Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulation of the Superconducting Phase Transition in Multilayer 2H-NbSe2 Induced by Uniform Biaxial Compressive Strain

  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Li, Hao
  • Elvira, Daniel
  • Calvo, M. Reyes
  • Castellanos-Gomez, Andres
Strain is a powerful tool for tuning the properties of two-dimensional materials. Here, we investigated the effects of large, uniform biaxial compressive strain on the superconducting phase transition of multilayered 2H-NbSe2 flakes. We observed a consistent decrease in the critical temperature of NbSe2 flakes induced by the large thermal compression of a polymeric substrate (>1.2%) at cryogenic temperatures. For thin flakes (∼10 nm thick), a strong modulation of the critical temperature up to 1.5 K is observed, which monotonically decreases with increasing flake thickness. The effects of biaxial compressive strain remain significant even for relatively thick samples up to 80 nm thick, indicating efficient transfer of strain not only from the substrate to the flakes but also across several van der Waals layers. This work demonstrates that compressive strain induced from substrate thermal deformation can effectively tune phase transitions at low temperatures in 2D materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Large Biaxial Compressive Strain Tuning of Neutral and Charged Excitons in Single-Layer Transition Metal Dichalcogenides

  • Henríquez-Guerra, Eudomar
  • Li, Hao
  • Pasqués-Gramage, Pablo
  • Gosálbez-Martínez, Daniel
  • D’Agosta, Roberto
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
  • Pasqués-Gramage, Pablo|||/items/dc3f3ba2-2b1e-4cfa-9301-2f520e57bdd9
The absorption and emission of light in single-layer transition metal dichalcogenides are governed by the formation of excitonic quasiparticles. Strain provides a powerful technique to tune the optoelectronic properties of two-dimensional materials and thus to adjust their exciton energies. The effects of large compressive strain in the optical spectrum of two-dimensional (2D) semiconductors remain rather unexplored compared to those of tensile strain, mainly due to experimental constraints. Here, we induced large, uniform, biaxial compressive strain (∼1.2%) by cooling, down to 10 K, single-layer WS2, MoS2, WSe2, and MoSe2 deposited on polycarbonate substrates. We observed a significant strain-induced modulation of neutral exciton energies, with blue shifts up to 160 meV, larger than in any previous experiments. Our results indicate a remarkably efficient transfer of compressive strain, demonstrated by gauge factor values exceeding previous results and approaching theoretical expectations. At low temperatures, we investigated the effect of compressive strain on the resonances associated with the formation of charged excitons. In WS2, a notable reduction of gauge factors for charged compared to neutral excitons suggests an increase in their binding energy, which likely results from the effects of strain added to the influence of the polymeric substrate.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Cost Shadow Mask Fabrication for Nanoelectronics

  • Pucher, Thomas
  • Bastante, Pablo
  • Sánchez Viso, Estrella
  • Castellanos-Gómez, Andrés
We present two approaches for fabricating shadow masks for the evaporation of electrodes onto nanomaterials. In the first one, we combine the use of a commercial fiber laser engraving system with readily available aluminum foil. This method is suitable for fabricating shadow masks with line widths of 50 µm and minimum feature separation of 20 µm, and using it to create masks with complex patterns is very straightforward. In the second approach, we use a commercially available vinyl cutting machine to pattern a vinyl stencil mask, and we use a glass fiber to define the separation between the electrodes. With this approach, we achieve well-defined electrodes separated by 15 µm, but this technique is less versatile in creating complex masks as compared with the laser-based one. We demonstrate the potential of these techniques by fabricating field-effect transistor devices based on MoS2. Our approach is a cost-effective and easily accessible method for fabricating shadow masks with high resolution and accuracy, making it accessible to a wider range of laboratories., This research was funded by the European Research Council (ERC) through the project grant agreement n° 755655; the Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00 and TED2021-132267B-I00; the Horizon 2020 FLAG-ERA through the project To2Dox (JTC-2019-009); and Comunidad de Madrid through the project CAIRO-CM (Y2020/NMT-6661)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Electrostatic Control of Excitonic Features in MoS2 by a Free-Standing Ultrahigh-κ Ferroelectric Perovskite

