Pasar al contenido principal

USO DE ACIDOS FENOLICOS PARA LA OBTENCION DE MATERIALES MULTICAPA ACTIVOS PARA EL ENVASADO DE ALIMENTOS

PRE2020-091929

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PHBV/PCL blend films with active compounds to prolong the shelf life of meat

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Ferri, Arnau
[EN] Active films based on PHBV/PCL (PP) blends in a 1:1 ratio were obtained by melt blending and compression moulding, with and without 6 % (w/w) ferulic acid (FA) or rice straw extract (RSE), obtained by subcritical water extraction at 180 degrees C. These films (PP, PPFA and PPRSE) were characterised as to their functional, structural and heat-sealing properties, and their ability to preserve pork meat. Structural analysis revealed the immiscibility of the polymers in the mixture, although the active compounds improved interfacial adhesion. The microstructure of the PHBV and PCL phases was affected to a different extent by the active compounds. These did not modify the thermal stability of PCL, but RSE reduced the thermal stability of PHBV. The active compounds promoted UVlight blocking in the films, slightly modified their mechanical properties, and reduced the heat seal strength, without significantly affecting oxygen permeability. RSE slightly promoted water vapour permeability. Blend films with both active compounds extended the shelf life of cold-stored pork by up to 5 days compared to films without active compounds, limiting oxidative reactions and inhibiting bacterial growth., This work was supported by the project PID2022-140444OB-I00 and the Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Release and antibacterial action of phenolic acids incorporated into PHBV films

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Ferulic or p-coumaric acids were incorporated (3, 6 or 9%) into PHBV films by melt processing or surface anchoring (3-4% in the film). The release kinetics of phenolics and the films' antibacterial effect against Escherichia coli and Listeria innocua were analysed. At equilibrium, a near 100% release of phenolics was obtained from melt processed films in a low polar simulant (D1: 50% v/v ethanol in water), whereas it ranged between 10% and 38% in a more polar simulant (A: 10% v/v ethanol in water). The diffusion coefficient of FA or PCA in the matrix also rose by 4-30 times in contact with simulant D1. The limited release of the phenolics in contact with aqueous systems hindered the film's antibacterial effect in contact with the inoculated culture media. In contrast, surface-loaded films exhibited a complete release of phenolics in aqueous media and a significant (near 2 log CFU) bacterial growth inhibition., The authors would like to thank project PID2019-105207RB-I00 and the predoctoral contract PRE2020-091929 of the MCIN/AEI/10.13039/501100011033 and Generalitat Valenciana for founding the project CIPROM/2021/071 to carry out this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of active rice straw extracts on the properties and migration of PHBV films

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vieira-De Freitas, Pedro Augusto
[EN] Rice straw extracts (RSE) were obtained by subcritical water extractions at 160 degrees C (RSE160) and 180 degrees C (RSE180). These extracts were analysed as to the main components, phenol content and formation of 5-Hydroxymethylfurfural(5-(hydroxymethyl)furan-2-carbaldehyde (HMF). These were incorporated (6% wt.) into PHBV films by melt blending and compression moulding. Films were characterised as to their physical properties, structural and thermal behaviour, and overall and specific migration of the phenols and HMF in different food simulants. Thermal processing of the films led to a partial degradation of the extracted sugars, producing microholes in the matrix and HMF formation. The RSE slightly reduced the polymer crystallinity, the film stretchability, fracture resistance, and barrier capacity to water vapour and limonene, but improved the oxygen barrier of the films and enhanced their UV light barrier due to the phenol content and antioxidant capacity. The PHBV migration did not reach the overall migration limit (10 mg/dm2) in any simulant while the specific migration of phenols and HMF depended on the food simulant and its concentrations in the films. The near total release of the phenols present in the films was achieved in less polar simulants, equivalent to 30-40 mg GAE/kg of packaged food, for RSE180 films. HMF was mainly released in acidic simulants and those containing ethanol, reaching a maximum value of 0.36 mg/kg, for RSE180 films in which more HMF was formed. This value was much lower than those HMF levels found in many commonly-consumed foods. Therefore, the materials can be considered safe for food packaging., This work was supported by the project PID2022-140444OB-I00 and the Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Thermo-Sealing of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Blending with Polycaprolactone

