Pasar al contenido principal

POLIHIDROXIALCANOATOS PARA EL DESARROLLO DE MATERIALES DE ENVASADO BIODEGRADABLES ACTIVOS PARA LA CONSERVACION DE ALIMENTOS

PID2022-140444OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PHBV/PCL blend films with active compounds to prolong the shelf life of meat

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Ferri, Arnau
[EN] Active films based on PHBV/PCL (PP) blends in a 1:1 ratio were obtained by melt blending and compression moulding, with and without 6 % (w/w) ferulic acid (FA) or rice straw extract (RSE), obtained by subcritical water extraction at 180 degrees C. These films (PP, PPFA and PPRSE) were characterised as to their functional, structural and heat-sealing properties, and their ability to preserve pork meat. Structural analysis revealed the immiscibility of the polymers in the mixture, although the active compounds improved interfacial adhesion. The microstructure of the PHBV and PCL phases was affected to a different extent by the active compounds. These did not modify the thermal stability of PCL, but RSE reduced the thermal stability of PHBV. The active compounds promoted UVlight blocking in the films, slightly modified their mechanical properties, and reduced the heat seal strength, without significantly affecting oxygen permeability. RSE slightly promoted water vapour permeability. Blend films with both active compounds extended the shelf life of cold-stored pork by up to 5 days compared to films without active compounds, limiting oxidative reactions and inhibiting bacterial growth., This work was supported by the project PID2022-140444OB-I00 and the Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Bilayer films based on PHBV and proteins containing rutin and carvacrol in Pickering emulsion

  • Guevara-Guerrero, Beatriz
  • Hernandez-Garcia, Eva
  • Sobral, Paulo José do Amaral
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] One strategy to improve the performance of protein-based films is the development of bilayer structures with complementary properties. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable biosynthetic polyester that exhibits complementary barrier properties to those of protein-based films. The objective of this study was to obtain and characterize active bilayer films composed of PHBV/gelatin (GE) or sodium caseinate (SC) monolayers films that incorporate rutin and carvacrol in Pickering emulsion (PE). The bilayers were produced by thermocompression. In general, the incorporation of PE in the monolayer films decreased the oxygen permeability (OP) by 27.6 % for GE and 5 % for SC, respectively, which was attributed to an increase in the film tortuosity and provided the films with remarkable antioxidant activity, especially in the less polar simulant. Furthermore, in gelatin films the incorporation of PE also provided them with greater mechanical resistance (increase 29 %) that suggested the presence of significant phenolics-gelatin interactions. Laminating the protein-based films with a PHBV layer conferred the bilayer films with significantly improved water and oxygen barrier properties (0.15 g/m center dot h center dot kPa and 70 cm3/m center dot h center dot kPa, respectively) and mechanical performance intermediate between those of the respective monolayer films. The PE-loaded bilayer films exhibited enhanced oxygen barrier capacity with a reduction of OP of 16-38 % but with reduced antioxidant activity by similar to 19 % compared to the monolayer films. Furthermore, a mild antimicrobial activity against E. coli was observed in the PE-loaded bilayer films. Given this, the bilayer structures demonstrate potential for extending the shelf life of foods and offer a sustainable alternative for active food packaging., This study was financed in part by the "Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil" (CAPES) - Finance Code 001 (PhD fellowship of B.G.G.) and PhD split fellowship of B.G.G (88887.916357/2023-00), the Brazilian National Council for Scientific and Technological Development (CNPq), for the Grant (40.3746/2021- 3) and Research fellowship of P.J.A.S (30.2482/2022-9), project PID2022-140444OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the "European Union NextGeneration EU/PRTR. Eva Hern andez-Garcia was supported by a Margarita Salas Postdoctoral Fellowship from Universitat Politecnica de Valencia funded by Ministerio de Universidades and the European Union-NextGeneration EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

From agro-industrial waste to active packaging: pomegranate peel as a functional filler in starch-based films [Dataset]

