Pasar al contenido principal

AUTOENSAMBLAJE INDUCIDO POR LA CRISTALIZACION DE COPOLIMEROS EN MASA, EN SOLUCIONES Y EN GELES

PID2020-113045GB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rheology Applied to Microgels: Brief (Revision of the) State of the Art

  • Echeverría, Coro
  • Mijangos, Carmen
The ability of polymer microgels to rapidly respond to external stimuli is of great interest in sensors, lubricants, and biomedical applications, among others. In most of their uses, microgels are subjected to shear, deformation, and compression forces or a combination of them, leading to variations in their rheological properties. This review article mainly refers to the rheology of microgels, from the hard sphere versus soft particles’ model. It clearly describes the scaling theories and fractal structure formation, in particular, the Shih et al. and Wu and Morbidelli models as a tool to determine the interactions among microgel particles and, thus, the viscoelastic properties. Additionally, the most recent advances on the characterization of microgels’ single-particle interactions are also described. The review starts with the definition of microgels, and a brief introduction addresses the preparation and applications of microgels and hybrid microgels., This work was funded by the MICINN (PID2020-113045GB-C2)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(PVDF)2(PEO)2 miktoarm star copolymers: Synthesis and isothermal crystallization leading to exclusive β-phase formation

  • María, Nicolás
  • Patil, Yogesh
  • Polymeropoulos, George
  • Peshkov, Anatoly
  • Rodionov, Valentin
  • Maiz, Jon
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
In this work, we study how chain topology can induce different polymorphic behaviors in poly(vinylidene fluoride) (PVDF)-based materials. A linear PVDF precursor with two azido groups at the junction point, (PVDFx-N3)2 and three 4-miktoarm star copolymers (PVDFx)2-b-(PEOy)2 with two poly(ethylene oxide) (PEO) and two PVDF arms were synthesized and employed in this study. The amphiphilic miktoarm copolymers were prepared by a combination of anionic ring-opening polymerization, iodine transfer radical polymerization (ITP), and copper-catalyzed azide-alkyne cycloaddition (CuAAC). They have practically similar overall molar mass but different compositions, ideal for performing bulk morphology and crystallization investigations. The isothermal overall crystallization kinetics of the PVDF and PEO arms of the 4-miktoarm star copolymers and representative PEO and PVDF precursors was determined by Differential Scanning Calorimetry (DSC). The results indicate that the star arms crystallized faster than the equivalent precursors as the kinetics are dominated by nucleation effects. The phases formed by the PVDF components in the materials examined were analyzed by studying their melting behavior by DSC, their superstructural morphology by Polarized Light Optical Microscopy (PLOM), and the phase structure by Fourier Transform Infrared Spectroscopy (FTIR). The linear PVDF and (PVDF29-N3)2, exhibited α, β and γ-phases (with a majority of β-phase formation) during melting after isothermal crystallization. The ratio of the different phases depends on the crystallization temperature. An analysis of the multiple melting behavior indicated that the sample forms both α and β-phases initially, and the α-phase partially transforms into the γ-phase during isothermal crystallization when the temperature of crystallization increases. We found a remarkable behavior for the 4-miktoarm star copolymers, as the PVDF arms only form the ferroelectric β-phase when all three materials were isothermally crystallized regardless of the crystallization temperature employed. The presence of the polymorphism in the PVDF was detected by DSC, PLOM, and FTIR. Hence, we have shown that tailoring chain topology in PVDF copolymers can lead to exclusive β-phase formation, a path that can be exploited for future piezoelectric applications., We acknowledge funding from MICINN through grant PID2020-113045GB-C21. We would also like to acknowledge the support of the Basque Government through grant IT1503-22. N. M. thankfully acknowledges his Ph.D. fellowship from the POLYMAT Basque Center for Macromolecular Design and Engineering. J. M. acknowledges partial financial support from the IBERDROLA Foundation. Y.P., G.P., A.P., V.R., and N.H. thankfully acknowledge the support of King Abdullah University of Science and Technology (KAUST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable enzymatic biodegradation of poly(butylene succinate): biobased coatings and self-degradable films

