were obtained by thermoprocessing while the bilayers were obtained by thermocompression of the different monolayers (TPS-PLA, TPScf-PLA, TPS-PLAes and TPScf-PLAes). TPS conferred oxygen barrier capacity to the laminates, which was improved by the cf incorporation. The extract slightly reduced the PLA resistance but improved their oxygen barrier capacity. The tensile and barrier properties of the bilayers revealed changes in the performance of each layer associated with the interlayer compound migration. The TPScf-PLAes bags exhibited noticeable antioxidant capacity when used in meat packaging and reduced microbial counts throughout cold storage. Therefore, these bilayers have considerable potential to extend the shelf-life of meat samples, preserving their quality and safety for longer, while using RS fractions permits its valorisation., Funding This work was supported by Generalitat Valenciana [grant number GrisoliaP/2019/115] and project PID2019-105207RB-I00/AEI/10.13039/501100011033. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lamination of starch/polyesters by thermocompression for food packaging purposes

  • La Fuente-Arias, Carla Ivonne|||0000-0003-3435-8679
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Multilayer films were obtained by thermocompression to produce laminates that better-fit food packaging requirements. Films of glycerol-plasticised corn starch, both non-modified and modified by dry heating (DH) and PHBV films containing 0, 10 or 20% PEG 1000 were combined in bilayer associations with amorphous PLA sheets. Starch-PLA-PHBV tri-layers were also obtained and characterised as to their functional properties. The surface tension of the different polymer films was determined to estimate each polymer pair's adhesion work, which was not well correlated to the experimental seal strength. DH starch modification markedly reduced (95%) the water vapour permeability (WVP) of starch films while PEG weakened the strength of PHBV films and greatly increased their oxygen permeability (OP). Lamination with PLA reduced (85%) the WVP of non-modified starch while increased the tensile strength (183 and 196%) and decreased the elongation at break (25 and 22%) of the non-modified and DH starch films. Nevertheless, PLA-PHBV laminates and tri-layers did not exhibit significantly improved properties as compared to the non-plasticised PHBV monolayers. The interlayer migration of plasticisers, including the water present in starch films, altered the expected tensile and barrier properties of multilayers. Tri-layer films were obtained to produce laminates that better-fit food packaging requirements. Overall improvement of barrier and tensile properties of PLA-starch laminates with respect to the individual films regardless of the type of starch., The authors acknowledge the Sao Paulo Research Foundation (FAPESP) for the Research Internships Abroad (BEPE) fellowship (2020/10498-0) of CIA La Fuente and the Agencia Estatal de Investigación (Spain), grant number PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable Antimicrobial Films for Food Packaging: Effect of Antimicrobials on Degradation

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The environmental problem generated by the massive consumption of plastics makes necessary the developing of biodegradable antimicrobial materials that can extend food shelf-life without having a negative impact on the environment. The current situation regarding the availability of biodegradable food packaging materials has been analysed, as well as different studies where antimicrobial compounds have been incorporated into the polymer matrix to control the growth of pathogenic or spoilage bacteria. Thus, the antimicrobial activity of active films based on different biodegradable polymers and antimicrobial compounds has been discussed. Likewise, relevant information on biodegradation studies carried out with different biopolymers in different environments (compost, soil, aquatic), and the effect of some antimicrobials on this behavior, are reviewed. In most of the studies, no relevant effect of the incorporated antimicrobials on the degradation of the polymer were observed, but some antimicrobials can delay the process. The changes in biodegradation pattern due to the presence of the antimicrobial are attributed to its influence on the microorganism population responsible for the process. More studies are required to know the specific influence of the antimicrobial compounds on the biodegradation behavior of polymers in different environments. No studies have been carried out or marine media to this end., This research was funded by Ministerio de Ciencia e Innovacion of Spain through the Project AGL2016-76699-R, PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyhydroxybutyrate-co-hydroxyvalerate (PHBV) with Phenolic Acids for Active Food Packaging

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] PHBV films incorporating 3, 6 and 9% ferulic acid (FA) or p-coumaric acid (PCA) were obtained by melt blending and compression moulding. The films¿ microstructures and thermal behaviours were analysed as well as their mechanical, optical and barrier properties. The overall and specific migration of the materials in different food simulants was also characterised. FA was homogeneously mixed with the polymer, whereas PCA was mainly dispersed as fine particles in the PHBV matrices due to its higher melting point. These structural features promoted differences in the physical properties of the films depending on the compound concentration. As the concentration of both compounds rose, the barrier capacity of the films to oxygen, and to a lesser extent water vapour, was enhanced. While FA promoted the extensibility of the films, 9% PCA enhanced their brittleness. Both compounds affected the crystallisation pattern of the polymer, promoting smaller crystalline formations and a slight decrease in crystallinity. Although the overall migration of every film formulation was lower than the overall migration limit (OML), the release of active compounds was dependent on the food simulant; almost total release was noted in ethanol containing simulants but was more limited in aqueous systems. Therefore, these films could be used as food contact materials, contributing to extending the food¿s shelf life., Projects: PID2019-105207RB-I00 funded by MCIN/AEI/10.13039/501100011033 and CIPROM/2021/071 funded by Generalitat Valenciana; Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antioxidant starch composite films containing rice straw extract and cellulose fibres