  • Arpante, Irene
  • Cairone, Francesco
  • Cesa, Stefania
  • Martín-Pérez, Laia
  • González Martínez, María Consuelo|||0000-0001-9993-8303
Los datos fueron obtenidos en el contexto de un diseño experimental planteado con el objetivo de desarrollar en última instancia un material de envasado de alimentos activo y de bajo coste incorporando un residuo vegetal proveniente de la industria alimentaria, la piel de patata. El trabajo estudia el efecto de la incorporación de este residuo vegetal bajo en almidón, pretratado o no, sobre las propiedades físicoquímicas y funcionales de películas a base de almidón destinadas a la conservación de alimentos. El estudio pretende contribuir a la valorización de este residuo agroindustrial, en línea con una política de economía circular, a la vez que reducir el impacto negativo sobre el medioambiente de la acumulación de plásticos sintéticos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of active rice straw extracts on the properties and migration of PHBV films

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vieira-De Freitas, Pedro Augusto
[EN] Rice straw extracts (RSE) were obtained by subcritical water extractions at 160 degrees C (RSE160) and 180 degrees C (RSE180). These extracts were analysed as to the main components, phenol content and formation of 5-Hydroxymethylfurfural(5-(hydroxymethyl)furan-2-carbaldehyde (HMF). These were incorporated (6% wt.) into PHBV films by melt blending and compression moulding. Films were characterised as to their physical properties, structural and thermal behaviour, and overall and specific migration of the phenols and HMF in different food simulants. Thermal processing of the films led to a partial degradation of the extracted sugars, producing microholes in the matrix and HMF formation. The RSE slightly reduced the polymer crystallinity, the film stretchability, fracture resistance, and barrier capacity to water vapour and limonene, but improved the oxygen barrier of the films and enhanced their UV light barrier due to the phenol content and antioxidant capacity. The PHBV migration did not reach the overall migration limit (10 mg/dm2) in any simulant while the specific migration of phenols and HMF depended on the food simulant and its concentrations in the films. The near total release of the phenols present in the films was achieved in less polar simulants, equivalent to 30-40 mg GAE/kg of packaged food, for RSE180 films. HMF was mainly released in acidic simulants and those containing ethanol, reaching a maximum value of 0.36 mg/kg, for RSE180 films in which more HMF was formed. This value was much lower than those HMF levels found in many commonly-consumed foods. Therefore, the materials can be considered safe for food packaging., This work was supported by the project PID2022-140444OB-I00 and the Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Thermo-Sealing of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Blending with Polycaprolactone

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable biopolymer from the PHAs family that has potential to replace conventional plastics and reduce plastic pollution. However, PHBV has thermo-sealability issues, making it challenging to use for bags. Blending it with polycaprolactone (PCL) could address this but may alter the barrier properties of the films, affecting their effectiveness as food packaging material. This study examined the properties and heat-sealing capacity of PHBV/PCL blend films (ratios: 60/40, 50/50, and 40/60), obtained by melt blending and compression moulding. Both polymers are immiscible and were in separated phases; the continuous phase was PHBV in the 60/40 blend and PCL in the 40/60 blend, while the 50/50 sample exhibited interpenetrating bicontinuous phases of both polymers. The permeability to water vapour, oxygen, and D-limonene increased as the PCL content rose, especially when it formed the continuous phase in the matrix. The elastic modulus and resistance to break decreased, while extensibility increased, more markedly when PCL was the continuous phase. However, the continuity of PCL phase provided the films with better thermal adhesion and seal strength. The 50/50 blend showed the best balance between heat sealability and barrier properties, making it the most suitable for food packaging in sealed bags., This research was supported by project PID2022-140444OB-I00 and Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and by project CIPROM/2021/071 and project AGROALNEXT/2022/026 funded by Generalitat Valenciana and by the European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Films Containing Phenolic Compounds with Different Molecular Structures