  • Peñas, Mario I.
  • Criado-González, Miryam
  • Martínez de Ilarduya, Antxon
  • Flores, Araceli
  • Raquez, Jean-Marie
  • Mincheva, Rosica
  • Müller, Alejandro J.
  • Hernández, Rebeca
Biodegradation of polyesters driven by enzymes is considered as one of the most effective way of degradation of these materials, as a way to control plastics accumulation in the environment. In this study, we present two different strategies to tune the enzymatic degradation of PBS films triggered by a lipase from Pseudomonas cepacia. Firstly, the kinetics of enzymatic degradation of PBS films was regulated by applying multilayer coats of polysaccharide alginate and chitosan (Alg/Chi) films. Secondly, self-degradable PBS films were prepared by embedding lipase-filled alginate particles. For comparison purposes, a detailed enzymatic degradation study of neat PBS films exposed to a lipase from P. cepacia in solution was made to determine the main experimental parameters influencing their degradation in solution. The results showed that an increase in enzyme concentration increased the degradation extent and rate of neat PBS films. At a fixed enzyme concentration, stirring of the solution containing the enzyme and the PBS also increased the biodegradation rate. In the case of the PBS films coated with a different number of Alg/Chi layers by spray-assisted LbL and subjected to enzymatic degradation experiments in solution, the extent of degradation was found to be dependent on the number of protective coating layers. Therefore, the Alg/Chi biobased coating constitutes an effective barrier to the diffusion of the lipase, thus proving its effectiveness in modulating the enzymatic activity as a function of coating thickness. In the case of self-degradable PBS containing lipase-embedded alginate beads (employed to protect the enzyme during high-temperature processing), only limited biodegradation was observed as the amount of encapsulated enzyme employed was too small. Nonetheless, these results are promising, as the enzymatic activity –indicative of the degradation capacity of the enzyme– determined for all these samples was about 2 orders of magnitude lower than that of previous assays., This research was funded by the projects MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). J.M.R. is a FRS-FNRS Senior Research Associate. Authors would also like to thank Dr. Ana Beloqui for helpful discussions on enzymatic activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of chain topology on gel formation and direct ink printing of model linear and star block copolymers with poly(ethylene oxide) and poly(ε-caprolactone) semi-crystalline blocks

  • Centeno, E.
  • Peñas, Mario I.
  • Zhan, P.
  • Mercado-Rico, J.
  • Matxinandiarena, E.
  • Zubitur, M.
  • Mugica, A.
  • Hadjichristidis, N.
  • Müller, A. J.
  • Hernández, Rebeca
In this work, a set of well-defined linear triblock copolymers and star block copolymers (3 and 4-arms) with semi-crystalline blocks consisting of poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL), synthesized by combining ring-opening polymerization and organic catalyst switch strategy, were studied as thermosensitive gel-forming biomaterials for applications in 3D extrusion printing. The hydrogels derived from linear copolymers underwent a temperature-dependent sol–gel–sol transition, behaving as a flowing sol at room temperature and transforming into a non-flowing gel upon heating. On the other hand, the hydrogels derived from 4-arm star block copolymers experienced a gel-sol transition and did not flow at room temperature. This behavior allowed them to be used as 3D printing inks at room temperature. 3D printing results revealed that the semi-crystalline hydrogels of the 4-arm star block copolymers could not only be extruded and printed with high shape fidelity, but they also exhibited a favorable dissolution profile for their use as sacrificial biomaterial inks. Additionally, we thoroughly investigated the crystalline organization of the PCL and the PEO blocks within the hydrogels through comparison with the results obtained in bulk. The results demonstrated evident structural ordering in the hydrogels associated with the crystallization of the PCL blocks. Unexpectedly, DSC results combined with SAXS experiments revealed the presence of PEO block crystals within the 30 % w/v hydrogels from 4-arm star block copolymers, in addition to the PCL block crystals. Hence, remarkable double crystalline hydrogels have been obtained for the first time., This research was financially supported by the projects PID2020- 113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. M.I.P. acknowledges funding through an FPI contract (PRE2018-086104) to develop a PhD thesis. The support of the ALBA (2022086944 and 2022086957 proposals) synchrotron facility is gratefully acknowledged. R.H. is a member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+) and the PTI CSIC FAB3D. The authors would also like to thank Alejandro Hernandez-Sosa for assistance regarding 3D printing experiments. P.Z., V.L., and N.H. gratefully acknowledge the support of the King Abdullah University of Science and Technology (KAUST).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composite nano-fibrillated cellulose-alginate hydrogels: Effect of chemical composition on 3D extrusion printing and drug release

