Pasar al contenido principal

MATERIALES BIODEGRADABLES MULTICAPA DE ALTA BARRERA PARA EL ENVASADO ACTIVO DE ALIMENTOS.

AGL2016-76699-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 68
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antibacterial properties of cinnamic and ferulic acids incorporated to starch and PLA monolayer and multilayer films

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Ferulic (F) and cinnamic (C) acids have shown great potential as antimicrobial additives in the development of active food packaging based on biodegradable polymers. However, previous studies on thermo-processed (TP) PLA matrices with 1 or 2%w/w of these compounds found no microbial growth inhibition due to their limited release. In this study, 2 or 3% of F and C were incorporated into starch and PLA films, using several strategies to promote their release from PLA, in order to obtain effective antimicrobial activity against E. coli or L. innocua. TP starch films with F or C presented antimicrobial capacity, C being more effective than F for both bacteria and L. innocua being more sensitive to both acids. However, PLA films obtained by three different techniques: TP, thermo-processing with the addition of plasticiser (TPP), and solvent casting did not exhibit antibacterial action. The incorporation of ferulic acid methyl ester into PLA films did not improve the anti-microbial effect, which suggested that the release limitation may not be related to chemical interactions with the end chain hydroxyl of PLA. Three-layer PLA as-semblies, with an internal starch film loaded with F or C, were tested using TP-PLA, TPP-PLA, or cast-PLA films as contact layer. Diffusion of F and C through the PLA layer was highly hindered, regardless of the film preparation method. Therefore, no significant bacterial growth inhibition was observed for the three-layered films. The reduced molecular mobility in the PLA matrix was the limiting factor for the compound release and subsequent antimicrobial effect., The authors thank the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Starch-Polyester Bilayer Films with Surface-Incorporated Ferulic Acid

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayer films were developed by combining cassava starch-based films (with 10% gellan gum) and a polyester blend of polylactic acid (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) containing 75% PLA. The monolayers were obtained by melt-blending and compression-molding, and then assembled into bilayers through thermocompression. Ferulic acid (FA) was incorporated into the polyester layer by spraying and drying. The films were characterized in terms of microstructure and functional properties during two months of storage at 25 °C and 53% relative humidity. The bilayers showed improved tensile strength and barrier performance compared to the individual monolayers, making them more suitable for food packaging applications. Incorporation of FA did not significantly alter the films’ mechanical or barrier properties, but provided them with antioxidant and antibacterial activity in aqueous systems, where a complete release of FA was achieved. The physical properties of the bilayers, including thermo-sealing capacity, remained stable throughout storage. Likewise, their antioxidant and antimicrobial activities were preserved over time. Conclusion: These active bilayer films represent a sustainable packaging alternative to conventional non-biodegradable, non-recyclable synthetic laminates. Their antioxidant and antibacterial functions could help extend the shelf-life of foods while ensuring environmental compatibility., The authors thank the Agencia Estatal de Investigacion for the financial support through project PID2019-105207RB-I00. Author Eva Hernandez-Garcia is grateful for the research grant BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradability and disintegration of multilayer starch films with electrospun PCL fibres encapsulating carvacrol

  • Tampau, Alina
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The biodegradation and disintegration of thermoplastic starch multilayers containing carvacrol(CA)-loaded poly-(epsilon-caprolactone) electrospun mats were evaluated under thermophilic composting conditions for 45 and 84 days, respectively, and compared with non-loaded carvacrol films and pure starch films. Sample mass loss, thermogravimetric and visual analyses were performed throughout the disintegration test. The disintegration behaviour of all multilayers was similar, reaching values of 75-80% after 84 days. Biodegradation, assessed by carbon dioxide measurements, revealed that all the carvacrol-free films completely biodegraded after 25 composting days. However, the presence of CA notably affected the compost inoculum activity, thus limiting the biodegradability of the CA-loaded multilayers to a maximum value of around 85% after 45 days. Nevertheless, this value was close to that established by the standard ISO method to qualify as biodegradable material., The authors thank the Ministerio de Economia y Competitividad (MINECO, Spain) for funding this study through the pre-doctoral grant BES-2014-068100 and through the investigation project AGL2016-76699-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integral Fractionation of Rice Husks into Bioactive Arabinoxylans, Cellulose Nanocrystals, and Silica Particles

  • Requena-Peris, Raquel
  • Jiménez Quero, A.
  • Moriana Torró, Rosana
  • Vilaplana Domingo, Francisco Javier
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Rice husk is an important agricultural byproduct that has not been exploited yet to full capacity for advanced applications. The feasibility of obtaining high-value products such as bioactive hemicelluloses and cellulose nanocrystals (CNCs) from rice husk is here demonstrated in a cascade biorefinery process using subcritical water extraction (SWE) prior to bleaching and acid hydrolysis and compared to traditional alkali pretreatments. The proposed SWE process enables the isolation of bioactive arabinoxylans with phenolic acid moieties, thus preserving their antioxidant and antibacterial properties that are lost during alkaline conditions. Additionally, SWE can be combined with subsequent bleaching and acid hydrolysis to obtain CNCs with large aspect ratio, high crystallinity, and thermal stability. The hydrothermal process also enables the recovery of silica particles that are lost during the alkali step but can be recovered after the isolation of the CNCs. Our biorefinery strategy results in the integral valorization of rice husk into their molecular components (bioactive arabinoxylans, cellulose nanocrystals, and silica particles), which can be used as additives for food applications and as reinforcing agents in biocomposite materials, respectively., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant. This research work was also financed with a Short Term Scientific Mission of the COST Action FP1405.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradation of PLA-PHBV Blend Films as Affected by the Incorporation of Different Phenolic Acids

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Films based on a 75:25 polylactic acid (PLA) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend, containing 2% (w/w) of different phenolic acids (ferulic, p-coumaric or protocatechuic acid), and plasticised with 15 wt. % polyethylene glycol (PEG 1000), were obtained by melt blending and compression moulding. The disintegration and biodegradation of the film under thermophilic composting conditions was studied throughout 35 and 45 days, respectively, in order to analyse the effect of the incorporation of the antimicrobial phenolic acids into the films. Sample mass loss, thermo-degradation behaviour and visual appearance were analysed at different times of the composting period. No effect of phenolic acids was observed on the film disintegration pattern, and the films were completely disintegrated at the end of the composting period. The biodegradation analysis through the CO2 measurements revealed that PLA-PHBV blend films without phenolic acids, and with ferulic acid, completely biodegraded after 20 composting days, while p-coumaric and protocatechuic slightly retarded full biodegradation (21 and 26 days, respectively). Phenolic acids mainly extended the induction period, especially protocatechuic acid. PLA-PHBV blend films with potential antimicrobial activity could be used to preserve fresh foodstuff susceptible to microbial spoilage, with their biodegradation under composting conditions being ensured., FundingThis research was funded by Ministerio de Ciencia e Innovacion of Spain through the Project AGL2016-76699-R, PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Starch-polyester bilayer films with phenolic acids for pork meat preservation

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Starch (S) films containing gellan gum (90:10) and polyester (P) blend films (PLA:PHBV, 75:25) with and without ferulic, p-coumaric or protocatechuic acid at 2% (w/w) were obtained by melt-blending and compression moulding for the purposes of obtaining S¿P bilayers by thermo-compressing both monolayers together. These were characterised as to their mechanical and barrier properties and as to their performance as packaging materials for pork meat slices. The incorporation of phenolic acids promoted the water vapour and oxygen barrier capacity of bilayers while reducing their stiffness and resistance to break, mainly in the case of proto- catechuic acid. Phenolic acids significantly improved the antioxidant capacity of the bilayer films, reducing the lipid oxidation of packaged meat during storage. Phenolic acid loaded bilayers also reduced the microbial counts of meat, mainly for lactic acid bacteria. These effects positively affected the development of the sample pH and colour parameters throughout storage. Active starch-polyester bilayer films exhibited great potential as a means of extending the shelf-life and improving the quality preservation of pork meat., The authors would like to thank the Spanish Agencia Estatal de Investigacion, for funding this study through Project PID2019105207RB-I00 and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carvacrol encapsulation in starch or PCL based matrices by electrospinning

  • Tampau, Alina
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Carvacrol (CA) was encapsulated in polar (corn starch-Sodium caseinate, CS:NaCas) or non-polar (poly-¿-caprolactone, PCL) matrices by electrospinning (ES). Electrospunable formulations were prepared with CS:NaCas (9:1 w/w ratio), at 2, 4 and 6 wt % in water, or PCL at 5, 10 and 15 wt% in glacial acetic acid using different CA ratios (0, 5, 10 and 15 wt% with respect to the polymer). The liquid formulations were characterized for electrical conductivity, rheological behaviour and surface tension, and ES process conditions were established. The electrospun structures were analysed as to their nanostructure and CA retention. Geometry of the nanostructures obtained from the PCL systems was nanofibrillar with some beads, whereas it is particles that are mainly deposited for starch systems. PCL systems yielded better CA encapsulation efficiency (EE) than the polar ones, where greater variability was observed. The best EE (around 80%) was obtained for 15% PCL regardless of the CA ratio., The authors would like to thank the Ministerio de Economia y Competitividad of Spain, for funding this study as part of projects AGL2013-42989-R and AGL2016-76699-R and predoctoral research grant # BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antioxidant starch films containing sunflower hull extracts

  • Menzel, C.
  • Vilaplana, F
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] This study exploits sunflower hulls that are by-product from food industry for the extraction of valuable antioxidant compounds that can be used to produce antioxidant food packaging material based on starch. Fast and easy methanolic extraction of milled hulls resulted in an antioxidant extract with 137 mg GAE/100 g hulls and an antioxidant activity against DPPH* with an EC50 value of 73.5 mg raw hull material/ mg DPPH* and chlorogenic acid as main active compound. Already low amounts of extracts (1-6%) were sufficient to produce compression molded starch-glycerol films with antioxidant capacity without the loss of barrier properties. Films with the highest content of antioxidant extract showed the highest antioxidant activity and the lowest oxygen and water vapor permeability. These films were tough but less stretchable. A potential industrial use of these starch films could be in antioxidant packaging as a very thin layer in multilayer food packaging as oxygen barrier and antioxidant capacity., This work was supported by the Swedish Research Council Formas [2015-00550] and by the project AGL2016-76699-R from Spanish Ministerio de Educacion y Ciencia. The authors would like to acknowledge Grefusa (Alzira, Spain) for the donated sunflower hull waste.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the Antifungal Potential of Botanical Compounds to Control Botryotinia fuckeliana and Rhizoctonia solani

  • Sempere Ferre, Francisca
  • Castell-Zeising, Vicente|||0000-0002-4747-1024
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Asamar, Jordi
[EN] The European Union is promoting regulatory changes to ban fungicides because of the impact their use has on the ecosystem and the adverse effects they can pose for humans. An ecofriendly alternative to these chemicals to fight against fungal species with low toxicity is essential oils and their compounds extracted from aromatic plants. The purpose of this study was to evaluate the in vitro antifungal capacity of the botanical compounds eugenol, carvacrol, thymol, and cinnamaldehyde, and the synergy or antagonism of their mixtures, against Botryotinia fuckeliana and Rhizoctonia solani. Different bioassays were performed at doses of 300, 200, 150, and 100 mu g/mL using pure commercial compounds and their combination in potato dextrose agar culture medium. Growth rate and the mycelium growth inhibition parameters were calculated. Phenolic compounds and their combination inhibited the development of species at the different concentrations, with fungicidal or fungistatic activity shown under almost all the tested conditions. When comparing the growth rates of the species in the control plates and treatments, the statistical analysis showed that there were statistically significant differences. The mixture of compounds improved fungicidal activity against the studied species and at a lower concentration of monoterpenes., This research was funded by the Spanish Ministry of Economy and Competitiveness, Programme-oriented Societal Challenges 2016-2019, grant number AGL2016-76699-R-AR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical and antimicrobial properties of cassava starch films with ferulic or cinnamic acid

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Plasticised cassava starch films with 1-2% ferulic or cinnamic acid were obtained by melt blending and compression moulding. Partial losses (about 40%) of the more thermo-sensitive ferulic acid occurred during processing. Incorporation of phenolic acids did not provoke remarkable changes in the oxygen and water vapour permeability of starch films, but these became less water soluble (13-25% reduction), more extensible and less resistant to break, especially with the highest concentration of ferulic acid. Films with 2% of either acid effectively inhibited the growth of E. coli and L. innocua in tests carried out in culture medium; being cinnamic acid more effective than ferulic and L. innocua more sensitive than E. coli; a Log CFU reduction, with respect to the control, higher than 6 was obtained for L. innocua with 2% of cinnamic acid in the films. The growth of both strains was also inhibited in chicken breast (log CFU reduction>2) with 2% of either acid. In fresh-cut melon, the L. innocua growth was significantly inhibited by films with 2% cinnamic acid, but lower growth inhibition of E. coli in fresh-cut melon was observed., The authors thank the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00. Author Ramon Ordonez is grateful to the Honduras 2020 grant program for the support received.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Starch based coatings with thyme essential oil for fruit preservation

