Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure-induced phase transition on layered HgPSe3 revealed by optical, structural and vibrational studies

  • de Simoni, Beatriz
  • Oliva, Robert
  • Rybak, Milosz
  • Kopaczek, Jan
  • Tolloczko, Agata K.
  • Ibanez, Jordi
  • Dybala, Filip
  • Scharoch, Pawel
  • Plutnarova, Iva
  • Sofer, Zdenek
  • Botella, Pablo
  • Errandonea, Daniel
  • Antonatos, Nikolas
  • Kudrawiec, Robert
  • Gomis, O.|||0000-0001-6763-0638
[EN] The family of transition metal phosphorus trichalcogenides (MPX3, where M is a transition metal and X = S or Se) has recently attracted considerable attention due to their tunable band gaps and synergistic effects among electronic, magnetic, structural, and optical properties. We examine the influence of hydrostatic pressure on the optical, structural and vibrational properties of layered HgPSe3 through spectroscopic and diffraction techniques combined with first-principles calculations. Optical absorption measurements reveal a phase transition at 3.6 GPa, evidenced by a decrease in the band gap energy of approximately 200 meV, resulting in a change in sample color from bright to dark red. The same phase transition was confirmed by structural methods: powder X-ray diffraction and Raman spectroscopy. We propose that the compound undergoes a structural transition from its ambient pressure monoclinic phase to a high-pressure triclinic phase. Birch-Murnaghan fits give an experimental bulk modulus of B0 = 29.7 GPa, in very good agreement with the theoretical value of B0 = 28.1 GPa. Experimental pressure coefficients are obtained and compared with theoretical predictions. Our findings unveil a complex interplay between the structural and optical properties of HgPSe3 under pressure, which could be exploited to fabricate novel applications based on the tunable properties of van der Waals materials., B. d. S. acknowledges financial support from Marie Sk & lstrok;odowska-Curie Innovative Training Network (MSCA ITN (GA 956813)) within the Horizon 2020 Programme of the European Commission. N. A. and M. R. acknowledge funding from National Science Centre (NCN) Poland SONATA 19 Grant 2023/51/D/ST11/02588. R. O., J. I., O. G., P. B. and D. E. acknowledge ALBA synchrotron light source for funded experiments under proposals no. 2018093018 and 2023027486 at the BL04-MSPD beamline and support from the beamline scientist Dr Catalin Popescu. Z. S. was supported by ERC-CZ program (project LL2101) from Ministry of Education Youth and Sports (MEYS) and by the project Advanced Functional Nanorobots (reg. no. CZ.02.1.01/0.0/0.0/15_003/0000444 financed by the EFRR). M. R. acknowledges access to the BEM computing cluster provided by the Wroclaw Centre for Networking and Supercomputing (WCSS). P. B. and D. E. thank Generalitat Valenciana (GVA) for the Postdoctoral Fellowship No. CIAPOS/2023/406. This publication is financed by the Spanish Ministerio de Ciencia e Innovacion and the Agencia Estatal de Investigacion MCIN/AEI/10.13039/501100011033 as part of the project MALTA Consolider Team network (RED2022-134388-T), and I+D+i projects PID2022-138076NB-C41/C42 cofinanced by EU FEDER funds, by projects PROMETEO CIPROM/2021/075 (GREENMAT) and MFA/2022/007 financed by GVA. This study also forms part of the Advanced Materials program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by GVA through project MFA/2022/025 (ARCANGEL).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low T direct plasma assisted growth of graphene on sapphire and its integration in graphene/MoS2 heterostructure-based photodetectors

