Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aberration-corrected transmission electron microscopy with Zernike phase plates

  • Hettler, Simon
  • Arenal, Raúl
We explore the possibility of applying physical phase plates (PPs) in combination with aberration-corrected transmission electron microscopy. Phase-contrast transfer characteristics are calculated and compared for a thin-film based Zernike PP, a hole-free (HF) or Volta PP and an electrostatic Zach PP, considering their phase-shifting properties in combination with partial spatial coherence. The effect of slightly converging illumination conditions, often used in high-resolution applications, on imaging with PPs is discussed. Experiments with an unheated Zernike PP applied to various nanomaterial specimens and a qualitative analysis clearly demonstrates the general compatibility of PPs and aberration-corrected transmission electron microscopy. Calculations and experiments show the benefits of the approach, among which is a strong phase-contrast enhancement of a large range of spatial frequencies. This allows the simultaneous imaging of atomic-resolution structures and morphological features at the nanometer scale, with maximum phase contrast. The calculations can explain why the HFPP damps contrast transfer at higher spatial frequencies., The authors acknowledge funding by German Research Foundation (DFG project He 7675/1-1), from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, by the Spanish MICINN (PID2019-104739GB-100/AEI/10.13039/501100011033), by the Government of Aragòn (Project DGA E13-20R) and from the European Union H2020 programs ”ESTEEM3” (Grant number 823717) and ”Graphene Flagship” CORE 3 (Grant number 881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon-film-based Zernike phase plates with smooth thickness gradient for phase-contrast transmission electron microscopy with reduced fringing artefacts

  • Obermair, Martin
  • Hettler, Simon
  • Dries, Manuel
  • Hugenschmidt, M.
  • Spiecker, R.
  • Gerthsen, Dagmar
Phase plates (PPs) in transmission electron microscopy (TEM) improve the contrast of weakly scattering objects under in-focus imaging conditions. A well-established PP type is the Zernike (Z)PP, which consists of a thin amorphous carbon (aC) film with a microscaled hole in the centre. The mean inner potential of the aC film is exploited to shift the phase of the scattered electrons while the unscattered electrons in the zero-order beam propagate through the hole and remain unaffected. However, the abrupt thickness increase at the hole edge induces an abrupt change of the phase-shift distribution and leads to fringing, that is, intensity oscillations around imaged objects, in TEM images. In this work, we have used focused-ion-beam milling to fabricate ZPPs with abrupt and graded thickness profiles around the centre hole. Depending on the thickness gradient and inner hole radius, graded-ZPP-TEM images of an aC/vacuum interface and bundles of carbon nanotubes (CNTs) show strongly reduced fringing. Image simulations were performed with ZPP-phase-shift distributions derived from measured thickness profiles of graded ZPPs, which show good agreement with the experimental images., Fringing artefacts, that is, intensity oscillations around imaged objects, are strongly reduced for Zernike phase plates with a graded thickness profile around the centre hole., Focused-ion-beam milling is used to fabricate graded Zernike phase plates with specific inner hole radius and thickness gradients., The phase-shift distribution is obtained from measured thickness profiles around the centre hole., Image simulations based on experimentally measured thickness/phase-shift distributions show good agreement with experimental Zernike phase-plate TEM images., The authors acknowledge funding of this project by the German Research Foundation (Deutsche Forschungsgemeinschaft) under contract Ge 841/26. This work is supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy – 2082/1–390761711 and by the Carl Zeiss Foundation. S.H. acknowledges funding from the German Research Foundation (HE 7675/1-1) and from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 889546., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalysts for the hydrogen evolution reaction in alkaline medium: Configuring a cooperative mechanism at the Ag-Ag2S-MoS2 interface

  • Bar-Hen, Avraham
  • Hettler, Simon
  • Ashwin, Ramasubramaniam
  • Arenal, Raúl
  • Bar-Ziv, Ronen
  • Bar-Sadan, Maya
Designing electrocatalysts for HER in alkaline conditions to overcome the sluggish kinetics associated with the additional water dissociation step is a recognized challenge in promoting the hydrogen economy. To this end, delicately tuning the atomic-scale structure and surface composition of nanoparticles is a common strategy and, specifically, making use of hybrid structures, can produce synergistic effects that lead to highly active catalysts. Here, we present a core-shell catalyst of Ag@MoS2 that shows promising results towards the hydrogen evolution reaction (HER) in both 0.5 M H2SO4 and 0.5 M KOH. In this hybrid structure, the MoS2 shell is strained and defective, and charge transfer occurs between the conductive core and the shell, contributing to the electrocatalytic activity. The shelling process results in a large fraction of Ag2S in the cores, and adjusting the relative fractions of Ag, Ag2S, and MoS2 leads to improved catalytic activity and fast charge-transfer kinetics. We suggest that the enhancement of alkaline HER is associated with a cooperative effect of the interfaces, where the Ag(I) sites in Ag2S drive the water dissociation step, and the formed hydrogen subsequently recombines on the defective MoS2 shell. This study demonstrates the benefits of hybrid structures as functional nanomaterials and provides a scheme to activate MoS2 for HER in alkaline conditions., This research was supported by the United States-Israel Binational Science Foundation (BSF), Jerusalem, Israel and the United States National Science Foundation (NSF) grant 2017642, and partly from the Israeli Atomic Energy Commission–Prof. A. Pazy joint foundation, ID126-2020. S.H. and R.A. acknowledge funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 889546 as well as from the Spanish MICINN (project grant PID2019-104739GB-100/AEI/10.13039/501100011033). R.A. also support the funding from the European Union H2020 program Graphene Flagship CORE3 (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotubes from ternary WS2(1- x)Se2 xalloys: Stoichiometry modulated tunable optical properties

