Pasar al contenido principal

DISEÑO DE DISPOSITIVOS MEDICOS Y DESARROLLO DE RECUBRIMIENTOS BIOCIDAS ACTIVOS MEDIANTE SISTEMAS MICROFLUIDICOS

PID2021-127847OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 76
Encontrada(s) 1 página(s)

Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colistin-loaded aerosolizable particles for the treatment of bacterial respiratory infections

  • Landa, Guillermo
  • Alejo, Teresa
  • Sauzet, Theo
  • Laroche, Julian
  • Sebastián, Víctor
  • Tewes, Frederic
  • Arruebo, Manuel
Compared to parenteral administration of colistin, its direct pulmonary administration can maximize lung drug deposition while reducing systemic adverse side effects and derived nephrotoxicity. Current pulmonary administration of colistin is carried out by the aerosolization of a prodrug, colistin methanesulfonate (CMS), which must be hydrolized to colistin in the lung to produce its bactericidal effect. However, this conversion is slow relative to the rate of absorption of CMS, and thus only 1.4 % (w/w) of the CMS dose is converted to colistin in the lungs of patients receiving inhaled CMS. We synthesized several aerosolizable nanoparticle carriers loaded with colistin using different techniques and selected particles with sufficient drug loading and adequate aerodynamic behavior to efficiently deliver colistin to the entire lung. Specifically, we carried out (i) the encapsulation of colistin by single emulsion-solvent evaporation with immiscible solvents using polylactic-co-glycolic (PLGA) nanoparticles; (ii) its encapsulation using nanoprecipitation with miscible solvents using poly(lactide-co-glycolide)-block-poly(ethylene glycol) as encapsulating matrix; (iii) colistin nanoprecipitation using the antisolvent precipitation method and its subsequent encapsulation within PLGA nanoparticles; and (iv) colistin encapsulation within PLGA-based microparticles using electrospraying. Nanoprecipitation of pure colistin using antisolvent precipitation showed the highest drug loading (55.0 ± 4.8 wt%) and spontaneously formed aggregates with adequate aerodynamic diameter (between 3 and 5 μm) to potentially reach the entire lung. These nanoparticles were able to completely eradicate Pseudomonas aeruginosa in an in vitro lung biofilm model at 10 µg/mL (MBC). This formulation could be a promising alternative for the treatment of pulmonary infections improving lung deposition and, therefore, the efficacy of aerosolized antibiotics., Financial support from the Spanish Ministry of Science and Innovation (grant numbers PID2020-113987RB-I00, CTQ2017-84473-R and PID2021-127847OB-I00) is gratefully acknowledged. This manuscript is the result of the projects PDC2021-121405-I00 and PDC2022-133866-I00, founded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. The regional Governments of Aragon and Nouvelle-Aquitaine (by means of the Order PRE/2106/2017 and arrêté n°19000160 EMPIRE project) are also gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidating the mechanisms of action of antibiotic-like ionic gold and biogenic gold nanoparticles against bacteria

  • Paesa, Mónica
  • Remírez de Ganuza, Cristina
  • Alejo, Teresa
  • Yus, Cristina
  • Irusta, Silvia
  • Arruebo, Manuel
  • Sebastián, Víctor
  • Mendoza, Gracia
The antimicrobial action of gold depends on different factors including its oxidation state in the intra- and extracellular medium, the redox potential, its ability to produce reactive oxygen species (ROS), the medium components, the properties of the targeted bacteria wall, its penetration in the bacterial cytosol, the cell membrane potential, and its interaction with intracellular components. We demonstrate that different gold species are able to induce bacterial wall damage as a result of their electrostatic interaction with the cell membrane, the promotion of ROS generation, and the consequent DNA damage. In-depth genomic and proteomic studies on Escherichia coli confirmed the superior toxicity of Au (III) vs Au (I) based on the different molecular mechanisms analyzed including oxidative stress, bacterial energetic metabolism, biosynthetic processes, and cell transport. At equivalent bactericidal doses of Au (III) and Au (I) eukaryotic cells were not as affected as bacteria did, maintaining unaffected cell viability, morphology, and focal adhesions; however, increased ROS generation and disruption in the mitochondrial membrane potential were also observed. Herein, we shed light on the antimicrobial mechanisms of ionic and biogenic gold nanoparticles against bacteria. Under selected conditions antibiotic-like ionic gold can exert a strong antimicrobial activity while being harmless to human cells., Financial support from the Spanish Ministry of Science and Innovation (grant numbers PID2020-113987RB-I00, PID2021-127847OB-I00 and CTQ2017-84473-R) is gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund. We acknowledge the ELECMI-LMA-INA (University of Zaragoza, Spain), Nanbiosis ICTS, the Genomics Core Unit from Instituto de Investigaciones Biomédicas Alberto Sols (Madrid, Spain), and Cell Culture, Cell Separation and Flow Cytometry, Genomics and Proteomics Core Units from IACS/IIS Aragon for facilitating the access to their instruments and expertise. We would like to thank Dr. Gema Rodríguez-Tarduchy for helpful advice regarding genomics studies. M.P. and C.R. acknowledge the support from Aragon regional government (Orden CUS/581/2020 and Orden CUS/803/2021, respectively). G.M. gratefully acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

  • Quirós‐Ovies, Ramiro
  • Laborda, María
  • Martín Sabanés, Natalia
  • Martín-Pérez, Lucía
  • Moreno-Da Silva, Sara
  • Burzurí, Enrique
  • Sebastián, Víctor
  • Pérez, Emilio M.
  • Santamaría, Jesús
2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS2 to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS2 layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm2), and excellent quality (no significant MoO3 detected)., The authors acknowledge European Research Council (ERC-PoC-842606 (E.M.P.)); ERC-AdG-742684 (J. S.), MINECO (CTQ2017-86060-P and PID2020-116661RB-I00(E.M.P.)), MINECO (PID2021-127847OB-I00 (V.S.)), the Comunidad de Madrid (MAD2D-CM S2013/MIT-3007 (E.M.P.). IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, grant no. SEV-2016-0686). We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa”, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. N.M.S. acknowledges the MSCA program MSCA-IF-2019-892667. Finally, authors acknowledge Roberta Manno for her assistance in the microwave experiments and data analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid microwave heating and fast quenching for the highly efficient production of long-term stable supported Ag nanoclusters

  • Manno, Roberta
  • Ranjan, Prabhat
  • Sebastián, Víctor
  • Mallada, Reyes
  • Irusta, Silvia
  • Eycken, Erik V. van der
  • Santamaría, Jesús
Given the exciting potential of metallic clusters in a variety of fields, the development of novel preparation methods to accurately controlling the cluster size has become a research priority. Specifically, for catalytic applications, the synthesis and deployment of metallic nanoclusters on a proper substrate is perhaps the main bottleneck. Here, we have adopted an alternative reactor that uses simultaneous ice cooling and microwave heating (unlike water ice is a low microwave absorber) for the synthesis of Ag nanoclusters directly over a support with ordered mesopores (SBA-15). The reactor design exploits the selectivity of microwave heating, assuring a rapid localized nucleation followed by a nearly instantaneous quenching that largely avoids the aggregation of nascent clusters as well as Ostwald ripening mechanisms. We have compared this new synthesis approach with some previously reported methods for the production of supported silver nanoclusters: conventional batch reactor and also a continuous flow microreactor. The resulting Ag clusters were initially analyzed in terms of size distribution, textural properties and catalytic activity in the reduction of 4-nitrophenol. Finally, encouraged by the good results obtained, these nanoclusters were also employed in the production of different cyclic organic compounds, building blocks for pharmaceutical and photochemical applications. The nanoclusters displayed a high catalytic activity, lowering the metal loading required to achieve high yield and selectivity. Furthermore, the stabilization of the clusters over the mesoporous substrate allowed their reuse in several reaction cycles. In fact, the method produced exceptionally stable Ag clusters, whose catalytic properties were preserved even after one year of storage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 721290 (recipient RM and PR; experiments and writing). This publication reflects only the author’s view, exempting the Community from any liability. Project website: http://cosmicetn.eu/. V.S. acknowledged the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: PID2021-127847OB-I00. Financial support from CIBERBBN (initiative funded by the VI National R&D&i Plan 2008 −2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged (recipient VS,RM,SI, JS: experiments, writing and supervision). This paper has been supported by the RUDN University Strategic Academic Leadership Program (recipient EVdE; writing and supervision). ICTS ELECMI-LMA and NANBIOSIS are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-impact PLA in compatibilized PLA/PCL blends: Optimization of blend composition and type and content of compatibilizer

  • Fernández-Tena, Ainhoa
  • Otaegi, Itziar
  • Irusta, Silvia
  • Sebastián, Víctor
  • Guerrica-Echevarria, Gonzalo
  • Müller, Alejandro J.
  • Aranburu, Nora
In this work, the effectiveness of seven commercial compatibilizers is tested in polylactide (PLA)/poly(ε-caprolactone) (PCL) blends with different compositions to obtain a high-impact PLA. None of the compatibilizers is effective for 90/10 and 80/20 PLA/PCL compositions, as no improvement of the impact strength is observed. For the 70/30 composition, compatibilizers having glycidyl methacrylate (GMA) and acrylate groups in their structure are proved the most effective, as the morphological change towards co-continuity induced by them leads to significant impact strength improvements (of ≈345% and 90% with respect to the neat PLA and the noncompatibilized PLA/PCL 70/30 blend, respectively). The 70/30 PLA/PCL composition, as it shows the best balance of properties, and the best compatibilizer (ElvaloyPTW) are chosen to carry out the optimization of the compatibilizer content. It is found that adding 6 phr to the blend results in highly toughened and ductile blends while maintaining a high modulus and yield strength values. Larger compatibilizer contents lead to even higher impact strength values, but the low-strain mechanical properties are notably reduced. Thus, in this work, a simple and easily scalable method to produce high-impact PLA is shown, as it implies the compounding of three commercially available components without involving any toxic solvents., A.F.-T. acknowledges the grant from the University of the Basque Country (UPV/EHU) to perform her Ph.D. studies. The Basque Government funded this work through the grant IT1503-22. V.S. acknowledges the Spanish Ministry of Science and Innovation (grant number PID2021-127847OB-I00) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vine shoots-derived hard carbons as anodes for sodium-ion batteries: Role of annealing temperature in regulating their structure and morphology

  • Alvira, Darío
  • Antorán, Daniel
  • Vidal, Mariano
  • Sebastián, Víctor
  • Manyà, Joan J.
Sodium-ion batteries (SIBs) are considered one of the most promising large-scale and low-cost energy storage systems due to the abundance and low price of sodium. Herein, hard carbons from a sustainable biomass feedstock (vine shoots) were synthesized via a simple two-step carbonization process at different highest temperatures to be used as anodes in SIBs. The hard carbon produced at 1200 °C delivered the highest reversible capacity (270 mAh g−1 at 0.03 A g−1, with an acceptable initial coulombic efficiency of 71 %) since a suitable balance between the pseudographitic domains growth and the retention of microporosity, defects, and functional groups was achieved. A prominent cycling stability with a capacity retention of 97 % over 315 cycles was also attained. Comprehensive characterization unraveled a three-stage sodium storage mechanism based on adsorption, intercalation, and filling of pores. A remarkable specific capacity underestimation of up to 38 % was also found when a two-electrode half-cell configuration was employed to measure the rate performance. To avoid this systematic error caused by the counter/reference electrode polarization, we strongly recommend the use of a three-electrode setup or a full-cell configuration to correctly evaluate the anode response at moderate and high current rates., This work is part of the research projects PID2019-107737RB−I00and PID2021-127847OB-I00, funded by MCIN/AEI/10.13039/501100011033. The second project is also funded by “ERDF A way of making Europe”, by the European Union. The authors also acknowledge the funding from the Aragon Government (Ref. T22_23R). DA also acknowledges the funding from the Regional Government of Aragon (Spain) with a grant for postgraduate research contracts (2019–2023). LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Enhanced efficiency of Pd(0)-based single chain polymeric nanoparticles for in vitro prodrug activation by modulating the polymer’s microstructure

  • Deng, Linlin
  • Sathyan, Anjana
  • Adam, Catherine
  • Unciti-Broceta, Asier
  • Sebastián, Víctor
  • Palmans, Anja R. A.
Bioorthogonal catalysis employing transition metal catalysts is a promising strategy for the in situ synthesis of imaging and therapeutic agents in biological environments. The transition metal Pd has been widely used as a bioorthogonal catalyst, but bare Pd poses challenges in water solubility and catalyst stability in cellular environments. In this work, Pd(0) loaded amphiphilic polymeric nanoparticles are applied to shield Pd in the presence of living cells for the in situ generation of a fluorescent dye and anticancer drugs. Pd(0) loaded polymeric nanoparticles prepared by the reduction of the corresponding Pd(II)-polymeric nanoparticles are highly active in the deprotection of pro-rhodamine dye and anticancer prodrugs, giving significant fluorescence enhancement and toxigenic effects, respectively, in HepG2 cells. In addition, we show that the microstructure of the polymeric nanoparticles for scaffolding Pd plays a critical role in tuning the catalytic efficiency, with the use of the ligand triphenylphosphine as a key factor for improving the catalyst stability in biological environments., A.S., L.D., A.R.A.P., and A.U.-B. gratefully acknowledge funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement no. 765497 (THERACAT). C.A. and A.U.-B. thank EPSRC (EP/N021134/1 and EP/S010289/1) for funding. V.S. acknowledges funding from projects PID2021-127847OB-I00 MCIN/AEI/10.130 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 and Fundación Ramón Areces (XX concurso nacional-ciencias de la vida y la materia). We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa”, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable production of nanoemulsions by membrane-assisted nanoemulsification using novel aroma-based hydrophobic deep eutectic solvents for enhanced antifungal activities

  • Mondal, Suchintan
  • Syed, Usman T.
  • Pinto, E.
  • Leonardo, Inês C.
  • Romero, Pilar
  • Gaspar, Frédéric B.
  • Barreto Crespo, M. T.
  • Sebastián, Víctor
  • Crespo, João G.
  • Brazinha, Carla
Hydrophobic deep eutectic solvents (DESs), a recent class of green solvents, offer 100% atom economy, low cost, potential biodegradability, negligible toxicity and promising bioactivities. In this work, novel aroma-based therapeutic hydrophobic DESs were prepared and dispersed in aqueous media as nanoemulsions to potentiate biomedical applications, where polar media is encountered. A reusable microengineered stainless-steel isoporous membrane was fabricated by laser drilling technique. Three hydrophobic DESs, namely DES A (menthol and vanillin), DES B (menthol and raspberry ketone), and DES C (thymol and raspberry ketone) were prepared and emulsified in aqueous media by sustainable membrane emulsification technique. The optimised nanoemulsion (DES C-in-water) exhibited a monomodal size distribution with Zavg (size average) of 147 nm and polydispersity index of 0.22. From the application perspective, the formulated DES-in-water nanoemulsions and their constituents were evaluated for their antibacterial properties against Escherichia coli and Staphylococcus aureus. Additionally, antifungal properties of the DES-based emulsions were reported for the first time by testing them against four fungal strains, Aspergillus fumigatus, Candida albicans, Candida krusei, and Trichophyton mentagrophytes. The nanoemulsions were found to be exhibit antimicrobial effect and lesser quantities of individual compounds were needed in nanoemulsified state to show similar effects. Different 1D and 2D NMR techniques were successfully used to investigate the structural orientation and the inter and intramolecular interactions in the DES and emulsion systems, which revealed a probable cause for higher antimicrobial activity of DES C-based emulsions compared to its peers. Lastly, a synergistic effect of the components in nanoemulsions led to enhanced antimicrobial activities., SM acknowledges financial support from Fundação para a Ciência e a Tecnologia (FCT), Portugal for PhD grant SFRH/BD/146967/2019. This research was supported by the Associate Laboratory for Green Chemistry - LAQV which is financed by national funds from FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020). EP acknowledges support from national funds through FCT (Foundation for Science and Technology) within the scope of Base Funding UIDB/04423/2020 and UIDP/04423/2020 (CIIMAR). IL, FG, TC acknowledge funding from INTERFACE Programme, through the Innovation, Technology and Circular Economy Fund (FITEC), as well as iNOVA4Health [UIDB/04462/2020 and UIDP/04462/2020] and LS4FUTURE [LA/P/0087/2020] programs financially supported by FCT and the Ministério da Ciência, Tecnologia e Ensino Superior (MCTES). PR acknowledges financial support Grant PID2021-126132NB-I00 by MCIN/AEI/10.13039/501100011033 and the NMR Service of CEQMA (CSIC-UZ). VS acknowledges financial support Grant PID2021-127847OB-I00 and PDC2022-133866-I00 by MCIN/AEI, as well the ELECMI (LMA node) and NANBIOSIS ICTSs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic synthesis of PLGA nanoparticles enabled by an ultrasonic microreactor

  • Udepurkar, Aniket Pradip
  • Mampaey, Laura
  • Clasen, Christian
  • Sebastián, Víctor
  • Kuhn, Simon
We present an ultrasonic microreactor for synthesising poly(lactic-co-glycolic) acid (PLGA) nanoparticles through the emulsion-solvent evaporation technique. Monodispersed PLGA nanoparticles (polydispersity index (PDI) < 0.3) in the size range of 20–300 nm are desired for biomedical applications. An ultrasonic microreactor with rough microchannels is utilised for the synthesis of PLGA nanoparticles. Through a comprehensive parametric investigation, we identify the optimal ultrasonic power, PLGA concentration, and aqueous-to-organic phase flow rate ratio, to minimise the size of the PLGA nanoparticles. By varying the operational parameters and the concentration of PLGA, the mean hydrodynamic diameter of the monodispersed PLGA nanoparticles (PDI of 0.1–0.2) can be varied within the range of 115–150 nm. Furthermore, the successful encapsulation of a hydrophobic dye, Nile Red, is demonstrated, where a dye loading (DL) of up to 0.34% is achieved, which is in agreement with the previously reported loading of Nile Red. The in vitro release study performed for the Nile Red-loaded PLGA nanoparticles (NR-PLGA) reveals a triphasic release profile of Nile Red. In summary, this work highlights the potential of the ultrasonic microreactor as a versatile platform for the synthesis of PLGA nanoparticles suitable for biomedical applications., The authors acknowledge funding from the Research Foundation Flanders (G0B5921N, G088922N). The authors would like to thank Suqi Zhang for his assistance with the GPC measurements and Prof. Erin Koos and Yanshen Zhu for the access and assistance with the DLS measurements. VSC acknowledges the financial support by the Spanish Ministry of Science and Innovation (grant number PID2021-127847OB-I00), NextGenerationEU/PRTR project: PDC2022-133866-I00, CIBER-BBN and ELECMI and NANBIOSIS ICTSs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanomedicine targeting cuproplasia in cancer: labile copper sequestration using polydopamine particles blocks tumor growth in vivo through altering metabolism and redox homeostasis

