Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Challenging isodimorphism concepts: Formation of three crystalline phases in Poly(hexamethylene-ran-octamethylene carbonate) copolymers

  • Liao, Yilong
  • Pérez Camargo, Ricardo Arpad
  • Sardon Muguruza, Haritz
  • Martínez de Ilarduya, Antxon
  • Hu, Wenxian
  • Liu, Guoming
  • Wang, Dujin
  • Müller Sánchez, Alejandro Jesús
In this work, poly(hexamethylene-ran-octamethylene carbonate) copolycarbonates were synthesized by melt polycondensation in a wide range of compositions. The copolymers displayed some of the characteristic isodimorphic thermal behavior, such as crystallization for all the compositions and a pseudoeutectic behavior of the melting temperature (Tm) versus composition. The pseudoeutectic point was located at 33 mol % poly(octamethylene carbonate) (POC) content (i.e., corresponding to the PH67O33C copolymer). Surprisingly, the crystallinities (Xc) for a wide range of copolymer compositions were higher than those of the parent components, a phenomenon that has not been observed before in isodimorphic random copolymers. The structural characterization, performed by wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering experiments, revealed unexpected results depending on composition. On the one hand, the poly(hexamethylene carbonate) (PHC)- and POC-rich copolymers crystallize in PHC- and POC-type crystals, as expected. Moreover, upon cooling and heating, in situ WAXS experiments evidenced that these materials undergo reversible solid–solid transitions [δ-α (PHC) and δ-α-β (POC)] present in the parent components but at lower temperatures. On the other hand, a novel behavior was found for copolymers with 33–73 mol % POC (including the pseudoeutectic point), which are those with higher crystallinities than the parent components. For these copolymers, a new crystalline phase that is different from that of both homopolymers was observed. The in situ WAXS results for these copolymers confirmed that this novel phase is stable upon cooling and heating and does not show any crystallographic feature of the parent components or their solid–solid transitions. FTIR experiments confirmed this behavior, revealing that the new phase adopts a polyethylene-like chain conformation that differs from the trans-dominant ones exhibited by the parent components. This finding challenges the established concepts of isodimorphism and questions whether a combination of crystallization modes (isodimorphism and isomorphism) is possible in the same family of random copolymers just by changing the composition., This research was financed by the project PID2020-113045GB-C21 funded by MCIN/AEI/10.13039/501100011033 and by the Basque Government through grant IT1503-22. This work is also supported by the National Natural Science Foundation of China (22273113, 51820105005). Y.L. thanks the China Scholarship Council (CSC) for funding his Ph.D. scholarship. R.A.P.-C. is supported by the ADAGIO-H2020-MSCA-COFUND-2020 program (101034379). The BSRF is acknowledged for providing the beamtime.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Bio-based non-isocyanate poly(hydroxy urethane)s (PHU) derived from vanillin and CO2

  • Fanjul Mosteirin, Marcos Noé
  • Polo da Fonseca, Lucas
  • Dove, Andrew
  • Sardon Muguruza, Haritz
As an alternative to the use of hazardous phosgene-based isocyanates for polyurethane preparation, non-isocyanate poly(hydroxy urethanes) (PHU) based on 5-membered cyclic carbonates have been developed. However, to date, most aromatic PHUs are oil-based or based on toxic precursors such as bisphenol-A. In this work, bio-based non-isocyanate poly(hydroxy urethanes) (PHUs) prepared from vanillin are reported for the first time. First, three different vanillin-derived bis-cyclic carbonates were synthesized. Subsequently, each monomer was reacted with two different bis-amines to yield six different PHUs, which were characterized in depth by 1H and 13C NMR spectroscopy, FTIR, SEC and DSC. PHUs based on vanillic acid were found to exhibit thermal properties superior to bisphenol A-based PHUs, with a Tg of around 66 °C. It is envisioned that vanillin-based PHUs could potentially be a safer alternative to harmful bisphenol A-based PHUs and provide a useful strategy for CO2 revalorization, especially considering that vanillin is an abundant byproduct of Kraft lignin production., The authors acknowledge financial support from the European Commission through SUSPOL-EJD 642671 project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 101034379. The authors acknowledge grant TED2021-129852B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed isodimorphic/isomorphic crystallization in aliphatic random copolycarbonates