  • Sreedhara, M. B.
  • Miroshnikov, Yana
  • Zheng, Kai
  • Houben, Lothar
  • Hettler, Simon
  • Arenal, Raúl
  • Pinkas, Iddo
  • Sinha, Sudarson S.
  • Castelli, Ivano E.
  • Tenne, Reshef
Nanotubes of transition metal dichalcogenides such as WS2 and MoS2 offer unique quasi-1D properties and numerous potential applications. Replacing sulfur by selenium would yield ternary WS2(1–x)Se2x (0 ≤ x ≤ 1; WSSe) nanotubes, which are expected to reveal strong modulation in their absorption edge as a function of selenium content, xSe. Solid WO2.72 oxide nanowhiskers were employed as a sacrificial template to gain a high yield of the nanotubes with a rather uniform size distribution. Though sulfur and selenium belong to the same period, their chemical reactivity with oxide nanowhiskers differed appreciably. Here, the closed ampoule technique was utilized to achieve the completion of the solid–vapor reaction in short time scales instead of the conventional flow reactor method. The structure and chemical composition of the nanotubes were analyzed in detail. X-ray and electron diffractions indicated a systematic modulation of the WSSe lattice upon increasing the selenium content. Detailed chemical mapping showed that the sulfur and selenium atoms are distributed in random positions on the anion lattice site of the nanotubes. The optical excitonic features and absorption edges of the WSSe nanotubes do not vary linearly with the composition xSe, which was further confirmed by density functional theory calculations. The WSSe nanotubes were shown to exhibit strong light–matter interactions forming exciton–polariton quasiparticles, which was corroborated by finite-difference time-domain simulations. Transient absorption analysis permitted following the excited state dynamics and elucidating the mechanism of the strong coupling. Thus, nanotubes of the ternary WSSe alloys offer strong band gap tunability, which would be useful for multispectral vision devices and other optoelectronic applications., The support of the Israel Science Foundation (grant no. 7130970101), Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging, the Perlman Family Foundation, and the Kimmel Center for Nanoscale Science (grant no. 43535000350000) is greatly acknowledged. K.Z. acknowledges China Scholarship Council (grant no. 2020008500162) for the research fellowship. I.P. is the encumbent of the Sharon Zuckerman research fellow chair. S.H. and R.A. acknowledge funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 889546, from the Spanish MICINN (project grant PID2019-104739GB-100/AEI/10.13039/501100011033), and from the Government of Aragon (project DGA E13-20R). R.A. acknowledges funding from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strontium-deficient SrxCoO2-CoO2 nanotubes as a high ampacity and high conductivity material

  • Roy, Kankona Singha
  • Hettler, Simon
  • Arenal, Raúl
  • Panchakarla, Leela S.
Continuous miniaturization of electronics demands the development of interconnectors with high ampacity and high conductivity, which conventional conductors such as copper and gold cannot offer. Here we report the synthesis of Sr-deficient misfit SrxCoO2–CoO2 nanotubes by a novel crystal conversion method and investigate their electrical properties. Bulk Sr6Co5O15 having a quasi-one-dimensional CoO6 polyhedral structure (face-sharing octahedron and trigonal prismatic CoO6 arranged in one-dimension) is converted to SrxCoO2–CoO2 nanotubes where CoO2 adopts a two-dimensional edge-sharing CoO2 layered structure in a basic hydrothermal process. Electrical properties measured on individual nanotubes demonstrate that these nanotubes are semiconducting with a conductivity of 1.28 × 104 S cm−1 and an ampacity of 109 A cm−2, which is the highest reported ampacity value to date of any inorganic oxide-based material. The nanotubes also show a breakdown power per unit channel length (P/L) of ∼38.3 W cm−1, the highest among the regularly used interconnect materials. The above results demonstrate that SrxCoO2–CoO2 nanotubes are potential building blocks for high-power electronic applications., Prof. L.S.P. would like to acknowledge Science and Engineering Research Board under the Department of Science and Technology (DST-SERB), Government of India for funding (EMR/2016/003594). K.S.R. acknowledges the Department of Chemistry, Department of Physics and Department of Materials Engineering and Materials Science, Indian Institute of Technology (IIT) Bombay and Industrial Research and Consultancy Center (IRCC), Sophisticated Analytical Instrument Facility (SAIF), Centre of Excellence in Nanoelectronics (CEN) IIT Bombay and Fund for Improvement of S&T Infrastructure (FIST) for all the facilities provided. K.S.R. sincerely thanks Gayatri Vaidya at IIT Bombay for helpful assistance and discussion about the fabrication process. S.H. and R.A. acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 889546 and from the Spanish MICINN (project grant PID2019-104739GB-100/AEI/10.13039/501100011033). R. A. acknowledges funding from the Government of Aragon (project DGA E13-20R) and European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room-temperature anomalous Hall effect in graphene in interfacial magnetic proximity to EuO grown by topotactic reduction

  • Pandey, Satakshi
  • Hettler, Simon
  • Arenal, Raúl
  • Bouillet, Corinne
  • Moghe, Aditi Raman
  • Berciaud, Stéphane
  • Robert, Jérôme
  • Dayen, Jean-François
  • Halley, David
We show that thin layers of EuO, a ferromagnetic insulator, can be achieved by topotactic reduction under titanium of a Eu2O3 film deposited on top of a graphene template. The reduction process leads to the formation of a 7-nm-thick EuO smooth layer, without noticeable structural changes in the underlying chemical vapor deposited graphene. The obtained EuO films exhibit ferromagnetism, with a Curie temperature that decreases with the initially deposited Eu2O3 layer thickness. By adjusting the thickness of the Eu2O3 layer below 7 nm, we promote the formation of EuO at the very graphene interface: the EuO/graphene heterostructure demonstrates the anomalous Hall effect (AHE), which is a fingerprint of proximity-induced spin polarization in graphene. The AHE signal moreover persists above Tc up to 350 K due to a robust super-paramagnetic phase in EuO. This original high-temperature magnetic phase is attributed to magnetic polarons in EuO: we propose that the high strain in our EuO films grown on graphene stabilizes the magnetic polarons up to room temperature. This effect is different from the case of bulk EuO in which polarons vanish in the vicinity of the Curie temperature Tc=69 K., R.A. and S.H. acknowledge funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 889546, by the Spanish MCIN (PID2019-104739GB100/AEI/10.13039/501100011033) and from the European Union H2020 programs “ESTEEM3” (Grant No. 823717) and “Graphene Flagship” CORE 3 (Grant No. 881603). This study was supported by French state funds managed by the ANR more specifically within the grants MixDferro (ANR-21-CE09-0029) and 2DSwitch (ANR-21-CE09-0031). J.F.D. also acknowledges financial support from the Institut Universitaire de France (Junior Chair)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tungsten oxide mediated quasi-van der Waals epitaxy of WS2on sapphire