  • Hernández-Sosa, Alejandro
  • Mercado-Rico, Jorge
  • Usala, Elena
  • Cataldi, G.
  • Esteban-Arranz, Adrián
  • Penott-Chang, E.
  • Müller, Alejandro J.
  • González, Zoilo
  • Espinosa, Eduardo
  • Hernández, Rebeca
In this work, composite hydrogels of nanofibrilated cellulose (CNF) and alginate were prepared through direct addition of alginate in powder to a CNF hydrogel. Alginate was hydrophobically modified with C8 alkyl chains (HMAlg), and the effect of chemical modification on the rheological properties and printability of the resulting composite gels was evaluated. The rheological characterization of the composite hydrogels indicated that the addition of alginate, non-modified and HMAlg, did not influence the zero-shear rate viscosity or the mechanical properties of the pristine CNF hydrogels. Printability tests showed that the incorporation of alginate, especially HMAlg, hindered the manufacture of well-defined 3D polymeric structures through 3D extrusion printing. This effect was much more pronounced with the incorporation of bovine serum albumin (BSA) into the gels, which was ascribed to the presence of interactions between the polymer matrix and the BSA. Finally, experiments of BSA release were run with 3D-printed samples, showing that controlled release could be achieved from CNFs gels., This research was funded by the projects PID2020-113045 GB-C21, PID2020-113365RA-I00 and PID2020-113045 GB-C22 funded by MCINN/AEI/10.13039/501100011033. R.H. and A. E-A. are members of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTISusPlast+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic Degradation Behavior of Self-Degradable Lipase-Embedded Aliphatic and Aromatic Polyesters and Their Blends

  • Peñas, Mario I.
  • Beloqui, A.
  • Martínez de Ilarduya, A.
  • Suttiruengwong, S.
  • Hernández, Rebeca
  • Müller, A. J.
Over the past decade, the preparation of novel materials by enzyme-embedding into biopolyesters has been proposed as a straightforward method to produce self-degrading polymers. This paper reports the preparation and enzymatic degradation of extruded self-degradable films of three different biopolyesters: poly(lactic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT), and poly(butylene succinate) (PBS), as well as three binary/ternary blends. Candida antarctica lipase B (CalB) has been employed for the enzyme-embedding procedure, and to the best of our knowledge, the use of this approach in biopolyester blends has not been reported before. The three homopolymers exhibited differentiated degradation and suggested a preferential attack of CalB on PBS films over PBAT and PLA. Moreover, the self-degradable films obtained from the blends showed slow degradation, probably due to the higher content in PLA and PBAT. These observations pave the way for exploring enzymes capable of degrading all blend components or an enzymatic mixture for blend degradation., This research was funded by the projects MAT2017-83014- C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21, and PID2020-113045GB-C22 funded by MCIN/AEI/ 10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement no. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (RYC2018-025923-I from RyC program - MCIN/AEI/10.13039/501100011033 and FSE “invierte en tu futuro”). R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI- SusPlast+). We also acknowledge the Department of Materials Science and Engineering, Silpakorn University for sample fabrications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed isodimorphic/isomorphic crystallization in aliphatic random copolycarbonates