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Antioxidant aqueous rice straw (RS) extract was obtained by a combined ultrasound-reflux heating process and cellulose fibres (CF) were purified by bleaching the extraction residue. Both fractions were incorporated into corn starch to obtain films by melt blending and compression moulding. CF (at 3 % wt.) greatly increased the elastic modulus (by 200 %) and tensile strength at break (by 100 %) while reducing film stretchability. Films with CF exhibited the greatest barrier capacity to water vapour and oxygen. The incorporation of RS extract (at 4, 6 and 8 % wt.) plasticised the film¿s amorphous phase, but also reinforced the matrix to a certain extent. The active films showed a high degree of UV absorption and DPPH radical scavenging capacity. Mono-dose sunflower oil bags were obtained with films with CF and RS extracts that, to a great extent, prevent oil oxidation in an accelerated oxidative test under UV radiation throughout 50 days., This work is supported by Generalitat Valenciana [grant number GrisoliaP/2019/115] and project PID2019-105207RB-I00/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inhibitory Effects and Mode of Action of Pure Eugenol Versus Clove Essential Oil on Key Phytopathogenic Fungi

  • Sempere Ferre, Francisca
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
[EN] The use of natural products as alternatives to synthetic fungicides has gained increasing importance in crop protection. Among these, clove (Syzygium aromaticum) and its active compound, eugenol, are well known for their antifungal properties. However, it remains unclear whether the antifungal activity of clove is primarily driven by its major constituent, eugenol, or whether the whole essential oil exhibits greater or synergistic efficacy. Addressing this question is crucial for optimizing their application as biofungicidal agents; The chemical composition of clove essential oil was characterized using gas chromatography-flame ionization detection (GC-FID) and gas chromatography-mass spectrometry(GC-MS). The antifungal activity of the essential oil and pure eugenol (300 & micro;g/mL) was evaluated in vitro against Botryotinia fuckeliana, Rhizoctonia solani, and Verticillium dahliae on potato dextrose agar (PDA). Mycelial growth inhibition was quantified, and data were analyzed using two-way analysis of variance (ANOVA) followed by Tukey's honestly significant difference (HSD) test (alpha = 0.05); Eugenol exhibited higher antifungal activity than the essential oil across all tested species. V. dahliae was completely inhibited (100%) by eugenol, while the essential oil showed lower efficacy. Despite the high eugenol content (87.3%) in the oil, its reduced activity suggests that minor constituents may modulate overall antifungal performance. These findings demonstrate that eugenol is more effective than clove essential oil as an antifungal agent. This highlights that the biological activity of clove is largely driven by its major active component, providing key insights for the development of more efficient biofungicidal strategies., The authors declare financial support was received for the research, authorship, and/or publication of this article. This work was supported by the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion de Espana) [grant numbers PID2019-105207RB-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using tannins as active compounds to develop antioxidant and antimicrobial chitosan and cellulose based films

  • Cano, A.
  • Contreras Monzón, Carolina Ivonne|||0000-0003-3377-4531
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Three tannin extracts from different sources (white peel grape (W), red peel grape (R) and oak bark (O)) have been used to obtain active films based on different polysaccharides: chitosan (CH), methylcellulose (MC) and hydroxypropylmethylcellulose (HPMC). Tannin-rich films were obtained by casting as monolayers (by blending all the components) and as bilayers (one polysaccharide layer plus one tannin layer applied as a coating). Microstructural and physicochemical properties (water solubility, water vapor permeability, mechanical and optical properties), as well as the antioxidant and antimicrobial activities of the films, were analysed. Tannins, regardless of their origin, acted as crosslinking agents when incorporated into CH or MC films due to the establishment of specific associations, mainly hydrogen bonds and hydrophobic interactions. Thus, these tanninrich films turned less water soluble, mechanically stiffer and less stretchable. In contrast, tannins provoke precipitation in the HPMC film-forming solutions and the application of tannins onto the HPMC film surface gave rise to a weakened network due to the local precipitation of HPMC-tannin complexes. The greatest antioxidant capacity was found in both mono and bilayer tannin-rich MC based films in different food simulants, in line with a tannin release from the polymer matrix. The MC bilayer films also exhibited a bacteriostatic activity against both E.Coli and L. innocua. So, MC films with tannins could represent a good alternative as active coatings or packaging material so as to prevent the occurrence of oxidative reactions in sensitive food products or to control bacterial growth., The authors acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad through the project PID2019-105207RB-I
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Rice Straw into Cellulose Microfibers for the Reinforcement of Thermoplastic Corn Starch Films

  • Vieira-De Freitas, Pedro Augusto
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
  • La Fuente Arias, Carla I.