  • Cohen, Assael
  • Mohapatra, Pranab K.
  • Hettler, Simon
  • Patsha, Avinash
  • Narayanachari, K. V. L. V.
  • Shekhter, Pini
  • Cavin, John
  • Rondinelli, James M.
  • Bedzyk, Michael
  • Dieguez, Oswaldo
  • Arenal, Raúl
  • Ismach, Ariel
Conventional epitaxy plays a crucial role in current state-of-the art semiconductor technology, as it provides a path for accurate control at the atomic scale of thin films and nanostructures, to be used as the building blocks in nanoelectronics, optoelectronics, sensors, etc. Four decades ago, the terms “van der Waals” (vdW) and “quasi-vdW (Q-vdW) epitaxy” were coined to explain the oriented growth of vdW layers on 2D and 3D substrates, respectively. The major difference with conventional epitaxy is the weaker interaction between the epi-layer and the epi-substrates. Indeed, research on Q-vdW epitaxial growth of transition metal dichalcogenides (TMDCs) has been intense, with oriented growth of atomically thin semiconductors on sapphire being one of the most studied systems. Nonetheless, there are some striking and not yet understood differences in the literature regarding the orientation registry between the epi-layers and epi-substrate and the interface chemistry. Here we study the growth of WS2 via a sequential exposure of the metal and the chalcogen precursors in a metal–organic chemical vapor deposition (MOCVD) system, introducing a metal-seeding step prior to the growth. The ability to control the delivery of the precursor made it possible to study the formation of a continuous and apparently ordered WO3 mono- or few-layer at the surface of a c-plane sapphire. Such an interfacial layer is shown to strongly influence the subsequent quasi-vdW epitaxial growth of the atomically thin semiconductor layers on sapphire. Hence, here we elucidate an epitaxial growth mechanism and demonstrate the robustness of the metal-seeding approach for the oriented formation of other TMDC layers. This work may enable the rational design of vdW and quasi-vdW epitaxial growth on different material systems., The authors gratefully acknowledge the very generous support from the Israel Science Foundation, Projects # 2171/17 (A.C., P.K.M., and O.D.), 2549/17 (A.P.), and 1784/15 (A.I.). S.H. and R.A. acknowledge funding from the European Unions’ H2020 research and innovation programme under Marie-Skłodowska Curie (Grant Agreement No. 889546), from the European Union H2020 program “ESTEEM3” (Grant Agreement No. 823717) as well as from the Spanish MICINN (Project Grant PID2019-104739GB-100/AEI/10.13039/501100011033) and from the Government of Aragon (Project DGA E13-20R). The TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain). A.I. and B.Z. acknowledge the support provided by the Crown Family Fund, Northwestern University. J.C. and J.M.R. were supported by the National Science Foundation (NSF) under Award Number DMR-2011208. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by NSF Grant Number ACI-1548562. This work made use of the XRD Facility at NU which has received support from the SHyNE Resource (NSF ECCS-2025633) and MRSEC program (NSF DMR-1720139)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and dynamics of PtSi nanoparticles on a carbon nanofilm by in-situ TEM Joule heating

  • Hettler, Simon
  • Arenal, Raúl
In-situ transmission electron microscopy has evolved to be a unique technique to study process dynamics down to the atomic scale. Here, we show that in-situ Joule heating of carbon nanofilms facilitates the investigation of the nucleation, annealing, diffusion and evaporation of PtSi nanoparticles in a controlled way. The nanoparticles form from Pt-based hydrocarbon molecules and silicon oxide present on the amorphous carbon nanofilm. The in-situ transmission electron microscopy approach permits shedding light on the interaction between the nanoparticles and the carbon support, crucial information when aiming for stable catalytic applications. The method is versatile, allows reaching very high temperatures and could be applied to study many different combinations of bimetallic and even multimetallic high-entropy alloy nanoparticles., The authors acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546 and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033) as well from the Gobierno de Aragón (DGA) under project E13-23R. The microscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotubes from lanthanide-based misfit-layered compounds: Understanding the growth, thermodynamic, and kinetic stability limits

  • Sreedhara, M. B.
  • Khadiev, Azat
  • Zheng, Kai
  • Hettler, Simon
  • Castelli, Ivano E.
  • Arenal, Raúl
  • Novikov, Dmitri
  • Tenne, Reshef
Gaining insights into the kinetics and the thermodynamic limits of nanostructures in high-temperature reactions is crucial for controlling their unique morphology, phase, and structure. Nanotubes from lanthanide-based misfit-layered compounds (MLCs) have been known for more than a decade and were successfully produced mostly via a chemical vapor transport protocol. The MLC nanotubes show diverse structural arrangements and lattice disorders, which could have a salient impact on their properties. Though their structure and charge transfer properties are reasonably well understood, a lack of information on their thermodynamic and kinetic stability limits their scalable synthesis and their applicability in modern technologies. In this study, the growth, thermodynamic stability, and decomposition kinetics of lanthanide-based misfit nanotubes of two model compounds, i.e., (LaS)1.14TaS2 and (SmS)1.19TaS2 are elucidated in detail. The nanotubes were carefully analyzed via atomic resolution electron microscopy imaging and synchrotron-based X-ray and electron diffraction techniques, and the information on their morphology, phase, and structures was deduced. The key insights gained would help to establish the parameters to explore their physio-chemical properties further. Furthermore, this study sheds light on the complex issue of the high-temperature stability of nanotubes and nanostructures in general., M.B.S. acknowledges the Indian Institute of Science for the support and start-up grant funding. R.T. acknowledges the support of The Estate of Manfred Hecht and the Estate of Diane Recanati. We are also grateful to the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging, the Perlman Family Foundation, and the Kimmel Center for Nanoscale Science of the Weizmann Institute and in particular Katya Rechav. Kai Zheng acknowledges the China Scholarship Council (grant no. 2020008500162) for the research fellowship. R.A. and S.H. acknowledge funding from the European Union’s Horizon 2020 research innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, by the Gobierno de Aragón (DGA) under project E13-23R and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033) and by the MICIU with funding from European NextGenerationEU (PRTR-C17.l1) promoted by the Government of Aragon. We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at DESY P23 “In-situ and X-ray imaging beamline”. Beamtime was allocated for proposal H-20010090., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Misfit layered compounds: Insights into chemical, kinetic, and thermodynamic stability of nanophases