  • Liao, Yilong
  • Pérez-Camargo, Ricardo A.
  • Ma, Tianyi
  • Maiz, Jon
  • Martínez de Ilarduya, Antxon
  • Sardón, Haritz
  • Liu, Guoming
  • Wang, Dujin
  • Müller, Alejandro J.
In this work, we investigate the crystallization behavior of two series of novel aliphatic random copolycarbonates: poly(heptamethylene-ran-octamethylene carbonate) (PC7/PC8) and poly(octamethylene-ran-dodecamethylene carbonate) (PC12/PC8). Both copolymers display apparent isodimorphic behavior as they crystallize over the entire composition range, exhibiting pseudoeutectic points at 45 and 76 mol % of PC8 content for PC7/PC8 and PC12/PC8, respectively. However, the evolution in melting enthalpies (ΔHm) and crystallinities (Xc) deviate from the expected pseudoeutectic behavior, indicating mixed isodimorphic/isomorphic crystallization, a behavior reported for the first time recently by us in poly(hexamethylene-ran-octamethyelene carbonate) (PC6/PC8). Further understanding of this behavior was obtained through structural and conformational characterization employing in situ synchrotron radiation wide- and small-angle X-ray scattering (WAXS/SAXS) and Fourier-transform infrared spectroscopy (FT-IR). For PC7/PC8 copolymers, a new third crystalline phase, from now on named the γ phase, different from PC7- and PC8-type crystalline phases (or any of their polymorphs: δ, α, and β), emerged for intermediate compositions, i.e., 34–45 mol % PC8, in line with the atypical variations of ΔHm and Xc. For PC12/PC8 copolymers, a coexistence of the γ/PC8 type phase was found at PC8-rich contents. According to FT-IR results, the γ phase adopted a polyethylene-like conformation in all cases despite the presence of C═O groups. However, compared with those compositions where homopolymer-like phases dominate the crystallization, there is a stronger dipole–dipole interaction in the γ phase, evidenced by a shift of absorption band associated with C═O stretching. This evidence aligns with our previous work in PC6/PC8 copolymers, demonstrating that the mixed isodimorphic/isomorphic crystallization found in PC8-based random copolycarbonates is likely a general case. Additionally, as the number of methylene groups in the repeating unit of the second comonomer in the PC8-based copolymers increases, the composition range where the γ phase is observed narrows. At the same time, the position of the pseudoeutectic point shifts toward compositions rich in PC8, demonstrating how the chemical structure affects the exact location of the pseudoeutectic point in these random copolycarbonates., This research was supported by the project PID2020-113045GB-C21, funded by MCIN/AEI/10.13039/501100011033, and by the Basque Government through grant IT1503-22. G.L. acknowledges the support from the National Natural Science Foundation of China (22273113). R.A.P.-C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). Y.L. thanks the China Scholarship Council (CSC) for funding his Ph.D. scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data employed in the study: 'Hexadecylamine addition promotes crystallization-driven functionalities in freezing-thawing PVA hydrogels'

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
[Description of methods used for collection/generation of data] All measurements were performed under standard conditions, except for those experiments involving temperature ramps., [Methods for processing the data] The data have been organized to improve visualization. Each .dat file in the WAXS dataset corresponds to one degree in the temperature ramp, e.g., 0000 = 10°C, 0001 = 11°C, ..., 0070 = 80°C, This dataset contains raw data from hydrogels obtained through freeze-thawing cycles of aqueous solutions of polyvinyl alcohol (PVA) and its blends with hexadecylamine. The data were collected using a range of experimental techniques including Wide Angle X-ray Scattering (WAXS), Raman spectroscopy, Differential Scanning Calorimetry (DSC), and rheological measurements., This research was financially supported by the projects PID2020-113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/ AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792, -WAXS_PVA_ASPREPARED -WAXS_PVA_PARTIALLYDRIED -WAXS_PVAC16_3_ASPREPARED - WAXS_PVAC16_3_PARTIALLYDRIED - ADHESION - DSC - RAMAN_SPECTRA - RHEOLOGY_STRAINFREQUENCY_ANNEALED - RHEOLOGY_STRAINFREQUENCY_ASPREPARED - RHEOLOGY_TEMPERATURE_ANNEALED - RHEOLOGY_TEMPERATURE_ASPREPARED, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hexadecylamine Addition Promotes Crystallization-Driven Functionalities in Freezing–Thaw PVA Hydrogels

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
Poly(vinyl alcohol) (PVA) is widely employed for hydrogel fabrication due to its ability to form stable, physically or chemically cross-linked three-dimensional networks. Among production methods, the freezing-thaw (F-T) technique stands out for its simplicity and effectiveness. This study presents a straightforward methodology for preparing functional PVA hydrogels in aqueous media by blending PVA with a crystallizable hexadecyl alkylamine (C16). Incorporating small amounts of hydrophobic, amphiphilic hexadecylamine into PVA hydrogels via freezing-thaw blending significantly alters crystallization and network structure, enabling gel formation in water without surfactants, solvents, or cross-linkers. C16 enhances phase separation and promotes PVA crystalline domains while remaining amorphous. The resulting PVA/C16 hydrogels exhibit enhanced thermomechanical properties, demonstrating additional functionalities such as self-healing and improved adhesion to polar surfaces. This crystallization-driven gelation via immiscible blending offers a scalable strategy with potential in wearable electronics, soft robotics, and biomedical devices., The authors acknowledge Enrique Blázquez for DSC measurements and Isabel Muñoz for Raman measurements. This research was financially supported by the projects PID2020113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Poly(lactic acid) stereocomplexes based molecular architectures: synthesis and crystallization