[EN] In the present study, agro-food waste derived rice straw (RS) was valorized into cellulose microfi-bers (CMFs) using a green process of combined ultrasound and heating treatments and were, thereafter, used to improve the physical properties of thermoplastic starch films (TPS). Mechanical defibrillation of the fibers gave rise to CMFs with cumulative frequencies of length and diameters below 200 and 5¿15 µm, respectively. The resultant CMFs were successfully incorporated by melt mixing into TPS and also starch subjected to dry heating (DH) modification to yield TPS modified by dry heating (TPSDH) by thermo-compression and characterized. It was observed that both DH modification and fiber incorporation at 3 and 5 wt% loadings interfered with the starch gelatini-zation, leading to non-gelatinized starch granules in the biopolymer matrix. Thermo-compressed films prepared with both types of starches that wereand reinforced with 3 wt% CMF were more rigid (percentages increases of ~215% for TPS and ~207% for the TPSDH), more resistant to break (~100% for TPS and ~60% for TPSDH), but also less extensible (~53% for TPS and ~78% for TPSDH). The incorporation of CMFs into the TPS matrix at both contents also promoted a de-crease in water vapor (~15%) and oxygen permeabilities (~30%). Finally, the TPS composite films showed low changes in terms of optical properties and equilibrium moisture, being less soluble in water than the TPSDH films., This research was funded by Spanish Ministry of Science and Innovation (MICI), grant number PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Use of ferulic and cinnamic acids to obtain active films based on starch and PLA for food packaging applications

  • Ordóñez Lagos, Ramón Alberto
[ES] Los residuos de envases alimentarios contribuyen en gran medida a la actual crisis medioambiental provocada por los plásticos. Por ello, la industria alimentaria necesita soluciones de envasado más sostenibles y respetuosas con el medio ambiente, utilizando materiales biodegradables y activos para alargar la vida útil de los alimentos. En este sentido, la presente tesis doctoral tiene como objetivo la obtención de películas activas a base de almidón y PLA mediante la incorporación de ácidos ferúlico o cinámico como compuestos activos, con el fin de desarrollar laminados multicapa que cumplan con los requisitos de envasado de alimentos, con capacidad antibacteriana para alargar la vida útil del producto. La incorporación de los ácidos ferúlico y cinámico a las matrices de almidón de yuca mediante el proceso de mezclado en fundido, al 1 y 2%, promovió la plastificación de la película, probablemente debido a la hidrólisis parcial del polímero durante el proceso de mezclado. Los análisis de la actividad antibacteriana de las películas frente a Escherichia coli y Listeria innocua, en medio de cultivo, revelaron que las películas con ácido cinámico eran más eficaces para inhibir el crecimiento bacteriano, y que Listeria innocua era más sensible a ambos ácidos que E. coli. Cuando los ácidos se incorporaron a las matrices de PLA al 1 y 2% mediante mezclado en fundido, las propiedades funcionales de las películas no se vieron muy afectadas. Sin embargo, los ensayos antimicrobianos in vitro con L. innocua y E. coli, no mostraron acción antibacteriana. Los estudios de liberación mostraron una liberación muy limitada de los ácidos desde la matriz de PLA debido al estado vítreo de la matriz polimérica y a su naturaleza hidrofóbica, que limitan el hinchamiento y la relajación del polímero en contacto con medios acuosos, como muchas matrices alimentarias. Por lo tanto, para promover la liberación del compuesto activo desde la matriz de PLA, se analizaron diferentes estrategias: 1) plastificar las películas termoprocesadas con PEG 1000, 2) aumentar la concentración de los compuestos en la película, 3) procesar las películas por casting y 4) anclar los compuestos activos a la superficie de la película. Sólo la incorporación superficial de ferúlico o cinámico en las películas de PLA dio lugar a una inhibición significativa del crecimiento bacteriano. La pulverización de las películas de PLA con soluciones etanólicas de ácido permitió la formación superficial de una capa sobre concentrada de compuestos activos en las películas, con formaciones cristalinas que dio lugar a una adecuada liberación de activos para inhibir el crecimiento bacteriano. Disoluciones de PLA-ácido, utilizando mezclas de acetato de etilo con DMSO o ácido acético glacial, fueron electrodepositadas en la superficie de las películas. Los sistemas con DMSO produjeron fibras con una elevada superficie específica que inhibieron significativamente el crecimiento bacteriano, mientras que los sistemas con ácido acético produjeron estructuras particuladas sin actividad antimicrobiana. Se consideró la incorporación superficial de los compuestos activos para obtener películas de tres capas PLA/almidón/PLA (PSP) con