  • Sapper, Mayra Ileana
[ES] En esta Tesis, se han analizado diferentes estrategias para adaptar las formulaciones de almidón con el fin de obtener recubrimientos útiles en la conservación poscosecha de frutas. El almidón se sustituyó parcialmente por gomas de origen microbiano (xantano, gelano y pululano) para mejorar las propiedades funcionales de las películas. La adición de gelano a la matriz de almidón, redujo su capacidad de adsorción de agua y la permeabilidad al vapor de agua y oxígeno. Tuvo un efecto positivo en las propiedades mecánicas, mejorando su resistencia a la rotura y previniendo la retrogradación. La goma xantana aumentó la resistencia a la rotura de las películas de almidón, pero no redujo su capacidad de adsorción de agua y la permeabilidad al vapor de agua. La sustitución del almidón por un 10 o 20% de gelano, podría ser una buena estrategia para obtener películas con propiedades más adecuadas con fines de envasado/recubrimiento de alimentos. Se analizaron películas mezcla de almidón-gelano con aceite esencial de tomillo (EO), con el objetivo de proporcionar actividad antifúngica a las formulaciones. El aceite se incorporó mediante emulsificación directa o encapsulado en liposomas de lecitina. Las películas mostraron un efecto antifúngico en las pruebas in vitro contra A. alternata y B. cinerea. La encapsulación del EO promovió una mayor retención del aceite, mejorando su actividad antifúngica, siendo éstas más efectivas contra B. cinerea que contra A. alternata. Una mayor proporción de almidón en el film dio lugar a mayor crecimiento fúngico a baja concentración del compuesto activo. Todas las películas exhibieron alta capacidad de barrera al oxígeno. La lecitina mejoró la capacidad de barrera al vapor de agua y redujo la rigidez, la resistencia a la rotura y la extensibilidad. Las películas con EO encapsulado, con una proporción de almidón-gelano de 8:2, fueron las más efectivas para controlar el crecimiento fúngico. Para aplicar las formulaciones de almidón-gelano como recubrimientos, se analizaron las propiedades superficiales de distintas frutas (manzana, tomate y caqui), y el coeficiente extensibilidad de las formulaciones sobre la superficie de la frutas, en función de la concentración de Tween 85. Las pieles de las frutas evaluadas se comportaron como superficies de baja energía. La adición de Tween 85 a las muestras sin EO, tuvo un efecto positivo en el ángulo de contacto y la tensión superficial. Sin embargo, cuando contenían EO, emulsionado o encapsulado en lecitina, el surfactante ejerció un efecto negativo en estas propiedades, dependiendo de su concentración. Las formulaciones con EO, emulsionado o encapsulado, no requirieron surfactante para mejorar su extensibilidad, mientras que la adición de Tween 85 a una concentración de 5x104 mg/L, mejoró notablemente esta propiedad en formulaciones S:G sin EO. Recubrimientos a base de almidón-gelano, con o sin EO emulsionado o encapsulado en liposomas de lecitina, fueron aplicados en manzanas y caquis. Los recubrimientos no redujeron la pérdida de peso en las manzanas, pero evitaron la pérdida de agua en los caquis. No se observó un efecto significativo de los recubrimientos en las tasas de respiración y el cociente de respiración de los caquis, mientras que estos parámetros aumentaron en manzanas. En los ensayos in vivo, los recubrimientos sin lecitina redujeron la incidencia y severidad de la mancha negra por A. alternata en caquis, y la severidad del moho gris por B. cinerea en manzanas. A pesar de su acción antifúngica in vitro, el EO no ejerció un efecto antifúngico adicional en la fruta. Esto podría explicarse por las interacciones particulares entre los componentes del recubrimiento, la superficie de la fruta y el patógeno. Los recubrimientos a base de almidón-gelano sin lecitina ni EO podrían aplicarse en caquis para controlar la pérdida de peso y reducir la incidencia de A. alternata., [CA] En esta Tesi, s'han analitzat diferents estratègies per a adaptar les formulacions de midó a fi d'obtenir recobriments útils per a la conservació postcollita de fruites. El midó es va substituir parcialment per gomes d'origen microbià (xantano, gelano i pululano) per a millorar les propietats funcionals de les pel¿lícules. L'addició de gelano a les pel¿lícules de midó, va reduir la seua capacitat d'adsorció d'aigua. També va tindre un efecte positiu en les propietats mecàniques, i va millorar la seua resistència a la ruptura i va prevenir els fenòmens de retrogradació. La goma de xantano també va augmentar la resistència a la ruptura de les pel¿lícules de midó, però no va reduir la seua capacitat d'adsorció d'aigua i la permeabilitat al vapor d'aigua. La substitució del midó per un 10 o 20% de gelano, podria ser una bona estratègia per a obtenir pel¿lícules amb propietats més adequades per al envasat/recobriment d'aliments. S'analitzaren les pel¿lícules mescla de midó-gelano amb oli essencial de timó (EO), amb l'objectiu de proporcionar activitat antifúngica a les formulacions. L'oli es va incorporar mitjançant emulsificació directa o encapsulat en liposomes de lecitina. Estes pel¿lícules van mostrar un efecte antifúngic en les proves in vitro contra A. alternata i B. cinerea. L'encapsulació de l'EO en els liposomes de lecitina va promoure una major retenció de l'oli i va millorar la seua activitat antifúngica, sent estes més efectives contra B. cinerea que contra A. alternata. En les formulacions amb una major proporció de midó amb baix contingut en compost actiu va haver un major creixement fúngic. Totes les pel¿lícules van exhibir alta capacitat de barrera a l'oxigen. La presència de lecitina va millorar la capacitat de barrera al vapor d'aigua i va reduir la rigidesa, la resistència a la ruptura i l'extensibilitat. Les pel¿lícules amb EO encapsulat, amb una proporció de midó-gelano 8: 2, van ser les més efectives per a controlar el creixement fúngic. Amb l'objectiu d'aplicar les formulacions de midó-gelano com a recobriments, es van analitzar les propietats superficials de distintes fruites (poma, tomaca i caqui), i el coeficient d'extensibilitat d'estes formulacions sobre la superfície de la fruita, en funció de la concentració de Tween 85. Les pells de les fruites avaluades es van comportar com a superfícies de baixa energia. L'addició de Tween 85 a les formulacions sense EO, va tenir un efecte positiu en els angles de contacte i la tensió superficial. En presència de l'EO, emulsionat o encapsulat en liposomes de lecitina, el tensioactiu va exercir un efecte negatiu en estos valors, depenent de la seua concentració. Els recobriments amb EO, emulsionat o encapsulat, no van requerir tensioactiu per a millorar la seua extensibilitat, mentre que l'addició de Tween 85 a una concentració de 5x104 mg/L, va millorar notablement esta propietat en les formulacions sense EO. Recobriments a base de midó-gelano, amb o sense l'agregat d'EO emulsionat o encapsulat en liposomes, van ser aplicats en pomes i caquis.. Els recobriments no van reduir la pèrdua de pes en les pomes, però van evitar la pèrdua d'aigua en els caquis. No es va observar un efecte significatiu dels recobriments en les taxes de respiració i el quocient de respiració dels caquis, mentre que les taxes i el quocient de respiració van augmentar en les pomes. En els assajos in vivo, els recobriments sense lecitina van reduir la incidència i severitat de la taca negra per A. alternata en els caquis, i la severitat de la floridura grisa per B. cinerea en les pomes. No obstant això, la incorporació de l'EO no va exercir un efecte antifúngic addicional en la fruita. Açò podria explicar-se per les interaccions particulars entre els components del recobriment, la superfície de la fruita i el patogen. Els recobriments a base de midó-gelano sense lecitina o EO de timó podrien aplicar-se en caqui, [EN] In this Thesis, different strategies have been analysed to tailor starch formulations for the purposes of obtaining useful coatings in postharvest fruit preservation. Starch was partially substituted by microbial gums (xanthan, gellan, and pullulan) in order to improve film functional properties. Moisture sorption capacity and water vapour and oxygen permeability were reduced by the presence of gellan gum in the starch films. It also had a positive effect on the tensile properties, enhancing the films' strength and resistance to break and preventing retrogradation phenomena. Xanthan gum increased the tensile strength of the starch films, but did not reduce their water sorption capacity and water vapour permeability. Functional properties were not notably improved by the addition of pullulan. Then, 10 and 20 % starch could be substituted by gellan gum to obtain films with more adequate properties for food packaging/coating purposes. Starch-gellan blend films containing thyme essential oil (EO) were also studied in order to provide antifungal activity to the formulations. This was incorporated either by direct emulsification or encapsulated in lecithin liposomes. These films exhibited antifungal effect in in vitro tests against A. alternata and B. cinerea. The encapsulation of the EO in lecithin liposomes allowed for greater EO retention in the films, enhancing their antifungal activity, which were more effective against B. cinerea than against A. alternata. The antifungal action was slightly affected by the polymer matrix composition. Thus, the greatest starch ratio enhanced the fungal growth when the content of the active compound was low. All the films exhibited high oxygen barrier capacity. The presence of lecithin enhanced their water vapour barrier capacity and reduced the film stiffness, resistance to break and extensibility. The films with lecithin-encapsulated EO, with a starch-gellan ratio of 8:2, were the most effective at controlling fungal growth. In order to apply these starch-gellan formulations as fruit coatings, the surface properties of apple, tomato and persimmon, and the spreadability coefficient of these liquid formulations on the fruit surface, were analysed as a function of the concentration of Tween 85, as surfactant. The fruit skins behaved as low-energy surfaces. The values of the contact angles and surface tension of EO-free formulations were positively influenced by the addition of Tween 85. However, in the presence of emulsified or lecithin-encapsulated thyme EO, the surfactant exerted a negative effect, depending on its concentration. Coating-forming systems containing emulsified or encapsulated EO did not require surfactant to improve their already good spreadability, while Tween 85 at 5x104 mg/L notably improved this property in EO-free formulations. Starch-gellan coatings, containing or not emulsified or lecithin-encapsulated EO, were applied on apples and persimmons. Coatings did not reduce the weight loss in apples, but they prevented water loss in persimmons. In contrast, no significant effect of the coatings was observed on respiration rates and respiration quotient of persimmons, whereas they increased the respiration rates and quotient in apples. Coatings did not affect the changes in fruit firmness either in apples or persimmons. In the in vivo assays, the coatings without lecithin reduced the incidence and severity of black spot caused by A. alternata in persimmons, and the severity of grey mould caused by B. cinerea in apples. The incorporation of EO did not exert an additional antifungal effect on the fruit and seemed to exert a negative effect on some other fruit quality attributes. This could be explained by the particular interactions of the coating components, fruit surface and pathogen. Starch-gellan coatings without lecithin or thyme EO could be used in persimmons to control weight loss and reduce the incidence of infections caused by A. alternata., This work has been founded by the “Ministerio de Economía y Competitividad” of Spain, through the Project AGL2016-76699-R and the “Conselleria de Educación, Investigación, Cultura y Deporte de la Generalitat Valenciana” trough the Santiago Grisolía grant GRISOLIA/2015/001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Incorporation of Carvacrol into Poly (vinyl alcohol) Films Encapsulated in Lecithin Liposomes

  • Andrade, Johana
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Lecithin-encapsulated carvacrol has been incorporated into poly (vinyl alcohol) (PVA) for the purpose of obtaining active films for food packaging application. The influence of molecular weight (Mw) and degree of hydrolysis (DH) of the polymer on its ability to retain carvacrol has been analysed, as well as the changes in the film microstructure, thermal behaviour, and functional properties as packaging material provoked by liposome incorporation into PVA matrices. The films were obtained by casting the PVA aqueous solutions where liposomes were incorporated until reaching 0 (non-loaded liposomes), 5 or 10 g carvacrol per 100 g polymer. The non-acetylated, high Mw polymer provided films with a better mechanical performance, but less CA retention and a more heterogeneous structure. In contrast, partially acetylated, low Mw PVA gave rise to more homogenous films with a higher carvacrol content. Lecithin enhanced the thermal stability of both kinds of PVA, but reduced the crystallinity degree of non-acetylated PVA films, although it did not affect this parameter in acetylated PVA when liposomes contained carvacrol. The mechanical and barrier properties of the films were modified by liposome incorporation in line with the induced changes in crystallinity and microstructure of the films., This research was funded by the Ministerio de Economia y Competitividad (MINECO) of Spain, through the project AGL2016-76699-R. Doctoral grant of author Johana Andrade was funded by the Departamento de Narino-Colombia y la Fundacion CEIBA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Starch-Based Coatings for Preservation of Fruits and Vegetables

  • Sapper, Mayra Ileana
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Considerable research has focused on the control of the physiological activity of fruits and vegetables in postharvest conditions as well as microbial decay. The use of edible coatings (ECs) carrying active compounds (e.g., antimicrobials) represents an alternative preservation technology since they can modify the internal gas composition by creating a modified atmosphere through the regulation of the gas exchange (oxygen, carbon dioxide, volatiles) while also limiting water transfer. Of the edible polymers able to form coating films, starch exhibits several advantages, such as its ready availability, low cost and good filmogenic capacity, forming colourless and tasteless films with high oxygen barrier capacity. Nevertheless, starch films are highly water sensitive and exhibit limited water vapour barrier properties and mechanical resistance. Different compounds, such as plasticizers, surfactants, lipids or other polymers, have been incorporated to improve the functional properties of starch-based films/coatings. This paper reviews the starch-based ECs used to preserve the main properties of fruits and vegetables in postharvest conditions as well as the different factors affecting the coating efficiency, such as surface properties or incorporation of antifungal compounds. The great variability in the plant products requires specific studies to optimize the formulation of coating forming products., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad (MINECO) of Spain, through the projects and AGL2016-76699-R and RTA2015-00037-C02. Mayra Sapper thanks the Conselleria de Educacion, Investigacion, Cultura y Deporte de la Comunitat Valenciana for the Santiago Grisolia grant GRISOLIA/2015/001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wettability of starch-gellan coatings on fruits, as affected by the incorporation of essential oil and/or surfactants

  • Sapper, Mayra Ileana
  • Bonet, M.
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Wettability of coating-forming systems (CFS) based on starch-gellan (80:20) blends, containing or not, emulsified/lecithin-encapsulated thyme essential oil (EO), was analysed in apple, tomato and persimmon fruit. Different concentrations (0-10(5) mg/L) of Tween 85 were incorporated into the CFS in order to know its potentially beneficial effect on the coating spreadability. These fruit skins exhibited high values of the surface tension dispersive component, while being low-energy surfaces (21-29 mN/m). Values of contact angle and surface tension of the starch-gellan solutions were positively affected by the addition of Tween 85 at 5.10(4) mg/L. However, it exerted a negative effect when the CFS contained emulsified or lecithin-encapsulated thyme essential oil. Likewise, wettability of starch-gellan coatings was notably improved with Tween 85 at 5.10(4) mg/L, whereas formulations containing emulsified or encapsulated EO did not require surfactant to improve their already good spreadability., The authors would like to thank the financial support from the Ministerio de Economia y Competitividad (MINECO) of Spain, through the project AGL2016-76699-R. Author Mayra Sapper thanks the Conselleria de Educacion, Investigacion, Cultura y Deporte de la Comunitat Valenciana for the Santiago Grisolfa grant GRISOLIA/2015/001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polylactic acid based materials encapsulating carvacrol obtained by solvent casting and electrospinning

  • Tampau, Alina
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Polylactic acid (PLA) dissolved (15 wt.%) in ethyl acetate (EtAc): dimethyl sulfoxide (DMSO) binary systems (0:1; 1:3, and 2:3 v/v) was used as carrier to obtain carvacrol (CA)-loaded (20 wt.% with respect to PLA) matrices by electrospinning, in comparison with solvent casting. Field emission scanning electron microscopy (FESEM) observations showed that CA-loaded electrospun fibers were thinner than the CA-free ones, and their encapsulating efficiency (EE) increased when EtAc was present in the solvent. The cast films had higher EE (up to 89%) than the electrospun mats (maximum 68%). Thermogravimetric analysis and differential scanning calorimetry revealed that CA-free matrices retain more solvent than the samples with CA; this effect is being more noticeable in fibers rather than in cast films. The thermal analysis revealed stronger retention forces of CA in the fibers than in the cast material and the CA plasticizing effect in the PLA matrices, in accordance with its retained amount. Practical Application The carvacrol-loaded polylactic acid materials obtained in this study are intended to serve as possible active layer in obtaining active (antimicrobial and/or antioxidant) multilayer materials for the packaging of foodstuffs, when applied onto a supporting polymer layer. Active properties of the material, as well as the potential carvacrol sensory impact, in packaged products should be assessed in further studies., The authors thank the Ministerio de Economia y Competitividad (MINECO) of Spain, for the financial support for this study as part of the project AGL2016-76699-R. The author A. Tampau also thanks MINECO for the predoctoral research grant #BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of PLA-PVA surface adhesion in bilayer assemblies by PLA aminolization

  • Tampau, Alina
  • Vicente, Antonio A.
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Poly(lactic acid) (PLA) and poly(vinyl alcohol) (PVA) present complementary barrier properties, and their combination in multilayer assemblies (laminates) could provide materials with more effective barrier capacity for food packaging purposes. However, their low chemical affinity compromises adequate polymer adhesion. Surface free energy modification of thermo-processed PLA films through treatment with 1,6-hexanediamine was used to enhance adhesion with polar PVA aqueous solutions. Treatments of 1 and 3 min increased the polar component of the solid surface tension, while treatments above 10 min provoked a corrosive effect in the films' structure. Extensibility analyses of PVA solutions loaded with carvacrol (15 wt.%) and different Tween 85 ratios on PLA-activated surfaces allowed the selection of the 1-min aminolysed surface for obtaining PLA-PVA bilayers, by casting PVA solutions on the PLA films. This study revealed that despite aminolisation enhancing the PLA surface affinity for aqueous PVA solutions, casting-obtained bilayers presented limited oxygen barrier effectiveness due to heterogeneous thickness of PVA layer in the laminates., The authors acknowledge the financial support provided by the Ministerio de Economia y Competitividad (MINECO) of Spain (project AGL2016-76699-R). The author A. Tampau thanks MINECO for the pre-doctoral research grant #BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Clove Essential Oil and Eugenol as Natural Antifungal Agents to Reduce Postharvest Losses in Melon (Cucumis melo)

  • Giménez Santamarina, Silvia
  • Larran, Silvina
  • Torres-Pagán, Natalia|||0000-0003-2735-8734
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
[EN] Melon is a global crop with a value of USD 31 billion. However, up to 30% of yield is lost due to phytopathogens. Essential oils are a sustainable approach to crop protection and storage, enhancing food security and reducing agricultural losses. We evaluated the antifungal potential of clove essential oil and pure eugenol against Alternaria alternata, Curvularia hawaiiensis, Fusarium oxysporum f. sp. lycopersici (FOL), Fusarium solani f. sp. cucurbitae (FSC), Rhizoctonia solani, and Verticillium dahliae in vitro. We also evaluated the resistance of melons, including eugenol-poor Cucumis melo cv. vedrantais (CMV) and eugenol-rich C. melo cv. makuwa (CMM), to infection caused by FOL and FSC. Chemical analysis of clove oil reveals that eugenol was the main compound, at 89.28%. Clove oil and eugenol at 300 mu g/mL reduced the growth of all fungal species. Pure eugenol exhibited the strongest antifungal activity, with 95-100% growth inhibition. Eugenol-rich melons did not show necrosis or internal rot when inoculated with FSC, and had minimal lesions, while eugenol-poor melons revealed more advanced rot symptoms. Clove oil and eugenol are antifungal alternatives that may improve food safety. These findings demonstrate the high potential of eugenol to reduce postharvest losses in melon and contribute to future breeding programmes aimed at developing contamination-resistant cultivars., This research was funded by the Spanish Ministry of Economy and Competitiveness, Programme-oriented Societal Challenges 2016-2019, grant number AGL2016-76699-R-AR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reinforcement of Thermoplastic Starch Films with Cellulose Fibres Obtained from Rice and Coffee Husks

  • Collazo-Bigliardi, Sofía
  • Ortega-Toro, Rodrigo
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cellulosic fibres from coffee (CF) and rice (RF) husks have been obtained applying chemical treatments and characterized as to their microstructure and thermal behaviour. These materials have been incorporated into glycerol plasticised thermoplastic starch (TPS) films obtained by melt blending and compression moulding at 1 wt%, 5 wt% and 10 wt%. Microstructure, thermal behaviour and optical, tensile and barrier properties of the composites were analysed. Both kinds of micro-fibres improve the film stiffness while reduced the film stretchability. However, CF better maintained the film ductility at 1 and 5 wt%. A network of fine oriented fibres was observed on the surface of the films, while internal fibres exhibited a good adherence to the polymer network. The water vapour permeability of TPS films was not reduced in composites, although oxygen permeability was lowered by about 17%. Film transparency decreased by fibre addition in the UVVIS range. Thermal stability of composites was slightly higher than net TPS films., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Authors also thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel film-forming formulations of the biocontrol agent Candida sake CPA-1: biocontrol efficacy and performance at field conditions in organic wine grapes