  • Bonet-Aleta, Javier
  • Encinas-Giménez, Miguel
  • Oi, Miku
  • Pezacki, Aidan T.
  • Sebastián, Víctor
  • Martino, Alba de
  • Martín-Pardillos, Ana
  • Martín-Duque, Pilar
  • Hueso, José L.
  • Chang, Christopher J.
  • Santamaría, Jesús
Copper plays critical roles as a metal active site cofactor and metalloallosteric signal for enzymes involved in cell proliferation and metabolism, making it an attractive target for cancer therapy. In this study, we investigated the efficacy of polydopamine nanoparticles (PDA NPs), classically applied for metal removal from water, as a therapeutic strategy for depleting intracellular labile copper pools in triple-negative breast cancer models through the metal-chelating groups present on the PDA surface. By using the activity-based sensing probe FCP-1, we could track the PDA-induced labile copper depletion while leaving total copper levels unchanged and link it to the selective MDA-MB-231 cell death. Further mechanistic investigations revealed that PDA NPs increased reactive oxygen species (ROS) levels, potentially through the inactivation of superoxide dismutase 1 (SOD1), a copper-dependent antioxidant enzyme. Additionally, PDA NPs were found to interact with the mitochondrial membrane, resulting in an increase in the mitochondrial membrane potential, which may contribute to enhanced ROS production. We employed an in vivo tumor model to validate the therapeutic efficacy of PDA NPs. Remarkably, in the absence of any additional treatment, the presence of PDA NPs alone led to a significant reduction in tumor volume by a factor of 1.66 after 22 days of tumor growth. Our findings highlight the potential of PDA NPs as a promising therapeutic approach for selectively targeting cancer by modulating copper levels and inducing oxidative stress, leading to tumor growth inhibition as shown in these triple-negative breast cancer models., We gratefully acknowledge financial support from the European Research Council (ERC Advanced Grant CADENCE number 742684 to J.S.) and the National Institutes of Health (GM 79465 and GM 139245 to C.J.C.). C.J.C. is a CIFAR Fellow. VS acknowledges funding from project PID2021-127847OB-I00 MCIN/AEI/10.130 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033. The TEM measurements were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia y Materiales de Aragon, Universidad de Zaragoza, Spain. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). J.B.-A. acknowledges the Spanish Government for an FPU predoctoral contract. M.E.-G. acknowledges the Diputacion General de Aragon (DGA) for a predoctoral contract. The authors thank the Scientific and Technical Services at CIBA (IACS) in particular veterinary services, cell culture and microscopy. P. M.-D. acknowledges funding from Instituto de Salud Carlos III (ISCIII) (PI19/01007 and DTS21/00130) and ASPANOA and AECC grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of a hybrid CuS-ICG polymeric photosensitive vector and its application in antibacterial photodynamic therapy

  • Yus, Cristina
  • Alejo, Teresa
  • Quílez, Cristina
  • Irusta, Silvia
  • Velasco, Diego
  • Arruebo, Manuel
  • Sebastián, Víctor
At the present time, owing to the extremely high growth of microbial resistance to antibiotics and, consequently, the increased healthcare associated costs and the loss of efficacy of current treatments, the development of new therapies against bacteria is of paramount importance. For this reason, in this work, a hybrid synergetic nanovector has been developed, based on the encapsulation of a NIR (near infrared) photosensitive molecule (indocyanine green, ICG) in biodegradable polymeric nanoparticles (NPs). In addition, copper sulfide nanoparticles (CuS NPs), optically sensitive to NIR, were anchored on the polymeric nanoparticle shell in order to boost the generation of reactive oxygen species (ROS) upon NIR irradiation. As a result, the nanohybrid synthesized material is capable to generate ROS on demand when exposed to a NIR laser (808 nm) allowing for the repeated triggering of ROS production upon NIR light exposure. After each irradiation, the ROS generated were able to eliminate pathogenic bacteria, as it was demonstrated in-vitro with three bacterial strains, Staphylococcus aureus ATCC 25923 used as a reference strain (S. aureus), S. aureus USA300 (methicillin-resistant strain, MRSA) and GFP-expressing antibiotic-sensitive S. aureus (methicillin-sensitive strain, MSSA). Finally, the effect of the hybrid NPs in the skin bed was tested on a plasma-derived in vitro skin model. Fluorescence and histological images showed the presence of CuS NPs all over the dermal layer lacking epidermis of the skin construct. Thus, the in vitro model facilitated the prediction of the nanovector’s behavior in a human skin equivalent, showcasing its potential application against topical infections after wounding., This research was funded by the Spanish Ministry of Science and Innovation (grants numbers PID2021-127847OB-I00 and PID2020-113987RB-I00). We also acknowledge the financial support of MCIN/AEI/10.13039/501100011033 and the NextGenerationEU/PRTR thanks to the projects PDC2022-133866-I00 and PDC2021-121405-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008 -2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the Fondo Europeo de Desarrollo Regional (Feder). NANBIOSIS and LMA- ELECMI ICTS (University of Zaragoza, Spain) are also acknowledged. Authors would like to acknowledge the use of Servicios Científico Técnicos del CIBA (IACS-Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High performing and sustainable hard carbons for Na-ion batteries through acid-catalysed hydrothermal carbonisation of vine shoots

  • Alvira, Darío
  • Antorán, Daniel
  • Darjazi, Hamideh
  • Elia, Giuseppe Antonio
  • Gerbaldi, Claudio
  • Sebastián, Víctor
  • Manyà, Joan J.
This study investigates the synthesis of hard carbons via acid-assisted hydrothermal carbonisation (HTC) of vine shoots, followed by thermal annealing, to be used as Na-ion battery anodes. Various carbons with diverse pore structures, ordering degrees, 2D morphologies, and chemical compositions are obtained using 2 mol dm−3 solutions of HNO3, HCl, H2SO4, or H3PO4 as the hydrothermal media. Compared to standard ester-based liquid electrolytes, the use of a diglyme-based electrolyte (NaPF6/DGM) substantially boosts both the initial coulombic efficiency (ICE) and the specific capacity, particularly evident with the highly ordered and porous H3PO4-1000 and HCl-1000 carbons. These materials exhibit outstanding performance, storing 200 mAh g−1 at 2 A g−1 and showing ICE values of 68% and 77%, respectively. The improved stability and capacity are attributed to the formation of a more stable and thinner solid electrolyte interface (SEI), along with sodium storage into graphitic regions through a solvent co-intercalation reaction. While ester-based electrolytes limit hard carbon mesoporosity and require the promotion of turbostratic domains, ether-based electrolytes enable the development of more ordered and porous carbons, enhancing transport kinetics, sodium storage capacity, and electrode stability. Overall, acid-catalysed HTC offers a sustainable pathway for tailoring hard carbon based electrodes, repurposing biomass residues into valuable materials for green and low-cost energy storage applications., This work is part of the research project PID2022-137218OB-I00, funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. VS acknowledge funding from project PID2021-127847OB-I00 MCIN/AEI/10.130 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033. The authors also acknowledge the funding from the Aragon Government (Ref. T22_23R). DA also acknowledges the funding from the Regional Government of Aragon (Spain) with a grant for postgraduate research contracts (2019–2023). LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. This study was also carried out under the MOST – Sustainable Mobility Center and received funding from the European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA – PNRR eMission 4, Component 2, Investment 1.4 and D.D. 1033 17/06/2022 of the Ministero dell’Università e della Ricerca (MUR), CN00000023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance of a helical insert in a commercial tubing as a passive micromixer to produce nanoparticles using an emulsification approach

  • Abengochea-Quílez, Lucia
  • Pina-Artal, Santiago
  • Gonzalez, Victor
  • Sebastián, Víctor
This article is part of the themed collection: In Celebration of Klavs Jensen’s 70th Birthday., Chemical reactions with very fast kinetics, such as nanomaterial production, depend on mixing conditions to control reactant conversion and product selectivity. Mixing at the molecular level (micromixing) is an important stage in the operation of chemical engineering and process technology, with a strong influence on the selectivity, yield, and quality of final products. Micromixers have demonstrated excellent mixing capabilities in many physical and chemical methods. In this study, a new type of passive micromixer based on a helical insert was microfabricated. Interestingly, the micromixer is easy to be assembled into conventional tubings widely used in microfluidics and has no moving parts. The proposed microsystem is robust, compact, and has a modular design that enables the proper combination of mixing units for the on-demand tuning of mixing requirements. Finally, the helical insert could be easily regenerated in the case of fouling. The mixing efficiency of the proposed insert was validated using an acetal cleavage method and was finally successfully tested in the production of single emulsions to form polymeric nanoparticles of high interest in biomedicine. The mixing efficiency of the proposed micromixers is as good as the ones currently used and also offers a plethora of advantages that are not feasible in current systems., VS acknowledge funding from project PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR). We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) ‘Una manera de hacer Europa’, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable conversion of vine shoots and pig manure into high-performance anode materials for sodium-ion batteries

  • Alvira, Darío
  • Antorán, Daniel
  • Darjazi, Hamideh
  • Elia, Giuseppe Antonio
  • Sebastián, Víctor
  • Manyà, Joan J.
Sodium-ion batteries (SIBs) are considered promising candidates for future grid energy storage, with hard carbons emerging as key commercial anode materials. This study presents a novel approach to synthesize N-doped hard carbons via co-hydrothermal treatment of vine shoots and pig manure and subsequent thermal annealing of the resulting hydrochar. This method enhances the development of micro- and ultra-microporosity in the synthesized hard carbons, with nitrogen, and to a lesser extent phosphorus and sulfur, introduced as doping elements. Furthermore, the incorporation of hydrochloric acid during the hydrothermal step promotes biomass hydrolysis, leading to increased mesoporosity and the formation of microsphere clusters. In the realm of electrochemical performance, an investigation into various ester- and ether-based electrolytes has revealed NaPF6 in diglyme as the best formulation, thanks to its thinner and more stable solid electrolyte interface (SEI). Using this electrolyte, the best-performing electrode showed an initial Coulombic efficiency (ICE) of 73 %, with reversible capacities of 239, 180, 86, and 57 mAh g−1 at 0.1, 1, 5, and 10 A g−1, respectively. In addition, the electrode exhibited a remarkable capacity retention of 88 % after 250 cycles as well as a compatible behavior when paired with a NVPF-based cathode., This work is part of the research project PID2019-107737RB-I00, funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. VS acknowledge funding from project PID2021-127847OB-I00 MCIN/AEI/10.130 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033. The authors also acknowledge the funding from the Aragon Government (Ref. T22_23R). DA also acknowledges the funding from the Regional Government of Aragon (Spain) with a grant for postgraduate research contracts (2019–2023). LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards achieving circular economy in the production of silica from rice husk as a sustainable adsorbent

  • Rodriguez-Otero, Alba
  • Galarneau, Anne
  • Drané, Méghane
  • Vargas, Vicmary
  • Sebastián, Víctor
  • Wilson, Andrew
  • Grégoire, David
  • Radji, Sadia
  • Marias, Frederic
  • Christensen, Jan H.
  • Bouyssiere, Brice
This article belongs to the Section Sustainable Processes., The growing concern over water pollution and waste management requires innovative solutions that promote resource efficiency within a circular economy. This study aims to utilize rice husk (RH) as a sustainable feedstock to develop highly porous silica particles and generate valuable by-products, addressing the dual challenges of waste reduction and water contamination. We hypothesize that optimizing the production of amorphous silica from acid-washed RH will enhance its adsorptive properties and facilitate the concurrent generation of bio-oil and syngas. Amorphous silica particles were extracted from acid-washed RH with a yield of 15 wt% using a combination of acid washing at 100 °C, pyrolysis at 500 °C, and calcination at 700 °C with controlled heating at 2 °C/min. The optimized material (RH2-SiO2), composed of small (60–200 nm) and large (50–200 µm) particles, had a specific surface area of 320 m2/g, with funnel-shaped pores with diameters from 17 nm to 4 nm and showed a maximum cadmium adsorption capacity of 407 mg Cd/g SiO2. Additionally, the pyrolysis process yielded CO-rich syngas and bio-oil with an elevated phenolic content, demonstrating a higher bio-oil yield and reduced gas production compared to untreated RH. Some limitations were identified, including the need for bio-oil upgrading, further research into the application of RH2-SiO2 for wastewater treatment, and the scaling-up of adsorbent production. Despite the challenges, these results contribute to the development of a promising adsorbent for water pollution control while enhancing the value of agricultural waste and moving closer to a circular economy model., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 945416. V. Sebastian acknowledges the financial support by the Spanish Ministry of Science and Innovation (grant number PID2021-127847OB-I00) and the access to the “Advanced Microscopy Laboratory” ELECMI-LMA and NANBIOSIS ICTSs. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund. Development Fund. D. Grégoire acknowledges the financial support of the Investissement d’Avenir French programme (ANR-16-IDEX-0002) under the framework of the E2S UPPA hub Newpores., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradable ureido-polycarbonate block copolymers with a complex UCST thermoresponse

  • Martín-Martín, Javier
  • Abad, Miriam
  • Lopez de Pariza, Xabier
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Sardon, Haritz
  • Sebastián, Víctor
  • Oriol, Luis
  • Piñol, Milagros
In this work, amphiphilic block copolymers (BCs) consisting of a hydrophilic poly(ethylene glycol) methyl ether (PEG) and a degradable polycarbonate block derived from 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) with pendant ureido units, along with corresponding homopolycarbonates are described. Polymers are synthesized by combining ring opening polymerization (ROP) and thiol-ene/yne functionalization to incorporate UCST-promoting ureido groups. For homopolycarbonates, increasing the ureido groups density along the polymer chain facilitates the upper critical solution temperature (UCST)-type thermoresponse in water. Because of their amphiphilic character, BCs form stable self-assemblies either by direct dispersion in water, co-solvent method or microfluidics. Upon heating, these self-assemblies swell, and collapse due to extensive hydration of the polycarbonate block, rather than becoming solubilized. Thermoresponsiveness is analyzed in terms of the number of ureido groups in the polycarbonate for a given polycarbonate block length as well as the length of polycarbonate block. As a proof of concept, the potential of these self-assemblies as thermoresponsive drug nanocarriers is evaluated, using curcumin as a hydrophobic model drug., This work was financially supported by MICIN/AEI (PDI2021-1261132NB-100 and PID2021-127847OB-I00) and Gobierno de Aragón-FSE(LMP93_21 and E47_23R). INMA authors acknowledge grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. JMM acknowl-edges MICIN/AEI his FPI PhD grant. Authors would like to acknowledgethe use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza, NAMBIOSIS and ELECMI-Laboratorio de Microscopías Avanzadas-LMA (INMA-Unizar) and Servicios Científicos Técnicos ofCEQMA (CSIC-Unizar). The authors would also like to thank Dr. P.Romero for her invaluable guidance in the NMR studies. CSIC-ConexiónNanomedicina is also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Drug delivery applications of hydrophobic deep eutectic solvent-in-water nanoemulsions: A comparative analysis of ultrasound emulsification and membrane-assisted nanoemulsification

  • Syed, Usman T.
  • Calzada-Funes, Javier
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Piacentini, Emma
  • Giorno, Lidietta
  • Crespo, João G.
  • Brazinha, Carla
  • Sebastián, Víctor
The emergence of green chemistry and engineering principles to enforce sustainability aspects has ensured the prevalence of green solvents and green processes. Our study addresses this quest by exploring drug delivery applications of hydrophobic deep eutectic solvents (DESs) which are alternative green solvents. Initially, this work showcases the hydrophobic drug solubilization capabilities of a natural hydrophobic DES, menthol, and decanoic acid. To consider biomedical applications wherein polar media are encountered, this work further demonstrates the potential drug delivery application of these systems by encapsulating the anti-inflammatory local anesthetic lidocaine in hydrophobic DES-in-water nanoemulsions. NMR studies confirm the high solubility of the hydrophobic drug in hydrophobic DES comprising menthol and decanoic acid (1:2 molar ratio). Ultrasound emulsification and energy-efficient membrane emulsification techniques were employed to disperse 4% (v/v) DES into a 2% (w/w) Tween 20 surfactant aqueous solution. An isoporous microengineered membrane (nominal pore size ∼ 9 μm) was used to produce lidocaine-loaded DES-based nanoemulsions. Such membrane-assisted nanoemulsification was possible because the hydrophobic DES exhibits relatively low interfacial tension with the continuous phase and acts as a cosurfactant. Moreover, increased concentrations of lidocaine within the DES resulted in a further decrease in the interfacial tension and a lower melting point. Among the kinetic models analyzed to evaluate the release of lidocaine encapsulated in hydrophobic DES-in-water nanoemulsions, the Korsmeyer-Peppas kinetic model provided the best fit. The release constant "n" of <0.5 indicates that the drug release mechanism is predominantly governed by diffusion. Additionally, cytotoxicity against various human cell lines demonstrated the nanoemulsion's potential for anti-inflammatory drug delivery applications. Consequently, the nanoemulsion of DES presents a promising solution for the effective loading and delivery of poorly soluble drugs. This innovative approach enhances drug solubility and bioavailability, providing a versatile platform for controlled drug release. By leveraging the advantages of nanoemulsion technology, our study underscores the potential of DES-based formulations to promote drug delivery systems across a variety of therapeutic applications., The authors would like to acknowledge the Executive Agency for Education, Audiovisual, and Culture (EACEA) of the European Commission for the scholarship grant of Erasmus Mundus Doctorate in Membrane Engineering (EUDIME) program to Syed Usman Taqui. Prof. Reyes Mallada and Dr. Ruth Lahoz from the Nanoscience Institute of Aragon (INA), University of Zaragoza, are acknowledged for their unconditional support in fabrication and characterization of metallic membranes. This work was also supported by the Associate Laboratory for Green Chemistry-LAQV which is financed by national funds from FCT/MCTES (UIDB/50006/2020). V.S. acknowledges the financial support by the Spanish Ministry of Science and Innovation (grant no. PID2021-127847OB-I00). We also acknowledge the financial support of the NextGenerationEU/PRTR thanks to the project: PDC2022-133866-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program. G.M. gratefully acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III). INMA researchers thank the Severo Ochoa Grant CEX2023-001286-S funded by MICIU/ AEI/10.13039/501100011033. Authors thank the “Advanced Microscopy Laboratory” ELECMI and NANBIOSIS ICTSs, for access to their instruments. Part of the work was supported within the Bio4Mem project (CNR-DCM.AD006.234)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable synthesis of heteroatom-doped carbons from waste hemp hurd with enhanced sodium-ion and potassium-ion storage capabilities