mejores propiedades funcionales y capacidad antimicrobiana. Las películas cargadas superficialmente, tanto por electrospinning como por pulverización, mostraron una eficaz inhibición del crecimiento de E. coli y L. innocua, siendo las películas recubiertas por electrospinning más eficaces que las pulverizadas. Por lo tanto, los laminados PSP, con incorporación superficial de ácidos ferúlico o cinámico, representan una buena alternativa para obtener materiales de envasado de alimentos activos, con capacidad para preservar la calidad de los alimentos y prolongar su vida útil. No obstante, son necesarios más estudios sobre aplicaciones específicas en alimentos reales para determinar la posible aplicación industrial y la viabilidad económica de estos materiales., [CA] Els residus d' envasos alimentaris contribueixen en gran mesura a l' actual crisi mediambiental provocada pels plàstics. Per això, la indústria alimentària necessita solucions d' envasament més sostenibles i respectuoses amb el medi ambient, utilitzant materials biodegradables i actius per allargar la vida útil dels aliments. En aquest sentit, aquesta tesi doctoral té com a objectiu l' obtenció de pel·lícules actives a base de midó i PLA mitjançant la incorporació d' àcids ferúlic o cinàmic com a compostos actius, per tal de desenvolupar laminats multicapa que compleixin amb els requisits d' envasament d' aliments, amb capacitat antibacteriana per allargar la vida útil del producte. La incorporació dels àcids ferúlic i cinàmic a les matrius de midó de iuca mitjançant el procés de mesclament en fos, a l'1 i 2% p/p, va promoure la plastificació de la pel·lícula, probablement a causa de la hidròlisi parcial del polímer durant el procés de barret. Les anàlisis de l'activitat antibacteriana de les pel·lícules enfront d'Escherichia coli i Listeria innocua, en medi de cultiu, van revelar que les pel·lícules amb àcid cinàmic eren més eficaces per inhibir el creixement bacterià, i que Listeria innocua era més sensible a tots dos àcids que E. coli. Quan els àcids van incorporar a les matrius de PLA a l'1 i al 2% mitjançant mesclament en fos, les propietats funcionals de les pel·lícules no es van veure gaire afectades. No obstant això, els assajos antimicrobians in vitro amb L. innocua i E. coli, no van mostrar acció antibacteriana. Els estudis d'alliberament van mostrar un alliberament molt limitat dels àcids ferúlic i cinàmic des de la matriu de PLA a causa de l'estat vitri de la matriu polimèrica i a la seva naturalesa hidrofòbica, que limiten l'hinxament i la relaxació del polímer en contacte amb mitjans aquosos, com moltes matrius alimentàries. Per tant, per promoure l' alliberament del compost actiu des de la matriu de PLA, es van analitzar diferents estratègies: 1) plastificar les pel·lícules termoprocessades amb PEG 1000, 2) augmentar la concentració dels compostos a la pel·lícula, 3) processar les pel·lícules per casting i 4) ancorar els compostos actius a la superfície de la pel·lícula. Només la incorporació superficial de ferúlic o cinàmic a les pel·lícules de PLA va donar lloc a una inhibició significativa del creixement bacterià. La polvorització de les pel·lícules de PLA amb solucions etanòliques d'àcid va permetre la formació superficial d'una capa sobreconcentrada de compostos actius a les pel·lícules, amb formacions cristal·lines, que va donar lloc a un adequat alliberament d'actius per inhibir el creixement bacterià. Dissolucions de PLA-àcid, utilitzant mescles d'acetat d'etil amb DMSO o àcid acètic glacial, van ser electrodepositades a la superfície de les pel·lícules. Els sistemes amb DMSO van produir fibres amb una elevada superfície específica que van inhibir significativament el creixement bacterià, mentre que els sistemes amb àcid acètic van produir estructures particulades sense activitat antimicrobiana. Es va considerar la incorporació superficial dels compostos actius per obtenir pel·lícules de tres capes PLA/midó/PLA (PSP) amb millors propietats funcionals i capacitat antimicrobiana. Les pel·lícules carregades superficialment, tant per electrospinning com per polvorització, van mostrar una eficaç inhibició del creixement d'E. coli i L. innocua, sent les pel·lícules recobertes per electrospinning més eficaços que les polvoritzades. Per tant, els laminats PSP, amb incorporació superficial d'àcids ferúlic o cinàmic, representen una bona alternativa per obtenir materials d'envasat d'aliments actius, amb capacitat per preservar la qualitat dels aliments i prolongar la seva vida útil. No obstant això, calen més estudis sobre aplicacions específiques en aliments reals per determinar la possible aplicació industrial i la viabilitat econòmica d' aquests materials., [EN] Food packaging waste is a major contributor to the current environmental crisis caused by conventional plastic. Therefore, the food industry needs more sustainable environmentally friendly packaging solutions, such as using biodegradable and