  • Pucher, Thomas
  • Puebla, Sergio
  • Zamora, V.
  • Sánchez Viso, Estrella
  • Rouco, V.
  • Leon, C.
  • García-Hernández, Mar
  • Santamaria, J.
  • Munuera, C.
  • Castellanos-Gómez, Andrés
Integrating free-standing complex oxides with two-dimensional (2D) materials has recently attracted great interest, due to the rich physics evolving from such structures. Enhancing and tuning the opto–electronic properties of these systems is of high importance for a multitude of applications, such as sensors, memory devices or optical communications. The electrostatic control of photoluminescence of monolayer MoS2 at room temperature via integration of free-standing BaTiO3 (BTO), a ferroelectric perovskite oxide is presented. It is shown that the use of BTO leads to highly tunable exciton emission of MoS2 in a minimal range of gate voltages. Due to BTO's ferroelectric polarization-induced doping, large peak emission shifts as well as a large and tunable A trion binding energy in the range of 40–100 meV are observed. These measurements are compared with those carried out when the BTO is replaced by a hexagonal boron nitride (hBN) dielectric layer, confirming BTO's superior gating properties and thus lower power consumption. Additionally, advantage of the ferroelectric switching of BTO is taken by fabricating devices where the BTO layer is decoupled from the gate electrode with a SiO2 layer. Choosing to isolate the BTO allows to induce large remanent behavior of MoS2’s excitonic features. © 2024 The Author(s). Advanced Functional Materials published by Wiley-VCH GmbH., The authors acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009), the Comunidad de Madrid through (MAD2D-CM)- UCM project, and the CAIRO-CM project (Y2020/NMT-6661) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RBI00, PID2020-118078RB-I00, RTI2018-099054-J-I00, IJC2018-038164-I, TED2021-132267B-I00, TED2021-130196B-C21, PRE2018-084818 and PDC2023-145920-I00). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Short-wave infrared photocurrent spectroscopy to probe narrow-gap 2D materials

  • Pucher, Thomas
  • Bastante, Pablo
  • Xie, Yong
  • Castellanos-Gómez, Andrés
The capability of characterizing low-bandgap two-dimensional (2D) materials is crucial for a wide range of applications from fundamental science to commercial implementation. Current techniques rely heavily on expensive characterization equipment and thus hinder focused research on low-bandgap materials, compared to their counterparts in the visible range of the electromagnetic spectrum. This work demonstrates a cost-efficient and easily rebuildable optical setup to probe low-bandgap 2D materials using photocurrent spectroscopy. The heart of the setup consists of a supercontinuum laser in combination with a diffraction grating to create a tunable light source working from 500 to 2000 nm, allowing to access bandgaps in the short-wave infrared (IR), far from what is possible using standard silicon detector technology. Apart from a complete technical guide to facilitate reproduction of the system, two popular narrow-gap materials (MoTe<inf>2</inf> and black phosphorus) have been studied to extract bandgaps and excitonic features of these materials. The results highlight the simple, yet powerful approach of utilizing photocurrent spectroscopy in the IR and thus expanding the analysis toolbox for narrow-gap 2D semiconductor research., We acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00, CEX2018-000805-M-19-2 and PDC2023-145920-I00). This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (Grant No. SITP-NLIST-ZD-2024-01)., The data that support the findings of this study are openly available at the following URL/DOI: https://zenodo.org/communities/2dfoundry/records., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced strain transfer and optoelectronic performance in MoS2 devices via Formvar encapsulation

  • Vladimirov, Simeon N.
  • Cakiroglu, Onur
  • Munuera, C.
  • Castellanos-Gómez, Andrés
  • Vasconcelos, Thiago L.
4 figures, We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ∼−50 meV/%) and 6-fold (up to ∼−1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime., The Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00 and PID2023-151946OB-I00. The authors also acknowledge funding from the Comunidad de Madrid through the CAIRO-CM Project (Y2020/NMT-6661), European Union’s Horizon 2020 research and innovation program under the Grant Agreement 956813 (2Exciting) and European Research Council (ERC) through the project ERC-PoC 2024 project StEnSo (grant agreement no. 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Air-stable, aluminium oxide encapsulated graphene phototransistors