  • Antorán, Daniel
  • Alvira, Darío
  • Sebastián, Víctor
  • Manyà, Joan J.
In this study, we applied an easily scalable two-step process comprising hydrothermal pretreatment with simultaneous mild heteroatom doping (N, N-S, and N-P) followed by carbonization at 800 °C to synthesize hard carbons (HCs) from waste hemp hurd for Na-ion and K-ion storage. The proposed synthesis pathway represents a viable alternative to the more energy-intensive, environmentally harmful, and/or challenging to scale up processes reported in the literature. The resulting carbons, particularly the dual NP-doped and single N-doped varieties, demonstrated improved electrochemical performance in terms of specific capacity (indicating more reversible ion storage sites) and rate capability (reflecting faster ion transport kinetics). These enhancements can be attributed to structural and surface chemistry modifications introduced during hydrothermal pretreatment. For Na-ion storage, the N-doped HC achieved a specific capacity of 293.6 mAh g−1 at 0.1 A g−1 (and 125 mAh g−1 at 1 A g−1) with an initial coulombic efficiency (ICE) of 73.5 % using an ester-based electrolyte. The same material showed an enhanced rate capability when an ether-based electrolyte was employed, achieving 155 mAh g−1 at 1 A g−1. For K-ion half-cells, the dual N-P-doped HC exhibited the best performance at low current rates, delivering a specific capacity of 260 mAh g−1 at 0.1 A g−1 in ester-based electrolytes. However, the N-doped HC showed the best rate capability at 2 A g−1 (57 mAh g−1), which is a reasonable value given the lack of mesopores in produced HCs., This work is part of the research project PID2022-137218OB-I00, funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. VS acknowledges financial support from the research projects PID2021-127847OB-I00 and PDC2022-133866-I00 (MCIN/AEI/10.13039/501100011033), as well as NANBIOSIS and LMA-ELECMI ICTS. The authors also acknowledge the funding from the Aragon Government (Ref. T22_23 R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2 methanation over Ni catalysts supported on Pr-doped CeO2 nanostructures synthesized via hydrothermal and co-precipitation methods

  • Tsiotsias, Anastasios I.
  • Charisiou, Nikolaos D.
  • Dabbawala, Aasif A.
  • Hussien, Aseel G.S.
  • Sebastián, Víctor
  • Hinder, Steven J.
  • Baker, Mark A.
  • Mao, Samuel
  • Polychronopoulou, Kyriaki
  • Goula, Maria A.
This article belongs to the Special Issue Advances in Nanomaterials for Energy Conversion and Environmental Catalysis: Second Edition., Dataset available on request from the authors., The synthesis method of the Pr-doped CeO2 catalyst support in Ni/Pr-CeO2 CO2 methanation catalysts is varied by changing the type/basicity of the precipitating solution and the hydrothermal treatment temperature. The use of highly basic NaOH as the precipitating agent and elevated hydrothermal treatment temperature (100 or 180 °C) leads to the formation of structured Pr-doped CeO2 nanorods and nanocubes, respectively, whereas the use of a mildly basic NH3-based buffer in the absence of hydrothermal treatment (i.e., co-precipitation) leads to an unstructured mesoporous morphology with medium-sized supported Ni nanoparticles. The latter catalyst (Ni/CP_NH3) displays a high surface area, high population of moderately strong basic sites, high oxygen vacancy population, and favorable Ni dispersion. These properties lead to a higher catalytic activity for CO2 methanation (75% CO2 conversion and 99% CH4 selectivity at 350 °C) compared to the catalysts with structured nanorod and nanocube support morphologies, which are found to contain a significant amount of leftover Na from the synthesis procedure that can act as a catalyst inhibitor. In addition, the best-performing Ni/CP_NH3 catalyst is shown to be highly stable, with minimal deactivation during time-on-stream operation., NDC and MAG acknowledge support of this work by the project “Development of new innovative low carbon energy technologies to improve excellence in the Region of Western Macedonia” (MIS 5047197), which is implemented under the Action “Reinforcement of the Research and Innovation Infrastructure” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). AIT thanks the Hellenic Foundation for Research and Innovation (HFRI) for supporting this research work under the 3rd Call for HFRI PhD Fellowships (Fellowship Number: 6033). KP acknowledges financial support from Khalifa University through the grant RC2–2018-024. V.S. acknowledges funding from project PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011, financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) ‘Una manera de hacer Europa’, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave and polymer-assisted synthesis of ultrasmall polydopamine nanoparticles: Applications as support for peroxidase-like activity and as intracellular iron delivery platform

  • Bonet-Aleta, Javier
  • Molina-Martínez, Ana P.
  • Chico-Carrasco, Estefania
  • Irusta, Silvia
  • Gonzalez, Alba
  • Encinas-Giménez, Miguel
  • Marquina, Clara
  • Hueso, José L.
  • Santamaría, Jesús
  • Sebastián, Víctor
Tuning the size of nanomaterials is a critical factor to consider when designing and optimizing their applications. In this context, polydopamine nanoparticles have demonstrated potential across a wide range of biomedical applications (Battaglini, M.; Emanet, M.; Carmignani, A.; Ciofani, G. Nano Today 2024, 55, 102151). However, achieving ultrasmall sizes remains a significant challenge, as most reported diameters in the literature exceed 50 nm. In this study, we present a method for synthesizing ultrasmall polydopamine nanoparticles (sPDA) with diameters below 5 nm. This is accomplished by employing a capping agent, polyvinylpyrrolidone, in combination with ultrafast microwave-assisted heating under basic pH conditions. Furthermore, we investigate the affinity of the synthesized sPDA nanostructures for various metal ions and observe excellent binding to iron ions. This property opens new avenues for catalytic applications and intracellular iron delivery, surpassing the performance of conventional polydopamine nanoparticles., J.B.-A. acknowledges the Spanish Government for an FPU fellowship and the Herchel–Smith Fund for postdoctoral financial support. VS acknowledges support from the Spanish Ministry of Science and Innovation (grant PID2021-127847OB-I00), as well as the NextGenerationEU/PRTR project (PDC2022-133866-I00), CIBER-BBN, ELECMI, and NANBIOSIS ICTSs. The TEM measurements were conducted at the Laboratorio de Microscopias Avanzadas, ICTS ELECMI, Spain. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials and Nanomedicine (CIBER-BBN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomimetic Apatite Nanoparticles and Microcrystalline Tyrosine as Biocompatible Vaccine Adjuvants: Performance in a Bluetongue Virus Sheep Model

  • Pérez, Estela
  • Sebastián, Víctor
  • Rodríguez-Largo, Ana
  • Miguel, Ricardo de
  • Gómez, Álex
  • Kramer, Matthias F.
  • Graessel, Anke
  • Parra Torrejón, Belén
  • Delgado López, José Manuel
  • Utrilla-Trigo, S.
  • Jiménez-Cabello, L.
  • Ortego, Javier
  • Blas, Ignacio de
  • Reina, Ramsés
  • Perez, Marta
  • Luján, Lluís
Aluminum oxyhydroxide (AlOOH) is the most widely used vaccine adjuvant, but its known adverse effects prompt the finding of other, safer alternative adjuvants. This study compares in sheep the global performance and safety of vaccine prototypes against bluetongue virus (BTV) formulated with AlOOH, biomimetic apatite nanoparticles (ApNPs), and microcrystalline tyrosine (MCT). Five groups of 6 sheep were included in the study: control, BTV serotype 4 alone, and BTV-4 combined either with AlOOH, ApNPs, or MCT. Adjuvants were fully characterized. Group specific antibodies against BTV-4 were observed in all treatment groups, including BTV-4 alone. After booster inoculation, ApNPs or MCT groups responded immediately, and it was delayed for BTV-4 and AlOOH groups. Comparable neutralizing antibody responses were observed in all treatment groups but were earlier for BTV-4, ApNPs, and MCT groups when compared with the AlOOH group. No significant systemic alterations were observed during the study. The AlOOH group developed more pronounced local reactions that persisted throughout the 133-day study and were evident as post-mortem granulomas. ApNPs and MCT are biocompatible, safer, and viable alternative adjuvants for sheep vaccines. BTV alone might also be suitable for this purpose. This work is the first demonstrating the suitability of biocompatible alternative adjuvants in sheep vaccines., This work was funded by the Ministry of Science, Innovation and Universities grants ref: RTI2018–096172–B-C33 and PID2021–127847OB-I00. The Institute of Nanoscience and Materials of Aragon (INMA) acknowledges support from the Severo Ochoa Programme for Centers of Excellence in R&D “Ayuda CEX2023-001286-S” funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001286-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-step and one-step approach for the in situ synthesis of palladium nanosheets on zein nanoparticle surface using membrane nanoprecipitation

  • Condello, Antonio
  • Piacentini, Emma
  • Sebastián, Víctor
  • Giorno, Lidietta
The data that supports the findings of this study are available from the corresponding author upon reasonable request., Metal nanostructures with Surface Plasmon Resonance (SPR) properties have garnered interest in applications like optical sensing, photothermal therapy, and optical waveguiding. While synthetic polymers commonly serve as carriers, integrating metal nanostructures with natural-based polymers enhances biocompatibility and biodegradability. With its amine and hydroxyl groups, zein is an ideal material for metal ion interaction enabling efficient surface functionalization of zein nanoparticles (ZNPs). Here, it is demonstrated that zein not only could act as an ideal biopolymeric carrier but also provide an optimal platform for synthesizing anisotropic structures such as palladium nanosheets (PdNS). Two approaches were explored: (i) a two-step approach, involving the preparation of ZNPs via membrane nanoprecipitation (MN) followed by in situ PdNS synthesis using K₂PdCl₄ in a gas-phase carbon monoxide (CO)-confined growth method; and (ii) one-step approach, employing the Pd precursor as the non-solvent during ZNPs nanoprecipitation. For ZNPs-Pd synthesized by the two-step method the influence of variables such as pH, salt, surfactant, and ethanol were evaluated. For one-step approach, to address scalability limitations, ZNPs-Pd nanoprecipitation was performed in a continuous MN process using a 0.2 µm SPG membrane, without using stabilizing agents. TEM imaging confirmed successful, selective PdNS formation on ZNP surfaces without compromising structural integrity. ICP-MS analysis validated the high yield. The ZNPs-Pd demonstrated photothermal activity in the NIR region, achieving temperatures up to 49.6°C. Despite thermal stress, ZNPs-Pd maintained structural stability, marking a significant advancement in the scalable fabrication of biocompatible, photothermally active nanostructures for biomedical and optical applications., A. Condello gratefully acknowledges the National Research Council of Italy (CNR) and Bracco Imaging S.p.A. for financing his Industrial Doctorate fellowship within the Doctorate STFCM, University of Calabria. V. Sebastian acknowledges the financial support by the Spanish Ministry of Science and Innovation (grant number PID2021-127847OB-I00). We also acknowledge the financial support of the NextGenerationEU/PRTR thanks to the project: PDC2022-133866-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008 -2011, Iniciativa Ingenio 2010, Consolider Program. Authors thank the"Advanced Microscopy Laboratory"ELECMI and NANBIOSIS ICTSs, for access to their instruments. The authors also acknowledge the Bio4Mem project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An à la carte synthesis approach for chemically linking Au, Pt, and Pd nanoparticles to few-layer 2H-MoS2

  • Quirós‐Ovies, Ramiro
  • Bonet-Aleta, Javier
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
The data that support the findings of this study are available on request from the corresponding author. The data are not publicly available due to privacy or ethical restrictions., The combination of 2D materials and metallic nanoparticles (NPs) enables the creation of hybrid systems with enhanced properties, such as improved light absorption via plasmon resonance or the introduction of active catalytic sites. However, effectively interfacing 2D materials with NPs remains challenging. This work presents a novel and efficient à la carte synthesis approach that enables the tailored chemical linkage of noble metal NPs—gold (Au), platinum (Pt), and palladium (Pd)— to ultrathin 2H-MoS2 sheets using orthogonal maleimide-based linkers. Specifically, alkyne-, carboxylic acid-, and phenyl bromide-terminated maleimides are employed to anchor Au, Pt, and Pd NPs, respectively. This modular strategy allows precise control over the surface chemistry, leading to uniform decoration with sub-2 nm NPs and robust attachment to the MoS2 substrate. This chemical linkage is expected to enhance the interaction between the MoS2 and the NPs while also improving the mechanical stability of the hybrid material. These combined effects make the system particularly promising for applications requiring both strong interfacial coupling and durability, such as electrocatalysis, sensing, and flexible electronic devices., V.S. acknowledge funding from project PID2024-160339OB-I00, PID2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (CEX2020-001039-S). INMA, CSIC-Universidad de Zaragoza, researchers acknowledge sup-port from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033). Authors acknowledge Sergio Aina the XPS analysis. Authors also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) ‘Una manera de hacer Europa’, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can five chemically different lamellar crystals self-assemble in a single spherulite?

  • Matxinandiarena, Eider
  • Pérez-Camargo, Ricardo A.
  • Sebastián, Víctor
  • Zhang, Pengfei
  • Ladelta, Viko
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Semicrystalline polymers with multiple crystallizable blocks provide opportunities to develop materials with hierarchical structures and customized properties, but they also pose unique challenges for understanding their crystallization. In this work, we investigate the crystallization from a miscible melt of a pentablock quintopolymer composed of five potentially crystallizable and biocompatible blocks, composed of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), poly(L-lactide) (PLLA), and polyglycolide (PGA), with a composition optimized to allow the crystallization of all blocks. Using Differential Scanning Calorimetry, synchrotron Fourier Transform Infrared Spectroscopy, synchrotron in situ Wide-angle and Small-angle X-Ray Scattering, Transmission Electron Microscopy, and Polarized Light Optical Microscopy, we demonstrate that upon cooling from the melt, all covalently linked blocks crystallize in a well-defined sequence: PGA > PLLA > PE > PCL > PEO. During crystallization, well-developed pentacrystalline positive spherulites are produced. This unprecedented level of self-assembly reveals the potential of complex block polymers to design multifunctional crystalline materials., The support from King Abdullah University of Science and Technology (KAUST) under grant BAS/1/1342-01-01 is gratefully acknowledged and highly appreciated. This work has received funding from: the Department of Education of the Basque Government through grant no. IT1503-22, the NEFA074/01 - AcroBioPLAST project, which has been 65% co-financed by the European Union through the Interreg VI-A Spain-France-Andorra Programme (POCTEFA 2021-2027), the project PID2023-149734NB-C22 funded by MCIU/AEI/10.13039/501100011033, and the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. R.A.P.-C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). The authors performed the Synchrotron radiation WAXS/SAXS experiments at BL11-NCD-SWEET and FTIR at BL-01-MIRAS beamline at the ALBA Synchrotron (Proposal Numbers 2020024169 and 2024028137, respectively). We also acknowledge the collaboration of the ALBA Synchrotron radiation facilities staff, particularly Juan Carlos Martínez Guil. V.S. acknowledges Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033, PID2021-127847OB-I00, ELECMI and NANBIOSIS ICTSs., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A rationally designed polypeptide-based hybrid platform for targeted intranasal brain drug delivery