  • La Fuente-Arias, Carla Ivonne|||0000-0003-3435-8679
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] To obtain more sustainable and active food packaging materials, PHBV films containing 5% wt. of phenolic compounds with different molecular structures (ferulic acid, vanillin, and catechin) and proved antioxidant and antimicrobial properties were obtained by melt blending and compression molding. These were characterized by their structural, mechanical, barrier, and optical properties, as well as the polymer crystallization, thermal stability, and component migration in different food simulants. Phenolic compounds were homogenously integrated within the polymer matrix, affecting the film properties differently. Ferulic acid, and mainly catechin, had an anti-plasticizing effect (increasing the polymer glass transition temperature), decreasing the film extensibility and the resistance to breaking, with slight changes in the elastic modulus. In contrast, vanillin provoked a plasticizing effect, decreasing the elastic modulus without notable changes in the film extensibility while increasing the water vapor permeability. All phenolic compounds, mainly catechin, improved the oxygen barrier capacity of PHBV films and interfered with the polymer crystallization, reducing the melting point and crystallinity degree. The thermal stability of the material was little affected by the incorporation of phenols. The migration of passive components of the different PHBV films was lower than the overall migration limit in every simulant. Phenolic compounds were released to a different extent depending on their thermo-sensitivity, which affected their final content in the film, their bonding forces in the polymer matrix, and the simulant polarity. Their effective release in real foods will determine their active action for food preservation. Catechin was the best preserved, while ferulic acid was the most released., The authors acknowledge the financial support of projects PID2022-140444OB-I00 (Agencia Estatal de Investigación) and CIPROM/2021/071 (Generalitat Valenciana) and postdoctoral grant APOST/2021/19 (Generalitat Valenciana) of C.I.A. La Fuente.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradation of Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) in simulated sublittoral marine environment, as affected by reinforcing and antimicrobial agents

  • La Fuente-Arias, Carla Ivonne
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González-Martínez, C.
[EN] Biodegradation of bioplastics in marine ecosystems is affected by biotic and abiotic factors related to the marine zone and the material composition. In this study, the biodegradation and disintegration behavior of PHBV films containing or not containing catechin and cellulose fibers was studied in a simulated Sublittoral zone at laboratory scale. The films were produced by melt blending and compression molding. Biodegradation rate was monitored through the respirometric method, according to the standard ISO 19,679:2020. Disintegration rate (mass loss) of the samples was also analyzed at different exposure times, while the changes in microstructure and thermal behavior of the residual film were characterized. Likewise, the influence of the antimicrobial (catechin) on the bacterial biofilm and taxonomic profiles after 200 exposure days was studied by DNA extraction and the analysis by Amplicon Sequencing. Cellulose fibers slightly accelerated the films' biodegradation by promoting bulk hydrolysis in the matrix due to their hydrophilic nature. In contrast, Catechin delayed the biodegradation and disintegration of PHBV films, which was attributed to its crosslinking effect in the polymer amorphous phase and its influence on the biofilm bacterial population, which could reduce the predominance of enzyme-producing bacteria responsible for film depolymerization., The authors acknowledge the financial support of projects PID2022-140444OB-I00 (Agencia Estatal de Investigacion) and CIPROM/2021/071 (Generalitat Valenciana) and postdoctoral grant APOST/2021/19 of C.I.A. La Fuente from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Production of Polyhydroxyalkanoates for Biodegradable Food Packaging Applications Using Haloferax mediterranei and Agrifood Wastes