  • Muñoz, Roberto
  • López-Elvira, Elena
  • Munuera, C.
  • Carrascoso Plana, Félix
  • Xie, Yong
  • Çakıroğlu, Onur
  • Pucher, Thomas
  • Puebla, Sergio
  • Castellanos-Gómez, Andrés
  • García-Hernández, Mar
[EN] We report on outstanding photo-responsivity, R > 103 A/W, fast response (~0.1 s), and broadband sensitivity ranging from the UV to the NIR in two terminal graphene/MoS2 photodetectors. Our devices are based on the deterministic transfer of MoS2 on top of directly grown graphene on sapphire, and their performance outperforms previous similar photodetectors using large-scale grown graphene. Here we devise a protocol for the direct growth of transparent (transmittance, Tr > 90%), highly conductive (sheet resistance, R□ < 1 kΩ) uniform and continuous graphene films on sapphire at 700 °C by using plasma-assisted chemical vapor deposition (CVD) with C2H2/H2 gas mixtures. Our study demonstrates the successful use of plasma-assisted low-temperature CVD techniques to directly grow graphene on insulators for optoelectronic applications., We acknowledge funding from the innovation program under grant agreements No. 785219 (Graphene Core2-Graphene-based disruptive technologies) and No. 881603 (Graphene Core3-Graphene-based disruptive technologies). A.C.-G. acknowledges to grant agreement n° 755655, ECR-StG 2017 project 2D-TOPSENSE. O.C. acknowledges The European Union’s Horizon 2020 research and innovation program under the grant agreement 956813 (2Exciting). S.P. acknowledges the Spanish Ministry of Science and Innovation (Grant PRE2018-084818). Y.X. acknowledges the Key Research and Development Program of Shaanxi (Program No.2021KW-02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced strain transfer and optoelectronic performance in MoS2 devices via Formvar encapsulation

  • Vladimirov, Simeon N.
  • Cakiroglu, Onur
  • Munuera, C.
  • Castellanos-Gómez, Andrés
  • Vasconcelos, Thiago L.
4 figures, We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ∼−50 meV/%) and 6-fold (up to ∼−1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime., The Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00 and PID2023-151946OB-I00. The authors also acknowledge funding from the Comunidad de Madrid through the CAIRO-CM Project (Y2020/NMT-6661), European Union’s Horizon 2020 research and innovation program under the Grant Agreement 956813 (2Exciting) and European Research Council (ERC) through the project ERC-PoC 2024 project StEnSo (grant agreement no. 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain control of the electronic structure in WS2homobilayers with 0° and 60° stacking angles

  • Jadriško, V.
  • Landa-Garcia, I.
  • Novko, D.
  • Radatović, B.
  • Lei, Q.
  • Vujičić, N.
  • Gadermaier, C.
  • Castellanos-Gómez, Andrés
  • Xie, Yong
Two-dimensional transition metal dichalcogenides combine attractive semiconductor properties with exceptionally strong light–matter interaction. Their mechanical robustness allows the modulation of their optical and electronic functionalities via strain. Bilayers introduce the stacking angle as an additional parameter, whose role in the strain response is still elusive. Here, we combine differential reflectance spectroscopy and density functional theory calculations to explore the strain response of WS2 homobilayers with 0° and 60° stacking angles. The change of the excitonic resonance energies and linewidths depends on the stacking angle, highlighting the scope for the manipulation of the electronic structure of two-dimensional semiconductors via the synergistic harnessing of the strain and angle control parameters. This journal is © The Royal Society of Chemistry, 2026, This work received funding from the European Union's Horizon 2020 research and innovation program under grant agreement 956813 (2Exciting). D. N. and N. V. acknowledge support by the Centre of Excellence for Advanced Materials and Sensing Devices (Grant No. KK.01.1.1.01.0001) and Centre for Advanced Laser Techniques (Grant No. KK.01.1.1.05.0001) co-financed by the Croatian Government and the European Union through the European Regional Development Fund – Competitiveness and Cohesion Operational Program. A.C-G. acknowledges support from Grants PDC2023-145920-I00 and PID2023-151946OB-I00, funded by MICIU/AEI/10.13039/501100011033 and, respectively, by the European Union NextGenerationEU/PRTR (PDC2023-145920-I00) and by ERDF/EU (PID2023-151946OB-I00). A.C-G. also acknowledges funding from the European Research Council (ERC) through the ERC-PoC 2024 StEnSo project (grant agreement 101185235). ICMM-CSIC authors acknowledges support from the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/501100011033. This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (Grant No. SITP-NLIST-ZD-2024-01). I. L.-G., V. J. and C. G. acknowledge support by the PRIN 2020 project Conquest funded by the Italian Ministry of University and Research (Prot. 2020JZ5N9M)., Peer reviewed