  • Conejos-Sánchez, Inmaculada
  • Sebastián, Víctor
  • Vicent, María J.
I. Conejos-Sánchez et al., Data will be made available on request., Intranasal administration represents a safe and non-invasive route for drug delivery to the brain; however, clinical translation remains limited due to anatomical and physiological barriers. We present a modular hybrid biomaterial platform (NanoInBrain) that bypasses the blood-brain barrier via the olfactory route and enables central nervous system (CNS) drug delivery. The platform integrates a rationally designed polypeptide-based nanocarrier with a depot-forming hydrogel vehicle - a hyaluronic acid-poly-L-glutamate crosspolymer (HA-CP, Yalic®) - adapted from dermatological applications to enhance nasal mucosal retention and brain uptake. We engineered the nanocarrier system using star-shaped poly-L-glutamate (StPGA) architectures and systematically tuned physicochemical properties to optimize mucosal interaction and CNS diffusion. We introduced mucoadhesive and mucodiffusive functionalities via C-terminal odorranalectin (OL) conjugation, which improved nasal epithelium permeation through receptor-mediated mechanisms. Redox-responsive disulfide crosslinking (StPGA-CL-SS) further enhanced mucosal transport by enabling thiol-mediated anchoring to mucin glycoproteins, outperforming inert click-crosslinked variants. Ex vivo Franz diffusion studies and a nasal-mucosa-on-chip model demonstrated robust permeation, with in vivo imaging confirming brain distribution and intracellular uptake in neurons and microglia. Incorporation of HA-CP prolonged nasal residence (∼4 h) and increased total brain accumulation while being well-tolerated. This new platform combines architectural tunability, bioresponsive surface chemistry, and depot-mediated delivery in a scalable, biocompatible nose-to-brain delivery system with potential for treating neurological disorders., This work was supported by the European Research Council (grant ERC-CoG-2014-648831 ″MyNano” and ERC-PoC- 2022-POC1 ″POLYBRAINT”) to M.J.V.); Health Foundation La Caixa Research Project NanoGBA (HR22-00602) and Caixa Impulse NanoERT (CI24-20222); the Spanish Ministry of Science, Innovation, and Universities (SAF2016-80427-R, PID2019-108806RB-I00 to M.J.V.; RTC-2017-6465-1, C.F-L Grant PTQ2018-010251 and D.M − B, Grant Industrial PhD DI-14-06926); the MINECO/FEDER, UE; European Regional Development Fund (ERDF) included in the ERDF operational program of Comunidad Valenciana 2014-2020; the Valencian Council for Education, Culture, University and Employment (CIPROM/2023/053) to J.M.G-V and V.H-P; the Valencian Innovation Agency (AVI) (L.T-C INNTAL31/19/005) and the Generalitat Valenciana (I.D-P, Grant VALi+d ACIF-2016-021 and BEFPI/2018/055). I.C-S. is funded by AEEC Junior Grant (Ref INVES211323CONE), and L.I.T.-S. has a predoctoral contract by the Valencian Council for Education, Universities and Employment (ACIF2021/420). VS acknowledges funding from project PID2024-160339OB-I00, PID2021-127847OB-I00, ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalized carbon nanoparticles for smartphone-based sensing of formaldehyde

  • Cavallaro, Alessia
  • Sebastián, Víctor
  • Trusso Sfrazzetto, Giuseppe
This article is part of the themed collection: Carbon nanoarchitectonics for advanced applications in energy, environment and bio., et al., Formaldehyde (FA) is a volatile organic compound of significant environmental and health concern due to its toxicity and widespread presence in indoor and industrial settings. The development of sensitive, selective, and user-friendly detection systems for FA is therefore of critical importance. In this work, we report a novel fluorescent nanosensor based on carbon nanoparticles functionalized with dopamine for the detection of FA in both aqueous and gaseous phases. The system achieved remarkable limits of detection—87 ppb in water and 10 ppb in air—well below the safety thresholds recommended by the World Health Organization. The sensing performance arises not only from the intrinsic photophysical properties of the carbon core but also from its architecture, which allows the anchoring of multiple recognition sites on a single nanoparticle. This multivalent interaction strategy increases the likelihood of FA binding events, enhancing both sensitivity and selectivity. Computational analysis supports the central role of the nanoparticle in the recognition process. The sensor operates effectively in solution and the solid state, and its compatibility with smartphone-based detection paves the way for the development of portable, low-cost devices for real-time FA monitoring., G. T. S., G. L. D., and N. T. thank the ERMES project, funded under European Union's Horizon Europe EIC Pathfinder Open programme, grant agreement no. 101185661. V. S. acknowledges funding from project PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 and Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. These analyses were performed in LMA-ELECMI and Nanbiosis ICTSs. M. P. thanks Dr Corrado Bacchiocchi at the University of Camerino for the technical support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesizing porous nanospheres with highly efficient drug loading and sustained release through a thermal-controlled continuous stirred-tank reactor cascade

  • Chen, Huiyu
  • Udepurkar, Aniket Pradip
  • Clasen, Christian
  • Sebastián, Víctor
  • Kuhn, Simon
Nanospheres hold great promise for drug delivery but face challenges in achieving both high drug loading and sustained release. Here, we present a novel approach to produce porous cyclosporin A-loaded poly(lactic-co-glycolic acid) (PLGA) nanospheres via a thermal-controlled continuous stirred-tank reactor (CSTR) cascade, featuring rapid solidification of nanoemulsion droplets. This process traps more drug molecules in the nanosphere core by limiting their diffusion towards the surface and surrounding medium, resulting in a core-loaded structure. The resulting PLGA nanospheres exhibit a high cyclosporin A loading capacity and enable sustained drug release through the hydrolytic degradation of the PLGA matrix. Moreover, the total synthesis time is reduced from several hours to 40 min. The CSTR assisted manufacturing approach offers an efficient route for engineering nanospheres with high drug payloads and improved release kinetics, with broad potential for nanomedicine manufacturing., Financial support from the Research Foundation FLANDERS (G0B5921N and G088922N) is acknowledged. V. S. C. acknowledges support from the Spanish Ministry of Science and Innovation (grant PID2021-127847OB-I00), the NextGenerationEU/PRTR project (PDC2022-133866-I00), CIBER-BBN, ELECMI and NANBIOSIS ICTSs. H. C. acknowledges FWO Flanders for a strategic basic PhD fellowship (1S06425N)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking the potential of bacterial membrane vesicles: Advances in isolation techniques and biomedical applications

  • Canalejo-Marco, Gonzalo
  • Arruebo, Manuel
  • Sebastián, Víctor
Bacterial membrane vesicles (MVs) are nanosized, lipid bilayer-enclosed structures released by both Gram-positive (commonly referred as MVS, bacterial membrane vesicles) and Gram-negative bacteria (commonly referred as OMVs, outer membrane vesicles and outer-inner membrane vesicles (OIMVs)). They carry proteins, lipids, nucleic acids, and metabolites, playing key roles in intercellular communication, host–pathogen interactions, and immune modulation. Owing to these properties, MVs are attracting growing interest as versatile tools for vaccine development, drug delivery, and diagnostic applications. However, their translation remains constrained by low production yields, potential toxicity, and the lack of standardized isolation and characterization methods. This review summarizes current knowledge on MV composition and biogenesis, with a particular focus on emerging strategies for their isolation and engineering, and highlights their biomedical potential while outlining the challenges that must be overcome to enable future clinical applications., Authors acknowledge the funding from “Beca Leonardo a Investigadores y Creadores culturales 2021 de la Fundación BBVA” and from the Spanish Ministry of Science and Innovation and Universities (grant numbers PID2021–127847OB-I00, PID2023–146091OB-I00 and PID2024–160339OB-I00). Researchers acknowledge support from the 'Severo Ochoa' Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023–001286-S MICIU/AEI /10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatile and sustainable nanocolloids of Au@tannic acid coordinated with Fe(III) ions for layers deposition on the plasmochemicaly activated Ti6Al7Nb alloy

  • Matlak, Teresa
  • Kyzioł, Karol
  • Kleszcz, Kamil
  • Jędrzejczyk, Roman J.
  • Sebastián, Víctor
  • Kyzioł, Agnieszka
Data will be made available on request., The rejection of implanted orthopaedic devices is often associated with the formation of bacterial biofilm on their surface, which results in a slow process of tissue regeneration surrounding the implant, as well as poor osteointegration. Proper functionalization of the surface of orthopaedic implants could help mitigate this problem. This study focused on the surface modification of the medical alloy Ti6Al7Nb through plasma-chemical treatment (PA RF CVD – Plasma Activated Radio Frequency Chemical Vapour Deposition) and post-deposition of bioactive coatings involving Au nanoparticles derived from the reductive action of tannic acid and complexed with Fe(III) ions. The plasma-chemical process using Ar-O2 mixture contributed to surface activation and increased the oxygen content in the outer layer. Whereas, the introduction of additional top biopolymeric coating (chitosan, hyaluronic acid) positively influenced the biocompatibility of the resulting coatings. The resulting coatings are chemically stable with no signs of delamination. Moreover, in vitro studies revealed biocompatibility (Saos-2 cell line) with prospective bacteriostatic activity at the doses tested (Escherichia coli, Bacillus paramycoides). The development of novel inorganic-organic hybrid coatings with antioxidant activity, antibacterial properties, and biocompatibility indicates good prospects for the use of these coatings in implantology., This work was supported by the National Science Center within project OPUS 22 (2021/43/B/ST4/02833). The authors thank to Olga Barczyk-Woźnicka (Institute of Zoology and Biomedical Research, Faculty of Biology, Jagiellonian University) for the transmission electron microscopy characterisation of Au nanocolloids and to Urszula Komarnicka from the University of Wrocław for enabling ICP-OES analysis. We also acknowledge Wojciech Przybylski for valuable discussions on possible mechanistic scenarios considered in this study. The SEM-EDS investigations were supported by the program Excellence Initiative - Research University for the AGH University of Science and Technology, grant ID 1449. Victor Sebastian acknowledges 2021–127847OB-I00 MCIN/AEI/10.13039/501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next Generation EU/PRTR), the Severo Ochoa Programme for Centres of Excellence in R&D "Ayuda CEX2023-001286-S financiada por MICIU/AEI/10.13039/501100011033″. Victor Sebastian also gratefully acknowledges CIBER-BBN, LMA-ELECMI and NANBIOSIS ICTs., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically-linked heterostructures of palladium nanosheets and 2H-MoS2

  • Quirós‐Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gómez, Andrés
  • Arenal, Raúl
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
Special Section: EMRS 2024 ‐ Chemical Functionalization of 2D Materials., The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well-defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H-MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently-linked Pd nanosheet (PdNS)/functionalized MoS2 (f-MoS2) heterostructure is introduced, leveraging PdNS infrared-absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f-MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f-MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed-dimensional heterostructures., V.S. acknowledged funding from Project Nos. PID2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR). Authors would like to acknowledge Prof. Enrique Canovas for a fruitful discussion. Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.V.-M. acknowledges grants No. TED2021-131906A-100 and No. RYC2022-035200-I funded by Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.B. acknowledged Marie Skłodowska-Curie Actions programme MSCA-IF-2020-101030872. J.C.-G. acknowledged the MICINN-FEDER (No. PID2021-128313OB-I00), and support from the Regional Government of Madrid (NMAT2D-CM). J.C.G. also acknowledged a Research Consolidation Grant (No. CNS2022-36191 and PDC202-314587-1I00) from the Spanish Ministry of Science and Innovation. A.C.G. acknowledged funding from the Spanish Ministry of Science, Innovation and Universities (Grant Nos. TED2021-132267B-I00, PID2020-115566RB-I00, and PDC2023-145920-I00) and the EU FLAG-ERA project To2Dox (No. JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM project (No. Y2020/NMT-6661). IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (No. CEX2020-001039-S). INMA, CSIC-Universidad, researchers acknowledge support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (No. MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033). Authors also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa,” with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. R.A. and S.H. acknowledged funding from European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 889546, from the Gobierno de Aragón (DGA) under Project E13-23R, by the Spanish MICIU (No. PID2019-104739GB-100/AEI/10.13039/501100011033 and PID202-3151080N-BI00/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (No. PRTR-C17.I1) promoted by the Government of Aragon. The SEM and (S)TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional hybrid chitosan coatings with Cu nanoparticles on the shape memory NiTi enabling bactericidal activity

  • Jabłoński, Piotr
  • Kyzioł, Agnieszka
  • Krawiec, Halina
  • Sebastián, Víctor
  • Kyzioł, Karol
In this study, we introduce a hybrid approach for fabricating multifunctional coatings composed of chitosan and copper nanoparticles (CuNPs) on NiTi substrates. The fabrication process combines the immersion technique for chitosan layer deposition with inert gas condensation (IGC) based on magnetron sputtering for the generation of CuNPs. This method enables precise control over nanoparticle size and concentration, allowing for their uniform incorporation into a biopolymer matrix. The resulting CS/CuNPs/CS multilayers exhibit excellent surface coverage, nanoscale roughness (Ra of 30–65 nm), and moderately hydrophilic character (contact angle of 30°–35°), which collectively support cell adhesion and proliferation. Surface characterization confirmed the stability and durability of the coatings, which can be attributed to prior substrate activation using Piranha solution and plasma treatment. Electrochemical tests demonstrated enhanced corrosion resistance of the CS/CuNPs/CS layers, with a reduced current density (4.10 × 10−4 mA/cm2) and good temporal stability. In vitro studies using the MG-63 osteoblast-like cell line indicated non-cytotoxicity response of the coatings, confirming their plausible applicability in tissue engineering. Antibacterial assays revealed effective inhibition of Staphylococcus aureus growth and complete elimination of Escherichia coli, highlighting the strong bactericidal potential of the developed system. Moreover, Cu ion release within the surface layer profiles obtained in Ringer's solution over a 7-day period showed a predominantly linear release of copper ions, indicating a controlled and sustained antimicrobial effect. The ability to modulate chitosan layer thickness and nanoparticle loading during sequential deposition steps enables the customization of the coating properties to meet specific therapeutic requirements while minimizing nanoparticle usage. This strategy offers a promising platform for developing safe, effective, and tunable antibacterial coatings for biomedical implants., This work was financially supported by the National Science Center within project Preludium 20 (2021/41/N/ST8/02138), as well as by the program “Excellence initiative—research university” for the AGH University of Krakow. The study was carried out using research infrastructure funded by the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20, “ATOMIN 2.0—Center for materials research on ATOMic scale for the INnovative economy”. Piotr Jabłoński acknowledges also financial support for academic mobility provided by the Polish National Agency for Academic Exchange NAWA under the Programme STER—Internationalization of doctoral schools, Project no. PPI/STE/2020/1/00020. Agnieszka Kyzioł acknowledges the National Science Center (Poland) within project OPUS 22 (2021/43/B/ST4/02833). Victor Sebastian acknowledges funding from project PID2021-127847OB-I00 CIN/AEI/10.13039/501100011033, Severo Ochoa Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023-001286-S MICIU/AEI/10.13039/501100011033), LMA-ELECMI and NANBIOSIS ICTs. This work was supported by Narodowe Centrum Nauki (2021/41/N/ST8/02138, 2021/43/B/ST4/02833)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchically porous carbons from almond residues via hydrothermal pretreatment and mild K2CO3 activation for aqueous zinc hybrid supercapacitors

  • Shaj, Densa A.
  • Alvira, Darío
  • Antorán, Daniel
  • Sebastián, Víctor
  • Manyà, Joan J.
Agricultural residues offer a scalable feedstock for sustainable carbon electrodes, yet achieving high electrochemical performance in aqueous zinc-ion hybrid supercapacitors (ZHSCs) often relies on harsh activating agents and low carbon yields. Here, almond-tree pruning residues (AT) and almond shells (AS) are converted into porous carbons via hydrothermal pretreatment (HTC) followed by mild K2CO3 activation, enabling hierarchical porosity while limiting excessive burnoff. The HTC-assisted route markedly enhances N2-accessible surface area and mesopore volume, improving electrolyte accessibility and ion-transport pathways, while the presence of oxygen-containing groups contributes to favorable interfacial interactions in aqueous media. AT-derived carbons consistently outperform AS counterparts, highlighting the strong influence of precursor architecture on activation efficiency and pore connectivity. In a two-electrode aqueous ZHSC configuration (Zn metal anode; porous carbon cathode), the best performing AT-derived electrode delivered a specific capacity of 142 mAh g-1 at 0.1 A g-1 with 91% capacity retention after 10,000 cycles at 10 A g-1. Electrolyte chemistry plays a key role in durability: zinc trifluoromethanesulfonate (ZTFS) provides higher capacity retention and improved reversibility than ZnSO4, consistent with a more uniform Zn deposition and the formation of a less crystalline, fluorine-containing interphase, as evidenced by post-mortem analyses. Electrochemical impedance spectroscopy and galvanostatic intermittent titration techniques further support faster interfacial kinetics and more favorable transport in the best-performing carbon, in line with its balanced hierarchical porosity and surface chemistry. The device achieves an energy density of 87.8 Wh kg-1 at 62.3 W kg-1 and retains 37.9 Wh kg-1 at 13.6 kW kg-1, matching or surpassing many biomass-derived ZHSC cathodes prepared using more corrosive chemicals. Overall, this work demonstrates a greener, yield-efficient pathway to high-performance carbon cathodes for aqueous zinc-based hybrid energy storage., This work is part of the eNargiZinc project, funded by the European Union’s Horizon Europe programme (Marie Skłodowska-Curie actions) under the Grant Agreement No. 101120311. The authors also acknowledge funding from the Aragon Government (T22_23R). V. S. acknowledges support from the Spanish Ministry of Science and Innovation (grant PID2021-127847OB-I00 and PID2024-160339OB-I00), CIBER-BBN, ELECMI, and NANBIOSIS ICTS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved drug delivery across the blood-brain barrier through post-insertion functionalization of lipid nanocapsules with cannabidiol using click chemistry

  • Pérez-López, Alexandre
  • Aparicio-Blanco, Juan
  • Martín-Sabroso, Cristina
  • Martins, Cláudia
  • Gómez-Lázaro, Laura
  • Sebastián, Víctor
  • González-Matilla, Juan Francisco
  • Sarmento, Bruno
  • Torres-Suárez, Ana I.
Crossing the blood-brain barrier (BBB) remains a major challenge in drug delivery for central nervous system (CNS) diseases. This study presents a covalent functionalization strategy to attach cannabidiol (CBD), the major non-psychotropic phytocannabinoid, to lipid nanocapsules (LNCs) to enhance their BBB permeability in vitro and in vivo. Using click chemistry, two highly monodisperse CBD-functionalized LNC formulations are prepared, LNC1CBD and LNC2CBD, with sizes of 27.0 ± 0.8 nm and 55.0 ± 2.5 nm, and functionalization efficiencies of 30.82 ± 5.93% and 29.59 ± 8.34%, respectively. LNC2CBD exhibits a 55.77% increase in cellular uptake relative to non-functionalized LNCs. In vitro permeability assays demonstrate that LNC1CBD significantly enhances translocation across the healthy BBB at earlier timepoints (4, 8 and 12 h), whereas LNC2CBD exhibits enhanced permeability at later stages (12 and 24 h) compared to their non-functionalized counterparts. This trend is maintained in a diseased BBB model, where CBD functionalization significantly improves permeability at nearly all timepoints for both formulations. Biodistribution studies in healthy mice validate these findings. LNC1CBD significantly increases brain accumulation by 14.87% at 30 min, while LNC2CBD maintains this effect, reaching 17.64% at 30 min, 38.23% at 90 min and 73.53% at 240 min, relative to non-functionalized LNCs. These findings underscore the potential of LNCs covalently functionalized with CBD as a promising platform for CNS-targeted delivery, which can ultimately open new avenues for therapeutic agents that do not usually reach the brain parenchyma at effective concentrations., This work was supported by the Spanish Ministry of Science, Innovation and Universities through the research project PID2019–105531RB-I00/AEI/10.13039/501100011033, titled “Lipid nanocarriers functionalized with cannabidiol for the treatment of brain tumours (NANOGLIO)”. Furthermore, A.P.L acknowledges the Community of Madrid for his contract (Ref. PIPF-2022/SAL-GL-25048) and the Complutense University of Madrid for funding a research stay at i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal under the Erasmus Plus program. L.G.L acknowledges the Complutense University of Madrid and Santander Bank for financial support (CT82/20-CT83/20). This work was supported by MOBILIsE Project, which has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 951723. This work was also supported by FCT—Fundação para a Ciência e a Tecnologia in the framework of the project COMPETE2030-FEDER-00683900. C. M. acknowledges CEEC contract (2023.07049.CEECIND). V. S. acknowledges support from the Spanish Ministry of Science and Innovation (grant PID2021–127847OB-I00), as well as the CIBER-BBN, ELECMI and NANBIOSIS ICTSs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrophage-mediated in vivo intracellular crystallization of aluminum oxyhydroxide adjuvant in vaccine-induced granulomas

  • Pérez, Estela
  • Navarro, Marta
  • Ibarra, Alfonso
  • Blas, Ignacio de
  • Perez, Marta
  • Luján, Lluís
  • Sebastián, Víctor
Aluminum (Al) in the form of γ-aluminum oxyhydroxide (γ-AlOOH) nanoparticles has been used as a vaccine adjuvant for nearly a century. At injection sites, animals and humans develop granulomatous inflammation, in which macrophages may contain intracellular crystalline-like structures, so-called crystalloid bodies (CBs), morphologically distinct from the injected adjuvant. This raised the hypothesis that CBs may originate from the in vivo crystallization of γ-AlOOH within macrophages. To test this, six sheep received two subcutaneous doses of a γ-AlOOH-adjuvanted viral vaccine, while six controls received the same antigen without an adjuvant. All injection sites (AlOOH: n = 12; controls: n = 12) were examined by hematoxylin and eosin, modified aluminum hematoxylin, and lumogallion fluorescence. Al and CBs occurred exclusively in AlOOH-vaccinated tissues. The adjuvant stock and vaccine formulations were characterized ex situ using a combination of structural and imaging techniques. Four granulomas containing CBs, collected 133 days postinjection, were further examined using in situ imaging and crystallographic approaches. No crystalline structures resembling CBs were identified in the injected products; only γ-AlOOH nanoparticles were present. In post-mortem granulomas, macrophages contained Al-positive vacuoles filled with nanoparticle aggregates compatible with γ-AlOOH, often adjacent to CBs. Crystallographic analyses demonstrated that CBs were highly ordered γ-Al2O3 microcrystals, and advanced SEM-EDS with elemental mapping similarly distinguished γ-AlOOH nanoparticles and CBs as separate phases. These findings support an in vivo formation of γ-Al2O3 microcrystals from γ-AlOOH nanoparticles within macrophages under physiological conditions. To our knowledge, these findings provide evidence consistent with Al crystallization within mammalian cells and suggest that macrophage phagolysosomal conditions may represent a previously unrecognized biomimetic pathway for γ-Al2O3 formation. This finding may offer a biological model for the development of green and low-energy synthesis strategies for γ-Al2O3, with potential industrial applications as well as relevance to immunotoxicology, pathology, and cell biology in the context of vaccine adjuvants., This study was funded by the Ministry of Science, Innovation and Universities (grants RTI2018−096172−B-C33, PID2024−160339OB-I00, and PID2021−127847OB-I00). E.P. was supported by the Ministry of Science, Innovation and Universities (FPU19/00553). Additional support was provided by the Institute of Nanoscience and Materials of Aragon (INMA) through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023−001286-S), funded by MICIU/AEI (10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic-assisted coating of nanoparticles by membranes from extracellular vesicles

  • Alonso-Campos, Pablo
  • Balas, Francisco
  • Hueso, José L.
  • Sebastián, Víctor
  • Sancho‐Albero, María
  • Santamaría, Jesús
Extracellular vesicle (EV)-based nanotherapies represent a promising alternative in cancer nanomedicine thanks to their targeting properties. However, two major issues remain when combining nanoparticles (NPs) with EVs: (1) safety concerns of cancer-derived EVs related to their oncogenic nature and (2) lack of robust, reproducible, and efficient strategies for NPs coating with EVs membranes. To overcome these main challenges, in this study, we have combined a microfluidic platform to direct the reassembly of previously isolated EVs-derived membranes from lung cancer cells onto fluorescent silica NPs (FSNs). These FSNs leverage the versatile surface functionalization of silica NPs together with intrinsic fluorescent properties for precise intracellular tracking of our hybrids, avoiding membrane-labeling fluorescent probes. While preserving the tumor-targeting properties of natural lung cancer-derived EVs, the proposed microfluidic strategy offers superior handling and manipulation of the process to guarantee (1) homogeneous EV-like coating (6.3 nm thick), (2) high reproducibility, (3) efficient coating yields (87.8% of the NPs were coated), and (4) selective tumor-targeting properties (8.0- and 4.3-fold increases for parental A549 tumoral cells compared to HeLa and fibroblasts at 4 h, respectively). This technology enables the fabrication of biomimetic hybrid core–shell structures with high precision and stability in a continuous process that is more amenable to scaling up., The authors thank the Spanish Government, University, Innovation and Science Ministry (CONCERT project). PAC thanks the Spanish Government for a FPU PhD research fellowship. VS acknowledges funding from project PID2024160339OB-I00 and PID2021-127847OB-I00 MCIN/AEI/ 10.13039/501100011033. MS-A thanks the AECC for postdoctoral research fellowship funding (POSTD234966SANC), “Ayuda a Talento AECC 2023,” and for a Ramón y Cajal Fellowship (RYC2024-050017-I). The group thanks the Spanish National Research Council (CSIC) (Beca JAE Intro 2024). We thank “Centro de Excelencia Severo Ochoa” (CEX2023-001286 S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic reactors for the synthesis of inorganic and hybrid nanoparticles for drug delivery

  • Sebastián, Víctor
Inorganic nanoparticles (NPs) have played a central role in the development of nanomedicine, offering unique physicochemical properties that enable imaging, therapy, and multifunctional drug delivery. Despite extensive progress, the clinical translation of nanomedicines remains limited, largely due to challenges associated with reproducibility, scalability, toxicity, and, critically, inefficient delivery to target tissues. In this context, microfluidic technologies have emerged as a powerful platform to address many of these limitations by enabling continuous, highly controlled, and reproducible NP synthesis under well-defined flow conditions. This review provides a comprehensive overview of recent advances in the continuous-flow microfluidic synthesis of inorganic NPs for drug delivery applications. Key microfluidic parameters governing NP formation are discussed, including mixing regimes, residence time, flow configuration, and scale-up, and analyze how these factors influence size, dispersity, composition, and functional performance. Particular attention is devoted to plasmonic NPs, non-metallic magnetic NPs, and other relevant inorganic systems such as quantum dots and silica NPs, highlighting both achievements and remaining challenges in their microfluidic production. Beyond purely inorganic NPs, the review examines the growing field of hybrid organic–inorganic NPs, where inorganic cores are integrated with polymers, lipids, or biomimetic components to combine synthetic functionality with biological performance. These hybrid architectures represent a promising strategy to overcome key barriers in drug delivery, including immune clearance, poor targeting efficiency, and limited therapeutic index, while posing additional synthetic and integration challenges that microfluidics is uniquely positioned to address. Finally, current bottlenecks and future perspectives for microfluidic nanomanufacturing are discussed, including productivity, multistep process integration, in-line purification, and automation. Microfluidic platforms, especially when combined with hybrid and bioinspired NP design, are positioned as enabling technologies to bridge the gap between advanced NP engineering and clinically translatable nanomedicines., The author acknowledges funding from project PID2024-160339OB-I00, PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 and Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Translating hybrid CuS-indocyanine green-polymer nanoparticle production into flow: Multistage synthesis, purification, and photodynamic biocidal activity

  • Ruiz-Bozal, Pablo
  • Abengochea-Quílez, Lucia
  • Bescos, Isabel
  • Herrero, Pablo
  • Yus, Cristina
  • Arruebo, Manuel
  • Sebastián, Víctor
Data will be made available on request., Hybrid polymeric nanoparticles encapsulating indocyanine green (ICG) and decorated with copper sulfide (Cu₂–ₓS) were synthesized using semi-continuous micro- and millifluidic reactors (RS-PLGA-ICG@μCuS and RS-PLGA-ICG@mCuS, respectively). By leveraging both components as NIR-active photosensitizers, these nanoparticles were developed for enhanced antimicrobial photodynamic therapy. Continuous microfluidic processing enabled higher ICG loading than batch synthesis while maintaining tight control over particle size, ζ-potential, and copper content. Computational fluid dynamics modelling of the micromixer revealed the critical role of flow patterns and local shear stresses in achieving homogeneous nanoprecipitation. Continuous downstream processing was implemented using hollow-fiber tangential flow filtration, enabling solvent removal and nanoparticle conditioning under flow. A millifluidic reactor was further introduced as a scale-out strategy, increasing production throughput while preserving reproducibility of nanoparticle properties., Photodynamic performance was assessed using DHR 123 and SOSG probes, confirming efficient reactive oxygen species generation, predominantly via type I pathways, with 50 ppm ICG identified as the optimal concentration. Both micro- and millifluidic formulations showed reproducible activity. Bactericidal assays demonstrated significant efficacy against planktonic and biofilm-forming Staphylococcus aureus ATCC 25923, achieving higher log reductions than batch-produced nanoparticles due to improved photosensitizer encapsulation. Cytotoxicity studies with human dermal fibroblasts confirmed viability above ISO 10993-5 thresholds (>70%), with continuous-flow formulations exhibiting reduced copper-related toxicity., The semi-continuous strategy developed represents a scalable and intensified platform for manufacturing multifunctional antibacterial nanovectors with enhanced performance and biocompatibility., V.S acknowledges support from the Spanish Ministry of Science and Innovation (grant (PID2021-127847OB-I00, PDC2022-133866-I00 and PID2024-160339OB-I00), CIBER-BBN, ELECMI and NANBIOSIS ICTSs. Additional support was provided by the Institute of Nanoscience and Materials of Aragon (INMA) through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023-001286-S), funded by MICIU/AEI (10.13039/501100011033). This work was also financially supported by MICIN/AEI (PDI2021-1261132NB-100 and PID2023-146091OB-I00)., CEX2023-001286-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A smartphone-assisted approach to formaldehyde detection using diethanolamine-grafted carbon nanoparticles

  • Santonocito, Rossella
  • Russo, Lorenzo
  • Sebastián, Víctor
  • Ferlazzo, Angelo
  • Gulino, Antonino
  • Petroselli, Manuel
  • Ruffino, Roberta
  • Li Destri, Giovanni
  • Pappalardo, Andrea
  • Tuccitto, Nunzio
  • Cavallaro, Alessia
  • Trusso Sfrazzetto, Giuseppe
Formaldehyde (FA) is a well-known indoor pollutant and human carcinogen, making the development of field-deployable sensors for its monitoring crucial for public safety. Herein, we report a facile strategy to synthesize carbon nanoparticles functionalized with diethanolamine (CNPs-DEA) as FA sensors. The strategic surface functionalization dictates a specific spatial arrangement that is key to efficient and cooperative interaction with the analyte. In water solution, the probe exhibits a LOD of 46 ppb with a binding constant (log β) value of 4.31 ± 0.01. By immobilizing the CNPs on polyamide membranes, we engineered a solid-state strip test integrated with a 3D-printed smartphone readout platform. This setup delivers an ultralow detection threshold (1 ppb) for gaseous FA and, crucially, maintains robust performance under saturated humidity conditions, overcoming a major limitation of conventional carbon-based sensors. The practical utility of the device was validated by quantifying FA in commercial paint samples. Combining operational simplicity, low cost, and high sensitivity, this platform represents a robust early warning tool for air quality monitoring, bridging the gap between sophisticated laboratory instrumentation and accessible real-world applications., G.T.S., G.L.D., N.T. thank the ERMES project, funded under European Union’s Horizon Europe EIC Pathfinder Open programme, grant agreement No. 101185661. V.S. acknowledges funding from project PID2024-160339OB-I00, PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 and Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. These analyses were performed in LMA-ELECMI and Nanbiosis ICTSs. M.P. thanks Corrado Bacchiocchi at the University of Camerino for the technical support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Elucidating the mechanisms of action of antibiotic-like ionic gold and biogenic gold nanoparticles against bacteria

  • Paesa, Monica
  • Remirez de Ganuza, Cristina
  • Alejo, Teresa
  • Yus, Cristina
  • Irusta, Silvia
  • Arruebo, Manuel
  • Sebastian, Víctor
  • Mendoza, Gracia
The antimicrobial action of gold depends on different factors including its oxidation state in the intra- and extracellular medium, the redox potential, its ability to produce reactive oxygen species (ROS), the medium components, the properties of the targeted bacteria wall, its penetration in the bacterial cytosol, the cell membrane potential, and its interaction with intracellular components. We demonstrate that different gold species are able to induce bacterial wall damage as a result of their electrostatic interaction with the cell membrane, the promotion of ROS generation, and the consequent DNA damage. In-depth genomic and proteomic studies on Escherichia coli confirmed the superior toxicity of Au (III) vs Au (I) based on the different molecular mechanisms analyzed including oxidative stress, bacterial energetic metabolism, biosynthetic processes, and cell transport. At equivalent bactericidal doses of Au (III) and Au (I) eukaryotic cells were not as affected as bacteria did, maintaining unaffected cell viability, morphology, and focal adhesions; however, increased ROS generation and disruption in the mitochondrial membrane potential were also observed. Herein, we shed light on the antimicrobial mechanisms of ionic and biogenic gold nanoparticles against bacteria. Under selected conditions antibiotic-like ionic gold can exert a strong antimicrobial activity while being harmless to human cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microwave-driven exfoliation of bulk 2H-MoS[sub]2 after acetonitrile prewetting produces large-area ultrathin flakes with exceptionally high yield

  • Quirós-Ovies, R.
  • Laborda, M.
  • Martín Sabanés, N.
  • Martín-Pérez, L.
  • Moreno Da-Silva, S.
  • Burzurí, E.
  • Sebastian, V.
  • Pérez, E. M.
  • Santamaría, J.
2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS2 to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS2 layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm2), and excellent quality (no significant MoO3 detected).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rapid microwave heating and fast quenching for the highly efficient production of long-term stable supported Ag nanoclusters

  • Manno, R.
  • Ranjan, P.
  • Sebastian, V.
  • Mallada, R.
  • Irusta, S.
  • Van der Eycken, E.V.
  • Santamaria, J.
Given the exciting potential of metallic clusters in a variety of fields, the development of novel preparation methods to accurately controlling the cluster size has become a research priority. Specifically, for catalytic applications, the synthesis and deployment of metallic nanoclusters on a proper substrate is perhaps the main bottleneck. Here, we have adopted an alternative reactor that uses simultaneous ice cooling and microwave heating (unlike water ice is a low microwave absorber) for the synthesis of Ag nanoclusters directly over a support with ordered mesopores (SBA-15). The reactor design exploits the selectivity of microwave heating, assuring a rapid localized nucleation followed by a nearly instantaneous quenching that largely avoids the aggregation of nascent clusters as well as Ostwald ripening mechanisms. We have compared this new synthesis approach with some previously reported methods for the production of supported silver nanoclusters: conventional batch reactor and also a continuous flow microreactor. The resulting Ag clusters were initially analyzed in terms of size distribution, textural properties and catalytic activity in the reduction of 4-nitrophenol. Finally, encouraged by the good results obtained, these nanoclusters were also employed in the production of different cyclic organic compounds, building blocks for pharmaceutical and photochemical applications. The nanoclusters displayed a high catalytic activity, lowering the metal loading required to achieve high yield and selectivity. Furthermore, the stabilization of the clusters over the mesoporous substrate allowed their reuse in several reaction cycles. In fact, the method produced exceptionally stable Ag clusters, whose catalytic properties were preserved even after one year of storage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vine Shoots-Derived Hard Carbons as Anodes for Sodium-Ion Batteries: Role of Annealing Temperature in Regulating Their Structure and Morphology

  • Alvira, Darío
  • Antorán, Daniel
  • Vidal, Mariano
  • Sebastian, Victor
  • Manyà, Joan J.
Sodium‐ion batteries (SIBs) are considered one of the most promising large‐scale and low‐cost energy storage systems due to the abundance and low price of sodium. Herein, hard carbons from a sustainable biomass feedstock (vine shoots) were synthesized via a simple two‐step carbonization process at different highest temperatures to be used as anodes in SIBs. The hard carbon produced at 1200 °C delivered the highest reversible capacity (270 mAh g−1 at 0.03 A g−1, with an acceptable initial coulombic efficiency of 71 %) since a suitable balance between the pseudographitic domains growth and the retention of microporosity, defects, and functional groups was achieved. A prominent cycling stability with a capacity retention of 97 % over 315 cycles was also attained. Comprehensive characterization unraveled a three‐stage sodium storage mechanism based on adsorption, intercalation, and filling of pores. A remarkable specific capacity underestimation of up to 38 % was also found when a two‐electrode half‐cell configuration was employed to measure the rate performance. To avoid this systematic error caused by the counter/reference electrode polarization, we strongly recommend the use of a three‐electrode setup or a full‐cell configuration to correctly evaluate the anode response at moderate and high current rates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Colistin-loaded aerosolizable particles for the treatment of bacterial respiratory infections

  • Landa, Guillermo
  • Alejo, Teresa
  • Sauzet, Theo
  • Laroche, Julian
  • Sebastian, Victor
  • Tewes, Frederic
  • Arruebo, Manuel
Compared to parenteral administration of colistin, its direct pulmonary administration can maximize lung drug deposition while reducing systemic adverse side effects and derived nephrotoxicity. Current pulmonary administration of colistin is carried out by the aerosolization of a prodrug, colistin methanesulfonate (CMS), which must be hydrolized to colistin in the lung to produce its bactericidal effect. However, this conversion is slow relative to the rate of absorption of CMS, and thus only 1.4 % (w/w) of the CMS dose is converted to colistin in the lungs of patients receiving inhaled CMS. We synthesized several aerosolizable nanoparticle carriers loaded with colistin using different techniques and selected particles with sufficient drug loading and adequate aerodynamic behavior to efficiently deliver colistin to the entire lung. Specifically, we carried out (i) the encapsulation of colistin by single emulsion-solvent evaporation with immiscible solvents using polylactic-co-glycolic (PLGA) nanoparticles; (ii) its encapsulation using nanoprecipitation with miscible solvents using poly(lactide-co-glycolide)-block-poly(ethylene glycol) as encapsulating matrix; (iii) colistin nanoprecipitation using the antisolvent precipitation method and its subsequent encapsulation within PLGA nanoparticles; and (iv) colistin encapsulation within PLGA-based microparticles using electrospraying. Nanoprecipitation of pure colistin using antisolvent precipitation showed the highest drug loading (55.0 ± 4.8 wt%) and spontaneously formed aggregates with adequate aerodynamic diameter (between 3 and 5 μm) to potentially reach the entire lung. These nanoparticles were able to completely eradicate Pseudomonas aeruginosa in an in vitro lung biofilm model at 10 µg/mL (MBC). This formulation could be a promising alternative for the treatment of pulmonary infections improving lung deposition and, therefore, the efficacy of aerosolized antibiotics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Impact PLA in compatibilized PLA/PCL blends: Optimization of blend composition and Type and content of compatibilizer

  • Fernández-Tena, Ainhoa
  • Otaegi, Itziar
  • Irusta, Lourdes
  • Sebastián, Víctor
  • Guerrica-Echevarría, Gonzalo
  • Müller, Alejandro Jesús
  • Aranburu, Nora
In this work, the effectiveness of seven commercial compatibilizers is tested in polylactide (PLA)/poly(ε‐caprolactone) (PCL) blends with different compositions to obtain a high‐impact PLA. None of the compatibilizers is effective for 90/10 and 80/20 PLA/PCL compositions, as no improvement of the impact strength is observed. For the 70/30 composition, compatibilizers having glycidyl methacrylate (GMA) and acrylate groups in their structure are proved the most effective, as the morphological change towards co‐continuity induced by them leads to significant impact strength improvements (of ≈345% and 90% with respect to the neat PLA and the noncompatibilized PLA/PCL 70/30 blend, respectively). The 70/30 PLA/PCL composition, as it shows the best balance of properties, and the best compatibilizer (ElvaloyPTW) are chosen to carry out the optimization of the compatibilizer content. It is found that adding 6 phr to the blend results in highly toughened and ductile blends while maintaining a high modulus and yield strength values. Larger compatibilizer contents lead to even higher impact strength values, but the low‐strain mechanical properties are notably reduced. Thus, in this work, a simple and easily scalable method to produce high‐impact PLA is shown, as it implies the compounding of three commercially available components without involving any toxic solvents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced Efficiency of Pd(0)-Based Single Chain Polymeric Nanoparticles for <i>in Vitro</i> Prodrug Activation by Modulating the Polymer’s Microstructure

  • Deng, Linlin
  • Sathyan, Anjana
  • Adam, Catherine
  • Unciti-Broceta, Asier
  • Sebastian, Víctor
  • Palmans, Anja R. A.
Bioorthogonal catalysis employing transition metal catalysts is a promising strategy for the in situ synthesis of imaging and therapeutic agents in biological environments. The transition metal Pd has been widely used as a bioorthogonal catalyst, but bare Pd poses challenges in water solubility and catalyst stability in cellular environments. In this work, Pd(0) loaded amphiphilic polymeric nanoparticles are applied to shield Pd in the presence of living cells for the in situ generation of a fluorescent dye and anticancer drugs. Pd(0) loaded polymeric nanoparticles prepared by the reduction of the corresponding Pd(II)-polymeric nanoparticles are highly active in the deprotection of pro-rhodamine dye and anticancer prodrugs, giving significant fluorescence enhancement and toxigenic effects, respectively, in HepG2 cells. In addition, we show that the microstructure of the polymeric nanoparticles for scaffolding Pd plays a critical role in tuning the catalytic efficiency, with the use of the ligand triphenylphosphine as a key factor for improving the catalyst stability in biological environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sustainable production of nanoemulsions by membrane-assisted nanoemulsification using novel aroma-based hydrophobic deep eutectic solvents for enhanced antifungal activities

  • Mondal, S.
  • Syed, U.T.
  • Pinto, E.
  • Leonardo, I.C.
  • Romero, P.
  • Gaspar, F.B.
  • Crespo, M.T. Barreto
  • Sebastian, V.
  • Crespo, J.G.
  • Brazinha, C.
Hydrophobic deep eutectic solvents (DESs), a recent class of green solvents, offer 100% atom economy, low cost, potential biodegradability, negligible toxicity and promising bioactivities. In this work, novel aroma-based therapeutic hydrophobic DESs were prepared and dispersed in aqueous media as nanoemulsions to potentiate biomedical applications, where polar media is encountered. A reusable microengineered stainless-steel isoporous membrane was fabricated by laser drilling technique. Three hydrophobic DESs, namely DES A (menthol and vanillin), DES B (menthol and raspberry ketone), and DES C (thymol and raspberry ketone) were prepared and emulsified in aqueous media by sustainable membrane emulsification technique. The optimised nanoemulsion (DES C-in-water) exhibited a monomodal size distribution with Zavg (size average) of 147 nm and polydispersity index of 0.22. From the application perspective, the formulated DES-in-water nanoemulsions and their constituents were evaluated for their antibacterial properties against Escherichia coli and Staphylococcus aureus. Additionally, antifungal properties of the DES-based emulsions were reported for the first time by testing them against four fungal strains, Aspergillus fumigatus, Candida albicans, Candida krusei, and Trichophyton mentagrophytes. The nanoemulsions were found to be exhibit antimicrobial effect and lesser quantities of individual compounds were needed in nanoemulsified state to show similar effects. Different 1D and 2D NMR techniques were successfully used to investigate the structural orientation and the inter and intramolecular interactions in the DES and emulsion systems, which revealed a probable cause for higher antimicrobial activity of DES C-based emulsions compared to its peers. Lastly, a synergistic effect of the components in nanoemulsions led to enhanced antimicrobial activities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Performance of a helical insert in a commercial tubing as a passive micromixer to produce nanoparticles using an emulsification approach

  • Abengochea, Lucia
  • Pina-Artal, Santiago
  • González, Víctor
  • Sebastián, Víctor
Chemical reactions with very fast kinetics, such as nanomaterial production, depend on mixing conditions to control reactant conversion and product selectivity. Mixing at the molecular level (micromixing) is an important stage in the operation of chemical engineering and process technology, with a strong influence on the selectivity, yield, and quality of final products. Micromixers have demonstrated excellent mixing capabilities in many physical and chemical methods. In this study, a new type of passive micromixer based on a helical insert was microfabricated. Interestingly, the micromixer is easy to be assembled into conventional tubings widely used in microfluidics and has no moving parts. The proposed microsystem is robust, compact, and has a modular design that enables the proper combination of mixing units for the on-demand tuning of mixing requirements. Finally, the helical insert could be easily regenerated in the case of fouling. The mixing efficiency of the proposed insert was validated using an acetal cleavage method and was finally successfully tested in the production of single emulsions to form polymeric nanoparticles of high interest in biomedicine. The mixing efficiency of the proposed micromixers is as good as the ones currently used and also offers a plethora of advantages that are not feasible in current systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanomedicine targeting cuproplasia in cancer: labile copper sequestration using polydopamine particles blocks tumor growth in vivo through altering metabolism and redox homeostasis

  • Bonet-Aleta, Javier
  • Encinas-Giménez, Miguel
  • Oi, Miku
  • Pezacki, Aidan T.
  • Sebastián, Víctor
  • de Martino, Alba
  • Martín-Pardillos, Ana
  • Martín-Duque, Pilar
  • Hueso, José L.
  • Chang, Christopher J.
  • Santamaría, Jesús
Copper plays critical roles as a metal active site cofactor and metallo-allosteric signal for enzymes involved in cell proliferation and metabolism, making it an attractive target for cancer therapy. In this study, we investigated the efficacy of polydopamine nanoparticles (PDA NPs), classically applied for metal removal from water, as a therapeutic strategy for depleting intracellular labile copper pools in triple negative breast cancer models through the metal-chelating groups present on PDA surface. By using the activity-based sensing probe FCP-1, we could track the PDA-induced labile copper depletion while leaving total copper levels unchanged, and link it to the selective MDA-MB-231 cell death. Further mechanistic investigations revealed that PDA NPs increased reactive oxygen species (ROS) levels, potentially through the inactivation of superoxide dismutase 1 (SOD1), a copper-dependent antioxidant enzyme. Additionally, PDA NPs were found to interact with the mitochondrial membrane, resulting in an increase in mitochondrial membrane potential, which may contribute to enhanced ROS production. We employed an in vivo tumor model to validate the therapeutic efficacy of PDA NPs. Remarkably, in the absence of any additional treatment, the presence of PDA NPs alone led to a significant reduction in tumor volume by a factor of 1.66 after 22 days of tumor growth. Our findings highlight the potential of PDA NPs as a promising therapeutic approach for selectively targeting cancer by modulating copper levels and inducing oxidative stress, leading to tumor growth inhibition as shown in these triple negative breast cancer models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic synthesis of PLGA nanoparticles enabled by an ultrasonic microreactor

  • Udepurkar, Aniket Pradip
  • Mampaey, Laura
  • Clasen, Christian
  • Sebastián Cabeza, Víctor
  • Kuhn, Simon
We present an ultrasonic microreactor for synthesising poly(lactic-co-glycolic) acid (PLGA) nanoparticles through the emulsion-solvent evaporation technique. Monodispersed PLGA nanoparticles (polydispersity index (PDI) < 0.3) in the size range of 20-300 nm are desired for biomedical applications. An ultrasonic microreactor with rough microchannels is utilised for the synthesis of PLGA nanoparticles. Through a comprehensive parametric investigation, we identify the optimal ultrasonic power, PLGA concentration, and aqueous-to-organic phase flow rate ratio, to minimise the size of the PLGA nanoparticles. By varying the operational parameters and the concentration of PLGA, the mean hydrodynamic diameter of the monodispersed PLGA nanoparticles (PDI of 0.1-0.2) can be varied within the range of 115-150 nm. Furthermore, the successful encapsulation of a hydrophobic dye, Nile Red, is demonstrated, where a dye loading (DL) of up to 0.34% is achieved, which is in agreement with the previously reported loading of Nile Red. The in vitro release study performed for the Nile Red-loaded PLGA nanoparticles (NR-PLGA) reveals a triphasic release profile of Nile Red. In summary, this work highlights the potential of the ultrasonic microreactor as a versatile platform for the synthesis of PLGA nanoparticles suitable for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of a hybrid CuS-ICG polymeric photosensitive vector and its application in antibacterial photodynamic therapy

  • Yus, Cristina
  • Alejo, Teresa
  • Quílez, Cristina
  • Irusta, Silvia
  • Velasco, Diego
  • Arruebo, Manuel
  • Sebastian, Victor
At the present time, owing to the extremely high growth of microbial resistance to antibiotics and, consequently, the increased healthcare associated costs and the loss of efficacy of current treatments, the development of new therapies against bacteria is of paramount importance. For this reason, in this work, a hybrid synergetic nanovector has been developed, based on the encapsulation of a NIR (near infrared) photosensitive molecule (indocyanine green, ICG) in biodegradable polymeric nanoparticles (NPs). In addition, copper sulfide nanoparticles (CuS NPs), optically sensitive to NIR, were anchored on the polymeric nanoparticle shell in order to boost the generation of reactive oxygen species (ROS) upon NIR irradiation. As a result, the nanohybrid synthesized material is capable to generate ROS on demand when exposed to a NIR laser (808 nm) allowing for the repeated triggering of ROS production upon NIR light exposure. After each irradiation, the ROS generated were able to eliminate pathogenic bacteria, as it was demonstrated in-vitro with three bacterial strains, Staphylococcus aureus ATCC 25923 used as a reference strain (S. aureus), S. aureus USA300 (methicillin-resistantstrain, MRSA) and GFP-expressing antibiotic-sensitive S. aureus (methicillin-sensitive strain, MSSA). Finally, the effect of the hybrid NPs in the skin bed was tested on a plasma-derived in vitro skin model. Fluorescence and histological images showed the presence of CuS NPs all over the dermal layer lacking epidermis of the skin construct. Thus, the in vitro model facilitated the prediction of the nanovector's behavior in a human skin equivalent, showcasing its potential application against topical infections after wounding.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Drug Delivery Applications of Hydrophobic Deep Eutectic Solvent-in-Water Nanoemulsions: A Comparative Analysis of Ultrasound Emulsification and Membrane-Assisted Nanoemulsification

  • Syed, Usman T.
  • Calzada, Javier
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Piacentini, Emma
  • Giorno, Lidietta
  • Crespo, João G.
  • Brazinha, Carla
  • Sebastian, Victor
The emergence of green chemistry and engineering principles to enforce sustainability aspects has ensured the prevalence of green solvents and green processes. Our study addresses this quest by exploring drug delivery applications of hydrophobic deep eutectic solvents (DESs) which are alternative green solvents. Initially, this work showcases the hydrophobic drug solubilization capabilities of a natural hydrophobic DES, menthol, and decanoic acid. To consider biomedical applications wherein polar media are encountered, this work further demonstrates the potential drug delivery application of these systems by encapsulating the anti-inflammatory local anesthetic lidocaine in hydrophobic DES-in-water nanoemulsions. NMR studies confirm the high solubility of the hydrophobic drug in hydrophobic DES comprising menthol and decanoic acid (1:2 molar ratio). Ultrasound emulsification and energy-efficient membrane emulsification techniques were employed to disperse 4% (v/v) DES into a 2% (w/w) Tween 20 surfactant aqueous solution. An isoporous microengineered membrane (nominal pore size ∼ 9 μm) was used to produce lidocaine-loaded DES-based nanoemulsions. Such membrane-assisted nanoemulsification was possible because the hydrophobic DES exhibits relatively low interfacial tension with the continuous phase and acts as a cosurfactant. Moreover, increased concentrations of lidocaine within the DES resulted in a further decrease in the interfacial tension and a lower melting point. Among the kinetic models analyzed to evaluate the release of lidocaine encapsulated in hydrophobic DES-in-water nanoemulsions, the Korsmeyer–Peppas kinetic model provided the best fit. The release constant “n” of <0.5 indicates that the drug release mechanism is predominantly governed by diffusion. Additionally, cytotoxicity against various human cell lines demonstrated the nanoemulsion’s potential for anti-inflammatory drug delivery applications. Consequently, the nanoemulsion of DES presents a promising solution for the effective loading and delivery of poorly soluble drugs. This innovative approach enhances drug solubility and bioavailability, providing a versatile platform for controlled drug release. By leveraging the advantages of nanoemulsion technology, our study underscores the potential of DES-based formulations to promote drug delivery systems across a variety of therapeutic applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemically-Linked Heterostructures of Palladium Nanosheets and 2H-MoS2

  • Quirós-Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gomez, Andrés
  • Arenal, Raul
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastian, Víctor
The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well‐defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H‐MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently‐linked Pd nanosheet (PdNS)/functionalized MoS2 (f‐MoS2) heterostructure is introduced, leveraging PdNS infrared‐absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f‐MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f‐MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed‐dimensional heterostructures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Scalable synthesis of heteroatom-doped carbons from waste hemp hurd with enhanced sodium-ion and potassium-ion storage capabilities

  • Antorán, Daniel
  • Alvira, Darío
  • Sebastián, Víctor
  • Manyà, Joan J.
In this study, we applied an easily scalable two-step process comprising hydrothermal pretreatment with simultaneous mild heteroatom doping (N, N-S, and N-P) followed by carbonization at 800 °C to synthesize hard carbons (HCs) from waste hemp hurd for Na-ion and K-ion storage. The proposed synthesis pathway represents a viable alternative to the more energy-intensive, environmentally harmful, and/or challenging to scale up processes reported in the literature. The resulting carbons, particularly the dual NP-doped and single N-doped varieties, demonstrated improved electrochemical performance in terms of specific capacity (indicating more reversible ion storage sites) and rate capability (reflecting faster ion transport kinetics). These enhancements can be attributed to structural and surface chemistry modifications introduced during hydrothermal pretreatment. For Na-ion storage, the N-doped HC achieved a specific capacity of 293.6 mAh g−1 at 0.1 A g−1 (and 125 mAh g−1 at 1 A g−1) with an initial coulombic efficiency (ICE) of 73.5 % using an ester-based electrolyte. The same material showed an enhanced rate capability when an ether-based electrolyte was employed, achieving 155 mAh g−1 at 1 A g−1. For K-ion half-cells, the dual N-P-doped HC exhibited the best performance at low current rates, delivering a specific capacity of 260 mAh g−1 at 0.1 A g−1 in ester-based electrolytes. However, the N-doped HC showed the best rate capability at 2 A g−1 (57 mAh g−1), which is a reasonable value given the lack of mesopores in produced HCs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High performing and sustainable hard carbons for Na-ion batteries through acid-catalysed hydrothermal carbonisation of vine shoots

  • Alvira, Darío
  • Antorán, Daniel
  • Darjazi, Hamideh
  • Elia, Giuseppe Antonio
  • Gerbaldi, Claudio
  • Sebastian, Victor
  • Manyà, Joan J.
This study investigates the synthesis of hard carbons via acid-assisted hydrothermal carbonisation (HTC) of vine shoots, followed by thermal annealing, to be used as Na-ion battery anodes. Various carbons with diverse pore structures, ordering degrees, 2D morphologies, and chemical compositions are obtained using 2 mol dm-3 solutions of HNO3, HCl, H2SO4, or H3PO4 as the hydrothermal media. Compared to standard ester-based liquid electrolytes, the use of a diglyme-based electrolyte (NaPF6/DGM) substantially boosts both the initial coulombic efficiency (ICE) and the specific capacity, particularly evident with the highly ordered and porous H3PO4-1000 and HCl-1000 carbons. These materials exhibit outstanding performance, storing 200 mAh g-1 at 2 A g-1 and showing ICE values of 68% and 77%, respectively. The improved stability and capacity are attributed to the formation of a more stable and thinner solid electrolyte interface (SEI), along with sodium storage into graphitic regions through a solvent co-intercalation reaction. While ester-based electrolytes limit hard carbon mesoporosity and require the promotion of turbostratic domains, ether-based electrolytes enable the development of more ordered and porous carbons, enhancing transport kinetics, sodium storage capacity, and electrode stability. Overall, acid-catalysed HTC offers a sustainable pathway for tailoring hard carbon based electrodes, repurposing biomass residues into valuable materials for green and low-cost energy storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Continuous exfoliation of 2H-MoS2 in a microwave-heated microfluidic contactor

  • Quirós-Ovies, Ramiro
  • Sabanés, Natalia Martín
  • García-Pérez, Cristina
  • Bernardo-Gavito, Ramón
  • Granados, Daniel
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastian, Víctor
Microwave (MW)-assisted exfoliation of molybdenum disulfide (MoS2) has been demonstrated to produce exceptionally large area (in the µm2 range), ultrathin (< 4 layers) flakes operating in the batch mode. Here, we develop a continuous system capable of producing few-layer MoS2 flakes of similar quality to those obtained through the batch procedure but with enhanced efficiency and scalability. The proposed microfluidic-based method introduces a controlled, stable, and reproducible process for exfoliating MoS2 in a liquid medium. By optimizing parameters such as flow rate, channel geometry, power of the MW heating and solvent selection, we were able to consistently achieve flake sizes in the µm range and thicknesses below 6 nm, comparable to those obtained via batch MW exfoliation. The continuous nature of the system allows for scalable production, addressing one of the major limitations of batch processes. While developed for MoS2 flakes, it can be translated to any two-dimensional (2D) material with suitable microwave-absorbing properties, potentially paving the way for the continuous production of a wide variety of large-area ultrathin flakes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Two-step and one-step approach for the in situ synthesis of palladium nanosheets on zein nanoparticle surface using membrane nanoprecipitation

  • Condello, A.
  • Piacentini, E.
  • Sebastián, V.
  • Giorno, L.
Metal nanostructures with Surface Plasmon Resonance (SPR) properties have garnered interest in applications like optical sensing, photothermal therapy, and optical waveguiding. While synthetic polymers commonly serve as carriers, integrating metal nanostructures with natural-based polymers enhances biocompatibility and biodegradability. With its amine and hydroxyl groups, zein is an ideal material for metal ion interaction enabling efficient surface functionalization of zein nanoparticles (ZNPs). Here, it is demonstrated that zein not only could act as an ideal biopolymeric carrier but also provide an optimal platform for synthesizing anisotropic structures such as palladium nanosheets (PdNS). Two approaches were explored: (i) a two-step approach, involving the preparation of ZNPs via membrane nanoprecipitation (MN) followed by in situ PdNS synthesis using K₂PdCl₄ in a gas-phase carbon monoxide (CO)-confined growth method; and (ii) one-step approach, employing the Pd precursor as the non-solvent during ZNPs nanoprecipitation. For ZNPs-Pd synthesized by the two-step method the influence of variables such as pH, salt, surfactant, and ethanol were evaluated. For one-step approach, to address scalability limitations, ZNPs-Pd nanoprecipitation was performed in a continuous MN process using a 0.2 µm SPG membrane, without using stabilizing agents. TEM imaging confirmed successful, selective PdNS formation on ZNP surfaces without compromising structural integrity. ICP-MS analysis validated the high yield. The ZNPs-Pd demonstrated photothermal activity in the NIR region, achieving temperatures up to 49.6°C. Despite thermal stress, ZNPs-Pd maintained structural stability, marking a significant advancement in the scalable fabrication of biocompatible, photothermally active nanostructures for biomedical and optical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CO2 Methanation over Ni Catalysts Supported on Pr-Doped CeO2 Nanostructures Synthesized via Hydrothermal and Co-Precipitation Methods

  • Tsiotsias, Anastasios I.
  • Charisiou, Nikolaos D.
  • Dabbawala, Aasif A.
  • Hussien, Aseel G. S.
  • Sebastian, Victor
  • Hinder, Steven J.
  • Baker, Mark A.
  • Mao, Samuel
  • Polychronopoulou, Kyriaki
  • Goula, Maria A.
The synthesis method of the Pr-doped CeO2 catalyst support in Ni/Pr-CeO2 CO2 methanation catalysts is varied by changing the type/basicity of the precipitating solution and the hydrothermal treatment temperature. The use of highly basic NaOH as the precipitating agent and elevated hydrothermal treatment temperature (100 or 180 °C) leads to the formation of structured Pr-doped CeO2 nanorods and nanocubes, respectively, whereas the use of a mildly basic NH3-based buffer in the absence of hydrothermal treatment (i.e., co-precipitation) leads to an unstructured mesoporous morphology with medium-sized supported Ni nanoparticles. The latter catalyst (Ni/CP_NH3) displays a high surface area, high population of moderately strong basic sites, high oxygen vacancy population, and favorable Ni dispersion. These properties lead to a higher catalytic activity for CO2 methanation (75% CO2 conversion and 99% CH4 selectivity at 350 °C) compared to the catalysts with structured nanorod and nanocube support morphologies, which are found to contain a significant amount of leftover Na from the synthesis procedure that can act as a catalyst inhibitor. In addition, the best-performing Ni/CP_NH3 catalyst is shown to be highly stable, with minimal deactivation during time-on-stream operation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Biomimetic apatite nanoparticles and microcrystalline tyrosine as biocompatible vaccine adjuvants: performance in a bluetongue virus sheep model

  • Pérez, Estela
  • Sebastián, Víctor
  • Rodríguez-Largo, Ana
  • de Miguel, Ricardo
  • Gómez, Álex
  • Kramer, Matthias F.
  • Graessel, Anke
  • Parra-Torrejón, Belén
  • Delgado-López, José Manuel
  • Utrilla-Trigo, Sergio
  • Jiménez-Cabello, Luis
  • Ortego, Javier
  • de Blas, Ignacio
  • Reina, Ramsés
  • Pérez, Marta
  • Luján, Lluís
Aluminum oxyhydroxide (AlOOH) is the most widely used vaccine adjuvant, but its known adverse effects prompt the finding of other, safer alternative adjuvants. This study compares in sheep the global performance and safety of vaccine prototypes against bluetongue virus (BTV) formulated with AlOOH, biomimetic apatite nanoparticles (ApNPs), and microcrystalline tyrosine (MCT). Five groups of 6 sheep were included in the study: control, BTV serotype 4 alone, and BTV-4 combined either with AlOOH, ApNPs, or MCT. Adjuvants were fully characterized. Group specific antibodies against BTV-4 were observed in all treatment groups, including BTV-4 alone. After booster inoculation, ApNPs or MCT groups responded immediately, and it was delayed for BTV-4 and AlOOH groups. Comparable neutralizing antibody responses were observed in all treatment groups but were earlier for BTV-4, ApNPs, and MCT groups when compared with the AlOOH group. No significant systemic alterations were observed during the study. The AlOOH group developed more pronounced local reactions that persisted throughout the 133-day study and were evident as post-mortem granulomas. ApNPs and MCT are biocompatible, safer, and viable alternative adjuvants for sheep vaccines. BTV alone might also be suitable for this purpose. This work is the first demonstrating the suitability of biocompatible alternative adjuvants in sheep vaccines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unlocking the potential of bacterial membrane vesicles: Advances in isolation techniques and biomedical applications

  • Canalejo-Marco, Gonzalo
  • Arruebo, Manuel
  • Sebastian, Victor
Bacterial membrane vesicles (MVs) are nanosized, lipid bilayer-enclosed structures released by both Gram-positive (commonly referred as MVS, bacterial membrane vesicles) and Gram-negative bacteria (commonly referred as OMVs, outer membrane vesicles and outer-inner membrane vesicles (OIMVs)). They carry proteins, lipids, nucleic acids, and metabolites, playing key roles in intercellular communication, host–pathogen interactions, and immune modulation. Owing to these properties, MVs are attracting growing interest as versatile tools for vaccine development, drug delivery, and diagnostic applications. However, their translation remains constrained by low production yields, potential toxicity, and the lack of standardized isolation and characterization methods. This review summarizes current knowledge on MV composition and biogenesis, with a particular focus on emerging strategies for their isolation and engineering, and highlights their biomedical potential while outlining the challenges that must be overcome to enable future clinical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An à la Carte Synthesis Approach for Chemically Linking Au, Pt, and Pd Nanoparticles to Few‐Layer 2H‐MoS

  • Quirós-Ovies, Ramiro
  • Bonet, Javier
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
The combination of 2D materials and metallic nanoparticles (NPs) enables the creation of hybrid systems with enhanced properties, such as improved light absorption via plasmon resonance or the introduction of active catalytic sites. However, effectively interfacing 2D materials with NPs remains challenging. This work presents a novel and efficient à la carte synthesis approach that enables the tailored chemical linkage of noble metal NPs—gold (Au), platinum (Pt), and palladium (Pd)— to ultrathin 2H-MoS2 sheets using orthogonal maleimide-based linkers. Specifically, alkyne-, carboxylic acid-, and phenyl bromide-terminated maleimides are employed to anchor Au, Pt, and Pd NPs, respectively. This modular strategy allows precise control over the surface chemistry, leading to uniform decoration with sub-2 nm NPs and robust attachment to the MoS2 substrate. This chemical linkage is expected to enhance the interaction between the MoS2 and the NPs while also improving the mechanical stability of the hybrid material. These combined effects make the system particularly promising for applications requiring both strong interfacial coupling and durability, such as electrocatalysis, sensing, and flexible electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Versatile and sustainable nanocolloids of au@tannic acid coordinated with fe(iii) ions for layers deposition on the plasmochemicaly activated ti6al7nb alloy

  • Matlak, Teresa
  • Kyziol, Karol
  • Kleszcz, Kamil
  • Jedrzejczyk, Roman J.
  • Sebastian, Victor
  • Kyziol, Agnieszka
The rejection of implanted orthopaedic devices is often associated with the formation of bacterial biofilm on their surface, which results in a slow process of tissue regeneration surrounding the implant, as well as poor osteointegration. Proper functionalization of the surface of orthopaedic implants could help mitigate this problem. This study focused on the surface modification of the medical alloy Ti6Al7Nb through plasma-chemical treatment (PA RF CVD – Plasma Activated Radio Frequency Chemical Vapour Deposition) and post-deposition of bioactive coatings involving Au nanoparticles derived from the reductive action of tannic acid and complexed with Fe(III) ions. The plasma-chemical process using Ar-O2 mixture contributed to surface activation and increased the oxygen content in the outer layer. Whereas, the introduction of additional top biopolymeric coating (chitosan, hyaluronic acid) positively influenced the biocompatibility of the resulting coatings. The resulting coatings are chemically stable with no signs of delamination. Moreover, in vitro studies revealed biocompatibility (Saos-2 cell line) with prospective bacteriostatic activity at the doses tested (Escherichia coli, Bacillus paramycoides). The development of novel inorganic-organic hybrid coatings with antioxidant activity, antibacterial properties, and biocompatibility indicates good prospects for the use of these coatings in implantology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesizing porous nanospheres with highly efficient drug loading and sustained release through a thermal-controlled continuous stirred-tank reactor cascade

  • Chen, Huiyu
  • Udepurkar, Aniket Pradip
  • Clasen, Christian
  • Sebastián Cabeza, Victor
  • Kuhn, Simon
Advancing drug-loading efficiency and sustained release in PLGA nanospheres through a core-loading strategy, enabled by an engineering-optimized, temperature-controlled CSTR cascade for continuous production. Created with Biorender.com.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A rationally designed polypeptide-based hybrid platform for targeted intranasal brain drug delivery

  • Conejos-Sánchez, Inmaculada
  • Melnyk, Tetiana
  • Masiá, Esther
  • Morelló-Bolumar, Daniel
  • Tortajada-Comeche, Luz
  • Dolz-Pérez, Irene
  • Torrijos-Saiz, Lucía Inés
  • Tenhaeff, Paula
  • Roosz, Julia
  • Moruzzi, Alessia
  • Sogorb, Gloria
  • Medel, Maria
  • Loskill, Peter
  • Roselló, Esther
  • Sebastian, Victor
  • Florindo, Helena
  • Felip-León, Carles
  • Nebot, Vicent J.
  • Herranz-Pérez, Vicente
  • García-Vedugo, José Manuel
  • Vicent, María J.
Intranasal administration represents a safe and non-invasive route for drug delivery to the brain; however, clinical translation remains limited due to anatomical and physiological barriers. We present a modular hybrid biomaterial platform (NanoInBrain) that bypasses the blood-brain barrier via the olfactory route and enables central nervous system (CNS) drug delivery. The platform integrates a rationally designed polypeptide-based nanocarrier with a depot-forming hydrogel vehicle - a hyaluronic acid–poly-L-glutamate crosspolymer (HA-CP, Yalic®) - adapted from dermatological applications to enhance nasal mucosal retention and brain uptake. We engineered the nanocarrier system using star-shaped poly-L-glutamate (StPGA) architectures and systematically tuned physicochemical properties to optimize mucosal interaction and CNS diffusion. We introduced mucoadhesive and mucodiffusive functionalities via C-terminal odorranalectin (OL) conjugation, which improved nasal epithelium permeation through receptor-mediated mechanisms. Redox-responsive disulfide crosslinking (StPGA-CL-SS) further enhanced mucosal transport by enabling thiol-mediated anchoring to mucin glycoproteins, outperforming inert click-crosslinked variants. Ex vivo Franz diffusion studies and a nasal-mucosa-on-chip model demonstrated robust permeation, with in vivo imaging confirming brain distribution and intracellular uptake in neurons and microglia. Incorporation of HA-CP prolonged nasal residence (∼4 h) and increased total brain accumulation while being well-tolerated. This new platform combines architectural tunability, bioresponsive surface chemistry, and depot-mediated delivery in a scalable, biocompatible nose-to-brain delivery system with potential for treating neurological disorders.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functionalized carbon nanoparticles for smartphone-based sensing of formaldehyde

  • Cavallaro, Alessia
  • Russo, Lorenzo
  • Sebastián, Víctor
  • Ruffino, Roberta
  • Li Destri, Giovanni
  • Ferreri, Loredana
  • Consoli, Grazia Maria Letizia
  • Gulino, Antonino
  • Ferlazzo, Angelo
  • Pappalardo, Andrea
  • Santonocito, Rossella
  • Petroselli, Manuel
  • Tuccitto, Nunzio
  • Trusso Sfrazzetto, Giuseppe
A dopamine-functionalized carbon nanoparticle enables supramolecular, smartphone-based detection of formaldehyde in air and water, with limits of detection well below WHO guidelines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic-Assisted Coating of Nanoparticles by Membranes from Extracellular Vesicles

  • Alonso-Campos, Pablo
  • Balas, Francisco
  • Hueso, Jose L.
  • Sebastián, Víctor
  • Sancho-Albero, María
  • Santamaría, Jesus
Extracellular vesicle (EV)-based nanotherapies represent a promising alternative in cancer nanomedicine thanks to their targeting properties. However, two major issues remain when combining nanoparticles (NPs) with EVs: (1) safety concerns of cancer-derived EVs related to their oncogenic nature and (2) lack of robust, reproducible, and efficient strategies for NPs coating with EVs membranes. To overcome these main challenges, in this study, we have combined a microfluidic platform to direct the reassembly of previously isolated EVs-derived membranes from lung cancer cells onto fluorescent silica NPs (FSNs). These FSNs leverage the versatile surface functionalization of silica NPs together with intrinsic fluorescent properties for precise intracellular tracking of our hybrids, avoiding membrane-labeling fluorescent probes. While preserving the tumor-targeting properties of natural lung cancer-derived EVs, the proposed microfluidic strategy offers superior handling and manipulation of the process to guarantee (1) homogeneous EV-like coating (6.3 nm thick), (2) high reproducibility, (3) efficient coating yields (87.8% of the NPs were coated), and (4) selective tumor-targeting properties (8.0- and 4.3-fold increases for parental A549 tumoral cells compared to HeLa and fibroblasts at 4 h, respectively). This technology enables the fabrication of biomimetic hybrid core−shell structures with high precision and stability in a continuous process that is more amenable to scaling up.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic reactors for the synthesis of inorganic and hybrid nanoparticles for drug delivery