  • Liao, Yilong
  • Pérez-Camargo, Ricardo A.
  • Ma, Tianyi
  • Maiz, Jon
  • Martínez de Ilarduya, Antxon
  • Sardón, Haritz
  • Liu, Guoming
  • Wang, Dujin
  • Müller, Alejandro J.
In this work, we investigate the crystallization behavior of two series of novel aliphatic random copolycarbonates: poly(heptamethylene-ran-octamethylene carbonate) (PC7/PC8) and poly(octamethylene-ran-dodecamethylene carbonate) (PC12/PC8). Both copolymers display apparent isodimorphic behavior as they crystallize over the entire composition range, exhibiting pseudoeutectic points at 45 and 76 mol % of PC8 content for PC7/PC8 and PC12/PC8, respectively. However, the evolution in melting enthalpies (ΔHm) and crystallinities (Xc) deviate from the expected pseudoeutectic behavior, indicating mixed isodimorphic/isomorphic crystallization, a behavior reported for the first time recently by us in poly(hexamethylene-ran-octamethyelene carbonate) (PC6/PC8). Further understanding of this behavior was obtained through structural and conformational characterization employing in situ synchrotron radiation wide- and small-angle X-ray scattering (WAXS/SAXS) and Fourier-transform infrared spectroscopy (FT-IR). For PC7/PC8 copolymers, a new third crystalline phase, from now on named the γ phase, different from PC7- and PC8-type crystalline phases (or any of their polymorphs: δ, α, and β), emerged for intermediate compositions, i.e., 34–45 mol % PC8, in line with the atypical variations of ΔHm and Xc. For PC12/PC8 copolymers, a coexistence of the γ/PC8 type phase was found at PC8-rich contents. According to FT-IR results, the γ phase adopted a polyethylene-like conformation in all cases despite the presence of C═O groups. However, compared with those compositions where homopolymer-like phases dominate the crystallization, there is a stronger dipole–dipole interaction in the γ phase, evidenced by a shift of absorption band associated with C═O stretching. This evidence aligns with our previous work in PC6/PC8 copolymers, demonstrating that the mixed isodimorphic/isomorphic crystallization found in PC8-based random copolycarbonates is likely a general case. Additionally, as the number of methylene groups in the repeating unit of the second comonomer in the PC8-based copolymers increases, the composition range where the γ phase is observed narrows. At the same time, the position of the pseudoeutectic point shifts toward compositions rich in PC8, demonstrating how the chemical structure affects the exact location of the pseudoeutectic point in these random copolycarbonates., This research was supported by the project PID2020-113045GB-C21, funded by MCIN/AEI/10.13039/501100011033, and by the Basque Government through grant IT1503-22. G.L. acknowledges the support from the National Natural Science Foundation of China (22273113). R.A.P.-C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). Y.L. thanks the China Scholarship Council (CSC) for funding his Ph.D. scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scattering of CO from vacant-MoSe2 with O adsorbates: Is CO2 formed?

  • Bombín, Raúl
  • Díez Muiño, Ricardo
  • Juaristi Oliden, Joseba Iñaki
  • Alducin Ochoa, Maite
Using ab initio molecular dynamics (AIMD) simulations, based on density functional theory that also accounts for van der Waals interactions, we study the oxidation of gas-phase CO on MoSe2 with a Se vacancy and oxygen coverage of 0.125 ML. In the equilibrium configuration, one of the O atoms is adsorbed on the vacancy and the other one atop one Se atom. Recombination of the CO molecule with the second of these O atoms to form CO2 is a highly exothermic reaction, with an energy gain of around 3 eV. The likeliness of the CO oxidation reaction on this surface is next examined by calculating hundreds of AIMD trajectories for incidence energies that suffice to overcome the energy barriers in the entrance channel of the CO oxidative recombination. In spite of this, no CO2 formation event is obtained. In most of the calculated trajectories, the incoming CO molecule is directly reflected, and in some cases, mainly at low energies, the molecules remain trapped at the surface but without reacting. As an important conclusion, our AIMD simulations show that the recombination of CO molecules with adsorbed O atoms is a very unlikely reaction in this system, despite its large exothermicity., Financial support provided by the Spanish MCIN/AEI/10.13039/501100011033/, FEDER Una manera de hacer Europa (Grant No. PID2022-140163NB-I00), Gobierno Vasco-UPV/EHU (Project No. IT1569-22), and the Basque Government Education Departments’ IKUR program, also cofunded by the European NextGenerationEU action through the Spanish Plan de Recuperación, Transformación y Resiliencia (PRTR). We also acknowledge the HPC resources provided by the Donostia International Physics Center (DIPC) Supercomputing Center. R.B. acknowledges funding from ADAGIO (Advanced Manufacturing Research Fellowship Programme in the Basque – New Aquitaine Region) from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska Curie cofund Grant Agreement No. 101034379., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(3-hexylthiophene) nanoparticles as visible-light photoinitiators and photosensitizers in 3D printable acrylic hydrogels for photodynamic therapies

