Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 72
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Solid–Solid Crystal Transitions (δ to α) in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

  • Pérez Camargo, Ricardo Arpad
  • Liu, Guoming
  • Meabe Iturbe, Leire
  • Zhao, Ying
  • Sardon Muguruza, Haritz
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, Poly (hexamethylene carbonate) (PC6) and poly (octamethylene carbonate) (PC8) were studied under different crystallization conditions. Using differential scanning calorimetry (DSC), a new solid-solid transition, denoted α to δ transition, was detected at low temperatures (<RT) in both PC6 and PC8 samples. The α to δ transition was represented by exothermic (i.e., α to δ) (−6 °C (PC6) and −20 °C (PC8)) and endothermic peaks (i.e., δ to α) (15 °C (PC6) and 28 °C (PC8)), during cooling and heating DSC scans, respectively. Isothermal tests revealed that this solid-solid transition depends on the specific thermal history, since it is not observed at isothermal temperatures higher than room temperature. Still, it is detected in the subsequent cooling and heating scans. Wide-angle X-ray scattering (WAXS) and Fourier-transform infrared spectroscopy (FT-IR) experiments were performed at identical conditions to those by DSC. WAXS experiments showed lower d-spacings in the δ phase than in the α one, corresponding to a unit cell shrinkage, explained by a more efficient packing of the methylene groups in the δ phase. The δ phase is also characterized, according to FT-IR experiments, by more ordered conformation of the methylene groups (i.e., reflected in the appearance of a new absorption band) compared to the less ordered conformation in the α phase., This work is supported by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (51820105005, 21922308, and 52050410327). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778092. This work has also received funding from MINECO through project MAT2017-83014-C2-1-P and from Basque Government through grant IT1309-19. R.A.P.-C is supported by the China Postdoctoral Science Foundation (2020M670462). G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). We also thanks to the BSRF (beamline 1W2A).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Recent Applications of the Successive Self-nucleation and Annealing (SSA) Thermal Fractionation Technique, Recent applications of the Successive Self-nucleation and Annealing thermal fractionation technique

  • Pérez Camargo, Ricardo Arpad
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
Successive Self-nucleation and Annealing (SSA) is a thermal fractionation technique that is performed by Differential Scanning Calorimetry (DSC). The combination of non-isothermal and isothermal steps applied during SSA achieves efficient molecular segregation during polymer crystallization. Such molecular segregation magnifies the effect of defects in polymer chain crystallization, thereby providing information on chain structure. The technique was created and implemented by Müller and co-workers in 1997, becoming a powerful resource for studying ethylene/α-olefin copolymers. The different variables to design the SSA protocol: fractionation window, fractionation time, scanning rate, sample mass, and the first self-nucleation temperature to be applied (Ts, ideal), have been previously reviewed, together with the different applications of SSA. SSA versatility, simplicity (when properly applied), and short times to produce results have allowed its use to study novel and more complex polymeric systems. This review article explores the most recent applications of SSA of the past decade. First, the principles of the technique are briefly explained, covering all the relevant variables. Next, we have selected different cases that show how SSA is employed in various novel fields, such as studying intermolecular interactions and topological effects in homopolymers; supernucleation and antinucleation effects in nanocomposites, including the pre-freezing phenomenon; crystallization modes in random copolymers; solid-solid transitions; miscibility, co-crystallization and composition in blends; evaluation of polymer synthesis variables; and the novel information that could be gained by using fast scanning chip-based calorimetry. Finally, we offer a perspective on SSA, a technique that has become a powerful method for studying the distribution of defects affecting crystallization in semi-crystalline polymers., This work has received funding from the Basque Government through grant IT1503-22 and from MICINN (PID2020-113045GB-C21). We would also like to acknowledge the financial support from the BIODEST and the REPOL projects; these projects have received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreements No. 778092 and No. 860221. It has also been supported by the National Natural Science Foundation of China (51820105005, 52050410327).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Nucleation of poly(lactide) partially wet droplets in ternary blends with poly(butylene succinate) and poly(ε-caprolactone), Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(ε-caprolactone)

  • Fenni, Seif Eddine
  • Wang, Jun
  • Haddaoui, Nacerddine
  • Favis, Basil D.
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
This work presents the first investigation on the crystallization behavior of partially wet droplets in immiscible ternary blends. Poly(lactide), poly(ε-caprolactone), and poly(butylene succinate) (PLA, PCL, and PBS, respectively) were melt blended in a 10/45/45 weight ratio to produce a “partial wetting” morphology with droplets of the PLA minor phase located at the interface between the other two major components. The crystallization process of the higher melting PLA droplets was studied by polarized light optical microscopy, while the other components remain in the molten state. We found that neighboring partially wet droplets nucleate in close sequence. This is unexpected since partially wet droplets display points of three-phase contact and, hence, should not touch each other. Moreover, the onset of poly(lactide) crystallization is frequently observed at the interface with molten PCL or PBS, with a significant preference for the former polymer. The observed sequential droplet-to-droplet crystallization is attributed to the weak partial wetting behavior of the PCL/PLA/PBS ternary system. In fact, the contact between the interfacially confined droplets during crystallization due to their mobility can lead to a transition from a partial to a completely wet state, with the formation of thin continuous layers bridging larger partially wet droplets. This allows crystallization to spread sequentially between neighboring domains. Using a simple heterogeneous nucleation model, it is shown that the nucleation of PLA on either PCL or PBS melts is energetically feasible. This study establishes a clear relationship between the unique partial wetting morphology of ternary blends and the nucleation of the minor component, paving the way to the understanding and control of crystallization in multiphasic polymer blends for advanced applications., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Understanding polymer nucleation by studying droplets crystallization in immiscible polymer blends

  • Fenni, Seif Eddine
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
This Feature Article reviews our recent work on the nucleation and crystallization of finely dispersed semicrystalline polymeric droplets in immiscible matrices. Droplets dispersions can be used as a toolbox to investigate polymer nucleation. Studying the overall crystallization kinetics of the droplets can be a way to separate the contributions of nucleation and growth rates depending on the sample. To characterize the relative importance of nucleation versus growth, we have defined a dimensionless parameter named the “Turnbull number”. This number equals the ratio of the time needed for a crystal to grow inside the average droplet volume, divided by the required time for nucleation to occur in the same droplet. We show examples for Turnbull numbers close to unity, where the overall crystallization kinetics of the droplets is dominated by crystal growth, and a sigmoidal (second or third order) kinetics is obtained. On the other hand, when the overall crystallization of the droplets is controlled by nucleation, very low Turnbull numbers are obtained (e.g., 0.1–0.01) with concomitant first-order kinetics. We also show how the nucleation step in the droplets can be skipped through the strategic use of self-nucleation. In the case of double crystalline polymer blends, the self-nucleation of the matrix can be used to study the surface nucleation of the droplets at the interface. The role of interfacial roughness in promoting droplet nucleation is also addressed, together with the addition of heterogeneous nucleating agents. Considering all the body of information, we demonstrate that studying the overall kinetics of different droplet dispersions can contribute to the fundamental understanding of polymer nucleation., This work has received funding from the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST and the REPOL projects; these projects have received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreements No. 778092and No. 860221.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Competition between Chain Extension and Crosslinking in Polyamide 1012 during High Temperature Thermal Treatments as Revealed by SSA Fractionation

  • Li, Xuan
  • Wang, Lili
  • Wang, Dujin
  • Dong, Xia
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, Self-nucleation and annealing (SSA) is an efficient way to thermally fractionate semi-crystalline polymers. The thermal fractions produced by SSA have distinct melting points that correspond to different average lamellar thickness. In this research, SSA was adopted to investigate the in-situ evolution of lamellar thickness of polyamide 1012 (PA1012), which was affected by high temperature thermal treatments. SSA successfully fractionated PA1012 into 4 thermal fractions with different average lamellar thicknesses. The integrated area of the first or second SSA fraction against the total endothermic integrated area was plotted as a function of thermal treatment time to study the kinetics of lamellar thickness changes. Two opposing structural effects, chain growth and crosslinking, occurred during the applied thermal treatment (which consisted in thermally treating the material by holding it isothermally at temperatures in the range of 140-250 ºC) and they were detected as a function of time by SSA, rheology and dissolution behavior. The structural changes increased the viscosity and Tg and decreased the overall crystallization rate. Based on the construction of a master curve of “time-temperature superposition” at a reference temperature (T0) of 190 oC, the mechanism for lamellar thickness evolution was divided into three stages: (a) Stage I: Initially, PA1012 end groups reacted rapidly with active sites to generate chemically crosslinked structures. (b) Stage II: As the number of end groups rapidly increased, amidation reactions between carboxylic end groups and amine end groups resulted in linear chain growth. Linear chain growth and crosslinking occurred simultaneously, and there was no change in lamellar thickness or its distribution. (c) Stage III: Eventually, an increasing number of end groups was formed in the system, most of which led to linear chain growth via chain end-group reactions. These structural changes during the applied thermal treatments enhanced the mechanical properties and the heat resistance of PA1012. This work provides specific guidance for improving the toughness, strength and heat resistance of polyamide materials., We acknowledge generous financial support from the following grants: National Key R&D Program of China (2017YFB0307600) and STS project of Chinese Academy of Sciences (KFJ-STS-QYZX-113). A.J.M. acknowledges funding from the Basque Government through grant IT1309-19. We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Controlling the Isothermal Crystallization of Isodimorphic PBS-ran-PCL Random Copolymers by Varying Composition and Supercooling

  • Safari, Maryam
  • Mugica Iztueta, Miren Agurtzane
  • Zubitur Soroa, María Manuela
  • Martínez de Ilarduya, Antxon
  • Muñoz-Guerra, Sebastián
  • Müller Sánchez, Alejandro Jesús
In this work, we study for the first time, the isothermal crystallization behavior of isodimorphic random poly(butylene succinate)-ran-poly(ε-caprolactone) copolyesters, PBS-ran-PCL, previously synthesized by us. We perform nucleation and spherulitic growth kinetics by polarized light optical microscopy (PLOM) and overall isothermal crystallization kinetics by differential scanning calorimetry (DSC). Selected samples were also studied by real-time wide angle X-ray diffraction (WAXS). Under isothermal conditions, only the PBS-rich phase or the PCL-rich phase could crystallize as long as the composition was away from the pseudo-eutectic point. In comparison with the parent homopolymers, as comonomer content increased, both PBS-rich and PCL-rich phases nucleated much faster, but their spherulitic growth rates were much slower. Therefore, the overall crystallization kinetics was a strong function of composition and supercooling. The only copolymer with the eutectic composition exhibited a remarkable behavior. By tuning the crystallization temperature, this copolyester could form either a single crystalline phase or both phases, with remarkably different thermal properties., Funding: This research was funded by (a) MINECO through project MAT2017-83014-C2-1-P, (b) ALBA synchrotron facility through granted proposal 2018082953 (c) the Basque Government through grant IT1309-19 and (d) European Union´s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 778092 Acknowledgments: MS gratefully acknowledges the award of a PhD fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

The effect of initial molecular weight on the structural evolution of Polyamide 1012 during high-temperature thermal treatments as revealed by Successive Self-Nucleation and Annealing, Effect of Initial Molecular Weight on the Structural Evolution of Polyamide 1012 during High-Temperature Thermal Treatments as Revealed by Successive Self-Nucleation and Annealing

  • Li, Xuan
  • Li, Xueting
  • Wang, Yu
  • Zhu, Ping
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
  • Dong, Xia
Unformatted preprint version of the submitted article, Successive self-nucleation and annealing (SSA) can thermally fractionate semi-crystalline polymers, thus detecting the characteristic structural features that lead to specific melting point distributions (corresponding to the lamellar thickness distribution in the sample). SSA has been employed to investigate the structural evolution of polyamide 1012 (PA1012) when it is submitted to thermal treatments in the solid-state (below the melting point, Tm) as well as in the liquid-state (above Tm), as a function of the molecular weight of the sample. Below Tm, mainly chemical crosslinking occurred, thus provoking the decrease in the melting enthalpy of the highest temperature SSA melting fraction. The structural evolution was limited primarily by crystallization, and the high crystallinity of the low molecular weight samples led to low crosslinking rates. Above Tm, the structural evolution was correlated with the melt viscosity and the end group concentration. The concentration and diffusion ability of end groups was inversely proportional to the initial melt viscosities, therefore linear chain growing rate increased with the decrease in initial melt viscosities. Crosslinking reaction rate increased with the increase in initial melt viscosities. This work has determined the structural evolution differences of PA1012 depending on different initial states. This work can provide guidance for studies of thermal structural evolution of all AABB-type polyamides and subsequent design of high-performance materials with various structures according to their application requirements., We acknowledge generous financial support from the following grants: National Key R&D Program of China (2017YFB0307600) and the National Natural Sciences Foundation of China (21574140). A.J.M. acknowledges funding from the Basque Government through grant IT1309-19. We would like to thank the financial support provided by the BIODEST project, this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization Kinetics and Nanoparticle Ordering in Semicrystalline Polymer Nanocomposites

  • Altorbaq, Abdullah S.
  • Krauskopf, Alejandro A.
  • Wen, Xiangning
  • Pérez Camargo, Ricardo Arpad
  • Su, Yunlan
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
  • Kumar, Sanat K.
Unformatted post-print version of the accepted article, There has been considerable interest in the nucleation and crystallization of polymers in the presence of nanoparticles (NPs, or nanofillers in general, NFs). Most of the extensive work in this area has focused on anisotropic, non-Brownian NFs (e.g., clay sheets, carbon nanotubes) whose spatial dispersion state in these nanocomposites is controlled by the process by which they are formed. While NF spatial dispersion is thus generally poor, or poorly characterized, in many works, thermodynamic handles that can be used to control NF dispersion state in the polymer melt include (a) favorable interactions between the polymer chains and the bare NP surfaces, or (b) the density and length of the chains, with the same chemistry as the matrix, grafted to the NP surface. These relatively large NFs merely act as immovable objects that affect the kinetics of nucleation by providing heterogeneous sites, and the crystallization rate by confining the polymer in the melt state. The dispersion state of the NFs can dramatically 2 affect the nucleation and crystallization of the matrix, but in most cases reported, the NFs increase nucleation efficiency relative to the neat polymer. At higher NF loadings, the effect of polymer confinement by the NFs dominates, leading to a decrease in crystal growth rates. In this review, we first describe the most important lessons learned from these commonly studied systems and then use this knowledge to understand the results obtained when small, mobile spherical NPs (typically smaller than 100 nm in size) are used as the nanofillers. The role of NP mobility, which provides for dynamic confinement of the polymer melt, on the kinetics of polymer crystallization (nucleation, growth, and overall crystallization) and how this behavior is mostly consistent with the case of immobile NF is a second important focus of our review. In addition to the role of NFs on crystallization kinetics, we discuss recently reported nanoparticle ordering phenomena, i.e., how the crystallization of polymers under appropriate conditions can move and organize small spherical NPs within the amorphous regions of the semicrystalline morphology. Such phenomena are clearly not observed for large NFs and hence provide a point of departure from past work in this well-traveled area., This work was supported by grants DE-SC0018182, DE-SC0018135, and DE-SC0018111 funded by the U.S Department of Energy, Office of Science. We would like to thank the financial support provided by National Key R&D Program of China (Grant No. 2017YFE0117800) and the National Natural Science Foundation of China (Grant Nos. 21574141, 51820105005, and 52050410327). We also acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 778092. A.J.M. acknowledges funding from MINECO, project MAT2017-83014-C2-1-P, and from Basque Government through grant IT1309-19. A.A.K. acknowledges funding from the Gates Millennium Scholars program under Grant No. OOP1202023 from the Bill & Melinda Gates Foundation. R.A.P.-C is supported by the China Postdoctoral Science Foundation (Grant No. 2020M670462).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Tunable enzymatic biodegradation of poly(butylene succinate): biobased coatings and self-degradable films

  • Peñas Núñez, Mario Iván
  • Criado González, Miryam
  • Martínez de Ilarduya, Antxon
  • Flores, Araceli
  • Raquez, Jean-Marie
  • Mincheva, Rosica
  • Müller Sánchez, Alejandro Jesús
  • Hernández, Rebeca
Biodegradation of polyesters driven by enzymes is considered as one of the most effective way of degradation of these materials, as a way to control plastics accumulation in the environment. In this study, we present two different strategies to tune the enzymatic degradation of PBS films triggered by a lipase from Pseudomonas cepacia. Firstly, the kinetics of enzymatic degradation of PBS films was regulated by applying multilayer coats of polysaccharide alginate and chitosan (Alg/Chi) films. Secondly, self-degradable PBS films were prepared by embedding lipase-filled alginate particles. For comparison purposes, a detailed enzymatic degradation study of neat PBS films exposed to a lipase from P. cepacia in solution was made to determine the main experimental parameters influencing their degradation in solution. The results showed that an increase in enzyme concentration increased the degradation extent and rate of neat PBS films. At a fixed enzyme concentration, stirring of the solution containing the enzyme and the PBS also increased the biodegradation rate. In the case of the PBS films coated with a different number of Alg/Chi layers by spray-assisted LbL and subjected to enzymatic degradation experiments in solution, the extent of degradation was found to be dependent on the number of protective coating layers. Therefore, the Alg/Chi biobased coating constitutes an effective barrier to the diffusion of the lipase, thus proving its effectiveness in modulating the enzymatic activity as a function of coating thickness. In the case of self-degradable PBS containing lipase-embedded alginate beads (employed to protect the enzyme during high-temperature processing), only limited biodegradation was observed as the amount of encapsulated enzyme employed was too small. Nonetheless, these results are promising, as the enzymatic activity –indicative of the degradation capacity of the enzyme– determined for all these samples was about 2 orders of magnitude lower than that of previous assays., This research was funded by the projects MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). J.M.R. is a FRS-FNRS Senior Research Associate.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Using Successive Self-nucleation and Annealing (SSA) to detect the solid-solid transitions in poly (hexamethylene carbonate) and poly (octamethylene carbonate), Using Successive Self-Nucleation and Annealing to Detect the Solid−Solid Transitions in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