  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Vargas, Maria|||0000-0001-6024-0952
[EN] Polyhydroxyalkanoates (PHAs) are high-value biodegradable polyesters with thermoplastic properties used in the manufacturing of different products such as packaging films. PHAs have gained much attention from researchers and industry because of their biobased nature and appropriate features, similar to conventional synthetic plastics. This review aims to discuss some of the recent solutions to challenges associated with PHA production. The implementation of a cost-effective process is presented by following different strategies, such as the use of inexpensive carbon sources, the selection of high-producing microorganisms, and the functionalization of the final materials to make them suitable for food packaging applications, among others. Research efforts are needed to improve the economic viability of PHA production at a large scale. Haloferax mediterranei is a promising producer of PHAs due to its ability to grow in non-sterile conditions and the possibility of using seawater to prepare the growth medium. Additionally, downstream processing for PHA extraction can be simplified by treating the H. mediterranei cells with pure water. Further research should focus on the optimization of the recycling conditions for the effluents and on the economic viability of the side streams reutilization and desalinization as an integrated part of PHA biotechnological production., This research was funded by Agencia Estatal de Investigación of Spain through Project ID2022-140444OB-I00 and by Generalitat Valenciana (Project CIPROM/2021/071).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active PHBV films with ferulic acid or rice straw extracts for food preservation

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Developing of more sustainable food packaging solutions are necessary to better preserve foods while reducing the environmental impact of non-degradable plastics. To this end, active and biodegradable PHBV films were obtained by incorporating 6 % by weight of ferulic acid (FA) or phenol-rich aqueous extracts obtained from rice straw produced at 160 °C (RSE160) and 180 °C (RSE180), under subcritical conditions. These films, prepared by melt blending and compression moulding, showed a high barrier capacity to oxygen and water vapour, and a high UV light blocking effect. The antibacterial action against gram-positive (L. innocua) and gram-negative (E. coli) bacteria in different culture media or food matrices (TSA, fresh salmon and pumpkin) was tested in in-vitro assays. The inhibition of bacterial growth depended on the active component, the culture medium and the type of bacteria. Films containing FA (1.7 log CFU reduction of E. coli and 1.0 log CFU of L. innocua in pumpkin) or RSE180 (1.3 log CFU reduction of E. coli in TSA and 1.1 log CFU of L. innocua in salmon) were the most active and were chosen for producing pouches and packaging pork. The preservation capacity of pork in packaged samples was analysed throughout cold storage (4 °C, 16 days). Both active films reduced bacterial counts and meat oxidation levels, prolonging the shelf life of the meat by 4 (RSE) to 8 (FA) days compared to the control films (PHBV without actives and LDPE). Therefore, this study developed novel biodegradable food packaging capable of extending the shelf life of various foods, including pumpkin, salmon, and pork., This research was supported by the project PID 2022-140444OB-I00 and Grant PRE 2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and the project CIPROM/2021/071 and project AGROALNEXT/2022/026 funded by Generalitat Valenciana and by the European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Polylactic Acid (PLA) Films Incorporating Almond Peel Extracts for Food Preservation

  • Martín-Pérez, Laia
  • Contreras Monzón, Carolina Ivonne|||0000-0003-3377-4531
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Almond peel extracts, containing 0.2-0.8% (w/w) phenolic compounds with notable antioxidant and antimicrobial activities, could be used as a natural source of active compounds for the development of active films for food preservation. In this study, almond peel extracts obtained by subcritical water extraction at 160 and 180 degrees C were incorporated into PLA films (PLA-E160 and PLA-E180). The films were characterized in terms of their microstructure, mechanical, barrier, optical and thermal properties. Furthermore, the release of phenolic compounds and hydroximethylfurfural (HFM) into food simulants with different polarity was evaluated, as well as the film's potential antioxidant and antimicrobial activities. To validate their effectiveness as active packaging materials, shelf-life studies were conducted on fresh orange juice and sunflower oil packaged using PLA-160 films. The results show that the incorporation of the almond peel extracts led to significant changes in the films' microstructure and mechanical properties, which became darker, mechanically less resistant, and stretchable (p < 0.05), with slightly lower thermal stability than neat PLA films. The release of phenolic compounds and HFM from extract-enriched films was promoted in the 95% ethanol simulant due to the matrix swelling and relaxation. Food products packaged with PLA-E160 exhibited slower oxidative degradation during storage, as indicated by the higher ascorbic acid content and hue color in orange juice and lower peroxide content in sunflower oil. Nevertheless, both in vivo and in vitro studies showed no antimicrobial effectiveness from the films, likely due to the limited release of active compounds to the surrounding medium. Thus, almond peel extract conferred valuable properties to PLA films, effectively reducing oxidative reactions in food products sensitive to these deterioration processes., This study forms part of the PID2022-140444OB-I00 project supported by MCIN/AEI/10.13039/501100011033, the AGROALNEXT programme (AGROALNEXT/2022/026) supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and doctoral grant from MCIN/AEI/10.13039/501100011033 and by ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antioxidant and antimicrobial films for sustainable food packaging based on mushroom waste biomass