  • Khadiev, Azat
  • Sreedhara, M. B.
  • Hettler, Simon
  • Novikov, Dmitri
  • Arenal, Raúl
  • Tenne, Reshef
[Conspectus] Compounds with layered structures (2D-materials), like transition metal-dichalcogenides (e.g., MoS2), attracted a great deal of interest in the scientific community in recent years. This interest can be attributed to their unique lamellar structure, which induces large anisotropy in their physicochemical properties. Furthermore, owing to the weak van der Waals interaction between the layers, they can be cleaved along the a-b plane, which allows fabricating single layers with physical properties entirely different from the bulk material. Moreover, stacking layers of different 2D-materials on top of each other has led to a wealth of new observations, for instance, by twisting two layers with respect to each other and producing Moiré lattice. Another outstanding property of inorganic layer compounds is their tendency to form nanotubes, reported first (for WS2) many years ago and subsequently from many other layered compounds.Among the 2D-materials, misfit layer compounds make a special class with an incommensurate and nonstoichiometric lattice made of an alternating layer with rocksalt structure, like LaS (O) and a layer with hexagonal structure, like TaS2 (T). The lack of lattice commensuration between the two slabs leads to a built-in strain, which can be relaxed via bending. Consequently, nanotubes have been produced from numerous MLC compounds over the past decade and their structure was elucidated.Owing to their large surface area, nanostructures are generally metastable and tend to recrystallize into microscopic crystallites via different mechanisms, like Ostwald ripening, or chemically decompose and then recrystallize. The stability of nanostructures at elevated temperatures has been investigated quite scarcely so far. In this perspective, electron microscopy as well as synchrotron-based X-ray absorption and reflection techniques were used to elucidate the chemical selectivity and decomposition routes of rare-earth based MLC nanotubes prepared at elevated temperatures (800-1200 °C).As for the chemical selectivity, entropic effects are expected to dictate the random distribution of the chalcogen atoms on the anion sites of the MLC nanotubes at elevated temperatures. Nonetheless, the sulfur atoms were found to bind exclusively to the rare-earth atom (Ln = La, Sm) of the rocksalt slab and the selenium to the tantalum of the hexagonal TX2 slab. This uncommon selectivity was not found in other kinds of nanotubes like WSe2xS2(1-x). In other series of experiments, the lack of utter symmetry in the multiwall nanotubes leads to exclusions of certain X-ray (0kl) reflections, which was used to distinguish them from the bulk crystallites. The transformation of Ln-based MLC nanotubes into microscopic flakes was followed as a function of the synthesis temperature (800-1200 °C) and the synthesis time (1-96 h). Furthermore, sequential high-temperature transformations of the (O-T) lattice into (O-T-T) and finally (O-T-T-T) phases via deintercalation of the LnS slab was observed. This autocatalytic process is reminiscent of the deintercalation of alkali atoms from different layered structure materials. Annealing at higher temperatures and for longer periods of time eventually leads to the decomposition of the ternary MLC into binary metal-sulfide phases, as well as partial oxidation of the product. This study sheds light on the complex mechanism of high-temperature chemical stability of the nanostructures., We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at DESY P23 “In-situ X-ray diffraction and imaging beamline”. Beamtime was allocated for proposal H-20010090 and I-20210786 EC. The authors thank Wolfgang Calibe and Aleksandr Kalinko from DESY P64 beamline for providing the Lambda Si detector and Yves Joly for the useful discussion on XAS and DAFS. M.B.S. acknowledges the Indian Institute of Science for the support and start-up grant funding. R.T. acknowledges the support of The Estate of Manfred Hecht and the Estate of Diane Recanati. We are also grateful to the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging, the Perlman Family Foundation, and the Kimmel Center for Nanoscale Science. R.A. and S.H. acknowledge funding from the European Union’s Horizon 2020 research innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, by the Gobierno de Aragón (DGA) under project E13-23R, as well as by the Spanish Ministry of Science, Innovation and Universities (MICIU) (PID2019-104739GB-100/AEI/10.13039/501100011033) and by the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish MICIU (CEX2023-001286-S MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable CoO2 nanoscrolls with outstanding electrical properties

  • Hettler, Simon
  • Roy, Kankona Singha
  • Arenal, Raúl
  • Panchakarla, Leela S.
This paper is dedicated to the memory of Professor Leela S. Panchakarla, dear supervisor (K.S.R) and colleague, outstanding scientist, who died prematurely., Layered CoO2 is of great interest for its promising properties but is meta-stable in its bulk form. CoO2 is synthesized by converting the quasi-1D crystal structure of bulk Ca3Co2O6 via a hydrothermal treatment. The resulting nanostructures are predominantly nanoscrolls with very thin walls, which exhibit long-term stability. A detailed structural investigation reveals that the CoO2 is found to crystallize in monoclinic form, similar to the related CaCoO2-CoO2 misfit structure. Individual nanoscrolls are characterized electrically and show a p-type semiconducting nature with a high current-carrying capacity of 4·105 A cm−2 and an extremely high breakdown voltage of up to 270 kV cm−1. The results demonstrate the possibility to stabilize meta-stable materials in low-dimensional forms and a promising application of the nanoscrolls as interconnect in high-voltage electronic circuitry., Dear late Prof. L.S.P. would like to acknowledge Science and Engineering Research Board under the Department of Science and Technology (DST-SERB), Government of India for funding (EMR/2016/003594). K.S.R. acknowledges the Department of Chemistry, Department of Physics and Department of Materials Engineering and Materials Science, Indian Institute of Technology (IIT) Bombay and Industrial Research and Consultancy Center (IRCC), Sophisticated Analytical Instrument Facility (SAIF), Centre of Excellence in Nanoelectronics (CEN) IIT Bombay and Fund for Improvement of S&T Infrastructure (FIST) for all the facilities provided. K.S.R. sincerely thanks Gayatri Vaidya at IIT Bombay for helpful assistance and discussion about the fabrication process. S.H. and R.A. acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska–Curie grant agreement No. 889546 and from the Spanish Ministry of Science, Innovation and Universities (MICIU) (project grant PID2019-104739GB-100/AEI/ 10.13039/501100011033). R.A. acknowledges funding from the Government of Aragon (project DGA E13-23R), from the European Union H2020 programs “ESTEEM3” (823717) and “Graphene Flagship” (881603) as well as from the Spanish MICIU by the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S MICIU/AEI/10.13039/501100011033). Most of the TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Support-based transfer and contacting of individual nanomaterials for In situ nanoscale investigations