  • Pérez Camargo, Ricardo Arpad
  • Liu, Guoming
  • Meabe Iturbe, Leire
  • Zhao, Ying
  • Sardon Muguruza, Haritz
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
Unformatted post-print version of the accepted article, Solid-solid transitions in poly (hexamethylene carbonate) (PC6) and poly (octamethylene carbonate) (PC8), denoted δ to α transition, have been investigated, using self-nucleation and Successive Self-nucleation and Annealing (SSA) technique. The SSA protocol was performed in-situ for thermal (differential scanning calorimetry (DSC)), structural (Wide-angle X-ray Scattering (WAXS)), and conformational (Fourier-transformed Infrared Spectroscopy (FT-IR)) characterization. The final heating after SSA fractionation displayed an enhanced (compared to a standard second DSC heating scan) endothermic and unfractionated peak signal at low temperatures corresponding to the δ to α transition. The improved (i.e., higher enthalpy and temperature than in other crystallization conditions) δ to α transition signal is produced by annealing the thickest lamellae made up by α and β phase crystals after SSA treatment. As thicker lamellae are annealed, more significant changes are produced in the δ to α transition, demonstrating the transition dependence on crystal stability, thus, on the crystallization conditions. The ability of SSA to significantly enhance the observed solid-solid transitions makes it an ideal tool to detect and study this type of transitions. In-situ WAXS reveals that the δ to α transition corresponds to a change in the unit cell dimensions, evidenced by an increase in the d-spacing. This implies a more efficient chain packing in the crystal, for both samples, in the δ phase (lower d-spacing at low temperatures) than in the α phase (higher d-spacing at high temperatures). The chain packing differences are explained through in-situ FT-IR measurements that show the transition from ordered (δ phase) to disordered (α phase) methylene chain conformations., We would like to acknowledge financial support provided by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (51820105005, 21922308, and 52050410327). We also acknowledge financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 778092. This work has also received funding from MINECO through project MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. R.A.P.-C is supported by the China Postdoctoral Science Foundation (2020M670462). G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). We also thank the BSRF (beamline 1W2A) for providing beamtime.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Surface Nucleation of Dispersed Droplets in Double Semicrystalline Immiscible Blends with Different Matrices

  • Wang, Wei
  • Buzzi, Simona
  • Fenni, Seif Eddine
  • Carmeli, Enrico
  • Wang, Bao
  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
When a minor semicrystalline phase is dispersed in an immiscible blend with another polymer in the form of isolated droplets, its crystallization behavior is dominated by nucleation. In particular, nucleation can occur in the bulk volume of the phase (homogeneous nucleation), at the surface of possible nucleating foreign impurities, or at the interface with the matrix polymer. Dispersed poly(butene-1) (PB) and polycaprolactone (PCL) droplet phases are employed in various matrices (isotactic polypropylene (iPP), high density polyethylene (HDPE), poly(vinylidene fluoride) (PVDF) and poly(butylene succinate) (PBS)). The effect of matrix self-nucleation on the crystallization of the dispersed droplet phase is then probed. It is shown for all the investigated polymer blends that increasing the matrix crystallization temperature (T-c) via self-nucleation favors droplet nucleation at the interface, leading to a corresponding increase in the droplets'; T-c. Interestingly, distinct nucleation effects are observed when different polymer matrices are compared. The highest nucleating efficiency is displayed by the polymer pairs, which are known to exhibit epitaxial crystallization from previous literature, namely PB/iPP and PCL/HDPE. The order of nucleation efficiency of the other matrices is thought to be linked with the extent of crystallographic matching between the substrate and nucleating crystals., W.W. thanks the China Scholarship Council (CSC) for funding his Ph.D scholarship. The authors acknowledge the financial support from the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 778092. G.L. and A.J.M. acknowledge the financial support from the National Key R&D Program of China (2017YFE0117800). Open Access Funding provided by Universita degli Studi di Genova within the CRUI-CARE Agreement.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Biodegradable binary blends of poly (butylene succinate) or poly (ε-caprolactone) with poly (butylene succinate-ran-ε-caprolactone) copolymers: Crystallization behavior

  • Safari, Maryam
  • Pérez Camargo, Ricardo Arpad
  • Ballester Bayarri, Laura
  • Mugica Iztueta, Miren Agurtzane
  • Zubitur Soroa, María Manuela
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
  • Liu, Guoming
Unformatted preprint version of the submitted article., Poly (butylene succinate) (PBS) and polycaprolactone (PCL) are two immiscible biocompatible and biodegradable polymers. Aiming to combine the properties of these biodegradable polymers, this work explores for the first time blending PBS or PCL with PBS-ran-PCL copolymers (BSxCLy) at 75/25, 50/50, and 25/75 wt% compositions, with various copolymer contents: BS78CL22, BS46CL54, and BS15CL85. The crystallization behavior of these novel binary blends was systematically studied with non-isothermal and isothermal differential scanning calorimetry (DSC), polarized light optical microscopy (PLOM), and simultaneous wide- and small-angle X-ray scattering (WAXS and SAXS). All the blends displayed a miscible character in the amorphous state, judging by a single glass transition temperature, and in the melt state (as indicated by SAXS), but their miscibility in the crystalline state depends on the specific blend. In both PBS/BS78CL22 and PCL/BS15CL85 evidences of co-crystallization between the matrix and the crystallizable fraction of the copolymer were found. However, high comonomer exclusion, higher in the BS15CL85 than in the BS78CL22, greatly affects blend miscibility. Thus, the results show that the PBS/BS78CL22 blend is miscible, in the crystalline state, at high PBS (homopolymer) content, i.e., 75/25 and 50/50 compositions, whereas its “counterpart”, the PCL/BS15CL85 displays partial miscibility, even for high PCL (homopolymer) content. For the 25/75 blends, i.e., copolymer-rich, the homopolymer addition favors the crystallization of the copolymer-rich component. Blending PBS or PCL with BS46CL54 leads to blends that exhibit a much lower miscibility in the crystalline state than the blends prepared with BS or CL-rich copolymers, independently of the composition. But, interestingly, a novel behavior is found, since the BS46CL54 copolymer can crystallize either in PBS type crystals or in PCL type crystals depending on the polymeric matrix (PCL or PBS). The PBS favors the crystallization of the BS component, while the PCL favors the crystallization of the CL component within the random copolymer. The crystallization behavior found in this work evidences the interactions of the PBS or PCL with the BSxCLy copolymer, representing a potential strategy to combine the properties of the PBS and PCL through blending., This work has received funding from the Basque Government through grant IT1503-22. This work was also supported by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21922308, 51820105005). We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 778092. We would also like to acknowledge the financial support of the Spanish Ministry of Science and Innovation (MICINN) through grant PID2020-113045GB-C21. G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). The authors thank the ALBA synchrotron fund (2020024169), facilities and staff.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Peculiar self-nucleation behavior of a polybutene-1/ethylene random copolymer

  • Wang, Zefan
  • Dong, Xia
  • Cavallo, Dario
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, The self-nucleation behavior of a polybutene-1/ethylene random copolymer, P(B1-ran-E), which undergoes a complex crystal-crystal transition behavior, has been studied in detail. Similar to PE random copolymers, this material shows a strong melt memory effect even above equilibrium melting point of PB-1 homopolymer. Different polymorphic forms can be obtained when P(B1-ran-E) is cooled from different self-nucleation Domains. The trigonal form I' could only be nucleated in the presence of remaining form I crystals via self-seeding, while the melt memory in Domain IIa could only act as self-nuclei for kinetically favored form II. Furthermore, observations from optical microscopy illustrated that melt memory is able to enhance nucleation density but it does not affect the spherulitic growth rate., Financial supports from the National Science Foundation of China (Grant No. U1510207) and the Key Program for Coal-based Science and Technology of Shanxi Province (MH-2014-08) are gratefully acknowledged. We would like to acknowledge the financial support from the BIODEST project, this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. AJM would also like to acknowledge funding from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Experimental and Data Fitting Guidelines for the Determination of Polymer Crystallization Kinetics

  • Pérez Camargo, Ricardo Arpad
  • Liu, Guoming
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
The crystallization kinetics of semicrystalline polymers is often studied with isothermal experiments and analyzed by fitting the data with analytical expressions of the Avrami and Lauritzen and Hoffman (LH) theories. To correctly carry out the analysis, precautions both in experiments and data fitting should be taken. Here, we systematically discussed the factors that influence the validity of the crystallization kinetics study. The basic concepts and fundamentals of the Avrami and LH theories were introduced at first. Then, experimental protocols were discussed in detail. To clarify the impact of various experimental parameters selected common polymers, i.e., polypropylene and polylactide, were studied using various experimental techniques (i.e., differential scanning calorimetry and polarized light optical microscopy). Common mistakes were simulated under conditions when non-ideal experimental parameters were applied. Furthermore, from a practical point of view, we show how to fit the experimental data to the Avrami and the LH theories, using an Origin ® App developed by us., This work was financially supported by the the National Natural Science Foundation of China (Nos. 21922308 and 51820105005) and the National Key R&D Program of China (No. 2017YFE0117800). We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778092. The funding of MICINN (Spain) through grant PID2020-113045GB-C21 is gratefully acknowledged. G. L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (No. Y201908)
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Unexpected structural properties in the saturation region of the odd-even effects in aliphatic polyethers: Influence of crystallization conditions

  • Flores, Irma
  • Pérez Camargo, Ricardo Arpad
  • Gabirondo Amenabar, Elena
  • Caputo, Maria Rosaria
  • Liu, Guoming
  • Wang, Dujin
  • Sardon Muguruza, Haritz
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, A series of aliphatic polyethers with different chain lengths (nCH2= 6 to 12, and 16) is studied employing differential scanning calorimetry and X-rays scattering. The calorimetric and structural behavior of samples crystallized from the melt is divided into the odd-even and saturation regions. In the odd-even region (nCH2 = 6 to 10), the odd samples (nCH2 = 7, and 9) show enhanced calorimetric properties (e.g., higher transition temperatures) and faster crystallization kinetics than the even ones (nCH2 = 6, 8 and 10). The odd samples crystallize in orthorhombic unit cells and the even ones in monoclinic unit cells. In the saturation region (nCH2 = 11 to 16), the calorimetric properties increase as nCH2 increases without alternation. However, unexpectedly, the nCH2 = 12 displayed a mixed structure (monoclinic + orthorhombic) instead of an orthorhombic one. Thus, a structural saturation effect (i.e., an orthorhombic unit cell) is not reached. This particular structural feature was investigated under varied thermal histories, induced by different cooling rates. The samples as synthesized (i.e., crystallized during precipitation from solution) exhibited a structural saturation effect since both nCH2 = 10 and 12 display an orthorhombic unit cell. But, the nCH2 = 10 exhibits a monoclinic unit cell, and the nCH2 = 12 a mixed structure when the samples crystallize from the melt at different rates. Only the nCH2 = 16 crystallizes in an orthorhombic unit cell, independently of the thermal history. Thus, the complex odd-even effects in these aliphatic polyethers are a function of the cooling rate from the melt and sample preparation procedures (solution or melt crystallization)., We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778092. This work was also supported by Grant PID2020-113045GB-C21 funded by MCIN/AEI/10.13039/501100011033. This work has also received funding from the Basque Government through grant IT1309-19. R.A.P.-C is supported by the China Postdoctoral Science Foundation (2020M670462), and National Natural Science Foundation of China (NSFC) (52050410327). The support of the ALBA (2020024169) and SSRF synchrotron facility is gratefully acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Effect of the structural features of biobased linear polyester plasticizers on the crystallization of polylactides

  • Safari, Maryam
  • Kasmi, Nejib
  • Pisani, Carla
  • Berthe, Vincent
  • Müller Sánchez, Alejandro Jesús
  • Habibi, Youssef
This work presents, for the first time, a detailed report on how the nucleation and crystallization of polylactide (PLLA) are affected by biobased aliphatic polyesters plasticizers. Three biobased polyesters were synthesized via solvent-free two-stage melt polycondensation of adipic acid (AdA) with three different biobased aliphatic diols and used as plasticizers for poly (L-lactic acid) (PLLA). The molecular structure of the synthesized polyesters was proved using H-1 NMR, C-13 NMR and Fourier transform infrared (FTIR) spectroscopy. PLLA/AdA-based blends containing 10 wt% of the polyester plasticizers were studied by tensile tests, dynamic mechanical analysis (DMA), wide-angle x-ray scattering (WAXS), differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM). Adding the plasticizers to PLLA decreased T-g by up to 11 degrees C and significantly increased the elongation at break by about 8 times compared with neat PLLA. The addition of 10 wt% of any AdA-based plasticizer to PLLA increases the nucleation rate from the glassy state by around 50-110 % depending on the plasticizer. The overall crystallization rate from the glassy state was 2-3 times faster for the plasticized PLLAs than neat PLLA. These results are a consequence of the lower energy barrier for both nucleation and growth processes. The incorporation of AdA-based linear polyesters had an incremental impact on the crystal growth rate (or secondary nucleation) of PLLA spherulites from the melt and glassy states. In conclusion, the AdA-based aliphatic polyesters allowed to enhance PLLA crystallization rates and showed interesting potential for the formulation of fully biobased PLLA blends., The authors are grateful to the Luxembourg National Research Fond (FNR) for financial support (CATBIOSE project INTER/ANR 15/9903334) . We would like to acknowledge Coraline Sirot, Regis Vaude-mont and Benot Marcolini who continuously provide a friendly and supportive environment to help us conduct our work. We acknowledge the financial support from the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 778092. This work has also received funding from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Confined Crystallization of Polymers within Nanopores

  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
Unformatted post-print version of the accepted article, Crystallization of polymeric materials under nanoscopic confinement is highly relevant for nanotechnology applications. When a polymer is confined within rigid nanoporous anodic aluminum oxide (AAO) templates, the crystallization behavior experiences dramatic changes as the pore size is reduced, including nucleation mechanism, crystal orientation, crystallization kinetics, and polymorphic transition, etc. As an experimental prerequisite, exhaustive cleaning procedures after infiltrations of polymers in AAO pores must be performed to ensure producing an ensemble of isolated polymer-filled nanopores. Layers of residual polymers on the AAO surface percolate nanopores and lead to the so-called “fractionated crystallization”, i.e., multiple crystallization peaks during cooling. As the density of isolated nanopores in a typical AAO template exceeds the density of heterogeneities in bulk polymers, the majority of nanopores will be heterogeneity-free. This means that the nucleation will proceed by surface or homogeneous nucleation. As a consequence, a very large supercooling is necessary for crystallization, and its kinetics is reduced to a first-order process that is dominated by nucleation. Self-nucleation is a powerful method to exponentially increase nucleation density. However, when the diameter of the nanopores is lower than a critical value, confinement prevents the possibility to self-nucleate the material. Because of the anisotropic nature of AAO pores, polymer crystals inside AAO also exhibit anisotropy, which is determined by thermodynamic stability and kinetic selection rules. For low molecular weight poly(ethylene oxide) (PEO) with extended chain crystals, the orientation of polymer crystals changes from the “chain perpendicular to” to “chain parallel to” AAO pore axis, when the diameter of AAO decreases to the contour length of the PEO, indicating the effect of thermodynamic stability. When the thermodynamic requirement is satisfied, the orientation is determined by kinetics including crystal growth, nucleation and crystal growth rate. An orientation diagram has been established for PEO/AAO system, considering the cooling condition and pore size. The interfacial polymer layer has different physical properties as compared to the bulk. In poly(L-lactic acid), the relationship between the segmental mobility of the interfacial layer and crystallization rate is established. For the investigation of polymorphic transition of poly(butane-1), the results indicate that a 12 nm interfacial layer hinders the transition of Form II to Form I. Block and random copolymers have also been infiltrated into AAO nanopores, and their crystallization behavior is analogously affected as pore size is reduced., This work was supported by the National Key R&D Program of China (Grant No. 2017YFE0117800) and the National Natural Science Foundation of China (Grant Nos. 21873109, 51820105005, and 21922308). We also acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 778092. A.J.M. acknowledges funding from MINECO, Grant No. MAT2017-83014-C2-1-P, and from the Basque Government through Grant No. IT1309-19. G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant No. Y201908).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Effect of Chain Stereoconfiguration on Poly(3-hydroxybutyrate) Crystallization Kinetics

  • Caputo, Maria Rosaria
  • Tang, Xiaoyan
  • Westlie, Andrea H.
  • Sardon Muguruza, Haritz
  • Chen, Eugene Y. X.
  • Müller Sánchez, Alejandro Jesús
Poly(3-hydroxybutyrate) (PHB) is naturally accumulated by bacteria but can also be synthesized chemically. Its processability is limited, as it tends to degrade at temperatures above its melting temperature; hence, investigation into crystallization kinetics and morphology of PHB materials of both natural and synthetic origins is of great need and interest to get a better understanding of structure-property relationship. Accordingly, this contribution reports a first study of the crystallization and morphology of synthetic PHB materials of different molecular weights. These synthetic PHBs are racemic mixtures (50/50 mol %) of R and S chain configurations and are compared with an enantiopure bacterial R-PHB. Nonisothermal and isothermal crystallization studies show that R and S chains of PHB can cocrystallize in the same unit cell as the R-PHB. Most significantly, the results show that the presence of S chains decreases the overall crystallization rate, which could enhance the processability and industrialization of PHB-based materials., The work performed at CSU was supported by the U.S. National Science Foundation (NSF-1955482) to E.Y.C. W e would like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 778092. We acknowledge funding from the Basque Government through Grant IT1503-22. We also thank the ALBA synchrotron for funding (Granted Proposal 2021085253) , facilities, and staff support.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Unexpected Synthesis of Segmented Poly(hydroxyurea−urethane)s from Dicyclic Carbonates and Diamines by Organocatalysis

  • Bossion, Amaury
  • Hernández Aguirresarobe, Roberto
  • Irusta Maritxalar, María Lourdes
  • Taton, Daniel
  • Cramail, Henri
  • Grau, Etienne
  • Mecerreyes Molero, David
  • Su, Cui
  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Sardon Muguruza, Haritz
A complete study of the effect of different organocatalysts on the step-growth polyaddition of a five-membered dicyclic carbonate, namely diglycerol dicarbonate, with a poly(ethylene glycol)-based diamine in bulk at 120 °C was first carried out. The reaction was found to be dramatically catalyst-dependent, higher rates being observed in the presence of strong bases, such as phosphazenes (t-Bu-P4 or P4) and 5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). Unexpectedly, the as-formed urethane linkages entirely vanished with time, as evidenced by FTIR and 13C NMR spectroscopies, while signals due to urea bond formation progressively appeared. An advantage of the chemical transformation occurring from urethane to urea linkages was further taken by optimizing the polymerization conditions to access a range of poly(hydroxyurea−urethane)s (PHUUs) with precise urethane to urea ratio in a one-pot process. Characterization of the corresponding polymers by rheological measurements showed that the storage modulus reached a plateau at high temperatures and at high urea contents. The application temperature range of poly(hydroxyurea−urethane)s could thus be increased from 30 to 140 °C, as for regular polyurethanes. Furthermore, SAXS and phase-contrast microscopy images demonstrated that increasing the urea content improved the phase separation between soft and hard segments of these PHUUs. Altogether, this novel, straightforward, efficient, and environmentally friendly strategy enables the access to non-isocyanate poly(urea−urethane)s with tunable urethane-to-urea ratio from five-membered dicyclic carbonates following an organocatalytic pathway, The authors thank the European Commission for its financial support through the projects SUSPOL-EJD 642671, Renaissance-ITN 289347, and OrgBIO-ITN 607896. Haritz Sardon gratefully acknowledges financial support from MINECO through project SUSPOL and FDI 16507. A. J. Müller, G. Liu, and H. Sardon also acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). G. Liu is grateful to the support from the Youth Innovation Promotion Association of CAS (2015026).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Influence of chain topology (cyclic versus linear) on the nucleation and isothermal crystallization of poly(L-lactide) and poly(D-lactide)