  • Carbó, Anna
  • Torres, Rosario
  • Usall, Josep
  • Marín, Anna
  • Teixidó, Neus
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] BACKGROUND The biocontrol agent (BCA) Candida sake CPA-1 has previously effectively reduced Botrytis bunch rot (BBR) and it was also suggested as a promising strategy to control sour rot in grapes under field conditions. However, biocontrol efficacy of solid formulations of CPA-1 has never been tested in field trials. The present study aims to confirm the efficacy against BBR and sour rot in grapes under field conditions of two novel formulations recently developed by the addition of biodegradable coatings using a fluidized-bed spray-drying system. RESULTS Novel film-forming formulations of the BCA C. sake CPA-1 controlled B. cinerea as well as liquid formulation. Sour rot control resulted better in the second season and severity reductions were more satisfactory than incidence control. Visual and cryoSEM observations revealed that film-forming treatments were uniformly distributed on plant surfaces. CPA-1 coating could be observed on grapes at harvest time. CONCLUSION The results of this work suggest that solid formulations would be a competitive alternative to conventional fungicides because they were easy to package and transport, and cell viability could be maintained for a long period of time., The authors thank Cristina Solsona, Celia Sanchez, Andrea Berge and Dani Lastrada for their technical assistance. The authors are grateful to INIA (Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria) and FEDER (Fondo Europeo de Desarrollo Regional) for financial support through national project RTA2012-00067-C02-01. The authors are also grateful to INIA and FSE (Fondo Social Europeo) for the PhD grant awarded to A. Carbo. They are also grateful to the CERCA Programme/Generalitat de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving functional properties of cassava starch-based films by incorporating xanthan, gellan or pullulan gums

  • Sapper, Mayra
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of the partial substitution of cassava starch in edible films for 10 and 20 wt% of gellan, xanthan or pullulan gums was analysed in films obtained by casting. The tensile properties, barrier capacity to water vapour and oxygen and water sorption isotherms of the samples were analysed. The blend of starch with gellan gum was effective to reduce the moisture sorption capacity of starch films while reducing water vapour permeability, enhancing the film strength and resistance to break and preserving films against starch retrogradation throughout the storage time. Xanthan gum improved the tensile behaviour of the starch films, but did not reduce their water sorption capacity and water vapour permeability. Pullulan did not notably improved the functional properties of the starch films. Gellan gum at 10 and 20 wt% in the blend could be used to obtain starch films with more adequate properties for food packaging purposes., This work was supported by the Ministerio de Economia y Competitividad (MINECO) of Spain as a part of projects [AGL2016-76699-R]. Mayra Sapper thanks the Conselleria de Educacion, Investigacion, Cultura y Deporte de la Comunitat Valenciana for the Santiago Grisolia grant [GRISOLIA/2015/001].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(lactic) acid (PLA) and starch bilayer films, containing cinnamaldehyde, obtained by compression moulding

  • Muller, Justine
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayer films from thermoplastic starch and cast amorphous PLA were obtained by compression moulding, incorporating or not cinnamaldehyde in the PLA layer. Films were characterized as to their microstructure and barrier, tensile and optical properties, as well as thermal behaviour, X-ray diffraction pattern and FTIR spectra. Bilayers using semicrystalline PLA, instead of starch, were also analysed for comparison purposes. Despite the lower ratio of cast PLA sheet in the bilayer assembly (about 1/3 of the film thickness), a great improvement in tensile and water vapour barrier properties was achieved with respect to the net starch films, the films maintaining high transparency and oxygen permeability as low as starch films. When cinnamaldehyde was included in the cast PLA sheet, films became thinner dim to the losses of the volatile active during processing, but the improvement in barrier properties was maintained, with lower mechanical resistance. Thermal analyses revealed diffusion of cinnamaldehyde or low molecular weight compounds from cast PLA layer to the adhered sheets (starch or semicrystalline PLA) which contributed to plasticizing the amorphous regions and affected crystallization pattern of PLA, as also revealed by the X-ray diffraction patterns. The obtained results offer an interesting option to obtain high barrier-highly resistant active films from thermoplastic starch and amorphous PLA, including cinnamaldehyde as active compound., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Justine Muller thanks the Generalitat Valenciana for the Santiago Grisolia Grant (GRISOLIA/2014/003). Authors acknowledge the support of Elmira Arab-Tehrany from LIBio, University of Lorraine (France), for the research stay of Justine Muller carrying out the ATR-FTIR and X-Ray Diffraction analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical and Antimicrobial Properties of Compression-Molded Cassava Starch-Chitosan Films for Meat Preservation

  • Valencia-Sullca, Cristina Encarnación
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cassava starch-chitosan films were obtained by melt bending and compression molding, using glycerol and polyethylene glycol as plasticizers. Both the starch/chitosan and the polymer/plasticizer ratios were varied in order to analyze their effect on the physical properties of the films. Additionally, the antimicrobial activity of 70:30 polymer:plasticizer films was tested in cold-stored pork meat slices as affected by chitosan content. All film components were thermally stable up to 200 A degrees C, which guaranteed their thermostability during film processing. Starch and chitosan had limited miscibility by melt blending, which resulted in heterogeneous film microstructure. Polyethylene glycol partially crystallized in the films, to a greater extent as the chitosan ratio increased, which limited its plasticizing effect. The films with the highest plasticizer ratio were more permeable to water vapor, less rigid, and less resistant to break. The variation in the chitosan content did not have a significant effect on water vapor permeability. As the chitosan proportion increased, the films became less stretchable, more rigid, and more resistant to break, with a more saturated yellowish color. The incorporation of the highest amount of chitosan in the films led to the reduction in coliforms and total aerobic counts of cold-stored pork meat slices, thus extending their shelf-life., The authors acknowledge the financial support provided by the Spanish Ministerio de Economia y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Author Cristina Valencia-Sullca thanks the Peruvian Grant National Program (PRONABEC Grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conservation of Tiger Nut Tubers with Natural Biofilm Formulated with Thymus zygis Essential Oil

  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Santamarina Siurana, Mª Cristina|||0000-0002-5816-3115
  • Silvia Giménez
  • Larran, Silvina
  • Roselló, Josefa
[EN] Cyperus esculentus L. var sativus is cultivated in Spain, only in the L'Horta Nord in the Valencia region. In this country, tubers are consumed fresh to make a popular beverage in the Valencia region called "horchata de chufa" (chufa milk). This drink is considered beneficial for human health thanks to its high nutritional value and medicinal importance in several treatments. This work evaluates the antifungal potential of the Thymus zygis essential oil against fungi found in tiger nut warehouses to preserve tubers under the best conditions. The analyzed commercial thyme essential oil belongs to the thymol/p-cymene/gamma-terpinene chemotype. Thymol was found in larger quantities (51.34%), followed by the identified biogenetic precursors p-cymene (35.16%) and gamma-terpinene (3.53%). Carvacrol also appeared, but in small quantities (3.53%). During in vitro tests, the T. zygis EO showed strong inhibition (98.85% to 91.81% MGI) against fungi Alternaria alternata, Fusarium andiyazi, Fusarium incarnatum, and Fusarium oxysporum at 300 mu g/mL. It totally inhibited their growth (100% MGI) at 400 mu g/mL, and did so strongly (75.94%, 72.02%, and 70.78%) with fungi Podospora australis, Penicillium commune, and Cladosporium subuliforme, respectively. Under in vivo conditions, formulated as a protective biofilm, and by forcing the environmental conditions of temperature and humidity to the maximum for fungus F. andiyazi growth on tiger nut tubers, the created film acted as a strong protector against fungal attacks., This research was funded by the Spanish Ministry of Economy and Competitiveness, Programme-oriented Societal Challenges 2016-2019, grant number AGL2016-76699-R-AR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active starch-gelatin films for shelf-life extension of marinated salmon

  • Moreno Marro, Olga
  • Gil, Agueda
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Biodegradable active films were obtained by casting, using glycerol plasticized oxidized corn starch (OS) and bovine gelatine (BG) blends (1:1 mass ratio), with and without ethyl lauroyl arginate (LAE) as antimicrobial agent (13 g LAE/100 g polymer). Water vapour barrier capacity and colour of the films conditioned at 53 or 88% relative humidity were determined. Both LAE incorporation and high RH promoted film browning, coherently with the progression of Maillard reactions between amino groups of gelatine or LAE and carbonyl groups of oxidized starch. These compounds imparted antimicrobial properties to the films with and without LAE, both exhibiting antilisterial activity in in vitro tests. Packaging of marinated salmon samples in these films greatly reduced the total viable counts, which remained below the legal limit after 45 storage days at 5 degrees C. Nevertheless, films were not effective at controlling weight loss of salmon samples during the cold storage., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable active materials containing phenolic acidsfor food packaging applications

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The development of new materials for food packaging applications is necessary to reduce the excessive use of disposable plastics and their environmental impact. Biodegradable polymers represent an alternative means of mitigating the problem. To add value to biodegradable materials and to enhance food preservation, the incorporation of active compounds into the polymer matrix is an affordable strategy. Phenolic acids are plant metabolites that can be found in multiple plant extracts and exhibit antioxidant and antimicrobial properties. Compared with other natural active compounds, such as essential oils, phenolic acids do not present a high sensorial impact while exhibiting similar minimal inhibitory concentrations against different bacteria. This study summarizes and discusses recent studies about the potential of both phenolic acids/plant extracts and biodegradable polymers as active food packaging materials, their properties, interactions, and the factors that could affect their antimicrobial efficiency. The molecular structure of phenolic acids greatly affects their potential antioxidant and antimicrobial capacity, as well as their specific interactions with polymer matrices and food substrates. These interactions, in turn, can lead to plasticizing or cross-linking effects. In the present study, the antioxidant and antimicrobial properties of different biodegradable films with phenolic acids have been described, as well as the main factors affecting the active properties of these films as useful materials for active packaging development. More studies applying these active materials in real foods are required., The authors thank the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00. Author Ramon Ordonez is grateful to the Honduras 2020 grant program for the support received.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biopolymers Carrying Essential Oils, or their Compounds, for Food Antimicrobial Packaging

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Background: Biodegradable antimicrobial materials for food packaging applications are in great demand by the food industry and society alike for the purposes of extending food shelf life, thus reducing the environmental impacts associated with synthetic plastics. Among the natural and non-toxic active compounds available, essential oils and their major components have been widely studied due to their antioxidant and antimicrobial properties together with their Generally Recognized as Safe status. Objective: In this review, the antimicrobial and antioxidant properties of several essential oils and their major compounds are summarized, as well as their action when included in different biopolymer-based matrices. Both the method of incorporating active ingredients into the biopolymer matrix and the yield of such processes as a function of the technique used (casting methods or thermoplastic processing) are also assessed. The effect of active compounds on the functional properties of the films is reviewed, as well as the effective release of the active ingredients into different food systems and food simulants, as affected by polymer-active interactions and the nature of the food. Conclusion: Finally, the antimicrobial action of some of these active compounds (embedded in different biopolymer matrices) is also discussed both in in vitro studies and in antimicrobial tests performed using foods of different compositions., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (Project AGL2013-42989-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antifungal starch-based edible films containing Aloe vera

  • Ortega-Toro, Rodrigo
  • Collazo-Bigliardi, Sofía
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Aloe vera gel, analysed as to its antifungal properties against six fungi causing plant diseases, was found to be most effective against Fusarium oxysporum. It was included in different ratios in starch based films plastiziced with glycerol to obtain antifungal films. These were characterized as to their physical (barrier and optical) and structural properties. Films containing the highest ratio of Aloe vera solids (1:1, with respect to starch) and different glycerol mass ratios with respect to starch (0.15 and 0.25) were analysed as to the water sorption and water plasticization effects, in order to discover the water sensitivity of the films in different RH ambients. Films with 0.15 g glycerol/g starch were more homogenous, with a lower degree of starch crystallization, reduced water vapour permeability and higher gloss and transparency. These films with the highest Aloe vera ratio were effective at controlling fungal decay and weight loss in cherry tomatoes. (C) 2017 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2013-42989-R and AGL2016-76699-R. Rodrigo Ortega-Toro thanks Universidad Nacional Abierta y a Distancia from Colombia for their support through project PIE-01 2016. Authors also thank the Electron Microscopy Service of the Universitat Politecnica de Valencia for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of starch oxidation on the functionality of starch-gelatin based active films

  • Moreno Marro, Olga
  • Cárdenas Estela, Julián
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Biodegradable active films were prepared by casting, using corn starch, with differing oxidation degree, bovine gelatin, glycerol, as a plasticizer, and ethyl lauroyl arginate (LAE) as antimicrobial compound. The films were characterized as to their microstructure, physical properties and water affinity. Starch oxidation with sodium periodate (SP) greatly improved polymer compatibility and crosslinking, especially at 1: 1 glucose: SP molar ratio, which promoted the films' strength (40-92%) and barrier capacity (33 and 40% reduction in water vapour and oxygen permeability, respectively in LAE-free films), while Maillard reactions promoted the film browning. LAE, with amino and carbonyl groups, participated in the condensation reactions, interfering in the network crosslinking. All films with LAE showed bactericidal effect against Listeria innocua and Escherichia coli and LAE free films with oxidized starch inhibited the growth of both bacteria by 1-2 log CFU, due to the antimicrobial properties of Maillard compounds. Blend films with the most oxidized starch and gelatin containing LAE are promising materials for food packaging applications., The authors acknowledge the financial support provided by Ministerio de Economia, Industria y Competitividad (Projects AGL2013-42989-R and AGL2016-76699-R). The authors also thank Oscar Gil and Amparo Ribes from the Institute of Materials Technology (UPV) for the support and assistance in the use of the infrared spectrometer and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of ferulic and cinnamic acids on the functional and antimicrobial properties in thermo-processed PLA films

  • Ordóñez-Lagos, Ramón Alberto
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The incorporation of ferulic or cinnamic acids as antimicrobial agents into PLA matrices to produce films with active properties for food packaging applications is evaluated in this study. The acids were incorporated by thermal processing at 1 and 2 wt% presenting good stability with 84¿98% retentions. The addition of acids provoked about a 5% reduction of elastic modulus and up to 20% reduction in the resistance to break in the PLA films, slightly decreasing their extensibility. Oxygen and water vapor barrier capacities were enhanced by about 6% and 45% respectively for the highest acid concentrations. The acids did not change the glass transition of the polymer but increased the thermal resistance. No significant antimicrobial activity was detected, despite the proven activity of the acids, due to their limited release into the aqueous culture media. Release kinetic studies revealed that significant release was only achieved in intermediate polarity simulant (50% aqueous ethanol), where the final percentages of the active released increased along with the total amount in the films (15% and 31%, respectively, for 2% of ferulic and cinnamic acids). Further studies are necessary to improve the compound release into food matrices and antimicrobial effectiveness., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chitosan films containing encapsulated eugenol in alginate microspheres

  • Valencia-Sullca, Cristina Encarnación
  • Messaoud, Ghazi Ben
  • Laura Sánchez-González
  • Arab Tehrany, Elmira
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Alginate microspheres were prepared by extrusion and ionic gelation based on a vibrating technology to encapsulate eugenol as an active ingredient. The effect of their incorporation on the mechanical and barrier properties of chitosan-based films was evaluated, as well as the kinetics of eugenol release and the antimicrobial effect of the films against Listeria innocua and Escherichia coli. Microsphere addition increased the stretchability of chitosan films and improved their oxygen barrier properties, while no significant changes in hue, whiteness index, and transparency were detected compared to pure chitosan films. The release rate and the final released amount of eugenol in food simulants was enhanced in 3 % acetic acid and was markedly reduced in isooctane. Incorporating encapsulated eugenol into chitosan films enhanced their antimicrobial efficacy, especially in polar liquid media where the diffusion of eugenol from the chitosan matrix was promoted., Cristina Valencia Sullca thanks the Peru National Scholarship Program (PRONABEC). This work was supported by the Spanish Ministry of Economy and Competitiveness [grant number AGL2016-76699-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alginate Films Encapsulating Lemongrass Essential Oil as Affected by Spray Calcium Application

  • Cofelice, M.
  • Cuomo, F.
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The necessity of producing innovative packaging systems has directed the attention of food industries towards the use of biodegradable polymers for developing new films able to protect foods and to extend their shelf-life, with lower environmental impact. In particular, edible films combining hydrophilic and hydrophobic ingredients could retard moisture loss, gas migration and ensure food integrity, reducing the necessity of using synthetic plastics. Alginate-based films obtained from emulsions of lemongrass essential oil (at 0.1% and 0.5%) in aqueous alginate solutions (1%), with Tween 80 as surfactant (0.3%), were obtained by casting and characterized as to microstructure and thermal behavior, as well as tensile, barrier and optical properties. Films were also crosslinked through spraying calcium chloride onto the film surface and the influence of oil emulsification and the crosslinking effect on the final film properties were evaluated. The film microstructure, analyzed through Field Emission Scanning Electron Microscopy (FESEM) revealed discontinuities in films containing essential oil associated with droplet flocculation and coalescence during drying, while calcium diffusion into the matrix was enhanced. The presence of essential oil reduced the film stiffness whereas calcium addition lowered the film¿s water solubility, increasing tensile strength and reducing the extensibility coherent with its crosslinking effect., This research was funded by the Ministerio de Economia y Competitividad (MINECO) of Spain, through the project AGL2016-76699-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Carvacrol encapsulation by electrospinning or solvent casting to obtain biodegradable multilayer active films for food packaging applications

  • Tampau, Alina
[ES] El uso masivo de plásticos sintéticos y su impacto medioambiental obliga a buscar alternativas biodegradables para el envasado de los alimentos,etapa necesaria para su adecuada conservación.Así mismo,la necesidad de incrementar la vida útil de los alimentos ha despertado gran interés en el desarrollo de materiales activos(antimicrobianos y antioxidantes)que mantengan su calidad y seguridad por más tiempo,mediante el uso de compuestos de origen natural,seguros para el consumidor.En este sentido,el desarrollo de materiales biodegradables activos para el envasado de alimentos constituye hoy en día un reto importante para la industria alimentaria.En la presente Tesis Doctoral,se ha estudiado la encapsulación de carvacrol mediante el electroestirado o extensión y secado de diferentes disoluciones poliméricas con carvacrol.Se han utilizado polímeros biodegradables portadores de diferente polaridad(almidón termoplástico:TPS,polivinil-alcohol:PVA, policaprolactona:PCL o ácido poliláctico:PLA)disueltos en el solvente adecuado,con el fin de obtener capas activas.Estas capas se han combinado con otras de polímeros con propiedades complementarias,para obtener laminados activos adecuados para el envasado de alimentos.Los laminados combinaron polímeros polares(TPS o PVA)y poliésteres no polares(PCL o PLA)incorporando el carvacrol en una de las capas.Se evaluó la cinética de liberación del activo,así como la acción antimicrobiana de los materiales obtenidos.Los laminados se caracterizaron en su funcionalidad como material de envase(prop. de barrera,mecánicas u ópticas)así como en su estructura y comportamiento térmico.Los estudios de encapsulación revelaron un mayor potencial encapsulante del carvacrol para los polímeros no polares(PCL;PLA),aunque el PVA mostró también una buena afinidad con el compuesto activo.La matriz de PVA mostró una mayor retención de carvacrol mediante electroestirado de sus disoluciones acuosas que por extensión y secado,sin necesidad de adición de tensoactivos como el Tween85.Para la encapsulación en PLA,se usaron mezclas binarias de solventes aptos para contacto con los alimentos(acetato de etilo y DMSO).En este caso,se obtuvo una mayor eficiencia encapsulante del PLA en los materiales obtenidos por extensión y secado que en los electroestirados.La cinética de liberación del carvacrol de las fibras de PCL explicó el mayor efecto antibacteriano contra E.coli,y el escaso efecto antilisteria.La velocidad de liberación del activo aumentó cuando disminuyó la polaridad de los simulantes alimentarios, mostrando una liberación completa en los sistemas apolares,pero solo hasta 75% en los sistemas acuosos,que requerirían una mayor proporción del activo en el envase para potenciar su efectividad.La combinación de láminas de TPS con fibras de PCL cargadas con carvacrol dio lugar a materiales con una permeabilidad al vapor de agua mejorada,en comparación con los films de almidón,sin efectos relevantes sobre las otras propiedades funcionales estudiadas.Cuando los laminados se probaron in vitro contra cepas G(+) y G(-) mostraron un efecto antibacteriano similar al de las fibras de PCL con carvacrol,pero retrasado en el tiempo.Los estudios de desintegración-biodegradación de los laminados almidón-PCL revelaron que las películas con carvacrol afectaron la actividad del inóculo del compost,disminuyendo ligeramente la biodegradabilidad de las películas,pero alcanzando valores de desintegración similares(75-80%)a las muestras libres de carvacrol.Se obtuvieron también laminados de PLA y PVA mediante la extensión y secado de disoluciones acuosas de PVA con carvacrol.La superficie del PLA fue sometida a aminolización a fin de mejorar la extensibilidad de las disoluciones acuosas.A pesar del incremento de la componente polar de la energía superficial del PLA y su mejorada humectabilidad con las soluciones de PVA,estas bicapas no mostraron una mejora significativa en las propied, [CA] L'ús massiu de plàstics sintètics i el seu impacte mediambiental obliga a buscar alternatives biodegradables per a l'envasament dels aliments necessari per a la seua conservació.Així mateix,la necessitat d'incrementar la vida útil dels aliments ha despertat gran interés en el desenvolupament de materials actius(antimicrobians i antioxidants)que mantinguen la seua qualitat i seguretat per més temps,per mitjà de l'ús de compostos d'origen natural,segurs per al consumidor.En este sentit,el desenvolupament de materials biodegradables actius per a l'envasament d'aliments constituïx un repte important per a la indústria alimentària.En la present Tesi Doctoral,s'ha estudiat l'encapsulació de carvacrol per mitjà de l'electroestirat o extensió i assecat de diferents dissolucions polimèriques amb carvacrol.S'han utilitzat polímers biodegradables portadors de diferent polaritat(midó termoplàstic:TPS, polivinil-alcohol:PVA, policaprolactona:PCL o àcid poliláctic:PLA)dissolts en el solvent adequat,a fi d'obtindre capes actives.Estes s'han combinat amb altres de polímers amb propietats complementàries,per a obtindre laminats actius adequats per a l'envasament d'aliments.Els laminats van combinar polímers polars(TPS o PVA)i poliésters no polars(PCL o PLA)incorporant el carvacrol en una de les capes.Es va avaluar la cinètica d'alliberament de l'actiu,així com l'acció antimicrobiana dels materials obtinguts.Els laminats es van caracteritzar en la seua funcionalitat com a material d'envàs(propietats de barrera, mecàniques o òptiques),així com en la seua estructura i comportament tèrmic.Els estudis d'encapsulació van revelar un major potencial encapsulant del carvacrol per als polímers no polars(PCL i PLA),encara que el PVA va mostrar també una bona afinitat amb el compost actiu.La matriu de PVA va mostrar una major retenció de carvacrol per mitjà d'electroestirat de les seues dissolucions aquoses que per extensió i assecat,sense necessitat d'addició de tensioactius com el Tween 85.Per a l'encapsulació en PLA,es van usar mescles binàries de solvents aptes per a contacte amb els aliments(acetat d'etil i DMSO).Es va obtindre una major eficiència encapsulant del PLA en els materials obtinguts per extensió i assecat que en els electroestirats.La cinètica d'alliberament del carvacrol de les fibres de PCL va explicar el major efecte antibacterià contra Escherichia coli,i l'escàs efecte antilisteria.La velocitat d'alliberament de l'actiu va augmentar quan va disminuir la polaritat dels simulants alimentaris,mostrant un alliberament complet en els sistemes no polars, però només fins a un 75% en els sistemes aquosos,que requeririen una major proporció de l'actiu en l'envàs per a potenciar la seua efectivitat.La combinació de làmines de TPS amb fibres de PCL carregades amb carvacrol va donar lloc a materials amb una permeabilitat al vapor d'aigua millorada,en comparació amb els films de midó, sense efectes rellevants sobre les altres propietats funcionals.Quan els laminats es van provar in vitro contra ceps Gram(+) i Gram(-) van mostrar un efecte antibacterià semblant al de les fibres de PCL amb carvacrol,però retardat en el temps.Els estudis de desintegració-biodegradació dels laminats midó-PCL van revelar que les pel·lícules amb carvacrol van afectar l'activitat de l'inocule del compost,disminuint lleugerament la biodegradabilitat,però aconseguint valors de desintegració semblants(75-80%)a les mostres lliures de carvacrol.Es van obtindre també laminats de PLA i PVA per mitjà de l'extensió i assecat de dissolucions aquoses de PVA amb carvacrol.La superfície del PLA va ser sotmesa a aminolizatció a fi de millorar l'extensibilitat de les dissolucions aquoses.A pesar de l'increment de la component polar de l'energia superficial del PLA i la seua millorada mullabilitat amb les solucions de PVA,estes bicapes no van mostrar una millora significativa en les propietats mecàniques i de barrera, [EN] The massive use of synthetic plastics and their environmental impact makes necessary the search for biodegradable alternatives for food packaging. Likewise, the need to increase the shelf life of food has aroused great interest in the development of active materials (antimicrobial and antioxidant) that maintain food quality and safety for longer periods of time through the use of compounds of natural origin, safe for the consumer. In this sense, the development of active biodegradable materials for food packaging is both a major imperative and challenge for the food industry today. In the present Doctoral Thesis, the encapsulation of carvacrol has been studied by means of the electrospinning or casting of different polymeric solutions with carvacrol. Biodegradable polymers with different polarities (thermoplastic starch: TPS, poly(vinyl-alcohol): PVA, poly-(¿-caprolactone): PCL or poly(lactic acid): PLA) dissolved in the appropriate solvent have been used to obtain active layers. These have been combined with other polymers with complementary properties, to obtain active laminates suitable for food packaging. The laminates combined polar polymers (TPS or PVA) and non-polar polyesters (PCL or PLA) incorporating carvacrol in one of the layers. The release kinetics of the active ingredient was evaluated, as well as the antimicrobial action of the materials obtained. The laminates were characterized in their functionality as a packaging material (barrier, mechanical or optical properties), as well as in their structure and thermal behaviour. Encapsulation studies revealed a higher encapsulating potential of carvacrol for non-polar polymers (PCL and PLA), although PVA also showed a good affinity with the active compound. The PVA matrix showed a higher retention of carvacrol by electrospinning of its aqueous solutions than by casting, without the need for addition of surfactants such as Tween 85. For the encapsulation in PLA, binary mixtures of solvents suitable for food contact (ethyl acetate and DMSO) were used. A higher encapsulation efficiency of PLA was obtained in the materials produced by casting than by electrospinning. The carvacrol release kinetics of PCL fibres explained the higher antibacterial effect against Escherichia coli and the lower antilisterial effect. The release ratio of the active ingredient increased when the polarity of the food simulants decreased, showing a complete release in non-polar systems and only up to 75% in aqueous systems that would require a higher proportion of the active ingredient in the packaging material to enhance its effectiveness. The combination of TPS films with carvacrol loaded PCL fibres resulted in materials with improved water vapour permeabilities, compared to starch films, with no relevant effects on the other functional properties. When the laminates were tested in vitro against Gram (+) and Gram (-) strains, they showed a similar antibacterial effect to that of PCL fibres with carvacrol, but delayed in time. Disintegration-biodegradation studies of PCL-starch laminates revealed that carvacrol films affected the activity of the compost inoculum, slightly decreasing the biodegradability of the laminates, but reaching similar disintegration values (75-80%) to the carvacrol-free samples. PLA and PVA laminates were also obtained by casting aqueous PVA solutions with carvacrol. The surface of PLA was submitted to aminolization in order to improve the extensibility of the aqueous solutions. Despite the increase in the polar component of the PLA surface energy and its improved wettability with PVA solutions, these bilayers did not show significant improvement in mechanical and barrier properties over the PLA monolayers., The authors would like to thank the Ministerio de Economia y Competitividad of Spain, for funding this study as part of projects AGL2013-42989-R and AGL2016-76699-R and predoctoral research grant # BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving properties of thermoplastic starch films by incorporating active extracts and cellulose fibres isolated from rice or coffee husk

  • Collazo-Bigliardi, Sofía
  • Ortega-Toro, Rodrigo
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Hydrothermal (60 min, 180 degrees C) extracts and cellulose fibres from coffee and rice husks were obtained to be incorporated into corn starch films, in order to improve the film functional properties as food packaging material and confer them active properties. Extracts exhibited antioxidant properties (EC50: 5.37-5.29 mg extract solids/ mg DPPH) and antibacterial activity against Listeria innocua and Escheriquia coil (MIC values: 35-45 and 34-35 mg extract solids/mL, respectively). The active extracts improved tensile properties of the starch films; elastic modulus increased by about 350% and films become less stretchable. The cellulosic fibres from both residues were more effective as reinforcing agents in films containing extract solids than in net starch films. Extracts also provoked 30% reduction in the WVP of starch films and 50-85 % reduction in the oxygen permeability, depending on their amount in the films, but no effect of cellulose fibres was observed on barrier properties., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. The authors wish to thank Professor Yineth Pineros-Castro PhD from Universidad Jorge Tadeo Lozano (Bogota, Colombia) and Professor Misael Cortes PhD from Universidad Nacional de Colombia (Medellin, Colombia) for their assistance in the extraction process and spray drying. Authors also thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antifungal potential of Aloe vera in vitro and its use as preharvest treatment to maintain the quality of blueberries during storage

  • Sempere Ferre, Francisca
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Giménez-Santamarina, Silvia
[EN] The postharvest life of most fruits and vegetables is limited by fungal proliferation. In this study, Aloe vera gel was tested at different concentrations to evaluate its antifungal potential against five fungi—Rhizoctonia solani, Curvularia hawaiiensis, Botryotinia fuckeliana, Penicillium italicum, and Verticillium dahliae—which are responsible for significant losses in staple agricultural products such as potatoes, cereals, fruits, and vegetables. The best results were observed for V. dahliae, with complete (100%) and partial (70%) mycelial growth inhibition at 200 and 100 mL/L, respectively. Satisfactory inhibition (>50%) was also recorded for R. solani and B. fuckeliana at 200 mL/L, with antifungal activity against B. fuckeliana maintained even at 100 mL/L. Additionally, Aloe vera extract at 300 mL/L was applied as a coating in the postharvest treatment of blueberries stored at 21 °C and 85% relative humidity. At the end of the experiment, the percentage of rotted berries was significantly lower in the treated group compared with the control. These findings suggest that Aloe vera gel is a promising postharvest treatment to extend shelf life and maintain blueberry quality and turgor during storage.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antilisterial action of PLA films with ferulic acid as affected by the method of incorporation

  • Ordóñez, Ramón
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Previous studies demonstrated that polylactic acid (PLA) films with ferulic acid (F) obtained by melt blending did not release the active compound to exert effective antibacterial action. To solve this problem, different strategies to promote the active properties of PLA-F materials have been studied: film processing by casting with F up to 10% w/w, surface loading of thermoprocessed films with F, by adsorption or pulverisation with F solutions, and electrospinning of PLA-F solutions, using different solvent systems, to obtain nanostructured mats. The materials obtained were characterised by their morphological properties and antilisterial activity. F crystallised inside cast films and on the surface loaded PLA films. Electrospun materials exhibited different morphology, depending on the solvent system of the initial solution; fibre mats were obtained with ethyl acetate-DMSO mixtures, whereas bead structures were mainly formed with glacial acetic acid with or without ethyl acetate. No antilisterial activity was observed in cast films regardless of the F concentration, whereas surface loaded films by adsorption or pulverisation inhibited the listeria growth by about 4 Log (CFU/mL). Electrospun materials only inhibited bacterial growth (3 Log CFU) when these were fibre-structured. Therefore, active films of PLA with F could be only obtained when the active was surface anchored or encapsulated in thin fibre mats, with high surface to volume ratio. In this way, the release of the active compound is promoted, avoiding the problem of its limited internal diffusion through the PLA matrix., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using grafted poly(epsilon-caprolactone) for the compatibilization of thermoplastic starch-polylactic acid blends

  • Collazo-Bigliardi, Sofía
  • Ortega-Toro, Rodrigo
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Thermoplastic starch (S) and polylactic acid (PLA) blend films were obtained by melt blending and compression moulding using grafted polycaprolactone with maleic anhydride and/or glycidyl methacrylate (PCLMG or PCLG) as compatibilizers. The effect of both the PLA ratio in the blend (20 and 40% with respect to starch) and the amount of both compatibilizers (2.5 and 5%) on the film properties was analysed. Compatibilized blends presented a better dispersion of the PLA in the continuous starch phase, but the use of PCLG provoked a phase inversion in the matrix when 40% of the starch was substituted by PLA. The compatibilized blend films exhibited higher values of elastic modulus than pure starch films, but were less extensible. The use of compatibilizers did not affect the film's water vapour permeability, which was reduced by up to 33 or 50% for 20 and 40% PLA, respectively, although inverted films with 40% PLA and 5% PCLG exhibited marked reduction (67%). Compatibilizers decreased the oxygen permeability of the films by about 50%, regardless of the ratio of PLA and the kind and amount of compatibilizer. Therefore, substituting 20% of the starch by PLA and incorporating 5% of PCLG would be a good strategy to obtain films useful for food packaging., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. The authors also wish to thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antimicrobial properties and release of cinnamaldehyde in bilayer films based on polylactic acid (PLA) and starch

  • Muller, Justine
  • Casado Quesada, Alba
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cinnamaldehyde (CIN) loaded amorphous PLA films were obtained by casting, using ethyl acetate as solvent. Likewise, bilayer films were obtained by thermocompression of the PLA active layer and compression moulded cassava starch (S) films or semi crystalline PLA films. Starch-PLA laminated materials were considered to improve the barrier capacity (high oxygen barrier through the starch layer and high water vapour capacity through the polyester layer), while CIN incorporation confers antimicrobial activity on the films. The PLA bilayers were obtained for comparison purposes. The antimicrobial activity of the CIN loaded PLA films and S bilayer films was proved against Escherichia coli and Listeria Innocua through in vitro tests, which indicates that the active amount released into the growth medium exceeded the minimum inhibitory concentration (MIC) of both bacteria. The release kinetics of the active compound in different food simulants demonstrated that a part of CIN was tightly bonded to the PLA matrix, whereas the free compound diffused more easily through the starch layer, making S bilayers more active against the bacteria when the starch layer was in direct contact with the culture medium. CIN entrapped in PLA bilayers did not exhibited any antibacterial effect due to its release inhibition, associated to its bonding within the PLA matrix and the lower degree of relaxation in the semi crystalline PLA layer in contact with the food simulants., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Justine Muller thanks the Generalitat Valenciana for the Santiago Grisolia Grant (GRISOLIA/2014/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Eugenol and carvacrol migration from PHBV films and antibacterial action in different food matrices

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The antibacterial effect of PHBV films with oregano or clove essential oil, or their main compounds, carvacrol (CA) and eugenol (EU), respectively, was analysed in food matrices (cheese, chicken breast and pumpkin and melon) and in vitro test for Escherichia coli and Listeria innocua. The migration of CA and EU in the different food matrices was determined to analyse the food matrix effect on the film¿s antimicrobial effectiveness. The antimicrobial activity in foods was less remarkable than in in vitro test. Despite the antilisterial effect in the in vitro test, this was not noticed in any food matrix. The most significant antibacterial effects against E. coli were observed in cheese and pumpkin, whereas the highest migration of both CA and UE took place in melon. This lack of correlation reflected that many compositional factors affect the active compound¿s availability to exert its antibacterial action in a specific food., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biodegradable materials based on poly(vinyl alcohol) (PVA) and poly (lactic acid) (PLA) with antioxidant and antimicrobial activity for food packaging applications

  • Andrade Chapal, Johana Carolina
[ES] El uso masivo de plásticos y su impacto medioambiental, así como la necesidad de mejorar la conservación de los alimentos, hace necesario el desarrollo de alternativas biodegradables para el envasado activo de alimentos. La presente Tesis Doctoral, se ha centrado en el desarrollo de películas activas, basados en polímeros biodegradables con propiedades complementarias, con el fin de obtener materiales con propiedades mecánicas y de barrera adecuadas para cumplir con los requisitos del envasado alimentario. Para ello, se consideraron el poli (vinil alcohol) (PVA) y el poli (ácido láctico) PLA. Asimismo, el carvacrol y los ácidos ferúlico y cinámico fueron elegidos como compuestos activos naturales. Se estudió la encapsulación del carvacrol en liposomas de diferentes tipos de lecitina para mejorar su retención durante la etapa de formación del film. La lecitina de soja enriquecida en fosfatidilcolina fue la más eficaz para mantener la estabilidad de la emulsión de carvacrol, resultando en films con mayor retención. La incorporación de carvacrol (encapsulado o no), modificó ligeramente la microestructura y las propiedades físicas de los films, así como la cristalinidad y el comportamiento térmico del polímero. El PVA totalmente hidrolizado proporcionó films con un mejor desempeño mecánico y capacidad de barrera al oxígeno, pero con menor retención de carvacrol. Por el contrario, el PVA parcialmente hidrolizado dio lugar a films más homogéneos, con mayor contenido de carvacrol. Mientras que los grupos acetilos protegieron al polímero de la termodegradación, permitiendo la obtención de films mediante las técnicas habituales del procesado industrial. Por lo tanto, el PVA parcialmente hidrolizado tiene un gran potencial para la producción de films activos, con más posibilidades de procesamiento que el PVA totalmente hidrolizado. Se incorporaron también ácido cinámico y ferúlico, con menor impacto sensorial que el del carvacrol, al PVA parcial y totalmente hidrolizado, mediante casting de las soluciones acuosas con glicerol para mejorar la solubilidad de los ácidos. Los films de PVA plastificados con glicerol mostraron una menor capacidad de barrera que los no plastificados. La incorporación del ácido ferúlico promovió mayores cambios en las propiedades de los films que el ácido cinámico, debido a un efecto de reticulación, que promovió la cristalinidad, la rigidez y la capacidad de barrera del material. También se obtuvieron películas plastificadas a base de PVA parcialmente hidrolizado con ácidos fenólicos, mediante mezclado en fundido y moldeo por compresión. Los films termoprocesados fueron menos extensibles y resistentes a la rotura y más permeables al oxígeno y al vapor de agua. Estudios in vitro demostraron que los films con ácidos fenólicos obtenidos por casting o termoprocesado presentaron actividad antioxidante y antimicrobiana, especialmente con ácido ferúlico. Con el objetivo de cumplir los requisitos de envasado de alimentos, se obtuvieron films tricapa por termocompresión, compuestos por una capa central de PVA, cargada con compuestos activos (carvacrol o ácido ferúlico), y dos capas externas de PLA. La termocompresión fue eficaz para la adhesión interlaminar. Las multicapas mostraron un rendimiento mecánico próximo al de los films de PLA y una elevada capacidad de barrera al oxígeno y al vapor de agua. Todos los laminados con compuestos activos incorporados a la capa de PVA fueron eficaces para controlar el crecimiento microbiano en filetes de carne de vacuno envasada. Por tanto, el laminado de films de PVA y PLA parcialmente hidrolizado representa una estrategia adecuada para obtener materiales de envasado con propiedades funcionales más próximas a las de algunos plásticos convencionales utilizados en el envasado alimentario. Asimismo, estos materiales con carvacrol o ácido ferúlico incorporados podrían utilizarse para el envasado de alimentos altamente susceptibles a procesos oxidativos o de degradación microbiológica para alargar su vida útil., [CA] L'ús massiu de plàstics i el seu impacte mediambiental, així com la necessitat de millorar la conservació dels aliments, fa necessari el desenvolupament d'alternatives biodegradables per a l'envasament actiu d'aliments. La present Tesi Doctoral, s'ha centrat en el desenvolupament de pel·lícules actives, basats en polímers biodegradables amb propietats complementàries, amb la finalitat d'obtindre materials amb propietats mecàniques i de barrera adequades per a complir amb els requisits de l'envasament alimentari. Per a això, es van considerar el poli (vinil alcohol) (PVA) i el poli (àcid làctic) PLA. Així mateix, es van triar el carvacrol i els àcids ferúlic i cinàmic, com a compostos actius. Es va estudiar l'encapsulació del carvacrol en liposomes de diferents tipus de lecitina per a millorar la seua retenció durant l'etapa de formació del film. La lecitina de soja enriquida en fosfatidilcolina va ser la més eficaç per a mantindre l'estabilitat de l'emulsió de carvacrol, resultant en films amb major retenció. La incorporació de carvacrol (encapsulat o no), va modificar lleugerament la microestructura i les propietats físiques dels films, així com la cristalinitat i el comportament tèrmic del polímer. El PVA totalment hidrolitzat va proporcionar films amb un millor exercisc mecànic i capacitat de barrera a l'oxigen, però amb menor retenció de carvacrol. Per contra, el PVA parcialment hidrolitzat va donar lloc a films més homogenis, amb major contingut de carvacrol. Mentre que els grups acetils van protegir el polímer de la termodegradació, permetent l'obtenció de films mitjançant les tècniques habituals del processament industrial. Per tant, el PVA parcialment hidrolitzat té un gran potencial per a la producció de films actius, amb una més àmplia gamma de possibilitats de processament que el PVA totalment hidrolitzat. Es van incorporar també àcid cinàmic i ferúlic, amb menor impacte sensorial que el del carvacrol, al PVA parcial i totalment hidrolitzat, mitjançant càsting de les solucions aquoses amb glicerol per a millorar la solubilitat dels àcids. Els films de PVA plastificats amb glicerol van mostrar una menor capacitat de barrera que els no plastificats. La incorporació de l'àcid ferúlic va promoure majors canvis en les propietats dels films que l'àcid cinàmic, a causa d'un efecte de reticulació, que va promoure la cristalinitad, la rigidesa i la capacitat de barrera del material. També es van obtindre pel·lícules plastificades a base de PVA parcialment hidrolitzat amb àcids fenòlics, mitjançant barrejat en fos i emotlament per compressió. Els films termoprocessats van ser menys extensibles i resistents al trencament i més permeables a l'oxigen i al vapor d'aigua. Estudis in vitro van demostrar que els films amb àcids fenòlics obtinguts per càsting o termoprocessat van presentar activitat antioxidant i antimicrobiana, especialment amb àcid ferúlic. Amb l'objectiu de complir els requisits d'envasament d'aliments, es van obtindre films tricapa per termocompressió, compostos per una capa central de *PVA, carregada amb compostos actius (carvacrol o àcid ferúlic), i dues capes externes de PLA. La termocompressió va ser eficaç per a l'adhesió interlaminar. Les multicapes van mostrar un rendiment mecànic pròxim al dels films de PLA i una elevada capacitat de barrera a l'oxigen i al vapor d'aigua. Tots els laminatges amb compostos actius incorporats a la capa de PVA van ser eficaces per a controlar el creixement microbià en filets de carn de boví envasada. Per tant, el laminatge de films de PVA i PLA parcialment hidrolitzat representa una estratègia adequada per a obtindre materials d'envasament amb propietats funcionals més pròximes a les d'alguns plàstics sintètics utilitzats en l'envasament alimentari. Així mateix, aquests materials amb carvacrol o àcid ferúlic incorporats podrien utilitzar-se per a l'envasament d'aliments altament susceptibles a processos oxidatius o de degradació microbiològica per a allargar la seua vida útil., [EN] The massive use of synthetic plastics and their environmental impact, as well as the need of improving food preservation, makes necessary the development of biodegradable alternatives for food active packaging. The use of active compounds from natural origin to obtain this kind of materials is a new trend based of the consumer demand for safer and healthier products. The present Doctoral Thesis, has been focused on the development of active packaging films, based on biodegradable polymers with complementary properties, in order to obtain materials with adequate mechanical and barrier properties to meet food packaging requirements. To this end, poly (vinyl alcohol) (PVA) and poly (lactic acid) (PLA) were considered. Likewise, carvacrol and ferulic and cinnamic acid, were chosen as active natural compounds. The liposomal encapsulation of carvacrol, using different kinds of lecithin was evaluated in order to improve the carvacrol retention in the polymer matrix during the film formation step. Soy lecithin enriched in phosphatidylcholine was the most effective at maintaining the stability of the carvacrol emulsion, leading to its highest retention in the PVA films. Incorporation of carvacrol (lecithin encapsulated or not) slightly modified the film microstructure and physical properties and polymer crystallinity and thermal behaviour. The fully hydrolysed PVA provided films with a better mechanical performance and oxygen barrier capacity, but with less carvacrol retention. In contrast, partially hydrolysed PVA gave rise to more homogenous films with a higher carvacrol content. Acetyl groups protect the polymer for thermodegradation, allowing the film production using the common industrial thermoplastic processing techniques. Therefore, partially hydrolysed PVA has a great potential for the production of active films, with a wider range of processing possibilities than fully hydrolysed PVA. Cinnamic and ferulic acids, with lower potential sensory impact than of carvacrol, were also incorporated into partially and fully hydrolysed PVA by casting of aqueous solutions containing glycerol to improve the acid solubility. Glycerol plasticized PVA films exhibited poorer barrier capacity than those non-plasticized. The incorporation of ferulic acid promoted greater changes in the film properties than cinnamic acid, due to a crosslinking effect, which promoted crystallinity, stiffness and barrier capacity of the material. Glycerol plasticized films based on partially hydrolysed PVA with phenolic acids were also obtained by melt blending and compression moulding. Termoprocessed films were less stretchable and resistant to break and more permeable to oxygen and water vapor. In vitro studies demonstrated that cast and termoprocessed films containing phenolic acids exhibited antioxidant and antimicrobial activity, especially with ferulic acid. Three-layer films composed of a central layer of PVA loaded with active compounds (carvacrol lecithin encapsulated or not, or ferulic acid) and two external PLA layers were obtained by thermo-compression, aimed to meet food packaging requirements. Thermocompression was effective for the interlaminar adhesion. Multilayers exhibited mechanical performance close to the PLA sheets and high oxygen and water vapour barrier capacity. All laminates with active compounds incorporated into the PVA sheet were effective at controlling microbial growth in packaged beef meet. Therefore, lamination of partially hydrolysed PVA and PLA films represents a successful strategy to obtain packaging materials with functional properties closer to those of some conventional plastics commonly used in food packaging. Likewise, these materials incorporating carvacrol or ferulic acid could be used for packaging of foods highly susceptible to oxidative or microbiological degradative process to extend their shelf life., The authors acknowledge the financial support of the Agencia Estatal de Investigacion, Ministerio de Economía y Competitividad (MINECO) of Spain through the projects AGL2016-76699-R and PID2019-105207RB-100. Author Johana Andrade thanks the Departamento de Nariño-Colombia y la Fundación CEIBA for the doctoral grant. The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liposomal Encapsulation of Carvacrol to Obtain Active Poly (Vinyl Alcohol) Films

  • Andrade, Johana
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Lecithins of different origins and compositions were used for the liposomal encapsulation of carvacrol within the framework of the development of active films for food packaging. Liposomes were incorporated into aqueous polymeric solutions from fully (F) and partially (P) hydrolysed Poly (vinyl alcohol) (PVA) to obtain the films by casting. The particle size distribution and zeta-potential of the liposomal suspensions, as well as their stability over time, were evaluated. Liposomal stability during film formation was analysed through the carvacrol retention in the dried film and the film microstructure. Subtle variations in the size distributions of liposomes from different lecithins were observed. However, the absolute values of the zeta-potential were higher (-52, -57 mV) for soy lecithin (SL) liposomes, followed by those of soy lecithin enriched with phosphatidylcholine (SL-PC) (-43, -50 mV) and sunflower lecithin (SFL) (-33, -38 mV). No significant changes in the liposomal properties were observed during the study period. Lyotropic mesomorphism of lipid associations and carvacrol leakage occurred to differing extents during the film drying step, depending on the membrane lipid composition and surface charge. Liposomes obtained with SL-PC were the most effective at maintaining the stability of carvacrol emulsion during film formation, which led to the greatest carvacrol retention in the films, whereas SFL gave rise to the least stable system and the highest carvacrol losses. P-PVA was less sensitive to the emulsion destabilisation due to its greater bonding capacity with carvacrol. Therefore, P-PVA with carvacrol-loaded SL-PC liposomes has great potential to produce active films for food packaging applications., The authors acknowledge the financial support of the Agencia Estatal de Investigacion, Ministerios de Ciencia e Innovacion y de Universidades of Spain (projects AGL2016-76699-R and PID2019-105207RB-100). Author Johana Andrade thanks the Departamento de Narino-Colombia y la Fundacion CEIBA for the doctoral grant. The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermoprocessed starch-polyester bilayer films as affected by the addition of gellar or xantham gum

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Monolayer films based on cassava starch (CS) or maize starch (MS), with and without 10% of gellan or xanthan gum, and PLA-PHBV (75:25) blend films, were obtained by melt-blending and compression moulding, using glycerol (for starch blends) and PEG 1000 (for polyester blends) as plasticisers. Bilayer films were obtained by thermo-compression of the different starch based sheets with the polyester sheet. Both mono and bilayers were characterised as to their mechanical and barrier properties, equilibrium moisture, water solubility and microstructure. The incorporation of gellan gum and xanthan gum improved the mechanical properties of starch-based films, especially in the case of MS, although the highest EM and TS values were obtained for CS-gum films. The incorporation of either gellan or xanthan gum decreased the water vapour and oxygen permeability of starch-based films; the CS films with gums being the least permeable to oxygen. The lowest changes in mechanical properties throughout storage were obtained in cassava starch-based films, especially those containing xanthan gum. Starch based-polyester bilayers presented a high oxygen and water vapour barrier capacity, as compared to their individual monolayers. Bilayer films with cassava starch including the gums showed the lowest OP and WVP values and the highest elastic modulus and tensile strength, with extensibility values in the range of the corresponding monolayers and slight changes in their physical properties throughout time. The bilayer formed with cassava starch with gellan gum and a PLA-PHBV appeared as the best option for food packaging purposes taking into account its functional properties and the good layer adhesion of the bilayer., The authors would like to thank the Ministerio de Ciencia e Innovacion of Spain, for funding this study through the Project AGL2016-76699-R and PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Starch-gelatin antimicrobial packaging materials to extend the shelf life of chicken breast fillets

  • Moreno Marro, Olga
  • Cruz-Romero, Malco C.
  • Kerry, Joseph
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Antimicrobial starch:gelatin (1:1) films containing N-¿-lauroyl-l-arginine ethyl ester monohydrochloride (LAE) (10 % wt.) were used as food contact active layers in chicken breast fillets vacuum-packaged in polyamide/polyethylene pouches. Active layers were thermoprocessed (TP) or cast (OC) on the plastic film. Oxidized starch was used in OC coatings. Packaged chicken breast samples were stored at 4¿°C and their physicochemical properties (pH, colour and lipid oxidation) and microbial quality were analysed throughout storage. Both TP and OC films significantly (p¿<¿0.05) extended the shelf life of chicken breast fillets compared to control samples. The starch oxidation reaction in OC films promoted the formation of Maillard reaction compounds in the starch-gelatine blends, which enhanced the antimicrobial effectiveness of the OC films, but also promoted oxidative processes. This greatly affected the pH and colour parameters in OC packaged samples. Therefore, TP blend films containing LAE are recommended since they effectively extended the shelf life of chicken breast fillets without affecting the meat oxidation., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (Projects AGL2016-76699-R and AGL2013-42989-R). Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Release kinetics of carvacrol and eugenol from poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films for food packaging applications