  • Hettler, Simon
  • Furqan, Mohammad
  • Arenal, Raúl
Although in situ transmission electron microscopy (TEM) of nanomaterials has been gaining importance in recent years, difficulties in sample preparation have limited the number of studies on electrical properties. Here, a support-based preparation method of individual 1D and 2D materials is presented, which yields a reproducible sample transfer for electrical investigation by in situ TEM. A mechanically rigid support grid facilitates the transfer and contacting to in situ chips by focused ion beam with minimum damage and contamination. The transfer quality is assessed by exemplary specimens of different nanomaterials, including a monolayer of WS2. Possible studies concern the interplay between structural properties and electrical characteristics on the individual nanomaterial level as well as failure analysis under electrical current or studies of electromigration, Joule heating, and related effects. The TEM measurements can be enriched by additional correlative microscopy and spectroscopy carried out on the identical object with techniques that allow a characterization with a spatial resolution in the range of a few microns. Although developed for in situ TEM, the present transfer method is also applicable to transferring nanomaterials to similar chips for performing further studies or even for using them in potential electrical/optoelectronic/sensing devices., The authors acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, by the Spanish MCIN (PID2019-104739GB-100/AEI/10.13039/501100011033) and from the European Union H2020 programs “ESTEEM3” (Grant number 823717). The microscopy works were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward quantitative thermoelectric characterization of (nano)materials by in-situ transmission electron microscopy

  • Hettler, Simon
  • Furqan, Mohammad
  • Sotelo, Andres
  • Arenal, Raúl
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient across the studied materials, which are simultaneously measured electrically. A thermovoltage was induced in all studied devices, whose sign corresponds to the sign of the Seebeck coefficient of the tested materials. The results indicate that in-situ thermoelectric TEM studies can help to profoundly understand fundamental aspects of thermoelectricity, which is exemplary demonstrated by tracking the thermovoltage during in-situ crystallization of an amorphous Ge thin film. We propose an improved in-situ TEM microchip design, which should facilitate a full quantitative measurement of the induced temperature gradient, the electrical and thermal conductivities, as well as the Seebeck coefficient. The benefit of the in-situ approach is the possibility to directly correlate the thermoelectric properties with the structure and chemical composition of the entire studied device down to the atomic level, including grain boundaries, dopants or crystal defects, and to trace its dynamic evolution upon heating or during the application of electrical currents., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, the Government of Aragon (DGA) through the project E13_23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI 10.13039/501100011033). The microscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. Sample courtesy (MLC NT) from MB Sreedhara and R. Tenne (MLC NT, Weizmann Institute of Science, Israel) is acknowledged. The authors thank M. Rengifo (INMA, CSIC-Universidad de Zaragoza) for discussions about electrical characterizations, P. Strichovanek (INMA, CSIC-Universidad de Zaragoza) for Ti-Pt sputter deposition, R. Valero (LMA, Universidad de Zaragoza) for support with MEMS and Ge thin-film fabrication and N. Navascues (INMA, CSIC-Universidad de Zaragoza) for support with Raman acquisition., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proximity-mediated multi-ferroelectric coupling in highly strained EuO-graphene heterostructures

  • Pandey, Satakshi
  • Pin, Thomas
  • Hettler, Simon
  • Arenal, Raúl
  • Bouillet, Corinne
  • Maroutian, Thomas
  • Robert, Jérôme
  • Gobaut, Benoit
  • Kundys, Bohdan
  • Dayen, Jean-François
  • Halley, David
2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin-dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity-controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm-2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain-induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto-electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices., The authors thank the STnano clean room facility and the XRD platform of IPCMS for technical support as well as the Labex NIE for partial support. R.A. and S.H. acknowledge funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement number 889546, the Government of Aragon (DGA) through the project E13 23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033). This study was supported by French state funds managed by the ANR more specifically within the grants MixDferro (ANR-21-CE09-0029) and 2DSwitch (ANR-21-CE09-0031). J.-F.D. also acknowledges a Junior grant from Institut Universitaire de France., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the decomposition pathways of LaS-TaS2 misfit-layered compound nanostructures under extreme electrical currents by in situ TEM

  • Hettler, Simon
  • Sreedhara, M. B.
  • Tenne, Reshef
  • Arenal, Raúl
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors., SH and RA acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, from the Spanish MICIU ((PID2023-151080NB-I00/AEI/10.13039/501100011033), from the Spanish MICIU with funding from European Union Next Generation EU(PRTR-C17.I1) promoted by the Government of Aragon as well as from the “Severo Ochoa” Programme for Centres of 758 Excellence in R&D of the Spanish MICIU (CEX2023-759 001286-S MICIU/AEI/10.13039/501100011033) and the Government of Aragon (DGA) through the project E13 23R. RT acknowledges the support of the Estate of Manfred Hecht and the Estate of Diane Recanati and the Perlman family foundation. The microscopy and spectroscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. The authors thank I. Echaniz and N. Navascuez (INMA) for help with Raman spectra acquisition., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically-linked heterostructures of palladium nanosheets and 2H-MoS2