active materials to extend the food shelf-life. In this sense, the present doctoral thesis aims to obtain active films based on starch and PLA by incorporating ferulic or cinnamic acids as active compounds, in order to develop multilayer assemblies useful to meet food packaging requirements, with antibacterial capacity to extend the product shelf life. The incorporation of ferulic and cinnamic acids into cassava starch matrices through melt-blending process, at 1 and 2% w/w, promoted the film plasticization, probably due to the partial hydrolysis of polymer during the melt-blending process. The analyses of the antibacterial activity of the films against E. coli and Listeria innocua strains, in culture medium, revealed that films with cinnamic acid were more effective at inhibiting the bacterial growth, and that L. innocua was more sensitive to both acids than E. coli. When the acids were incorporated into PLA matrices at 1 and 2% w/w by melt blending, the functional properties of the films were not greatly affected. However, the in vitro antimicrobial tests with L. innocua and E. coli, did not show antibacterial action. Release studies showed very limited release of the ferulic and cinnamic acids from the PLA matrix due to the glassy state of polymer matrix and its hydrophobic nature that limits the polymer swelling and relaxation in contact with aqueous media, such as many food matrices. Therefore, in order to promote the release of active compound from the PLA matrix, different strategies were analysed: 1) plasticizing the thermoprocessed films with PEG 1000, 2) increasing the concentration of the compounds in the film, 3) processing the films by casting and 4) anchoring the active compounds to the film surface. Only the surface incorporation of ferulic or cinnamic on PLA films gave rise to significant bacterial growth inhibition. Pulverization of PLA films with ferulic or cinnamic acid ethanol solutions allows the formation of an overconcentrated layer of active compounds on the films with crystalline formations that led to an adequate release of actives to inhibit the bacterial growth. PLA-acid solutions, using blends of ethyl acetate with dimethyl sulfoxide (DMSO) or glacial acetic acid, were electrospun on the film surface. DMSO systems produced fibre-structured mats with high specific surface that significantly inhibited bacterial growth, whereas acetic acid systems produce bead-based mats that not had antimicrobial activity. The surface incorporation of the active compounds was considered for obtaining three-layered films PLA/starch/PLA (PSP) with improved functional properties and antimicrobial capacity. Superficially loaded films by both electrospinning or pulverisation, showed effective growth inhibition of E. coli and L. innocua, electrospun films being more effective than pulverised, suggesting greater ability to release the active compounds. Therefore, PSP laminates, with surface incorporation of ferulic or cinnamic acids, represent a good alternative to obtain active food packaging materials with the capacity to preserve food quality and extend shelf life. Nonetheless, further studies on the material stability and specific applications in real foods are necessary to determine the possible industrial application and economic viability of these materials., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antimicrobial PLA-PVA multilayer films containing phenolic compounds

  • Andrade, Johana
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Multilayer materials with good interlayer-adhesion were obtained by thermocompression for laminating an internal poly (vinyl alcohol) (PVA) layer with two external poly (lactic acid) (PLA) layers. Carvacrol or ferulic acid were incorporated into the PVA sheet to obtain active materials. The multilayer films were characterised as to their microstructure, thermal behaviour, tensile and barrier properties. Furthermore, the antimicrobial capacity of the materials was analysed in packaged beef meat samples for 17 days at 5 degrees C. The laminates exhibited tensile properties close to those of the PLA films, but with enhanced stretchability. Compared to the monolayers, the barrier capacity of multilayers was much improved by combining polyester and PVA layers, which provide the laminate with water vapour and oxygen barrier capacity, respectively. Active multilayers were effective at controlling microbial growth in beef meat during cold storage. Therefore, the materials developed were functionally adequate for food packaging purposes and successfully promoted the meat preservation., This work was funded by the Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion of Spain [PID2019-105207RB-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Properties of PLA films with cinnamic acid: Effect of the processing method