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] 13 wt.% of active compounds (carvacrol-CA, eugenol-EU) were obtained by spraying the active between PHBV layers and their subsequent adhesion. Release kinetics of CA and EU in food simulants of different polarity was analysed and the films antimicrobial activity was predicted, taking the minimal inhibitory concentration against some foodborne pathogens into account. Overall migration values were also determined. At equilibrium, an almost total release of both CA and EU occurred in 50% ethanol, about 20 and 50% of CA and EU, respectively, was delivered in the more aqueous simulants and 65 70% in fatty systems. The release rate increased when the polarity of aqueous simulants decreased, but it fell markedly in fatty systems. EU was released faster than CA in the less polar simulants, but more slowly in the more aqueous systems., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antioxidant starch-based films with encapsulated eugenol. Application to sunflower oil preservation

  • Talón-Argente, Emmanuelle
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Starch films containing eugenol, which was added to the film-forming dispersion in free form or encapsulated with different wall materials (whey protein or lecithin), were obtained by casting. The physical and the antioxidant properties of the films, the release kinetics of eugenol in different food simulants and their performance at preventing sunflower oil oxidation during storage were evaluated. Encapsulated eugenol modified the film microstructure, yielding less stretchable films with reduced water affinity, transparency and oxygen permeability as compared to films formulated with non-encapsulated eugenol. The addition of eugenol microcapsules containing oleic acid promoted the eugenol retention in the starch matrix during film formation and thus, these films exhibited the greatest antioxidant activity. Films developed with encapsulated eugenol powder containing lecithin and oleic acid were highly effective at preventing sunflower oil oxidation even throughout 53 days of storage at 30¿°C, maintaining low and almost constant values of peroxide index, conjugated dienes and trienes in comparison with the control samples., The authors acknowledge the financial support provided by the Spanish Ministerio de Educacion y Ciencia (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talon thanks the Universitat Politecnica de Valencia for a FPI Grant (99/2011). The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of active phenolic acids on properties of PLA-PHBV blend films

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Phenolic acids (ferulic, p-coumaric, and protocatechuic) have been incorporated into polylactic (PLA): Poly(3hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) (75:25) blend films that were obtained by melt-blending and compression moulding, using PEG1000 as a plasticizer. Film microstructure, thermal behavior, functional properties, and release kinetics of phenolic acids in different food simulants were analyzed, and the film antimicrobial activity against Listeria innocua. Phenolic acids led to an increase in the glass transition temperature of PLA while PHBV supercooling occurred in the films containing protocatechuic acid, which affected their thermal degradation behavior. Polymer matrices with phenolic acids were stiffer and more resistant to break than the polyester blend, but with similar extensibility, while oxygen and water vapor barrier capacity were also improved, especially in films containing protocatechuic acid. The release rate and ratio of phenolic acids increased when the polarity of the food simulant decreased, although very slow delivery was observed in all cases. The limited release of active compounds in aqueous media provoked that films did not significantly inhibit the growth of Listeria innocua in inoculated culture medium., Acknowledgements The authors would like to thank the Ministerio de Ciencia e Innovación of Spain, for funding this study through the Project AGL2016-76699-R and PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Release of polyphenols from starch-chitosan based films containing thyme extract

  • Talón-Argente, Emmanuelle
  • Trifkovic, Kata T.
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The release kinetics of thyme extract polyphenols (TE) from chitosan (CH), pea starch (S) and CH:S blend films in different solvents was evaluated, as well as their antioxidant activity in each release media. Pure starch films showed the fastest delivery rate and the highest delivery ratio of polyphenols, although the corresponding release media exhibited the lowest antioxidant capacity. TE provided CH based films with remarkable antioxidant activity, despite the lower polyphenol release obtained in all solvents, due to the strong polyphenols-chitosan interactions. The maximum amount of polyphenols delivered was found in the acetic acid solution, due to the high solubility of CH. The incorporation of tannic acid (TA) into CH films promoted cross-linking effect, which delays the TE release rate in water and ethanol aqueous solutions, except for CH:S:TA films. Thus, the polarity of the solvents and the polyphenols-matrix interactions markedly affected the polyphenol release and the antioxidant activity of the films., The authors acknowledge the financial support provided by the Spanish Ministerio de Economía y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talón thanks Universitat Politècnica València for a FPI Grant (99/2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(vinyl alcohol)-based materials encapsulating carvacrol obtained by solvent casting and electrospinning

  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Tampau, Alina
[EN] Carvacrol has been encapsulated in polyvinyl alcohol (PVA) matrices by electrospinning and casting. Aqueous solutions containing 15% PVA and 15% carvacrol with respect to polymer have been used, containing or not Tween 85 at 0.3 g/100 g carvacrol. Electrospun mats exhibited beads and thin fibres which became thinner and interrupted when carvacrol was present and retained up to 83% of this compound. The encapsulation efficiency in the electrospun mats decreased in the presence of surfactant, reaching values similar to those of casting (75-77%). The electrospun, surfactant free material was practically amorphous with 40% of the total carvacrol non-thermally releasable. In contrast, when surfactant was present and in cast material, with 40% crystallinity, the strongly bonded carvacrol ratio decreased. Specific PVA - phenolic hydroxyl interactions played an important role in the degree of carvacrol retention in the matrices, which depended on surfactant's presence and processing method, The authors thank the Ministerio de Economia y Competitividad (MINECO) of Spain, for the financial support provided for this study as part of the project AGL2016-76699-R. The author A. Tampau also thanks MINECO for the pre-doctoral research grant #BES-2014068100
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isolation and characterisation of microcrystalline cellulose and cellulose nanocrystals from coffee husk and comparative study with rice husk

  • Collazo-Bigliardi, Sofía
  • Ortega-Toro, Rodrigo
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cellulosic material from coffee husk has not been previously studied despite being a potential source of reinforcing agents for different applications. This material has been extracted and characterised from coffee husk, in parallel with previously studied rice husk. Samples have been analysed as to their ability to obtain cellulosic fibres and cellulose nanocrystals (CNC) by applying alkali and bleaching treatments and final sulphuric acid hydrolysis. Microstructural changes were analysed after treatments, and the size and aspect ratio of CNCs were determined. Crystallinity and thermal stability of both materials progressed in line with the enrichment in cellulosic compounds. The CNC aspect ratio was higher than 10, which confers good reinforcing properties. These were tested in thermoplastic starch films, whose elastic modulus increased by 186 and 121% when 1 wt% of CNCs from rice and coffee husks, respectively, was incorporated into the matrix. Coffee husk represents an interesting source of cellulosic reinforcing materials., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Authors also thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Edible coatings controlling mass loss and Penicillium roqueforti growth during cheese ripening

  • Ordóñez, Ramón
  • Contreras Monzón, Carolina Ivonne|||0000-0003-3377-4531
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The application of edible coatings carrying antifungal compounds on cheese was studied to reduce mass losses and control the fungal growth on the cheese surface during ripening. The effectiveness of 8 biopolymers and Aloe vera gel (AV) at controlling mass loss was analysed during the early stage of maturation, with and without lipids (Oleic acid and oleic acid-beeswax blend) and antifungal compounds (potassium sorbate (PS)), gallic tannin (GT) and Aloe vera gel. The gellan gum with both PS and GT exhibited the greatest efficacy at controlling the cheese water loss during the ripening period. The AV gel and its blend with gellan gum did not exert a good water vapour barrier capacity, although it did exhibit antifungal action against Penicillium roqueforti. The coating of gellan with PS resulted in an 84% inhibition of mycelial growth and could prevent fungal growth during cheese ripening, while controlling the cheese mass loss., The authors thank the financial support from the Ministerio de Economia y Competitividad (MINECO) of Spain, through the project AGL2016-76699-R. Author Ram.on Ordonez thanks the Honduras 2020 grant program for the received support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cherry tomato and Persimmon kaki conservation with a natural and biodegradable film

  • Verdeguer Sancho, Mercedes María|||0000-0002-8273-2576
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Castell-Zeising, Vicente|||0000-0002-4747-1024
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Llorens Molina, Juan Antonio
[EN] The chemical composition of Essential Oils Satureja montana and Mentha longifolia was determined, and their activity against important phytopathogenic and post-harvest fungi was studied, to evaluate their potential as natural food preservatives. The major compounds were carvacrol (24.0%), ¿-terpinene (15.9%) and p-cymene (14.2%) in S. montana, and piperitenone oxide (52.7%) and piperitone oxide (23.5%) in M. longifolia. EOs were tested in vitro on Alternaria alternata, Botryotinia fuckeliana, Curvularia hawaiiensis, Fusarium equiseti, F. oxysporum lycopersici, Rhizoctonia solani and Verticillium dahliae. S. montana demonstrated excellent results. At 300 ¿g mL¿1 the growth of all fungi was inhibited with 100% mycelial growth inhibition (MGI), except for B. fuckeliana (92%). M. longifolia was less effective, and its best result was against Verticillium dahliae (100% MGI) at 400 and 300 ¿g mL¿1. S. montana EO was selected for in vivo antifungal tests in Cherry tomatoes and kaki ¿Persimmon¿ against A. alternata. The S. montana EO biofilm reduced post-harvest fungi development. In tomato, it inhibited up to 90% after 20 days. Necrosis did not occur for 2 months in the persimmon fruits. S. montana EO is an effective non-toxic preservative that can be considered to develop a botanical and enviro-friendly low-risk biofungicide., This study has been financed by Generalitat Valenciana, Agencia Estatal de Investigación materiales biodegradables multicapa de alta barrera para el envasado activo de alimentos . (AGL2016-76699-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable Antimicrobial Films for Food Packaging: Effect of Antimicrobials on Degradation

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The environmental problem generated by the massive consumption of plastics makes necessary the developing of biodegradable antimicrobial materials that can extend food shelf-life without having a negative impact on the environment. The current situation regarding the availability of biodegradable food packaging materials has been analysed, as well as different studies where antimicrobial compounds have been incorporated into the polymer matrix to control the growth of pathogenic or spoilage bacteria. Thus, the antimicrobial activity of active films based on different biodegradable polymers and antimicrobial compounds has been discussed. Likewise, relevant information on biodegradation studies carried out with different biopolymers in different environments (compost, soil, aquatic), and the effect of some antimicrobials on this behavior, are reviewed. In most of the studies, no relevant effect of the incorporated antimicrobials on the degradation of the polymer were observed, but some antimicrobials can delay the process. The changes in biodegradation pattern due to the presence of the antimicrobial are attributed to its influence on the microorganism population responsible for the process. More studies are required to know the specific influence of the antimicrobial compounds on the biodegradation behavior of polymers in different environments. No studies have been carried out or marine media to this end., This research was funded by Ministerio de Ciencia e Innovacion of Spain through the Project AGL2016-76699-R, PID2019-105207RB-I00, and the predoctoral research grant #BES-2017-082040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of carvacrol in the properties of films based on poly (vinyl alcohol) with different molecular characteristics

  • Andrade, J.
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Poly (vinyl alcohol) (PVA) is a hydrophilic linear polymer obtained from the controlled hydrolysis of poly (vinyl acetate) (PVAc). The molecular weight (Mw) and degree of hydrolysis (DH) of PVA are considered relevant in both the functionality of the polymer and its capacity for film formation. This study analysed the influence of the Mw and DH of PVA on both the film's ability to incorporate carvacrol (CA), for the purposes of obtaining active films for food packaging application, as well as on the film microstructure, thermal behaviour and its functional properties as packaging material. CA was incorporated at 5 and 10 g/100 g polymer by emulsification in the polymer-water solutions, while the films were obtained by casting. The higher Mw polymer provided films with a better mechanical performance but less CA retention and a more heterogeneous structure. In contrast, low Mw, partially acetylated PVA gave rise to homogenous films with a higher CA content that increased the mechanical resistance and stretchability of the films. The melting temperature of this polymer with acetyl groups was lower than the degradation temperature, which makes thermoprocessing feasible., The authors would like to thank the financial support from the Ministerio de Economia y Competitividad (MINECO) of Spain, through the project AGL2016-76699-R. Author Johana Andrade thanks the Departamento de Narino-Colombia y la Fundacion CEIBA for the doctoral grant. The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antifungal and functional properties of starch-gellan films containing thyme (Thymus zygis) essential oil

  • Sapper, Mayra Ileana
  • Wilcaso, Paola
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Films based on starch-gellan blends at 9:1 and 8:2 ratios containing emulsified or lecithin encapsulated thyme (Thymus zygis) essential oil (EO) (0.25 or 0.5 g/g polymer), were obtained by casting method and characterized as to their structural, functional (mechanical, barrier and optical) and in vitro antifungal properties against Alternaria alternata (AA) and Botryotinia fuckeliana (BF). The EO retention during the film formation was also quantified. Lecithin encapsulation of the EO allowed for greater oil retention (45-55%), which enhanced the antifungal activity of the films, which were more effective against BF than AA. All films exhibited high oxygen barrier capacity, while lecithin improved the films water barrier properties and gloss, conferring them with a slightly brownish color. Lecithin also reduced the film stiffness and resistance to break and extensibility. Of the studied formulations, 8:2 S:G films with lecithin-encapsulated EO were very effective at controlling fungal growth, while exhibiting adequate functional properties as packaging/coating materials., The authors acknowledge the financial support for this study from the Ministerio de Economia y Competitividad (MINECO) of Spain, through the project AGL2016-76699-R. Mayra Sapper thanks the Conselleria de Educacion, Investigacion, Cultura y Deporte de la Comunitat Valenciana for the Santiago Grisolia grant GRISOLIA/2015/001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the potential synergistic antibacterial activity of essential oil components using the thiazolyl blue tetrazolium bromide (MTT) assay

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The thiazolyl blue tetrazolium bromide (MTT) assay was used to study the potential interactions between several active compounds from plant essential oils (carvacrol, eugenol, cinnamaldehyde, thymol and eucalyptol) when used as antibacterial agents against Escherichia coli and Listeria innocua. The minimum inhibitory concentration (MIC) of each active compound and the fractional inhibitory concentration (FIC) index for the binary combinations of essential oil compounds were determined. According to FIC index values, some of the compound binary combinations showed an additive effect, but others, such as carvacrol-eugenol and carvacrol-cinnamaldehyde exhibited a synergistic effect against L. innocua and E. coli, which was affected by the compound ratios. Some eugenol-cinnamaldehyde ratios exhibit an antagonistic effect against E. coli, but a synergistic effect against L. innocua. The most remarkable synergistic effect was observed for carvacrol-cinnamaldehyde blends for both E. colt and L. innocua, but using different compound ratios (1:0.1 and 0.5:4 respectively for each bacteria)., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Eugenol incorporation into thermoprocessed starch films using different encapsulating materials

  • Talón, Emma
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The effect of the incorporation of eugenol on the mechanical, barrier and antioxidant properties of compression moulded corn starch films was studied as well as the release kinetics. Free or spray-dried encapsulated eugenol, using whey protein or lecithin as wall materials and maltodextrin as drying coadjuvant and oleic acid (OA) as a carrying agent, was used. Thermo-processing of the films caused significant eugenol losses (80-65%), which were minimised when microcapsules contained OA. In the films with free eugenol, the compound retention was enhanced through its complexation with starch. Eugenol microcapsules provoked a heterogeneous microstructure in the film matrices, which became less resistant and stretchable, with lower water sorption capacity and improved barrier properties. Encapsulates promoted a faster eugenol release and a greater release ratio at equilibrium, especially when they contained more water-soluble components. An acid medium promoted the release ratio, associated with the progressive partial hydrolysis of the starch matrix., The authors acknowledge the financial support provided by the Spanish Ministerio de Educacion y Ciencia (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talon thanks the Universitat Politecnica Valencia (UPV) for a FPI Grant (99/2011). The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical composition of essential oils of three Mentha species and their antifungal activity against selected phytopathogenic and post-harvest fungi

  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Sempere Ferre, Francisca
  • Santamarina Siurana, Mª Cristina|||0000-0002-5816-3115
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Llorens Molina, Juan Antonio
  • Giménez Santamarina, Silvia
[EN] The postharvest life of most fruit, vegetables and cereals is limited by fungal proliferation. The chemical composition of Mentha piperita, M. spicata and M. suaveolens essential oils (EO), and the antifungal activity against four pathogenic and post-harvest fungi isolated from food, were herein investigated to evaluate their potential as natural food preservatives. The EO were obtained by hydrodistillation of aerial parts leaves, stems and inflorescences (except for peppermint oil, which was purchased in a specialized store) and submitted to GC-MS and GC-FID analysis. Regarding the EO composition, carvone (41.1%) and limonene (14.1%) were the major compounds in M. spicata, menthol (47.0%) and menthone (23.1%), as well as other menthol derivatives (neomenthol -3.6%- and menthofurane -3.7%-) in M. piperita, and piperitone oxide (40.2%) and piperitenone oxide (31.4%) in M. suaveolens. Botryotinia fuckeliana was the most sensitive fungus. The three studied EO inhibited growth by 92¿100%. The highest dose of M. suaveolens EO, 400 ¿g/mL, produced 100% MGI in all the studied fungi, except Fusarium oxysporum with 94.21%. The M. suaveolens EO can be considered to develop a low-risk enviro-friendly botanical biofungicide., The authors also thank the Spanish Type Culture Collection (CECT) for providing the molecular strain identification equipment. This study has been financed by MINECO, Ministerio de Economía y competitividad `Materiales biodegradables multicapa de alta barrera para el envasado activo de alimentos¿ (AGL2016-76699-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Obtaining antimicrobial bilayer starch and polyester-blend films with carvacrol