  • Zaldua Carazo, Nerea
  • Liénard, Romain
  • Josse, Thomas
  • Zubitur Soroa, María Manuela
  • Mugica Iztueta, Miren Agurtzane
  • Iturrospe Ibarra, Amaia
  • Arbe Méndez, María Aranzazu
  • De Winter, Julien
  • Coulembier, Olivier
  • Müller Sánchez, Alejandro Jesús
In this paper, ring closure click chemistry methods have been used to produce cyclic c-PLLA and c-PDLA of a number average molecular weight close to 10 kg/mol. The effects of stereochemistry of the polymer chains and their topology on their structure, nucleation and crystallization were studied in detail employing Wide Angle X-ray Scattering (WAXS), Small Angle X-ray Scattering (SAXS), Polarized Light Optical Microscopy (PLOM) and standard and advanced Differential Scanning Calorimetry (DSC). The crystal structures of linear and cyclic PLAs are identical to each other and no differences in superstructural morphology could be detected. Cyclic PLA chains are able to nucleate much faster and to produce a higher number of nuclei in comparison to linear analogues, either upon cooling from the melt or upon heating from the glassy state. In the samples prepared in this work, a small fraction of linear or higher molecular weight cycles was detected (according to SEC analyses). The presence of such “impurities” retards spherulitic growth rates of c-PLAs making them nearly the same as those of l-PLAs. On the other hand, the overall crystallization rate determined by DSC was much larger for c-PLAs, as a consequence of the enhanced nucleation that occurs in cyclic chains. The equilibrium melting temperatures of cyclic chains were determined and found to be 5 ºC higher in comparison with values for l-PLAs. This result is a consequence of the lower entropy of cyclic chains in the melt. Self-nucleation studies demonstrated that c-PLAs have a shorter crystalline memory than linear analogues, as a result of their lower entanglement density. Successive self-nucleation and annealing (SSA) experiments reveal the remarkable ability of cyclic molecules to thicken, even to the point of crystallization with extended collapsed ring conformations. In general terms, stereochemistry had less influence on the results obtained in comparison with the dominating effect of chain topology., “UPV/EHU Infrastructure: INF 14/38”; “Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13–4E–1726” and “Mineco MAT2014-53437-C2-P”, 'Ministerio de Economia y Competitividad (MINECO), code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza (Basque Government), code: IT-654-13. O.C acknowledges financial support from the European Commission and Région Wallonne FEDER program (Materia Nova) and OPTI²MAT program of excellence, by the Interuniversity Attraction Pole Program (P7/05) initiated by the Belgian Science Policy office and by the FNRS-FRFC. OC is Research Associate of the F.R.S.-FNRS. Organic Synthesis and Mass Spectrometry Laboratory thanks F.R.S.-FNRS for the financial support for the acquisition of the Waters QToF Premier and Synapt-G2Si mass spectrometers and for continuing support. Finally, all authors would like to acknowledge Research and Innovation Staff Exchange (RISE) H2020-MSCA-RISE-2017-778092, project BIODEST for promoting cooperation between the Mons team and the UPV/EHU team.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Promotion of self-nucleation with latent Form I nuclei in polybutene-1 and its copolymer

  • Wang, Zefan
  • Dong, Xia
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
The formation of Form I nuclei of polybutene-1 (PB-1) and its copolymer with polyethylene (PB1-ran-PE) has been studied by means of modified self-nucleation protocols. Even when the self-nucleation temperature was high enough and all Form II crystals melt, re-crystallization can be accelerated if the melt-crystallized sample was annealed at low temperatures (below 60 oC for PB-1 and 75 oC for PB1-ran-PE) for just 3 min. These results suggest the formation of latent Form I nuclei within Form II crystals. This hypothesis is consistent with the observed growth of a small amount of Form I crystals during heating, after previous annealing at temperature lower than 20 °C. In addition, a peculiar phenomenon was found in PB1-ran-PE, as both Form II and Form I′ can be induced by the presence of latent Form I nuclei, due to cross-nucleation and self-nucleation effects, respectively. The final ratio of the two kinds of crystal Forms is a result of the competition between the two nucleation rates, which strongly depend on crystallization temperature. In this work, we have shown that careful design of novel self-nucleation protocols can yield evidence of the early stages of Form II to Form I transition, even when the degree of transformed crystals is below the limit of detection of conventional techniques sensitive to crystalline order (DSC, WAXD, FTIR)., Financial supports from the National Science Foundation of China (Grant No. U1510207) and the Key Program for Coal-based Science and Technology of Shanxi Province (MH-2014-08) are gratefully acknowledged. We would also like to thank the support of the Research and Innovation Staff Exchange (RISE) BIODEST H2020-MSCA-RISE-2017-778092 project.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization of isodimorphic aliphatic random copolyesters: pseudo-eutectic behavior and double-crystalline materials

  • Pérez Camargo, Ricardo Arpad
  • Arandia Ariño, Idoia
  • Safari, Maryam
  • Cavallo, Dario
  • Lotti, Nadia
  • Soccio, Michelina
  • Müller Sánchez, Alejandro Jesús
Isodimorphic random copolyesters are intriguing polymeric materials that can crystallize in their entire composition range, despite the random distribution of comonomer units along their chains. This behavior stems from the relatively similar chemical repeating units of the parent homopolymers. In this feature article, we review our recent works on isodimorphic aliphatic copolyesters, and extract general trends in the framework of the literature. Isodimorphic behavior is a complex phenomenon driven by comonomer partition within the crystalline unit cells formed. These copolyesters crystallize in the entire composition range displaying a pseudo-eutectic behavior when their melting points are plotted as a function of composition. Two crystalline phases, which resembled the crystalline structures of the parent homopolymers, are formed, depending on the considered composition range. The unit cell dimensions of the parent homopolymers change, as a consequence of the inclusion of co-units. At the pseudo eutectic point or pseudo-eutectic region, two crystalline phases can co-exist and their formation strongly depends on thermal history. In this case, double crystalline random copolyesters with two melting points and mixed double-crystalline spherulites can be obtained. The exact composition of the pseudo-eutectic point, the level of comonomer inclusion and the crystallinity degrees cannot be easily predicted by the copolyester chemical structure and composition. These are important issues for further future studies, as well as the quantitative determination of comonomer inclusion in the generated crystalline phases. The extraordinary variation of thermal properties, morphology and crystallinity that isodimorphic random copolyesters display as a function of composition, allows to conveniently tailor their biodegradation, permeability to gases and mechanical properties., R.A.P-C. and M.S acknowledge the support of their fellowships by POLYMAT Basque Center for Macromolecular Design and Engineering. I.A. acknowledges the fellowship granted by the University of the Basque Country UPV/EHU. The UPV/EHU team gratefully acknowledge the support of MINECO through grant MAT2017-83014-C2-1-P. We also gratefully acknowledge the support of the EU through the H2020-MSCA-RISE-2017-778092 project.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Correlation between Grafting Density and Confined Crystallization Behavior of Polyethylene Glycol Grafted to Silica, Correlation between Grafting Density and Confined Crystallization Behavior of Poly(ethylene glycol) Grafted to Silica

  • Wen, Xiangning
  • Su, Yunlan
  • Shui, Yudan
  • Zhao, Weiwei
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
The interfacial interactions of polymer-nanoparticles have dramatical effects on the crystallization behavior of grafted polymers. In this study, methoxy polyethylene glycol (MPEG) (molecular weights 750, 2000 and 4000 g mol−1) was grafted onto amino-modified nanosized silica (SiO2-NH2) by the “grafting to” method. The effects of the grafting density and molecular weight on the confined crystallization of grafted MPEG (MPEG-g-SiO2) were systematically investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and wide-angle X-ray scattering (WAXS). It was found that confinement effects are stronger when lower molecular weights of grafted MPEG are employed. These grafted MPEG chains are more difficult to stretch out on SiO2-NH2 surfaces than when they are free in the bulk polymer. Both crystallization temperature (Tc) and crystallinity of grafted MPEG chains decrease with reductions of grafting density. Additionally, covalent bonding effects and interfacial interaction confinement effects are strengthened by the decrease in grafting density, leading to an increase in decomposition temperature and to the disappearance of the self-nucleation Domain (i.e., Domain II), when self-nucleation experiments are performed by DSC. Overall isothermal crystallization kinetics was studied by DSC and the results were analyzed with the Avrami equation. An Avrami index of n≈3 was obtained for neat MPEG (indicating that instantaneous spherulites are formed). However, in the case of MPEG-g-SiO2 with the lowest grafting density, the Avrami index of (n) was less than 1 (first order kinetics or lower), indicating that nucleation is the determining factor of the overall crystallization kinetics, a signature for confined crystallization. At the same time, the crystallization from the melt for this MPEG-g-SiO2 with the lowest grafting density occurs at Tc ≈-30 ºC, a temperature close to the glass transition temperature (Tg) of MPEG, indicating that this confined MPEG crystallizes from homogeneous nuclei., This project was supported by the National Natural Science Foundation of China (21574141) and the Ministry of Science and Technology of China (2017YFE0117800). The authors gratefully acknowledge the funding of project BIODEST, Research and Innovation Staff Exchange (RISE) H2020-MSCA-RISE-2017-778092. The authors thank beamline BL16B1 (Shanghai Synchrotron Radiation Facility) for providing the beam time and helps during experiments.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Polyether Synthesis by Bulk Self-Condensation of Diols Catalyzed by Non-eutectic Acid Base Organocatalysts

  • Basterrechea Gorostiza, Andere
  • Gabirondo Amenabar, Elena
  • Jehanno, Coralie
  • Zhu, Haijin
  • Flores, Irma
  • Müller Sánchez, Alejandro Jesús
  • Etxeberria Lizarraga, Agustín
  • Mecerreyes Molero, David
  • Coulembier, Olivier
  • Sardon Muguruza, Haritz
Polyethers constitute a well-established class of polymers covering a wide range of applications from industrial man-ufacturing to nanomedicine. Nevertheless, their industrial implementation is limited to short chain aliphatic polyethers such as poly-ethyeleglycol (PEO or PEG), polypropyleneglycol (PPG) or polytetramethylenglycol (PTMG) produced by the ring-opening polymerization of the corresponding cyclic ethers. Herein we report a sustainable and scalable approach for the preparation of medium and long chain aliphatic polyethers by the melt self-polycondensation of aliphatic diols in the presence of non-eutectic acid base mixtures as organocatalyst. These organocatalysts were prepared by forming stoichiometric and non-stoichiometric complexes of methanesulfonic acid (MSA) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) as confirmed by NMR spectroscopy and DFT calcula-tions. The non-stoichiometric 2:1 and 3:1 MSA:TBD molar complexes showed superior thermal stability. These non-eutectic acid base mixtures were tested in the bulk-self condensation of 1,6-hexanediol leading to telechelic hydroxy-poly(oxyhexane). The optimized polymerization conditions involved the use of MSA:TBD (3:1) catalyst in a three step polycondensation process at 130 oC - 180 °C and 200 °C respectively. These conditions were applied to the synthesis of a wide range of aliphatic polyethers with a number of methylene units ranging from 6 to 12 units and molecular weights between 5,000 and 22,000 g mol-1. The aliphatic polyethers were highly semicrystalline with melting temperatures ranging from 55 to 85 °C. The synthesis approach was extended to the prepa-ration of value-added copolymers from different lenght chain diols and different functionality, giving rise to different copolymer architectures from linear copolyethers to polyether thermosets. Altogether, this straightforward polymerization strategy enables the access to medium-long chain and cross-linked aliphatic polyethers using easily prepared and recyclable organocatalysts., The authors thank the European Commission for its financial sup-port through the projects SUSPOL-EJD 642671. Haritz Sardon and David Mecerreyes gratefully acknowledge financial support from MINECO through project POLYCE. A. J. Müller, O. Coulembier and H. Sardon also acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). The au-thors also thank the technical and human support provided by Mrs. Sofia Guezala (SGIker) of UPV/EHU for the NMR analysis. H. Sardon, A.J. Müller and I. Flores acknowledge funding and beam time from ALBA Synchrotron facility thorugh the project: 2017092338 (2018). O.C is Research Associate for the F.R.S.-FNRS.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends

  • Fenni, Seif Eddine
  • Wang, Jun
  • Haddaoui, Nacerddine
  • Favis, Basil D.
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
Three semicrystalline polyesters, poly(lactic acid), poly(caprolactone) and poly(butylene succinate) (PLA, PCL and PBS) were melt blended to prepare binary and ternary systems of selected compositions. In binary blends with a sea-island morphology, each of the polymers is either the major or dispersed phase in the various samples. Analogously, different ternary blends with a “partial-wetting” morphology are prepared, displaying droplets of PLA, PCL or PBS minor phase located at the interface between the other two major components. The crystallization behaviour of the three phases has been investigated under non-isothermal conditions via differential scanning calorimetry. In binary blends, a distinct effect of morphology on nucleation was observed, with the minor phase displaying fractionated crystallization, as a consequence of the droplet concentration being higher than that of nucleating impurities. Partially-wetting droplets of the different polymers in ternary blend show instead non-isothermal crystallization analogous to the bulk material, due to the much larger domain size. The self-nucleation behaviour of the polyesters in the binary and ternary blends was then compared to that of the neat polymers. It was found that the very large number of self-nuclei generated by the self-nucleation protocol (in Domain II or self-nucleation Domain) applied to the samples, completely overrules any effect of blend type or composition, so that the crystallization temperature is exclusively related to the self-nucleation temperature. However, when melting memory is erased and sufficiently high melting temperatures are employed, the role of heterogeneous nucleation is apparent, and the crystallization of the given blend component is highly dependent on the particular morphology., Project H2020-MSCA-RISE-2017-778092 « BIODEST ».
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Isomorphic polyoxyalkylenes copolyethers obtained by copolymerization of aliphatic diols

  • Basterrechea Gorostiza, Andere
  • Gabirondo Amenabar, Elena
  • Flores, Irma
  • Etxeberria Lizarraga, Agustín
  • González Vives, Alba
  • Müller Sánchez, Alejandro Jesús
  • Mecerreyes Molero, David
  • Coulembier, Olivier
  • Sardon Muguruza, Haritz
Isomorphism in random copolymers occurs when comonomer units can crystallize within a single crystalline lattice in the entire composition range. This ideal behavior is rare in random copolymers and only a few examples of isomorphism are found in copolyesters and copolycarbonates. In this work, we show a series of polyoxyalkylenes copolyethers obtained by copolymerization of 1,6-hexanediol and 1,12-dodecanediol which are able to crystallize in the entire composition range and display an isomorphic behavior. The copolymers were synthesized via a bulk self-condensation method at high temperature, using a thermally stable Non-Eutectic Mixture Organocatalyst (NEMO) prepared from methanesulfonic acid (MSA) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). The final molar ratios of the copolyethers were calculated by 1H NMR spectroscopy and the random distribution of the two monomeric units was confirmed by 13C NMR spectroscopy. The effect of the composition of comonomer units on the crystalline structure was investigated by DSC and WAXS. The two comonomeric units along the chain can co-crystallize regardless of the composition, while displaying melting point values that vary linearly in between those of the parent homopolymers (54,9 and 84,7 °C). The crystalline reflections given by WAXS demonstrated that the two comonomers are miscible in the crystalline state and meet the general criteria to be regarded isomorphic random copolymers. Finally, a random terpolymer was synthetized from 1,6-hexanediol, 1,10-decanediol and 1,12-dodecanediol, which also shows a single melting temperature, thus demonstrating the versatility of the polymerization route employed., The authors thank the European Commission for its financial support through the projects SUSPOL-EJD 642671. Haritz Sardon and David Mecerreyes gratefully acknowledge financial support from MINECO through project POLYCE. A. J. Müller, O. Coulembier and H. Sardon also acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). The authors also thank the technical and human support provided by Mrs. Sofia Guezala (SGIker) of UPV/EHU for the NMR analysis. H. Sardon, A.J. Müller and I. Flores acknowledge funding and beam time from ALBA Synchrotron facility through the project: 2017092338 (2018). A. J. Müller gratefully acknowledges financial support from MINECO through project MAT2017-83014-C2-1-P. A. Etxeberria acknowledges financial support from the Basque Government (GIC IT-618-13). O. C. is Research Associate for the F.R.S.-FNRS. Irma Flores would like to acknowledge Conacyt (Mexico) for supporting her PhD studies with a scholarship.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Uniaxial and Mixed Orientations of Poly(ethylene oxide) in Nanoporous Alumina Studied by X-ray Pole Figure Analysis

  • Su, Cui
  • Shi, Guangyu
  • Li, Xiaolu
  • Zhang, Xiuqin
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
  • Liu, Guoming
The orientation of polymers under confinement is a basic, yet not fully understood phenomenon. In this work, the texture of poly(ethylene oxide) (PEO) infiltrated in nanoporous anodic alumina oxide (AAO) templates was investigated by X-ray pole figures. The influence of geometry and crystallization conditions, such as pore diameter, aspect ratio, and cooling rates, was systematically examined. All the samples exhibited a single, volume-dependent crystallization temperature (Tc) at temperatures much lower than that exhibited by bulk PEO, indicating “clean” microdomains without detectable heterogeneous nucleation. An “orientation diagram” was established to account for the experimental observations. Under very high cooling rates (quenching), crystallization of PEO within AAO was nucleation-controlled, adopting a random distribution of crystallites. Under low cooling rates, growth kinetics played a decisive role on the crystal orientation. A relatively faster cooling rate (10 °C/min) and/or smaller pores lead to the <120>* ║ pore axis (n⃗) mode (uniaxial orientation). When the cooling rate was lower (1 °C/min), and/or the pores were larger, a mixed orientation, with a coexistence of <120>* ║ n⃗ and <010>* ║ n⃗ , was observed. The results favor the kinetic model where the fastest growth direction tends to align parallel to the pore axis., This work is supported by the National Natural Science Foundation of China (NSFC, 21873109, 51820105005, 21274156). G. L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015026). G. L., D. W., and A. J. M. also acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). The authors thank Dr. Zhongkai Yang for assistance with pole figure measurement.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