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Polylactic acid (PLA) is a sustainable material for food packaging applications. The incorporation of cinnamic acid (CA) into PLA films was studied to obtain antimicrobial films, using two different techniques for film production, namely casting and thermal processing (TP). Whereas CA could be successfully incorporated at 5 and 10% w/w into TP films, only 3% w/w could be used in cast films without observing any crystallisation of CA. The acid reduced the glass transition temperature in TP films, while also improving their thermal resistance. Cast films retained a little proportion of the casting solvent which contributed to their plasticisation. The processing method greatly affected the mechanical properties of the films, with the cast films being significantly more plastic and stretchable. CA reduced the film¿s stiffness and resistance to break and improved their water vapour and oxygen barrier capacity. Antibacterial assays with Listeria innocua did not show significant growth inhibition for any film, but the observed inhibition could be related to the acid concentration. This suggested that only a small amount of acid near the film surface could be released. Further research to promote the superficial concentration of cinnamic acid into PLA films is required to obtain active materials., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through project PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biodegradable Multilayer Films for Active Food Packaging, Based on Starch and Polyesters with Phenolic Acids

  • Hernández García, Eva
[ES] Se han desarrollado mediante termoprocesado películas multicapa biodegradables activas para el envasado de alimentos, combinando películas de almidón mejoradas y de una mezcla de poliésteres (PLA-PHBV), con diferentes ácidos fenólicos (ferúlico, p-cumárico y protocatecuico). En las películas almidón de yuca o de maíz se incorporaron gomas de origen microbiano (xantana y gelano) (10%) para mejorar sus propiedades funcionales. Las gomas mejoraron las propiedades mecánicas y de barrera al vapor de agua y al oxígeno de los films de almidón. Estos films se combinaron con films mezcla de PLA:PHBV en bicapas almidón-poliésteres por termocompresión. Las bicapas presentaron una alta capacidad barrera al oxígeno y al vapor de agua comparado con sus respectivas monocapas. La capa de poliéster contribuyó al refuerzo mecánico de la bicapa, aportando alta capacidad de barrera al vapor de agua, mientras que la capa de almidón aportó alta capacidad de barrera al oxígeno a la bicapa. La bicapa con almidón de yuca y goma gelano presentó la mejor adhesión entre capas, con propiedades funcionales adecuadas para el envasado de alimentos. Los ácidos ferúlico, p-cumárico y protocatecuico, con propiedades antimicrobianas y antioxidantes, se incorporaron (2%) en los films mezcla de PLA:PHBV para obtener films activos. Los ácidos fenólicos modificaron positivamente las propiedades de la mezcla de poliésteres, incrementando su módulo de elasticidad y resistencia a la fractura y su capacidad de barrera al vapor de agua y al oxígeno, al tiempo que aumentaron levemente la Tg del material. El ácido protocatecuico provocó los mayores efectos, afectando a la cristalización del PHBV. La liberación de estos compuestos en diferentes simulantes alimentarios (con polaridad alta e intermedia) fue muy limitada en cuanto a velocidad y cantidad liberada, lo que disminuyó la capacidad de las películas para inhibir de forma significativa el crecimiento de Listeria innocua inoculada en medio de cultivo. Estos films, con y sin compuestos activos, se desintegraron en condiciones de compostaje, sin efecto significativo de los ácidos fenólicos. Los films sin activos y con ácido ferúlico se biodegradaron completamente después de 20 días de compostaje, mientras que los films que contenían ácido p-cumárico y protocatecuico lo hicieron en 21 y 26 días, respectivamente. Por lo tanto, ninguno de los ácidos fenólicos incorporados inhibió el proceso de biodegradación, pero se retardó el proceso, dependiendo del grado de retención del compuesto en la matriz polimérica. Los films bicapa biodegradables constituidos por una capa de almidón-gelano y otra de PLA:PHBV, con y sin ácidos fenólicos, se caracterizaron en sus propiedades mecánicas y de barrera al vapor de agua y al oxígeno y se utilizaron para el envasado de carne de cerdo, evaluando su calidad durante el almacenamiento a 5 °C. La presencia de ácidos fenólicos disminuyó el módulo elástico y la tensión de fractura de las bicapas y mejoró su capacidad de barrera al vapor de agua y al oxígeno. Esto último, junto al efecto activo de los ácidos, contribuyó a mejorar la conservación de la carne durante el almacenamiento, reduciendo los niveles de oxidación lipídica, cambios de pH y pérdidas de peso de las muestras envasadas, así como el crecimiento microbiano, especialmente coliformes totales y bacterias ácido-lácticas. Los films bicapa biodegradables con ácidos fenólicos, a base de almidón y