  • Hernandez-Garcia, Eva
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] In the context of agri-food waste valorisation, mono and bilayer films based on plasticised mushroom waste biomass using the stipes of two different species (Agaricus bisporus and Pleorotus ostreatus) were developed by compression moulding of their dried powders with 20 % glycerol. For the first time, bilayer films were obtained by thermo-compression of the mushroom-based films with monolayers composed of either polylactic acid (PLA) or a 1:1 blend of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(epsilon-caprolactone) (PHBV/PCL). Both mono-and bilayer films were characterized as to their microstructure, mechanical performance, thermal behaviour, barrier and optical properties, as well as their antioxidant and antimicrobial activities against Listeria innocua and Escherichia coli. Both fungal monolayers exhibited comparable mechanical and barrier properties, as well as antioxidant and antibacterial activities. The greatest antioxidant activity was observed for Agaricus bisporus films in the less polar simulant (95 % ethanol), whereas Pleorotus ostreatus films exhibited the best antibacterial capacity, especially against E. Coli. The lamination of these fungal based films with PLA or PHBV/PCL layers significantly improved the mechanical resistance and stiffness of the fungal-based films, while providing them with the respective barrier capacity of each polyester. Nevertheless, both bilayers showed lower antioxidant and antimicrobial activity than the monolayers. These bilayers could be of interest for the development of biodegradable food packaging materials such as trays or films., This work is a part of a research by project funded by the Spanish Ministry of Science and Innovation PID2022-140444OB-I00. Eva Hernandez-Garcia was supported by a Margarita Salas Postdoctoral Fellowship from Universitat Politecnica de Valencia funded by Ministerio de Universidades and the European Union-NextGeneration EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Low-Starch Potato Peel for the Development of Starch-Based Composites [Dataset]

  • Martín-Esparza, M.E.|||0000-0002-0066-6748
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Santos-Iparraguirre, Marta|||0009-0006-3646-8790
  • Chiralt, Amparo|||0000-0003-1134-8144
[ES] Este dataset incluye los datos en bruto reflejados en el artículo científico titulado Low-starch potato peel for the development of starch-based composites obtained by thermocompression moulding de las autoras: Marta Santos-Iparraguirre, Amparo Chiralt, M. Eugenia Martin-Esparza, Chelo González-Martínez publicado en la revista: Sustainable Food Technology Editorial: Royal Society of Chemistry Año: 2026 (accepted on 19-01-2026), Los autores agradecen la ayuda recibida a través de los siguientes proyectos: Polihidroxialcanoatos para el desarrollo de materiales de envasado biodegradables activos para la conservación de alimentos, PID2022-140444OB-I00 financiado por la State Research Agency, y Aprovechamiento integral de residuos agroalimentarios y su aplicación en el desarrollo de envases biodegradables activos para alimentos, AGROALNEXT/2022/026 financiado por European Union NextGenerationEU/PRTR,
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradation behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) containing phenolic compounds in seawater in laboratory testing conditions