  • Quirós‐Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gómez, Andrés
  • Arenal, Raúl
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
Special Section: EMRS 2024 ‐ Chemical Functionalization of 2D Materials., The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well-defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H-MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently-linked Pd nanosheet (PdNS)/functionalized MoS2 (f-MoS2) heterostructure is introduced, leveraging PdNS infrared-absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f-MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f-MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed-dimensional heterostructures., V.S. acknowledged funding from Project Nos. PID2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR). Authors would like to acknowledge Prof. Enrique Canovas for a fruitful discussion. Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.V.-M. acknowledges grants No. TED2021-131906A-100 and No. RYC2022-035200-I funded by Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.B. acknowledged Marie Skłodowska-Curie Actions programme MSCA-IF-2020-101030872. J.C.-G. acknowledged the MICINN-FEDER (No. PID2021-128313OB-I00), and support from the Regional Government of Madrid (NMAT2D-CM). J.C.G. also acknowledged a Research Consolidation Grant (No. CNS2022-36191 and PDC202-314587-1I00) from the Spanish Ministry of Science and Innovation. A.C.G. acknowledged funding from the Spanish Ministry of Science, Innovation and Universities (Grant Nos. TED2021-132267B-I00, PID2020-115566RB-I00, and PDC2023-145920-I00) and the EU FLAG-ERA project To2Dox (No. JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM project (No. Y2020/NMT-6661). IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (No. CEX2020-001039-S). INMA, CSIC-Universidad, researchers acknowledge support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (No. MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033). Authors also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa,” with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. R.A. and S.H. acknowledged funding from European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 889546, from the Gobierno de Aragón (DGA) under Project E13-23R, by the Spanish MICIU (No. PID2019-104739GB-100/AEI/10.13039/501100011033 and PID202-3151080N-BI00/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (No. PRTR-C17.I1) promoted by the Government of Aragon. The SEM and (S)TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical and electrical properties of a nano-gap or how to play the nano-accordion

  • Hettler, Simon
  • Arenal, Raúl
[Data availability statement] The data that support the findings of this study are openly available at the following URL/DOI:https://doi.org/10.5281/zenodo.17549328., In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar in-situ TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m−1. These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 889546 and by the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon as well as from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and the Government of Aragon (DGA) through the Project E-13 23 R. Sample courtesy from A. Sotelo (INMA, Universidad de Zaragoza). The microscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon-film-based Zernike phase plates with smooth thickness gradient for phase-contrast transmission electron microscopy with reduced fringing artefacts

  • Obermair, M.
  • Hettler, S.
  • Dries, M.
  • Hugenschmidt, M.
  • Spiecker, R.
  • Gerthsen, D.
Phase plates (PPs) in transmission electron microscopy (TEM) improve the contrast of weakly scattering objects under in-focus imaging conditions. A well-established PP type is the Zernike (Z)PP, which consists of a thin amorphous carbon (aC) film with a microscaled hole in the centre. The mean inner potential of the aC film is exploited to shift the phase of the scattered electrons while the unscattered electrons in the zero-order beam propagate through the hole and remain unaffected. However, the abrupt thickness increase at the hole edge induces an abrupt change of the phase-shift distribution and leads to fringing, that is, intensity oscillations around imaged objects, in TEM images. In this work, we have used focused-ion-beam milling to fabricate ZPPs with abrupt and graded thickness profiles around the centre hole. Depending on the thickness gradient and inner hole radius, graded-ZPP-TEM images of an aC/vacuum interface and bundles of carbon nanotubes (CNTs) show strongly reduced fringing. Image simulations were performed with ZPP-phase-shift distributions derived from measured thickness profiles of graded ZPPs, which show good agreement with the experimental images. Fringing artefacts, that is, intensity oscillations around imaged objects, are strongly reduced for Zernike phase plates with a graded thickness profile around the centre hole. Focused-ion-beam milling is used to fabricate graded Zernike phase plates with specific inner hole radius and thickness gradients. The phase-shift distribution is obtained from measured thickness profiles around the centre hole. Image simulations based on experimentally measured thickness/phase-shift distributions show good agreement with experimental Zernike phase-plate TEM images.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aberration-corrected transmission electron microscopy with Zernike phase plates

  • Hettler, S.
  • Arenal, R.
We explore the possibility of applying physical phase plates (PPs) in combination with aberration-corrected transmission electron microscopy. Phase-contrast transfer characteristics are calculated and compared for a thin-film based Zernike PP, a hole-free (HF) or Volta PP and an electrostatic Zach PP, considering their phase-shifting properties in combination with partial spatial coherence. The effect of slightly converging illumination conditions, often used in high-resolution applications, on imaging with PPs is discussed. Experiments with an unheated Zernike PP applied to various nanomaterial specimens and a qualitative analysis clearly demonstrates the general compatibility of PPs and aberration-corrected transmission electron microscopy. Calculations and experiments show the benefits of the approach, among which is a strong phase-contrast enhancement of a large range of spatial frequencies. This allows the simultaneous imaging of atomic-resolution structures and morphological features at the nanometer scale, with maximum phase contrast. The calculations can explain why the HFPP damps contrast transfer at higher spatial frequencies. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanotubes from Ternary WS2(1- x)Se2 xAlloys: Stoichiometry Modulated Tunable Optical Properties

  • Sreedhara, M. B.
  • Miroshnikov, Yana
  • Zheng, Kai
  • Houben, Lothar
  • Hettler, Simon
  • Arenal, Raul
  • Pinkas, Ido
  • Sinha, Sudarson S.
  • Castelli, Ivano E.
  • Tenne, Reshef
Nanotubes of transition metal dichalcogenides such as WS2 and MoS2 offer unique quasi-1D properties and numerous potential applications. Replacing sulfur by selenium would yield ternary WS2(1-x)Se2x (0 = x = 1; WSSe) nanotubes, which are expected to reveal strong modulation in their absorption edge as a function of selenium content, xSe. Solid WO2.72 oxide nanowhiskers were employed as a sacrificial template to gain a high yield of the nanotubes with a rather uniform size distribution. Though sulfur and selenium belong to the same period, their chemical reactivity with oxide nanowhiskers differed appreciably. Here, the closed ampoule technique was utilized to achieve the completion of the solid-vapor reaction in short time scales instead of the conventional flow reactor method. The structure and chemical composition of the nanotubes were analyzed in detail. X-ray and electron diffractions indicated a systematic modulation of the WSSe lattice upon increasing the selenium content. Detailed chemical mapping showed that the sulfur and selenium atoms are distributed in random positions on the anion lattice site of the nanotubes. The optical excitonic features and absorption edges of the WSSe nanotubes do not vary linearly with the composition xSe, which was further confirmed by density functional theory calculations. The WSSe nanotubes were shown to exhibit strong light-matter interactions forming exciton-polariton quasiparticles, which was corroborated by finite-difference time-domain simulations. Transient absorption analysis permitted following the excited state dynamics and elucidating the mechanism of the strong coupling. Thus, nanotubes of the ternary WSSe alloys offer strong band gap tunability, which would be useful for multispectral vision devices and other optoelectronic applications. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tungsten oxide mediated quasi-van der Waals Epitaxy of WS2 on Sapphire