poliésteres, se muestran como una estrategia adecuada para obtener materiales de envasado activo, con propiedades funcionales próximas a las de algunos plásticos sintéticos comúnmente utilizados en el envasado de alimentos. Estos materiales pueden alargar la vida útil de los alimentos, mitigando el impacto ambiental de los envases plásticos ya que pueden ser compostados., [CA] S'han desenvolupat, mitjançant termoprocesat, pel·lícules multicapa biodegradables actives per a l'envasament d'aliments, combinant pel·lícules de midó millorades i d'una mescla de polièsters (PLA-PHBV), amb diferents àcids fenòlics (ferúlic, p-cumàric i protocatecuic). En les pel·lícules midó de iuca o de dacsa es van incorporar gomes d'origen microbià (xantana i gellan) (10%) per a millorar les seues propietats funcionals. Les gomes van millorar les propietats mecàniques i de barrera al vapor d'aigua i a l'oxigen dels films de midó. Aquests films es van combinar amb films mescla de PLA:PHBV en bicapes midó-polièsters per termocompresió. Les bicapes van presentar una alta capacitat barrera a l'oxigen i al vapor d'aigua comparat amb les respectives monocapes. La capa de polièster va contribuir al reforç mecànic de la bicapa, aportant alta capacitat de barrera al vapor d'aigua, mentre que la capa de midó va aportar alta capacitat de barrera a l'oxigen a la bicapa. La bicapa amb midó de iuca i goma gellan va presentar la millor adhesió entre capes, amb propietats funcionals adequades per a l'envasament d'aliments. Els àcids ferúlic, p-cumàric i protocatecuic, amb propietats antimicrobianes i antioxidants, es van incorporar (2%) en els films mescla de PLA:PHBV per a obtindre films actius. Els àcids fenòlics van modificar positivament les propietats de la mescla de polièsters, incrementant el seu mòdul d'elasticitat i resistència a la fractura i la seua capacitat de barrera al vapor d'aigua i a l'oxigen, al mateix temps que van augmentar lleument la Tg del material. L'àcid protocatecuic va provocar els majors efectes, afectant la cristal·lització del PHBV. L'alliberament d'aquests compostos en diferents simulants alimentaris (amb polaritat alta i intermèdia) va ser molt limitada en quant a velocitat i quantitat alliberada, la qual cosa va disminuir la capacitat de les pel·lícules per a inhibir de manera significativa el creixement de Listeria innocua inoculada en medi de cultiu. Aquests films, amb i sense compostos actius, es van desintegrar en condicions de compostatge, sense efecte significatiu dels àcids fenòlics. Els films sense actius i amb àcid ferúlic es biodegradaren completament després de 20 dies de compostatge, mentre que els films que contenien àcid p-cumàric i protocatecuic ho van fer en 21 i 26 dies, respectivament. Per tant, cap dels àcids fenòlics incorporats va inhibir el procés de biodegradació, però es va retardar el procés, depenent del grau de retenció del compost en la matriu polimèrica. Els films bicapa biodegradables constituïts per una capa de midó-gellan i una altra de PLA:PHBV, amb i sense àcids fenòlics es van caracteritzar en les seues propietats mecàniques i de barrera al vapor d'aigua i a l'oxigen i es van utilitzar per a l'envasament de carn de porc, avaluant la qualitat a llarg del emmagatzematge a 5 °C. La presència d'àcids fenòlics va disminuir el mòdul elàstic i la tensió de fractura de les bicapes i va millorar la seua capacitat de barrera al vapor d'aigua i a l'oxigen. Això últim, junt a l'efecte actiu dels àcids, va contribuir a millorar la conservació de la carn durant l'emmagatzematge, reduint els nivells d'oxidació lipídica, canvis de pH i pèrdues de pes de les mostres envasades, així com el creixement microbià, especialment coliformes totals i bacteris àcid-làctics. Els films bicapa biodegradables amb àcids fenòlics, a base de midó i polièsters, es mostren com una estratègia adequada per a obtindre materials d'envasament actiu, amb propietats funcionals pròximes a les d'alguns plàstics sintètics comunament utilitzats en l'envasament d'aliments. Aquests materials poden allargar la vida útil dels aliments, mitigant l'impacte ambiental dels envasos plàstics ja que poden ser compostats., [EN] Active biodegradable multilayer films have been developed by thermoprocessing for food packaging purposes, combining improved starch films and a blend of polyesters (PLA-PHBV), with different phenolic acids (ferulic, p-coumaric and protocatechuic). Into the cassava or maize starch films, gums of microbial origin (xanthan and gellan) were incorporated (10%) to improve their functional properties. The gums improved the mechanical and barrier properties to water vapor and oxygen of the starch films. These films were combined with PLA:PHBV blend films in starch-polyester bilayers by thermocompression. The bilayers exhibited high barrier capacity to oxygen and water vapor compared to their respective monolayers. The polyester layer contributes to the mechanical reinforcement of the