  • Michell Uribe, Rose Mary Rita|||0000-0002-8317-6663
  • Ladelta, Viko
  • da Silva, Edgar
  • Müller, Alejandro J.
  • Hadjichristidis, Nikos
This review presents the state of the art of complex macromolecular architectures based on polylactide stereocomplexes (PLA-sc) from the viewpoint of synthesis and crystallization. First, we discuss the nomenclature, synthesis, epimerization, and lactide (LA) properties as a bio-derived cyclic dimeric monomer comprising two chiral carbons. Among several polymerization methods, catalytic ring-opening polymerization (ROP) is the most common and versatile technique to access stereoregular (isotactic) PLA, which is the prerequisite to preparing PLA-sc. Combined with other living and controlled/living polymerization techniques, ROP of LA has yielded various PLA-sc-based macromolecular architectures, including copolymers, stars, graft, cyclic, brush, and hybrid materials. New approaches to synthesizing monodisperse discrete oligoLA are also discussed. We show that a small change in the architectures, microstructures, molecular weight, or other chemical and physical modifications affects the behavior of PLA-sc. Moreover, the crystallization of PLA-sc, after more than 30 years of study, still presents many challenges. The crystalline morphology is also a subject of debate. Recent findings suggest a new crystalline unit cell for PLA-sc. Adding a third component or changing chain architecture can significantly modify the properties of the formed PLA-sc. The complex relationship between flexibility, nucleation, diffusion, and the interactions needed for the joint crystallization of the enantiomers constitutes a very large source of variables. As a result, PLA-based stereocomplex materials can be tailored by manipulating one or several of these variables., All of the sources of funding for the work described in this pub- lication are acknowledged below: VL and NK thankfully acknowledge the support of King Abdul- lah University of Science and Technology (KAUST). This work has been supported by KAUST funding. AJM gratefully acknowledges funding from the Basque Government through Grant IT1309-19. This publication is part of the R+D+i project PID2020-113045GB- C21 funded by MCIN/AEI/10.13039/50110 0 011033/., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Poly(lactic acid) stereocomplexes based molecular architectures: synthesis and crystallization

  • Michell Uribe, Rose Mary Rita
  • Ladelta, Viko
  • da Silva, Edgar
  • Müller, Alejandro J.
  • Hadjichristidis, Nikos
This review presents the state of the art of complex macromolecular architectures based on polylactide stereocomplexes (PLA-sc) from the viewpoint of synthesis and crystallization. First, we discuss the nomenclature, synthesis, epimerization, and lactide (LA) properties as a bio-derived cyclic dimeric monomer comprising two chiral carbons. Among several polymerization methods, catalytic ring-opening polymerization (ROP) is the most common and versatile technique to access stereoregular (isotactic) PLA, which is the prerequisite to preparing PLA-sc. Combined with other living and controlled/living polymerization techniques, ROP of LA has yielded various PLA-sc-based macromolecular architectures, including copolymers, stars, graft, cyclic, brush, and hybrid materials. New approaches to synthesizing monodisperse discrete oligoLA are also discussed. We show that a small change in the architectures, microstructures, molecular weight, or other chemical and physical modifications affects the behavior of PLA-sc. Moreover, the crystallization of PLA-sc, after more than 30 years of study, still presents many challenges. The crystalline morphology is also a subject of debate. Recent findings suggest a new crystalline unit cell for PLA-sc. Adding a third component or changing chain architecture can significantly modify the properties of the formed PLA-sc. The complex relationship between flexibility, nucleation, diffusion, and the interactions needed for the joint crystallization of the enantiomers constitutes a very large source of variables. As a result, PLA-based stereocomplex materials can be tailored by manipulating one or several of these variables., All of the sources of funding for the work described in this pub- lication are acknowledged below: VL and NK thankfully acknowledge the support of King Abdul- lah University of Science and Technology (KAUST). This work has been supported by KAUST funding. AJM gratefully acknowledges funding from the Basque Government through Grant IT1309-19. This publication is part of the R+D+i project PID2020-113045GB- C21 funded by MCIN/AEI/10.13039/50110 0 011033/., Peer Reviewed, Postprint (published version)