  • Abalos, Rocío Natera
  • Aziz, Ilaria Abdel
  • Caverzan, Matías
  • Lochedino, Arianna Sosa
  • Ibarra, Luis E.
  • Gallastegui, Antonela
  • Chesta, Carlos A.
  • Gómez, M. Lorena
  • Mecerreyes, David
  • Palacios, Rodrigo E.
  • Criado-González, Miryam
The design of smart photoelectrodes capable of stimulating the localized production of reactive oxygen species (ROS) on demand is of great interest for redox medicine therapies. In this work, poly(3-hexylthiophene) semiconducting polymer nanoparticles (P3HT SPNs) are used with a dual role to fabricate light-responsive hydrogels. First, P3HT SPNs act as visible-light photoinitiators to induce the photopolymerization of acrylic monomers such as acrylamide (AAm), 2-(hydroxyethyl) acrylate (HEA), and poly(ethylene glycol) diacrylate (PEGDA). This leads to the formation of acrylic hydrogels loaded with the P3HT SPNs, as demonstrated by photo-rheology and infrared spectroscopy. Furthermore, P3HT SPNs are also successfully used as photoinitiators for digital light processing (DLP) 3D printing purposes to fabricate shape-defined intelligent hydrogels. Interestingly, P3HT SPNs retain their photoelectrochemical properties when embedded within the polymer hydrogels, showing photocurrent densities that range from ∼0.2 to ∼1.1 μA cm−2 depending on the intensity of the visible light-lamp (λ = 467 nm). Second, they can be used as photosensitizers (PS) to generate reactive oxygen species (ROS), 12-15 μM H2O2, on demand. The acrylic hydrogels containing P3HT SPNs do not exhibit cytotoxic effects under normal physiological conditions in the darkness against mouse glioma 261 (GL261) cells and S. aureus bacteria. However, they induce a ∼50% reduction GL261 cancer cell viability and a ∼99% S. aureus cell death in contact with them upon illumination (λ = 467 nm) due to the localized overproduction of ROS, which makes them attractive candidates for photodynamic therapies (PDT)., The authors acknowledge the grant PID2020–119026GB-I00 funded by MCIN/AEI/10.13039/501100011033. M. C.-G. thanks ‘‘Ayuda RYC2022-036380-I financiada por MICIU/AEI/10.13039/ 501100011033 y por el FSE +’’ and the Emakiker program of POLYMAT (UPV/EHU). This work was funded by the European Union under GA no. 101129945 ‘‘IONBIKE 2.0’’, and the Eur- opean Union’s Horizon 2020 research and innovation pro- gramme under the Marie Sklodowska-Curie grant agreement No. 101034379. Authors also appreciate financial support from SECyT UNRC (PPI 2024), ANPCyT (PICT 2020/3803) and CON- ICET (PIP 11220200102377CO01). R. N. A., M. C., A. S. L. thanks CONICET for his doctoral scholarships. C. A. C., M. L. G., and R. E. P. are permanent research staff of CONICET., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured films from poly(3-hexylthiophene)-graft-poly(ε-caprolactone) as light-responsive generators of reactive oxygen species