bilayer, providing high water vapor barrier capacity, while the starch layer provided high oxygen barrier capacity to the bilayer. The bilayer with cassava starch and gellan gum showed the best interlayer adhesion, with adequate functional properties for food packaging applications. Ferulic, p-coumaric and protocatechuic acids, with antimicrobial and antioxidant properties, were incorporated (2%) in the PLA: PHBV blend films to obtain active films. Phenolic acids positively modified the properties of the polyester blend, increasing its elastic modulus and resistance to break and its barrier capacity to water vapor and oxygen, while slightly increasing the Tg of the material. Protocatechuic acid caused the greatest effects, affecting the crystallization of PHBV. The release of these compounds in different food simulants (with high and intermediate polarity) was very limited in terms of release rate and released amount, which reduced the ability of the films to significantly inhibit the growth of Listeria innocua inoculated in culture medium. These films, with and without active compounds, disintegrated under composting conditions, without significant effect of phenolic acids. Films without active compounds and with ferulic acid biodegraded completely after 20 days of composting, whereas films containing p-coumaric and protocatechuic acids did so in 21 and 26 days, respectively. Therefore, none of the incorporated phenolic acids inhibited the biodegradation process, but the process was delayed, depending on the degree of retention of the compound in the polymeric matrix. The biodegradable bilayer films with a layer of starch-gellan and another of PLA: PHBV, with and without phenolic acids, were characterized as to their mechanical properties and barrier capacity to water vapor and oxygen and were used for packaging of pork meat whose quality development was analysed throughout storage time at 5 °C. The presence of phenolic acids decreased the elastic modulus and resistance to break of the bilayers and improved their barrier capacity to water vapor and oxygen. The latter, together with the active effect of the acids, contributed to improving the preservation of the meat during storage, reducing the levels of lipid oxidation, changes in pH and weight losses of the packed samples, as well as microbial growth, especially total coliforms and lactic acid bacteria. Biodegradable bilayer films with phenolic acids, based on starch and polyesters, appeared as a suitable strategy to obtain active packaging materials, with functional properties close to those of some synthetic plastics commonly used in food packaging. These materials can extend the shelf-life of foods, mitigating the environmental impact of plastic packaging since they can be composted., The authors would like to thank the Ministerio de Ciencia e Innovación of Spain, for funding this study through the Project AGL2016-76699-R and PID2019-105207RB-I00, and the predoctoral research grant # BES-2017-082040
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quality and Shelf-Life Stability of Pork Meat Fillets Packaged in Multilayer Polylactide Films

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, the effectiveness of a multilayer film of polylactide (PLA), fully bio-based and compostable, was ascertained to develop a novel sustainable packaging solution for the preservation of fresh pork meat. To this end, the multilayer PLA films were first characterized in terms of their thermal characteristics, structure, mechanical performance, permeance to water and aroma vapors and oxygen, and optical properties and, for the first time, compared with two commercial high-barrier multilayer packaging films. Thereafter, the multilayers were thermosealed to package fillets of fresh pork meat and the physicochemical changes, lipid oxidation levels, and microbiological counts were monitored in the food samples during storage under refrigeration conditions. Results showed that the meat fillets packaged in PLA developed a redder color and showed certain indications of dehydration and oxidation, being more noticeably after 11 days of storage, due to the higher water vapor and oxygen permeance values of the biopolymer multilayer. However, the pH changes and bacterial growth in the cold-stored fresh pork meat samples were minimal and very similar in the three tested multilayer films, successfully accomplishing the requirements of the food quality and safety standards at the end of storage., This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2019-105207RB-I00. E.H.-G. and S.T.-G. acknowledge MICI for her predoctoral research grant (BES2017-082040) and his Ramón y Cajal contract (RYC2019-027784-I). The authors are also grateful to the Packaging Technologies Department of AINIA for the technical support provided during the determination of the multilayer structures. Derprosa is also acknowledged for gently providing the multilayer PLA film.