How cyclic chain topology can reduce the crystallization rate of Poly(3- hexylthiophene) and promote the formation of liquid crystalline phases in comparison with linear analogue chains

  • Maiz, Jon
  • Liu, Guoming
  • Ruipérez Cillán, Fernando
  • Delbosc, Nicolas
  • Coulembier, Olivier
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
We have studied how cyclic topology affects the crystallization and morphology of π-conjugated poly(3- hexylthiophene) (P3HT) molecules by comparing linear and cyclic analogues for the first time, with three different chain lengths. We employ a range of experimental techniques including wide-angle X-ray scattering (WAXS), polarized light optical microscopy (PLOM), differential scanning calorimetry (DSC) and a combination of Polarized Light Optical Microscopy (PLOM) and Spectroscopy (S). The crystallization and melting points, melting/crystallization enthalpies, and overall crystallization kinetics of cyclic P3HTs are found to be substantially lower than their linear counterparts. The results are explained by the higher rigidity of cyclic molecules, as predicted by density functional theory (DFT) calculations, in the low molecular weight range explored here, in comparison with linear P3HT chains. Additionally, we have found that cyclic P3HT can form liquid crystalline phases above their crystalline melting points and a new crystal form at lower temperatures. PLOM, WAXS, DSC and PLOM/S results indicate that cyclic P3HTs display bipolar and concentric nematic textures that disappear at a well-defined nematic-isotropic transition temperature. Such liquid crystalline textures are completely absent in the linear P3HTs analogues studied here. We conclude that the cyclic topology induces the formation of liquid crystalline phases as the rigid P3HT oligomers can self-assemble above their crystalline melting temperatures., J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016. We acknowledge the help of Dr. Jaime Martín and Ms. Sara Marina with the combined Microscopy/Spectroscopy measurements. J.M. and A.J.M. acknowledge funding by Mineco MAT2017- 83014-C2-1-P project. N.D. and O.C. are grateful to the Science Policy Office of the Belgian Federal Government (PAI 7/5) and to the Belgian FRFC-FNRS (n°2.4508.12). O.C. is Research Associates of the F.R.S.-FNRS. G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015026). D.W. and A.J.M acknowledge the support from the National Natural Science Foundation of China (51820105005). All authors gratefully acknowledge the support of the EU through the H2020-MSCA-RISE-2017-778092 BIODEST project. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ, ERDF and ESF) is gratefully acknowledged for assistance and generous allocation of computational resources.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

  • Matxinandiarena Almandoz, Eider
  • Mugica Iztueta, Miren Agurtzane
  • Zubitur Soroa, María Manuela
  • Yus, Cristina
  • Sebastián, Víctor
  • Irusta, Silvia
  • David Loaeza, Alfonso
  • Santana, Orlando
  • Maspoch, Maria Lluisa
  • Puig, Cristian
  • Müller Sánchez, Alejandro Jesús
Titanium dioxide (TiO2) nanoparticles have recently appeared in PET waste because of the introduction of opaque PET bottles. We prepare polymer blend nanocomposites (PBNANOs) by adding hydrophilic (hphi), hydrophobic (hpho), and hydrophobically modified (hphoM) titanium dioxide (TiO2) nanoparticles to 80rPP/20rPET recycled blends. Contact angle measurements show that the degree of hydrophilicity of TiO2 decreases in the order hphi > hpho > hphoM. A reduction of rPET droplet size occurs with the addition of TiO2 nanoparticles. The hydrophilic/hydrophobic balance controls the nanoparticles location. Transmission electron microscopy (TEM_ shows that hphi TiO2 preferentially locates inside the PET droplets and hpho at both the interface and PP matrix. HphoM also locates within the PP matrix and at the interface, but large loadings (12%) can completely cover the surfaces of the droplets forming a physical barrier that avoids coalescence, leading to the formation of smaller droplets. A good correlation is found between the crystallization rate of PET (determined by DSC) and nanoparticles location, where hphi TiO2 induces the highest PET crystallization rate. PET lamellar morphology (revealed by TEM) is also dependent on particle location. The mechanical behavior improves in the elastic regime with TiO2 addition, but the plastic deformation of the material is limited and strongly depends on the type of TiO2 employed., This research was funded by the EU project REVALPET, POCTEFA EFA064-15 (Interreg VA). The UPV/EHU team gratefully acknowledges the financial contribution of the Basque Government through grant IT1309-19 and the funding of the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

The origin of memory effects in the crystallization of polyamides: Role of hydrogen bonding

  • Liu, Xinran
  • Wang, Yu
  • Wang, Zefan
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
  • Zhu, Ping
  • Zhao, Ying
  • Dong, Xia
  • Wang, Dujin
The effect of hydrogen bonding stability on the memory effects in the crystallization of long chain polyamides have been investigated by the self-nucleation calorimetric technique. Self-nucleation is characterized by three domains in decreasing temperature order: complete melting or Domain I, exclusive self-nucleation or Domain II and, self-nucleation and annealing or Domain III. The memory effect is observed in the high temperature range of Domain II (when all crystals are molten, or in Domain IIa). In the low temperature range of Domain II, crystal remnants act as self-seeds (i.e., Domain IIb). The hydrogen bonds between amide groups were detected with FTIR, and a ratio of the content of hydrogen bonded vs. free amide groups could be calculated. The energy needed to break the hydrogen bonds decreases as the self-nucleation temperature (Ts) increases. This means that hydrogen bonds become weaker (and their amount decrease), while the crystalline memory disappears upon crossing from Domain IIa to Domain I. Comparing the widths of Domain IIa in different polyamides, we found for the first time a clear correlation with the relative content of amide groups with respect to methylene groups in the repeat units. In conclusion, we have demonstrated that memory in polyamides is a strong function of hydrogen bonding between chain segments., This work was financially supported by the National Natural Science Foundation of China (No. 21574140) and the National Key R&D Program of China (No. 2017YFB0307600). The SSRF beamlines BL16B1 are acknowledged for kindly providing the beam time and assistance. We thank Dr. François Bouéfrom CEA UMR12 Lab Léon Brillouin-Orphée Neutron Reactor for the good discussion and help on this work. We also acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

ROP and crystallization behaviour of partially renewable triblock aromaticaliphatic copolymers derived from L-lactide

  • Flores, Irma
  • Martínez de Ilarduya, Antxon
  • Sardon Muguruza, Haritz
  • Müller Sánchez, Alejandro Jesús
  • Muñoz-Guerra, Sebastián
Two series of partially biobased ABA triblock copolyesters were successfully prepared by ring-opening polymerization (ROP) of L-lactide initiated by two telechelic polyester polyols using an organic catalyst. B blocks were made of telechelic poly(hexamethylene terephthalate) (PHT) and poly(hexamethylene 2,5- furandicarboxylate) (PHF), respectively, with average molar masses of around 3500 g mol-1 and A blocks were made of poly(lactic acid)s (PLA) of different block lengths. For each series, four copolymers with different PHT/PLA and PHF/PLA compositions were prepared by varying the feed molar ratios. The triblock structure of the obtained copolymers was ascertained by 13C NMR, which confirms that the organic catalyst employed does not promote transesterification reactions at the low temperatures used for the reaction. All copolyesters were thermally stable under inert atmosphere up to around 300 °C. For all synthesized copolyesters, the PLA blocks were unable to crystallize, mainly due to racemization reactions taking place during L-lactide ROP. Both, PHT and PHF blocks were able to crystallize and their thermal and structural properties (Tm, Tc, Xc and lamellar thickness) were independent on PLA content until its concentration was very high and topological restrictions difficulted crystallization. According to SAXS, most copolymers were found to be miscible in the melt. Both PLA-b-PHT-b-PLA or PLA-b-PHF-b-PLA triblock copolymers showed a single Tg indicating that the components are miscible in the amorphous state., The POLYMAT/UPV/EHU team would like to acknowledge funding from MINECO through project: MAT2017-83014-C2-1-P, and from ALBA synchrotron facility. We also acknowledge the financial contribution of the Basque Government through grant IT1309-19 and the funding of the European Uniońs Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 778092. Irma Flores would like to acknowledge CONACYT (Mexico) for the Ph.D. grant awarded.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Nucleation of Poly(lactide) on the Surface of Different Fibers

  • Wang, Bao
  • Wen, Tao
  • Zhang, Xiuqin
  • Tercjak Sliwinska, Agnieszka
  • Dong, Xia
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
  • Cavallo, Dario
Unformatted post-print version of the accepted article, The nucleation process of poly(lactide) (PLA) on a series of fibers was studied by means of in-situ Polarized Optical Microscope (POM) during crystallization. Several synthetic and natural fibers (PLLA stereocomplex fibers (SC), PET, carbon, Kevlar, glass, hemp, linen and cellulose) were employed, and compared to custom-spun fiber of stereocomplex enantiomeric PLA blend. Meaningful differences in the nucleating ability towards PLA could be found for all the considered fibers. Stereocomplex PLA fibers display extremely high nucleating efficiency, with the development of a continuous transcrystalline morphology on their surface, up to high crystallization temperatures. Quantitative measurement of the nucleation rate allowed a comparison of the different fiber substrates in the light of classical heterogeneous nucleation theory, by considering the interfacial free energy difference parameter, Δσ, directly related to the nucleation barrier. The topography of the fibers surface was investigated by atomic force microscopy (AFM), and tentatively related to the measured nucleation ability. While a general effect of surface roughness on lowering the heterogeneous nucleation energy barrier can be deduced, deviations can be observed, in particular for carbon and stereocomplex PLA fibers. The different fiber wettability by PLA melt suggests that chemical interactions between the substrate and the crystallizing polymer also play a meaningful role in promoting the nucleation, although this aspect is generally disregarded in the literature - in favor of surface roughness. Moreover, the specific surface topography is shown to largely affect the density of available nucleation sites along the fiber., B.W. thanks the China Scholarship Council (CSC) for funding his Ph.D scholarship.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 778092. A.J.M. acknowledges the financial support from Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-1-P).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Influence of Chemical Structures on Isodimorphic Behavior of Three Different Copolycarbonate Random Copolymer Series

  • Arandia Ariño, Idoia
  • Meabe Iturbe, Leire
  • Aramburu Ocáriz, Nora
  • Sardon Muguruza, Haritz
  • Mecerreyes Molero, David
  • Müller Sánchez, Alejandro Jesús
Three series of aliphatic random copolycarbonates, poly(heptane-co-dodecane carbonate) P7C-P12C, poly(butane-co-dodecane carbonate) P4C-P12C and poly(butane-co-heptane carbonate) P4C-P7C, were synthesized by two-step polycondensation process. The organocatalyst 4-(dimethylamino) pyridine (DMAP) was used for the first time to prepare copolycarbonates, as an alternative to metal catalysts, to avoid the toxicity of the remaining catalysts impurities that are difficult to remove after synthesis. Differential scanning calorimeter studies demonstrated the isodimorphic character of the copolycarbonates showing pseudo-eutectic points and the crystallization in a wide composition range. Wide angle X-ray scattering (WAXS) results displayed changes in crystallographic plane spacings possibly due to the isodimorphic behavior of the systems. Two double crystalline copolymers were obtained, i.e., 85/15 P4C-P12C and 80/20 P7C-P12C, as they correspond to pseudo-eutectic compositions. Remarkably, for the 80/20 P7C-P12C copolycarbonate, we found a novel behavior. This copolymer exhibits both coincident crystallization and coincident melting during non-isothermal DSC runs. However, WAXS revealed that the material is double crystalline as it contains crystals from P7C-rich and P12C-rich phases. This is the first example of a double crystalline polymeric material that exhibits a single crystallization and a single melting peak, in spite of being double crystalline. Comparing the results obtained for the 3 series of copolycarbonates, we can conclude that it is easier to incorporate a shorter repeating unit chain segment in a crystal formed by a larger repeating unit chain segment., We acknowledge funding from the European Union´s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 778092 and from MINECO, project: MAT2017-83014-C2-1-P. The financial contribution of the Basque Government through grant IT1309-19 is gratefully acknowledged. We also thank ALBA Synchrotron facility for providing funding and beam time through the project: 2018072905 and the fellowship from the University of the Basque Country UPV/EHU.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

How Confinement Affects the Nucleation, Crystallization, and Dielectric Relaxation of Poly(butylene succinate) and Poly(butylene adipate) Infiltrated within Nanoporous Alumina Templates, How confinement affects the nucleation, crystallization and dielectric relaxation of poly(butylene succinate) and poly(butylene adipate) infiltrated within nanoporous alumina templates

  • Safari, Maryam
  • Maiz, Jon
  • Shi, Guangyu
  • Juanes, Diana
  • Liu, Guoming
  • Wang, Dujin
  • Mijangos, Carmen
  • Alegría Loinaz, Angel María
  • Müller Sánchez, Alejandro Jesús
This work describes the successful melt infiltration of poly(butylene succinate) (PBS) and poly(butylene adipate) (PBA) within 70 nm diameter anodic aluminum oxide (AAO) templates. The infiltrated samples were characterized by SEM, Raman, and FTIR spectroscopy. The crystallization behavior and crystalline structure of both polymers, bulk and confined, were analyzed by differential scanning calorimetry (DSC) and grazing incidence wide angle x-ray scattering (GIWAXS). DSC revealed that a change in the nucleation process occurred from heterogeneous nucleation for bulk samples, to homogeneous nucleation for infiltrated PBA, and to surface-induced nucleation for infiltrated PBS. GIWAXS results indicate that PBS nanofibers crystallize in the α-phase, as well as their bulk samples. However, PBA nanofibers crystallize just in the β-phase, whereas PBA bulk samples crystallize in a mixture of α- and β-phases. The crystal orientation within the pores was determined, and differences between PBS and PBA were also found. Finally, broadband dielectric spectroscopy (BDS) was applied to study the segmental dynamics for bulk and infiltrated samples. The glass temperature was found to significantly decrease in the PBS case upon infiltration while that of PBA remained unchanged. These differences were correlated with the higher affinity of PBS to the AAO walls as compared to PBA, in accordance with their nucleation behavior (surface-induced versus homogeneous nucleation respectively)., POLYMAT and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-1-P and MAT2017-83014-C2-2-P). M.S. gratefully acknowledges the award of a PhD fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016. G.L, D.W., and A.J.M acknowledge the support from the National Natural Science Foundation of China (51820105005, 21873109) and National Key R&D Program of China (2017YFE0117800). G.L. acknowledges the support from the Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015026). This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 778092. The UPV/EHU team gratefully acknowledges the financial contribution of the Basque Government through grants IT1309-19 and IT1175- 19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Tailoring the isothermal crystallization kinetics of isodimorphic poly (butylene succinate-ran-butylene azelate) random copolymers by changing composition

  • Arandia Ariño, Idoia
  • Zaldua, Nerea
  • Maiz, Jon
  • Pérez Camargo, Ricardo Arpad
  • Mugica Iztueta, Miren Agurtzane
  • Zubitur Soroa, María Manuela
  • Mincheva, Rosica
  • Dubois, Philippe
  • Müller Sánchez, Alejandro Jesús
A detailed isothermal crystallization study of biobased and biodegradable isodimorphic poly (butylene succinate-ran-butylene azelate) random copolyesters (PBS-ran-PBAz) with a wide composition range has been carried out to determine nucleation kinetics, spherulitic growth rates and overall crystallization kinetics. Differential Scanning Calorimetry (DSC) and Polarized Light Optical Microscopy (PLOM) analysis show that for the PBS-rich phase, the incorporation of BAz comonomer leads to a significant increase in nucleation density and a decrease in spherulitic growth. On the contrary, for the PBAz-rich phase, an antinucleating effect of the incorporation of BS comonomer has been observed. Both effects agree with the thermodynamic analysis of the equilibrium melting point depression as a function of composition, which predicts that only a small amount of BAz comonomer is included within the PBS-rich crystals and a larger amount of comonomer is included in PBAz-rich crystals. In addition, the enthalpy of melting of 100% crystalline PBS and PBAz were determined by a different practical approach: extrapolating real time synchrotron Wide Angle X-ray Scattering (WAXS) isothermal crystallization data and isothermal DSC data., I.A. gratefully acknowledges the award of a PhD fellowship by UPV/EHU. J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa. R.M and Ph.D. thank the Belgian Federal Government Office of Science Policy (SSTC- PAI 6/27) for general support and are much indebted to both Wallonia and the European Commission “FSE and FEDER” for financial support in the frame of SYNOPLISS-POLYTISS and LCFM-BIOMAT projects. The POLYMAT/UPV/EHU team would like to acknowledge funding from MINECO through project: MAT2017-83014-C2-1-P, and from ALBA synchrotron facility through granted proposal 2018022683. Finally, we also acknowledge funding by the European Union′s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Segmental Dynamics Govern the Cold Crystallization of Poly(lactic acid) in Nanoporous Alumina

  • Shi, Guangyu
  • Guan, Yu
  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
How segmental mobility influences the crystallization behavior of polymers in confined spaces is still not fully understood. In the present work, a systematic study of the segmental dynamics was carried out by dielectric relaxation spectroscopy (DRS) on racemic poly(DL-lactic acid) (PDLLA) confined in nanoporous alumina. The effect of pore size and thermal history were examined. Two glass transition temperatures (Tg) were observed, and an unusual “hysteresis” of the segmental relaxation time was detected. At lower temperatures, the segmental mobility of PDLLA “speeds up” firstly and “slows down” upon annealing. Both effects indicate the dynamically heterogeneous and nonequilibrium nature of chain segments under confinement. The “equilibrating process” of the relaxation time was monitored by DRS and the characteristic time exhibited Arrhenius behavior. The experimental evidence supports a reversible adsorption/desorption mechanism of chain segments. The enhanced cold crystallization of poly(lactic acid) (PLLA) we reported previously (Macromolecules 2015, 48 (8), 2526-2533) can be explained adequately with the “enhanced mobility” of segments. This was further justified by the shift of the cold crystallization temperature towards high temperatures of infiltrated PLLA after annealing., This work is supported by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21873109, 51820105005). G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015026) and the Open Research Fund of State Key Laboratory of Polymer Physics and Chemistry (CIAC) (201510). A.J.M. gratefully acknowledges the financial support from MINECO through project MAT2017-83014-C2-1-P. G.L., D.W., and A.J.M. acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). G.S. thanks Dr. Wensheng Bu for assistance with the DRS measurement.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Organocatalyzed Polymerization of PET-mb-poly(oxyhexane) Copolymers and Their Self-Assembly into Double Crystalline Superstructures