  • Cohen, Assael
  • Mohapatra, Pranab K.
  • Hettler, Simon
  • Patsha, Avinash
  • Narayanachari, K. V. L. V.
  • Shekhter, Pini
  • Cavin, John
  • Rondinelli, James M.
  • Bedzyk, Michael
  • Dieguez, Oswaldo
  • Arenal, Raul
  • Ismach, Ariel
Conventional epitaxy plays a crucial role in current state-of-the art semiconductor technology, as it provides a path for accurate control at the atomic scale of thin films and nanostructures, to be used as the building blocks in nanoelectronics, optoelectronics, sensors, etc. Four decades ago, the terms “van der Waals” (vdW) and “quasi-vdW (Q-vdW) epitaxy” were coined to explain the oriented growth of vdW layers on 2D and 3D substrates, respectively. The major difference with conventional epitaxy is the weaker interaction between the epi-layer and the epi-substrates. Indeed, research on Q-vdW epitaxial growth of transition metal dichalcogenides (TMDCs) has been intense, with oriented growth of atomically thin semiconductors on sapphire being one of the most studied systems. Nonetheless, there are some striking and not yet understood differences in the literature regarding the orientation registry between the epi-layers and epi-substrate and the interface chemistry. Here we study the growth of WS2 via a sequential exposure of the metal and the chalcogen precursors in a metal–organic chemical vapor deposition (MOCVD) system, introducing a metal-seeding step prior to the growth. The ability to control the delivery of the precursor made it possible to study the formation of a continuous and apparently ordered WO3 mono- or few-layer at the surface of a c-plane sapphire. Such an interfacial layer is shown to strongly influence the subsequent quasi-vdW epitaxial growth of the atomically thin semiconductor layers on sapphire. Hence, here we elucidate an epitaxial growth mechanism and demonstrate the robustness of the metal-seeding approach for the oriented formation of other TMDC layers. This work may enable the rational design of vdW and quasi-vdW epitaxial growth on different material systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strontium-deficient SrxCoO2-CoO2 nanotubes as a high ampacity and high conductivity material

  • Roy, Kankona Singha
  • Hettler, Simon
  • Arenal, Raul
  • Panchakarla, Leela S.
Continuous miniaturization of electronics demands the development of interconnectors with high ampacity and high conductivity, which conventional conductors such as copper and gold cannot offer. Here we report the synthesis of Sr-deficient misfit SrxCoO2-CoO2 nanotubes by a novel crystal conversion method and investigate their electrical properties. Bulk Sr6Co5O15 having a quasi-one-dimensional CoO6 polyhedral structure (face-sharing octahedron and trigonal prismatic CoO6 arranged in one-dimension) is converted to SrxCoO2-CoO2 nanotubes where CoO2 adopts a two-dimensional edge-sharing CoO2 layered structure in a basic hydrothermal process. Electrical properties measured on individual nanotubes demonstrate that these nanotubes are semiconducting with a conductivity of 1.28 x 10(4) S cm(-1) and an ampacity of 10(9) A cm(-2), which is the highest reported ampacity value to date of any inorganic oxide-based material. The nanotubes also show a breakdown power per unit channel length (P/L) of similar to 38.3 W cm(-1), the highest among the regularly used interconnect materials. The above results demonstrate that SrxCoO2-CoO2 nanotubes are potential building blocks for high-power electronic applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Room-temperature anomalous Hall effect in graphene in interfacial magnetic proximity to EuO grown by topotactic reduction

  • Pandey, Satakshi
  • Hettler, Simon
  • Arenal, Raul
  • Bouillet, Corinne
  • Moghe, Aditi Raman
  • Berciaud, Stéphane
  • Robert, Jérôme
  • Dayen, Jean-François
  • Halley, David
We show that thin layers of EuO, a ferromagnetic insulator, can be achieved by topotactic reduction under titanium of a Eu<sub>2O<sub>3 film deposited on top of a graphene template. The reduction process leads to the formation of a 7-nm-thick EuO smooth layer, without noticeable structural changes in the underlying chemical vapor deposited graphene. The obtained EuO films exhibit ferromagnetism, with a Curie temperature that decreases with the initially deposited Eu<sub>O<sub>3 layer thickness. By adjusting the thickness of the Eu<sub>2O<sub>3 layer below 7 nm, we promote the formation of EuO at the very graphene interface: the EuO/graphene heterostructure demonstrates the anomalous Hall effect (AHE), which is a fingerprint of proximity-induced spin polarization in graphene. The AHE signal moreover persists above T<sub>c up to 350 K due to a robust super-paramagnetic phase in EuO. This original high-temperature magnetic phase is attributed to magnetic polarons in EuO: we propose that the high strain in our EuO films grown on graphene stabilizes the magnetic polarons up to room temperature. This effect is different from the case of bulk EuO in which polarons vanish in the vicinity of the Curie temperature T<sub>c=69K.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Support-based transfer and contacting of individual nanomaterials for In situ nanoscale investigations

  • Hettler, Simon
  • Furqan, Mohammad
  • Arenal, Raúl
Although in situ transmission electron microscopy (TEM) of nanomaterials has been gaining importance in recent years, difficulties in sample preparation have limited the number of studies on electrical properties. Here, a support‐based preparation method of individual 1D and 2D materials is presented, which yields a reproducible sample transfer for electrical investigation by in situ TEM. A mechanically rigid support grid facilitates the transfer and contacting to in situ chips by focused ion beam with minimum damage and contamination. The transfer quality is assessed by exemplary specimens of different nanomaterials, including a monolayer of WS2. Possible studies concern the interplay between structural properties and electrical characteristics on the individual nanomaterial level as well as failure analysis under electrical current or studies of electromigration, Joule heating, and related effects. The TEM measurements can be enriched by additional correlative microscopy and spectroscopy carried out on the identical object with techniques that allow a characterization with a spatial resolution in the range of a few microns. Although developed for in situ TEM, the present transfer method is also applicable to transferring nanomaterials to similar chips for performing further studies or even for using them in potential electrical/optoelectronic/sensing devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis and dynamics of PtSi nanoparticles on a carbon nanofilm by in-situ TEM Joule heating