  • Rojas Castiglione, T.
  • Pucher, Thomas
  • Dockx, K.
  • Aburto Contreras, G.
  • Sanz Biava, D.
  • Briceño Elchiver, B.
  • Buscema, M.
  • Castellanos-Gómez, Andrés
  • van der Zant, H.
  • Dulić, D.
Graphene has garnered significant interest in optoelectronics due to its unique properties, including broad wavelength absorption and high mobility. However, its weak stability in ambient conditions requires encapsulation for practical applications. In this study, we investigate graphene CVD-grown field-effect transistors fabricated on Si/SiO2 wafers, encapsulated with aluminum oxide ( Al2O3 ) of different thicknesses. We measure and analyze their optoelectronic response across wavelengths from near-ultraviolet to near-infrared. We find that, while having a negligible role in the photogating process, the Al 2 O 3 layer leads to stable and reproducible transferring curves operating in ambient conditions for over a month, with stable responsivities up to 1.5 A W − 1 at the shortest wavelength. Moreover, the transferring curves are stable at elevated temperatures up to 107°C . We also show that the sample performance can be tuned by changing the thickness of the SiO2 and Al 2 O 3 layer which brings further perspectives in developing robust sample technologies, especially in the ultraviolet region where the responsivity increases. Aluminum oxide encapsulated graphene-based photodetectors can thus be interesting for applications in air and at elevated temperatures. © 2024 The Author(s). Published by IOP Publishing Ltd., D D acknowledges financial support from ANID Fondecyt 1220984, Fondequip EQM140055, and EQM180009, and ANILLO ATE220057. D S is supported by ANID-Subdirección de Capital Humano/Magíster Nacional/2024-22241761 master’s scholarship. T P and A C G acknowledge funding from the EU FLAG-ERA Project To2Dox (JTC-2019-009) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00 and PDC2023-145920-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Engineering of Magnetoresistance and Magnetic Anisotropy in CrSBr

  • Henríquez-Guerra, E.
  • Ruiz, A.M.
  • Galbiati, M.
  • Cortés-Flores, Á.
  • Brown, D.
  • Zamora-Amo, Esteban
  • Almonte, L.
  • Shumilin, A.
  • Salvador-Sánchez, J.
  • Pérez-Rodríguez, A.
  • Orue, I.
  • Cantarero, A.
  • Castellanos-Gómez, Andrés
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Navarro-Moratalla, E.
  • Diez, E.
  • Amado, M.
  • Baldoví, J.J.
  • Calvo, M.R.
Tailoring magnetoresistance and magnetic anisotropy in van der Waals magnetic materials is essential for advancing their integration into technological applications. In this regard, strain engineering has emerged as a powerful and versatile strategy to control magnetism at the 2D limit. Here, it is demonstrated that compressive biaxial strain significantly enhances the magnetoresistance and magnetic anisotropy of few-layer CrSBr flakes. Strain is efficiently transferred to the flakes from the thermal compression of a polymeric substrate upon cooling, as confirmed by temperature-dependent Raman spectroscopy. This strain induces a remarkable increase in the magnetoresistance ratio and in the saturation fields required to align the magnetization of CrSBr along each of its three crystalographic directions, reaching a twofold enhancement along the magnetic easy axis. This enhancement is accompanied by a subtle reduction of the Néel temperature by ≈10 K. The experimental results are fully supported by first-principles calculations, which link the observed effects to a strain-driven modification in interlayer exchange coupling and magnetic anisotropy energy. These findings establish strain engineering as a key tool for fine-tuning magnetotransport properties in 2D magnetic semiconductors, paving the way for implementation in spintronics and information storage devices. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Generalitat Valenciana. Grant Numbers: CISEJI/2023/45, CIDEXG/2023/1 Spanish government. Grant Numbers: RED2022-134448-T, PID2023-146354NB-C41, PID2023-146354NB-C44, PID2022-136285NB-C32, PDC2023-145920-I00, PID2023-151946OB-I00, TED2021-132267B-I00, CNS2023-145151, CEX2019-000919-M, FPU21/04195, RYC2018-024736-I, RYC2021-034609-I Spanish Unidad de Excelencia “María de Maeztu” European Research Council Horizon 2020 research and innovation program European Union. Grant Numbers: ERC-2024-PoC-101185235-StEnSo, ERC-2021-StG-101042680 2D-SMARTiES, ERC-2018-StG-803092EMAGIN2D Spanish MIU FEDER/Junta de Castilla y León Research. Grant Number: SA106P23 USAL4Excellence program. Grant Number: 101034371, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural Layered Phlogopite Dielectric for Ultrathin Two-Dimensional Optoelectronics