  • Ilaria, Abdel Aziz
  • Gabirondo, Elena
  • Flores, Araceli
  • Posadas, Pilar
  • Sardon, Haritz
  • Mecerreyes, David
  • Criado-González, Miryam
The design of smart photoelectrodes is used to modulate and control the spatio-temporal production of reactive oxygen species (ROS). In this work, we develop photoactive films with tunable nanostructured morphologies to favor ROS production via photostimulation. To that aim, we synthesized graft copoly- mers, made of poly(3-hexylthiophene) (P3HT) and poly(ε-caprolactone) (PCL), P3HT-g-PCL, which were employed to fabricate compact films by drop casting. The films were further subjected to a thermo-oxi- dative treatment in the presence of H2 O2 at 42 °C. This led to nanostructured films with a porosity (∼500 nm diameter and ∼70 nm height) controlled at specific copolymer compositions, as determined by atomic force microscopy (AFM). The nanostructured P3HT films possess higher storage moduli (E’) than flat P3HT films, as determined by nanoindentation measurements. Finally, the performance of nano- structured P3HT films as photoelectrodes is assessed in a three-electrode electrochemical cell upon visible-light irradiation (λ = 467 nm), leading to the spatiotemporal production of H2 O 2 at non-cytotoxic levels for future non-invasive redox medicine applications., The authors acknowledge the grants PID2020-119026GB-I00 and PID2020-117573GB-I00 funded by MCIN/AEI/10.13039/ 501100011033. M. C.-G. thanks “Ayuda RYC2022-036380-I financiada por MICIU/AEI /10.13039/501100011033 y por el FSE+” and the Emakiker program of POLYMAT (UPV/EHU). This work was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 101034379., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(3-hexylthiophene) as a versatile semiconducting polymer for cutting-edge bioelectronics

  • Abdel Aziz, Ilaria
  • Tullii, Gabriele
  • Antognazza, Maria Rosa
  • Criado-González, Miryam
Semiconducting polymers (SPs), widely used in organic optoelectronics, are gaining interest in bioelectronics owing to their intrinsic optical properties, conductivity, biocompatibility, flexibility, and chemical tunability. Among them, poly(3-hexylthiophene) (P3HT) has attracted great attention as a versatile SP, being both optically active and conductive, for the fabrication of smart materials (e.g., films and nanoparticles), allowing the modulation of their performance and final biomedical applications. This review article provides an overview of the design of different kinds of P3HT-based materials, from chemical properties to structural engineering, to be used as key opto-electronic components in the development of opto-transducers for the modulation of cell fate, as well as biosensors such as organic electrochemical transistors (OECTs) and organic field effect transistors (OEFTs). Finally, their foremost applications in the biomedical field ranging from tissue engineering to biosensing will be discussed, including the future perspectives of P3HT derivatives towards cutting-edge applications for bioelectronics, in which optoceutics plays a key role., This work received funding from European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101034379, and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program ‘‘LINCE’’ under Grant Agreement 803621. M.C.-G. thanks ‘‘Ayuda RYC2022036380-I financiada por MICIU/AEI/10.13039/501100011033 y por el FSE+’’ and the Emakiker program of POLYMAT (UPV/ EHU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can five chemically different lamellar crystals self-assemble in a single spherulite?

  • Matxinandiarena, Eider
  • Pérez-Camargo, Ricardo A.
  • Sebastián, Víctor
  • Zhang, Pengfei
  • Ladelta, Viko
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Semicrystalline polymers with multiple crystallizable blocks provide opportunities to develop materials with hierarchical structures and customized properties, but they also pose unique challenges for understanding their crystallization. In this work, we investigate the crystallization from a miscible melt of a pentablock quintopolymer composed of five potentially crystallizable and biocompatible blocks, composed of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), poly(L-lactide) (PLLA), and polyglycolide (PGA), with a composition optimized to allow the crystallization of all blocks. Using Differential Scanning Calorimetry, synchrotron Fourier Transform Infrared Spectroscopy, synchrotron in situ Wide-angle and Small-angle X-Ray Scattering, Transmission Electron Microscopy, and Polarized Light Optical Microscopy, we demonstrate that upon cooling from the melt, all covalently linked blocks crystallize in a well-defined sequence: PGA > PLLA > PE > PCL > PEO. During crystallization, well-developed pentacrystalline positive spherulites are produced. This unprecedented level of self-assembly reveals the potential of complex block polymers to design multifunctional crystalline materials., The support from King Abdullah University of Science and Technology (KAUST) under grant BAS/1/1342-01-01 is gratefully acknowledged and highly appreciated. This work has received funding from: the Department of Education of the Basque Government through grant no. IT1503-22, the NEFA074/01 - AcroBioPLAST project, which has been 65% co-financed by the European Union through the Interreg VI-A Spain-France-Andorra Programme (POCTEFA 2021-2027), the project PID2023-149734NB-C22 funded by MCIU/AEI/10.13039/501100011033, and the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. R.A.P.-C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). The authors performed the Synchrotron radiation WAXS/SAXS experiments at BL11-NCD-SWEET and FTIR at BL-01-MIRAS beamline at the ALBA Synchrotron (Proposal Numbers 2020024169 and 2024028137, respectively). We also acknowledge the collaboration of the ALBA Synchrotron radiation facilities staff, particularly Juan Carlos Martínez Guil. V.S. acknowledges Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033, PID2021-127847OB-I00, ELECMI and NANBIOSIS ICTSs., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Asymmetry and coverage dependence in two-pulse correlation measurements of CO photodesorption from Pd(111): Insights from theory