  • Hettler, Simon
  • Arenal, Raúl
In-situ transmission electron microscopy has evolved to be a unique technique to study process dynamics down to the atomic scale. Here, we show that in-situ Joule heating of carbon nanofilms facilitates the investigation of the nucleation, annealing, diffusion and evaporation of PtSi nanoparticles in a controlled way. The nanoparticles form from Pt-based hydrocarbon molecules and silicon oxide present on the amorphous carbon nanofilm. The in-situ transmission electron microscopy approach permits shedding light on the interaction between the nanoparticles and the carbon support, crucial information when aiming for stable catalytic applications. The method is versatile, allows reaching very high temperatures and could be applied to study many different combinations of bimetallic and even multimetallic high-entropy alloy nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanotubes from Lanthanide-Based Misfit-Layered Compounds: Understanding the Growth, Thermodynamic, and Kinetic Stability Limits

  • Sreedhara, M. B.
  • Khadiev, Azat
  • Zheng, Kai
  • Hettler, Simon
  • Serra, Marco
  • Castelli, Ivano E.
  • Arenal, Raul
  • Novikov, Dmitri
  • Tenne, Reshef
Gaining insights into the kinetics and the thermodynamic limits of nanostructures in high-temperature reactions is crucial for controlling their unique morphology, phase, and structure. Nanotubes from lanthanide-based misfit-layered compounds (MLCs) have been known for more than a decade and were successfully produced mostly via a chemical vapor transport protocol. The MLC nanotubes show diverse structural arrangements and lattice disorders, which could have a salient impact on their properties. Though their structure and charge transfer properties are reasonably well understood, a lack of information on their thermodynamic and kinetic stability limits their scalable synthesis and their applicability in modern technologies. In this study, the growth, thermodynamic stability, and decomposition kinetics of lanthanide-based misfit nanotubes of two model compounds, i.e., (LaS)1.14TaS2 and (SmS)1.19TaS2 are elucidated in detail. The nanotubes were carefully analyzed via atomic resolution electron microscopy imaging and synchrotron-based X-ray and electron diffraction techniques, and the information on their morphology, phase, and structures was deduced. The key insights gained would help to establish the parameters to explore their physio-chemical properties further. Furthermore, this study sheds light on the complex issue of the high-temperature stability of nanotubes and nanostructures in general.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stable CoO2 nanoscrolls with outstanding electrical properties

  • Hettler, Simon
  • Roy, Kankona Singha
  • Arenal, Raúl
  • Panchakarla, Leela S.
Layered CoO2 is of great interest for its promising properties but is meta‐stable in its bulk form. CoO2 is synthesized by converting the quasi‐1D crystal structure of bulk Ca3Co2O6 via a hydrothermal treatment. The resulting nanostructures are predominantly nanoscrolls with very thin walls, which exhibit long‐term stability. A detailed structural investigation reveals that the CoO2 is found to crystallize in monoclinic form, similar to the related CaCoO2‐CoO2 misfit structure. Individual nanoscrolls are characterized electrically and show a p‐type semiconducting nature with a high current‐carrying capacity of 4·105 A cm−2 and an extremely high breakdown voltage of up to 270 kV cm−1. The results demonstrate the possibility to stabilize meta‐stable materials in low‐dimensional forms and a promising application of the nanoscrolls as interconnect in high‐voltage electronic circuitry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Toward quantitative thermoelectric characterization of (nano)materials by in-situ transmission electron microscopy

  • Hettler, Simon
  • Furqan, Mohammad
  • Sotelo, Andrés
  • Arenal, Raul
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient across the studied materials, which are simultaneously measured electrically. A thermovoltage was induced in all studied devices, whose sign corresponds to the sign of the Seebeck coefficient of the tested materials. The results indicate that in-situ thermoelectric TEM studies can help to profoundly understand fundamental aspects of thermoelectricity, which is exemplary demonstrated by tracking the thermovoltage during in-situ crystallization of an amorphous Ge thin film. We propose an improved in-situ TEM microchip design, which should facilitate a full quantitative measurement of the induced temperature gradient, the electrical and thermal conductivities, as well as the Seebeck coefficient. The benefit of the in-situ approach is the possibility to directly correlate the thermoelectric properties with the structure and chemical composition of the entire studied device down to the atomic level, including grain boundaries, dopants or crystal defects, and to trace its dynamic evolution upon heating or during the application of electrical currents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Misfit layered compounds: insights into chemical, kinetic, and thermodynamic stability of nanophases

  • Khadiev, Azat
  • Sreedhara, M. B.
  • Hettler, Simon
  • Novikov, Dmitri
  • Arenal, Raul
  • Tenne, Reshef
Compounds with layered structures (2D-materials), like transition metal-dichalcogenides (e.g., MoS2), attracted a great deal of interest in the scientific community in recent years...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemically-Linked Heterostructures of Palladium Nanosheets and 2H-MoS2

  • Quirós-Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gomez, Andrés
  • Arenal, Raul
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastian, Víctor
The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well‐defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H‐MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently‐linked Pd nanosheet (PdNS)/functionalized MoS2 (f‐MoS2) heterostructure is introduced, leveraging PdNS infrared‐absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f‐MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f‐MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed‐dimensional heterostructures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Proximity‐Mediated Multi‐Ferroelectric Coupling in Highly Strained EuO‐Graphene Heterostructures

  • Pandey, Satakshi
  • Pin, Thomas
  • Hettler, Simon
  • Arenal, Raul
  • Bouillet, Corinne
  • Maroutian, Thomas
  • Robert, Jérôme
  • Gobaut, Benoit
  • Kundys, Bohdan
  • Dayen, Jean-François
  • Halley, David
2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin-dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity-controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm−2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain-induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto-electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unraveling the Decomposition Pathways of LaS-TaS<sub>2</sub> Misfit-Layered Compound Nanostructures under Extreme Electrical Currents by In Situ TEM

  • Hettler, Simon
  • Sreedhara, MB
  • Tenne, Reshef
  • Arenal, Raúl
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanical and electrical properties of a nano-gap or how to play the nano-accordion

  • Hettler, Simon
  • Arenal, Raul
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar insitu TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m−1 . These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.