  • Pucher, Thomas
  • Hernandez-Ruiz, Julia
  • Tajuelo-Castilla, G.
  • Martín-Gago, José A.
  • Munuera, C.
  • Castellanos-Gómez, Andrés
The integration of high-dielectric-constant (high-κ) materials with two-dimensional (2D) semiconductors is promising to overcome performance limitations and reach their full theoretical potential. Here, we show that naturally occurring phlogopite mica, exfoliated into ultrathin flakes, can serve as a robust high-κ dielectric layer for transition metal dichalcogenide-based 2D electronics and optoelectronics. The wide band gap (∼4.8 eV), high dielectric constant (∼11), and large breakdown field (>10 MV cm–1) of phlogopite enable transistors with subthreshold swings down to 100 mV dec–1, minimal hysteresis (∼30–60 mV), and interface trap densities comparable to those of state-of-the-art oxide dielectrics. Moreover, phototransistors built upon monolayer molybdenum disulfide (MoS2) and phlogopite exhibit responsivities up to 3.3 × 104 AW–1 and detectivities close to 1010 Jones, surpassing devices based on conventional gate insulators. We further demonstrate the versatility of this natural dielectric by integrating phlogopite/MoS2 heterostructures into NMOS inverters, showcasing robust voltage gains and low-voltage operation. Our findings establish phlogopite as a promising, earth-abundant dielectric for next-generation 2D transistor technologies and high-performance photodetection., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00, PRE2022-105538, and PID2023-149077OB-C31) and the Comunidad de Madrid (Project TEC-2024/TEC-308)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Van der Waals WS2/PdSe2 heterostructure as a visible-light photodetector and pressure optoelectronic sensor

  • Viscardi, Loredana
  • Mazzotti, Adolfo
  • Durante, Ofelia
  • Pucher, Thomas
  • Martucciello, Nadia
  • Castellanos-Gómez, Andrés
  • Di Bartolomeo, Antonio
Two-dimensional van der Waals heterostructures offer a versatile platform for developing multifunctional optoelectronic devices, as their tuneable electronic and optical properties enable a wide range of applications. Among them, WS2/PdSe2 heterostructures exhibit attractive features, making them promising candidates for the realisation of broadband photodetectors and pressure optoelectronic sensors. In this study, WS2/PdSe2 heterostructures were fabricated and electrically characterised under different environmental and light conditions. WS2/PdSe2 heterostructures exhibit n-type conduction with an impressive ON/OFF current ratio up to 108, demonstrating their suitability for high-performance electronic devices. Their electrical properties were extensively investigated under different pressure conditions, from ambient pressure to high vacuum (103–10−4 mbar), both in the dark and under illumination. The results reveal that the adsorption and desorption of water and oxygen molecules on the materials’ surface play a crucial role in modulating the electrical response of the WS2/PdSe2 heterostructure. Analysis of the light response in the visible spectrum reveals a responsivity of up to 1.2 A W−1 at a wavelength of 620 nm. WS2/PdSe2-based devices were further tested as pressure optoelectronic sensors, monitoring the photocurrent evolution during transitions between high vacuum and ambient pressure. These findings open the way for various applications in the field of optoelectronics and sensing., A.D.B. thanks the University of Salerno, Italy, for funding this project through Grant ORSA243813. A.C.G. acknowledges funding by the Ministry of Science and Innovation (Spain) through the Projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145 920-I00 and PID2023-151946OB-I00, and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically-linked heterostructures of palladium nanosheets and 2H-MoS2

  • Quirós‐Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gómez, Andrés
  • Arenal, Raúl
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
Special Section: EMRS 2024 ‐ Chemical Functionalization of 2D Materials., The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well-defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H-MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently-linked Pd nanosheet (PdNS)/functionalized MoS2 (f-MoS2) heterostructure is introduced, leveraging PdNS infrared-absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f-MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f-MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed-dimensional heterostructures., V.S. acknowledged funding from Project Nos. PID2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR). Authors would like to acknowledge Prof. Enrique Canovas for a fruitful discussion. Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.V.-M. acknowledges grants No. TED2021-131906A-100 and No. RYC2022-035200-I funded by Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.B. acknowledged Marie Skłodowska-Curie Actions programme MSCA-IF-2020-101030872. J.C.-G. acknowledged the MICINN-FEDER (No. PID2021-128313OB-I00), and support from the Regional Government of Madrid (NMAT2D-CM). J.C.G. also acknowledged a Research Consolidation Grant (No. CNS2022-36191 and PDC202-314587-1I00) from the Spanish Ministry of Science and Innovation. A.C.G. acknowledged funding from the Spanish Ministry of Science, Innovation and Universities (Grant Nos. TED2021-132267B-I00, PID2020-115566RB-I00, and PDC2023-145920-I00) and the EU FLAG-ERA project To2Dox (No. JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM project (No. Y2020/NMT-6661). IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (No. CEX2020-001039-S). INMA, CSIC-Universidad, researchers acknowledge support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (No. MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033). Authors also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa,” with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. R.A. and S.H. acknowledged funding from European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 889546, from the Gobierno de Aragón (DGA) under Project E13-23R, by the Spanish MICIU (No. PID2019-104739GB-100/AEI/10.13039/501100011033 and PID202-3151080N-BI00/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (No. PRTR-C17.I1) promoted by the Government of Aragon. The SEM and (S)TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed