Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

  • Gabirondo, Elena
  • Sangroniz, Ainara
  • Etxeberria, Agustin
  • Sardon, Haritz
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Poly(hydroxy acids) have been gaining increasing attention in the search for novel sustainable materials to replace petrochemical polymers in packaging applications. Poly(hydroxy acids) are polyesters that are obtained using hydroxy acids as the starting materials, which are derived from renewable resources and biowaste. These biopolymers have attracted a lot of attention since some of them will be in the near future competitive in price to polyolefins, show excellent mechanical and barrier properties, and can be potentially recycled by physical and chemical routes. Most of the current poly(hydroxy acids) are mainly prepared by ring-opening polymerization (ROP) of cyclic monomers derived from hydroxy acids. However, their direct polymerization has received much less attention, while one of the advantages of hydroxy acids resides in the presence of an electrophile and a nucleophile in a single molecule that makes them ideal A-B type monomers for self-condensation. This review focuses on the preparation of poly(hydroxy acids) by the self-condensation polymerization of hydroxy acids. Moreover, their end-of-life options are also evaluated considering not only their biodegradability but also their potential to be chemically recycled, The authors thank the European Commission (EC) for financial support through the project SUSPOL-EJDH2020-ITN-2014-642671 and the Spanish Ministry of Science and Innovation (MICI) through the projects RTI2018-097249-B-C21, MAT2017-83373-R, and MAT-2016-78527-P. S. Torres-Giner also acknowledges MICI for his Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) and the financial support received during his stay at the Institute for Polymer Materials (POLYMAT)
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Bio-based non-isocyanate poly(hydroxy urethane)s (PHU) derived from vanillin and CO2

  • Fanjul Mosteirin, Marcos Noé
  • Polo da Fonseca, Lucas
  • Dove, Andrew
  • Sardon Muguruza, Haritz
As an alternative to the use of hazardous phosgene-based isocyanates for polyurethane preparation, non-isocyanate poly(hydroxy urethanes) (PHU) based on 5-membered cyclic carbonates have been developed. However, to date, most aromatic PHUs are oil-based or based on toxic precursors such as bisphenol-A. In this work, bio-based non-isocyanate poly(hydroxy urethanes) (PHUs) prepared from vanillin are reported for the first time. First, three different vanillin-derived bis-cyclic carbonates were synthesized. Subsequently, each monomer was reacted with two different bis-amines to yield six different PHUs, which were characterized in depth by 1H and 13C NMR spectroscopy, FTIR, SEC and DSC. PHUs based on vanillic acid were found to exhibit thermal properties superior to bisphenol A-based PHUs, with a Tg of around 66 °C. It is envisioned that vanillin-based PHUs could potentially be a safer alternative to harmful bisphenol A-based PHUs and provide a useful strategy for CO2 revalorization, especially considering that vanillin is an abundant byproduct of Kraft lignin production., The authors acknowledge financial support from the European Commission through SUSPOL-EJD 642671 project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 101034379. The authors acknowledge grant TED2021-129852B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Non-Isocyanate Polyurethane Soft Nanoparticles Obtained by Surfactant-Assisted Interfacial Polymerization

  • Bossion, Amaury
  • Jones, Gavin O.
  • Taton, Daniel
  • Mecerreyes Molero, David
  • Hedrick, James J.
  • Zhan, Yuin Ong
  • Yi, Yan Yang
  • Sardon Muguruza, Haritz
Polyurethanes (PUs) are considered ideal candidates for drug delivery applications due to their easy synthesis, excellent mechanical properties, and biodegradability. Unfortunately, methods for preparing well-defined PU nanoparticles required miniemulsion polymerization techniques with a nontrivial control of the polymerization conditions due to the inherent incompatibility of isocyanate-containing monomers and water. In this work, we report the preparation of soft PU nanoparticles in a one-pot process using interfacial polymerization that employs a non-isocyanate polymerization route that minimizes side reactions with water. Activated pentafluorophenyl dicarbonates were polymerized with diamines and/or triamines by interfacial polymerization in the presence of an anionic emulsifier, which afforded non-isocyanate polyurethane (NIPU) nanoparticles with sizes in the range of 200–300 nm. Notably, 5 wt % of emulsifier was required in combination with a trifunctional amine to achieve stable PU dispersions and avoid particle aggregation. The versatility of this polymerization process allows for incorporation of functional groups into the PU nanoparticles, such as carboxylic acids, which can encapsulate the chemotherapeutic doxorubicin through ionic interactions. Altogether, this waterborne synthetic method for functionalized NIPU soft nanoparticles holds great promise for the preparation of drug delivery nanocarriers., The authors thank the European Commission for their financial support through the project SUSPOL-EJD 642671 and the Gobierno Vasco/Eusko Jaurlaritza (IT 999-16). Haritz Sardon gratefully acknowledges financial support from MINECO through project SUSPOL and FDI 16507. Yi Yan Yang gratefully acknowledges financial support from the Institute of Bioengineering and Nanotechnology (Biomedical Research Council and Joint Council Office, Agency for Science, Technology and Research, Singapore).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Unexpected Synthesis of Segmented Poly(hydroxyurea−urethane)s from Dicyclic Carbonates and Diamines by Organocatalysis

  • Bossion, Amaury
  • Hernández Aguirresarobe, Roberto
  • Irusta Maritxalar, María Lourdes
  • Taton, Daniel
  • Cramail, Henri
  • Grau, Etienne
  • Mecerreyes Molero, David
  • Su, Cui
  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Sardon Muguruza, Haritz
A complete study of the effect of different organocatalysts on the step-growth polyaddition of a five-membered dicyclic carbonate, namely diglycerol dicarbonate, with a poly(ethylene glycol)-based diamine in bulk at 120 °C was first carried out. The reaction was found to be dramatically catalyst-dependent, higher rates being observed in the presence of strong bases, such as phosphazenes (t-Bu-P4 or P4) and 5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). Unexpectedly, the as-formed urethane linkages entirely vanished with time, as evidenced by FTIR and 13C NMR spectroscopies, while signals due to urea bond formation progressively appeared. An advantage of the chemical transformation occurring from urethane to urea linkages was further taken by optimizing the polymerization conditions to access a range of poly(hydroxyurea−urethane)s (PHUUs) with precise urethane to urea ratio in a one-pot process. Characterization of the corresponding polymers by rheological measurements showed that the storage modulus reached a plateau at high temperatures and at high urea contents. The application temperature range of poly(hydroxyurea−urethane)s could thus be increased from 30 to 140 °C, as for regular polyurethanes. Furthermore, SAXS and phase-contrast microscopy images demonstrated that increasing the urea content improved the phase separation between soft and hard segments of these PHUUs. Altogether, this novel, straightforward, efficient, and environmentally friendly strategy enables the access to non-isocyanate poly(urea−urethane)s with tunable urethane-to-urea ratio from five-membered dicyclic carbonates following an organocatalytic pathway, The authors thank the European Commission for its financial support through the projects SUSPOL-EJD 642671, Renaissance-ITN 289347, and OrgBIO-ITN 607896. Haritz Sardon gratefully acknowledges financial support from MINECO through project SUSPOL and FDI 16507. A. J. Müller, G. Liu, and H. Sardon also acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). G. Liu is grateful to the support from the Youth Innovation Promotion Association of CAS (2015026).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Enantioselective Ring-Opening Polymerization of rac-Lactide Dictated by Densely Substituted Aminoacids

  • Sánchez Sánchez, Ana
  • Rivilla de la Cruz, Iván
  • Agirre, Maddalen
  • Basterrechea Gorostiza, Andere
  • Etxeberria Lizarraga, Agustín
  • Veloso Fernández, Antonio
  • Sardon Muguruza, Haritz
  • Mecerreyes Molero, David
  • Cossío Mora, Fernando Pedro
Organocatalysis is becoming an important tool in polymer science because of its versatility and specificity. To date a limited number of organic catalysts have demonstrated the ability to promote stereocontrolled polymerizations. In this work we report one of the first examples of chirality transfer from a catalyst to a polymer in the organocatalyzed ring-opening polymerization (ROP) of rac-lactide (rac-LA). We have polymerized rac-LA using the diastereomeric densely substituted amino acids (2S,3R,4S,5S)-1-methyl-4-nitro-3,5-diphenylpyrrolidine- 2-carboxylic acid (endo-6) and (2S,3S,4R,5S)-1-methyl-4- nitro-3,5-diphenylpyrrolidine-2-carboxylic acid (exo-6), combined with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a cocatalyst. Both diastereoisomers not only showed the ability to synthesize enriched isotactic polylactide with a Pm higher than 0.90 at room temperature but also were able to preferentially promote the polymerization of one of the isomers (L or D) with respect to the other. Thus, exo-6 preferentially polymerized Llactide, whereas endo-6 preferred D-lactide as the substrate. Density functional theory calculations were conducted to investigate the origins of this unique stereocontrol in the polymerization, providing mechanistic insight and explaining why the chirality of the catalyst is able to define the stereochemistry of the monomer insertion., Financial support of this research by the MINECO (CTQ2016-80375-P, Consolider CTQ2016-81797-REDC, SUSPOL, and FDI 16507), the Gobierno Vasco/Eusko Jaurlaritza (Grants IT673-13 and IT618-13), the University of the Basque Country UPV/EHU (UFI 11/22 QOSYC), and the European Commission (SUPSOL-EJD 642671) is gratefully acknowledged. A.S.-S. is thankful for the Postdoctoral Funding for Doctoral Research Staff Improvement Grant from the Basque Government.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Opportunities for organocatalysis in polymer synthesis via step-growth methods

  • Bossion, Amaury
  • Heifferon, Katherine V.
  • Meabe Iturbe, Leire
  • Zivic, Nicholas
  • Taton, Daniel
  • Hedrick, James
  • Long, Timothy E.
  • Sardon Muguruza, Haritz
Organocatalysis has emerged as an invaluable tool for polymer synthesis and has already demonstrated versatility for replacing organometallic catalysts in many polymerization reactions. The overall ease of removal and lower toxicity of organocatalysts relative to their common metal counterparts has also nurtured development especially in chain growth polymerizations to achieve precision macromolecular architectures for application in the biomedical space. The application of organocatalysts in step-growth polymerizations of polymers, including polyesters, polycarbonates, and polyurethanes, has garnered fewer studies in spite of the large array of benefits that could be achieved. Step-growth polymers account for nearly 20 wt. % of the Word Plastic Production and play a vital role in many technologies as engineering plastics and high performance polymeric materials with outstanding thermomechanical performance. Step-growth polymerizations are achieved using monomers with a diversity of chemical functionality. Consequently, a vast array of polymeric structures are attainable and will impact diverse applications in energy, aerospace, medicine, transportation, and construction. This review article will highlight the recent advances in organocatalysis in step growth polymerizations. We will primarily focus our review on the synthesis of commercially important polyesters and polyurethanes using organocatalysis, however, the review will also emphasize recent literature describing less explored polymers, such as polyethers, polycarbonates, and polybenzoins, which have recently employed organocatalysts. Moreover, the article will draw attention to recent efforts in the use of carbon dioxide as a monomer for the preparation of step-growth polymers in the presence of organocatalysis., The authors thank the European Commission for its financial support through the projects SUSPOL-EJD 642671. Haritz Sardon gratefully acknowledges financial support from MINECO through project MAT2017-83373-R.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Temperature responsive PEG-based polyurethanes “ a la carte”

  • Ronco, Ludmila Irene
  • Basterrechea Gorostiza, Andere
  • Mantione, Daniele
  • Hernández Aguirresarobe, Roberto
  • Minari, Roque Javier
  • Gugliotta, Luis Marcelino
  • Mecerreyes Molero, David
  • Sardon Muguruza, Haritz
Temperature responsive polymers able to alter their chemical or physical properties have been extensively investigated. Most of these polymers have an alkane polymer backbone with only carbon-carbon bonds. In this sense, the design of thermoresponsive polymers not only with sharp transition temperatures but also possessing hydrolizable linkages such as esters, carbonates or urethanes in the main backbone are highly desired. Here we show a library of thermoresponsive cationic and anionic polyurethanes synthesized by copolymerization of isophorone diisocyanate with poly(ethylene glycol) and ionic diols. These polyurethanes exhibit lower critical solution temperatures (LCST) that can be easily tuned from 20 C to 60 C by altering the polyurethane composition. Our findings show that LCST temperature could be reduced by the using poly(ethylene glycol) of lower molecular weight and/or increasing the hydrophobicity of the employed ionic diol. We also demonstrated that the thermoresponsive behavior could be translated to hydrogels based on those ionic polyurethanes. These “a la carte” thermoresponsive polyurethanes materials present a great potential in the biomedical field due to the presence of hydrolizable linkages in the main polymer backbone, The authors would like to thank the European Commission for their financial support through the project SUSPOL-EJD 642671 and the Gobierno Vasco/Eusko Jaurlaritza (Grant IT999-16). Ludmila I. Ronco thanks to the European Project IRSES-IONRUN and CONICET of Argentina for the financial support of her stay in Spain.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Room temperature synthesis of non-isocyanate polyurethanes (NIPUs) using highly reactive N-substituted 8-membered cyclic carbonates

  • Yuen, Alexander
  • Bossion, Amaury
  • Gómez Bengoa, Enrique
  • Ruipérez Cillán, Fernando
  • Isik, Mehmet
  • Hedrick, James
  • Mecerreyes Molero, David
  • Yi, Yan Yang
  • Sardon Muguruza, Haritz
There is a growing interest to develop green synthetic pathways towards industrially relevant polymers such as polyurethanes without the use of toxic and dangerous isocyanate monomers. The most promising route towards non-isocyanate polyurethanes (NIPUs) is the aminolysis of dicyclic carbonates derived from renewable resources. Although, cyclic carbonates of 5- and 6-members have been successfully proposed, aminolysis of these compounds requires the use of high temperatures to obtain high conversions and subsequently high molecular weight NIPUs. Indeed, these cyclic carbonates do not allow the achievement of high molecular weight NIPUs using low reactive diamines analogous to two of the most industrially relevant aliphatic diisocyanates. Herein, we report a (bis) N-substituted 8-membered cyclic carbonate that could be prepared from naturally abundant epoxides, diamines and dimethyl carbonate using sustainable chemical routes. This N-substituted 8 membered cyclic carbonate appeared to be much more reactive than the smaller 5- and 6-membered cyclic carbonates. Due to this increased reactivity, we obtained high molecular weight NIPUs using a variety of diamines, including industrially relevant hindered aliphatic diamines, such as 5-amino-1,3,3-trimethylcyclohexanemethylamine (IPDA) and 4,4’-methylenebis(cyclohexylamine). The synthesis of NIPUs was demonstrated at room temperature without the need for any additional catalyst. Altogether, this paper shows that (bis) N-substituted 8-membered cyclic carbonates are ideal starting materials for the synthesis of sustainable non-isocyanate polyurethanes (NIPUs)., he authors would like to thank the European Commission for its financial support through the projects Renaissance-ITN 289347, OrgBIO-ITN 607896 and SUSPOL-EJD 642671. Haritz Sardon gratefully acknowledges financial support from MINECO through project SUSPOL and FDI 16507. Yi Yan Yang gratefully acknowledges financial support from Institute of Bioengineering and Nanotechnology (Biomedical Research Council, Agency for Science, Technology and Research, Singapore). We are also thankful for the technical and human support provided by IZO-SGI SGIker of UPV-EHU and European funding (ERDF and ESF).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Organic-Acid Mediated Bulk Polymerization of e-Caprolactam and Its Copolymerization with e-Caprolactone

  • Sánchez Sánchez, Ana
  • Basterrechea Gorostiza, Andere
  • Mantione, Daniele
  • Etxeberria Lizarraga, Agustín
  • Elizetxea, Cristina
  • De la Calle, Amaia
  • García Arrieta, Sonia
  • Sardon Muguruza, Haritz
  • Mecerreyes Molero, David
Polyamides (PA) constitute one of the most important classes of polymeric materials and have gained strong position in different areas, such as textiles, fibers, and construction materials. Whereas most PA are synthesized by stepgrowth polycondensation, PA 6 is synthesized by ring opening polymerization (ROP) of e-caprolactam (e-CLa). The most popular ROP methods involve the use of alkaline metal catalyst difficult to handle at large scale. In this article, we propose the use of organic acids for the ROP of e-CLa in bulk at 180 8C (below the polymer’s melting point). Among evaluated organic acids, sulfonic acids were found to be the most effective for the polymerization of e-CLa , being the Brønsted acid ionic liquid: 1-(4- sulfobutyl)23-methylimidazolium hydrogen sulfate the most suitable due to its higher thermal stability. End-group analysis by 1H nuclear magnetic resonance and model reactions provided mechanistic insights and suggested that the catalytic activity of sulfonic acids was a function of not only the acid strength, but of the nucleophilic character of conjugate base as well. Finally, the ability of sulfonic acid to promote the copolymerization of e-CLa and e-caprolactone is demonstrated. As a result, poly(e-caprolactam-co-e-caprolactone) copolymers with considerably randomness are obtained. This benign route allows the synthesis of poly(ester amide)s with different thermal and mechanical properties., The authors acknowledge the financial support of Euskampus Fundazioa, the Spanish Ministery of Economy and Competition through project CTQ2014‐53458‐1 and the European Commission through project SUSPOL‐EJD 642671 and FP7‐PEOPLE‐212‐ITN 316832‐OLIMPIA (D. Mantione). Haritz Sardon gratefully acknowledges financial support from MINECO through project FDI 16507. A. Sanchez‐Sanchez thanks “Convocatoria de Contratación para la especialización de personal investigador doctor en la UPV/EHU” for financial support. The SGIKER UPV/EHU for the NMR facilities of Gipuzkoa campus are acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Effect of Chemical Structure and Salt Concentration on the Crystallization and Ionic Conductivity of Aliphatic Polyethers

  • Olmedo Martínez, Jorge L.
  • Meabe Iturbe, Leire
  • Basterrechea Gorostiza, Andere
  • Mecerreyes Molero, David
  • Müller Sánchez, Alejandro Jesús
Poly(ethylene oxide) (PEO) is the most widely used polymer in the field of solid polymer electrolytes for batteries. It is well known that the crystallinity of polymer electrolytes strongly affects the ionic conductivity and its electrochemical performance. Nowadays, alternatives to PEO are actively researched in the battery community, showing higher ionic conductivity, electrochemical window, or working temperature range. In this work, we investigated polymer electrolytes based on aliphatic polyethers with a number of methylene units ranging from 2 to 12. Thus, the effect of the lithium bis(trifluoromethanesulfone) imide (LiTFSI) concentration on the crystallization behavior of the new aliphatic polyethers and their ionic conductivity was investigated. In all the cases, the degree of crystallinity and the overall crystallization rate of the polymers decreased drastically with 30 wt % LiTFSI addition. The salt acted as a low molecular diluent to the polyethers according to the expectation of the Flory-Huggins theory for polymer-diluent mixtures. By fitting our results to this theory, the value of the interaction energy density (B) between the polyether and the LiTFSI was calculated, and we show that the value of B must be small to obtain high ionic conductivity electrolytes., We wish to thank the National Council of Science and Technology (CONACYT), Mexico for the grant awarded to Jorge L. Olmedo Martinez (471837). We are grateful to the financial support of the European Commission through the project SUSPOL-EJD 642671 and European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250. Alejandro J. Muller acknowledges the support of MINECO through grant MAT2017-83014-C2-1-P. Leire Meabe thanks Spanish Ministry of Education, Culture and Sport for the predoctoral FPU.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

UV-cross-linked poly(ethylene oxide carbonate) as free standing solid polymer electrolyte for lithium batteries

  • Meabe Iturbe, Leire
  • Huynh, Tan Vu
  • Mantione, Daniele
  • Porcarelli, Luca
  • Li, Chunmei
  • O'Dell, Luke A.
  • Sardon Muguruza, Haritz
  • Armand, Michel
  • Forsyth, Maria
  • Mecerreyes Molero, David
The supporting information is attached., Aliphatic polycarbonates have emerged as promising polymer electrolytes due to their combination of moderate ionic conductivity and high lithium transference numbers. However, the mechanical properties of the aliphatic polycarbonates polymer electrolytes are usually weak due to the low molecular weight achieved and plasticization effect of the added lithium salt. In this article, we present a copolymer having poly(ethylene oxide) segments linked by carbonate groups with cross-linkable methacrylic pendant groups. Once the polymer and the lithium salt were mixed, the poly(ethylene oxide carbonate) was cross-linked by UV light producing a free standing solid polymer electrolyte (SPE). Different SPE formulations were designed by varying the LiTFSI concentration within the polymer matrix showing the highest ionic conductivity of 1.3·10−3 S cm−1 and a lithium transference number of 0.59 at 70 °C. 7Li solid-state NMR experiments were used to correlate the lithium cation environment and dynamics with ionic conductivity. At the same temperature the electrochemical stability window was analyzed, and a reasonable value of 4.9 V was achieved. The study was complemented by mechanical and thermal stability measurements. Finally, the optimized UV-cross-linked poly(ethylene oxide carbonate) was tested as electrolyte in lithium metal symmetric cell at 70 °C, showing low over-potential values and a stable solid electrolyte interphase layer., We are grateful to the financial support of the European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 and the Basque Government through ETORTEK Energigune 2013 and IT 999-16. Leire Meabe thanks Spanish Ministry of Education, Culture and Sport for the predoctoral FPU fellowship received to carry out this work. The authors would like to thank the European Commission for their financial support through the project SUSPOL-EJD 642671 and the Gobierno Vasco/Eusko Jaurlaritza (IT 999-16). The authors thank for technical and human support provided by SGIker of UPV/EHU for the NMR facilities of Gipuzkoa campus.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Isomorphic polyoxyalkylenes copolyethers obtained by copolymerization of aliphatic diols

  • Basterrechea Gorostiza, Andere
  • Gabirondo Amenabar, Elena
  • Flores, Irma
  • Etxeberria Lizarraga, Agustín
  • González Vives, Alba
  • Müller Sánchez, Alejandro Jesús
  • Mecerreyes Molero, David
  • Coulembier, Olivier
  • Sardon Muguruza, Haritz
Isomorphism in random copolymers occurs when comonomer units can crystallize within a single crystalline lattice in the entire composition range. This ideal behavior is rare in random copolymers and only a few examples of isomorphism are found in copolyesters and copolycarbonates. In this work, we show a series of polyoxyalkylenes copolyethers obtained by copolymerization of 1,6-hexanediol and 1,12-dodecanediol which are able to crystallize in the entire composition range and display an isomorphic behavior. The copolymers were synthesized via a bulk self-condensation method at high temperature, using a thermally stable Non-Eutectic Mixture Organocatalyst (NEMO) prepared from methanesulfonic acid (MSA) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). The final molar ratios of the copolyethers were calculated by 1H NMR spectroscopy and the random distribution of the two monomeric units was confirmed by 13C NMR spectroscopy. The effect of the composition of comonomer units on the crystalline structure was investigated by DSC and WAXS. The two comonomeric units along the chain can co-crystallize regardless of the composition, while displaying melting point values that vary linearly in between those of the parent homopolymers (54,9 and 84,7 °C). The crystalline reflections given by WAXS demonstrated that the two comonomers are miscible in the crystalline state and meet the general criteria to be regarded isomorphic random copolymers. Finally, a random terpolymer was synthetized from 1,6-hexanediol, 1,10-decanediol and 1,12-dodecanediol, which also shows a single melting temperature, thus demonstrating the versatility of the polymerization route employed., The authors thank the European Commission for its financial support through the projects SUSPOL-EJD 642671. Haritz Sardon and David Mecerreyes gratefully acknowledge financial support from MINECO through project POLYCE. A. J. Müller, O. Coulembier and H. Sardon also acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). The authors also thank the technical and human support provided by Mrs. Sofia Guezala (SGIker) of UPV/EHU for the NMR analysis. H. Sardon, A.J. Müller and I. Flores acknowledge funding and beam time from ALBA Synchrotron facility through the project: 2017092338 (2018). A. J. Müller gratefully acknowledges financial support from MINECO through project MAT2017-83014-C2-1-P. A. Etxeberria acknowledges financial support from the Basque Government (GIC IT-618-13). O. C. is Research Associate for the F.R.S.-FNRS. Irma Flores would like to acknowledge Conacyt (Mexico) for supporting her PhD studies with a scholarship.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization-Induced Gelling as a Method to 4D Print Low-Water-Content Non-isocyanate Polyurethane Hydrogels

  • Fanjul Mosteirin, Marcos Noé
  • Aguirresarobe Hernández, Robert
  • Sadaba Larraona, Naroa
  • Larrañaga Espartero, Aitor
  • Marín Ameztoy, Edurne
  • Martín Pérez, Jaime
  • Ramos Gómez, Nicolás
  • Arno, Maria C.
  • Sardon Muguruza, Haritz
  • Dove, Andrew
[EN]The use of three-dimensional (3D) printable hydrogels for biomedical applications has attracted considerable attention as a consequence of the ability to precisely define the morphology of the printed object, allowing patients' needs to be targeted. However, the majority of hydrogels do not possess suitable mechanical properties to fulfill an adequate rheological profile for printability, and hence, 3D printing of cross-linked networks is challenging and normally requires postprinting modifications to obtain the desired scaffolds. In this work, we took advantage of the crystallization process of poly(ethylene glycol) to print non-isocyanate poly(hydroxyurethane) hydrogels with tunable mechanical properties. As a consequence of the crystallization process, the hydrogel modulus can be tuned up to 3 orders of magnitude upon heating up to 40 degrees C, offering an interesting strategy to directly 3D-print hydrogels without the need of postprinting cross-linking. Moreover, the absence of any toxicity makes these materials ideal candidates for biomedical applications., The authors acknowledge financial support from the European Commission through SUSPOL-EJD 642671 project. M.C.A. thanks the University of Birmingham for funding.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Crystallization-Induced Gelling as a Method to 4D Print Low-Water-Content Non-isocyanate Polyurethane Hydrogels

  • Fanjul-Mosteirín, Noé
  • Aguirresarobe, Robert
  • Sadaba, Naroa
  • Larrañaga, Aitor
  • Marín, Edurne
  • Martín, Jaime
  • Ramos-Gómez, Nicolás
  • Arno, Maria Chiara
[Abstract] The use of three-dimensional (3D) printable hydrogels for biomedical applications has attracted considerable attention as a consequence of the ability to precisely define the morphology of the printed object, allowing patients’ needs to be targeted. However, the majority of hydrogels do not possess suitable mechanical properties to fulfill an adequate rheological profile for printability, and hence, 3D printing of cross-linked networks is challenging and normally requires postprinting modifications to obtain the desired scaffolds. In this work, we took advantage of the crystallization process of poly(ethylene glycol) to print non-isocyanate poly(hydroxyurethane) hydrogels with tunable mechanical properties. As a consequence of the crystallization process, the hydrogel modulus can be tuned up to 3 orders of magnitude upon heating up to 40 °C, offering an interesting strategy to directly 3D-print hydrogels without the need of postprinting cross-linking. Moreover, the absence of any toxicity makes these materials ideal candidates for biomedical applications., The authors acknowledge financial support from the European Commission through SUSPOL-EJD 642671 project. M.C.A. thanks the University of Birmingham for funding