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayer films using polyester blends (P) and starch (S) were obtained and characterized, incorporating carvacrol as active compound. Carvacrol was incorporated by spraying it between melt blended and compression moulded sheets or through its incorporation into the chloroform P solution used to obtain P cast films. Different PLA-PHBV ratios (75:25 and 65:35) were tested, with and without 15¿wt% of PEG1000, whereas the 75:25 ratio with PEG was only used for cast sheets, based on its better overall properties. Mono and bilayers were characterized as to their tensile and water vapour barrier properties and thermal behaviour. Release kinetics of carvacrol in different food simulants and in in vitro antibacterial activity against Listeria innocua and Escherichia coli were also analysed. Incorporating carvacrol by spraying it between the polyester and starch sheets was not effective at retaining the compound in the bilayers. However, the incorporation of carvacrol into cast P films, and the subsequent formation of bilayers with the S sheets, was highly effective at providing practically total carvacrol retention. These active bilayers exhibited highly improved tensile and water vapour barrier capacity with respect to the S monolayer (87% reduction in WVP, 840% increase in elastic modulus) and inhibited the growth of L. innocua and E. coli from both P or S contact sides of bilayers, depending on the internal diffusion of carvacrol through the bilayer and its adequate release of the compound into the culture medium.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Use of ferulic and cinnamic acids to obtain active films based on starch and PLA for food packaging applications

  • Ordóñez Lagos, Ramón Alberto
[ES] Los residuos de envases alimentarios contribuyen en gran medida a la actual crisis medioambiental provocada por los plásticos. Por ello, la industria alimentaria necesita soluciones de envasado más sostenibles y respetuosas con el medio ambiente, utilizando materiales biodegradables y activos para alargar la vida útil de los alimentos. En este sentido, la presente tesis doctoral tiene como objetivo la obtención de películas activas a base de almidón y PLA mediante la incorporación de ácidos ferúlico o cinámico como compuestos activos, con el fin de desarrollar laminados multicapa que cumplan con los requisitos de envasado de alimentos, con capacidad antibacteriana para alargar la vida útil del producto. La incorporación de los ácidos ferúlico y cinámico a las matrices de almidón de yuca mediante el proceso de mezclado en fundido, al 1 y 2%, promovió la plastificación de la película, probablemente debido a la hidrólisis parcial del polímero durante el proceso de mezclado. Los análisis de la actividad antibacteriana de las películas frente a Escherichia coli y Listeria innocua, en medio de cultivo, revelaron que las películas con ácido cinámico eran más eficaces para inhibir el crecimiento bacteriano, y que Listeria innocua era más sensible a ambos ácidos que E. coli. Cuando los ácidos se incorporaron a las matrices de PLA al 1 y 2% mediante mezclado en fundido, las propiedades funcionales de las películas no se vieron muy afectadas. Sin embargo, los ensayos antimicrobianos in vitro con L. innocua y E. coli, no mostraron acción antibacteriana. Los estudios de liberación mostraron una liberación muy limitada de los ácidos desde la matriz de PLA debido al estado vítreo de la matriz polimérica y a su naturaleza hidrofóbica, que limitan el hinchamiento y la relajación del polímero en contacto con medios acuosos, como muchas matrices alimentarias. Por lo tanto, para promover la liberación del compuesto activo desde la matriz de PLA, se analizaron diferentes estrategias: 1) plastificar las películas termoprocesadas con PEG 1000, 2) aumentar la concentración de los compuestos en la película, 3) procesar las películas por casting y 4) anclar los compuestos activos a la superficie de la película. Sólo la incorporación superficial de ferúlico o cinámico en las películas de PLA dio lugar a una inhibición significativa del crecimiento bacteriano. La pulverización de las películas de PLA con soluciones etanólicas de ácido permitió la formación superficial de una capa sobre concentrada de compuestos activos en las películas, con formaciones cristalinas que dio lugar a una adecuada liberación de activos para inhibir el crecimiento bacteriano. Disoluciones de PLA-ácido, utilizando mezclas de acetato de etilo con DMSO o ácido acético glacial, fueron electrodepositadas en la superficie de las películas. Los sistemas con DMSO produjeron fibras con una elevada superficie específica que inhibieron significativamente el crecimiento bacteriano, mientras que los sistemas con ácido acético produjeron estructuras particuladas sin actividad antimicrobiana. Se consideró la incorporación superficial de los compuestos activos para obtener películas de tres capas PLA/almidón/PLA (PSP) con mejores propiedades funcionales y capacidad antimicrobiana. Las películas cargadas superficialmente, tanto por electrospinning como por pulverización, mostraron una eficaz inhibición del crecimiento de E. coli y L. innocua, siendo las películas recubiertas por electrospinning más eficaces que las pulverizadas. Por lo tanto, los laminados PSP, con incorporación superficial de ácidos ferúlico o cinámico, representan una buena alternativa para obtener materiales de envasado de alimentos activos, con capacidad para preservar la calidad de los alimentos y prolongar su vida útil. No obstante, son necesarios más estudios sobre aplicaciones específicas en alimentos reales para determinar la posible aplicación industrial y la viabilidad económica de estos materiales., [CA] Els residus d' envasos alimentaris contribueixen en gran mesura a l' actual crisi mediambiental provocada pels plàstics. Per això, la indústria alimentària necessita solucions d' envasament més sostenibles i respectuoses amb el medi ambient, utilitzant materials biodegradables i actius per allargar la vida útil dels aliments. En aquest sentit, aquesta tesi doctoral té com a objectiu l' obtenció de pel·lícules actives a base de midó i PLA mitjançant la incorporació d' àcids ferúlic o cinàmic com a compostos actius, per tal de desenvolupar laminats multicapa que compleixin amb els requisits d' envasament d' aliments, amb capacitat antibacteriana per allargar la vida útil del producte. La incorporació dels àcids ferúlic i cinàmic a les matrius de midó de iuca mitjançant el procés de mesclament en fos, a l'1 i 2% p/p, va promoure la plastificació de la pel·lícula, probablement a causa de la hidròlisi parcial del polímer durant el procés de barret. Les anàlisis de l'activitat antibacteriana de les pel·lícules enfront d'Escherichia coli i Listeria innocua, en medi de cultiu, van revelar que les pel·lícules amb àcid cinàmic eren més eficaces per inhibir el creixement bacterià, i que Listeria innocua era més sensible a tots dos àcids que E. coli. Quan els àcids van incorporar a les matrius de PLA a l'1 i al 2% mitjançant mesclament en fos, les propietats funcionals de les pel·lícules no es van veure gaire afectades. No obstant això, els assajos antimicrobians in vitro amb L. innocua i E. coli, no van mostrar acció antibacteriana. Els estudis d'alliberament van mostrar un alliberament molt limitat dels àcids ferúlic i cinàmic des de la matriu de PLA a causa de l'estat vitri de la matriu polimèrica i a la seva naturalesa hidrofòbica, que limiten l'hinxament i la relaxació del polímer en contacte amb mitjans aquosos, com moltes matrius alimentàries. Per tant, per promoure l' alliberament del compost actiu des de la matriu de PLA, es van analitzar diferents estratègies: 1) plastificar les pel·lícules termoprocessades amb PEG 1000, 2) augmentar la concentració dels compostos a la pel·lícula, 3) processar les pel·lícules per casting i 4) ancorar els compostos actius a la superfície de la pel·lícula. Només la incorporació superficial de ferúlic o cinàmic a les pel·lícules de PLA va donar lloc a una inhibició significativa del creixement bacterià. La polvorització de les pel·lícules de PLA amb solucions etanòliques d'àcid va permetre la formació superficial d'una capa sobreconcentrada de compostos actius a les pel·lícules, amb formacions cristal·lines, que va donar lloc a un adequat alliberament d'actius per inhibir el creixement bacterià. Dissolucions de PLA-àcid, utilitzant mescles d'acetat d'etil amb DMSO o àcid acètic glacial, van ser electrodepositades a la superfície de les pel·lícules. Els sistemes amb DMSO van produir fibres amb una elevada superfície específica que van inhibir significativament el creixement bacterià, mentre que els sistemes amb àcid acètic van produir estructures particulades sense activitat antimicrobiana. Es va considerar la incorporació superficial dels compostos actius per obtenir pel·lícules de tres capes PLA/midó/PLA (PSP) amb millors propietats funcionals i capacitat antimicrobiana. Les pel·lícules carregades superficialment, tant per electrospinning com per polvorització, van mostrar una eficaç inhibició del creixement d'E. coli i L. innocua, sent les pel·lícules recobertes per electrospinning més eficaços que les polvoritzades. Per tant, els laminats PSP, amb incorporació superficial d'àcids ferúlic o cinàmic, representen una bona alternativa per obtenir materials d'envasat d'aliments actius, amb capacitat per preservar la qualitat dels aliments i prolongar la seva vida útil. No obstant això, calen més estudis sobre aplicacions específiques en aliments reals per determinar la possible aplicació industrial i la viabilitat econòmica d' aquests materials., [EN] Food packaging waste is a major contributor to the current environmental crisis caused by conventional plastic. Therefore, the food industry needs more sustainable environmentally friendly packaging solutions, such as using biodegradable and active materials to extend the food shelf-life. In this sense, the present doctoral thesis aims to obtain active films based on starch and PLA by incorporating ferulic or cinnamic acids as active compounds, in order to develop multilayer assemblies useful to meet food packaging requirements, with antibacterial capacity to extend the product shelf life. The incorporation of ferulic and cinnamic acids into cassava starch matrices through melt-blending process, at 1 and 2% w/w, promoted the film plasticization, probably due to the partial hydrolysis of polymer during the melt-blending process. The analyses of the antibacterial activity of the films against E. coli and Listeria innocua strains, in culture medium, revealed that films with cinnamic acid were more effective at inhibiting the bacterial growth, and that L. innocua was more sensitive to both acids than E. coli. When the acids were incorporated into PLA matrices at 1 and 2% w/w by melt blending, the functional properties of the films were not greatly affected. However, the in vitro antimicrobial tests with L. innocua and E. coli, did not show antibacterial action. Release studies showed very limited release of the ferulic and cinnamic acids from the PLA matrix due to the glassy state of polymer matrix and its hydrophobic nature that limits the polymer swelling and relaxation in contact with aqueous media, such as many food matrices. Therefore, in order to promote the release of active compound from the PLA matrix, different strategies were analysed: 1) plasticizing the thermoprocessed films with PEG 1000, 2) increasing the concentration of the compounds in the film, 3) processing the films by casting and 4) anchoring the active compounds to the film surface. Only the surface incorporation of ferulic or cinnamic on PLA films gave rise to significant bacterial growth inhibition. Pulverization of PLA films with ferulic or cinnamic acid ethanol solutions allows the formation of an overconcentrated layer of active compounds on the films with crystalline formations that led to an adequate release of actives to inhibit the bacterial growth. PLA-acid solutions, using blends of ethyl acetate with dimethyl sulfoxide (DMSO) or glacial acetic acid, were electrospun on the film surface. DMSO systems produced fibre-structured mats with high specific surface that significantly inhibited bacterial growth, whereas acetic acid systems produce bead-based mats that not had antimicrobial activity. The surface incorporation of the active compounds was considered for obtaining three-layered films PLA/starch/PLA (PSP) with improved functional properties and antimicrobial capacity. Superficially loaded films by both electrospinning or pulverisation, showed effective growth inhibition of E. coli and L. innocua, electrospun films being more effective than pulverised, suggesting greater ability to release the active compounds. Therefore, PSP laminates, with surface incorporation of ferulic or cinnamic acids, represent a good alternative to obtain active food packaging materials with the capacity to preserve food quality and extend shelf life. Nonetheless, further studies on the material stability and specific applications in real foods are necessary to determine the possible industrial application and economic viability of these materials., The authors thank the Agencia Estatal de Investigación (Ministerio de Ciencia e Innovación, Spain) for the financial support through projects AGL2016-76699-R and PID2019-105207RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using lignocellulosic fractions of coffee husk to improve properties of compatibilised starch-PLA blend films

  • Collazo-Bigliardi, Sofía
  • Ortega-Toro, Rodrigo
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effectiveness of the incorporation of cellulosic reinforcing agents (cellulosic fibres: CF and cellulose nanocrystals: CNC) and antioxidant aqueous extract (AE) from coffee husk at improving the functional properties of compatibilised starch-PLA blend films was studied. Tensile and barrier properties, crystallization pattern and thermal behaviour were analysed in films containing 1 wt% of CF or CNC incorporated by two different methods or 5.8 wt% of antioxidant extract. The antioxidant properties of the films were also tested through their efficacy at preserving sunflower oil from oxidation. Of the cellulosic fractions, CNC directly blended with the starch phase were the most effective at reinforcing tensile properties of the material (148% and 45% increase in elastic modulus and tensile strength, respectively) and at reducing their water vapour and oxygen permeability (28% and 42% reduction, respectively). The AE did not improve the mechanical performance of the blend films, but conferred antioxidant capacity useful for food packaging applications., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. The authors also wish to thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of natural antioxidants from rice straw into renewable starch films

  • Menzel, Carolin
  • Vilaplana, Francisco
  • Diretto, Gianfranco
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] This study showed that rice straw waste is a valuable source for the extraction of water-soluble phenolic compounds that can be successfully incorporated into bioactive starch-based films. The major phenolic compounds in the extract were identified as ferulic, p-coumaric and protocatechuic acid using UHPLC-MS. Homogeneous films with antioxidant properties were produced by melt blending and compression molding and the changes in the physico-chemical properties were evaluated. The produced antioxidant starch films were slightly reddish-colored and exhibited good in-vitro antiradical scavenging activity against DPPH*. The addition of the antioxidant extract improved the oxygen barrier properties without negatively affecting the thermal and the water vapor barrier properties. However, antioxidant starch films turned more brittle with increasing amount of the antioxidant extract, which was probably due to interactions of phenolic compounds with the starch chains. The film forming process induced chain scission of starch molecules in all films, shown in a decrease in molecular weight of native starch from 9.1 x 10(6) Da to values as low as 1.0-3.5 x 10(6) Da. This study aids a circular economy by recycling rice straw for the production of bioactive food packaging., This work was supported by the Swedish Research Council Formas [2015-00550] and by the project AGL2016-76699-R from Spanish Ministerio de Educacion y Ciencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermoplastic cassava starch-chitosan bilayer films containing essential oils

  • Valencia-Sullca, Cristina Encarnación
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Starch-chitosan bilayer films, containing or not essential oils in the casted chitosan layer were obtained by thermo-compression. Bilayer films exhibited a good interfacial adhesion and better mechanical resistance than starch monolayers, although they were less stretchable and less transparent. Starchchitosan films were effective at controlling the bacterial growth in pork meat, but the thermal treatment applied to obtain the bilayers reduced their antimicrobial properties as compared to chitosan monolayers. The addition of essential oils did not promote any antimicrobial action in chitosan mono and bilayer films applied to pork meat. The final amount of essential oils in the films was very limited probably due to the losses occurred during film processing method. Other strategies to incorporate the essential oils into chitosan-based films should be used to improve their final retention in the film matrix and their effective release into the coated food. (C) 2017 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support provided by the Spanish Ministerio de Economia y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Author Cristina Valencia-Sullca thanks the Peruvian Grant National Program (PRONABEC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combination of poly(lactic) acid (PLA) and starch to obtain biodegradable materials for food packaging

  • Muller, Justine
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The massive use of synthetic plastics, in particular in the food packaging area, has a great environmental impact, and alternative more ecologic materials are being required. Poly(lactic) acid (PLA) and starch have been extensively studied as potential replacements for non-degradable petrochemical polymers on the basis of their availability, adequate food contact properties and competitive cost. Nevertheless, both polymers exhibit some drawbacks for packaging uses and need to be adapted to the food packaging requirements. Starch, in particular, is very water sensitive and its film properties are heavily dependent on the moisture content, exhibiting relatively low mechanical resistance. PLA films are very brittle and offer low resistance to oxygen permeation. Their combination as blend or multilayer films could provide properties that are more adequate for packaging purposes on the basis of their complementary characteristics. The main characteristics of PLA and starch in terms of not only the barrier and mechanical properties of their films but also of their combinations, by using blending or multilayer strategies, have been analysed, identifying components or processes that favour the polymer compatibility and the good performance of the combined materials. The properties of some blends/combinations have been discussed in comparison with those of pure polymer films., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Justine Muller thanks the Generalitat Valènciana for the Santiago Grisolía Grant (GRISOLIA/2014/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biodegradable Multilayer Films for Active Food Packaging, Based on Starch and Polyesters with Phenolic Acids

  • Hernández García, Eva
[ES] Se han desarrollado mediante termoprocesado películas multicapa biodegradables activas para el envasado de alimentos, combinando películas de almidón mejoradas y de una mezcla de poliésteres (PLA-PHBV), con diferentes ácidos fenólicos (ferúlico, p-cumárico y protocatecuico). En las películas almidón de yuca o de maíz se incorporaron gomas de origen microbiano (xantana y gelano) (10%) para mejorar sus propiedades funcionales. Las gomas mejoraron las propiedades mecánicas y de barrera al vapor de agua y al oxígeno de los films de almidón. Estos films se combinaron con films mezcla de PLA:PHBV en bicapas almidón-poliésteres por termocompresión. Las bicapas presentaron una alta capacidad barrera al oxígeno y al vapor de agua comparado con sus respectivas monocapas. La capa de poliéster contribuyó al refuerzo mecánico de la bicapa, aportando alta capacidad de barrera al vapor de agua, mientras que la capa de almidón aportó alta capacidad de barrera al oxígeno a la bicapa. La bicapa con almidón de yuca y goma gelano presentó la mejor adhesión entre capas, con propiedades funcionales adecuadas para el envasado de alimentos. Los ácidos ferúlico, p-cumárico y protocatecuico, con propiedades antimicrobianas y antioxidantes, se incorporaron (2%) en los films mezcla de PLA:PHBV para obtener films activos. Los ácidos fenólicos modificaron positivamente las propiedades de la mezcla de poliésteres, incrementando su módulo de elasticidad y resistencia a la fractura y su capacidad de barrera al vapor de agua y al oxígeno, al tiempo que aumentaron levemente la Tg del material. El ácido protocatecuico provocó los mayores efectos, afectando a la cristalización del PHBV. La liberación de estos compuestos en diferentes simulantes alimentarios (con polaridad alta e intermedia) fue muy limitada en cuanto a velocidad y cantidad liberada, lo que disminuyó la capacidad de las películas para inhibir de forma significativa el crecimiento de Listeria innocua inoculada en medio de cultivo. Estos films, con y sin compuestos activos, se desintegraron en condiciones de compostaje, sin efecto significativo de los ácidos fenólicos. Los films sin activos y con ácido ferúlico se biodegradaron completamente después de 20 días de compostaje, mientras que los films que contenían ácido p-cumárico y protocatecuico lo hicieron en 21 y 26 días, respectivamente. Por lo tanto, ninguno de los ácidos fenólicos incorporados inhibió el proceso de biodegradación, pero se retardó el proceso, dependiendo del grado de retención del compuesto en la matriz polimérica. Los films bicapa biodegradables constituidos por una capa de almidón-gelano y otra de PLA:PHBV, con y sin ácidos fenólicos, se caracterizaron en sus propiedades mecánicas y de barrera al vapor de agua y al oxígeno y se utilizaron para el envasado de carne de cerdo, evaluando su calidad durante el almacenamiento a 5 °C. La presencia de ácidos fenólicos disminuyó el módulo elástico y la tensión de fractura de las bicapas y mejoró su capacidad de barrera al vapor de agua y al oxígeno. Esto último, junto al efecto activo de los ácidos, contribuyó a mejorar la conservación de la carne durante el almacenamiento, reduciendo los niveles de oxidación lipídica, cambios de pH y pérdidas de peso de las muestras envasadas, así como el crecimiento microbiano, especialmente coliformes totales y bacterias ácido-lácticas. Los films bicapa biodegradables con ácidos fenólicos, a base de almidón y poliésteres, se muestran como una estrategia adecuada para obtener materiales de envasado activo, con propiedades funcionales próximas a las de algunos plásticos sintéticos comúnmente utilizados en el envasado de alimentos. Estos materiales pueden alargar la vida útil de los alimentos, mitigando el impacto ambiental de los envases plásticos ya que pueden ser compostados., [CA] S'han desenvolupat, mitjançant termoprocesat, pel·lícules multicapa biodegradables actives per a l'envasament d'aliments, combinant pel·lícules de midó millorades i d'una mescla de polièsters (PLA-PHBV), amb diferents àcids fenòlics (ferúlic, p-cumàric i protocatecuic). En les pel·lícules midó de iuca o de dacsa es van incorporar gomes d'origen microbià (xantana i gellan) (10%) per a millorar les seues propietats funcionals. Les gomes van millorar les propietats mecàniques i de barrera al vapor d'aigua i a l'oxigen dels films de midó. Aquests films es van combinar amb films mescla de PLA:PHBV en bicapes midó-polièsters per termocompresió. Les bicapes van presentar una alta capacitat barrera a l'oxigen i al vapor d'aigua comparat amb les respectives monocapes. La capa de polièster va contribuir al reforç mecànic de la bicapa, aportant alta capacitat de barrera al vapor d'aigua, mentre que la capa de midó va aportar alta capacitat de barrera a l'oxigen a la bicapa. La bicapa amb midó de iuca i goma gellan va presentar la millor adhesió entre capes, amb propietats funcionals adequades per a l'envasament d'aliments. Els àcids ferúlic, p-cumàric i protocatecuic, amb propietats antimicrobianes i antioxidants, es van incorporar (2%) en els films mescla de PLA:PHBV per a obtindre films actius. Els àcids fenòlics van modificar positivament les propietats de la mescla de polièsters, incrementant el seu mòdul d'elasticitat i resistència a la fractura i la seua capacitat de barrera al vapor d'aigua i a l'oxigen, al mateix temps que van augmentar lleument la Tg del material. L'àcid protocatecuic va provocar els majors efectes, afectant la cristal·lització del PHBV. L'alliberament d'aquests compostos en diferents simulants alimentaris (amb polaritat alta i intermèdia) va ser molt limitada en quant a velocitat i quantitat alliberada, la qual cosa va disminuir la capacitat de les pel·lícules per a inhibir de manera significativa el creixement de Listeria innocua inoculada en medi de cultiu. Aquests films, amb i sense compostos actius, es van desintegrar en condicions de compostatge, sense efecte significatiu dels àcids fenòlics. Els films sense actius i amb àcid ferúlic es biodegradaren completament després de 20 dies de compostatge, mentre que els films que contenien àcid p-cumàric i protocatecuic ho van fer en 21 i 26 dies, respectivament. Per tant, cap dels àcids fenòlics incorporats va inhibir el procés de biodegradació, però es va retardar el procés, depenent del grau de retenció del compost en la matriu polimèrica. Els films bicapa biodegradables constituïts per una capa de midó-gellan i una altra de PLA:PHBV, amb i sense àcids fenòlics es van caracteritzar en les seues propietats mecàniques i de barrera al vapor d'aigua i a l'oxigen i es van utilitzar per a l'envasament de carn de porc, avaluant la qualitat a llarg del emmagatzematge a 5 °C. La presència d'àcids fenòlics va disminuir el mòdul elàstic i la tensió de fractura de les bicapes i va millorar la seua capacitat de barrera al vapor d'aigua i a l'oxigen. Això últim, junt a l'efecte actiu dels àcids, va contribuir a millorar la conservació de la carn durant l'emmagatzematge, reduint els nivells d'oxidació lipídica, canvis de pH i pèrdues de pes de les mostres envasades, així com el creixement microbià, especialment coliformes totals i bacteris àcid-làctics. Els films bicapa biodegradables amb àcids fenòlics, a base de midó i polièsters, es mostren com una estratègia adequada per a obtindre materials d'envasament actiu, amb propietats funcionals pròximes a les d'alguns plàstics sintètics comunament utilitzats en l'envasament d'aliments. Aquests materials poden allargar la vida útil dels aliments, mitigant l'impacte ambiental dels envasos plàstics ja que poden ser compostats., [EN] Active biodegradable multilayer films have been developed by thermoprocessing for food packaging purposes, combining improved starch films and a blend of polyesters (PLA-PHBV), with different phenolic acids (ferulic, p-coumaric and protocatechuic). Into the cassava or maize starch films, gums of microbial origin (xanthan and gellan) were incorporated (10%) to improve their functional properties. The gums improved the mechanical and barrier properties to water vapor and oxygen of the starch films. These films were combined with PLA:PHBV blend films in starch-polyester bilayers by thermocompression. The bilayers exhibited high barrier capacity to oxygen and water vapor compared to their respective monolayers. The polyester layer contributes to the mechanical reinforcement of the bilayer, providing high water vapor barrier capacity, while the starch layer provided high oxygen barrier capacity to the bilayer. The bilayer with cassava starch and gellan gum showed the best interlayer adhesion, with adequate functional properties for food packaging applications. Ferulic, p-coumaric and protocatechuic acids, with antimicrobial and antioxidant properties, were incorporated (2%) in the PLA: PHBV blend films to obtain active films. Phenolic acids positively modified the properties of the polyester blend, increasing its elastic modulus and resistance to break and its barrier capacity to water vapor and oxygen, while slightly increasing the Tg of the material. Protocatechuic acid caused the greatest effects, affecting the crystallization of PHBV. The release of these compounds in different food simulants (with high and intermediate polarity) was very limited in terms of release rate and released amount, which reduced the ability of the films to significantly inhibit the growth of Listeria innocua inoculated in culture medium. These films, with and without active compounds, disintegrated under composting conditions, without significant effect of phenolic acids. Films without active compounds and with ferulic acid biodegraded completely after 20 days of composting, whereas films containing p-coumaric and protocatechuic acids did so in 21 and 26 days, respectively. Therefore, none of the incorporated phenolic acids inhibited the biodegradation process, but the process was delayed, depending on the degree of retention of the compound in the polymeric matrix. The biodegradable bilayer films with a layer of starch-gellan and another of PLA: PHBV, with and without phenolic acids, were characterized as to their mechanical properties and barrier capacity to water vapor and oxygen and were used for packaging of pork meat whose quality development was analysed throughout storage time at 5 °C. The presence of phenolic acids decreased the elastic modulus and resistance to break of the bilayers and improved their barrier capacity to water vapor and oxygen. The latter, together with the active effect of the acids, contributed to improving the preservation of the meat during storage, reducing the levels of lipid oxidation, changes in pH and weight losses of the packed samples, as well as microbial growth, especially total coliforms and lactic acid bacteria. Biodegradable bilayer films with phenolic acids, based on starch and polyesters, appeared as a suitable strategy to obtain active packaging materials, with functional properties close to those of some synthetic plastics commonly used in food packaging. These materials can extend the shelf-life of foods, mitigating the environmental impact of plastic packaging since they can be composted., The authors would like to thank the Ministerio de Ciencia e Innovación of Spain, for funding this study through the Project AGL2016-76699-R and PID2019-105207RB-I00, and the predoctoral research grant # BES-2017-082040
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Release kinetics and antimicrobial properties of carvacrol encapsulated in electrospun poly-(epsilon-caprolactone) nanofibres. Application in starch multilayer films

  • Tampau, Alina
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Electrospun poly-(epsilon-caprolactone) (PCL) fibre mats encapsulating Carvacrol (CA) were obtained with good encapsulation efficiency (85%) and CA load (11% in the fibre). These mats were effective at controlling the growth of Escherichia coli, when the surface density of CA loaded fibres was 1.2 or 1.8 mg/cm2, in line with the CA released into the culture medium that exceeded the MIC of the bacteria. However, they were not effective at controlling the growth of Listeria innocua, since a greater release of CA was necessary to achieve the MIC of this bacterium. It was not only the CA load in the fibres, but also its release capacity in the media that determined the antimicrobial effect. The fibre showed higher release rate and ratio in less polar simulants, D1 (50% ethanol) and D2 (isooctane) (representing fatty foodstuff), where practically the total amount of CA was released; whereas in more polar systems (simulants A (10% ethanol) and B (3% acetic acid)) a more limited CA delivery (60-75%) occurred, at a slower rate. The antimicrobial action of the active PCL mats was reproduced in multilayer starch films containing the CA-loaded electrospun PCL fibres between two starch sheets, with a slightly delayed response. In the multilayer films, a great reduction in the water vapour permeability was also observed with respect to that of starch films, without relevant changes in other functional properties of the films for packaging purposes., The authors thank the Ministerio de Economia y Competitividad (MINECO) of Spain, for the financial support for this study as a part of projects AGL2013-42989-R and AGL2016-76699-R. The author A. Tampau thanks MINECO for the pre-doctoral research grant # BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Thermoformed Bilayer Trays of Paper and Renewable Succinic Acid Derived Biopolyester Blends and Their Application to Preserve Fresh Pasta

  • Hernandez-Garcia, Eva
  • Zomeño, Pedro
  • Viscusi, Gianluca
  • Malvano, Francesca
  • Gorrasi, Giuliana
  • Pacheco-Romeralo, Marta|||0000-0002-7132-2344
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present study reports on the development by thermoforming of highly sustainable trays based on a bilayer structure composed of paper substrate and a film made of a blend of partially bio-based poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). The incorporation of the renewable succinic acid derived biopolyester blend film slightly improved the thermal resistance and tensile strength of paper, whereas its flexural ductility and puncture resistance were notably enhanced. Furthermore, in terms of barrier properties, the incorporation of this biopolymer blend film reduced the water and aroma vapor permeances of paper by two orders of magnitude, while it endowed the paper structure with intermediate oxygen barrier properties. The resultant thermoformed bilayer trays were, thereafter, originally applied to preserve non-thermally treated Italian artisanal fresh pasta, "fusilli calabresi" type, which was stored under refrigeration conditions for 3 weeks. Shelf-life evaluation showed that the application of the PBS-PBSA film on the paper substrate delayed color changes and mold growth for 1 week, as well as reduced drying of fresh pasta, resulting in acceptable physicochemical quality parameters within 9 days of storage. Lastly, overall migration studies performed with two food simulants demonstrated that the newly developed paper/PBS-PBSA trays are safe since these successfully comply with current legislation on plastic materials and articles intended to come into contact with food., This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2021-128749OB-C33, and the Valencian Innovation Agency (AVI) through the TERMOFIB project (INNVA1/2020/46).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Encapsulation of eugenol by spray-drying using whey protein isolate or lecithin: Release kinetics, antioxidant and antimicrobial properties

  • Talón-Argente, Emmanuelle
  • Lampi, Anna-Maija
  • Jouppila, Kirsi
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The encapsulation of eugenol (E) by spray-drying using whey protein (WP) or soy lecithin (LE) and maltodextrin in combination with oleic acid (OA) and chitosan (CH) was analysed in order to obtain antioxidant and antimicrobial powders for food applications. Formulations with only WP or LE showed higher encapsulation efficiencies (EE) (95¿98%) and antibacterial effect against E. coli and L. innocua due to their greater E load. Incorporation of OA or CH promoted lower EE, which negatively affected the antimicrobial and antioxidant activities of the powders. Furthermore, the addition of CH implied less thermal protection against the E losses. The eugenol release was not notably affected by pH or polarity of the food simulant, but the release rate significantly decreased when incorporating OA and CH. The E-LE formulations better retained the eugenol than E-WP powders when heated above 200¿°C, this being relevant for the powder inclusion in thermally treated products., The authors acknowledge the financial support provided by the Spanish Ministerio de Educacion y Ciencia (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talon thanks the Universitat Politecnica Valencia (UPV) for a FPI Grant (99/2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quality and Shelf-Life Stability of Pork Meat Fillets Packaged in Multilayer Polylactide Films

  • Hernandez-Garcia, Eva
  • Vargas, Maria|||0000-0001-6024-0952
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, the effectiveness of a multilayer film of polylactide (PLA), fully bio-based and compostable, was ascertained to develop a novel sustainable packaging solution for the preservation of fresh pork meat. To this end, the multilayer PLA films were first characterized in terms of their thermal characteristics, structure, mechanical performance, permeance to water and aroma vapors and oxygen, and optical properties and, for the first time, compared with two commercial high-barrier multilayer packaging films. Thereafter, the multilayers were thermosealed to package fillets of fresh pork meat and the physicochemical changes, lipid oxidation levels, and microbiological counts were monitored in the food samples during storage under refrigeration conditions. Results showed that the meat fillets packaged in PLA developed a redder color and showed certain indications of dehydration and oxidation, being more noticeably after 11 days of storage, due to the higher water vapor and oxygen permeance values of the biopolymer multilayer. However, the pH changes and bacterial growth in the cold-stored fresh pork meat samples were minimal and very similar in the three tested multilayer films, successfully accomplishing the requirements of the food quality and safety standards at the end of storage., This research was funded by the Spanish Ministry of Science and Innovation (MICI), grant number PID2019-105207RB-I00. E.H.-G. and S.T.-G. acknowledge MICI for her predoctoral research grant (BES2017-082040) and his Ramón y Cajal contract (RYC2019-027784-I). The authors are also grateful to the Packaging Technologies Department of AINIA for the technical support provided during the determination of the multilayer structures. Derprosa is also acknowledged for gently providing the multilayer PLA film.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of tannins to enhance the functional properties of protein based films.

  • Cano, A.
  • Andrés, M.
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] In this study, three tannins from different sources have been used (from white peel grape (W), red peel grape (R) and from oak bark (O)) to obtain active films based on proteins (caseinate and gelatin) on the basis of their natural origin and potential antioxidant and antimicrobial activity. Films were obtained in two different ways: monolayer films, by homogeneously blending the tannins with the proteins and bilayer films, by coating the previously obtained protein film with the different tannin solutions. The microstructural, physicochemical characterisation as well as the antioxidant and antimicrobial activities of the films were analysed. The interactions developed between tannins and protein matrices determined the physico-chemical properties of the films. Significant changes were only observed in tannin-caseinate films, due to the establishment of hydrogen bonding and hydrophobic interactions, especially when using the tannin with the greatest phenolic content (W). Thus, the W tannin caseinate based films turned thicker, with markedly improved (p < 0.05) water solubility and WVP values and became mechanically stiffer and less stretchable. All of the films incorporating tannins exhibited remarkable antioxidant and antimicrobial activities against E.Coli and L. innocua, being the bilayer films containing W tannin the ones exhibiting the best antioxidant and antimicrobial activity against both bacteria (5 log of reduction), due to the greater availability of the active component when incorporated as a bilayer., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad through the project AGL2016-76699-R.