  • La Fuente-Arias, Carla Ivonne|||0000-0003-3435-8679
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González-Martínez, Chelo
[EN] Biodegradation in marine medium of PHBV films with or without 5 % wt. of phenolic compounds (catechin, ferulic acid, and vanillin) was assessed at laboratory scale. Respirometric analyses and film disintegration kinetics were used to monitor the process over a period of 162 days. Structural changes in the films were analyzed throughout the exposure period using FESEM, DSC, Thermogravimetric analyses, XRD, and FTIR spectra. Respirometric tests showed complete biodegradation of all materials during the exposure period (the biodegradation half-time ranged between 63 and 79 days) but at different rates, depending on the phenolic compound incorporated. Ferulic acid and vanillin accelerate the PHBV biodegradation, whereas catechin delayed the process. Disintegration kinetics confirmed these results and showed that degradation occurred from the surface to the interior of the films. This was controlled by the degradation rate of the polymer amorphous phase and the formation of a biomass coating on the film surface. This is the result of the compounds generated by polymer degradation in combination with excretions from microorganisms. This coating has the potential to affect the enzyme diffusion to the polymer substrate. Moreover, the cohesion forces of the amorphous phase (reflected in its glass transition temperature) affected its degradation rate, while the slower degrading crystalline fragments were released, thus contributing to the disintegration process on the film's surface. Ferulic acid, with its hydrolytic effect, enhanced degradation, as did vanillin for its plasticizing and weakening effect in the amorphous phase of polymer matrix. In contrast, catechin with cross -linking effect hindered the progress of the material degradation, considerably slowing down the process rate., The authors acknowledge the financial support of projects PID2022-140444OB-I00 (Agencia Estatal de Investigación) and CIPROM/2021/071 (Generalitat Valenciana) and postdoctoral grant APOST/2021/19 of C.I.A. La Fuente from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Biodegradation of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in simulated sublittoral marine environment, as affected by reinforcing and antimicrobial agents [Dataset]

  • La Fuente-Arias, Carla Ivonne
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The influence of the antimicrobial (catechin) on the bacterial biofilm and taxonomic profiles after 200 exposure days of marine biodegradation was studied by DNA extraction and the analysis by Amplicon Sequencing
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Understanding the Code of Life: Holistic Conceptual Modeling of the Genome