  • Flores, Irma
  • Basterrechea Gorostiza, Andere
  • Etxeberria Lizarraga, Agustín
  • González Vives, Alba
  • Ocando, Connie
  • Vega, Juan Francisco
  • Martínez-Salazar, Javier
  • Sardon Muguruza, Haritz
  • Müller Sánchez, Alejandro Jesús
Double crystalline multi-block copolymers exhibit two well-defined melting temperatures associated with the two phases formed by their constituent blocks. The crystalline superstructure formed in these copolymers is complex and depends on the miscibility of both comonomers. In this work, an innovative series of double crystalline Poly(ethylene terephthalate)-mb-poly(oxyhexane) multiblock copolymers were prepared in one pot. Previously synthesized low molecular weight poly(oxyhexane) telechelic diol and poly(ethylene terephthalate) oligomers were reacted by transesterification using an organic catalyst (DBU:BA), in a solvent-free process. The copolymerization was demonstrated by 1H NMR and 13C NMR spectroscopies and the random distribution of poly(oxyhexane) chains was confirmed. We found that all compositions exhibited double crystallinity, but the crystallization of the copolymers was strongly affected by PET/poly(oxyhexane) composition. When PET content in the copolymer decreases, the crystallization and melting temperatures of the poly(oxyhexane) phase decrease as well as its crystallization rate. Poly(oxyhexane) content increases induce similar changes in the PET phase. PET and poly(oxyhexane) chain segments form a one-phase melt according to SAXS. When the material is cooled from the melt, the PET phase crystallizes first (at higher temperatures) forming superstructural (micron size spherulites) templates. Upon further cooling, the crystallization of poly(oxyhexane) lamellae occurs, within the interlamellar regions of PET spherulitic templates. Furthermore, during crystallization of the copolymer, the amorphous regions of both components undergo phase separation, as evidenced by the presence of two Tgs. PLOM/AFM studies were performed and demonstrated the presence of micro-spherulitic morphology in the whole composition range. Considering all results, including temperature-dependent synchrotron SAXS/WAXS, we demonstrate the ability of poly(oxyhexane) to crystallize upon cooling within the previously formed PET spherulitic templates. Hence, these copolymers form complex double crystalline spherulitic superstructures which contain two amorphous and two crystalline interlamellar phases., We acknowledge funding by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778092. We also acknowledge funding by MINECO through project MAT2017-83014-C2-1-P. I.F. would like to acknowledge CONACYT (Mexico) for the Ph.D. grant awarded. We also acknowledge the contribution of Ms. Sofía Guezala for her help with the NMR measurements and Dr. Itxaso Calafel for her help with the DMTA measurements.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Generating Triple Crystalline Superstructures in Melt Miscible PEO-b-PCL-b-PLLA Triblock Terpolymers by Controlling Thermal History and Sequential Crystallization

  • Palacios Gutiérrez, Jordana Karin
  • Liu, Guoming
  • Wang, Dujin
  • Hadjichristidis, Nikos
  • Müller Sánchez, Alejandro Jesús
The morphology, crystallization behavior and properties of multi-crystalline polymer systems based on triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers are reviewed. The triblock terpolymers, with increasing PLLA content, exhibited a triple crystalline nature. Upon cooling from melt, the PLLA block crystallizes first and templates the spherulitic morphology of the terpolymer. Then, the PCL block crystalizes and, lastly, the PEO block. These triblock terpolymers are probably melt miscible, as SAXS experiments confirmed. Thus, the crystallization of PCL and PEO blocks takes place within the interlamellar zones of the PLLA spherulites that were formed previously. Therefore, the lamellae of PLLA, PCL and PEO exist side-by-side within a unique spherulite, constituting a novel triple crystalline superstructure. The theoretical analysis of SAXS curves implies that only one lamella of either PCL or PEO can occupy the interlamellar space in between two contiguous lamellae of PLLA. Several complex competitive effects such as plasticizing, nucleation, anti-plasticizing and confinement take place during the isothermal crystallization of each block in the terpolymers. New results on how Successive Self-nucleation and Annealing (SSA) thermal treatment can be used as an additional suitable technique to properly separate the three crystalline phases in these triple crystalline triblock terpolymers are also included in this contribution., The POLYMAT/UPV/EHU team would like to acknowledge funding from MINECO through project: MAT2017-83014-C2-1-P, and from ALBA synchrotron facility. We also acknowledge funding by the European Union´s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 778092. The support of the National Key R&D Program of China (2017YFE0117800) is also gratefully acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Chemical Structure Drives Memory Effects in the Crystallization of Homopolymers

  • Sangroniz Agudo, Leire
  • Sangroniz Agudo, Ainara
  • Meabe Iturbe, Leire
  • Basterrechea Gorostiza, Andere
  • Sardon Muguruza, Haritz
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, Although the study of melt memory has attracted much interest, the effect of polymer chemical structure on its origin has not been fully elucidated. In this work, we study melt memory effects by Differential Scanning Calorimetry employing a self-nucleation protocol. We use homologous series of homopolymers containing different polar groups and different number of methylene groups in their repeating units: polycarbonate, polyesters, polyethers and polyamides. We show that melt memory in homopolymers is generally controlled by the strength of the intermolecular interactions. The incorporation of methylene groups reduces melt memory effects by decreasing the strength of segmental chain interactions, which is reflected by the decrease in dipolar moments and solubility parameters. This work presents for the first time a unified view of the melt memory effects in different homopolymers., We acknowledge funding from MINECO MAT2017-83014-C2-1-P project, and from the Basque Government through grant IT1309-19. L. S acknowledges FPU predoctoral grant and the postdoctoral grant from Basque Governnment. We would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Competition between nucleation and confinement in the crystallization of poly(ethylene glycol)/ large aspect ratio hectorite nanocomposites

  • Habel, Christoph
  • Maiz, Jon
  • Olmedo Martínez, Jorge L.
  • López, Juan V.
  • Breu, Josef
  • Müller Sánchez, Alejandro Jesús
Unformatted preprint version of the submitted article, The overall crystallization kinetics of polymer nanocomposites is determined by nucleation and crystal growth, which are both greatly affected by confinement. Heterogeneous nucleation is influenced by the interphase area between filler and polymer matrix. Starting with a homogeneous nematic aqueous dispersion of a mixture containing polyethylene glycol (PEG) and varying amounts of a high aspect ratio layered silicate (hectorite, Hec), nanocomposite films were casted displaying a systematic variation of the degree of PEG confinement. This is achieved by a partial phase segregation upon drying, where independently of filler content a thermodynamically stable, 1 dimensional crystalline hybrid with constant volume of intercalated PEG (0.81 nm corresponding to a fraction 75 wt% and 55 vol%, respectively) is formed. This intercalated hybrid phase is incorporated into segregated PEG domains. The segregation is a kinetically controlled process and the length scale of segregation increases with PEG available in surplus of the hybrid. Due to the very large lateral extension of the Hec, the segregated domains are increasingly two dimensional. As evidenced by transmission electron micrographs and powder X-ray diffraction, the segregation produces composite structures where, in dependency of filler content, PEG slabs of different thickness are separated by domains of the intercalated hybrid material. The crystallization behavior of these bi-phasic materials was investigated by Differential Scanning Calorimetry (DSC) and Polarized Light Optical Microscopy (PLOM). DSC results reveal a competition between the nucleating effect of Hec, which was particularly important at low amounts, and the PEG confinement effect at higher filler loadings. Applying a self-nucleation protocol, the nucleation efficiency of the hectorite was shown to be up to 67%. The isothermal crystallization kinetics accelerated at low Hec contents (nucleation), went through a maximum and then decreased (confinement) as Hec content increased. Additionaly, a clear correlation between filler content and the Avrami index was obtained supporting the increase in confinement as filler loading increased., The authors thank Florian Puchtler for producing the synthetic sodium hectorite, Marco Schwarzmann for the SEM and TEM measurements and sample preparation via cryo ion slicing, and Dr. Sabine Rosenfeldt for the SAXS measurements. We appreciate the support of the Keylab for Optical and Electron Microscopy and the Keylab for Small Scale Polymer Processing of the Bavarian Polymer Institute (BPI). This work was supported by the German Science Foundation (DFG) within the collaborative research project SFB 1357. J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and partial financial support to the IBERDROLA Foundation. J.L.O.M. wish to thank the National Council of Science and Technology (CONACYT) in México for his grant 471837. We acknowledge funding by Mineco MAT2017-83014-C2-1-P project and by the Basque Government through grant IT1309-19. This work has also received funding from the European Union´s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Study of the interlayer adhesion and warping during material extrusion-based additive manufacturing of a carbon nanotube/biobased thermoplastic polyurethane nanocomposite

  • Candal, María Virginia
  • Calafel Martínez, Miren Itxaso
  • Fernández San Martín, Mercedes
  • Aramburu Ocáriz, Nora
  • Hernández Aguirresarobe, Roberto
  • Guerrica Echevarría Estanga, Gonzalo María
  • Santamaría Ibarburu, Pedro Antonio
  • Müller Sánchez, Alejandro Jesús
Sustituido preprint por postprint 03-05-2023, A thermoplastic bio-polyurethane from renewable sources (TPU) and the nanocomposite developed by mixing it with carbon nanotubes (CNT) are investigated as potentially adequate for Material Extrusion-based Additive Manufacturing (EAM). Thermal and rheological features are studied from the perspective of their liaisons with printing adequacy and conditions. As predicted by rheology, both samples show good performance in filament elaboration and flow in the nozzle. Warpage is observed for TPU, but not for the nanocomposite, which is due to the effect of CNT nanoparticles on polymer chains dynamics. At the studied printing velocities, interlayer adhesion strength is independent of printing velocity implying that there is no significant chain orientation which can induce changes in the TPU entanglements. The nanocomposite shows a lower welding strength, notwithstanding both have the same chain entanglements density. This is explained by considering that the higher viscosity of TPU/CNT, as compared to TPU, reduces the melt diffusion coefficient., We would like to thank the financial support provided by the BIODEST project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. This work has also received funding from MINECO through project MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Thermo-rheological effects on succesful 3D printing of biodegradable polyesters

  • Candal, María Virginia
  • Calafel Martínez, Miren Itxaso
  • Aramburu Ocáriz, Nora
  • Fernández San Martín, Mercedes
  • Guerrica Echevarría Estanga, Gonzalo María
  • Santamaría, Antxon
  • Müller Sánchez, Alejandro Jesús
Sustituido preprint por postprint 03-05-2023, Biodegradable polybutylene succinate (PBS) and poly (butylene succinate-ran-adipate) (PBSA) were characterized to find the thermo-rheological bases for 3D printing by Fused Filament Fabrication (FFF). In dynamic viscoelastic measurements, the samples fulfilled time-temperature superposition and Cox Merz rule. The viscosity results were linked to the excellent filaments obtained and the observed good flow in the printer nozzle. Using specific tearing experiments, outstanding welding of the printed layers was obtained. Results were discussed considering the values of the entanglements density obtained by SAOS measurements. The main difference between both polymers was observed in the final production of 3D printed parts because the high crystallinity of PBS produced significant warpage, which prevented its use for practical purposes. On the contrary, the less crystalline PBSA random copolymer showed excellent performance during FFF. Thus, dimensionally stable and ductile printed objects were obtained, opening new processing routes for semi-crystalline biodegradable polyesters., This work has received funding from the European Union´s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092, from MINECO, project: MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Synthesis, Structure, Crystallization and Mechanical Properties of Isodimorphic PBS-ran-PCL Copolyesters

  • Safari, Maryam
  • Otaegi Tena, Itziar
  • Aramburu Ocáriz, Nora
  • Guerrica Echevarría Estanga, Gonzalo María
  • Martínez de Ilarduya, Antxon
  • Sardon Muguruza, Haritz
  • Müller Sánchez, Alejandro Jesús
Isodimorphic behavior is determined by partial inclusion of comonomer segments within the crystalline structure and arises from the comparatively similar repeating chain units of the parental homopolymers. Isodimorphic random copolymers are able to crystallize irrespective of their composition and exhibit a pseudo-eutectic behavior when their melting point values are plotted as a function of comonomer content. At the pseudo-eutectic point or region, two crystalline phases can coexist. On the right-hand and the left-hand side of the pseudo-eutectic point or region, only one single crystalline phase can form which is very similar to the crystalline structures of the parent homopolymers. This article aims to study the synthesis method, structure, crystallization behavior and mechanical properties of isodimorphic random PBS-ran-PCL copolyesters. Moreover, this study provides a comprehensive analysis of our main recent results on PBS-ran-PCL random copolyesters with three different molecular weights. The results show that the comonomer composition and crystallization conditions are the major factors responsible for the crystalline morphology, crystallization kinetics and mechanical performance of isodimorphic random copolyesters. Our studies demonstrate that in the pseudo-eutectic region, where both crystalline phases can coexist, the crystallization conditions determine the crystalline phase or phases of the copolymer. The relationships between the comonomer composition and mechanical properties are also addressed in this work., This research received the financial support from the BIODEST project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. We also acknowledge funding from MINECO through grant MAT2017-83014-C2-1-P, and from the Basque Government through grant IT1309-19. This research was funded by ALBA synchrotron facility through granted proposal 2018082953.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Suppression of the Self-Nucleation Effect of Semicrystalline Polymers by Confinement

  • Wang, Ming
  • Li, Jing
  • Shi, Guangyu
  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Wang, Dujin
Unformatted post-print version of the accepted article, The melt memory effect is well-known in polymer crystallization. It is caused by self-nuclei that persist above the melting temperature. The origin and physical nature of self-nuclei are still under debate. In this work, we studied the effect of confinement on the self-nucleation behavior of two typical semicrystalline polymers: poly(ε-caprolactone) (PCL) and poly(butylene succinate) (PBS) using anodic aluminum oxide (AAO) templates. The density of AAO nanopores covers a range of 1011 ~ 1013 cm-3. Narrowing of the self-nucleation region (Domain II) with a decrease of AAO diameter was observed for both infiltrated PCL and PBS, indicating the suppression of the self-nucleation effect. When the diameter of AAO is below 60 nm, Domain II vanished. Further analysis indicated that Domain IIa (melt memory region) vanished first, followed by Domain IIb (self-seeding region). The results provide a method of estimating the self-nuclei density of different polymers at different temperatures., This work was supported by the National Natural Science Foundation of China (21873109, 51820105005, and 21922308) and the National Key R&D Program of China (2017YFE0117800). We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778092. G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Polycaprolactone Adsorption and Nucleation onto Graphite Nanoplates for Highly Flexible, Thermally Conductive, and Thermomechanically Stiff Nanopapers

  • Li, Kun
  • Battegazzore, Daniele
  • Pérez Camargo, Ricardo Arpad
  • Liu, Guoming
  • Monticelli, Orietta
  • Müller Sánchez, Alejandro Jesús
  • Fina, Alberto
[EN] Free-standing nanopapers based on graphene and its related materials have been widely studied and proposed for flexible heat spreader applications. Given that these materials are typically brittle, this work reports the exploitation of polycaprolactone (PCL) as a polymer binder to enhance resistance and flexibility of nanopapers based on graphite nanoplates (GNP), while maintaining a high thermal conductivity. Properties of nanopapers appear to correlate with the excellent PCL adhesion and strong nucleation of the surface of GNP flakes. Furthermore, different crystalline populations were observed for PCL within the nanopaper and were investigated in detail via differential scanning calorimetry advanced techniques and X-ray diffraction. These demonstrated the coexistence of conventional unoriented PCL crystals, oriented PCL crystals obtained as a consequence of the strong nucleation effect, and highly stable PCL fractions explained by the formation of crystalline pre-freezing layers, the latter having melting temperatures well above the equilibrium melting temperature for pristine PCL. This peculiar crystallization behavior of PCL, reported in this paper for the first time for a tridimensional structure, has a direct impact on material properties. Indeed, the presence of high thermal stability crystals, strongly bound to GNP flakes, coexisting with the highly flexible amorphous fraction, delivers an ideal solution for the strengthening and toughening of GNP nanopapers. Thermomechanical properties of PCL/GNP nanopapers, investigated both on a heating ramp and by creep tests at high temperatures, demonstrated superior stiffness well above the conventional melting temperature of PCL. At the same time, a thermal conductivity > 150 W/m·K was obtained for PCL/GNP nanopapers, representing a viable alternative to traditional metals in terms of heat dissipation, while affording flexibility and light weight, unmatched by conventional thermally conductive metals or ceramics. Besides the obtained performance, the formation of polymer crystals that are stable above the equilibrium melting temperature constitutes a novel approach in the self-assembly of highly ordered nanostructures based on graphene and related materials., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme, Grant Agreement 639495─INTHERM─ERC-2014-STG. The China Scholarship Council is gratefully acknowledged for funding of the Ph.D. grant for K.L. The authors gratefully acknowledge Julio Gomez at Avanzare Innovación Tecnólogica S.L. for kindly providing GNP. R.A.P.-C. is supported by PIFI of the Chinese Academy of Science for international postdoctoral researchers (2019PE0004), and the China Postdoctoral Science Foundation (2020M670462). G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). The authors would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 778092. A.J.M. acknowledges funding from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Rheology and Tack Properties of Biodegradable Isodimorphic Poly(butylene succinate)-Ran-Poly(ε-caprolactone) Random Copolyesters and Their Potential Use as Adhesives

  • Sandoval, Aleida J.
  • Fernández San Martín, Mercedes
  • Candal, María Virginia
  • Safari, Maryam
  • Santamaría Ibarburu, Pedro Antonio
  • Müller Sánchez, Alejandro Jesús
The sole effect of the microstructure of biodegradable isodimorphic poly(butylene succinate)-ran-poly(ε-caprolactone) random copolyesters on their rheological properties is investigated. To avoid the effect of molecular weight and temperature, two rheological procedures are considered: the activation energy of flow, Ea, and the phase angle versus complex modulus plots. An unexpected variation of both parameters with copolyester composition is observed, with respective maximum and minimum values for the 50/50 composition. This might be due to the peculiar chain configurations of the copolymers that vary as a function of comonomer distribution within the chains. The same chain configuration variations are responsible for the isodimorphic character of the copolymers in the crystalline state. Tack tests, performed to study the viability of the copolyesters as environmentally friendly hot melt adhesives (HMA), reveal a correlation with rheological results. Tackiness parameters, particularly the energy of adhesion obtained from stress-strain curves during debonding experiments, are enhanced as melt elasticity increases. Based on the carried-out analysis, the link microstructure-rheology-tackiness is established, allowing selecting the best performing HMA sample considering the polymer chemistry of the system., We acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 778092. This work has also received funding from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Fractionated crystallization in semicrystalline polymers

  • Sangroniz Agudo, Leire
  • Wang, Bao
  • Su, Yunlan
  • Liu, Guoming
  • Cavallo, Dario
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
Sustituido preprint por postprint 03-05-2023, The crystallization of heterogeneously nucleated bulk polymers typically occurs in a single exothermic process, within a narrow temperature range, i.e., a single exothermic peak is detected by Differential Scanning Calorimetry when the material is cooled from the melt. However, when a bulk semicrystalline polymer is subdivided or dispersed into a multitude of totally (or partially) isolated microdomains (e.g., droplets or cylinders), in number comparable to that of commonly available nucleating heterogeneities, several separated crystallization events are typically observed, i.e., fractionated crystallization. This situation is often found for the minor crystallizable component in immiscible blends. When the bulk polymer is dispersed into a number of microdomains that is several orders of magnitude higher than the available number of heterogeneities within it, most microdomains will be heterogeneity-free. In these clean microdomains the nucleation can occur by contact with the interfaces (i.e., surface nucleation) or by homogeneous nucleation inside the microdomain volume. These cases can be easily encountered in cylinders or spheres within strongly segregated block copolymers, or in infiltrated polymers within nanopores of alumina templates. In this work, a comprehensive review of the known cases of fractionated crystallization is provided. The changes upon decreasing microdomain sizes from a dominant single heterogeneous nucleation, through fractionated crystallization, to surface or homogeneous nucleation are critically reviewed. Emphasis is placed on the common features of the phenomenon across the different systems, and thus on the general conclusions that can be drawn from the analysis of representative semicrystalline polymers. The origin of the fractionated crystallization effects and their dramatic consequences on the nucleation and crystallization kinetics of semicrystalline polymers are also discussed., We acknowledge the financial support from the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21873109 and 21922308). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 778092. This work has also received funding from MINECO, project: MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). L.S. acknowledges the postdoctoral grant from Basque Government.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization of a Self-Assembling Nucleator in Poly(L-lactide) Melt

  • Wang, Wei
  • Saperdi, Angelo
  • Dodero, Andrea
  • Castellano, Maila
  • Müller Sánchez, Alejandro Jesús
  • Dong, Xia
  • Wang, Dujin
  • Cavallo, Dario
[EN]In the present work, crystallization of a soluble nucleator N, N′, N″-tricyclohexyl-1,3,5-benzenetricarboxylamide (TMC-328) in a poly(l-lactic acid) (PLLA) matrix has been studied at different temperatures. Based on the change in solubility with temperature, different levels of supersaturation of TMC-328 in a PLLA matrix can be obtained. This nucleator presents a fibrous structure produced via self-assembling and develops into an interconnected network when the temperature is lowered. The TMC-328 crystal nuclei density is quantified via optical microscopy, using the average distance of the adjacent fibrillar structure, which shows a steady decrease with the decrease in temperature. The crystallization rates of TMC-328 were assessed through rheological measurements of network formation. Both fibrils’ density and crystallization kinetics display a power law dependence on supersaturation. For the first time, the solid–melt interfacial energy, the size of the critical nucleus, and the number of molecules making up the critical nucleus of the nucleator TMC-328 in the PLLA matrix have been determined by adopting the classical nucleation theory. The subsequent crystallization of PLLA induced by this nucleator was investigated as a function of the fibrils’ spatial density. The crystallization rate of PLLA is enhanced with the increase in the TMC-328 fibrils’ density because of the availability of a larger nucleating surface. The self-assembled fibril of TMC-328 can serve as shish to form a hybrid shish-kebab structure after the crystallization of PLLA, regardless of the number of nucleation sites., W.W. thanks the China Scholarship Council (CSC) for funding his Ph.D. scholarship. We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Nucleation modalities in poly(lactide), poly(butylene succinate) and poly(ε-caprolactone) ternary blends with partial wetting morphology

  • Fenni, Seif Eddine
  • Wang, Jun
  • Haddaoui, Nacerddine
  • Favis, Basil D.
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
Unformatted post-print version of the accepted article, Ternary biodegradable polymer blends of poly(lactic acid) (PLA), poly(butylene succinate) (PBS), and poly(ε‐caprolactone) (PCL) with the composition 45/10/45 wt% and exhibiting partial‐wetting morphology were prepared. In this morphology, the minor phase is present as self‐assembled droplets at the co‐continuous interface of the other two major phases. The crystallization of the components in the various blends was thoroughly investigated. Differential scanning calorimetry highlighted minor differences in the overall kinetics of a given component in the ternary blend, with respect to the neat polymer. On the other hand, several unusual nucleation mechanisms could be studied by polarized optical microscopy (PLOM). With reference to the major phases, PLA spherulites displayed surface‐induced nucleation from the interface with molten PBS or PCL droplets. On lowering the crystallization temperature, the PBS phase effectively nucleated at the interface with previously crystallized PLA domains, forming a transcrystalline morphology. Concerning the minor phase, weak partial‐wetting PBS droplets displayed a droplet‐to‐droplet percolation of the nucleation events. Strongly partial‐wetting PCL droplets were confined between previously crystallized PLA and PBS co‐continuous phases and, instead, solidified as isolated domains randomly in space. This work provides further insights in the relationship between morphology and crystallization in immiscible ternary blends., We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. We would also like to acknowledge funding from MINECO through project MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Direct Identification of Three Crystalline Phases in PEO-b-PCL-b-PLLA Triblock Terpolymer by In Situ Hot-Stage Atomic Force Microscopy

  • Palacios, Jordana K
  • Zhang, Heng
  • Zhang, Bin
  • Hadjichristidis, Nikos
  • Müller Sánchez, Alejandro Jesús
Sustituido el preprint por el postprint 03-05-2023, In this work, we provide a detailed description of the tri-lamellar nanoscale morphology of a triple crystalline PEO-b-PCL-b-PLLA triblock terpolymer obtained by Hot-Stage Atomic Force microscopy (AFM) imaging and Wide Angle X-ray scattering (WAXS) analysis for the first time. The precursor PCL-b-PLLA diblock copolymer has also been included in the study for comparison purposes. A two-step crystallization protocol has been applied to create a distinct lamellar morphology. Both WAXS and AFM revealed the double crystalline nature of the diblock copolymer. However, the identification of multiple crystalline phases in the triblock terpolymer by AFM and WAXS at room temperature is not straightforward. The advantages of hot-stage AFM allowed following the evolution of the lamellar morphology and the successive melting of the tricrystalline PEO-b-PCL-b-PLLA sample during heating. Taking into account the melting temperature of each crystalline block, the existing lamellar populations were clearly identified. At 45 °C, the thinnest lamellae disappeared, due to the melting of PEO crystals. The medium size lamellae disappeared at 60 °C when PCL crystals melt. At that temperature, the only remaining crystals are those of the PLLA block. AFM mechanical modulus images provide further evidence of the lamellar self-assembly of the triblock terpolymer. The nanoscale arrangement includes lamellae of PCL, PEO, or both in between the PLLA lamellae. Hot-Stage AFM is a valuable technique to elucidate the morphological features of complex multi-crystalline systems., This work has received funding from the European Union´s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092, from MINECO, project: MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. We are grateful to the National Science Foundation of China (nos. 51773182, 51973202), The Young Out-standing Teachers of the University in Henan Province (2019GGJS003). N.H. acknowledges the support of King Abdullah University of Science and Technology (KAUST).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid

  • Costanzo, Andrea
  • Spotorno, Roberto
  • Candal, María Virginia
  • Fernández San Martín, Mercedes
  • Müller Sánchez, Alejandro Jesús
  • Graham, Richard
  • Cavallo, Dario
  • McIlroy, Claire
Unformatted post-print version of the accepted article, Gaining a molecular understanding of material extrusion (MatEx) 3D printing is crucial to predicting and controlling part properties. Here we report the direct observation of distinct birefringence localised to the weld regions between the printed filaments, indicating the presence of molecular orientation that is absent from the bulk of the filament. The value of birefringence at the weld increases at higher prints speeds and lower nozzle temperatures, and is found to be detrimental to the weld strength measured by tensile testing perpendicular to the print direction. We employ a molecularly-aware non-isothermal model of the MatEx flow and cooling process to predict the degree of alignment trapped in the weld at the glass transition. We find that the predicted residual alignment factor, A, is linearly related to the extent of birefringence, Δn. Thus, by combining experiments and molecular modelling, we show that weld strength is not limited by inter-diffusion, as commonly expected, but instead by the configuration of the entangled polymer network. We adapt the classic molecular interpretation of glassy polymer fracture to explain how the measured weld strength decreases with increasing print speed and decreasing nozzle temperature., This research was funded by the Royal Society Exchange Scheme. The authors would like to acknowledge Michela Chiappalone for contributing to experimental measurements. The UPV/EHU team and D. Cavallo gratefully acknowledge funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092. RSG acknowledges funding from the EPSRC (EP/P005403/1.). CM acknowledges funding from the Royal Commission for the Exhibition of 1851.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Even-odd Effect in Aliphatic Polycarbonates with Different Chain Lengths: from Poly (hexamethylene carbonate) to Poly (dodecamethylene carbonate)

  • Pérez Camargo, Ricardo Arpad
  • Meabe Iturbe, Leire
  • Sardon Muguruza, Haritz
  • Liu, Guoming
  • Zhao, Ying
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, We have characterized a series of aliphatic polycarbonates synthesized by organocatalysis containing a variable number of methylene groups (nCH2) in their repeat units ranging from nCH2 = 6 to 12. The melting and crystallization behavior and crystalline structures were studied by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), and wide-angle X-ray scattering (WAXS). We found a clear even-odd effect in terms of thermal properties and crystalline structure, for nCH2 = 6 to 9, and a saturation of the even-odd effect, for nCH2 = 10 to 12. These results were independent of the crystallization conditions employed: non-isothermal, isothermal and successive self-nucleation and annealing (SSA). The even-odd region showed that the even samples had higher melting temperatures than the odd ones, and a monoclinic unit cell. On the other hand, the odd samples showed an orthorhombic unit cell. Both even and odd samples exhibited a trans-conformation, with a dilution of the impact of carbonyl group as evidenced by the weakening of the crystalline memory effect as nCH2 increases, independently of the even or odd nature of the samples. In the saturation region, the methylene instead of the carbonyl groups dominated the behavior, resulting in thermal properties that changed almost linearly with nCH2. The unit cells were all orthorhombic and the strength of memory effect was similar, as nCH2 increased. Accordingly, the samples showed a shift of the FTIR bands towards a PE-like dominated conformation., This work is supported by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (51820105005, 21922308, and 52050410327). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 778092. This work has also received funding from MINECO through project MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. R.A.P.-C. is supported by PIFI of the Chinese Academy of Science for international postdoctoral researchers (2019PE0004), and the China Postdoctoral Science Foundation (2020M670462). G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). L.M. thanks Spanish Ministry of Education, Culture, and Sport for the predoctoral FPU fellowship received to carry out this work.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Effect of Nanoconfinement on the isodimorphic crystallization of Poly(butylene succinate-ran-caprolactone) Random Copolymers

  • Safari, Maryam
  • Leon Boigues, Laia
  • Shi, Guangyu
  • Maiz, Jon
  • Liu, Guoming
  • Wang, Dujin
  • Mijangos, Carmen
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, In this paper, we study for the first time the effect of hard confinement on the isodimorphic crystallization of random copolyesters. A series of poly(butylene succinate-ran-caprolactone) samples encompassing the entire composition range were successfully infiltrated into nanoporous alumina templates (AAO) with a fixed diameter of 100 nm. Samples were characterized using scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and grazing-incidence wide-angle X-ray diffraction (GIWAXS). FTIR proved that PBS-rich nanofibers showed interactions between the copolyester chains and the walls of the AAO templates; however, the PCL-rich nanofibers did not show any interaction with the AAO walls. All infiltrated samples experienced a very large decrease in crystallization temperature, as expected, since the level of confinement is large enough to suppress heterogeneous nucleation. In spite of this, all copolymers were able to crystallize, regardless of composition. Additionally, when Tc or Tm are plotted versus copolymer composition a clear pseudo-eutectic point is observed. These results indicate that the isodimorphic behavior of the copolyesters is maintained under hard confinement. Infiltrated PCL undergoes homogeneous nucleation (inside the nanopore volume) as expected by the lack of interaction with the AAO walls. On the other hand, PBS exhibited a surface nucleation mechanism triggered by the interactions with the AAO walls. In the case of random copolymers, all PCL-rich copolymers nucleated homogeneously. However, in the case of PBS-rich copolymers, the nucleation gradually changed from surface-induced nucleation for neat PBS to homogeneous nucleation, as PCL concentration in the copolymers increased and the interactions of PBS chains with the AAO walls are diluted. The confinement under 100 nm nanopores did not change the orientation of the PBS or PCL phase crystals, which kept their chain direction perpendicular to the pore axis, as demonstrated by GIWAXS., We acknowledge the support of the National Key R&D Program of China (2017YFE0117800), the National Natural Science Foundation of China (21873109, 51820105005). We would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. The UPV/EHU and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-2-P and MAT2017-83014-C2-1-P). M.S. thankfully acknowledges her Ph.D. fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. Authors would like to thank Dr. Antxon Martinez de Ilarduya and Prof. Sebastian Muñoz for their help in the synthesis of copolyesters at UPC, Spain. J.M. gratefully acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Self-nucleation Effects on Polymer Crystallization

  • Sangroniz Agudo, Leire
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, The existence of a “memory” of the previous crystalline state, which survives melting and enhances re-crystallization kinetics by a self-nucleation process, is well-known in polymer crystallization studies. Despite being extensively investigated, since the early days of polymer crystallization studies, a complete understanding of melt memory effects is still lacking. In particular, the exact constitution of self-nuclei is still under debate. In this perspective, we provide a comprehensive and critical overview of melt memory effects in polymer crystallization. After the phenomenology of the process and some key concepts are introduced, the main experimental results of the last decades are summarized. Analogies and discrepancies of the melt memory characteristics of different polymeric systems are highlighted. Based on this background, the most significant interpretations and theories of melt memory effects are described; underlining that different interpretations may apply to various specific cases. Recent insights on self-nucleation, gained thanks to a multi-technique approach (combining calorimetry, rheology, infrared and dielectric spectroscopy), are presented. The role of intra/inter-chain segmental contacts in the strength of melt memory effects, and the differences between homopolymers and copolymers behavior, are discussed. Finally, we identify areas where further research in the field is needed to shed light on the long-standing questions regarding the origin of melt memory effects in semi-crystalline polymers., We acknowledge extensive discussions on melt memory effects with Rufina Alamo, Antxon Santamaria, Giovanni C. Alfonso, Xia Dong, Guoming Liu, Yunlan Su, and Dujin Wang. This work has received funding from the European Union´s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092. AJM and LS also acknowledge funding from MINECO, project: MAT2017-83014-C2-1-P and the Basque Government through grant IT1309-19. LS gratefully thanks the Basque Government for her Postdoctoral Fellowship.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Direct Relationship between Dispersion and Crystallization Behavior in Poly(ethylene oxide)/Poly(ethylene glycol)-g-Silica Nanocomposites

  • Wen, Xiangning
  • Su, Yunlan
  • Liu, Guoming
  • Li, Shaofan
  • Müller Sánchez, Alejandro Jesús
  • Kumar, Sanat K.
  • Wang, Dujin
Unformatted post-print version of the accepted article, The inclusion of polymer-grafted nanoparticles (PGNPs) can impart various functional properties to polymer nanocomposites (PNCs). For semicrystalline polymers, we can control the spatial dispersion of PGNPs and presumably use it to modulate the nucleation rate of the polymer. In this work, the correlation between the dispersion quality of poly(ethylene glycol) (PEG) grafted silica (PEG-g-SiO2) nanoparticles and the crystallization ability of poly(ethylene oxide) (PEO) nanocomposites is systematically investigated by varying the grafting density (σ, chains/nm2) and the value of P/N (P: molecular weight of matrix chains, N: molecular weight of grafted chains). The variation of PEG-g-SiO2 dispersion state was studied by morphological characterization and small-angle X-ray scattering (SAXS). It was found that, in contrast to the unmodified SiO2 and poly(methyl methacrylate) grafted silica (PMMA-g-SiO2), PEG-g-SiO2 (high σ and low P/N) can increase the nucleation rate of PEO even under conditions where they are well dispersed in the PEO matrix. Evidently, the nature of the graft, i.e., amorphous PMMA vs. crystallizable PEO, has profound consequences in this context, a novel result that has not been anticipated based on previous work. NP aggregation occurs at higher P/N values and limits the effectiveness of the grafted PEG on the crystallization ability of PEO nanocomposites. Based on differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM) characterization, we deduced that the increased nucleation density at high σ and low P/N has a strong impact on accelerating the overall crystallization of PEO nanocomposites., This project is supported by the Ministry of Science and Technology of China (2017YFE0117800) and the National Natural Science Foundation of China (21574141). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. The authors thank Prof. Yongfen Men (CIAC) for providing the SAXS beam time and helps during experiments. The discussion of TEM data with Andrew M. Jimenez (Columbia University, New York, NY) is gratefully acknowledged. We also thank B. Guan, J. L. Yue and K. A. Liu for help in cryo-TEM experiments.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization and Morphology of Triple Crystalline Polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone) PE-b-PEO-b-PCL Triblock Terpolymers

  • Matxinandiarena Almandoz, Eider
  • Mugica Iztueta, Miren Agurtzane
  • Zubitur Soroa, María Manuela
  • Ladelta, Viko
  • Zapsas, George
  • Cavallo, Dario
  • Hadjichristidis, Nikos
  • Müller Sánchez, Alejandro Jesús
The morphology and crystallization behavior of two triblock terpolymers of polymethylene, equivalent to polyethylene (PE), poly (ethylene oxide) (PEO), and poly (ε-caprolactone) (PCL) are studied: PE227.1-b-PEO4615.1-b-PCL3210.4 (T1) and PE379.5-b-PEO348.8-b-PCL297.6 (T2) (superscripts give number average molecular weights in kg/mol and subscripts composition in wt %). The three blocks are potentially crystallizable, and the triple crystalline nature of the samples is investigated. Polyhomologation (C1 polymerization), ring-opening polymerization, and catalyst-switch strategies were combined to synthesize the triblock terpolymers. In addition, the corresponding PE-b-PEO diblock copolymers and PE homopolymers were also analyzed. The crystallization sequence of the blocks was determined via three independent but complementary techniques: differential scanning calorimetry (DSC), in situ SAXS/WAXS (small angle X-ray scattering/wide angle X-ray scattering), and polarized light optical microscopy (PLOM). The two terpolymers (T1 and T2) are weakly phase segregated in the melt according to SAXS. DSC and WAXS results demonstrate that in both triblock terpolymers the crystallization process starts with the PE block, continues with the PCL block, and ends with the PEO block. Hence triple crystalline materials are obtained. The crystallization of the PCL and the PEO block is coincident (i.e., it overlaps); however, WAXS and PLOM experiments can identify both transitions. In addition, PLOM shows a spherulitic morphology for the PE homopolymer and the T1 precursor diblock copolymer, while the other systems appear as non-spherulitic or microspherulitic at the last stage of the crystallization process. The complicated crystallization of tricrystalline triblock terpolymers can only be fully grasped when DSC, WAXS, and PLOM experiments are combined. This knowledge is fundamental to tailor the properties of these complex but fascinating materials., This research received funding from MINECO through projects MAT2017-83014-C2-1-P, from the Basque Government through grant IT1309-19, and from ALBA synchrotron facility through granted proposal u2020084441 (March 2020). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 778092. GZ, VL, and NH wish to acknowledge the support of KAUST.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Accelerating the crystallization kinetics of linear polylactides by adding cyclic poly (L-lactide): Nucleation, plasticization and topological effects

  • Betegón Ruiz, Marina
  • Pérez Camargo, Ricardo Arpad
  • López Brito, Juan Vicente
  • Penott Chang, Evis
  • Coulembier, Olivier
  • Müller Sánchez, Alejandro Jesús
  • Mugica Iztueta, Miren Agurtzane
Unformatted post-print version of the accepted article, Polylactide is one of the most versatile biopolymers, but its slow crystallization limits its temperature usage range. Hence finding ways to enhance it is crucial to widen its applications. Linear and cyclic poly (L-lactide) (l-PLLA and c-PLLA) of similarly low molecular weights (MW) were synthesized by ring-opening polymerization of L-lactide, and ring-expansion methodology, respectively. Two types of blends were prepared by solution mixing: (a) l-PLLA/c-PLLA, at extreme compositions (rich in linear or in cyclic chains), and (b) blends of each of these low MW materials with a commercial high MW linear PLA. The crystallization of the different blends was evaluated by polarized light optical microscopy and differential scanning calorimetry. It was found, for the first time, that in the l-PLLA rich blends, small amounts of c-PLLA (i.e., 5 and 10 wt%) increase the nucleation density, nucleation rate (1/τ0), spherulitic growth rate (G), and overall crystallization rate (1/τ50%), when compared to neat l-PLLA, due to a synergistic effect (i.e., nucleation plus plasticization). In contrast, the opposite effect was found in the c-PLLA rich blends. The addition of small amounts of l-PLLA to a matrix of c-PLLA chains causes a decrease in the nucleation density, 1/τ0, G, and 1/τ50% values, due to threading effects between cyclic and linear chains. Small amounts of l-PLLA and c-PLLA enhance the crystallization ability of a commercial high MW linear PLA without affecting its melting temperature. The l-PLLA only acts as a plasticizer for the PLA matrix, whereas c-PLLA has a synergistic effect in accelerating the crystallization of PLA that goes beyond simple plasticization. The addition of small amounts of c-PLLA affects not only PLA crystal growth but also its nucleation due to the unique cyclic chains topology., We would like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. This work has also received funding from the Basque Government through grant IT1309-19. R.A.P.-C is supported by PIFI of the Chinese Academy of Science for international postdoctoral researchers (2019PE0004), the China Postdoctoral Science Foundation (2020M670462), and National Natural Science Foundation of China (NSFC) (52050410327) under the program Research Fund for International Young Scientists. O.C. is Senior Research Associate for the F.R.S.-FNRS of Belgium.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Nanostructural Organization of Thin Films Prepared by Sequential Dip-Coating Deposition of Poly(Butylene Succinate), Poly(ε-Caprolactone) and Their Copolyesters (PBS-ran-PCL)

  • Peñas Núñez, Mario Iván
  • Ocando, Connie
  • Penott Chang, Evis
  • Safari, Maryam
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
  • Hernández, Rebeca
  • Müller Sánchez, Alejandro Jesús
In this work, we prepare and characterize multiphasic thin films containing poly(epsilon-caprolactone), PCL, poly (butylene succinate), PBS, and a poly (butylene succinate-ran-epsilon-caprolactone) (PBS-ran-PCL) random copolyester. To that aim, thin films were prepared by sequential dipping of a silicon substrate into chloroform solutions of the respective polymers. The preparation method resulted in films with varying compositions of PCL and PBS components depending on the initial concentration of the dipping solutions and the number of dipping steps employed for the preparation of the samples. Atomic force microscopy (AFM), grazing incidence X-ray scattering at wide angle (GIWAXS) and scattering-type scanning near-field optical microscopy (s-SNOM) and Fourier transform infrared nanospectroscopy (nano-FTIR) were employed to characterize the films obtained. As chloroform can dissolve all components, the final composition of the film was always rich in the last deposited layer component. The thin films obtained were semicrystalline with a complex axialitic or dendritic morphology of the dominant component (that one deposited last) with traces of the other components, whose presence and location was revealed by s-SNOM/nano-FTIR., This study was supported by Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2019-107514 GB-I00/AEI/10.13039/501100011033 and PID2019-106125 GB-I00/AEI/10.13039/501100011033). We also acknowledge funding by Basque Government through grant IT1309-19. The authors acknowledge beamtime access at ALBA BL11 via proposal 2018072905 and the assistance of JC Martinez during the measurements. We would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778092. CO wants to acknowledge “Diputación Foral de Gipuzkoa” in the framework program “Fellows Gipuzkoa de Atracción y Retención de Talento”
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Synthesis, Structure and Crystallization Behavior of Amphiphilic Hetero-arm Molecular Brushes with Crystallizable Poly(ethylene oxide) and N-Alkyl Side Chains

  • Barnard, Elaine
  • Pfukwa, Rueben
  • Maiz, Jon
  • Müller Sánchez, Alejandro Jesús
  • Klumperman, Bert
Unformatted post-print version of the accepted article, A series of hetero-arm amphiphilic molecular brushes (AMBs) with poly(ethylene glycol) (PEG) and long chain n-alkyl side chains were synthesized via conventional free radical polymerization (FRP) of mainly 4-vinyl benzyl-PEG methyl ether and N-alkylmaleimide macromonomers. By varying PEG side chain degree of polymerization (D.P. = 12, 16 and 20) and n-alkyl chain lengths (C16 and C20), AMBs with varying combinations of side chain lengths were produced. This enabled the elucidation of the effect of side chain length on AMB phase behavior, semicrystalline morphologies and crystallization kinetics, via differential scanning calorimetry, polarized light optical microscopy and x-ray diffraction experiments. Calculations of segregation strength together with SAXS measurements indicate that all materials are probably phase segregated structure in the melt. Most of the AMB materials prepared were double crystalline, i.e., contained crystals from alkyl and PEG chains. AMB crystallization was constrained by AMB architecture, the frustration being most evident in AMBs with combinations of either low D.P.PEG, or short alkyl chain lengths. Large, well-developed spherulites, implying break-out crystallization from a weakly segregated melt, were only observed for the AMBs with the combination of the longest PEG chain (D.P. = 20) and longest alkyl chain length (C20). A peculiar behavior was found when spherulitic growth rates and overall crystallization rates of the PEG chains, within this particular AMB sample, were determined as a function of crystallization temperature. In both cases, a distinct minimum with decreasing temperature was observed, probably caused by the challenges encountered in crystal packing of the PEG side chains, tethered to an amorphous backbone, which also contained already crystallized C20 chains. This minimum is analogous to that observed in the crystallization of long chain n-alkanes, or high molar mass polyethylenes with bromine pendant groups that has been attributed to a self-poisoning effect; this is the first observation of this phenomenon in AMBs., This work is based on the research supported by the South African Research Chairs Initiative of the Department of Science and Technology (DST) and National Research Foundation (NRF) of South Africa (Grant No 46855). J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016. This work has received funding from the European Union´s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092, from MINECO, project: MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. We also thank ALBA Synchrotron facility for providing funding and beam time (proposal number: 2018082953).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Crystallization, Orientation and Solid−Solid Crystal Transition of Polybutene‐1 Confined within Nanoporous Alumina, Crystallization, Orientation, and Solid−Solid Crystal Transition of Polybutene‑1 Confined within Nanoporous Alumina

  • Wang, Zefan
  • Wang, Ming
  • Cavallo, Dario
  • Wang, Dujin
  • Liu, Guoming
  • Müller Sánchez, Alejandro Jesús
  • Shi, Guangyu
Unformatted post-print version of the accepted article, The effect of confinement on the crystallization, crystal orientation, and polymorphic crystal transition of bulk and infiltrated polybutene-1 (PB-1) within nanoporous alumina templates (AAO) were studied. After cooling from the melt, PB-1 within AAO templates crystallized into the tetragonal Form II directly. The nucleation process inside the AAO pores was probably homogeneous when pore sizes were below 200 nm. The crystal orientation of Form II was investigated by grazing angle X-ray scattering. Form II to I transition was investigated as a function of time and modeled with the Avrami equation. The rate of Form II to I transition for infiltrated PB-1 within 400 nm AAO was unexpectedly higher than that of the bulk. The stress generated due to the mismatch of the thermal expansion coefficients between PB-1 and AAO greatly enhanced the nucleation of Form I within the Form II matrix. A slower Form II to I transition was observed when the pore diameter of AAO decreased. The transition degree decreased with decreasing pore diameter and was completely inhibited for PB-1 infiltrated within the 30 nm AAO template. A stable Form II interfacial layer with a thickness of ~ 12 nm was postulated to account for this phenomenon., This work is supported by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21873109 and 21922308). We acknowledge sponsorship from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 778092. G. L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Effect of the crystallization conditions on the exclusion/inclusion balance in biodegradable poly(butylene succinate-ran-butylene adipate) copolymers

  • Pérez Camargo, Ricardo Arpad
  • Liu, Guoming
  • Cavallo, Dario
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, Biomedical applications of polymers require precise control of the solid-state structure, which is of particular interest for biodegradable copolymers. In this work, we evaluated the influence of crystallization conditions on the comonomer exclusion/inclusion balance of biodegradable poly (butylene succinate-ran-butylene adipate) (PBSA) isodimorphic random copolymers. Regardless of the crystallization conditions, the copolymers retain their isodimorphic character displaying a pseudo-eutectic behavior with crystallization in the entire composition range. This illustrates the thermodynamic nature of the isodimorphic behavior for PBSA random copolymers. However, depending on the composition, the crystallization conditions affect the exclusion/inclusion balance of the comonomers. Fast cooling favors BA inclusion inside the PBS crystals, whereas isothermal crystallization strongly limits it. PBA rich compositions behave differently. Both fast and slow crystallization formed the β-phase, whereas BS unit inclusion is favored independently of the cooling conditions. During Successive Self-nucleation and Annealing (SSA), the BA inclusion is intermediate between non-isothermal and isothermal conditions, while the crystalline structure of the PBA phase changes from β-phase to the more stable α-phase. We propose a simple crystallographic model to explain the changes in the unit cell dimension of the copolymers., This work is supported by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (51820105005). R.A.P-C is supported by PIFI of the Chinese Academy of Science for international postdoctoral researchers (2019PE0004). This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 778092. This work has also received funding from MINECO through project MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. We also thank Thibaud Debuissy and Luc Averous for providing us with the PBSA samples, whose synthesis has been reported in previous publications.19, 91, 92 The support of the European Synchrotron Radiation Facility (ESRF) and the ALBA synchrotron facility is gratefully acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Composition Dependent Miscibility in the Crystalline State of Polyamide 6 /Polyamide 4,10 Blends: from Single to Double Crystalline Blends

  • Safari, Maryam
  • Otaegi Tena, Itziar
  • Aramburu Ocáriz, Nora
  • Wang, Yu
  • Liu, Guoming
  • Dong, Xia
  • Wang, Dujin
  • Guerrica Echevarría Estanga, Gonzalo María
  • Müller Sánchez, Alejandro Jesús
Sustituido preprint por postprint 03-05-2023, In this work, we studied the composition-dependent miscibility of polyamide 6 and biobased polyamide 4,10 (PA6/PA410) blends, as triggered by crystallization driven phase segregation. The blends were prepared by extrusion melt blending in a wide composition range and studied by Differential Scanning Calorimetry (DSC), X-ray diffraction (both in-situ and ex-situ SAXS/WAXS), and Polarized Light Optical Microscopy (PLOM) during non-isothermal crystallization. The blends were found to be miscible in the amorphous state, as demonstrated by a single Tg that follows the Fox equation as a function of composition. The blends were also considered to be miscible in the melt, as no evidence of phase segregation was found by SAXS or phase contrast microscopy in the melt. The miscibility of the blends in the crystalline state is a strong function of composition. When only 10 or 20% PA6 is present in the blends, co-crystallization was evidenced by DSC and WAXS and the blends exhibited a single PA410 rich crystalline phase. On the other hand, as 30% or more PA6 is added to PA410, crystallization driven phase segregation occurs and progressively increased with PA6 content in the blends. Hence double crystalline blends are formed with both PA6 rich and PA410 rich crystalline phases. Clear evidence of either one or two crystalline phases was demonstrated by temperature-dependent measurements employing DSC, PLOM, WAXS and SAXS. Both the single and double crystalline PA6/PA410 blends exhibited good mechanical properties in view of the excellent compatibility displayed by the blends. The mechanical properties are in line with those exhibited by miscible blends following a simple rule of mixtures., We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 778092. We also thank finantial support from the Basque Government through project IT309-19. G.L., D.W. and A. J. M thank the support from the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (51820105005). I. Otaegi acknowledges the grant awarded by the Basque Government. G.L. is grateful to the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Y201908). The POLYMAT/UPV/EHU team acknowledge funding from ALBA synchrotron facility through granted proposal number: 2018093081 (March 2019).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Synthesis, morphology, and crystallization kinetics of polyheptalactone (PHL)

  • Caputo, Maria Rosaria
  • Olmos Amondarain, Asier
  • Li, Bo
  • Olmedo Martínez, Jorge L.
  • Malafronte, Anna
  • De Rosa, Claudio
  • Sardon Muguruza, Haritz
  • O'Reilly, Rachel K.
  • Dove, Andrew
  • Müller Sánchez, Alejandro Jesús
Aliphatic polyesters are widely studied due to their excellent properties and low-cost production and also because, in many cases, they are biodegradable and/or recyclable. Therefore, expanding the range of available aliphatic polyesters is highly desirable. This paper reports the synthesis, morphology, and crystallization kinetics of a scarcely studied polyester, polyheptalactone (PHL). First, we synthesized the η-heptalactone monomer by the Baeyer–Villiger oxidation of cycloheptanone before several polyheptalactones of different molecular weights (in the range between 2 and 12 kDa), and low dispersities were prepared by ring-opening polymerization (ROP). The influence of molecular weight on primary nucleation rate, spherulitic growth rate, and overall crystallization rate was studied for the first time. All of these rates increased with PHL molecular weight, and they approached a plateau for the highest molecular weight samples employed here. Single crystals of PHLs were prepared for the first time, and hexagonal-shaped flat single crystals were obtained. The study of the crystallization and morphology of PHL revealed strong similarities with PCL, making PHLs very promising materials, considering their potential biodegradable character., This work has received funding from the Basque Government through grant IT1503-22. The authors would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 778092.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Sequential crystallization and multi-crystalline morphology in PE-b-PEO-b-PCL-b-PLLA tetrablock quarterpolymers, Sequential Crystallization and Multicrystalline Morphology in PE‑b‑PEO‑b‑PCL‑b‑PLLA Tetrablock Quarterpolymers

  • Matxinandiarena Almandoz, Eider
  • Mugica Iztueta, Miren Agurtzane
  • Tercjak Sliwinska, Agnieszka
  • Ladelta, Viko
  • Zapsas, George
  • Hadjichristidis, Nikos
  • Cavallo, Dario
  • Flores, Araceli
  • Müller Sánchez, Alejandro Jesús
Unformatted post-print version of the accepted article, We investigate for the first time the morphology and crystallization of two novel tetrablock quarterpolymers of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), and poly(L-lactide) (PLLA) with four potentially crystallizable blocks: PE18 7.1-b-PEO37 15.1-b-PCL26 10.4-b-PLLA19 7.6 (Q1) and PE29 9.5-b-PEO26 8.8-b-PCL23 7.6-b-PLLA22 7.3 (Q2) (superscripts give number average molecular weights in kg/mol, and subscripts give the composition in wt %). Their synthesis was performed by a combination of polyhomologation (C1 polymerization) and ring-opening polymerization techniques using a ″catalyst-switch″ strategy, either ″organocatalyst/metal catalyst switch″ (Q1 sample, 96% isotactic tetrads) or ″organocatalyst/ organocatalyst switch″ (Q2 sample, 84% isotactic tetrads). Their corresponding precursorstriblock terpolymers PE-b-PEO-b-PCL, diblock copolymers PE-b-PEO, and PE homopolymerswere also studied. Cooling and heating rates from the melt at 20 °C/min were employed for most experiments: differential scanning calorimetry (DSC), polarized light optical microscopy (PLOM), in situ small-angle X-ray scattering/wide-angle X-ray scattering (SAXS/WAXS), and atomic force microscopy (AFM). The direct comparison of the results obtained with these different techniques allows the precise identification of the crystallization sequence of the blocks upon cooling from the melt. SAXS indicated that Q1 is melt miscible, while Q2 is weakly segregated in the melt but breaks out during crystallization. According to WAXS and DSC results, the blocks follow a sequence as they crystallize: PLLA first, then PE, then PCL, and finally PEO in the case of the Q1 quarterpolymer; in Q2, the PLLA block is not able to crystallize due to its low isotacticity. Although the temperatures at which the PEO and PCL blocks and the PE and PLLA blocks crystallize overlap, the analysis of the intensity changes measured by WAXS and PLOM experiments allows identifying each of the crystallization processes. The quarterpolymer Q1 remarkably self-assembles during crystallization into tetracrystalline banded spherulites, where four types of different lamellae coexist. Nanostructural features arising upon sequential crystallization are found to have a relevant impact on the mechanical properties. Nanoindentation measurements show that storage modulus and hardness of the Q1 quarterpolymer significantly deviate from those of the stiff PE and PLLA blocks, approaching typical values of compliant PEO and PCL. Results are mainly attributed to the low crystallinity of the PE and PLLA blocks. Moreover, the Q2 copolymer exhibits inferior mechanical properties than Q1, and this can be related to the PE block within Q1 that has thinner crystal lamellae according to its much lower melting point., This work has received funding from MINECO through projects MAT2017-83014-C2-1-P and MAT2017-88382-P, from the Basque Government through grant IT1309-19, and from the ALBA synchrotron facility through granted proposal u2020084441 (March 2020). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 778092.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of chain topology (cyclic versus linear) on the nucleation and isothermal crystallization of poly(l-lactide) and poly(d-lactide)

  • Zaldua, Nerea
  • Liénard, Romain
  • Josse, Thomas
  • Zubitur, Manuela
  • Múgica, Agurtzane
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • De Winter, Julien
  • Coulembier, Olivier
  • Müller, Alejandro J.
Ring closure click chemistry methods have been used to produce cyclic c-PLLA and c-PDLA of a number-average molecular weight close to 10 kg/mol. The effects of stereochemistry of the polymer chains and their topology on their structure, nucleation, and crystallization were studied in detail employing wide-angle X-ray scattering (WAXS), small-angle X-ray scattering (SAXS), polarized light optical microscopy (PLOM), and standard and advanced differential scanning calorimetry (DSC). The crystal structures of linear and cyclic PLAs are identical to each other, and no differences in superstructural morphology could be detected. Cyclic PLA chains are able to nucleate much faster and to produce a higher number of nuclei in comparison to linear analogues, either upon cooling from the melt or upon heating from the glassy state. In the samples prepared in this work, a small fraction of linear or higher molecular weight cycles were detected (according to SEC analyses). The presence of such “impurities” retards spherulitic growth rates of c-PLAs, making them nearly the same as those of l-PLAs. On the other hand, the overall crystallization rate determined by DSC was much larger for c-PLAs, as a consequence of the enhanced nucleation that occurs in cyclic chains. The equilibrium melting temperatures of cyclic chains were determined and found to be 5 °C higher in comparison with values for l-PLAs. This result is a consequence of the lower entropy of cyclic chains in the melt. Self-nucleation studies demonstrated that c-PLAs have a shorter crystalline memory than linear analogues, as a result of their lower entanglement density. Successive self-nucleation and annealing (SSA) experiments reveal the remarkable ability of cyclic molecules to thicken, even to the point of crystallization with extended collapsed ring conformations. In general terms, stereochemistry had less influence on the results obtained in comparison with the dominating effect of chain topology., The UPV/EHU team acknowledges funding from the following projects: “UPV/EHU Infrastructure: INF 14/38”; “Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13-4E-1726” and “Mineco MAT2014-53437−C2-P”, ’Ministerio de Economia y Competitividad (MINECO), code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza (Basque Government), code: IT-654-13. O.C. acknowledges financial support from the European Commission and Region Wallonne FEDER program (Materia Nova) and OPTI2 MAT program of excellence, by the Interuniversity Attraction Pole Program (P7/ 05) initiated by the Belgian Science Policy office and by the FNRS-FRFC. O.C. is a Research Associate of the F.R.S.-FNRS. The Organic Synthesis and Mass Spectrometry Laboratory thanks F.R.S.-FNRS for the financial support for the acquisition of the Waters QToF Premier and Synapt-G2Si mass spectrometers and for continuing support. Finally, all authors acknowledge Research and Innovation Staff Exchange (RISE) H2020-MSCA-RISE-2017-778092, project BIODEST, for promoting cooperation between the Mons team and the UPV/EHU team., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of titanium dioxide Surface modification on the dispersion, morphology, and mechanical properties of recycled PP/PET/TiO2 PBNANOs

  • Matxinandiarena, Eider
  • Múgica, Agurtzane
  • Zubitur, Manuela
  • Yus, Cristina
  • Sebastián, Víctor
  • Irusta, Silvia
  • Loaeza, Alfonso David
  • Santana, Orlando
  • Maspoch, Maria Lluisa
  • Puig, Cristian
  • Müller, Alejandro J.
This article belongs to the Special Issue Eurofillers Polymer Blends., Titanium dioxide (TiO2) nanoparticles have recently appeared in PET waste because of the introduction of opaque PET bottles. We prepare polymer blend nanocomposites (PBNANOs) by adding hydrophilic (hphi), hydrophobic (hpho), and hydrophobically modified (hphoM) titanium dioxide (TiO2) nanoparticles to 80rPP/20rPET recycled blends. Contact angle measurements show that the degree of hydrophilicity of TiO2 decreases in the order hphi > hpho > hphoM. A reduction of rPET droplet size occurs with the addition of TiO2 nanoparticles. The hydrophilic/hydrophobic balance controls the nanoparticles location. Transmission electron microscopy (TEM_ shows that hphi TiO2 preferentially locates inside the PET droplets and hpho at both the interface and PP matrix. HphoM also locates within the PP matrix and at the interface, but large loadings (12%) can completely cover the surfaces of the droplets forming a physical barrier that avoids coalescence, leading to the formation of smaller droplets. A good correlation is found between the crystallization rate of PET (determined by DSC) and nanoparticles location, where hphi TiO2 induces the highest PET crystallization rate. PET lamellar morphology (revealed by TEM) is also dependent on particle location. The mechanical behavior improves in the elastic regime with TiO2 addition, but the plastic deformation of the material is limited and strongly depends on the type of TiO2 employed., This research was funded by the EU project REVALPET, POCTEFA EFA064-15 (Interreg VA). The UPV/EHU team gratefully acknowledges the financial contribution of the Basque Government through grant IT1309-19 and the funding of the European Union´s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 778092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organocatalyzed Polymerization of PET- mb-poly(oxyhexane) Copolymers and Their Self-Assembly into Double Crystalline Superstructures

  • Flores, I.
  • Basterretxea, A.
  • Etxeberria, Agustín
  • González, A.
  • Ocando, C.
  • Vega, Juan Francisco
  • Martínez-Salazar, Javier
  • Sardon, H.
  • Müller, A.J.
15 pags., 15 figs., 5 tabs., 2 schs., Double crystalline multiblock copolymers exhibit two well-defined melting temperatures associated with the two phases formed by their constituent blocks. The crystalline superstructure formed in these copolymers is complex and depends on the miscibility of both comonomers. In this work, an innovative series of double crystalline poly(ethylene terephthalate)-mb-poly(oxyhexane) multiblock copolymers were prepared in one pot. Previously synthesized low molecular weight poly(oxyhexane)telechelic diol and poly(ethylene terephthalate) (PET) oligomers were reacted by transesterification using an organic catalyst (1,8-diazabicyclo[5.4.0]undec-7-ene/benzoic acid), in a solvent-free process. The copolymerization was demonstrated by H NMR and C NMR spectroscopies, and the random distribution of poly(oxyhexane) chains was confirmed. We found that all compositions exhibited double crystallinity, but the crystallization of the copolymers was strongly affected by the PET/poly(oxyhexane) composition. When the PET content in the copolymer decreases, the crystallization and melting temperatures of the poly(oxyhexane) phase decrease as well as its crystallization rate. The poly(oxyhexane) content increases induce similar changes in the PET phase. PET and poly(oxyhexane) chain segments form a one-phase melt according to small-angle X-ray scattering (SAXS). When the material is cooled from the melt, the PET phase crystallizes first (at higher temperatures), forming superstructural (micrometer size spherulites) templates. Upon further cooling, the crystallization of poly(oxyhexane) lamellae occurs, within the interlamellar regions of PET spherulitic templates. Furthermore, during crystallization of the copolymer, the amorphous regions of both components undergo phase separation, as evidenced by the presence of two T's. Polarized light optical microscopy/atomic force microscopy studies were performed and demonstrated the presence of microspherulitic morphology in the whole composition range. Considering all results, including temperature-dependent synchrotron SAXS/wide-angle X-ray scattering, we demonstrate the ability of poly(oxyhexane) to crystallize upon cooling within the previously formed PET spherulitic templates. Hence, these copolymers form complex double crystalline spherulitic superstructures which contain two amorphous and two crystalline interlamellar phases., We acknowledge funding by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778092. We also acknowledge funding by MINECO through project MAT2017-83014-C2-1-P. I.F. would like to acknowledge CONACYT (Mexico) for the Ph.D. grant awarded.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PET- ran-PLA Partially Degradable Random Copolymers Prepared by Organocatalysis: Effect of Poly(l -lactic acid) Incorporation on Crystallization and Morphology

  • Flores, I.
  • Etxeberria, Agustín
  • Irusta, L.
  • Calafel, I.
  • Vega, Juan Francisco
  • Martínez-Salazar, Javier
  • Sardon, H.
  • Müller, A.J.
13 pags., 16 figs., 2 tabs., Polyethylene terephthalate (PET) is a nonbiodegradable polymer whose hydrolytic degradation can take decades. Intensive research has been performed to accelerate its hydrolytic degradation without significantly affecting its properties. In this work, PET was combined with poly(lactic acid) (PLA), a well-known biodegradable polymer, and the effect of PLA content in the crystallization of the PET component has been investigated in detail. To make the process sustainable, PET was polymerized using monomers that can be derived from PET chemical recycling (dimethyl terephthalate) and using organocatalysis (metal-free catalysts). First, low-molecular-weight telechelic PLA was prepared from the organocatalyzed ring-opening polymerization (ROP) of l-lactide followed by step-growth copolymerization with PET oligomers. The random copolymerization was confirmed by Fourier transform infrared (FTIR) and H NMR. We found that PET-ran-PLA copolymers are able to crystallize up to 24 mol % of PLA. Wide-angle and small-angle X-ray scattering (WAXS and SAXS) demonstrated that PLA units interrupt the average crystallizable PET sequences, decreasing its lamellar thickness, melting point, and crystallinity. The temperature dependence of the crystallization rate remarkably switches from nucleation control to diffusion control, as the mol % of PLA approaches the maximum tolerable limit for crystallization. The copolymers exhibited a microspherulitic PET morphology that changed to axialitic at relatively high contents of PLA. Preliminary hydrolytic degradation experiments demonstrate the potential degradation character of the prepared copolymers. If we consider the degradability of the copolymers obtained together with the green synthetic route employed (using dimethyl terephthalate, a monomer that can be obtained from the chemical route for recycling PET), the copolymers produced represent a step toward revalorization of PET recycled monomers for the production of sustainable materials., A.J.M. and H.S. acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). A.J.M. and I.F. acknowledge funding and beam time from ALBA Synchrotron facility through the project: 2017092338 (2018). I.F. acknowledges CONACYT (Mexico) for the Ph.D. grant awarded. A.J.M. acknowledges funding from MINECO, project: MAT2017-83014-C2-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of nanoconfinement on the isodimorphic crystallization of poly(butylene succinate-ran-caprolactone) random copolymers

  • Safari, Maryam
  • León-Boigues, Laia
  • Shi, Guangyu
  • Maiz, Jon
  • Liu, Guoming
  • Wang, Dujin
  • Mijangos, Carmen
  • Müller, Alejandro J.
In this paper, we study for the first time the effect of hard confinement on the isodimorphic crystallization of random copolyesters. A series of poly(butylene succinate-ran-caprolactone) samples encompassing the entire composition range were successfully infiltrated into nanoporous alumina templates (anodic aluminum oxide (AAO)) with a fixed diameter of 100 nm. The samples were characterized using scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and grazing-incidence wide-angle X-ray scattering (GIWAXS). FTIR proved that poly(butylene succinate) (PBS)-rich nanofibers showed interactions between the copolyester chains and the walls of the AAO templates; however, the poly(ε-caprolactone) (PCL)-rich nanofibers did not show any interaction with the AAO walls. All infiltrated samples experienced a very large decrease in crystallization temperature, as expected, since the level of confinement is large enough to suppress heterogeneous nucleation. In spite of this, all copolymers were able to crystallize, regardless of composition. Additionally, when Tc or Tm is plotted versus copolymer composition, a clear pseudoeutectic point is observed. These results indicate that the isodimorphic behavior of the copolyesters is maintained under hard confinement. Infiltrated PCL undergoes homogeneous nucleation (inside the nanopore volume) as expected by the lack of interaction with the AAO walls. On the other hand, PBS exhibited a surface nucleation mechanism triggered by the interactions with the AAO walls. In the case of random copolymers, all PCL-rich copolymers nucleated homogeneously. However, in the case of PBS-rich copolymers, the nucleation gradually changed from surface-induced nucleation for neat PBS to homogeneous nucleation as the PCL concentration in the copolymers increased and the interactions of PBS chains with the AAO walls are diluted. The confinement under 100 nm nanopores did not change the orientation of the PBS or PCL phase crystals, which kept their chain direction perpendicular to the pore axis, as demonstrated by GIWAXS., The authors acknowledge the support of the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21873109, 51820105005). The authors would also like to acknowledge financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 778092. The UPV/EHU and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-2-P and MAT2017-83014-C2-1-P). M.S. thankfully acknowledges her Ph.D. fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. The authors would like to thank Dr. Antxon Martinez de Ilarduya and Prof. Sebastian Muñoz for their help in the synthesis of copolyesters at UPC, Spain. J.M. gratefully acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructural organization of thin films prepared by sequential dip-coating deposition of poly(butylene succinate), poly(ε-caprolactone) and their copolyesters (PBS-ran-PCL)

  • Peñas, Mario I.
  • Ocando, C.
  • Penott-Chang, E.
  • Safari, Maryam
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
  • Hernández, Rebeca
  • Müller, A.J.
10 pags., 7 figs., 2 tabs., In this work, we prepare and characterize multiphasic thin films containing poly(ε-caprolactone), PCL, poly(butylene succinate), PBS, and a poly (butylene succinate-ran-ϵ-caprolactone) (PBS-ran-PCL) random copolyester. To that aim, thin films were prepared by sequential dipping of a silicon substrate into chloroform solutions of the respective polymers. The preparation method resulted in films with varying compositions of PCL and PBS components depending on the initial concentration of the dipping solutions and the number of dipping steps employed for the preparation of the samples. Atomic force microscopy (AFM), grazing incidence X-ray scattering at wide angle (GIWAXS) and scattering-type scanning near-field optical microscopy (s-SNOM) and Fourier transform infrared nanospectroscopy (nano-FTIR) were employed to characterize the films obtained. As chloroform can dissolve all components, the final composition of the film was always rich in the last deposited layer component. The thin films obtained were semicrystalline with a complex axialitic or dendritic morphology of the dominant component (that one deposited last) with traces of the other components, whose presence and location was revealed by s-SNOM/nano-FTIR., This study was supported by Spanish Ministry of Science, Innovation and Universities (MAT2017- 83014-C2-1-P, MAT2017-83014-C2-2-P, PID2019-107514 GB-I00/AEI/ 10.13039/501100011033 and PID2019-106125 GB-I00/AEI/ 10.13039/501100011033). We also acknowledge funding by Basque Government through grant IT1309-19. The authors acknowledge beamtime access at ALBA BL11 via proposal 2018072905 and the assistance of JC Martinez during the measurements. We would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778092. CO wants to acknowledge “Diputaci on Foral de Gipuzkoa” in the framework program “Fellows Gipuzkoa de Atracci ́on y Retenci ́on de Talento”. RH is member of the Interdisci-plinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable enzymatic biodegradation of poly(butylene succinate): biobased coatings and self-degradable films

  • Peñas, Mario I.
  • Criado-González, Miryam
  • Martínez de Ilarduya, Antxon
  • Flores, Araceli
  • Raquez, Jean-Marie
  • Mincheva, Rosica
  • Müller, Alejandro J.
  • Hernández, Rebeca
Biodegradation of polyesters driven by enzymes is considered as one of the most effective way of degradation of these materials, as a way to control plastics accumulation in the environment. In this study, we present two different strategies to tune the enzymatic degradation of PBS films triggered by a lipase from Pseudomonas cepacia. Firstly, the kinetics of enzymatic degradation of PBS films was regulated by applying multilayer coats of polysaccharide alginate and chitosan (Alg/Chi) films. Secondly, self-degradable PBS films were prepared by embedding lipase-filled alginate particles. For comparison purposes, a detailed enzymatic degradation study of neat PBS films exposed to a lipase from P. cepacia in solution was made to determine the main experimental parameters influencing their degradation in solution. The results showed that an increase in enzyme concentration increased the degradation extent and rate of neat PBS films. At a fixed enzyme concentration, stirring of the solution containing the enzyme and the PBS also increased the biodegradation rate. In the case of the PBS films coated with a different number of Alg/Chi layers by spray-assisted LbL and subjected to enzymatic degradation experiments in solution, the extent of degradation was found to be dependent on the number of protective coating layers. Therefore, the Alg/Chi biobased coating constitutes an effective barrier to the diffusion of the lipase, thus proving its effectiveness in modulating the enzymatic activity as a function of coating thickness. In the case of self-degradable PBS containing lipase-embedded alginate beads (employed to protect the enzyme during high-temperature processing), only limited biodegradation was observed as the amount of encapsulated enzyme employed was too small. Nonetheless, these results are promising, as the enzymatic activity –indicative of the degradation capacity of the enzyme– determined for all these samples was about 2 orders of magnitude lower than that of previous assays., This research was funded by the projects MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). J.M.R. is a FRS-FNRS Senior Research Associate. Authors would also like to thank Dr. Ana Beloqui for helpful discussions on enzymatic activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic Degradation Behavior of Self-Degradable Lipase-Embedded Aliphatic and Aromatic Polyesters and Their Blends

  • Peñas, Mario I.
  • Beloqui, A.
  • Martínez de Ilarduya, A.
  • Suttiruengwong, S.
  • Hernández, Rebeca
  • Müller, A. J.
Over the past decade, the preparation of novel materials by enzyme-embedding into biopolyesters has been proposed as a straightforward method to produce self-degrading polymers. This paper reports the preparation and enzymatic degradation of extruded self-degradable films of three different biopolyesters: poly(lactic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT), and poly(butylene succinate) (PBS), as well as three binary/ternary blends. Candida antarctica lipase B (CalB) has been employed for the enzyme-embedding procedure, and to the best of our knowledge, the use of this approach in biopolyester blends has not been reported before. The three homopolymers exhibited differentiated degradation and suggested a preferential attack of CalB on PBS films over PBAT and PLA. Moreover, the self-degradable films obtained from the blends showed slow degradation, probably due to the higher content in PLA and PBAT. These observations pave the way for exploring enzymes capable of degrading all blend components or an enzymatic mixture for blend degradation., This research was funded by the projects MAT2017-83014- C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21, and PID2020-113045GB-C22 funded by MCIN/AEI/ 10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement no. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (RYC2018-025923-I from RyC program - MCIN/AEI/10.13039/501100011033 and FSE “invierte en tu futuro”). R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI- SusPlast+). We also acknowledge the Department of Materials Science and Engineering, Silpakorn University for sample fabrications.