  • Sebastián, Víctor
Inorganic nanoparticles (NPs) have played a central role in the development of nanomedicine, offering unique physicochemical properties that enable imaging, therapy, and multifunctional drug delivery. Despite extensive progress, the clinical translation of nanomedicines remains limited, largely due to challenges associated with reproducibility, scalability, toxicity, and, critically, inefficient delivery to target tissues. In this context, microfluidic technologies have emerged as a powerful platform to address many of these limitations by enabling continuous, highly controlled, and reproducible NP synthesis under well-defined flow conditions. This review provides a comprehensive overview of recent advances in the continuous-flow microfluidic synthesis of inorganic NPs for drug delivery applications. Key microfluidic parameters governing NP formation are discussed, including mixing regimes, residence time, flow configuration, and scale-up, and analyze how these factors influence size, dispersity, composition, and functional performance. Particular attention is devoted to plasmonic NPs, non-metallic magnetic NPs, and other relevant inorganic systems such as quantum dots and silica NPs, highlighting both achievements and remaining challenges in their microfluidic production. Beyond purely inorganic NPs, the review examines the growing field of hybrid organic–inorganic NPs, where inorganic cores are integrated with polymers, lipids, or biomimetic components to combine synthetic functionality with biological performance. These hybrid architectures represent a promising strategy to overcome key barriers in drug delivery, including immune clearance, poor targeting efficiency, and limited therapeutic index, while posing additional synthetic and integration challenges that microfluidics is uniquely positioned to address. Finally, current bottlenecks and future perspectives for microfluidic nanomanufacturing are discussed, including productivity, multistep process integration, in-line purification, and automation. Microfluidic platforms, especially when combined with hybrid and bioinspired NP design, are positioned as enabling technologies to bridge the gap between advanced NP engineering and clinically translatable nanomedicines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improved drug delivery across the blood-brain barrier through post-insertion functionalization of lipid nanocapsules with cannabidiol using click chemistry

  • Pérez-López, Alexandre
  • Aparicio-Blanco, Juan
  • Martín-Sabroso, Cristina
  • Martins, Cláudia
  • Gómez-Lázaro, Laura
  • Sebastián, Víctor
  • González-Matilla, Juan Francisco
  • Sarmento, Bruno
  • Torres-Suárez, Ana Isabel
Crossing the blood-brain barrier (BBB) remains a major challenge in drug delivery for central nervous system (CNS) diseases. This study presents a covalent functionalization strategy to attach cannabidiol (CBD), the major non-psychotropic phytocannabinoid, to lipid nanocapsules (LNCs) to enhance their BBB permeability in vitro and in vivo. Using click chemistry, two highly monodisperse CBD-functionalized LNC formulations are prepared, LNC1CBD and LNC2CBD, with sizes of 27.0 ± 0.8 nm and 55.0 ± 2.5 nm, and functionalization efficiencies of 30.82 ± 5.93% and 29.59 ± 8.34%, respectively. LNC2CBD exhibits a 55.77% increase in cellular uptake relative to non-functionalized LNCs. In vitro permeability assays demonstrate that LNC1CBD significantly enhances translocation across the healthy BBB at earlier timepoints (4, 8 and 12 h), whereas LNC2CBD exhibits enhanced permeability at later stages (12 and 24 h) compared to their non-functionalized counterparts. This trend is maintained in a diseased BBB model, where CBD functionalization significantly improves permeability at nearly all timepoints for both formulations. Biodistribution studies in healthy mice validate these findings. LNC1CBD significantly increases brain accumulation by 14.87% at 30 min, while LNC2CBD maintains this effect, reaching 17.64% at 30 min, 38.23% at 90 min and 73.53% at 240 min, relative to non-functionalized LNCs. These findings underscore the potential of LNCs covalently functionalized with CBD as a promising platform for CNS-targeted delivery, which can ultimately open new avenues for therapeutic agents that do not usually reach the brain parenchyma at effective concentrations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Translating hybrid CuS-indocyanine green-polymer nanoparticle production into flow: Multistage synthesis, purification, and photodynamic biocidal activity

  • Ruiz-Bozal, Pablo
  • Abengochea, Lucia
  • Bescos, Isabel
  • Herrero, Paola
  • Yus, Cristina
  • Arruebo, Manuel
  • Sebastian, Victor
Hybrid polymeric nanoparticles encapsulating indocyanine green (ICG) and decorated with copper sulfide (Cu₂–ₓS) were synthesized using semi-continuous micro- and millifluidic reactors (RS-PLGA-ICG@μCuS and RS-PLGA-ICG@mCuS, respectively). By leveraging both components as NIR-active photosensitizers, these nanoparticles were developed for enhanced antimicrobial photodynamic therapy. Continuous microfluidic processing enabled higher ICG loading than batch synthesis while maintaining tight control over particle size, ζ-potential, and copper content. Computational fluid dynamics modelling of the micromixer revealed the critical role of flow patterns and local shear stresses in achieving homogeneous nanoprecipitation. Continuous downstream processing was implemented using hollow-fiber tangential flow filtration, enabling solvent removal and nanoparticle conditioning under flow. A millifluidic reactor was further introduced as a scale-out strategy, increasing production throughput while preserving reproducibility of nanoparticle properties. Photodynamic performance was assessed using DHR 123 and SOSG probes, confirming efficient reactive oxygen species generation, predominantly via type I pathways, with 50 ppm ICG identified as the optimal concentration. Both micro- and millifluidic formulations showed reproducible activity. Bactericidal assays demonstrated significant efficacy against planktonic and biofilm-forming Staphylococcus aureus ATCC 25923, achieving higher log reductions than batch-produced nanoparticles due to improved photosensitizer encapsulation. Cytotoxicity studies with human dermal fibroblasts confirmed viability above ISO 10993-5 thresholds (>70%), with continuous-flow formulations exhibiting reduced copper-related toxicity. The semi-continuous strategy developed represents a scalable and intensified platform for manufacturing multifunctional antibacterial nanovectors with enhanced performance and biocompatibility.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Macrophage-Mediated In Vivo Intracellular Crystallization of Aluminum Oxyhydroxide Adjuvant in Vaccine-Induced Granulomas

  • Pérez, Estela
  • Navarro, Marta
  • Ibarra, Alfonso
  • de Blas, Ignacio
  • Pérez, Marta
  • Luján, Lluís
  • Sebastián, Víctor
Aluminum (Al) in the form of γ-aluminum oxyhydroxide (γ-AlOOH) nanoparticles has been used as a vaccine adjuvant for nearly a century. At injection sites, animals and humans develop granulomatous inflammation, in which macrophages may contain intracellular crystalline-like structures, so-called crystalloid bodies (CBs), morphologically distinct from the injected adjuvant. This raised the hypothesis that CBs may originate from the in vivo crystallization of γ-AlOOH within macrophages. To test this, six sheep received two subcutaneous doses of a γ-AlOOH-adjuvanted viral vaccine, while six controls received the same antigen without an adjuvant. All injection sites (AlOOH: n = 12; controls: n = 12) were examined by hematoxylin and eosin, modified aluminum hematoxylin, and lumogallion fluorescence. Al and CBs occurred exclusively in AlOOH-vaccinated tissues. The adjuvant stock and vaccine formulations were characterized ex situ using a combination of structural and imaging techniques. Four granulomas containing CBs, collected 133 days postinjection, were further examined using in situ imaging and crystallographic approaches. No crystalline structures resembling CBs were identified in the injected products; only γ-AlOOH nanoparticles were present. In post-mortem granulomas, macrophages contained Al-positive vacuoles filled with nanoparticle aggregates compatible with γ-AlOOH, often adjacent to CBs. Crystallographic analyses demonstrated that CBs were highly ordered γ-Al2O3 microcrystals, and advanced SEM-EDS with elemental mapping similarly distinguished γ-AlOOH nanoparticles and CBs as separate phases. These findings support an in vivo formation of γ-Al2O3 microcrystals from γ-AlOOH nanoparticles within macrophages under physiological conditions. To our knowledge, these findings provide evidence consistent with Al crystallization within mammalian cells and suggest that macrophage phagolysosomal conditions may represent a previously unrecognized biomimetic pathway for γ-Al2O3 formation. This finding may offer a biological model for the development of green and low-energy synthesis strategies for γ-Al2O3, with potential industrial applications as well as relevance to immunotoxicology, pathology, and cell biology in the context of vaccine adjuvants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functional Hybrid Chitosan Coatings With Cu Nanoparticles on the Shape Memory NiTi Enabling Bactericidal Activity

  • Jablonski, Piotr
  • Kyziol, Agnieszka
  • Krawiec, Halina
  • Sebastián, Victor
  • Kyziol, Karol
In this study, we introduce a hybrid approach for fabricating multifunctional coatings composed of chitosan and copper nanoparticles (CuNPs) on NiTi substrates. The fabrication process combines the immersion technique for chitosan layer deposition with inert gas condensation (IGC) based on magnetron sputtering for the generation of CuNPs. This method enables precise control over nanoparticle size and concentration, allowing for their uniform incorporation into a biopolymer matrix. The resulting CS/CuNPs/CS multilayers exhibit excellent surface coverage, nanoscale roughness (Ra of 30–65 nm), and moderately hydrophilic character (contact angle of 30°–35°), which collectively support cell adhesion and proliferation. Surface characterization confirmed the stability and durability of the coatings, which can be attributed to prior substrate activation using Piranha solution and plasma treatment. Electrochemical tests demonstrated enhanced corrosion resistance of the CS/CuNPs/CS layers, with a reduced current density (4.10 × 10−4 mA/cm2) and good temporal stability. In vitro studies using the MG-63 osteoblast-like cell line indicated non-cytotoxicity response of the coatings, confirming their plausible applicability in tissue engineering. Antibacterial assays revealed effective inhibition of Staphylococcus aureus growth and complete elimination of Escherichia coli, highlighting the strong bactericidal potential of the developed system. Moreover, Cu ion release within the surface layer profiles obtained in Ringer's solution over a 7-day period showed a predominantly linear release of copper ions, indicating a controlled and sustained antimicrobial effect. The ability to modulate chitosan layer thickness and nanoparticle loading during sequential deposition steps enables the customization of the coating properties to meet specific therapeutic requirements while minimizing nanoparticle usage. This strategy offers a promising platform for developing safe, effective, and tunable antibacterial coatings for biomedical implants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Peripheral Dendritic Functionalization Effects on the Self-Assembly and Thermoresponsive Behavior of Nonionic Amphiphilic Linear–Dendritic Block Copolymers in Aqueous Media

  • Martín-Martín, Javier
  • Folch-Cirujeda, Luis
  • Yus, Cristina
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Abad, Miriam
  • Sebastián, Víctor
  • Oriol, Luis
  • Piñol, Milagros
Nonionic amphiphilic block copolymers with a precise linear–dendritic architecture that exhibit thermoresponsive behavior in water are described. These copolymers consist of a hydrophilic poly(ethylene glycol) (PEG) block connected to a thermoresponsive block based on the fourth generation of 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) polyester dendron, functionalized at the periphery with either ureido or glycinamide groups. In water, these linear–dendritic block copolymers (LDBCs) self-assemble into different nanostructures whose size, morphology, and thermoresponse are strongly dependent on the peripheral groups and PEG chain length. The LDBC bearing peripheral ureido groups self-assembles into small micelles that, above the cloud point temperature (Tcp), evolve into a coacervate phase rather than fully dissolve. In contrast, the glycinamide-functionalized LDBCs display characteristic UCST-type behavior. The results demonstrate that subtle structural variations in the dendron periphery within a precise linear–dendritic architecture induce significant differences in the self-assembly and thermoresponse in water. Preliminary studies on the encapsulation and thermally triggered release of Nile Red, together with high cytocompatibility of these LDBCs toward several eukaryotic cell lines, suggest their potential for drug delivery systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Smartphone-Assisted Approach to Formaldehyde Detection Using Diethanolamine-Grafted Carbon Nanoparticles

  • Santonocito, Rossella
  • Russo, Lorenzo
  • Sebastian, Victor
  • Ferlazzo, Angelo
  • Gulino, Antonino
  • Petroselli, Manuel
  • Ruffino, Roberta
  • Li Destri, Giovanni
  • Pappalardo, Andrea
  • Tuccitto, Nunzio
  • Cavallaro, Alessia
  • Trusso Sfrazzetto, Giuseppe
Formaldehyde (FA) is a well-known indoor pollutant and human carcinogen, making the development of field-deployable sensors for its monitoring crucial for public safety. Herein, we report a facile strategy to synthesize carbon nanoparticles functionalized with diethanolamine (CNPs-DEA) as FA sensors. The strategic surface functionalization dictates a specific spatial arrangement that is key to efficient and cooperative interaction with the analyte. In water solution, the probe exhibits a LOD of 46 ppb with a binding constant (log β) value of 4.31 ± 0.01. By immobilizing the CNPs on polyamide membranes, we engineered a solid-state strip test integrated with a 3D-printed smartphone readout platform. This setup delivers an ultralow detection threshold (1 ppb) for gaseous FA and, crucially, maintains robust performance under saturated humidity conditions, overcoming a major limitation of conventional carbon-based sensors. The practical utility of the device was validated by quantifying FA in commercial paint samples. Combining operational simplicity, low cost, and high sensitivity, this platform represents a robust early warning tool for air quality monitoring, bridging the gap between sophisticated laboratory instrumentation and accessible real-world applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing PLGA nanosphere synthesis in a continuous ultrasonic microreactor: A design of experiments and machine learning joint approach

  • Chen, Huiyu
  • Bassim, Oussama
  • Udepurkar, Aniket Pradip
  • Sebastián Cabeza, Victor
  • Kuhn, Simon
Nanospheres hold strong promise as drug-delivery carriers but face challenges in precisely achieving target particle sizes required for specific biomedical applications. Here, we present a novel strategy that leverages the synergy between Design of Experiments (DoE) and Machine Learning (ML) to optimize and predict poly(lactic-co-glycolic acid) (PLGA) nanosphere synthesis in a continuous ultrasonic microreactor. DoE screening and optimization were first performed to maximize information gain while minimizing experimental runs, generating 41 statistically designed experiments for ML model training. Hyperparameters of five traditional ML models and one deep learning model were then systematically optimized using this dataset. To independently evaluate model performance, 12 additional experiments were conducted to assess predictive accuracy and computational efficiency. Among all models, k-nearest neighbours achieved the highest accuracy (R-sq = 0.92) with the shortest computation time. Overall, this work demonstrates an efficient DoE-ML framework for rapid, accurate, and data-driven tuning of nanosphere size for nanomedicine applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sensing of human stress biomarkers using BODIPY-functionalized carbon nanoparticles

  • Cavallaro, Alessia
  • Spinello, Michael
  • Sebastián, Víctor
  • Ferlazzo, Angelo
  • Gulino, Antonino
  • Ruffino, Roberta
  • Destri, Giovanni Li
  • Pappalardo, Andrea
  • Tuccitto, Nunzio
  • Sfrazzetto, Giuseppe Trusso
  • Santonocito, Rossella
Stress affects many aspects of human functioning, and its effects on cognition are particularly relevant in high performance scenarios such as military operations and space missions. Dopamine, noradrenaline, and cortisol are key biomarkers associated with stress, anxiety, depression, and cardiovascular disease, yet their qualitative and quantitative detection usually requires lengthy laboratory analyses and lacks a single, selective one-pot method. In this work, we developed a fluorescent nanosensor based on carbon nanoparticles functionalized with a BODIPY-based fluorophore (CNPs-Ar-BDPy) for the detection and discrimination of dopamine, noradrenaline, and cortisol in aqueous solution. The sensing platform exploits the carbon nanoparticle core as a structural scaffold and the BODIPY moiety as a recognition site, enabling specific interactions with catecholamines and cortisol through hydrogen bonding between the BODIPY fluorine atoms and the OH and C=O groups of the analytes. The CNPs-Ar-BDPy were synthesized, functionalized, and fully characterized by UV Vis and fluorescence spectroscopy, and their sensing performance was evaluated in aqueous media using fluorescent titration and FT-IR. Selectivity was further assessed using multivariate analysis by PLS-DA, demonstrating effective discrimination among the three biomarkers. In addition, the role of the covalent linkage between the carbon nanoparticle core and the BODIPY unit was investigated, and the obtained apparent affinity constants were compared with those of analogous nanoprobes featuring a non-rigid, non-preorganized spacer. The rigid aryl linked BODIPY proved to enhance binding by about two orders of magnitude, highlighting the importance of structural preorganization and fluorescence continuity across the core fluorophore interface. The proposed nanosensor thus represents a promising tool for rapid, selective monitoring of stress related biomarkers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and mechanistic insights on the CO2 hydrogenation to ethanol over KRhFe supported catalysts: a study of support effect

  • Latsiou, Angeliki I.
  • Charisiou, Nikolaos D.
  • Frontistis, Zacharias
  • Naikwadi, Dhanaji
  • Bansode, Atul
  • Mariani, Pietro
  • Orsilli, Jacopo
  • D’Arienzo, Massimiliano
  • Sebastián, Víctor
  • Marshall, Ali
  • Potter, Matthew E.
  • Goula, Maria A.
The effect of the support on the CO2 hydrogenation to ethanol reaction over KRhFe catalysts supported on different oxides (SiO2, Al2O3, TiO2, TiO2-ZrO2, and SiO2-Al2O3) was investigated through a multi-technique approach combining catalytic tests with extensive physicochemical characterisation, including XAS and operando DRIFTS-MS. H2-TPR, TEM and XAS analyses revealed that non-reducible supports, such as SiO2 and Al2O3, stabilise partially oxidised, well-dispersed Rh and Fe species, while maintaining moderate Rh–Fe interactions. In contrast, reducible supports like TiO2 and TiO2-ZrO2 facilitate the reduction of RhOx and FeOx species. This translates into markedly different catalytic behaviours: SiO2 and Al2O3-supported catalysts exhibited enhanced selectivity towards ethanol, whereas TiO2 and TiO2-ZrO2-supported catalysts showed higher CO2 conversion, predominantly yielding CO and CH4. Operando DRIFTS-MS results further revealed plausible support-dependent surface intermediates and reaction pathways. The SiO2-supported catalyst appears to mainly follow a CO-mediated pathway, while the Al2O3-supported catalyst exhibited intense formate-related features, suggesting the participation of formate/methoxy intermediates in oxygenate formation. In contrast, TiO2 promoted RWGS and methanation reactions, limiting C–C coupling. Finally, the incorporation of ZrO2 into the support (TiO2-ZrO2) improved the formation of oxygenates compared to TiO2 alone, likely due to enhanced stabilisation of adsorbed CO species and their coupling with methoxy intermediates. Overall, these results underscore the critical role of metal–support interactions in governing the selectivity between C1 products and oxygenates during high-pressure CO2 hydrogenation.