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable biopolymer from the PHAs family that has potential to replace conventional plastics and reduce plastic pollution. However, PHBV has thermo-sealability issues, making it challenging to use for bags. Blending it with polycaprolactone (PCL) could address this but may alter the barrier properties of the films, affecting their effectiveness as food packaging material. This study examined the properties and heat-sealing capacity of PHBV/PCL blend films (ratios: 60/40, 50/50, and 40/60), obtained by melt blending and compression moulding. Both polymers are immiscible and were in separated phases; the continuous phase was PHBV in the 60/40 blend and PCL in the 40/60 blend, while the 50/50 sample exhibited interpenetrating bicontinuous phases of both polymers. The permeability to water vapour, oxygen, and D-limonene increased as the PCL content rose, especially when it formed the continuous phase in the matrix. The elastic modulus and resistance to break decreased, while extensibility increased, more markedly when PCL was the continuous phase. However, the continuity of PCL phase provided the films with better thermal adhesion and seal strength. The 50/50 blend showed the best balance between heat sealability and barrier properties, making it the most suitable for food packaging in sealed bags., This research was supported by project PID2022-140444OB-I00 and Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and by project CIPROM/2021/071 and project AGROALNEXT/2022/026 funded by Generalitat Valenciana and by the European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyhydroxybutyrate-co-hydroxyvalerate (PHBV) with Phenolic Acids for Active Food Packaging

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] PHBV films incorporating 3, 6 and 9% ferulic acid (FA) or p-coumaric acid (PCA) were obtained by melt blending and compression moulding. The films¿ microstructures and thermal behaviours were analysed as well as their mechanical, optical and barrier properties. The overall and specific migration of the materials in different food simulants was also characterised. FA was homogeneously mixed with the polymer, whereas PCA was mainly dispersed as fine particles in the PHBV matrices due to its higher melting point. These structural features promoted differences in the physical properties of the films depending on the compound concentration. As the concentration of both compounds rose, the barrier capacity of the films to oxygen, and to a lesser extent water vapour, was enhanced. While FA promoted the extensibility of the films, 9% PCA enhanced their brittleness. Both compounds affected the crystallisation pattern of the polymer, promoting smaller crystalline formations and a slight decrease in crystallinity. Although the overall migration of every film formulation was lower than the overall migration limit (OML), the release of active compounds was dependent on the food simulant; almost total release was noted in ethanol containing simulants but was more limited in aqueous systems. Therefore, these films could be used as food contact materials, contributing to extending the food¿s shelf life., Projects: PID2019-105207RB-I00 funded by MCIN/AEI/10.13039/501100011033 and CIPROM/2021/071 funded by Generalitat Valenciana; Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of ferulic acid and active rice straw extract on the composting behaviour of PHBV and PHBV/PCL blend films

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The biodegradation of polymer films is affected both by their composition and structure and by the environmental conditions. Composting behaviour of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films was studied at lab-scale, according to ISO 20200:2023, as affected by its blend (1:1) with polycaprolactone (PCL), and the presence (6 % wt.) of active compounds (Ferulic acid: FA, and rice straw extract: RSE). The film disintegration (mass loss) was monitored over the composting time, by microstructural analysis, FTIR spectroscopy, and thermal analyses. All films disintegrated completely at the end of the test (84 days), but the disintegration rate was affected by the formulation. PHBV and blends films containing RSE exhibited the fastest disintegration whereas blend films without actives were the slowest. In every case, the surface erosion provoked by the biofilm action was the main mechanism responsible for the film thinning, but bulk hydrolysis also occurred to a different extent. RSE, with high content of carbohydrates, promoted the film porosity and bulk hydrolysis of both PHBV and its blend with PCL where the crystallinity of PCL was promoted. FA also accelerated the hydrolysis of the PHBV amorphous phase as well as the crystalline phases of PCL, as deduced from DSC analysis. Therefore, degradation rate was affected by overlapping of the different mechanism, depending on the film composition and structure. Promoting the water diffusion through the film favoured the hydrolytic processes and the enzymatic action of the biofilm microorganisms, whose population and activity could also be affected by film components., This work was supported by the project PID2022 140444OB-I00 and the Grant PRE2020 091929 funded by MCIN/AEI/10.130 39/501100011033 and by the European Union NextGenerationEU/ PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/ 026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.