  • García-Simón, Alberto|||0000-0001-5910-4363
[ES] En las últimas décadas, los avances en la tecnología de secuenciación han producido cantidades significativas de datos genómicos, hecho que ha revolucionado nuestra comprensión de la biología. Sin embargo, la cantidad de datos generados ha superado con creces nuestra capacidad para interpretarlos. Descifrar el código de la vida es un gran reto. A pesar de los numerosos avances realizados, nuestra comprensión del mismo sigue siendo mínima, y apenas estamos empezando a descubrir todo su potencial, por ejemplo, en áreas como la medicina de precisión o la farmacogenómica. El objetivo principal de esta tesis es avanzar en nuestra comprensión de la vida proponiendo una aproximación holística mediante un enfoque basado en modelos que consta de tres artefactos: i) un esquema conceptual del genoma, ii) un método para su aplicación en el mundo real, y iii) el uso de ontologías fundacionales para representar el conocimiento del dominio de una forma más precisa y explícita. Las dos primeras contribuciones se han validado mediante la implementación de sistemas de información genómicos basados en modelos conceptuales. La tercera contribución se ha validado mediante experimentos empíricos que han evaluado si el uso de ontologías fundacionales conduce a una mejor comprensión del dominio genómico. Los artefactos generados ofrecen importantes beneficios. En primer lugar, se han generado procesos de gestión de datos más eficientes, lo que ha permitido mejorar los procesos de extracción de conocimientos. En segundo lugar, se ha logrado una mejor comprensión y comunicación del dominio., [CA] En les últimes dècades, els avanços en la tecnologia de seqüenciació han produït quantitats significatives de dades genòmiques, fet que ha revolucionat la nostra comprensió de la biologia. No obstant això, la quantitat de dades generades ha superat amb escreix la nostra capacitat per a interpretar-los. Desxifrar el codi de la vida és un gran repte. Malgrat els nombrosos avanços realitzats, la nostra comprensió del mateix continua sent mínima, i a penes estem començant a descobrir tot el seu potencial, per exemple, en àrees com la medicina de precisió o la farmacogenómica. L'objectiu principal d'aquesta tesi és avançar en la nostra comprensió de la vida proposant una aproximació holística mitjançant un enfocament basat en models que consta de tres artefactes: i) un esquema conceptual del genoma, ii) un mètode per a la seua aplicació en el món real, i iii) l'ús d'ontologies fundacionals per a representar el coneixement del domini d'una forma més precisa i explícita. Les dues primeres contribucions s'han validat mitjançant la implementació de sistemes d'informació genòmics basats en models conceptuals. La tercera contribució s'ha validat mitjançant experiments empírics que han avaluat si l'ús d'ontologies fundacionals condueix a una millor comprensió del domini genòmic. Els artefactes generats ofereixen importants beneficis. En primer lloc, s'han generat processos de gestió de dades més eficients, la qual cosa ha permés millorar els processos d'extracció de coneixements. En segon lloc, s'ha aconseguit una millor comprensió i comunicació del domini., [EN] Over the last few decades, advances in sequencing technology have produced significant amounts of genomic data, which has revolutionised our understanding of biology. However, the amount of data generated has far exceeded our ability to interpret it. Deciphering the code of life is a grand challenge. Despite our progress, our understanding of it remains minimal, and we are just beginning to uncover its full potential, for instance, in areas such as precision medicine or pharmacogenomics. The main objective of this thesis is to advance our understanding of life by proposing a holistic approach, using a model-based approach, consisting of three artifacts: i) a conceptual schema of the genome, ii) a method for its application in the real-world, and iii) the use of foundational ontologies to represent domain knowledge in a more unambiguous and explicit way. The first two contributions have been validated by implementing genome information systems based on conceptual models. The third contribution has been validated by empirical experiments assessing whether using foundational ontologies leads to a better understanding of the genomic domain. The artifacts generated offer significant benefits. First, more efficient data management processes were produced, leading to better knowledge extraction processes. Second, a better understanding and communication of the domain was achieved., Las fructíferas discusiones y los resultados derivados de los proyectos INNEST2021 /57, MICIN/AEI/10.13039/501100011033, PID2021-123824OB-I00, CIPROM/2021/023 y PDC2021- 121243-I00 han contribuido en gran medida a la calidad final de este tesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of ferulic acid and active rice straw extract on the composting behaviour of PHBV and PHBV/PCL blend films

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The biodegradation of polymer films is affected both by their composition and structure and by the environmental conditions. Composting behaviour of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films was studied at lab-scale, according to ISO 20200:2023, as affected by its blend (1:1) with polycaprolactone (PCL), and the presence (6 % wt.) of active compounds (Ferulic acid: FA, and rice straw extract: RSE). The film disintegration (mass loss) was monitored over the composting time, by microstructural analysis, FTIR spectroscopy, and thermal analyses. All films disintegrated completely at the end of the test (84 days), but the disintegration rate was affected by the formulation. PHBV and blends films containing RSE exhibited the fastest disintegration whereas blend films without actives were the slowest. In every case, the surface erosion provoked by the biofilm action was the main mechanism responsible for the film thinning, but bulk hydrolysis also occurred to a different extent. RSE, with high content of carbohydrates, promoted the film porosity and bulk hydrolysis of both PHBV and its blend with PCL where the crystallinity of PCL was promoted. FA also accelerated the hydrolysis of the PHBV amorphous phase as well as the crystalline phases of PCL, as deduced from DSC analysis. Therefore, degradation rate was affected by overlapping of the different mechanism, depending on the film composition and structure. Promoting the water diffusion through the film favoured the hydrolytic processes and the enzymatic action of the biofilm microorganisms, whose population and activity could also be affected by film components., This work was supported by the project PID2022 140444OB-I00 and the Grant PRE2020 091929 funded by MCIN/AEI/10.130 39/501100011033 and by the European Union NextGenerationEU/ PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/ 026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.