  • Bombín, Raúl
  • Muzas, Alberto S.
  • Serrano Jiménez, Alfredo
  • Juaristi Oliden, Joseba Iñaki
  • Alducin Ochoa, Maite
arXiv:2511.17042v1, Two-pulse correlation experiments performed using pulses of different intensities on Pd(111) with different CO coverages showed that the CO photodesorption probability depends on whether the strong or the weak pulse arrives first on the surface, with this difference being particularly large for the low-covered surface. Motivated by these experiments, we perform molecular dynamics simulations using a multicoverage potential energy surface that was previously constructed with the embedded atom neural network method. The process is modeled by combining the two-temperature model (2TM)—to describe the laser-excited electrons and phonons—and Langevin dynamics with electronic time-dependent temperature Te—to model the coupling of the nuclear degrees of freedom with the laser-excited electrons. We show that improving the energy balance description in 2TM—by including ab initio Te-dependent electronic heat capacity and electron–phonon coupling constant—is key to reproduce the asymmetry of the photodesorption probability Pdes between positive and negative time delays. Furthermore, we also explore possible reasons for the usual underestimation of Pdes at zero delay given by state-of-the-art calculations. In particular, we improve the description of the energy exchange between CO and the metal surface at high Te by including in the simulations a Te-dependent friction coefficient. The prediction for Pdes at zero delay in this case increases by an order of magnitude, reducing its discrepancy with the experimental value. Altogether, our results hint at the importance of accounting for the temperature dependence of the electronic structure and properties in describing the extreme conditions generated in 2PC experiments., The financial support was provided by the Spanish MCIN/AEI/10.130 39/501 100 011 033 and FEDER Una manera de hacer Europa (Grant No. PID2022-140163NB-I00), the Gobierno Vasco–UPV/EHU (Project No. IT1569-22), and the Basque Government Education Departments’ IKUR program, also co-funded by the European NextGenerationEU action under the Spanish Plan de Recuperación, Transformación y Resiliencia (PRTR). Computer resources were provided by the Donostia International Physics Center (DIPC) Supercomputing Center. R.B. acknowledges the funding from ADAGIO (Advanced Manufacturing Research Fellowship Program in the Basque–New Aquitaine Region), supported by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie COFUND Grant Agreement No. 101034379., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding enhanced melt memory in poly(octamethylene carbonate)-based random copolycarbonates with mixed isodimorphic/isomorphic crystallization

  • Liao, Yilong
  • Pérez-Camargo, Ricardo A.
  • Maiz, Jon
  • Müller, Alejandro J.
Poly(hexamethylene carbonate-ran-octamethylene carbonate) (PC6/PC8), poly(heptamethylene carbonate-ran-octamethylene carbonate) (PC7/PC8), and poly(dodecamethylene-ran-octamethylene carbonate) (PC12/PC8) are the first random copolymers known to crystallize with a mixed isodimorphic and isomorphic mode. Here, we investigate for the first time how this dual crystallization mode affects melt memory. Self-nucleation experiments, combined with synchrotron X-ray scattering, polarized light microscopy, and dielectric spectroscopy, show that crystallization in the isodimorphic mode decreases melt memory as the comonomer content increases, as expected. Conversely, compositions that crystallize in the isomorphic mode, where a new crystalline phase forms that is different from the parent components or their polymorphs, display increased melt memory, with Domain IIa widths─directly related to melt memory─reaching up to 30 °C, significantly surpassing those in homopolymers. This heightened melt memory is due to stronger intermolecular interactions within the new phase, as shown by higher dielectric constants. These results establish the crucial role of intermolecular interactions within the crystal lattice in determining enhanced melt memory in copolymers showing both isodimorphic and isomorphic crystallization, highlighting the critical role of comonomer incorporation in tuning crystallization behavior and melt memory., This work has received funding from the Department of Education of the Basque Government through grant no. IT1503-22, and from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. R.A.P.–C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). J.M. acknowledges support from the “Ramón y Cajal” Program, Grant No. RYC2023-044285-I, funded by MICIU/AEI/10.13039/501100011033 and ESF+. This work was also financially supported by the Opening Project of State Key Laboratory of Advanced Polymer Materials, Sichuan University (Grant No. sklapm2025-3-07). The authors performed synchrotron radiation WAXS/SAXS experiments at BL11-NCD-SWEET (Proposal Number 2024028078) beamline at the ALBA Synchrotron with the collaboration of ALBA staff., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescent Supramolecular Gels Based on D-Sorbitol Derivatives

  • Odella, Emmanuel
  • Criado-González, Miryam
  • Ponzio, Rodrigo A
  • Mecerreyes, David
  • Picchio, Matías L
  • Mantione, Daniele
Supramolecular gels formed by low-molecular-weight gelators (LMWGs) are valuable soft materials due to their remarkable versatility and wide range of applications. Developing ambidextrous LMWGs that self-assemble in diverse solvents remains challenging, as such versatility requires precise molecular engineering to ensure robust structuring across varying polarity and hydrogen-bonding environments. Here, we present a family of sugar-based molecules functionalized with naphthyl (DNapS), benzothiadiazole (DBTDS), and coumarin (MCumS) moieties, synthesized by a green, scalable method, which serve as fluorescent LMWGs. Their gelation abilities are evaluated in water, organic solvents of different polarities, and deep eutectic solvents (DES). Among them, MCumS forms gels in water, short-chain alcohols, and terpene-based hydrophobic DES, highlighting its potential as a rare example of an LMWG capable of gelation across chemically diverse environments. Morphological analysis of MCumS gels reveals fibrous network formation in water and distinct, solvent-dependent architectures in eutectogels. Interestingly, supramolecular gels based on this LMWG and zwitterionic DES show superior viscoelastic behavior and injectability. These findings not only expand the library of fluorescent LMWGs but also contribute to the fundamental understanding of structure-property relationships in versatile supramolecular gel systems., The authors thank for technical and human support provided bySGIker (UPV/EHU/ ERDF, EU). The authors also thank CIC bioma-GUNE for their valuable collaboration in the circular dichroism exper-iments. This work was funded by the European Union under theIONBIKE 2.0 project (grant agreement No. 101129945, https://doi.org/10.3030/101129945) and the European Union’s Horizon 2020 researchand innovation program under the Marie Sklodowska-Curie grantagreement No. 101034379. D. M., M. L. P., and D. M. gratefully acknowledge the financial support from IKERBASQUE-Basque Foundation for Science. M. C-G. thanks Grant RYC2022-036380-I fundedby MICIU/AEI/10.13039/501100011033 and FSE+, and Grant CNS2024-154833 funded by MICIU/AEI /10.13039/501100011033. M. L. P. gratefully acknowledges the financial support from the Basque Government,Department of Education (IT1766-22) and the Spanish Research Agency(AEI) (RYC2024-048187-I from the RyC program). D. M. thanked AyudaRYC2021-031668-I financed by MCIN/AEI/10.13039/501100011033 and bythe European Union Next Generation EU/PRTR. E. O. also appreciates the financial support from Agencia Nacional de Promoción Científica y Tecnológica (PICT 2021/589, PICTO 2022/65). E. O. is a permanentresearch staff member of CONICET-Argentina, Peer reviewed